Professional Documents
Culture Documents
In VCO IC 566, the value of charging & discharging is dependent on the voltage applied at ______.
A. Triangular wave output
B. Square wave output
C. Modulating input
D. All of the mentioned
ANSWER: C
According to transfer characteristics of PLL, the phase error between VCO output & incoming signal
must be maintained between _______ in order to maintain a lock.
A. 0 & π
B. 0 & π/2
C. 0 & 2π
D. π & 2π
ANSWER: A
Which among the following types of ADCs require/s the shortest conversion time?
A. Flash type
B. Successive Approximation
C. Dual Slope
ANSWER: A
In hysteresis width, the hysteresis voltage is equal to _______ upper & lower threshold voltages (V UT &
VLT).
A. sum of
B. difference between
C. product of
D. division of
ANSWER: B
Which among the following circuits is also known as ' Threshold Detector '?
A. Window detector
B. Over voltage indicator
C. Level detector
D. Zero crossing detector
ANSWER: C
If output is measured between two collectors of transistors, then the Differential amplifier with two input
signal is said to be configured as
A. Dual Input Balanced Output
B. Dual Input Unbalanced Output
C. Single Input Balanced Output
D. Dual Input Unbalanced Output
ANSWER: A
When load current flows into the feedback circuit, the configuration is said to be
A. Current-shunt feedback
B. Voltage-shunt feedback
C. Voltage-series feedback
D. Current-series feedback
ANSWER: B
Given voltage to current converter with floating load. Determine the output current?
A. 6mA
B. 4mA
C. 3mA
D. 2mA
ANSWER: D