Professional Documents
Culture Documents
da
Product Information
Description
Advantage
Introduction
TianYe Acetal Copolymer(POM) is the base polymer,manufactured by the Chinese company CNOOC.
TianYe is produced in different grades with Various degrees of polymerization.
The base polymers have good colour and physical properties.
TianYe is the trade name.
The materials are supplied pre-dried and ready for processing in a variety of moisture proof bags.
Properties
M90 M270
Item Unit Test Method Standard Low
viscosity viscosity
Density g/cm³ ISO 1183 1.41 1.41
MFR(190℃/2.16kg) g/cm3 ISO 1133 9.0±0. 8 27.0±1.5
Tensile strength MPa ISO 527-1,2 64 61
Strain at break % ISO 527-1,2 42 40
Flexural strength MPa ISO 178 95 91
Flexural modulus MPa ISO 178 2,700 2550
Charpy impact strength (notched) kJ/m² ISO 179/1eA 5.8 4.5
Temperature of deflection under load (1.8MPa) ℃ ISO 75-1,2 95 100
-5
Coefficient of linear thermal expansion (23~55℃、Flow direction) x10 /℃ ISO 11359-2 12 11
-5
Coefficient of linear thermal expansion (23~55℃、Transverse direction) x10 /℃ ISO 11359-2 12 11
Dielectric breakdown strength (3mmt) kV/mm IEC 60243-1 19 19
14
Volume resistivity Ω·cm IEC 60093 1 x 10 1 x 1014
Surface resistivity Ω IEC 60093 1 x 1016 1 x 1016
Flammability - UL94 HB HB
Introduction
LOYOCON® Acetal Copolymer(POM) is the base polymer,manufactured by the Chinese company Kaifeng Longyu
Chemical Co., Ltd.
LOYOCON® is produced in different grades with Various degrees of polymerization.
The base polymers have good physical properties.
LOYOCON is the trade name.
The materials are supplied pre-dried and ready for processing in a variety of moisture proof bags.
Properties
*MC25: Stiff-lowing grades, for extrusion of sheets, rods and hollow profiles.
*MC90: Standard injection moulding grade.
*MC130: Easyflowing injection moulding grade for precision parts and thin-walled mouldings.
*MC270: Very easyflowing injection moulding grade for long flow paths,complicated precision parts,
thin-walled mouldings and multicavity molds.
Introduction
ShenHua Acetal Copolymer(POM) is the base polymer,manufactured by the Chinese company ShenHua Group.
The base polymers have good physical properties.
The price is more competitive.
The materials are supplied pre-dried and ready for processing in a variety of moisture proof bags.
Properties
MC90G MC270G
Item Unit Test Method Standard Low
viscosity viscosity
Density g/cm³ ISO 1183 1.41 1.41
MFR(190℃/2.16kg) g/cm3 ISO 1133 9.0±0. 8 27.0±1.5
Tensile strength MPa ISO 527-1,2 62 60
Strain at break % ISO 527-1,2 42 40
Flexural strength MPa ISO 178 85 83
Flexural modulus MPa ISO 178 2,700 2500
Charpy impact strength (notched) kJ/m² ISO 179/1eA 5.8 4.5
Temperature of deflection under load (1.8MPa) ℃ ISO 75-1,2 95 100
-5
Coefficient of linear thermal expansion (23~55℃、Flow direction) x10 /℃ ISO 11359-2 12 11
-5
Coefficient of linear thermal expansion (23~55℃、Transverse direction) x10 /℃ ISO 11359-2 12 11
Dielectric breakdown strength (3mmt) kV/mm IEC 60243-1 19 19
14
Volume resistivity Ω·cm IEC 60093 1 x 10 1 x 1014
Surface resistivity Ω IEC 60093 1 x 1016 1 x 1016
Flammability - UL94 HB HB
* MC90
90GG: Standard injection moulding grade.
* MC270
270GG: Very easyflowing injection moulding grade for long flow paths,complicated precision parts,
thin-walled mouldings and multicavity molds.
Important note
The information contained herein is based on the present state of our knowledge and experience. It does not imply
any legally binding warranty of certain properties or suitability of the product for a specific purpose. In view of the
many factors that may influence processing and application users should in any case run their own tests to
determine the suitability of the product for their particular purpose. Users of our product must assume responsibility
for observing existing proprietary rights, laws and regulations.