Professional Documents
Culture Documents
PRODUCT DECLARATION
DYNAMON NRG-500
DYNAMON NRG-670
DYNAMON NRG-700
An EPD should provide current information and may be updated if conditions change. The stated
validity is, therefore, subject to the continued registration and publication at www.environdec.com.”
PLANISFERO
Mapei main offices with factories Mapei Headquarters
SEMPRE
Mapei main offices with factories
R&D centres
The total size of the buildings is 24.000 sqm. The energy in these
R&D centres
PIÙ BLU.
Mapei commercial branch offices Mapei commercial branch offices
2
Mapei Nordic focuses both on energy and on logistic optimisation, 3. CONTENT DECLARATION
as for example the systematic Lean based improvement work. With
60 – 80 trailers per day, and 600 transport lines, requires Mapei to The main components and ancillary materials of the product
work actively on optimizing our logistic process. included in this EPD are the following:
The goal of the study is to provide necessary data and documentation
to produce an EPD according to the requirements of PCR Table 1: Composition referred to 1 kg of finished product with packaging
Environdec (version 1.11, 2021-02-05) under EN 15804:2012+A2:2019
Materials Percentage (%) by mass
and to have more comprehension about the environmental
impacts related to Dynamon NRG-500, Dynamon NRG-670 and Modified Acrylic Polymers < 60%
2. PRODUCT DESCRIPTION
3
5. SYSTEM BOUNDARIES AND ADDITIONAL
TECHNICAL INFORMATION
Recycling-potential
Waste processing
Reuse-Recovery-
De-construction
Refurbishment
Manufacturing
Replacement
Maintenance
Construction
Operational
Operational
installation
energy use
demolition
water use
Transport
Transport
Transport
Disposal
Repair
Use
Module A1 A2 A3 A4 A5 B1 B2 B3 B4 B5 B6 B7 C1 C2 C3 C4 D
Modules declared X X X MND MND MND MND MND MND MND MND MND MND MND MND MND MND
4
A brief description of production process is the following: 6. CUT-OFF RULES AND ALLOCATION
The production process starts from raw materials, that are purchased Criteria for the exclusion of inputs and outputs (cut-off rules) in
from external and intercompany suppliers and stored in the plant. the LCA, information modules and any additional information are
Bulk raw materials are stored in specific silos and added automatically intended to support an efficient calculation procedure. They are
in the production mixer, according to the formula of the product. not applied in order to hide data. Cut-off criteria, where applied, are
Other raw materials, supplied in bags, big bags or plastic 1000 lt IBC, described in Table 3.
are stored in their warehouse and added automatically or manually
to the mixer. The production is a discontinuous process, in which Table 3: Cut-off criteria
all the components are mechanically mixed in batches. The semi- Process excluded Quantified contribution
Cut-off criteria
from study from process
finished product is then packaged in plastic 1000 lt IBC or managed
Sensitivity study demonstrates a
in bulk. The quality of final products is controlled before the sale. A3: production Less than 10-5 kg/kg
relative contribution lower than
(auxiliary materials) of finished product
0,5%
Sensitivity study demonstrates a
A3: waste and Less than 10-4 kg/kg
relative contribution lower than
Figure 1: Production process particle emission of finished product
0,5%
5
7. ENVIRONMENTAL PERFORMANCE
AND INTERPRETATION
Climate change
GWPtotal - Global Warming Potential refers to the Photochemical ozone formation
emission/presence of GHGs (greenhouse gases) in the The Photochemical Ozone Creation Potential is the
atmosphere (mainly CO2, N2O, CH4) which contribute to ozone formation in low atmosphere. This is quite
the increase in the temperature of the planet. common in the cities where a great amount of
GWP-total considers: pollutants (like VOC and NOx) are emitted every day
- GWP-fossil (industrial emissions and vehicles). It is mainly diffused
GWP - GWP-biogenic during the summertime.
POCP
- GWP-LULUC (land use and land use change)
Ozone Depletion
Ozone Depletion Potential refers to the degradation of Depletion of abiotic resources – minerals and metals
the stratospheric layer of the ozone involved in blocking Abiotic Depletion Potential elements refers to the
the UV component of sunrays. Depletion is due to depletion of the mineral resources.
particularly reactive components that originate from
chlorofluorocarbon (CFC) or chlorofluoromethane (CFM). ADP
ODP minerals&metals
Acidification
Depletion of abiotic resources – fossil fuel
Acidification Potential refers to the emission of
Abiotic Depletion Potential fossil fuel refers to the
specific acidifying substances (i.e. NOx, SOx) in the air.
depletion of the fossil fuel resources.
These substances decrease the pH of the rainfall with
predictable damages to the ecosystem.
AP ADP - fossil
Eutrophication
Eutrophication Potential refers to the nutrient
enrichment, which determines unbalance in ecosystems
Water use
and causes the death of the fauna and decreased
It expresses the potential deprivation of water, that
biodiversity in flora.
consists in not having the water needs satisfied.
It considers:
- EP-freshwater: acquatic freshwater
EP - EP-marine: acquatic marine WDP
- EP-terrestrial
6
The following tables show the environmental impacts for the products considered according to the requirements of EN15804:2012+A2:2019.
The results are referred to the declared unit (see § 4). The additional environmental indicators are not declared.
DYNAMON NRG-500
(1 kg finished product in bulk)
Table 5: DYNAMON NRG-500: Potential environmental impact – mandatory Table 6: DYNAMON NRG-500: Potential environmental impact – additional
indicators according to EN 15804 referred to 1 kg of finished product in bulk mandatory and voluntary indicators referred to 1 kg of finished product in bulk
GWPTOTAL (kg CO2 eq.) 5,93E-01 GWP-GHG (kg CO2 eq.) 1,80E-01
GWPFOSSIL (kg CO2 eq.) 1,88E-01 GWP-GHG: The indicator includes all greenhouse gases included in GWP-total
GWPBIOGENIC (kg CO2 eq.) -4,02E-03 but excludes biogenic carbon dioxide uptake and emissions and biogenic carbon
stored in the product. This indicator is thus equal to the GWP indicator originally
GWPLULUC (kg CO2 eq.) 2,91E-04 defined in EN 15804:2012+A1:2013.
ODP (kg CFC 11 eq.) 1,55E-08
AP (mol H eq.)
+
2,81E-03 Table 7: DYNAMON NRG-500: Use of resources referred to 1 kg of finished product in bulk
EPFRESHWATER (kg (PO4)3- eq.) 2,28E-01
Indicator Unit A1-A3
EPMARINE (kg N eq.) 6,03E-04
PERE MJ 6,59E-01
EPTERRESTRIAL (mol N eq.) 7,70E-03
PERM MJ 4,93E-02
POCP (kg NMVOC eq.) 1,80E-03
ADPMINERALS&METALS (kg Sb eq.) 1,43E-06 PERT MJ 7,08E-01
7
Table 8: DYNAMON NRG-500: Waste production and output flows referred to 1 kg
of finished product in bulk
DYNAMON NRG-670
(1 kg finished product in bulk)
Indicator Unit A1-A3
HWD kg 1,04E-05 Table 10: DYNAMON NRG-670: Potential environmental impact – mandatory
NHWD kg 1,71E-02 indicators according to EN 15804 referred to 1 kg of finished product in bulk
HWD: Hazardous waste disposed; NHWD: Non-Hazardous waste disposed; RWD: EPFRESHWATER (kg (PO4)3- eq.) 1,97E-01
Radioactive waste disposed EPMARINE (kg N eq.) 5,12E-04
EPTERRESTRIAL (mol N eq.) 6,57E-03
Table 9: DYNAMON NRG-500: Information on biogenic carbon content at the POCP (kg NMVOC eq.) 1,52E-03
factory gate referred to 1 kg of finished product in bulk
ADPMINERALS&METALS (kg Sb eq.) 1,03E-06
Biogenic Carbon Content Unit Quantity
ADPFOSSIL (MJ) 1,72E+01
Biogenic carbon content in product kg C 0,00E+00 WDP (m3 world eq.) 9,32E-02
Biogenic carbon content in packaging kg C 0,00E+00 GWPTOTAL: Global Warming Potential total; GWPFOSSIL: Global Warming Potential
fossil fuels; GWPBIOGENIC: Global Warming Potential biogenic; GWPLULUC: Global
Warming Potential land use and land use change; ODP: Depletion Potential of the
stratospheric Ozone layer; AP: Acidification Potential; EPFRESHWATER: Eutrophication
Potential, freshwater; EPMARINE: Eutrophication Potential, marine; EPTERRESTRIAL:
Eutrophication Potential, terrestrial; POCP: Formation potential of tropospheric
ozone; ADPMINERALS&METALS: Abiotic Depletion Potential for non-fossil resources;
ADPFOSSIL: Abiotic Depletion Potential for fossil resources; WDP: Water Deprivation
Potential.
8
Table 12: DYNAMON NRG-670: Use of resources referred to 1 kg of finished product Table 13: DYNAMON NRG-670: Waste production and output flows referred to 1 kg
in bulk of finished product in bulk
FW m3 3,06E-03 HWD: Hazardous waste disposed; NHWD: Non-Hazardous waste disposed; RWD:
Radioactive waste disposed
PERE: Use of renewable primary energy excluding renewable primary energy
resources used as raw materials; PERM: Use of renewable primary energy
resources used as raw materials; PERT: Total use of renewable primary energy Table 14: DYNAMON NRG-670: Information on biogenic carbon content at the
resources (primary energy and primary energy resources used as raw materials); factory gate referred to 1 kg of finished product in bulk
PENRE: Use of non-renewable primary energy excluding non-renewable primary
energy resources used as raw materials; PENRM: Use of non-renewable primary Biogenic Carbon Content Unit Quantity
energy resources used as raw materials; PENRT: Total use of non-renewable
primary energy resources (primary energy and primary energy resources used as Biogenic carbon content in product kg C 0,00E+00
raw materials); SM: Use of secondary material; RSF: Use of renewable secondary
Biogenic carbon content in packaging kg C 0,00E+00
fuels; NRSF: Use of non-renewable secondary fuels; FW: Net use of fresh water.
9
DYNAMON NRG-670
(1 kg finished product + IBC)
Table 15: DYNAMON NRG-670: Potential environmental impact – mandatory Table 16: DYNAMON NRG-670: Potential environmental impact – additional
indicators according to EN 15804 referred to 1 kg of finished product with IBC mandatory and voluntary indicators referred to 1 kg of finished product with IBC
GWPTOTAL (kg CO2 eq.) 5,50E-01 GWP-GHG (kg CO2 eq.) 1,96E-01
GWPFOSSIL (kg CO2 eq.) 2,03E-01 GWP-GHG: The indicator includes all greenhouse gases included in GWP-total
GWPBIOGENIC (kg CO2 eq.) -8,61E-03 but excludes biogenic carbon dioxide uptake and emissions and biogenic carbon
stored in the product. This indicator is thus equal to the GWP indicator originally
GWPLULUC (kg CO2 eq.) 2,62E-04 defined in EN 15804:2012+A1:2013.
ODP (kg CFC 11 eq.) 1,45E-08
AP (mol H eq.)
+
2,58E-03 Table 17: DYNAMON NRG-670: Use of resources referred to 1 kg of finished product
EPFRESHWATER (kg (PO4)3- eq.) 1,97E-01 with IBC
10
Table 18: DYNAMON NRG-670: Waste production and output flows referred to 1 kg
of finished product with IBC
DYNAMON NRG-700
(1 kg finished product in bulk)
Indicator Unit A1-A3
HWD kg 8,85E-06 Table 20: DYNAMON NRG-700: Potential environmental impact – mandatory
NHWD kg 2,42E-02 indicators according to EN 15804 referred to 1 kg of finished product in bulk
HWD: Hazardous waste disposed; NHWD: Non-Hazardous waste disposed; RWD: EPFRESHWATER (kg (PO4)3- eq.) 2,41E-01
Radioactive waste disposed EPMARINE (kg N eq.) 5,86E-04
EPTERRESTRIAL (mol N eq.) 7,65E-03
Table 19: DYNAMON NRG-670: Information on biogenic carbon content at the POCP (kg NMVOC eq.) 1,72E-03
factory gate referred to 1 kg of finished product with IBC
ADPMINERALS&METALS (kg Sb eq.) 7,04E-07
Biogenic Carbon Content Unit Quantity
ADPFOSSIL (MJ) 2,01E+01
Biogenic carbon content in product kg C 0,00E+00 WDP (m3 world eq.) 8,50E-02
Biogenic carbon content in packaging kg C 1,90E-03 GWPTOTAL: Global Warming Potential total; GWPFOSSIL: Global Warming Potential
fossil fuels; GWPBIOGENIC: Global Warming Potential biogenic; GWPLULUC: Global
Warming Potential land use and land use change; ODP: Depletion Potential of the
stratospheric Ozone layer; AP: Acidification Potential; EPFRESHWATER: Eutrophication
Potential, freshwater; EPMARINE: Eutrophication Potential, marine; EPTERRESTRIAL:
Eutrophication Potential, terrestrial; POCP: Formation potential of tropospheric
ozone; ADPMINERALS&METALS: Abiotic Depletion Potential for non-fossil resources;
ADPFOSSIL: Abiotic Depletion Potential for fossil resources; WDP: Water Deprivation
Potential.
11
Table 22: DYNAMON NRG-700: Use of resources referred to 1 kg of finished product Table 23: DYNAMON NRG-700: Waste production and output flows referred to 1 kg
in bulk of finished product in bulk
FW m3 2,82E-03 HWD: Hazardous waste disposed; NHWD: Non-Hazardous waste disposed; RWD:
Radioactive waste disposed
PERE: Use of renewable primary energy excluding renewable primary energy
resources used as raw materials; PERM: Use of renewable primary energy
resources used as raw materials; PERT: Total use of renewable primary energy Table 24: DYNAMON NRG-700: Information on biogenic carbon content at the
resources (primary energy and primary energy resources used as raw materials); factory gate referred to 1 kg of finished product in bulk
PENRE: Use of non-renewable primary energy excluding non-renewable primary
energy resources used as raw materials; PENRM: Use of non-renewable primary Biogenic Carbon Content Unit Quantity
energy resources used as raw materials; PENRT: Total use of non-renewable
primary energy resources (primary energy and primary energy resources used as Biogenic carbon content in product kg C 0,00E+00
raw materials); SM: Use of secondary material; RSF: Use of renewable secondary
Biogenic carbon content in packaging kg C 0,00E+00
fuels; NRSF: Use of non-renewable secondary fuels; FW: Net use of fresh water.
12
Tables from 5 to 24 show absolute results for all the environmental 8. DATA QUALITY
categories considered.
The main contribution to all the environmental impact categories Table 25: Data quality
in the product life cycle comes from extraction and processing Temporary
Dataset & Geographical reference Database (source)
of raw materials (module A1). The contribution of raw material reference
A1; A3
transport (module A2) is visible only for eutrophication categories
Sphera database;
and GWPLULUC. The production stage (module A3) is relevant only for Modified Acrylic Polymers
ecoinvent 3.6;
2019
Dynamon NRG-670 packaged in IBC. In particular, the GWPBIOGENIC
Water Sphera database; 2020
has a negative value due to the packaging components. For the
Sphera database;
Additives (EU) 2019
other products the impact related to the product stage is negligible. coinvent 3.6
Electricity grid mix (IT, NO) Sphera database 2017
More details about electrical mix used in this EPD, is shown below A2
All data included in table above refer to a period between 2017 and
2020; the most relevant ones are specific from supplier, while the
others (i.e. transport and minor contribution dataset), come from
European and global databases.
All dataset are not more than 10 years old according to EN 15804
§6.3.8.2 “Data quality requirements”.
Primary data concern the year 2019 and represent the whole annual
production.
13
9. REQUISITE EVIDENCE 10. VERIFICATION AND REGISTRATION
9.1 Indication for the calculation of Module A4 The EPD owner has the sole ownership, liability, and responsibility
(Transport from the factory to the jobsite) for the EPD.
EPDs within the same product category but from different
In order to calculate the impact related to the transport of 1 kg of programmes may not be comparable. EPDs of construction
product from the factory gate (Sagstua) to the jobsite, you can use products may not be comparable if they do not comply with EN
the following formula: 15804. For further information about comparability, see EN 15804
and ISO 14025.
Transport Impact = EF (kg/DU) * distance (km)
CEN standard EN15804 served as the Core Product Category Rules (PCR)
Table 26: The EFs are related to 1 kg of product transported with truck Euro5
Impact Category Unit EF (Emission Factor) PCR: PCR 2019:14 Construction products (EN
15804:A2), Version 1.11, 2021-02-05, UN
GWPTOTAL (kg CO2 eq.) 4,83E-05
CPC code 54
GWPFOSSIL (kg CO2 eq.) 4,80E-05
GWPBIOGENIC (kg CO2 eq.) -5,70E-08 PCR review was conducted by: The Technical Committee of the
International EPD® System. See
GWPLULUC (kg CO2 eq.) 3,91E-07
www.environdec.com/TC for a list of
ODP (kg CFC 11 eq.) 9,45E-21 members.
AP (mol H+ eq.) 1,44E-07 Review chair: Claudia A. Peña,
University of Concepción, Chile. The
EPFRESHWATER (kg (PO4)3- eq.) 1,42E-10
review panel may be contacted via
EPMARINE (kg N eq.) 6,53E-08 the Secretariat www.environdec.com/
EPTERRESTRIAL (mol N eq.) 7,30E-07 contact.
POCP (kg NMVOC eq.) 1,30E-07
Independent third-party verification of EPD Process Certification
ADPMINERALS&METALS (kg Sb eq.) 4,24E-12 the declaration and data, according to
ADPFOSSIL (MJ) 6,38E-04 ISO 14025:2006: EPD Verification
WDP (m3 world eq.) 4,44E-07
Third party verifier: Certiquality S.r.l.
Number of accreditation: 003H rev15
Example:
If the product is transported from Sagstua (production plant) to Accredited or approved by: Accredia
Oslo (Jobsite) for around 90 km, the GWP impact result is:
Procedure for follow-up of data Yes
during EPD validity involves
GWPTOTAL = 4,83E-05 * 90 km = 4,35E-03 kg CO2eq
third-party verifier No
14
11. REFERENCES CONTACT INFORMATION
PROCEDURES www.mapei.it;
Environmental Sustainability Office
• ISO 14044 ENVIRONMENTAL MANAGEMENT – LIFE CYCLE
ASSESSMENT – REQUIREMENTS AND GUIDELINES Programme operator:
Website: www.environdec.com
E-mail: info@environdec.com
15
(GB) 04/21
HEAD OFFICE
MAPEI SpA
Via Cafiero, 22 - 20158 Milan
Tel. +39-02-37673.1
mapei.com
mapei@mapei.it