You are on page 1of 2

Lianyungang Unichem Trading Co.

,Ltd
#1703,21 Building,Heng’an Huafu,Qingkou Town,Ganyu,Lianyungang,China
Email: unichembob@163.com Tel:+86-15189038588

Wet Rubbing Fastness Improving Agent WF-801


Original wet rubbing fastness improving agent is poor deep dyeing for direct,
reactive ,indigo blue and sulfur dyestuffs, especially for dark black, bright red and
turquoise blue whose wet rubbing fastness is below Grade 1, while fabric wet
rubbing fastness exported to Europe and US must be above Grade 3. Therefore, our
company specially developed environment-friendly wet rubbing fastness improving
agent WF-801

Main composition
-- Special water-based polyurethane.

General properties
Appearance: light yellow to yellow liquid(darker as time going)
Ionicity : weakly cationic
PH: 3.5 ± 0.5
Solubility: easily soluble in normal water in any proportion at room temperature

Properties and fields of application


--Free of formaldehyde and APEO that belongs to environmental products and
complies with EU OEKO-TEX Standard 100 requirements.
--Use for fixing after cellulose fibres dyeing .Excellent wet rubbing fastness
improving performance that can meet above Grade 3 by improving more than 2
grades .
--Easy operation for using by direct dilution.
--Soft hand feeling, no influence on light fastness and resistant to washing.

Application
Based on different kind and concentration of dyes, different kind and pattern of
treated fabric, Dosage as below:

Exhaust (washing only)


WF-801: 2-4% (O.W.F) (Adjustment base on color)
Bath ratio: 1: 10 – 20
Dyed fabrics (pH ≦ 7) → Dip at 40℃ × 20 – 30 min →Dry

Padding:
WF-801: 30 – 50 g/L
Dyed fabrics (pH ≦7) → One dip & pad with water retention 80 – 85% → Dry

Notice
Prepared solution should be used immediately and make sure the working liquid at
Lianyungang Unichem Trading Co.,Ltd
#1703,21 Building,Heng’an Huafu,Qingkou Town,Ganyu,Lianyungang,China
Email: unichembob@163.com Tel:+86-15189038588

approx.25-40℃. Please test before using.


Please clean up the alkali (pH less than 7), salt and soaping agent of the fabric before
using wet rubbing fastness improving agent WF-801
Please clear away foaming or groove and change the working liquid because it will
have a lot of foam when it use for a long time.
Make sure pH at 5-6 as possible.

Packing and Storage


Packing: 125kgs,200kgs plastic drum and IBC drum
Storage: Keep it cool and dry, 6 months in sealed container at room
temperature.

You might also like