You are on page 1of 1

STEAM GENERATOR (AK, AX) AUTO DRAIN

SPECIFICATION SHEET

MODEL: AUTO DRAIN

Features
 Automatically flushes and drains generator tank

after each steam bath.


< Motorized ball valve attaches to generator drain

outlet.
 Installs on a new or existing Amerec steam

generator.

Installation
 All plumbing to be installed by a licensed plumbing
contractor and conform to local and national codes.
 An air gap or check valve may be required.

 Auto drain wires connect to a designated terminal

block inside the steam generator.

Item Number:

9210-200 ADK Automatic Drain Valve Kit for AK Series Generator, 3/4”

9210-205 ADX Automatic Drain Valve Kit for AX Series Generator, 3/4”

Not intended for use as installation instructions.


Refer to specific generator model installation instructions for further detail.

AMEREC STEAM
P.O. Box 2258 | 17683 128th Place NE, #C | Woodinville, WA 98072, USA
Toll-Free 1-800-331-0349
amerec@amerec.com | www.amerec.com

Amerec reserves the right to change specifications and design without notice.
© 2019 Amerec Steam

You might also like