Professional Documents
Culture Documents
1 Description
The slip-on coils can be replaced without opening the hy widespread use in mobile and industrial applications. These
draulic envelope and can be positioned at any angle coils are very adaptable in use, a benefit that is enhanced
through 360°. When combined with the appropriate core by various power ratings and an optional protection diode.
tube, the coils produce an on/off solenoid function or a pro The coil encapsulation and the plug base are glass-fibre re
portional solenoid function. Thanks to the wide variety of inforced thermoplastic.
connector types and voltages, these coils are suitable for
2 Symbol
Connector type to DIN EN 175301-803 All connector types except DIN EN 175301-803 (DC)
Direct current DC Alternating current AC Without protection diode With bipolar protection diode
IN IN IN
(DC)
IN
(40...60Hz)
UN
UN
R20
UN
UN
R20
R20
0.9xUN
ATTENTION! IMPORTANT!
Protection of AC solenoid coils. For solenoid coils with integrated rectifier as well
The rectifier built into the coil can be damaged by as for solenoid coils without protection diode and
high voltage spikes. for solenoid coils with bipolar protection diode the
To prevent AC coils from being destroyed, a mat two supply connections (UN) can be inter
ing connector with integral power varistor is re changed. The earth connection is marked with …
commended.
3 Technical data
Reference: 400-P-120120-EN-02
Issue: 07.2020 1/4
Electrical characteristics Description, value, unit
IMPORTANT!:
1)supply voltages > 75 VDC or 50 VAC only
possible with DIN EN 175301-803 connect.
Supply voltages / power ratings: cold value at cold value at max. warm value
+20°C -30°C
12VDC / 30 W 4.8Ω 3.8Ω 7.6Ω
24VDC / 31 W 18.6Ω 15.0Ω 29.1Ω
28VDC / 32 W 24.5Ω 19.7Ω 38.4Ω
36VDC / 32 W 40.5Ω 32.6Ω 63.5Ω
48VDC / 32 W 72.0Ω 57.9Ω 112.8Ω
96VDC / 32 W 288Ω 231Ω 451Ω
110VDC / 32 W 378Ω 304Ω 592Ω
127VDC / 32 W 504Ω 405Ω 790 Ω
200VDC / 32 W 1250Ω 1006 Ω 1957Ω
207VDC / 31 W 1400Ω 1126 Ω 2192Ω
220VDC / 32 W 1512Ω 1216Ω 2368Ω
2/4 400-P-120120-EN-02/07.2020
Solenoid coil, series D45/207…
Inductance / protection diode Description, value, unit
4 Dimensions
Coil with DIN EN plug connection Coil with Deutsch DT04-2P plug connection
S Standard-Type (see Ordering code) S Type DT with quenching diode (see Ordering code)
∅ 20.75 ∅ 20.75
45°
57.3
57.3
18.4 9
∅ 45 27.5 12 * ∅ 45 30.4
62 70.3
* Free space for 81.6
plug assembly
Coil with Junior Timer radial plug connection Coil with flying leads
S Type JT with quenching diode (see ordering code) S Type F (see ordering code)
∅ 20.75 ∅ 20.75
57.3
57.3
18.7
18.1
400-P-120120-EN-02/07.2020 3/4
Solenoid coil, series D45/207…
5 Installation information
Attention. Attention.
Because of the danger of overheating, the coil Delivery is done without mating connector.
must only be operated when it is properly fitted on
a valve. To prevent the ingress of water, both ends
of the coil on the core tube must be properly
sealed with O-rings.
6 Ordering code
Ex. MAG-SP D45/207 24 D _ 32W
MAG-SP = coil
D45/207= ∅45 mm (external ∅) / ∅20.75 mm (inside ∅)
... = voltage e.g. 24 (24 V),
see “Electrical characteristics” - supply voltage
D = current DC
A = current AC (only possible with DIN EN 175301-803 connect)
(blank) = standard plug connection to DIN EN (3-pole, 2 P+E) (IP65) mating plug not supplied
for the following plug-variants, please consult Bucher:
DT = Deutsch plug connection DT04-2P (with quenching diode, IP67/69K)
JT = Junior Timer radial plug connection (with quenching diode, IP65) mating plug not supplied
F = flying leads (600mm) (IP65)
… = Nominal power consumption, see “Electrical characteristics“
info.ch@bucherhydraulics.com www.bucherhydraulics.com
E 2021 by Bucher Hydraulics AG Frutigen, CH-3714 Frutigen
All rights reserved.
Data is provided for the purpose of product description only, and must not be construed as warranted characteristics in the legal sense. The
information does not relieve users from the duty of conducting their own evaluations and tests. Because the products are subject to continual
improvement, we reserve the right to amend the product specifications contained in this catalogue.
Classification: 430.395.…
4/4 400-P-120120-EN-02/07.2020
Solenoid coil, series D45/207…