Professional Documents
Culture Documents
Total
WORLD WIDE
130 COUNTRIES
we have 98,000 employees 1.8 $ 149.7
who are COMMITTED TO BETTER ENERGY MB/DAY
OF REFINED
B
PRODUCTS SOLD REVENUE
Lubricants | Energizing performance. Every day Fuel | Energizing life. Every day
General Lubrication
07 ANTIFREEZE AND COOLANTS 13 D
ETERGENTS 17 HEAT TRANSFER FLUIDS
08 CIRCULATION OILS AND CLEANING FLUIDS
• DEGREASERS 18 HYDRAULIC SYSTEMS
• CIRCULATION OILS
• DETERGENTS • HM HYDRAULC FLUIDS: FOR HIGH
• CIRCULATION OILS FOR
PAPERMAKING MACHINES 14 ENGINE OILS TEMPERATURES AND PRESSURES 22 PROCESS OILS
• HIGH TEMPERATURE CHAIN OILS • HV HYDRAULIC FLUIDS: FOR LOW • WHITE OILS
• GAS ENGINES
• OILS FOR STEAM CYLINDER ENGINES TEMPERATURES AND VASELINES
• DIESEL ENGINES FOR
• BIODEGRADABLE HYDRAULIC FLUIDS • VEGETABLE OILS FOR
STANDBY UNITS
10 COMPRESSORS • FIRE-RESISTANT HYDRAULIC FLUIDS THE AGRIFOOD INDUSTRY
• AIR COMPRESSORS 15 GEARS • PROCESS OILS
• REFRIGERATING COMPRESSORS 21 HYPERCOMPRESSORS
• MINERAL GEAR OILS
• GAS COMPRESSORS • SYNTHETIC GEAR OILS
24 TRANSFORMER OILS
21 PNEUMATIC SYSTEMS
• VACUUM PUMPS • SPECIAL OILS
25 TURBINES
26
Grease
27 LITHIUM / CALCIUM GREASES 33 C
ALCIUM SULFONATE COMPLEX 36 CALCIUM GREASES
GREASES • CALCIUM SOAP GREASES
29 LITHIUM COMPLEX GREASES • MINERAL GREASES • CALCIUM COMPLEX GREASES
• SYNTHETIC GREASES
30 ALUMINIUM COMPLEX GREASES 37 SPECIFIC GREASES
• SPECIALITIES
32 POLYUREA GREASES • CALCIUM SULFONATE COMPLEX GREASES
37 AUTOMATIC LUBRICATORS
Metalworking Aviation
39 CUTTING MACHINING GRINDING 48 ROLLING OILS 52 PISTON ENGINES
• NEAT CUTTING OILS • ROLLING BASE OILS LUBRICANTS
• SOLUBLE CUTTING FLUIDS • ADDITIVE CONCENTRATES
53 GEAR OILS
• SCRUBBING OILS
44 ELECTRICAL DISCHARGE 53 HYDRAULIC FLUID
MACHINING 49 RUST PREVENTIVE
• CIRCULATION OILS • PROTECTION OILS 53 ENGINE PROTECTION LUBRICANT
61 OILS
62 GREASES
63 AEROSOLS
54 63 SPECIFIC PRODUCTS
Textile
64
55 CONING 57 NON WOVEN
• CONING OILS FOR YARN TWISTING, • ANTISTATIC LUBRICANTS
COVERING, TEXTURIZING, WINDING FOR NON WOVENS IN NEEDLE
PUNCHING AND TUFTING
Services
56 KNITTING
• NEEDLE OILS FOR CIRCULAR 57 WEAVING 64 ANAC INDUS - ANAC
AND FLATBED KNITTING • OVEROILING LUBRICANTS AND SIZING AGENTS SOLUBLE CHECK
FOR WEAVING, WARPING AND BEAMING
56 CARDING/COMBING 64 TRAINING
• ANTISTATIC LUBRICANTS 58 FINISHING 65 TIG 6
FOR STAPLE FIBER PREPARATION • RINSING BATH CONING OILS FOR BOBBIN DYEING
(CARDING, COMBING) • DETERGENTS 65 TECHNICAL ASSISTANCE
• NEEDLE OILS FOR SEWING MACHINES 65 THERMOGRAPHIC INSPECTION
WT Aqueous concentrate of specific organic • Diesel industrial engines and gas engines • Long life anticorrosion and anticavitation protection. MWM (Deutz) • Wärtsilä
-
SUPRA corrosion and cavitation inhibitors requiring no antifreeze protection. • Optimal heat transfer capacity. Non-polluting components. • Rolls-Royce: Bergen • GE Jenbacher
TOTAL NEVASTANE •C
ooling circuits, including drinks, ice creams • Antifreeze protection: -15 °C to -40 °C depending on % of dilution.
MPG based antifreeze NSF HT1
ANTIFREEZE and frozen food processing. • Specific protection of alloys and metal equipment against corrosion.
BIODEGRADABLE H1 suitable for incidental food contact 3H suitable for direct food contact General Lubrication 7
BIODEGRADABLE H1 suitable for incidental food contact 3H suitable for direct food contact General Lubrication 8
BIODEGRADABLE H1 suitable for incidental food contact 3H suitable for direct food contact General Lubrication 9
NSF H1 • Kosher
TOTAL NEVASTANE • Air compressors.
Synthetic PAO • Very high equipment protection level , even under severe conditions. 32 to 100 • Halal ISO 6743-6 CKC
SH • Adapted to the severe environment of the Agrifood Industries.
• ISO 6743-4 HV • ISO 21469
BIODEGRADABLE H1 suitable for incidental food contact 3H suitable for direct food contact General Lubrication 10
PLANETELF •G
ood compatibility behaviour and miscibility with R-134a and/or
Synthetic PAG • Car air conditioning compressors using R-134a and/or R-1234yf. 46,100,130 ISO 6743-3 DRD
PAG R-1234yf Specific packaging to limit the water absorption.
BIODEGRADABLE H1 suitable for incidental food contact 3H suitable for direct food contact General Lubrication 11
PV 100 oils are destined for the lubrication of rotary and reciprocating vacuum pumps. • Constant tightness due to the very low variation of viscosity during the entire oil
Their performance over time is garanteed by the properties of the fluid: service life.
• Less consumption of fluid due to low volatility. • Absence of product degradation and residue formation due to excellent oxidation
• Achievement of ultimate vacuum of the pumps, ensured by the low saturating vapour resistance.
pressure of the lubricant.
VACUUM PUMPS PV
PRODUCT NATURE APPLICATIONS SPECIFIC ADVANTAGES VISCOSITY* SPECIFICATIONS
PV • Vacuum pump.
Mineral 125 ISO 6743-3 DVC
100 • Extraction of neutral gas.
PV • Vacuum pump.
Mineral 125 ISO 6743-3 DVC
100 PLUS • Extraction of moist air.
PV • Alternating and rotary vacuum pump.
Semi-synthetic • S uitable for incidental food contact. 100 NSF H1• ISO 6743-3 DVD
SH 100 • Extraction of acid or corrosive gases.
BIODEGRADABLE H1 suitable for incidental food contact 3H suitable for direct food contact General Lubrication 12
DEGREASERS FINASOL
PRODUCT NATURE APPLICATIONS SPECIFIC ADVANTAGES DENSITY** SPECIFICATIONS
•D egreasing involving mechanical devices: machined parts,
FINASOL chassis, machine tool frames, bearings, pinions, filters, • Rapid evaporation.
Rapid evaporation degreaser 785
BAC injection moulds. • Compatible with all metals, most plastics and elastomers.
• Surface preparation prior to assembly.
FINASOL
Special emulsifiable hydrocarbon degreaser • Cleaning of all engines: cars, trucks, boats. • Compatible with most plastics and elastomers. 805
HD
Synthesis hydrocarbon • Odorless.
FINASOL •D
egreaser and cleaner for the Agrifood Industries: machine
Benzene-free • Compatible with metals, glass, ceramics, composite materials, 742 NSF K1
FPI parts, chassis machine tools, bearings, pinions, filters, chains.
Aromatic-free most thermoplastics and thermosets insensitive to organic solvents.
FINASOL • Conducive to complete emulsification of oil based soils and
Emulsifiable degreaser • Multipurpose. 809
MF separation of the insoluble components.
Pure or diluted degreasing agent Easily biodegradable according
FINASOL • Cleaning of all engines, elimination of fuels and resins, removes •O
dorless, biodegradable and non toxic.
100% vegetal based 855 to OECD 301 B test.
BIO tar, bitumen, floor cleaning. •N
ot aggressive to elastomers or plastics.
VOC free Fully biodegradable according to OECD 302 C test.
FINADET • Degreaser and cleaner for the Agrifood Industries: metal or NSF A1
Special agrifood detergent • Meets the requirements of the Food Industries. 1086
FPI plastic parts, vehicles designed for transportation of foodstuffs. Menthol perfume
FINADET • Automatic.
Special washing machine detergent • Special cleaning of parts placed in closed washing machines. 742
SW • Foam free.
BIODEGRADABLE H1 suitable for incidental food contact 3H suitable for direct food contact General Lubrication 13
BIODEGRADABLE H1 suitable for incidental food contact 3H suitable for direct food contact General Lubrication 14
BIODEGRADABLE H1 suitable for incidental food contact 3H suitable for direct food contact General Lubrication 15
BIODEGRADABLE H1 suitable for incidental food contact 3H suitable for direct food contact General Lubrication 16
JARYTHERM® A REGISTERED MARK BY ARKEMA. * Typical kinematic viscosity of base oil at 40 °C in mm2/s
BIODEGRADABLE H1 suitable for incidental food contact 3H suitable for direct food contact General Lubrication 17
HM HYDRAULIC FLUIDS: FOR HIGH TEMPERATURES AND PRESSURES AZOLLA / TOTAL NEVASTANE
PRODUCT APPLICATIONS SPECIFIC ADVANTAGES ISO VG SPECIFICATIONS
• Reinforced protection of the equipment thanks to anti-wear and anticorrosion
properties. ISO 11158 HM • DIN 51524-2 HLP
AZOLLA • Hydraulic systems operating in high temperature and pressure conditions.
• Considerable service life for the fluid and preventing deposits, ensured 10 to 150 • Eaton I-286S, M-2950S
ZS • Bearings and miscellaneous devices.
by thermal stability and resistance to oxidation. • Denison HF0, HF1, HF2
• Filterability even in the presence of water.
• Formation deposits prevented due to ashless additives.
• Hydraulic systems especially sensitive to the formation of deposits and/or operating in high ISO 11158 HM • DIN 51524-2 HLP
AZOLLA • Very good anti-wear and thermal stability performances.
temperature and pressure conditions. 22 to 100 • Eaton I-286S, M-2950S
AF • Very good filterability in service even in the presence of water.
• Bearings and miscellaneous equipment. • Denison HF0, HF1, HF2
• Extension of oil drain intervals. TOST = 4000 hours.
• All hydraulic systems, in particular when the presence of water is inevitable • Excellent hydrolysis stability thanks to ashless additives. ISO 11158 HM • ISO 12925 CKC
AZOLLA
and the draining of water impossible. • Detergent fluid preventing deposits in the circuits. 10 to 68 • DIN 51524-2 HLPD
DZF
• Miscellaneous devices calling for extreme-pressure properties. • Reinforced extreme-pressure properties. • Müller Weingarten • MAN N698 HLPD
• Synthetic oil avoids staining rolled metal in the event of a leak in the hydraulic circuit.
AZOLLA
• Hydraulic systems of aluminium, stainless steel or copper rolling mills. • Reduction in the formation of deposits. 15 to 68
AL
• Anticorrosion protection even in the presence of water.
• Dispersant and detergent fluid limiting deposits.
AZOLLA • Hydrokinetic transmissions and couplings. ISO 6743-4 HM • DIN 51524 HLPD Voith Turbo
• Very good load capacity (FZG>12) and anti-wear protection. 32
VTR • Specially designed for turbo-transmissions, Voith Turbo gear boxes. • SNCF
• Thermal stability. Very low foaming.
• Very good equipment protection power.
TOTAL NEVASTANE NSF H1 • Kosher • Halal
• Hydraulic systems operating under severe conditions. • Increased equipment service life. 22 to 68
AW ISO 6743-4 HM • ISO 21469
• Miscibility with mineral fluids.
BIODEGRADABLE H1 suitable for incidental food contact 3H suitable for direct food contact General Lubrication 18
BIODEGRADABLE H1 suitable for incidental food contact 3H suitable for direct food contact General Lubrication 19
HYDRANSAFE • Fire resistant fluid containing a high proportion of water. ISO 6743-4 HFC
Water-Glycol based water resistant fluid • Operating temperatures: -20 °C to +60 °C. 46
HFC 146 • Adapted to low temperatures. • Danieli • Müller Weingarten
HYDRANSAFE • Operating temperature: -10 °C to +70 °C on a continuous basis, • E xcellent fire resistance.
Esters based fire resistant fluid 68 ISO 6743-4 HFDU
HFDU LC 168 +120 °C at peak periods. • Anti-wear properties.
SERVICE PRODUCTS. BLUE CONCENTRATE: Blue dye for hydraulic fluids and other mineral lubricants, enabling early detection of leaks.
BIODEGRADABLE H1 suitable for incidental food contact 3H suitable for direct food contact General Lubrication 20
ORITES
PRODUCT NATURE APPLICATIONS SPECIFIC ADVANTAGES VISCOSITY* SPECIFICATIONS
ORITES • L ubrification of ethylene (hyper-)compressors cylinders
• Excellent lubricity.
DS 270 for the production of low density polyethylene.
ORITES
Synthetic PAG • Resistant to corrosion. 270 NSF H1
DS 270 X
• L ubrification of ethylene (hyper-)compressors cylinders
• ISO 6743-3: DGC • EU 2011/10/EC
for the production of low density polyethylene and EVA.
ORITES • Burckhardt Compression
• Avoids pre-polymerization issues.
DS 270 D
ORITES • Lubrification of ethylene (hyper-)compressors cylinders ORITES TW 220 is ISO 21469 certified
• E xcellent lubricity.
TW 220 for the production of low density polyethylene.
General Lubrication
PNEUMATIC SYSTEMS
PNEUMA oils guarantee the performance of pneumatic equipment and enable • Excellent resistance to shocks due to the extreme-pressure additives and good
reduced fluid consumption. anti-wear protection.
• Adhesiveness and tacky character, preventing pollution by oil mist. • Water-repellent and antirust properties.
PNEUMA
PRODUCT NATURE APPLICATIONS SPECIFIC ADVANTAGES VISCOSITY* SPECIFICATIONS
• P neumatic tools: pneumatic shock engines, line lubricators
PNEUMA Mineral • Possible use in confined atmosphere: galleries, tunnels. 46 to 320 ISO 6743-11 P
or pulverisers for hammer drills.
PNEUMA • Anti-icing.
Synthetic • Soundproof pneumatic shock equipment. 17
SY • Use at very low temperature.
BIODEGRADABLE H1 suitable for incidental food contact 3H suitable for direct food contact General Lubrication 21
FINAVESTAN
15
A 80 B
FINAVESTAN
23
A 100 B The use of these oils depends
• Designed for the following industries:
• Very high purity. on the national legislation in force
FINAVESTAN - plastics: plasticizer for PS and other polymers,
Medicinal white oil • Odourless, flavourless, colourless. 29 • European Pharmacopoeia
A 180 B for all packaging intended for food contact,
• Does not contain sulphur or aromatic hydrocarbon. • US Pharmacopeia USA FDA: 21 CFR 178.3620
- pharmaceutical: excipient.
FINAVESTAN • (a), white mineral oil • NSF H1
40
A 210 B
FINAVESTAN
70
A 360 B
FINAVESTAN
100
A 520 B
EMETAN
Medicinal vaseline The use of these vaselines depends
M
• Designed chiefly for the Cosmetics and Pharmaceutical • Very high purity. on the national legislation in force
Industries as a lubricant or raw material. • Odourless, flavourless. • EMETAN M only: European, French,
EMETAN
Vaseline German and US Pharmacopoeia
T
BIODEGRADABLE H1 suitable for incidental food contact 3H suitable for direct food contact General Lubrication 22
BIODEGRADABLE H1 suitable for incidental food contact 3H suitable for direct food contact General Lubrication 23
ISOVOLTINE
PRODUCT NATURE APPLICATIONS SPECIFIC ADVANTAGES VISCOSITY* SPECIFICATIONS
• High insulating power.
ISOVOLTINE Naphthenic mineral • F or transformers, circuit breakers, contactors and all high-
• Very high resistance to oxidation enabling a considerable service life. 10 IEC 60296:2012 – Uninhibited
II (uninhibited) voltage equipment.
• Excellent cooling properties.
• High insulating power.
ISOVOLTINE Naphthenic mineral • F or transformers, circuit breakers, contactors and all high- IEC 60296:2012 – Trace Inhibited
• Contains traces of inhibitor to improve oxidation resistance. 8,2
II-T (trace inhibited) voltage equipments. • ASTM D 3487 Type I
• Good cooling properties.
•H
igh insulating power.
ISOVOLTINE Naphthenic mineral • F or transformers, circuit breakers, contactors and all high-
•C
ontains inhibitor to ensure a better resistance to oxidation. 10 IEC 60296:2012 – Inhibited
II X (inhibited) voltage equipment.
•G
ood cooling properties.
•H
igh insulating power.
ISOVOLTINE Naphthenic mineral • For transformers, circuit breakers, contactors and all high- IEC 60296:2012 – Inhibited
•C
ontains inhibitor to ensure a better resistance to oxidation. 8,4
II-TX (inhibited) voltage equipment. • ASTM D 3487: Type II
•G
ood cooling properties.
•D oes not contain sulfur
ISOVOLTINE Paraffinic mineral • For transformers, circuit breakers, contactors and all high- IEC 60296: 2012 – Trace Inhibited
•G ood oxidation resistance. 7,7
P1 (trace inhibited) voltage equipment. • ASTM D 3487 Type I fluid
• E xcellent stray gassing performance.
• Does not contain sulfur
ISOVOLTINE Paraffinic mineral • F or transformers, circuit breakers, contactors and all high- IEC 60296:2012 – Inhibited
• Superior oxidation resistance. 7,7
P2 (inhibited) voltage equipment. • ASTM D 3487 Type II fluid
• Excellent stray gassing performance.
• Transformers. • Biodegradable.
ISOVOLTINE IEC 61099 • IEC 61039 - K3 Class
Synthetic ester •H ighly recommended to reduce fire hazards (mining, on-board • E xcellent resistance to fire. 26
BIO • OECD 301B • NWG
transformers). •N o danger for the aquatic environment.
• Transformers. •R
eadily biodegradable
ISOVOLTINE IEC 62770 • IEC 61039 - K2 Class
Vegetable oil • Highly recommended to reduce fire hazards (mining, on-board •O
ptimum fire resistance 39
BIO VE • OECD 301B
transformers). •H
igher Water absorption extending insulating paper lifetime.
BIODEGRADABLE H1 suitable for incidental food contact 3H suitable for direct food contact General Lubrication 24
PRESLIA
PRODUCT NATURE APPLICATIONS SPECIFIC ADVANTAGES VISCOSITY* SPECIFICATIONS
ISO 6743-5 THA/THE/TSA/TSE/TGA/TGB/TGE/ TGSB
ISO 8068 (ISO VG 32 & 46) - DIN 51515 (ISO VG 32
& 46) - ASTM D 4304 typeI & II - JIS K-2213 type
2 w/add – GB 11120-89 L-TSA Alstom HTGD 90117
• Hydraulic turbines.
ALSTOM HYDRO HTWT 600050
• Steam turbines. • Very good defoaming, air release and demulse properties.
PRESLIA Mineral 32 to 100 • General Electric GEK 28143B, GEK 32568G, GEK
• Gas turbines. • High level of protection against oxidation.
27070, GEK 46506E
• Centrifugal compressor.
• MAN Diesel &Turbo SPD10000494596
• MAN Turbo SPD 10000242284
• Siemens TLV 901304, TLV 901305
• Solar ES 9-224 W Class II
ISO 6743-5 TSA/TSE/TGA/TGB/TGE/TGSB/TGSE
ISO 8068 - DIN 51515 - ASTM D 4304 type I & II - JIS
K-2213 type 2 w/add – GB 11120-89 L-TSA Alstom
• Steam turbines. • Very high resistance to oxidation. Reinforced anti-wear HTGD 90117
PRESLIA 32
Hydrocracked mineral • Gas turbines. and extreme-pressure additivation. • General Electric GEK 28143B, GEK 32568G, GEK
GT 46
• Combined-cycle turbines. • Longer oil drain intervals. 107395A, GEK 101941A, GEK 27070,
GEK 46506 E • MAN Turbo SPD 10000494596
• Siemens TLV 901304, TLV 901305
• Škoda turbíny Plzen • Solar ES 9-224 W Class II
MIL-PRF-23699F
PRESLIA
Synthetic ester • Aero-derivative gas turbines. • E xcellent resistance at high temperatures. 25 • Allison Rolls Royce (USA) • General Electric
SE JET
• Rolls Royce (UK) • Turbomeca
SAE AS5780 Class HPC
PRESLIA
Synthetic ester • Aero-derivative gas turbines. • Enhanced thermal stability. 25 • MIL-PRF-23699 F Class HTS
SE HTS
• NATO CODE O-154
• Hydraulic power generation plant (turbines and hydraulic • Resistance to oxidation.
BIOPRESLIA systems). • Very good defoaming, air release and demulse properties.
Saturated synthetic esters 22 to 100
HT • Good compatibility with elastomers.
• Biodegradable. www.total.com/en/total-ecosolutions
BIODEGRADABLE H1 suitable for incidental food contact 3H suitable for direct food contact General Lubrication 25
BIODEGRADABLE H1 suitable for incidental food contact 3H suitable for direct food contact Greases 26
MULTIS / LICAL
OPERATING SPECIFICATIONS
NLGI BO
PRODUCT APPLICATIONS SPECIFIC ADVANTAGES THICKENER TEMPERATURE
GRADE VISCOSITY* ISO 6743-9 DIN 51502
RANGE
MULTIS
Lithium / Calcium 2 120 -25 °C to +120 °C L-XBCEA 2 K2K-25
2
• Multipurpose grease for automotive and industrial applications. •C
ompatible with most conventional soaps.
MULTIS
Lithium / Calcium 3 120 -20 °C to +120 °C L-XBCEA 3 K3K-20
3
MULTIS
Lithium / Calcium 000 150 -30 °C to +100 °C L-XCBEB 000 GP000G-30
EP 000
• Good pumpability.
MULTIS
• Grease for centralized lubrication system and enclosed gears. • Long service life thanks to the good resistance Lithium / Calcium 00 150 -30 °C to +100 °C L-XCBEB 00 GP00G-30
EP 00
of the lubricating film.
MULTIS
Lithium / Calcium 0 150 -30 °C to +120 °C L-XCCEB 0 MP0K-30
EP 0
MULTIS
Lithium / Calcium 1 150 -30 °C to +120 °C L-XBCEB 1 KP1K-30
EP 1
MULTIS • Extreme Pressure, multipurpose grease for a wide range
• Enables to rationalize stocks and simplify maintenance operations. Lithium / Calcium 2 150 -25 °C to +120 °C L-XBCEB 2 KP2K-25
EP 2 of industrial and automotive applications.
MULTIS
Lithium / Calcium 3 150 -20 °C to +120 °C L-XBCEB 3 KP3K-20
EP 3
• Good resistance to water.
LICAL • Extreme Pressure, multipurpose grease recommended for most
• Enables stock rationalization. Lithium / Calcium 2 190 -25 °C to +130 °C L-XBDHB 2 KP2K-25
EP 2 type of industrial applications including heavy-duty applications.
• Simplifies maintenance operations.
MULTIS • Extreme Pressure, multipurpose grease for applications under •C ontains 1% of MoS2.
Lithium / Calcium 2 150 -25 °C to +130 °C L-XBCEB 2 MPF2K-25
MS 2 load, shocks and vibration. • Avoid any jamming or sticking.
• Contains 3% MoS2.
LICAL • Extreme Pressure, multipurpose grease recommended for heavy-
• Very good resistance to high loads and shocks. Lithium / Calcium 2 210 -20 °C to +120 °C L-XBCHB 2 KPF2K-20
MS 2 duty applications in severe environment (water, dust).
• Very good adhesiveness on metal surfaces.
BIODEGRADABLE H1 suitable for incidental food contact 3H suitable for direct food contact Greases 27
BIODEGRADABLE H1 suitable for incidental food contact 3H suitable for direct food contact Greases 28
MULTIS COMPLEX
OPERATING SPECIFICATIONS
NLGI BO
PRODUCT APPLICATIONS SPECIFIC ADVANTAGES THICKENER TEMPERATURE
GRADE VISCOSITY* ISO 6743-9 DIN 51502
RANGE
MULTIS COMPLEX
Lithium Complex 2 165 -20 °C to +160 °C L-XBEHB 2 KP2P-20
EP 2 • E xtreme Pressure, multipurpose grease suitable for wheel
bearings, ball bearings, roller bearings, plain bearings, seal.
MULTIS COMPLEX • Excellent mechanical and thermal stabilities. Lithium Complex 3 165 -20 °C to +160 °C L-XBDHB 3 KP3N-20
EP 3 • Minimised downtime and maintenance cost.
• Extreme Pressure, multipurpose grease for loaded applications.
MULTIS COMPLEX
• For wheel bearings, ball bearings, roller bearings, plain bearings, Lithium Complex 2 340 -30 °C to +160 °C L-XBEHB 2 KP2P-30
HV 2
seals...
• Contains 3% MoS2.
MULTIS COMPLEX • E xtreme Pressure grease for extremely by highly loaded
• Good resistance to water. Lithium Complex 2 340 -30 °C to +160 °C L-XCEHB 2 KPF2P-30
HV 2 MOLY applications and high temperatures.
• Reduces wear, rust and corrosion.
• Contains 3% MoS2.
MULTIS COMPLEX • Extreme Pressure grease suitable for slow-moving heavily loaded • Reduces wear, rust and corrosion.
Lithium Complex 2 800 -20 °C to +160 °C L-XDEHB 2 KPF2P-20
XHV2 MOLY bearings and sliding mechanisms especially in Mining Industry. • Excellent water resistance.
• Excellent resistance to shocks and vibration.
• Reduced gear wear due to excellent EP properties.
MULTIS COMPLEX • High performance, Extreme Pressure synthetic semi-fluid grease
• Long service life even at high operating temperatures. Lithium Complex 00 460 -50 °C to +160 °C L-XEEHB 00 KP00P-50
SHD 00 for gearbox applications.
• Reduced power consumption due to low running torque.
MULTIS COMPLEX • High performance, Extreme Pressure synthetic grease for bearings
• Oustanding low and high temperature performances. Lithium Complex 2 32 -50 °C to +160 °C L-XEEHB 2 KP2P-50
SHD 32 operating over a wide range of temperatures.
• Improved mechanical efficiency.
MULTIS COMPLEX • Extreme Pressure synthetic grease particularly suited for high • Long service life. Lithium Complex 2 100 -50 °C to +160 °C L-XEEHB 2 KP2P-50
SHD 100 speed bearings application such as electric motors.
MULTIS COMPLEX • Extreme Pressure, multipurpose grease synthetic grease for heavy
Lithium Complex 2 220 -40 °C to +160 °C L-XEEHB 2 KP2P-40
SHD 220 duty automotive and industrial applications. • Oustanding low and high temperature performances.
• High performance synthetic grease allowing oustanding protection • Improved mechanical efficiency.
MULTIS COMPLEX • Long service life.
of slow speed, heavily loaded bearings over a wide temperature Lithium Complex 1.5 460 -40 °C to +160 °C L-XEEHB 1/2 KP1/2P-40
SHD 460
range recommended in Paper Industry.
BIODEGRADABLE H1 suitable for incidental food contact 3H suitable for direct food contact Greases 29
COPAL
OPERATING SPECIFICATIONS
NLGI BO
PRODUCT APPLICATIONS SPECIFIC ADVANTAGES THICKENER TEMPERATURE
GRADE VISCOSITY* ISO 6743-9 DIN 51502
RANGE
• Extreme Pressure, multipurpose and adhesive grease,
COPAL
for high temperatures. • Good adhesiveness on metal surfaces. Aluminium Complex 00 165 -20 °C to +150 °C L-XBDEB 00 KP00N-20
EP 00
• Suitable for shock loaded applications, travelling cranes, presses.
• Extreme Pressure, multipurpose and adhesive grease,
COPAL for high temperatures.
• Good adhesiveness on metal surfaces. Aluminium Complex 2 165 -20 °C to +150 °C L-XBDHB 2 KP2N-20
EP 2 • Suitable for shock loaded bearings, heavily loaded transmission,
assemblies, travelling cranes, presses.
• Extreme Pressure, multipurpose and adhesive grease for shock •C ontains 2.5 % MoS2.
COPAL
loaded applications with vibrations, over a wide range of temperatures. • Good adhesiveness on metal surfaces. Aluminium Complex 2 165 -20 °C to +150 °C L-XBDEB 2 KPF2N-20
MS 2
• Suitable for boundary lubrication. • Good resistance to water.
• Extreme Pressure, multipurpose and adhesive grease for heavy
• Contains 10% Graphite.
COPAL loads and high temperatures.
• Good adhesiveness on metal surfaces. Aluminium Complex 0 750 -20 °C to +150 °C L-XBDHB 0 OGPF0N-20
GEP 0 • Recommended for the lubrication of open gears, especially during
• Extended gear life potential.
the running-in period.
• Highly adhesive Extreme Pressure grease, for heavy loads
COPAL and high temperatures.
• Contains 8% Graphite and 1% MoS2. Aluminium Complex 0-00 > 1000 -20 °C to +150 °C L-XBDHB 0/00 OGPF0/00N-20
OGL 0 • Application in cement plants: open gears of kilns and mill drives.
• Application in sugar mills: open gears in sugar cane mills. • Dual solid additivation reduces wear particularly near the tooth
crest and toooth base, decreasing energy consumption.
• Highly adhesive Extreme Pressure grease, for heavy loads • Very good water resistance.
COPAL and high temperatures.
Aluminium Complex 2 > 1000 -15 °C to +150 °C L-XBDHB 2 OGPF2N-15
OGL 2 • Specially developed for lubrication of open gears when a NLGI 2
grade is required.
COPAL • Extreme Pressure, adhesive grease for joins, open gears • Contains 10% Graphite.
Aluminium Complex 1 -30 °C to +120 °C Aerosol
SPRAY and cables lubrication. • Enables local application of all surfaces.
BIODEGRADABLE H1 suitable for incidental food contact 3H suitable for direct food contact Greases 30
TOTAL NEVASTANE
OPERATING SPECIFICATIONS
NLGI BO
PRODUCT APPLICATIONS SPECIFIC ADVANTAGES THICKENER TEMPERATURE
GRADE VISCOSITY* REGISTRATION ISO 6743-9 DIN 51502
RANGE
TOTAL NEVASTANE
00 L-XBDFA00 K00N-20
XMF 00
TOTAL NEVASTANE • E xtreme Pressure, multipurpose and adhesive grease.
0 NSF H1 L-XBDFA0 K0N-20
XMF 0 • S uitable for high to medium speed bearings in Food Processing
•G ood adhesiveness on metallic surfaces. Aluminium ISO 21469
Industry. 120 -20 °C to +150 °C
TOTAL NEVASTANE • P rovides excellent corrosion protection and water resistance. Complex KOSHER
•R oller and plain bearings. 1 L-FXBDFB1 KP1N-20
XMF 1 HALAL
•C rimping machines.
TOTAL NEVASTANE
2 L-XBDFB2 KP2N-20
XMF 2
• Extreme Pressure, multipurpose and very adhesive grease.
NSF H1
• Suitable for Food Processing application when high adhesiveness
TOTAL NEVASTANE • Excellent adhesiveness. Aluminium ISO 21469
is required. 2 150 -20 °C to +150 °C
2 PLUS • Provide excellent corrosion protection and water resistance. Complex KOSHER
• Roller and plain bearings - high and medium speed.
HALAL
• Crimping machines
• Contains PTFE additives.
NSF H1
• Extreme Pressure, multipurpose tacky grease for food processing • Exceptional adhesiveness on metal surfaces.
TOTAL NEVASTANE Aluminium ISO 21469
in presence of water. • Excellence resistance to water washout. Excellent antiwear 2 150 -20 °C to +150 °C L-XBDFB2 KP2N-20
HD2T Complex KOSHER
• Suitable for loaded bearings, bottling and crimping machines. protection.
HALAL
• Low friction coefficient.
BIODEGRADABLE H1 suitable for incidental food contact 3H suitable for direct food contact Greases 31
ALTIS
OPERATING SPECIFICATIONS
NLGI BO
PRODUCT APPLICATIONS SPECIFIC ADVANTAGES THICKENER TEMPERATURE
GRADE VISCOSITY* ISO 6743-9 DIN 51502
RANGE
• Reduced vibration.
ALTIS • High performance grease suited for high speed bearings and high
• Reduced energy consumption. Polyurea 2 110 -20 °C to +180 °C L-XBFHA 2 KP2R-20
EM 2 temperature applications such as electric motors.
• Extended relubrication intervals.
• High performance grease suited for high speed and medium •R educed vibration.
ALTIS loaded application. •R educed energy consumption.
Polyurea 2 160 -20 °C à +160 °C L-XBEEB 2 KP2P-20
MV 2 • Typically used in fan bearings, roller bearings and direction • E xtended relubrication intervals.
systems in the dry parts of paper mills. • S uitable for start and go applications.
•R educed vibration.
• Very high performance synthetic grease suited for high speed
ALTIS •R educed energy consumption.
bearings such as electric motors, over a wide range of temperatures. Polyurea 2 80 -40 °C to + 180 °C L-XDFEB 2 KP2R-40
SH 2 • E xtended relubrication intervals.
• Formulated for First Fill applications and long service life.
• E xtreme temperature operations even at high speed.
• Extreme Pressure grease for moderate loads and high temperature
ALTIS •R
educed vibration.
applications. Polyurea 1 500 -20 °C to + 180 °C L-XBFEB2 KP2R-20
HV 1 •H
igh temperature performance.
• Suitable for the segment zero of continous casting and pellet press.
BIODEGRADABLE H1 suitable for incidental food contact 3H suitable for direct food contact Greases 32
BIODEGRADABLE H1 suitable for incidental food contact 3H suitable for direct food contact Greases 33
CERAN • Very high performance, Extreme Pressure, synthetic grease Calcium Sulfonate
1.5 80 -55 °C to +180 °C L-XEFFB 1/2 KP1/2R-55
XS 80 designed for high speed applications over a wide range of temperature. • Very low temperature. Complex
• E xcellent water resistance.
• Very high performance, Extreme Pressure, synthetic grease • L ong service life.
CERAN Calcium Sulfonate
designed for loaded applications over a wide range of temperature • R educed energy consumption. 1.5 320 -40 °C to +180 °C L-XDFFB 1/2 KP1/2R-40
XS 320 Complex
under severe conditions.
• Very high performance, Extreme Pressure, synthetic grease •C ontains 5% MoS2.
CERAN designed for heavy-duty equipment in arctic conditions. • Outstanding resistance to loads and shocks. Calcium Sulfonate
1.5 40 -60 °C to +180 °C L-XEFFB 1/2 KP1/2R-60
XS 40 MOLY • Recommended for automotive and industrial applications • Excellent water resistance. Complex
in Mining Industry. • Suitable for very low temperatures.
SPECIALITIES CERAN
OPERATING SPECIFICATIONS
NLGI BO
PRODUCT APPLICATIONS SPECIFIC ADVANTAGES THICKENER TEMPERATURE
GRADE VISCOSITY* ISO 6743-9 DIN 51502
RANGE
CERAN • Semi-fluid and Extreme Pressure adhesive grease for metal Calcium Sulfonate
0 325 -25 °C to +150 °C L-XBDIB 0 OGPON-25
CA cables, rails, winches and chains. Complex
• Highly adhesive, Extreme Pressure grease adapted to severe conditions. •O utstanding resistance to water.
CERAN •R ecommended for metal cables. • E xtended life of parts subjected to heavy loads. Calcium Sulfonate
0.5 > 1700 -20 °C to +150 °C L-XBDIB 0 OGPON-20
AD PLUS • S uitable for applications in cement plants, mines, quarries, Complex
offshore, marine.
• Highly adhesive, Extreme Pressure grease adapted to the presence
• E xcellent water resistance with no consistency lost.
CERAN of water, high temperatures and heavy loads. Calcium Sulfonate
• V ery adhesive on metal surfaces. 2 180 -25 °C to + 180 °C L-XBFIB 2 KP2R-25
ST 2 • Suitable for multi-purpose applications in industry (coiler, rolling mill) Complex
• E xtended relubrication intervals.
and offshore environment (cables, gears, screen eccentric bearing).
• Adhesive and Extreme Pressure semi-fluid grease, adapted
• Contains 6.5% Graphite and 1% MoS2.
CERAN to high temperatures and heavy loaded applications. Calcium Sulfonate
• Good adhesiveness. 0 695 -25 °C to + 180 °C L-XBFHB 0 OGPF0R-25
GEP • Recommended for gears, transmissions and open gears of sugar Complex
• Extended service life.
cane mills.
• Extreme Pressure, multipurpose grease adapated to very loaded • Contains 2% MoS2.
CERAN Calcium Sulfonate
industrial application at high temperature. • Extended service life. 1.5 650 -20 °C to + 180 °C L-XBFHB 1/2 KPF1/2R-20
MS Complex
• Recommended for shock loading applications with vibration. • Very good adhesiveness.
BIODEGRADABLE H1 suitable for incidental food contact 3H suitable for direct food contact Greases 34
BIODEGRADABLE H1 suitable for incidental food contact 3H suitable for direct food contact Greases 35
BIODEGRADABLE H1 suitable for incidental food contact 3H suitable for direct food contact Greases 36
CALORIS
• Grease adapted to high temperatures and low speeds. •R
esistant to acid and alkaline atmospheres. Clay 2.5 500 -15 °C to +160 °C L-XAEEA 2/3 M2/3P-15
23
CALORIS • Grease adapted to high temperatures, low speeds, heavy loads • Contains 1% MoS2.
Clay 2.5 500 -15 °C to +160 °C L-XAEEA 2/3 MF2/3P-15
MS 23 and a risk of shocks. • Resistance to acid and alkaline atmosphere.
• Contains PAG base oil.
MARSON • Synthetic grease adapted to heavy loads.
• Low friction coefficient. Lithium 00 145 -35 °C to +130 °C L-XCCEB 00 GPGP00K-35
SY 00 • For worm gear pairs, casing gears or fitted devices.
• Long life service.
• Synthetic grease adapted to heavy loads.
MARSON • Contains PAG base oils.
• Recommended for applications in contact with petroleum liquids Lithium 2 145 -40 °C to +120 °C L-XDCEA 2 MPPG2K-40
SY 2 • Resistance hydrocarbon wash out.
dispensers.
•C ontains Copper additive.
SPECIS • Anti-seizing grease for threaded assembly under severe corrosion • S eizing prevention.
Clay 1 500 -20 °C to + 300 °C L-XBGBB 1 MPF1U-20
CU conditions, water vapour, gasses. • Easy
dismounting of components in a moist atmosphere
or wet environment.
• Extended life of the equipment.
AXA • Packer grease for autoclaves, reactors under pressure
• Contribution to the air tightness of the equipment. Calcium 3 69 0 °C to +100 °C L-XABGA 3 K3G 0
GA 3 or in a vacuum, in the chemicals and other industries.
• NSF H1.
STATERMIC • Special fluorine compounds-based grease for very high • Reduced friction coefficient of most plastics and metals.
Fluorine 2 150 -25 °C to + 250 °C L-XBGDB 2 KFKP2U-25
XHT temperatures and medium-to-heavy loads. • Extended life of the lubricated parts.
• Special fluorine compounds-based grease for high temperatures, • Protection of lubricated parts even in the presence of acids,
STATERMIC
resistant to powerful acids, halogenated compounds, alcohols, halogenated alcohols, oxidants or in the presence of radiation. Fluorine 2 375 -25 °C to + 250 °C L-XBGDB 2 KFKP2U-25
NR
oxidants and radiations. • NSF H1.
AUTOMATIC LUBRICATORS
OPERATING SPECIFICATIONS
NLGI BO
PRODUCT APPLICATIONS SPECIFIC ADVANTAGES THICKENER TEMPERATURE
GRADE VISCOSITY* ISO 6743-9 DIN 51502
RANGE
TOTAL AUTOMATIC • Remote up to 2 meters from the lubrication point.
• E lectro-mechanical automatic lubricator, single point, refillable. To be used with TOTAL AUTOMATIC GREASE SYSTEM 240 cc refills: CERAN XM 220,
GREASE SYSTEM • Set up for a lubrication program of 1, 3, 6 or 12 months.
• 1 0 bar ejection pressure. CERAN FG, NEVASTANE XS 80 and ALTIS SH2.
Starterpack • ATEX certification.
• Very high performance synthetic grease suited for high speed
TOTAL AUTOMATIC
bearings such as electric motors, over a wide range of temperatures.
GREASE SYSTEM Polyurea 2 80 -40 °C to +180 °C L-XDFEB 2 KP2R-40
• Specially developed for the lubrication of fans and electric engines
REFILL ALTIS SH 2
with TOTAL AUTOMATIC GREASE SYSTEM.
TOTAL AUTOMATIC • E xtreme Pressure, high performance, multipurpose grease.
Calcium Sulfonate
GREASE SYSTEM • S uitable for the lubrication of conveyers, rails, chains with TOTAL • Automatic Lubrication with predetermined interval and volume. 1.5 220 -30 °C to +180 °C LXCFIB1/2 KP1/2R-30
Complex
REFILL CERAN XM 220 AUTOMATIC GREASE SYSTEM.
TOTAL AUTOMATIC • Extreme Pressure, very high performance, synthetic grease designed
GREASE SYSTEM for high speed applications over a wide range of temperature. Calcium Sulfonate
1.5 80 -55 °C to +180 °C L-XEFFB1/2 KP1/2R-55
REFILL TOTAL • Recommended for the Food Industry and/or very low temperatures, Complex
NEVASTANE XS 80 with TOTAL AUTOMATIC GREASE SYSTEM.
* Typical kinematic viscosity of base oil at 40 °C in mm2/s
BIODEGRADABLE H1 suitable for incidental food contact 3H suitable for direct food contact Greases 37
ROLLING RUST
48 49
OILS PREVENTIVE
SLIDES GUIDES
50
& WAYS
BIODEGRADABLE H1 suitable for incidental food contact 3H suitable for direct food contact Metalworking 38
BIODEGRADABLE H1 suitable for incidental food contact 3H suitable for direct food contact Metalworking 39
BIODEGRADABLE H1 suitable for incidental food contact 3H suitable for direct food contact Metalworking 40
Metalworking
CUTTING MACHINING GRINDING / SOLUBLE CUTTING FLUIDS
• Reinforced antiwear properties
TOTAL offers a wide range of soluble fluids: macro-emulsions with LACTUCA, • Extended anticorrosion properties
micro-emulsions with SPIRIT and synthetic fluids with VULSOL. • Outstanding resistance to microorganism development
Their formulation guarantees machining performance for any type of metals • Improved antifoaming properties
and severity of operations:
MACRO-EMULSIONS LACTUCA
PRODUCT METALS APPLICATIONS SPECIFIC ADVANTAGES HSE SPECIFICATIONS
LACTUCA • Economic formula.
Ferrous and non-ferrous • General machining. ISO-L-MAA
LT 3000 • Does not stain yellow metals.
BIODEGRADABLE H1 suitable for incidental food contact 3H suitable for direct food contact Metalworking 41
BIODEGRADABLE H1 suitable for incidental food contact 3H suitable for direct food contact Metalworking 42
BIODEGRADABLE H1 suitable for incidental food contact 3H suitable for direct food contact Metalworking 43
BIODEGRADABLE H1 suitable for incidental food contact 3H suitable for direct food contact Metalworking 44
NEAT METAL FORMING OILS - FOR AVERAGE AND DIFFICULT OPERATIONS, CHLORINE FREE MARTOL
PRODUCT METALS APPLICATIONS SPECIFIC ADVANTAGES HSE VISCOSITY* SPECIFICATIONS
20
MARTOL • Optimised for aluminium.
AL
Non-ferrous • Deep drawing, wire drawing and tube drawing.
• Up to -30% of degreasing time.
Chlorine free 60 ISO-L-MHF
150
NEAT METAL FORMING OILS - FOR THE MOST DIFFICULT OPERATIONS, CHLORINE FREE MARTOL
PRODUCT METALS APPLICATIONS SPECIFIC ADVANTAGES HSE VISCOSITY* SPECIFICATIONS
5
• Very good extreme pressure properties for the most difficult
65
MARTOL • For all stringent forming operations: deep drawing, operations.
All ferrous and aluminium Chlorine free 100 ISO-L-MHF
EP CF bar drawing, cold heading... • Large range of viscosities to cover all kinds of forming
235
geometries and all the metal thicknesses.
405
NEAT METAL FORMING OILS - FOR THE MOST DIFFICULT OPERATIONS, CHLORINATED FORMULAS MARTOL
PRODUCT METALS APPLICATIONS SPECIFIC ADVANTAGES HSE VISCOSITY* SPECIFICATIONS
• Long chain chlorinated paraffins non carcinogenic following
MARTOL • For all stringent forming operations on hard steels 79
Steel and stainless steels the EU directive 67/548, contrary to other products available Chlorinated ISO-L-MHF
EP and stainless steels. 180
on the market.
NEAT METAL FORMING OILS - SYNTHETIC PRODUCTS - WITHOUT MINERAL OIL MARTOL
PRODUCT METALS APPLICATIONS SPECIFIC ADVANTAGES HSE VISCOSITY* SPECIFICATIONS
• Increase of tool life.
MARTOL • Excellent thread shaping quality. Without 68
Steel, titanium, stainless steel, inconel • Fabricating screws by deformation: thread rolling.
SPIROLL SE • Contains no graphite so helps keep the working environment mineral oil. 100
clean.
BIODEGRADABLE H1 suitable for incidental food contact 3H suitable for direct food contact Metalworking 45
MARTOL • Cutting steel and aluminium strips. More severe die stamping. •C olourless and odourless.
Ferrous and non-ferrous Chlorine free 2.05 at 20 °C ISO-L-MHC
EV 40 CF • For thicknesses < 1 mm. • F ormula doped for more severe die-stamping.
BIODEGRADABLE H1 suitable for incidental food contact 3H suitable for direct food contact Metalworking 46
FINAROL
PRODUCT NATURE OF THE FILM APPLICATIONS SPECIFIC ADVANTAGES VISCOSITY* SPECIFICATIONS
FINAROL • P rotection and mid to severe deformation of electrozinc-coated • Multipurpose product, developed for the Car Industry
Mineral concentrate soluble in water 9.75 ISO-L-RC
B 5746 sheet steel. and steelmaking.
Metalworking
QUENCHING OILS
DRASTA quench oils match all thermal treatment requirements and all types of installation.
Formulated from base oils selected for their exceptional resistance to oxidation, they
offer a cost effective means of enhancing the mechanical properties of components.
DRASTA
Semi-rapid cold quenching • Hardening of medium-to-good quenchabilty steels. • Hydrocracked base oils with high resistance to oxidation 86 °C/s at 574 °C 22 ISO-L-UHA
C 5022
and high flash point.
•N o H304 labelling.
DRASTA • Hardening of low quenchability steels with a high Martensite
Rapid cold quenching • L ess carbonaceous matter and residues. 102 °C/s at 653 °C 25 ISO-L-UHA
C 7025 start (Ms).
BIODEGRADABLE H1 suitable for incidental food contact 3H suitable for direct food contact Metalworking 47
LUBRILAM
• Rolling oil for foil operations operations. • L oad carrying capacity. 2.7 at 40 °C
S 23 L
LUBRILAM • L ow evaporation losses. 2.85 at 20 °C
• Narrow cut rolling oil for foil operations.
S 31 L • E nergy savings during annealing operation. 1.95 at 40 °C
Meets the requirements
Aluminium
LUBRILAM • L oad carrying capacity, low odour. 3.6 at 20 °C of the FDA CFR 178.3910
• Rolling oil for sheet operations.
S 40 L •H igh thermal and UV stability. 2.4 at 40 °C
• L oad carrying capacity, low odour.
LUBRILAM 7 at 20 °C
• Rolling oil for sheet operations. •H igh thermal and UV stability.
S 55 L 4.1 at 40 °C
• E xtends the life of the rolling oil.
LUBRILAM • L oad carrying capacity, low odour. 11.0 at 20 °C
• Rolling oil for preliminary work operations.
S 60 L •H igh thermal and UV stability. 6.0 at 40 °C
LUBRILAM • Concentrate of ester-type performance additives • S olubilisation capacity. Meets the requirements of the
Aluminium 2.3 at 40 °C
C6 to increase the smoothness of the rolling base. • E ase of application. INS H1 FDA CFR 178.3910 FDA 21 CFR 178.3570
AIRPURE systems
•R esistance to oxidation.
LUBRILAM CLEANER Meets the requirements
Aluminium • Air purification oil. • S olvent recovery power. 29,8 at 40 °C
H1 of the FDA CFR 178.3570
• S uitable for incidental food contact requirements.
NSF H1 registered
BIODEGRADABLE H1 suitable for incidental food contact 3H suitable for direct food contact Metalworking 48
OSYRIS
Waxy 6 to 8 months •H
igh flash point to limit the risks of fire. ISO-L-REE
DWY 4000
OSYRIS
Waxy 8 to 12 months •H
igh flash point to limit the risks of fire. ISO-L-REE
DWY 6000
OSYRIS
Varnish > 18 months • High performance product. ISO-L-RF
X 9100
OSYRIS
Oily after evaporation of the solvent 6 to 8 months • Absence of any odour of solvent. ISO-L-REE
DWL 3550
BIODEGRADABLE H1 suitable for incidental food contact 3H suitable for direct food contact Metalworking 49
BIODEGRADABLE H1 suitable for incidental food contact 3H suitable for direct food contact Metalworking 50
Aviation 51
10
AERO
60 SAE J 1899 • AIR 3560 • FAA AD 80-04-03
120
AERO
40
D 80
AERO • Ashless dispersive monograde mineral oils for the lubrication of piston engines operating under severe
50 SAE J 1899 • AIR 3570
D 100 and very severe conditions.
AERO
60
D 120
AERO
40
XPD 80
SAE J 1899 • FAA AD 80-04-03 • Lycoming SI 1014M, SI 1409C,
•N ew generation ashless dispersive monograde mineral lubricants, specially developed to improve SB 446E, SB 471B • Continental motors SIL 16-2, M-0
AERO
anti-wear and corrosion protection of your highly valued piston aviation engine. 50
XPD 100
• These oils already contain an anti-wear additive similar to TEXTRON Lycoming LW 16702.
AERO SAE J 1899 • FAA AD 80-04-03 • Lycoming SI 1014M, SI 1409C,
60
XPD 120 SB 446E, SB 471B
BIODEGRADABLE H1 suitable for incidental food contact 3H suitable for direct food contact Aviation 52
10
This product list is non-exhaustive. Please contact us to learn about synthetic turbine engines lubricants, hydraulic fluids and greases.
BIODEGRADABLE H1 suitable for incidental food contact 3H suitable for direct food contact Aviation 53
10
WEAVING 57 FINISHING 58
54
BIODEGRADABLE H1 suitable for incidental food contact 3H suitable for direct food contact Textile 55
Textile
CARDING/COMBING
TEXINOL are antistatic, lubricating or hydrosoluble agents designed for the protection TEXINOL range has products adapted to all kinds of natural, synthetic and artificial
of fibers and machine metal parts in contact with them during carding and combing raw materials.
processes.
TEXINOL products will lower static electricity’s impact on fibers while reducing friction
and reinforcing the cohesion between them.
BIODEGRADABLE H1 suitable for incidental food contact 3H suitable for direct food contact Textile 56
ANTISTATIC LUBRICANTS FOR NON WOVENS IN NEEDLE PUNCHING AND TUFTING ELECTROFIX
PRODUCT APPLICATIONS SPECIFIC ADVANTAGES VISCOSITY (20°C) NATURE
ELECTROFIX • Antistatic lubricant designed for carding and needling of any kind of material.
• Good antistatic and lubrication performances. Synthetic
NT 4820 • Can be used alone or as an additive for lubricating preparations.
• Antistatic lubricant suitable for polypropylene fibers needling used for wall and floor-coverings
ELECTROFIX • Good antistatic and lubrication performances.
production (starting from 300g/m2). Synthetic
PPA 982 • Provides excellent cohesion to the fibers.
• Adapted to polyester fiber (PES) needling.
•N on greasy water soluble lubricant without mineral oil.
• Antistatic lubricant for web lapping and needling of polyester, polyamide, polypropylene and blends
ELECTROFIX •B iodegradable according to OECD 301-B (highest level > 60%).
with wool or jute. 140 – 180 cSt Synthetic
NT 75 • S uccessfully tested in M1 test for Fire propagation.
• Suitable for natural and synthetic fiber tearing.
• S uccesfully tested in DIN 75201 method A for fogging.
Textile
WEAVING
PARATEX range of lubricants offers solutions on both warp sizing and weft yarn breakage risks, yarn abrasion…) while guaranteeing high washability for all
yarn preparation. finishing processes, such as dyeing and coating, where auxiliaries’ removal is key
They have been developed to cope with weaving constraints (high speeds, to prevent quality problems on finished goods.
OVEROILING LUBRICANTS AND SIZING AGENTS FOR WEAVING, WARPING AND BEAMING PARATEX
PRODUCT APPLICATIONS SPECIFIC ADVANTAGES VISCOSITY (20°C) NATURE
• Water soluble product.
• Provides high inter filament cohesion.
• Cold sizing or warping lubricant for spun yarns (wool, cotton, flax and blends) but also for flat
PARATEX • Decreases spun yarn pilosity.
or textured (DTY, ATY) continuous filaments (dyed or raw white). 85 - 115 Synthetic
404 • Strongly improves gliding coefficient. Reduces static charges.
• Adapted to yarns containing elastane.
• Really easy to wash out. Cold application process.
• Biodegradable according to OECD 301-B (highest level > 60%).
PARATEX
• Over oiling product for warped yarns sized with synthetic sizing agents (vinylic, acrylic, soluble polyester). • Chemically inert towards most sizing agents. 36 - 41 Mineral
ENC 51 Z
• Warping lubricant for spun yarns (synthetic, cotton, wool, viscose, Kermel...) raw white or dyed
PARATEX • Improves gliding coefficient.
and their blends. 37 - 42 Mineral
5300 APZX • Good antistatic performances.
• Suitable for elastane.
BIODEGRADABLE H1 suitable for incidental food contact 3H suitable for direct food contact Textile 57
BIODEGRADABLE H1 suitable for incidental food contact 3H suitable for direct food contact Textile 58
DETERGENTS DETERFIX
PRODUCT APPLICATIONS SPECIFIC ADVANTAGES VISCOSITY (20°C) NATURE
• Detergent designed for woven or knitted fabrics deoiling. • ~100% active raw material.
DETERFIX • Strongly adapted to elastane deoiling with high content of textile lubricants (mineral oils or fatty • Approved by INVISTA® laboratory for its good compatibility level with Lycra® fiber and ability to spread
< 200 cSt Synthetic
HE 656 acid esters). silicones in washing bath.
• Suitable for continuous or discontinuous washing processes (JET, OVERFLOW, etc). • Adapted to automotive requirements.
• ~100% active raw material.
DETERFIX • Detergent designed to wash out oils (spinning, coning and knitting origin) from hosiery items.
• Approved by INVISTA® laboratory for its good compatibility level with Lycra® fiber and ability < 200 cSt Synthetic
CR 677 • Designed to clean elastomer content knitted fabrics, as hosiery, bodies, ribbon, etc.
to spread silicones in washing bath.
BIODEGRADABLE H1 suitable for incidental food contact 3H suitable for direct food contact Textile 59
61 OILS
62 GREASES
63 AEROSOLS
63 SPECIFIC PRODUCTS
BIODEGRADABLE H1 suitable for incidental food contact 3H suitable for direct food contact TOTAL NEVASTANE 60
BIODEGRADABLE H1 suitable for incidental food contact 3H suitable for direct food contact TOTAL NEVASTANE 61
BIODEGRADABLE H1 suitable for incidental food contact 3H suitable for direct food contact TOTAL NEVASTANE 62
TOTAL NEVASTANE •C
ooling circuits, including drinks, ice creams
MPG based antifreeze • Specific protection of alloys and metal equipment against corrosion. NSF H1
ANTIFREEZE and frozen food processing.
•C
losed circuits without air contact.
NSF H1
TOTAL NEVASTANE •N
umerous manufacturing processes in Agrifood
White Mineral • Process temperature < +310 °C (+330 °C in the film). 32 • ISO 21469 • ISO 6743-12 L -QC
HTF Industry: water baths, autoclaves, reactors,
KOSHER • HALAL
ovens, presses and moulds.
BIODEGRADABLE H1 suitable for incidental food contact 3H suitable for direct food contact TOTAL NEVASTANE 63
THERMOGRAPHIC INSPECTION
Minimizing failures and maximizing equipment availability are
major objectives for maintenance managers and their teams.
Services 65
AERO...................................................................................................................52 HYDRANSAFE.....................................................................................................20
AEROGEAR.........................................................................................................53 HYDROFLO.........................................................................................................19
AEROHYDRAULIC..............................................................................................53 ISOVOLTINE........................................................................................................24
AEROPROTECTIVE.............................................................................................53 JARYTHERM®....................................................................................................17
ALTIS...................................................................................................................32 KASSILLA............................................................................................................15
AXA......................................................................................................................37 LACTUCA............................................................................................................41
AZOLLA...............................................................................................................18 LICAL............................................................................................................. 27-28
BIO OG................................................................................................................36 LISSOLFIX...........................................................................................................55
BIOADHESIVE.....................................................................................................36 LUBRILAM...........................................................................................................48
BIOHYDRAN........................................................................................................19 LUNARIA.............................................................................................................11
BIOMERKAN…………….....................................................................................36 LYRAN.................................................................................................................22
BIOMULTIS..........................................................................................................28 MARSON.............................................................................................................37
BIOPRESLIA ………............................................................................................25 MARTOL........................................................................................................ 45-46
CALORIS.............................................................................................................37 MISOLA.................................................................................................................8
CARTER........................................................................................................ 15-16
MULTIS.......................................................................................................... 27-28
CERAN.......................................................................................................... 33-34
MULTIS COMPLEX..............................................................................................29
CIRKAN.................................................................................................................8
NATERIA..............................................................................................................14
CLEANER............................................................................................................13
ORITES.......................................................................................................... 12-21
COOLELF..............................................................................................................7
OSYRIS...............................................................................................................49
COPAL.................................................................................................................30
PARATEX.............................................................................................................57
CORTIS............................................................................................................. 8-9
PLANETELF.........................................................................................................11
CYL........................................................................................................................9
PNEUMA.............................................................................................................21
DACNIS......................................................................................................... 10-12
PRESLIA..............................................................................................................25
DETERFIX...................................................................................................... 58-59
PV........................................................................................................................12
DIEL.....................................................................................................................44
DISOLA................................................................................................................14 SERADE..............................................................................................................43
DRASTA...............................................................................................................47 SERIOLA..............................................................................................................17
DROSERA...........................................................................................................50 SPECIS................................................................................................................37
ELECTROFIX.......................................................................................................57 SPIRIT.................................................................................................................42
EMETAN..............................................................................................................22 STATERMIC.........................................................................................................37
EQUIVIS...............................................................................................................19 TEXINOL..............................................................................................................56
FINADET..............................................................................................................13 TIXO............................................................................................................... 56-59
FINAROL.............................................................................................................47 TORILIS...............................................................................................................23
FINASOL..............................................................................................................13 TOTAL AUTOMATIC GREASE SYSTEM .............................................................37
FINATUROL.........................................................................................................23 TOTAL NEVASTANE...............................7-9-10-15-17-18-19-31-35-36-61-62-63
FINAVESTAN.......................................................................................................22 VALONA...................................................................................................39-40-41
GLACELF...............................................................................................................7 VULSOL...............................................................................................................42
GRANITCUT........................................................................................................42 WT.........................................................................................................................7
Index 66
ISO VG 15 15 13.5 16.5 3 220 - 250 • Oxidizing, corrosive or inflammable substances: chlorine, oxygen, acids, bases, solvents, etc.
ISO VG 46 46 41.4 50.6 ABBREVIATIONS For access to material safety data sheets please visit
www.quickfds.com
ISO VG 68 68 61.2 74.8
• HACCP: “Hazard Analysis and Critical Control Point”. ENVIRONMENT
ISO VG 100 100 90 110
A risk analysis and critical control point method,
ISO VG 150 150 135 165 in the Agrifood Industry. The storage areas must permit easy recovery (pumping, absorption) in the event of accidental leaks, with no discharges into the natural
environment.
ISO VG 220 220 198 242 • HSE: Health, Safety, Environment.
A tank or a holding facility is recommended, even mandatory, depending on the legislation in force.
ISO VG 320 320 288 352 • FZG: Forschung für ZahnradGetriebe.
Method for assessing the extremepressure properties
ISO VG 460 460 414 506 of lubricants, ISO 14635 standard.
ISO VG 680 680 612 748 • PAG: Poly Alkylene Glycols.
ISO VG 1000 1000 900 1100 • PAO: Polyalphaolefins.
ISO VG 1500 1500 1350 1650 • POE: Polyol Esters.
ISO VG 2200 2200 1980 2420 • TOST: Turbine Oil Stability Test, ASTM D943 standard.
ISO VG 3200 3200 2880 3520
Appendix 67
References &OEMs
TOTAL Lubricants cooperates with equipment
manufacturers to create high-technology
products for optimal performance
and protection of your machinery.