Professional Documents
Culture Documents
I) Pole mounted HT substation (11/0.433 KV, LA, DO fuse, Metering etc) for receiving Grid power from
State Electricity Board.
II) 100KVA, 11/0.433 kV ONAN distribution transformer with HT cable termination box on primary side &
LT cable termination box on secondary side.
III) 415V Switch Board/PDB for receiving normal power at receiving station with Energy Saving device,
phase selection logic, timer for AC etc.
IV) HT Power cables, HT Termination kit.
V) Split AC system, stabilizer with 12 hrs timer.
VI) LT Power and Control cables.
VII) DC- DC converter of 110V, -48V and 24 V are required to supply various critical load like critical
lighting, Telecom, SCADA, Instrumentation etc.
VIII) Indoor & Outdoor lighting (Classified and Non-Classified type).
IX) Emergency and Critical lighting.
X) Earthling and Lightning protection system
XI) Local Control Stations (Classified and Non-Classified type)
XII) Lighting Distribution board (LDB).
XIII) Automatic Voltage Regulator indoor type.
XIV) Structural steel, cable tray, erection accessories etc as required.
XV) All panels like Solar, Switch board, AMF panel shall be equipped for mod bus communication.
Detailed Scope work & SOR are attached for your reference.
Construction Receiving Terminal at Guwahati
Detailed Scope work & SOR are attached for your reference.
General Layout of Project: - The sketch below is top plan for basic understanding of project.
The plot falls in catchment area of Brahmaputra River. The region is flood with water for the
entire Monsoon season i.e. 7 months. The outer retaining wall will be raised up to 8.5 Mt from
NGL. The inside plot area of retaining wall will be filled from borrowed earth up to FFL (8.5 Mtr)
The Dotted portion of Building , Store & Process area will be elevated vertically up to FFL on a
building support structure (a column & Beam Structure rising from pile caps up to 8.5 Mt above
NGL. Control Building (with RCC structure) will be constructed over building support structure.