Professional Documents
Culture Documents
Last updated March 6, 2017 by Tekla User Assistance | Software version: 2017
-
component.
Appearance
properties
Secondary part Aligns dimensions with the main or -
dimension neighboring part. Only for skewed clip
General
direction angles or shear plates.
tab
(Integrated
Position from Sets the start point for running dimensions.
dimensioning)
Only for skewed clip angles or shear plates
bolted to a neighboring part. Dimensioning
properties
(Integrated
Main part bolt On creates dimensions to the bolt hole
dimensioning)
position locations in the main part.
Dimensioning
properties
Main part skew Yes creates horizontal and vertical check
position dimensions representing the skew position -
-
Skew position Defines how Tekla Structures dimensions Dimension
skewed secondary part positions.
grouping
None creates no dimensions for skewed
tab
(Integrated
Option Description
dimensioning)
Dimensioning
secondary part positions.
Angle creates an angle dimension for the properties
secondary part. -
Dimensions creates dimensions for the Sub-assemblies
skewed position of the secondary part. tab
Both creates both the angle and the
(Integrated
dimensions.
dimensioning)
Dimensioning
Centered part Controls the dimensions of centrally-placed
parts. These settings have an effect only if properties
-
Elevation On creates elevation dimensions. Parts
dimension
tab
(GA
Combine equal Combines equal dimensions. The choices
drawings)
dimensions are None , 3*60 or 3*60=180.
The accuracy of combining equal
dimensions is 0.1.
See also
XS_PART_POSITION_TO_EDGE_NEAREST_TO_NEIGHBOUR
XS_WORKING_POINTS_VALID_ALSO_OUTSIDE_PART
Quick feedback
Did you find what you were
looking for? *
Yes
Partly
No
Submit