Professional Documents
Culture Documents
1 Description
The slip-on coils can be replaced without opening the hy widespread use in mobile and industrial applications. These
draulic envelope and can be positioned at any angle coils are very adaptable in use, a benefit that is enhanced
through 360°. When combined with the appropriate core by various power ratings. The plug base are plastic. The
tube, the coils produce an on/off solenoid function or a pro body is zinc-nickel plated according to DIN 50979 and is
portional solenoid function. Thanks to the wide variety of thus suitable for use in the harshest operating environ
connector types and voltages, these coils are suitable for ments.
2 Symbol
Connector type to DIN EN 175301-803 IMPORTANT!
Direct current DC For solenoid coils with integrated rectifier as well
as for solenoid coils without protection diode the
IN
two supply connections (UN) can be inter
changed. The earth connection is marked with …
UN
R20
IN
UN
R20
3 Technical data
Reference: 400-P-120130-EN-00
Issue: 04.2020 1/4
General characteristics Description, value, unit
Ambient temperature range 14 W -30°C … +65°C (Prop.)
22 W -30°C … +65°C (ON/OFF)
8W -30°C … +80°C (ON/OFF)
Coil weight 530 g
IMPORTANT!:
1)supply voltages > 75 VDC or 50 VAC only
possible with DIN EN 175301-803 connect.
2/4 400-P-120130-EN-00/04.2020
Solenoid coil, series D45/22…
4 Dimensions
Coil with DIN EN plug connection Coil with Junior Timer axial plug connection
S Standard-Type G (see Ordering code) S Type I (see ordering code)
29.6 ∅22.1 20 ∅22.1
50.1
50.1
34.2
29.3
19.4
Coil with Deutsch DT04-2P plug connection Coil with AMPSEAL 16 axial plug connection
S Type T (see Ordering code) S Type A (see ordering code)
19.8 ∅22.1 19.8 ∅22.1
50.1
50.1
37.4
35
5 Installation information
Attention. Attention.
Because of the danger of overheating, the coil Delivery is done without mating connector.
must only be operated when it is properly fitted on
a valve.
6 Ordering code
Ex. COIL D45/22 _ 24 D _ 22W
COIL = coil
D45/22 = ∅45 mm (outside ∅) / ∅22 mm (inside ∅)
B = use for for a switching valves (8 W, 22 W)
P = use for for a prop. Valves (14 W)
... = voltage e.g. 24 (24 V),
see “Electrical characteristics” - supply voltage
D = current DC
G = standard plug connection to DIN EN (3-pole, 2 P+E) (IP65)
for the following plug-variants, please consult Bucher:
T = Deutsch plug connection DT04-2P 2-pole axial (IP67/69K)
I = Junior Timer plug connection 2-pole axial (IP65) mating plug not supplied
A = AMPSEAL plug connection 2-pole axial (IP67/69K)
… = Nominal power consumption, see “Electrical characteristics“
400-P-120130-EN-00/04.2020 3/4
Solenoid coil, series D45/22…
7 Related data sheets
Reference Description
400-D-9010002 Technical hints and tips – solenoid coils
info.ch@bucherhydraulics.com www.bucherhydraulics.com
E 2021 by Bucher Hydraulics AG Frutigen, CH-3714 Frutigen
All rights reserved.
Data is provided for the purpose of product description only, and must not be construed as warranted characteristics in the legal sense. The
information does not relieve users from the duty of conducting their own evaluations and tests. Because the products are subject to continual
improvement, we reserve the right to amend the product specifications contained in this catalogue.
Classification: 430.395.…
4/4 400-P-120130-EN-00/04.2020
Solenoid coil, series D45/22…