Professional Documents
Culture Documents
2
W-series
W-series
Weidmüller is the world wide market lea- Cross-connection with a system Continuous innovation
der in terminal blocks. W-series constantly
sets new standards. The systematics of
W-series are on continuous bases impro-
ved:
l same dimensions in a range from
2.5 – 35 mm2, features a.o. disconnect
and fuse functions
l pluggable cross-connections for 75%
of all applications lContact point
3
Feed-through terminal blocks WDU 2.5N/ZQV WDU 1.5/ZZ WDU 2.5/1.5/ZR WDU 2.5
WDU 2.5N V V V WDU 2.5/10/BEZ
Q Z ZQ ZQ V
ZQ
W W W W
Max. technical data 30 A/4 mm2 23 A/2.5 mm2 32 A/4 mm2 32 A/4 mm2
Dimensions / Approvals a r i q GOST LR u DNV a r i q GOST LR u a r i q GOST LR u DNV a r i q GOST LR u DNV
Width/length/height (mm) with TS 35 x 7.5 W 5/44/37.5 5/60/47 5/60/47 5/60/47
Insulation stripping length/clamping screw/screwdriver blade 10 mm/M 2.5/3.5 x 0.6 7 mm/M 2.5/3.5 x 0.6 10/7 mm/M 2.5/3.5 x 0.6 10 mm/M 2.5/3.5 x 0.6
VDE rated data, 0611 Part 1/8.92/IEC 60 947-7-1
Rated voltage/rated current/rated cross-section 500 V/24 A/2.5 mm2 690 V/17.5 A/1.5 mm2 690 V/24/17.5 A/2.5/1.5 mm2** 800 V/24 A/2.5 mm2
Rated impulse voltage/pollution severity 6 kV/3 8 kV/3 8 kV/3 8 kV/3
4
WDK 2.5/ZQV WDK 2.5 WDK 2.5 V WDK 2.5 DU-PE WDK 2.5 E
WDK 2.5 800 V WDK 2.5 E GET.SCH.
QV
W-series
400 V Z Terminal blocks for electrical
components
W W W W W
Terminal blocks with electrical
components see page 46
24 A/2.5 mm2 24 A/2.5 mm2 24 A/2.5 mm2 24 A/2.5 mm2/-/- -/2.5 mm2 m2
a r i GOST LR u DNV i q GOST LR u DNV a r q GOST LR u a q GOST a
5/69/63 6/69/63 5/69/63 5/69/63 5/69/63
10 mm/M 2.5/3.5 x 0.6 10 mm/M 2.5/3.5 x 0.6 10 mm/M 2.5/3.5 x 0.6 10 mm/M 2.5/3.5 x 0.6 10 mm/M 2.5/3.5 x 0.6
400 V/24 A/2.5 mm2 800 V/24 A/2.5 mm2 400 V/24 A/2.5 mm2 400 V/-/24 A/-/2.5 mm2 -/-/2.5 mm2
6 kV/3 8 kV/3 6 kV/3 6 kV/3
300 V/20
A/22…12 AWG 300 V/20 A/22…12 AWG 300 V/20 A/22…12 AWG 300 V/20 A/22…12 AWG
300 V/10
A/26…12 AWG 300 V/10 A/26…12 AWG
for ZQV Qty. for WQV Qty. W Cat. No. Qty. W Cat. No. Qty. W Cat. No. Qty. W Cat. No. Qty.
104110 100 102150 100 102910 100 102230 100 103640 100 102320 100
104118 100 102158 100 102238 100 Lower connection range 102310 100
102156 100 marked green-yellow (Beige Wernid with divided
102561 10 102560 10 current bar below)
102571 10 102570 10
Type Cat. No. Qty. Type Cat. No. Qty. Type Cat. No. Qty. Type Cat. No. Qty. Type Cat. No. Qty.
WAP 105910 20 WAP 105910 20 WAP 105910 20 WAP 105910 20 WAP 105910 20
WAP 105918 20 WAP 105918 20 WAP 105918 20
WTW 105880 20 WTW 105880 20 WTW 105880 20 WTW 105880 20 WTW 105880 20
PS 2.3 (ø 2.3) 018040 20 PS 2.3 (ø 2.3) 018040 20 PS 2.3 (ø 2.3) 018040 20 PS 2.3 (ø 2.3) 018040 20 PS 2.3 (ø 2.3) 018040 20
StB 8.5 (ø 2.3) 021570 50 StB 8.5 (ø 2.3) 021570 50 StB 8.5 (ø 2.3) 021570 50 StB 8.5 (ø 2.3) 021570 50 StB 8.5 (ø 2.3) 021570 50
AD 3 048540 20x1m AD 3 048540 20x1m AD 3 048540 20x1m AD 3 048540 20x1m AD 3 048540 20x1m
HP 3 048576 20 HP 3 048576 20 HP 3 048576 20 HP 3 048576 20 HP 3 048576 20
WAD 4 107200 50 WAD 4 107200 50 WAD 4 107200 50 WAD 4 107200 50 WAD 4 107200 50
WT 4 134106 100 WT 4 134106 100 WT 4 134106 100 WT 4 134106 100 WT 4 134106 100
SF 10 033240 1000 SF 10 033240 1000 SF 10 033240 1000 SF 10 033240 1000 SF 10 033240 1000
SG 10 033250 1000 SG 10 033250 1000 SG 10 033250 1000 SG 10 033250 1000 SG 10 033250 1000
DEK 5 047346 500 DEK 5 047346 500 DEK 5 047346 500 DEK 5 047346 500 DEK 5 047346 500
DEK 5 047356 500 DEK 5 047356 500 DEK 5 047356 500 DEK 5 047356 500 DEK 5 047356 500
WS 8/5 164074 720 WS 8/5 164074 720 WS 8/5 164074 720 WS 8/5 164074 720 WS 8/5 164074 720
WS 8/5 158008 200 WS 8/5 158008 200 WS 8/5 158008 200 WS 8/5 158008 200 WS 8/5 158008 200
5
Feed-through terminal blocks WDK 2.5N WDK 2.5N V WDK 2.5N DU-PE WDK 4N
V V V
ZQ ZQ V ZQ
ZQ
W W W W
Max. technical data
Dimensions / Approvals a r i q GOST LR u DNV a r i q GOST LR u a r i q GOST LR u DNV a r i q GOST LR u DNV
Width/length/height (mm) with TS 35 x 7.5 W 5/60/62 5/60/62 5/60/62 6/60/64
Insulation stripping length/clamping screw/screwdriver blade 8 mm/M 2.5/3.5 x 0.6 8 mm/M 2.5/3.5 x 0.6 8 mm/M 2.5/3.5 x 0.6 8 mm/M 3/3.5 x 0.6
VDE rated data 0611, Part 1/8.92/IEC 60 947-7-1
Rated voltage/rated current/rated cross-section 800 V/24 A/2.5 mm2 800 V/24 A/2.5 mm2 800 V/24 A/2.5 mm2 800 V/32 A/4 mm2
Rated impulse voltage/pollution severity 8 kV/3 8 kV/3 8 kV/3 8 kV/3
Further technical data
Tightening torque range Nm 0.4...0.6 0.4...0.6 0.4...0.6 0.5...1.0
Torque setting with DMS 2 electric screwdriver 1 1 1 2
Clampable conductor
Solid H07V-U mm2 0.5…4 0.5…4 0.5…4 0.5…6
Stranded H07V-R mm2 1.5…4 1.5…4 1.5…4 1.5…6
Solid H07V-K mm2 0.5…4 0.5…4 0.5…2.5 0.5…4
Flexible H07V-K and ferrule according to DIN 46 228/1 mm2 0.5…2.5 0.5…2.5 0.5…2.5 0.5…4
Flexible H07V-K and ferrules with plastic insul. collar mm2 0.5…2.5 0.5…2.5 0.5…2.5 0.5…4
Max. Clamping Range in mm2 Gauge pin to IEC 60 947-1 Size 0.13…4 A3 0.13…4 A3 0.13…4 A3 0.13…6 A4
Continuous current raiting WQV/ZQV 2–5-pole A -/24 -/24 -/24 -/32
of cross-connection WQV/ZQV 6–10-pole A -/24 -/24 -/24 -/32
UL/CSA rated data
Voltage/current/conductor size UL 600 V/20 A/26…12 AWG* 600 V/20 A/26…12 AWG* 600 V/20 A/26…12 AWG* 600 V/35 A/26…10 AWG*
Voltage/current/conductor size CSA 600 V/20 A/26…12 AWG* 600 V/20 A/26…12 AWG* 600 V/20 A/26…12 AWG* 600 V/35 A/26…10 AWG*
Ordering data Version Type Cat. No. Qty. Type Cat. No. Qty. Type Cat. No. Qty. Type Cat. No. Qty.
Beige Wemid 104160 0000 100 104161 0000 100 104165 0000 100 104190 0000 100
Blue Wemid 104168 0000 100 Lower connection range 104198 0000 100
Orange PA 104166 0000 100 marked green-yellow 104196 0000 100
10-pole terminal block printed 1–9 Wemid 104170 0000 10 104200 0000 10
10-pole terminal block unprinted* Wemid 104180 0000 10 104210 0000 10
End plate/partition Type Cat. No. Qty. Type Cat. No. Qty. Type Cat. No. Qty. Type Cat. No. Qty.
WAP (thickness 1.5 mm) Beige Wemid WAP 108400 0000 20 WAP 108400 0000 20 WAP 108400 0000 20 WAP 108400 0000 20
Blue Wemid WAP BL 108408 0000 20 WAP BL 108408 0000 20 WAP BL 108408 0000 20 WAP BL 108408 0000 20
WTW Beige Wemid WTW 105880 20 WTW 105880 20 WTW 105880 20 WTW 105880 20
Cross-connection Type Cat. No. Qty. Type Cat. No. Qty. Type Cat. No. Qty. Type Cat. No. Qty.
WQV WQB 8/24 Screen lug LS 2.8 2-pole ZQV 2.5N/2 169380 60 ZQV 2.5N/2 169380 60 ZQV 2.5N/2 169380 60 ZQV 4N/2 175825 60
3-pole ZQV 2.5N/3 169381 60 ZQV 2.5N/3 169381 60 ZQV 2.5N/3 169381 60 ZQV 4N/3 176263 60
4-pole ZQV 2.5N/4 169382 60 ZQV 2.5N/4 169382 60 ZQV 2.5N/4 169382 60 ZQV 4N/4 176262 60
ZQV 2.5N 5-pole ZQV 2.5N/5 169383 20 ZQV 2.5N/5 169383 20 ZQV 2.5N/5 169383 20
6-pole ZQV 2.5N/6 169384 20 ZQV 2.5N/6 169384 20 ZQV 2.5N/6 169384 20
7-pole ZQV 2.5N/7 169385 20 ZQV 2.5N/7 169385 20 ZQV 2.5N/7 169385 20
8-pole ZQV 2.5N/8 169386 20 ZQV 2.5N/8 169386 20 ZQV 2.5N/8 169386 20
9-pole ZQV 2.5N/9 169387 20 ZQV 2.5N/9 169387 20 ZQV 2.5N/9 169387 20
10-pole ZQV 2.5N/10 169388 20 ZQV 2.5N/10 169388 20 ZQV 2.5N/10 169388 20 ZQV 4N/10 175826 20
41-pole/50-pole ZQV 2.5N/50 169389 10 ZQV 2.5N/50 169389 10 ZQV 2.5N/50 169389 10 ZQV 4N/41 175827 10
LS 2.8 LS 2.8 105640 50 LS 2.8 105640 50 LS 2.8 105640 50
WQB WQB B/24 157906 20 WQB B/24 157906 20 WQB B/24 157906 20
Notching tool WAW 1 for WQV
Test adapter
WTA TA 1 TA 1 053586 20 TA 1 053586 20 TA 1 053586 20 TA 1 053586 20
Strain relief
Test plug/socket
PS 2.3 StB 8.5
Cover
WAD with Symbol
WAD white
Marking tags Print
DEK Consecutive horizontal DEK 5 047346 500 DEK 5 047346 500 DEK 5 047346 500 DEK 6 046866 500
DEK Consecutive vertical DEK 5 047356 500 DEK 5 047356 500 DEK 5 047356 500 DEK 6 046876 500
WS Blank WS 8/5 164074 720 WS 8/5 164074 720 WS 8/5 164074 720 WS 8/5 164074 720
DEK WS WS Printed WS 8/5 158008 200 WS 8/5 158008 200 WS 8/5 158008 200 WS 8/5 158008 200
Mounting rails, end brackets, further marking material see section “Accessories”
* Approvals pending
6
WDK 4N V WDK 4N DU-PE WDU 4
WDU 4/10/BEZ
W-series
V
V ZQ
ZQ Z QV
W W W
41 A/6 mm2 -/2.5 mm2 -/2.5 mm2 41 A/6 mm2
a r i q GOST LR u DNV a r i q GOST LR u DNV a r i q GOST LR u DNV
6/60/64 6/60/64 6/60/47
8 mm/M 3/3.5 x 0.6 8 mm/M 3/3.5 x 0.6 10 mm/M 3/3.5 x 0.6
800 V/32 A/4 mm2 800 V/32 A/4 mm2 800 V/32 A/4 mm2
8 kV/3 8 kV/3 8 kV/3
600 V/35 A/26…10 AWG* 600 V/35 A/26…10 AWG* 600 V/35 A/22…10 AWG
600 V/35 A/26…10 AWG* 600 V/35 A/26…10 AWG* 600 V/35 A/26…10 AWG
Type Cat. No. Qty. Type Cat. No. Qty. W Cat. No. Qty.
104191 0000 100 104195 0000 100 102010 100
Lower connection range 102018 100
marked green-yellow 102090 10
102100 10
Type Cat. No. Qty. Type Cat. No. Qty. Type Cat. No. Qty.
WAP 108400 0000 20 WAP 108400 0000 20 WAP 2.5-10 105000 50
WAP BL 108408 0000 20 WAP BL 108408 0000 20 WAP 2.5-10 105008 50
WTW 105880 20 WTW 105880 20 WTW 2.5-10 105010 20
WTW 2.5-10 105018 20
Type Cat. No. Qty. Type Cat. No. Qty. ZQV4N Qty. WQV Qty.
ZQV 4N/2 175825 60 ZQV 4N/2 175825 60 175825 60 105196 50
ZQV 4N/3 176263 60 ZQV 4N/3 176263 60 176263 60 105456 50
ZQV 4N/4 176262 60 ZQV 4N/4 176262 60 176262 60 105466 50
WAD 5 105346 50
WAD 5 white 105606 50
7
Feed-through terminal blocks WMA 4/5 WDU 6 WDU 10 WDU 16N
V WDU 6/10/BEZ
WMA 4/4 ZQ
W W W
Max. technical data 41 A/6 mm2 57 A/10 mm2 76 A/16 mm2 82 A/25 mm2
Dimensions / Approvals a r i q GOST LR u DNV a r i q GOST LR u DNV a r i GOST
Width/length/height (mm) with TS 35 x 7.5 W 60/60/47 8/60/47 10/60/47 12/60/47
Insulation stripping length/clamping screw/screwdriver blade 10 mm/M 3/3.5 x 0.6 12 mm/M 3.5/4.0 x 0.8 12 mm/M 4/5.5 x 1.0 12 mm/M 4/5.5 x 1.0
VDE rated data 0611, Part 1/8.92/IEC 60 947-7-1
Rated voltage/rated current/rated cross-section 800 V/32 A/4 mm2 800 V/41 A/6 mm2 800 V/57 A/10 mm2 400 V/76 A/16 mm2
Rated impulse voltage/pollution severity 8 kV/3 8 kV/3 8 kV/3 6 kV/3
Further technical data
Tightening torque range Nm 0.5...1.0 0.8...1.6 1.2...2.4 1.2...2.4
Torque setting with DMS 2 electric screwdriver 2 3 4 4
Clampable conductor
Solid H07V-U mm2 0.5…6 0.5…10 1.5…16 1.5…16
Stranded H07V-R mm2 1.5…6 1.5…10 1.5…16 1.5…25
Flexible H07V-K mm2 0.5…6 0.5…10 1.5…16 1.5…16
Flexible H07V-K and ferrule according to DIN 46 228/1 mm2 0.5…4 0.5…6 1.5…16 1.5…16
Flexible H07V-K and ferrule with plastic insul. collar mm2 0.5…4 0.5…6 1.5…16 1.5…16
Max. Clamping Range in mm2 Gauge pin to IEC 60 947-1 Size 0.13…6 A4 0.5…10 A5 1.31…16 B6 1.5…25 B7
Continuous current rating 2-pole WQV/ZQV A 46/32 63/- 85/- 76/-
of cross-connection multipole WQV/ZQV A 46/32 63/- 63/- 57 (3 + 4-pole)/-
UL/CSA rated data
Voltage/current/conductor size UL 600 V/45 A/20…8 AWG 600 V/60 A/16…6 AWG 300 V/70 A/14...6 AWG
Voltage/current/conductor size CSA 600 V/45 A/20…8 AWG 600 V/65 A/16…6 AWG 300 V/45 A/20…8 AWG
Ordering data Version W Cat. No. Qty. W Cat. No. Qty. W Cat. No. Qty. W Cat. No. Qty.
Beige Wemid 102020 50 102030 50 103610 50
Blue Wemid 102028 50 102038 50 103618 50
Terminal block printed 1–9 Wemid 102140 10
Terminal block unprinted* Wemid 102130 10
Motor connection block (L1, L2, L3, PE) Wemid WMA 4/4 103400 20
Motor connection block (L1, L2, L3, N, PE) Wemid WMA 4/5 103380 20
End plate/partition Type Cat. No. Qty. Type Cat. No. Qty. Type Cat. No. Qty. Type Cat. No. Qty.
WAP (thickness 1.5 mm) Beige Wemid WAP 2.5-10 105000 50 WAP 2.5-10 105000 50 WAP 2.5-10 105000 50
Blue Wemid WAP 2.5-10 105008 50 WAP 2.5-10 105008 50 WAP 2.5-10 105008 50
WTW Beige Wemid WTW 2.5-10 105010 20 WTW 2.5-10 105010 20 WTW 2.5-10 105010 20 WTW EX 105880 20
Blue Wemid WTW 2.5-10 105018 20 WTW 2.5-10 105018 20 WTW 2.5-10 105018 20
Cross-connection ZQV4N Qty. WQV Qty.
WQV Screen lug LS 2.8 2-pole 175825 60 105196 50 WQV 6/2** 105236 50 WQV 10/2 105256 50 WQV 16N/2 163656 50
3-pole 176263 60 105456 50 WQV 6/3** 105476 50 WQV 10/3 105496 50 WQV 16N/3 163657 50
4-pole 176262 60 105466 50 WQV 6/4** 105486 50 WQV 10/4 105506 50 WQV 16N/4 163658 50
10-pole 175826 20 105206 20 WQV 6/10** 105226 20 WQV 10/10 105246 20
175827 10 (41-pole)
LS 2.8 105640 50 LS 2.8 105640 50 LS 2.8 105640 50
Notching tool WAW 1 for WQV WAW 1 900450 1 WAW 1 900450 1 WAW 1 900450 1 WAW 1 900450 1
Test adapter
WTA 5 WTA 3 WTA 3 163235 50
WTA 3/ZA 163236 50 WTA 5/1 105126 25 WTA 5/1 105126 25
WTA 3/10 163237 5
(Strain relief) ZE 1 163215 50
Test plug/socket
PS 2.3 StB 8.5 PS 2.3 (ø 2.3) 018040 20 PS 2.3 (ø 2.3) 018040 20 PS 2.3 (ø 2.3) 018040 20 PS 2.3 (ø 2.3) 018040 20
PS 4 (ø 4) 029960 20 PS 4 (ø 4) 029960 20 PS 4 (ø 4) 029960 20
StB 8.5 (ø 2.3) 028060 50 StB 8.5 (ø 2.3) 028060 50 StB 8.5 (ø 2.3) 028060 50 StB 8.5 (ø 2.3) 028060 50
StB 14 (ø 4) 016990 50 StB 14 (ø 4) 016990 50 StB 14 (ø 4) 016990 50
Cover
WAD with Symbol WAD 5 105346 50 WAD 8 105356 50 WAD 8 105356 50 WAD 12 N 107320 50
WAD white WAD 5 white 105606 50 WAD 8 white 105616 50 WAD 8 white 105616 50 WAD 12 N white107329 50
for self-labeling
Group marking
T5 WGB WGB 5 105076 50 WGB 8 105096 50 WGB 8 105096 50
8
WDU 16 WDU 16/ZA* WDU 35N WDU 35 WDU 35/ZA* WDU 70N
W-series
W W W W W
101 A/25 mm2 101 A/25 mm2 150 A / 50 mm2 150 A/50 mm2 150 A/50 mm2 192 A/70 mm2
a r i q GOST LR u DNV a r GOST a r i q GOST LR u DNV a r GOST
12/60/63 12/60/63 16/66/51 16/60/63 16/60/63 20.5/75/86
16 mm/M 5/5.5 x 1.0 16 mm/M 5/5.5 x 1.0 18 mm/M 6/5.5 x 1.0 18 mm/M 6/6.5 x 1.2 18 mm/M 6/6.5 x 1.2 22 mm/M 8/S 6 DIN 6911
1000 V/76 A/16 mm2 1000 V/76 A/16 mm2 400 V/125 A/35 mm2 1000 V/125 A/35 mm2 1000 V/125 A/35 mm2 1000 V/192 A/70 mm2
8 kV/3 8 kV/3 6 kV/3 8 kV/3 8 kV/3 8 kV/3
conductor strips
1.5…16 1.5…16 2.5...16 2.5...16 2.5...16 10...16 3 x 9 x 0.8
1.5…25 1.5…25 2.5…50 2.5…50 2.5…50 10...95 6 x 9 x 0.8
1.5…25 1.5…25 2.5…35 2.5…35 2.5…35 10...70 9 x 9 x 0.8
1.5…16 1.5…16 2.5…35 2.5…35 2.5…35 10...70
1.5…16 1.5…16 2.5…35 2.5…35 2.5…35 10...70
1.5…25 B7 1.5…25 B7 2.5…50 B9 2.5…50 B9 2.5…50 B9 10...95 B 11
101/- 101/- 115/- 138/- 138/- 192/-
63/- 63/- 100/- 112/- 112/- 192 (3-pole)/-
600 V/70 A/14…6 AWG 300 V/10 A/12...2 AWG 600 V/115 A/12…2 AWG 600 V/175 A/6...2/0 AWG
600 V/65 A/14…6 AWG 300 V/10 A/12…2 AWG 600 V/120 A/12…2 AWG 600 V/205 A/8...2/0AWG
W Cat. No. Qty. W Cat. No. Qty. W Cat. No. Qty. W Cat. No. Qty. W Cat. No. Qty. W Cat. No. Qty.
102040 50 102890 50 104040 20 102050 40 102880 25 WDU70N/35 951219 10
102048 50 102898 50 104048 20 102058 40 102888 25 WDU70N/35BL 951242 10
(hexagon socket)102060** 25 (hexagon socket)102900** 25 (WDU 70N only with hexagon
(hexagon socket)102068** 25 (hexagon socket)102908** 25 socket)
Type Cat. No. Qty. Type Cat. No. Qty. Type Cat. No. Qty. Type Cat. No. Qty. Type Cat. No. Qty. Type Cat. No. Qty.
WAP 16–35 105010 20 WAP 16–35 105010 20 WAP 16–35 105010 20 WAP 16–35 105010 20
WAP 16–35 105018 20 WAP 16–35 105018 20 WAP 16–35 105018 20 WAP 16–35 105018 20
WQV 16/2 105326 50 WQV 16/2 105326 50 WQV 35N/2 107920 50 WQV 35/2 105306 50 WQV 35/2 105306 50 WQV 70N/2 951224 5
WQV 16/3 105516 50 WQV 16/3 105516 50 WQV 35N/3 107930 50 WQV 35/3 105536 50 WQV 35/3 105536 50 WQV 70N/3 951225 5
WQV 16/4 105526 50 WQV 16/4 105526 50 WQV 35N/4 107940 50 WQV 35/4 105546 50 WQV 35/4 105546 50 WQV 70N/4 953129 5
WQV 16/10 105336 10 WQV 16/10 105336 10 WQV 35/10 105316 10 WQV 35/10 105316 10
WQV 16/2 blue 105328 50 WQV 16/2 blue 105328 50 WQV 35/2 blue 105308 50 WQV 35/2 blue 105308 50
WAD 12 105596 50 WAD 12 105596 50 WAD 16 N 108360 50 WAD 12 105596 50 WAD 12 105596 50 WAD 20 951226 20
WAD 12 white 105626 50 WAD 12 white 105626 50 WAD 16 N white 108350 50 WAD 12 white 105626 50 WAD 12 white 105626 50 WAD 20 white 951227 20
T5 034850 100 T5 034850 100 T5 034850 100 T5 034850 100 T5 034850 100 T5 034850 100
SF 10 033240 1000 SF 10 033240 1000 SF 10 033240 1000 SF 10 033240 1000 SF 10 033240 1000 SF 10 033240 1000
SG 10 033250 1000 SG 10 033250 1000 SG 10 033250 1000 SG 10 033250 1000 SG 10 033250 1000 SG 10 033250 1000
DEK 5 047346 500 DEK 5 047346 500 DEK 5 047346 500 DEK 5 047346 500 DEK 5 047346 500 DEK 5 047346 500
DEK 5 047356 500 DEK 5 047356 500 DEK 5 047356 500 DEK 5 047356 500 DEK 5 047356 500 DEK 5 047356 500
WS 12/6.5 160992 540 WS 12/6.5 160992 540 WS 12/6.5 160992 540 WS 12/6.5 160992 540 WS 12/6.5 160992 540 WS 12/6.5 160992 540
WS 12/6.5 156895 100 WS 12/6.5 156895 100 WS 12/6.5 156895 100 WS 12/6.5 156895 100 WS 12/6.5 156895 100 WS 12/6.5 156895 100
* with spigots
9
Feed-through terminal blocks WDU 70/95
Large size conductors no longer have to Max. technical data 232 A/95 mm2
be inserted into the clamping point with Dimensions / Approvals a r i q GOST LR u DNV
Width/length/height (mm) with TS 35 x 7.5 W 27/132/108
force; they can simply be placed in the ter-
Insulation stripping length/clamping screw/wrench size acc. DIN 6911 30 mm/M 8/S 6
minal block.
VDE rated data 0611, Part 1/8.92/IEC 60 947-7-1
For each terminal type, terminal block Rated voltage/rated current/rated cross-section 1000 V/232 A/95 mm2
variants consisting of three, four and five- Rated impulse voltage/pollution severity 8 kV/3
pole terminal blocks are available in addi- Further technical data
tion to the individual terminals. All blocks Tightening torque range Nm 6...12
are permanently screwed together for Torque setting with DMS 2 electric screwdriver
additional torsional rigidity. Clampable conductor
Slots provided in the underside of the ter- Solid H07V-U mm2 16
Stranded H07V-R mm2 16…120**
minals enable direct fitting. Terminal blocks
Flexible H07V-K mm2 16…95**
can be screwed directly to mounting pla-
Flexible H07V-K and ferrule according to DIN 46 228/1 mm2 35...95**
tes with 25 mm pitch. Flexible H07V-K and ferrule with plastic insul. collar mm2 35...50
Further advantages are: Strips mm 3 x 9 x 0.8 6 x 9 x 0.8
Strips mm 4 x 16 x 0.8 6 x 16 x 0.8
• Constant force transmission by self- Max. clamping range in mm2, Gauge pin to IEC 60 947-1 Size 16…120 B 12
adjusting connection system Continuous current rating of cross-connection 2-pole A 232
Continuous current rating of cross-connection multipole A (3) 232
• Random wiring direction UL/CSA rated data
Voltage/current/conductor size UL 600 V/175 A/6…2/0 AWG
• Safe from finger-touch (VBG 4), even
Voltage/current/conductor size CSA 600 V/205 A/6…2/0 AWG
with cross-connection fitted
Ordering data Version W Cat. No. Qty.
• Extreme distortion resistance Hexagon socket 6 mm Beige Wemid 102460 10
Hexagon socket 6 mm Blue Wemid 102468 10
Hexagon socket 6 mm Green Wemid 102465 10
Hexagon socket 6 mm Terminal block* 3-pole Wemid
Hexagon socket 6 mm Terminal block* 4-pole Wemid
Hexagon socket 6 mm Terminal block* 5-pole Wemid
Mains terminal block 3x beige, 1x blue, 1x green Wemid
Cross-connection Type Cat. No. Qty.
WQV 70/2 106350 5
WQV 70/3 106360 5
Cover
Yellow WAD 27
with warning tag 106286 10
White WAD 27
without warning tag 106296 10
Test plug
PS 4 029960 20
fits into screw head of the connection system
Fixing screw
Place conductor in terminal,
For direct assembly M 6x16 106370 20
and replace screw terminal
unit
Hexagon key
Hex. key 040790 1
6 mm to DIN 6911
Screwdriver for direct assembly 1 x 5.5 x 125
SDI 900841 1
10
WDU 70/95/...
70/95/… WDU 120/150 WDU 120/150/...
120/150/…
W-series
Drilling plan for direct mounting X Drilling plan for direct mounting
232 A/95 mm2 309 A/150 mm2 309 A/150 mm2
a r i q GOST LR u DNV a r i q GOST LR u DNV a r i q GOST LR u DNV
81/132/108 (triple block)* 32/132/118 96/132/118 (triple block)*
30 mm/M 8/S 6 35 mm/M 10/S 6 35 mm/M 10/S 6
1000 V/232 A/95 mm2 1000 V/269 A/120 mm2 1000 V/269 A/120 mm2
8 kV/3 8 kV/3 8 kV/3
16 – –
16…120** 35…150 35…150
16…95** 35…150 35…150
35...95**
35...50
3 x 9 x 0.8 6 x 9 x 0.8 3 x 9 x 0.8 6 x 9 x 0.8 3 x 9 x 0.8 6 x 9 x 0.8
4 x 16 x 0.8 6 x 16 x 0.8 4 x 16 x 0.8 6 x 16 x 0.8 4 x 16 x 0.8 6 x 16 x 0.8
16…120 B 12 35…150 B 13 35…150 B 13
232 292 292
(3) 232 (3) 292 (3) 292
600 V/175 A/6…2/0 AWG 600 V/225 A/2…MCM 250 AWG 600 V/225 A/2…MCM 250 AWG
600 V/205 A/6…2/0 AWG 600 V/285 A/2…MCM250 AWG 600 V/285 A/2…MCM 250 AWG
Type Cat. No. Qty. W Cat. No. Qty. Type Cat. No. Qty.
102450 10
102458 10
102455 10
102670* 4 102640* 3
102680* 3 102650* 2
102690* 2 102660* 2
103230* 2 103240* 2
Type Cat. No. Qty. Type Cat. No. Qty. Type Cat. No. Qty.
WQV 70/2 106350 5 WQV 120/2 106330 5 WQV 120/2 106330 5
WQV 70/3 106360 5 WQV 120/3 106340 5 WQV 120/3 106340 5
11
Tab connection terminals WFF 35 WFF 70
W W
Drilling plan for direct mounting Drilling plan for direct mounting
Max. technical data 50 A/50 mm2 232 A/95 mm2
Dimensions / Approvals a r i q GOST LR u a r i q GOST LR u
Width/length/height (mm) without WAH 27/107/54 32/132/63
Width/length/height (mm) with WAH 27/136/60 32/179/71.5
Bolt size M 6 8
VDE rated data 0611, Part 1/8.92/IEC 60 947-7-1
Rated voltage/rated current/rated cross-section 1000 V/125 A/35 mm2 1000 V/192 A/70 mm2
Rated impulse voltage/pollution severity 8 kV/3 8 kV/3
Further technical data
Tightening torque range Nm 3.0...6.0 6.0...12
Clampable conductor
Cable lug DIN 46 235 mm2 6…25 16…70
Cable lug DIN 46 234 mm2 2.5…50 2.5…120
2 x cable lug DIN 46 235 mm2 6…25 16…70
2 x cable lug DIN 46 234 mm2 2.5…35 2.5…70
Strips mm 3 x 13 x 0.5 2 x 15.5 x 0.8 4 x 20 x 1
Strips mm 6 x 13 x 0.5 4 x 15.5 x 0.8
Strips mm 2 x 15.5 x 0.8 6 x 15.5 x 0.8
Max. connection area in mm2 ,Gauge for flat connections 2.08…50 C4 2.08…120 C6
to 50043 Size 135 207
Continuous current rating of cross-connection 2-pole A 135 207
Continuous current rating of cross-connection 3-pole A
UL/CSA rated data 1000 V/115 A/14…2 AWG 1000 V/175 A/14…2/0 AWG
Voltage/current/conductor size UL 600 V/130 A/14…2 AWG 600 V/170 A/14…2/0 AWG
Voltage/current/conductor size CSA W Cat. No. Qty. W Cat. No. Qty.
Ordering data Version 102830 10 102840 10
Beige Wemid 102838 10 102848 10
Blue Wemid
102930 10 102940 10
With covers Beige Wemid
Beige Wemid Type Cat. No. Qty. Type Cat. No. Qty.
Partition (thickness 2 mm) WTW WFF 35 106710 10 WTW WFF 70 106720 10
12
WFF 120 WFF 185 / WFF 185 M 12 + M 16 WFF 300
W-series
W W W
Drilling plan for direct mounting Drilling plan for direct mounting Drilling plan for direct mounting
309 A/150 mm2 415 A/240 mm2 520 A/300 mm2
a r i q GOST LR u a r i q GOST LR u a r i q GOST LR
42/132/72 55/163/78 55/163/86
42/230/81 55/287/91 55/287/90
10 12 16
1000 V/269 A/120 mm2 1000 V/353 A/185 mm2 1000 V/520 A/300 mm2
8 kV/3 8 kV/3 8 kV/3
1000 V/310 A/10…MCM 250 AWG 1000 V/380 A/8…MCM 500 AWG 1000 V/500 A/6…MCM 600 AWG
600 V/310 A/10…MCM 250 AWG 600 V/360 A/8…MCM 500 AWG 600 V/510 A/6…MCM 600 AWG
W Cat. No. Qty. W Cat. No. Qty. W Cat. No. Qty.
102850 5 102860 4 102870 4
102858 5 102868 4 102878 4
13
Protective conductor terminal blocks WPE 2.5N WPE 1.5/ZZ WPE 2.5 WPE 2.5/1.5/ZR
W W a r i q GOST LR u DNV
W
Dimensions / Approvals a r i q GOST LR u a r i q GOST LR u a r i q GOST LR u DNV a r i q GOST LR u
Width/length/height (mm) with TS 35 x 7.5 W 5/54/37.5 5/60/47 5/60/47 5/60/47
Insulation stripping length/clamping screw/screwdriver blade 10 mm/M 2.5/3.5 x 0.6 7 mm/M 2.5/3.5 x 0.6 10 mm/M 2.5/3.5 x 0.6 10/7 mm/M 2.5/3.5 x 0.6
VDE rated data 0611, Part 3/IEC 60 947-7-2
Rated voltage/current for PEN/cross-section – V/– A/2.5 mm2 – V/– A/1.5 mm2 – V/– A/2.5 mm2 – V/– A/2.5/1.5 mm2
Rated voltage/impulse voltage/pollution severity adjacent terminal 500 V/6 kV/3 690 V/8 kV/3 800 V/8 kV/3 690 V/8 kV/3
Further technical data
Tightening torque range Nm 0.4...0.6 0.4...0.6 0.4...0.7 0.4...0.6
Torque setting with DMS 2 electric screwdriver 1/1 1/1 1/1 1/1
Clampable conductor
Solid H07V-U mm2 0.5…4 0.5…2.5 0.5…4 0.5…4/2.5
Stranded H07V-R mm2 1.5…4 1.5…2.5 1.5…4 1.5…4/2.5
Flexible H07V-K mm2 0.5…4 0.5…1.5 0.5…4 0.5…4/1.5
Flexible H07V-K and ferrule according to DIN 46 228/1 mm2 0.5…4 0.5…1.5 0.5…2.5 0.5…2.5/1.5
Flexible H07V-K and ferrules with plastic insul. collar mm2 0.5…2.55) 0.5…1.55) 0.5…2.55) 0.5…2.5/1.55)
AWG conductor Nr. 26…12 26…14 26…12 26…12/14
Max. clamping range in mm2, Gauge pin to IEC 60 947-1 Size 0.13…4 A3 0.08…2.5 A1 0.13…4 A3 0.13…4/0.08…2.5 A 3/A 1
Ordering data W Cat. No. Qty. W Cat. No. Qty. W Cat. No. Qty. W Cat. No. Qty.
Green/yellow Wemid 101620 100 101650 100 101000 100 101640 100
Support block1) Type Cat. No. Qty. Type Cat. No. Qty. Type Cat. No. Qty. Type Cat. No. Qty.
SH 2 049492 10 SH 2 049492 10 SH 2 049492 10 SH 2 049492 10
Marking tags Print
DEK Consecutive horizontal DEK 5 047346 500 DEK 5 047346 500 DEK 5 047346 500 DEK 5 047346 500
DEK Consecutive vertical DEK 5 047356 500 DEK 5 047356 500 DEK 5 047356 500 DEK 5 047356 500
WS Blank WS 12/5 160986 720 WS 12/5 160986 720 WS 12/5 160986 720 WS 12/5 160986 720
DEK WS WS Printed WS 12/5 144746 200 WS 12/5 144746 200 WS 12/5 144746 200 WS 12/5 144746 200
W W W W
Dimensions / Approvals a r i q GOST LR u DNV a r i q GOST LR u DNV a r i q GOST LR u DNV a r i GOST
Width/length/height (mm) with TS 35 x 7.5 W 5/60/64 8/60/47 10/60/47 12/60/47
Insulation stripping length/clamping screw/screwdriver blade 8 mm/M 3/3.5 x 0.6 12 mm/M 3.5/4.0 x 0.8 12 mm/M 4/5.5 x 1.0 12 mm/M 4/5.5 x 1.0
VDE rated data 0611, Part 3/IEC 60 947-7-2
Rated voltage/current for PEN/cross-section – V/- A/4 mm2 – V/– A/6 mm2 – V/57 A/10 mm2 – V/76 A/16 mm2
Rated voltage/impulse voltage/pollution severity adjacent terminal 800 V/8 kV/3 800 V/8 kV/3 800 V/8 kV/3 400 V/6 kV/3
Further technical data
Tightening torque range Nm 0.5...1.0 0.8...1.6/0.5...1.0** 1.2...2.4/0.5...1.0** 1.2...2.4/0.5...1.0**
Torque setting with DMS 2 electric screwdriver 2 3/2 3/2 –/4
Clampable conductor
Solid H07V-U mm2 0.5…6 0.5…6 1.5…16 1.5…16
Stranded H07V-R mm2 1.5…6 1.5…6 1.5…16 1.5…25
Flexible H07V-K mm2 0.5…4 0.5…10 1.5…16 1.5…16
Solid H07V-K and ferrules DIN 46 228/1 mm2 1.5…4 0.5…6 1.5…16 1.5…16
Flexible H07V-K and ferrules with plastic insul. collar mm2 1.5…4 0.5…6 1.5…16 1.5…16
AWG conductor Nr. 26…10 26…8 16…8 14…6
Max. clamping range in mm2, Gauge pin to IEC 60 947-1 Size 0.13…6 A3 0.5…10 A5 1.31…16 B6 1.5…25 B7
Ordering data W Cat. No. Qty. W Cat. No. Qty. W Cat. No. Qty. W Cat. No. Qty.
Grenn/yellow Wemid 104192 0000 100 101020 50 101030 50 3
101910 ) 50
with hexagon socket
Support block1) Type Cat. No. Qty. Type Cat. No. Qty. Type Cat. No. Qty. Type Cat. No. Qty.
SH 2 049492 10 SH 2 049492 10 SH 2 049492 10 SH 2 049492 10
Link2) External Internal
WQB-PEN 10 106030 10 WQV 16N-PEN 1071364) 10
Marking tags Print
DEK Consecutive horizontal DEK 5 047346 500 DEK 8 127696 500 DEK 8 127696 500 DEK 8 127696 500
DEK Consecutive vertical DEK 5 047356 500 DEK 8 128966 500 DEK 8 128966 500 DEK 8 128966 500
WS Blank WS 8/5 164074 720 WS 12/6.5 160992 540 WS 12/6.5 160992 540 WS 12/6.5 160992 540
DEK WS WS Printed WS 8/5 158008 200 WS 12/6.5 156895 100 WS 12/6.5 156895 100 WS 12/6.5 156895 100
Mounting rails, end brackets, further marking material see section “Accessories”
1
) For insulated arrangement of mounting rails in totally insulated 3) Yellow side open, see fitting note, page 1/4 ) Ferrules with optimum diam. for terminals with 5 mm pitch:
5
systems 4
) For PEN link in conjunction with WQV 16 N, connect neutral Cat. No. 133310
2
) Insertable link in a TN C distribution network between N terminal conductor between PE and phase. ) Using 35 mm2 with 5 Nm tightening torque
6
14
WDK 2.5 PE WDK 2.5 DU-PE*** WDK 2.5N DU-PE WDK 2.5N PE WPE 4 WDK 4N DU-PE
W-series
W W W W W W
a q GOST a q GOST a r i q GOST LR u DNV a r i q GOST LR u DNV a r i q GOST LR u DNV a r i q GOST LR u DNV
5/69/63 5/69/63 5/60/62 5/60/62 6/60/47 5/60/64
10 mm/M 2.5/3.5 x 0.6 10 mm/M 2.5/3.5 x 0.6 8 mm/M 2.5/3.5 x 0.6 8 mm/M 2.5/3.5 x 0.6 10 mm/M 3/3.5 x 0.6 8 mm/M 3/3.5 x 0.6
– V/– A/2.5 mm2 – V/– A/2.5 mm2 – V/– A/2.5 mm2 – V/– A/2.5 mm2 – V/– A/4 mm2 – V/– A/4 mm2
400 V/6 kV/3 400 V/6 kV/3 800 V/8 kV/3 800 V/8 kV/3 800 V/8 kV/3 800 V/8 kV/3
DEK 5 047346 500 DEK 5 047346 500 DEK 5 047346 500 DEK 5 047346 500 DEK 6 046866 500 DEK 5 047346 500
DEK 5 047356 500 DEK 5 047356 500 DEK 5 047356 500 DEK 5 047356 500 DEK 6 046876 500 DEK 5 047356 500
WS 8/5 164074 720 WS 8/5 164074 720 WS 8/5 164074 720 WS 8/5 164074 720 WS 12/6 160990 600 WS 8/5 164074 720
WS 8/5 158008 200 WS 8/5 158008 200 WS 8/5 158008 200 WS 8/5 158008 200 WS 12/6 144766 200 WS 8/5 158008 200
WPE 16 WPE 35N WPE 35 WPE 70N WPE 70/95 WPE 120
W W W W W
a r i q GOST LR u DNV a r GOST a r i q GOST LR u DNV a r GOST a r i GOST a r i GOST
12/60/63 16/66/51 16/60/63 20.5/75/86 27/132/108 32/132/118
16 mm/M 5/5.5 x 1.0 18 mm/M 6/5.5 x 1.0 18 mm/M 6/6.5 x 1.2 22 mm/M 8/S 6 DIN 6911 30 mm/M 8/S 6 DIN 6911 35 mm/M 10/S 6 DIN 6911
– V/76 A/16 mm2 – V/125 A/35 mm2 – V/125 A/35 mm2 – V/192 A/70 mm2 – V/232 A/95 mm2 – V/269 A/120 mm2
800 V/8 kV/3 400 V/6 kV/3 800 V/8 kV/3 1000 V/8 kV/3 1000 V/8 kV/3 1000 V/8 kV/3
DEK 8 127696 500 DEK 8 127696 500 DEK 8 127696 500 DEK 8 127696 500 DEK 5 047346 500 DEK 5 047346 500
DEK 8 128966 500 DEK 8 128966 500 DEK 8 128966 500 DEK 8 128966 500 DEK 5 047356 500 DEK 5 047356 500
WS 12/6.5 160992 540 WS 12/6.5 160992 540 WS 12/6.5 160992 540 WS 12/6.5 160992 540 WS 12/6.5 160992 540 WS 12/6.5 160992 540
WS 12/6.5 156895 100 WS 12/6.5 156895 100 WS 12/6.5 156895 100 WS 12/6.5 156895 100 WS 12/6.5 156895 100 WS 12/6.5 156895 100
15
Isolating neutral terminal blocks WNT 2.5 WNT 4 WNT 6 WNT 10
W W W W
Max. technical data 32 A/4 mm2 41 A/6 mm2 57 A/10 mm2 76A/16 mm2
Dimensions / Approvals a r i q GOST LR u DNV a r i q GOST LR u DNV a r i q GOST LR u DNV a r i q GOST LR u DNV
Width/length/height (mm) with TS 35 x 7.5 W 5/60/47 6/60/47 8/60/47 10/60/47
Insulation stripping length/clamping screw/screwdriver blade 10 mm/M 2.5/3.5 x 0.6 10 mm/M 3/3.5 x 0.6 12 mm/M 3.5/4.0 x 0.8 12 mm/M 4/5.5 x 1.0
VDE rated data 0611, Part 5/5.84
Rated voltage/rated current/rated cross-section 400 V/24 A/2.5 mm2 400 V/32 A/4 mm2 400 V/41 A/6 mm2 400 V/57 A/10 mm2
Rated voltage/impulse voltage/pollution severity 400 V/6 kV/3 400 V/6 kV/3 400 V/6 kV/3 400 V/6 kV/3
Further technical data
Tightening torque range Nm 0.4...0.8 / 0.4…0.8 0.5...1.0 / 0.4…0.8 0.8...1.6 / 0.8…1.6 1.2...2.4 / 0.8…1.6
Torque setting with DMS 2 electric screwdriver 1 2 3 4
Clampable conductor
Solid H07V-U mm2 0.5…4 0.5…6 0.5…10 1.5…16
Stranded H07V-R mm2 1.5…4 1.5…6 1.5…10 1.5…16
Flexible H07V-K mm2 0.5…4 0.5…6 0.5…10 1.5…16
Flexible H07V-K and ferrule according to DIN 46 228/1 mm2 0.5…2.5 0.5…4 0.5…6 1.5…16
Flexible H07V-K and ferrules with plastic insul. collar mm2 0.5…2.51) 0.5…4 0.5…6 1.5…16
Max. clamping range in mm2, Gauge pin to IEC 60 947-1 Size 0.13…4 A3 0.13…6 A4 0.5…10 A5 1.31…16 B6
Continuous current rating of cross-connection 2-pole A
Continuous current rating of cross-connection multipole A
UL/CSA rated data
Voltage/current/conductor size UL 600 V/25 A/22…12 AWG 600 V/35 A/22…10 AWG 600 V/45 A/20…8 AWG 600 V/60 A/16…8 AWG
Voltage/current/conductor size CSA 600 V/20 A/26…12 AWG 600 V/35 A/26…10 AWG 600 V/45 A/20…8 AWG 600 V/65 A/16…6 AWG
Ordering data Version W Cat. No. Qty. W Cat. No. Qty. W Cat. No. Qty. W Cat. No. Qty.
For 10 x 3 busbars Blue Wemid 101068 100 101078 100 101088 50 101098 50
For 10 x 3 busbars as equipotential bonding disconnec- 101060 100 101070 100 101080 50 101090 50
tor Beige Wemid
(VDE 0107)
Type Cat. No. Qty. Type Cat. No. Qty. Type Cat. No. Qty. Type Cat. No. Qty.
End plate WAP 2.5-10 105008 50 WAP 2.5-10 105008 50 WAP 2.5-10 105008 50 WAP 2.5-10 105008 50
Thickness 1.5 mm Blue Wemid WAP 2.5-10 105000 50 WAP 2.5-10 105000 50 WAP 2.5-10 105000 50 WAP 2.5-10 105000 50
Beige Wemid
Support plate WHP 2.5-10 105028 20 WHP 2.5-10 105028 20 WHP 2.5-10 105028 20 WHP 2.5-10 105028 20
for SSch 10 x 3 Blue Wemid WHP 2.5-10 105020 20 WHP 2.5-10 105020 20 WHP 2.5-10 105020 20 WHP 2.5-10 105020 20
Beige Wemid
Thickness 1.5 mm
Distance WHP-WHP max. 200 mm
Busbar 10 x 3
Topface busbar till topface TS 35 = 25.5 mm SSch 10 x 3 Cu 034890 1m SSch 10 x 3 Cu 034890 1m SSch 10 x 3 Cu 034890 1m SSch 10 x 3 Cu 034890 1m
Cu 140 A
Test plug PS 2.3 018040 20 PS 2.3 018040 20 PS 2.3 018040 20 PS 2.3 018040 20
End bracket WEW 35 / 2 106120 50 WEW 35 / 2 106120 50 WEW 35 / 2 106120 50 WEW 35 / 2 106120 50
16
WNT 16 N WNT 35 N WNT 70 N
W-series
-/-
W -/-
W W
207 A/95 mm2
a
12/60/47 16/66/51 20.5/75/86
12 mm/M 4/5.5 x 1.0 18mm/M 6/5.5 x 1.0 22 mm/M 8/S 6 DIN 6911
400 V/76 A/16 mm2 400 V/125 A/35 mm2 400 V/192 A/70 mm2
400 V/6 kV/3 400 V/6 kV/3 400 V/6 kV/3
Type Cat. No. Qty. Type Cat. No. Qty. Type Cat. No. Qty.
TN-S-System
17
Three-way terminal blocks Terminal/Accessories WDL 2.5/S/ WDL 2.5/S/
for N-busbar 10 x 3 NT/L/PE L/L
W W
Installation specifications for power Max. technical data 32 A/4 mm2 32 A/4 mm2
systems up to 1000 V to VDE 0100 (IEC Dimensions / Approvals a r q GOST a r q GOST
Width/length/height (mm) with TS 35 x 7.5 W 6/84.5/48.7 6/84.5/48.7
364) require that the installed system be
Insulation stripping length/clamping screw/screwdriver blade 8 mm/M 2.5/3.5 x 0.6 8 mm/M 2.5/3.5 x 0.6
subjected to an insulation measurement
Rated data VDE 0611 Teil 4 IEC 60 947-7-1
test. Special specifications stipulate an Rated voltage/rated current/rated cross-section 250V/400V/24 A/2.5 mm2 400 V/24 A/2.5 mm2
insulation measurement for all outgoing Rated voltage/impulse voltage/pollution severity 250V/400 V/4 kV/3 400 V/6 kV/3
conductores (L 1, L 2, L 3, N) without Further technical data
making any disconnections. The WDL Tightening torque range Nm 0.4...0.6 0.4...0.6
three-way terminal block meets these Torque setting with DMS 2 electric screwdriver 1 1
requirements. Circuits can be connected Clampable conductor
on three levels across a width of only 6 Solid H07V-U mm2 0.5…4 0.5…4
Stranded H07V-R mm2 1.5…4 1.5…4
mm in a clear and space-saving manner.
Flexible H07V-K mm2 0.5…4 0.5…4
Two independent terminals strips with dis-
Flexible H07V-K and ferrule according to DIN 46 228/1 mm2 0.25…4 0.25…4
connect elements and a cross-connection Flexible H07V-K and ferrule with plastic insul. collar mm2 0.25…4 0.25…4
system of the N conductor are available: Max. clamping range in mm2, Gauge pin to IEC 60 947-1 Size 0.13…4 A3 0.13…4 A3
Continuous current rating of cross-connection Q, multipole A 24 24
UL/CSA rated data
WDL 2.5/S… Voltage/current/conductor size UL 300 V/15 A/22…12 AWG 300 V/15 A/22…12 AWG
Voltage/current/conductor size CSA 300 V/10 A/26…12 AWG 300 V/10 A/26…12 AWG
N cross-connection with the proven 10 x 3 Ordering data Version W Cat. No. Qty. W Cat. No. Qty.
mm busbar system up to 140 A. The bus- for TS 35 / Beige Wemid 103060 50 103120 50
bar is fed by a separate clamping yoke (NT connection coded blue)
(ZB 4-ZB 16) or an N disconnect terminal
of the WNT series.
End plate Type Cat. No. Qty. Type Cat. No. Qty.
Clamping yoke
supply for 10 x 3 busbar ZB 35 K 050268 50
16...50 mm2 stranded
16...35 mm2 flexible
Gauge pin to B9
Neutral (N) disconnect terminals
as supply terminals WNT 10 101098 50
WNT 16 N 101900 50
WNT 70 N 951221 10
End bracket
WEW 35 / 2 106120 50 WEW 35 / 2 106120 50
Marking tags Print
DEK Consecutive horizontal DEK 6 046866 500 DEK 6 046866 500
DEK Consecutive vertical DEK 6 046876 500 DEK 6 046876 500
WS Blank WS 8/5 164074 720 WS 8/5 164074 720
DEK WS WS Printed WS 8/5 158008 200 WS 8/5 158008 200
Mounting rails, end brackets, further marking material see section “Accessories”
18
WDL 2.5/S-Blöcke WDL 2.5/S/N WDL 2.5/S/L WDL 2.5/S/ WDL 2.5/S/ WDL 2.5/S/
for one three-phase circuit N/L N/L/PE L/L/PE
W-series
for three AC circuits
W W W W W
32 A/4 mm2 32 A/4 mm2 32 A/4 mm2 32 A/4 mm2 32 A/4 mm2 32 A/4 mm2
a r q GOST a r q GOST a r q GOST a r q GOST a r q GOST a r q GOST
12/18/84.5/48.7 6/84.5/48.7 6/84.5/48.7 6/84.5/48.7 6/84.5/48.7 6/84.5/48.7
8 mm/M 2.5/3.5 x 0.6 8 mm/M 2.5/3.5 x 0.6 8 mm/M 2.5/3.5 x 0.6 8 mm/M 2.5/3.5 x 0.6 8 mm/M 2.5/3.5 x 0.6 8 mm/M 2.5/3.5 x 0.6
IEC 60 947-7-1 IEC 60 947-7-1 IEC 60 947-7-1
250V/400V/24 A/2.5 mm2 400 V/24 A/2.5 mm2 400 V/24 A/2.5 mm2 400 V/24 A/2.5 mm2 250V/400V/24 A/2.5 mm2 250V/400V/24 A/2.5 mm2
250V/400V/4 kV/3 400 V/6 kV/3 400 V/6 kV/3 400 V/6 kV/3 250V/400 V/4 kV/3 250V/400 V/4 kV/3
300 V/15 A/22…12 AWG 300 V/15 A/22…12 AWG 300 V/15 A/22…12 AWG 300 V/15 A/22…12 AWG 300 V/15 A/22…12 AWG 300 V/15 A/22…12 AWG
300 V/10 A/26…12 AWG 300 V/10 A/26…12 AWG 300 V/10 A/26…12 AWG 300 V/10 A/26…12 AWG 300 V/10 A/26…12 AWG 300 V/10 A/26…12 AWG
W Cat. No. Qty. W Cat. No. Qty. W Cat. No. Qty. W Cat. No. Qty. W Cat. No. Qty. W Cat. No. Qty.
103410 25 103090 50 103130 50 103080 50 103070 50 103110 50
Block of each 103060+103120 (NT connection coded blue) (NT connection coded blue) (NT connection coded blue)
103420 20
Block of three 103060
Type Cat. No. Qty. Type Cat. No. Qty. Type Cat. No. Qty. Type Cat. No. Qty. Type Cat. No. Qty. Type Cat. No. Qty.
WAP WDL 2.5/S 106770 20 WAP WDL 2.5/S 106770 20 WAP WDL 2.5/S 106770 20 WAP WDL 2.5/S 106770 20 WAP WDL 2.5/S 106770 20 WAP WDL 2.5/S 106770 20
TSch 1 031916 100 TSch 1 031916 100 TSch 1 031916 100 TSch 1 031916 100 TSch 1 031916 100 TSch 1 031916 100
SSch 10 x 3 Cu 034890 1m
ZB 35 K 050268 50
WNT 10 101098 50
WNT 16 N 101900 50
WNT 70 N 951221 10
WEW 35 / 2 106120 50 WEW 35 / 2 106120 50 WEW 35 / 2 106120 50 WEW 35 / 2 106120 50 WEW 35 / 2 106120 50 WEW 35 / 2 106120 50
DEK 6 046866 500 DEK 6 046866 500 DEK 6 046866 500 DEK 6 046866 500 DEK 6 046866 500 DEK 6 046866 500
DEK 6 046876 500 DEK 6 046876 500 DEK 6 046876 500 DEK 6 046876 500 DEK 6 046876 500 DEK 6 046876 500
WS 8/5 164074 720 WS 8/5 164074 720 WS 8/5 164074 720 WS 8/5 164074 720 WS 8/5 164074 720 WS 8/5 164074 720
WS 8/5 158008 200 WS 8/5 158008 200 WS 8/5 158008 200 WS 8/5 158008 200 WS 8/5 158008 200 WS 8/5 158008 200
19
Three-way terminal blocks Terminal/accessories WDL 2.5/NT/L/PE WDL 2.5/L/L
with N-cross-connection WQV
W W
Installation specification for power systems Max. technical data 29 A/4 mm2 31 A/4 mm2
up to 1000 V to VDE 0100 (IEC 364) Dimensions / Approvals a r q GOST a r q GOST
Width/length/height (mm) with TS 35 x 7.5 W 6/90/48.7
require that the installed system be sub- 6/90/48.7
Insulation stripping length/clamping screw/screwdriver blade 8 mm/M 2.5/3**/3.5 x 0.6 8 mm/M 2.5/3**/3.5 x 0.6
jected to an insulation measurement test.
Special specifications stipulate an insulati- Ratings VDE 0611 Teil 4 IEC 60 947-7-1
on measurement for all outgoing conduc- Rated voltage/rated current/rated cross-section 250V/400V/24 A/2.5/4** mm2 400 V/24 A/2.5/4** mm2
tors (L 1, L 2, L 3, N) without making any Rated voltage/impulse voltage/pollution severity 250V/400 V/4 kV/3 400 V/6 kV/3
disconnections. The WDL three-way termi-
nal block meets these requirements. Cir- Further technical data
cuits can be connected on three levels Tightening torque range Nm 0.5...0.6 0.5...0.6
across a width of only 6 mm in a clear and Torque setting with DMS 2 electric screwdriver 1 1
Clampable conductor
space-saving manner. Two independent
Solid H07V-U mm2 0.5…4/6** 0.5…4/6**
terminals strips with disconnect elements Stranded H07V-R mm2 1.5…4/6** 1.5…4/6**
and a cross-connection sytem of the N Flexible H07V-K mm2 0.5…4/6** 0.5…4/6**
conductor are available. Flexible H07V-K and ferrule according to DIN 46 228/1 mm2 0.5…4/4** 0.5…4/4**
Flexible H07V-K and ferrules with plastic insul. collar mm2 0.5…4/4** 0.5…4/4**
Max. clamping range in mm2, Gauge pin to IEC 60 947-1 Size 0.13…4 A 3/A 4** A 3/A 4**
WDL 2.5… Continuous current rating of cross-connection Q, multipole A 24 24
Continuous current rating of cross-connection WQV 4 multipole A 29 (Center supply 40A) 31
N cross-connection via the WQV 4 cross- UL/CSA rated data
connection system form the W series. The Voltage/current/conductor size UL 300 V/15 A/22…12 AWG 300 V/15 A/22…12 AWG
supply power is fed directly via a clamping Voltage/current/conductor size CSA 300 V/10 A/26…12 AWG 300 V/10 A/26…12 AWG
yoke in the terminal. Ordering data Version W Cat. No. Qty. W Cat. No. Qty.
for TS 35 / Beige Wemid 102980 50 103030 50
(NT-connection coded blue)
WDL 2.5/L/L
Three-phase circuits can be implemented End plate Type Cat. No. Qty. Type Cat. No. Qty.
by combining three-way terminals (L 1, N,
PE) and WDL 2.5/L/L two-way terminals WAP WDL 2.5 106780 20 WAP WDL 2.5 106780 20
(L 2, L 3).
Cross-connection (L/NT/N)
Q2 107150 50 Q2 107150 50
Q3 107160 50 Q3 107160 50
Q4 107170 50 Q4 107170 50
Q 10 107180 20 Q 10 107180 20
Q 20 107420 20 Q 20 107420 20
Cross-connection* Input (L, NT, N)
WQV 4/2 105196 50 WQV 4/2 105196 50
WQV 4/3 105456 50 WQV 4/3 105456 50
WQV 4/4 105466 50 WQV 4/4 105466 50
WQV 4/10 105206 20 WQV 4/10 105206 20
Notching tool for WQV
WAW 1 900450 1 WAW 1 900450 1
End bracket
WEW 35 / 2 106120 50 WEW 35 / 2 106120 50
Marking tags Print
DEK Consecutive horizontal DEK 6 046866 500 DEK 6 046866 500
DEK Consecutive vertical DEK 6 046876 500 DEK 6 046876 500
WS Blank WS 8/5 164074 720 WS 8/5 164074 720
DEK WS WS Printed WS 8/5 158008 200 WS 8/5 158008 200
Mouting rails, end brackets, further marking material see section “Accessories”
** Cross-connection WQV 4
** Connection 4/6 mm2 / A4
20
WDL 2.5/N WDL 2.5/L WDL 2.5/N/L WDL 2.5/N/L/PE WDL 2.5/L/L/PE
W-series
W W W W W
32 A/4 mm2 32 A/4 mm2 31 A/4 mm2 31 A/4 mm2 31 A/4 mm2
a r q GOST a r q GOST a r q GOST a r q GOST a r q GOST
6/90/48.7 6/90/48.7 6/90/48.7 6/90/48.7 6/90/48.7
8 mm/M 2.5/3**/3.5 x 0.6 8 mm/M 2.5/3**/3.5 x 0.6 8 mm/M 2.5/3**/3.5 x 0.6 8 mm/M 2.5/3**/3.5 x 0.6 8 mm/M 2.5/3**/3.5 x 0.6
300 V/15 A/22…12 AWG 300 V/15 A/22…12 AWG 300 V/15 A/22…12 AWG 300 V/15 A/22…12 AWG 300 V/15 A/22…12 AWG
300 V/10 A/26…12 AWG 300 V/10 A/26…12 AWG 300 V/10 A/26…12 AWG 300 V/10 A/26…12 AWG 300 V/10 A/26…12 AWG
W Cat. No. Qty. W Cat. No. Qty. W Cat. No. Qty. W Cat. No. Qty. W Cat. No. Qty.
103010 50 103040 50 103000 50 102990 50 103020 50
(N-connection coded blue) (N-connection coded blue) (N-connection coded blue)
Type Cat. No. Qty. Type Cat. No. Qty. Type Cat. No. Qty. Type Cat. No. Qty. Type Cat. No. Qty.
WAP WDL 2.5 106780 20 WAP WDL 2.5 106780 20 WAP WDL 2.5 106780 20 WAP WDL 2.5 106780 20 WAP WDL 2.5 106780 20
TSch 1 031916 100 TSch 1 031916 100 TSch 1 031916 100 TSch 1 031916 100 TSch 1 031916 100
WQV 4/2 105196 50 WQV 4/2 105196 50 WQV 4/2 105196 50 WQV 4/2 105196 50 WQV 4/2 105196 50
WQV 4/3 105456 50 WQV 4/3 105456 50 WQV 4/3 105456 50 WQV 4/3 105456 50 WQV 4/3 105456 50
WQV 4/4 105466 50 WQV 4/4 105466 50 WQV 4/4 105466 50 WQV 4/4 105466 50 WQV 4/4 105466 50
WQV 4/10 105206 20 WQV 4/10 105206 20 WQV 4/10 105206 20 WQV 4/10 105206 20 WQV 4/10 105206 20
WAW 1 900450 1 WAW 1 900450 1 WAW 1 900450 1 WAW 1 900450 1 WAW 1 900450 1
WEW 35 / 2 106120 50 WEW 35 / 2 106120 50 WEW 35 / 2 106120 50 WEW 35 / 2 106120 50 WEW 35 / 2 106120 50
DEK 6 046866 500 DEK 6 046866 500 DEK 6 046866 500 DEK 6 046866 500 DEK 6 046866 500
DEK 6 046876 500 DEK 6 046876 500 DEK 6 046876 500 DEK 6 046876 500 DEK 6 046876 500
WS 8/5 164074 720 WS 8/5 164074 720 WS 8/5 164074 720 WS 8/5 164074 720 WS 8/5 164074 720
WS 8/5 158008 200 WS 8/5 158008 200 WS 8/5 158008 200 WS 8/5 158008 200 WS 8/5 158008 200
21
Disconnect test terminal blocks WTR 2.5 WTR 2.5 WTR 2.5 D WTR 2.5 D
without disconnector with diode plug with StB
with diode plug and
2.3 socket
W W W W
Max. technical data 16 A / 2.5 mm2 16 A / 2.5 mm2 16 A / 2.5 mm2 16 A / 2.5 mm2
Dimensions / Approvals a r i q GOST LR u DNV a r i q GOST LR u DNV a r q GOST a r q GOST
Width/length/height (mm) with TS 35 x 7.5 W 5/60/49 5/60/49 5/60/49 + 18 für WSD 5/60/49 + 18 für WSD
Insulation stripping length/clamping screw/screwdriver blade 10 mm/M 2.5/3**/3.5 x 0.6 10 mm/M 2.5/3**/3.5 x 0.6 10 mm/M 2.5/3.5 x 0.6 10 mm/M 3/3.5 x 0.6
Rated data
Rated voltage/rated current/rated cross-section 8002) V/16* A/2.5 mm2 800 V/16* A/2.5 mm2 500 V/16* A/2.5 mm2 8002) V/16* A/2.5 mm2
Rated impulse voltage VDE 0110/1.89 /pollution severity 8 kV/3 8 kV/3 6 kV/3 6 kV/3
Further technical data
Tightening torque range Nm 0.4...0.6 / 0.5...0.6** 0.4...0.6 / 0.5...0.6** 0.4...0.6 0.4...0.6 / 0.5...0.6**
Torque setting with DMS 2 electric screwdriver 1/2** 1/2** 1 2
Clampable conductor
Solid H07V-U mm2 0.5…4 0.5…4 0.5…4 0.5…4
Stranded H07V-R mm2 1.5…4 1.5…4 1.5…4 1.5…4
Flexible H07V-K mm2 0.5…2.5 0.5…2.5 0.5…2.5 0.5…2.5
Flexible H07V-K and ferrule according to DIN 46 228/1 mm2 0.5…2.5 0.5…2.5 0.5…2.5 0.5…2.5
Flexible H07V-K and ferrules with plastic insul. collar mm2 0.5…2.51) 0.5…2.51) 0.5…2.51) 0.5…2.51)
Max. clamping range in mm2, Gauge pin to IEC 60 947-1 Size 0.13…4 A3 0.13…4 A3 0.13…4 A3 0.13…4 A3
Continuous current rating of cross-connection 2-pole A
Continuous current rating of cross-connection multipole A 26 26 26 26
UL/CSA rated data
Voltage/current/conductor size UL 300 V/10 A/22…12 AWG 300 V/10 A/22…12 AWG 300 V/10 A/22…12 AWG 300 V/10 A/22…12 AWG
Voltage/current/conductor size CSA 300 V/10 A/26…12 AWG 300 V/10 A/26…12 AWG 300 V/10 A/26…12 AWG 300 V/10 A/26…12 AWG
Ordering data Version W Cat. No. Qty. W Cat. No. Qty. W Cat. No. Qty. W Cat. No. Qty.
Beige Wemid without StB 101110 100 101290 100 ) 101350 50 ) 101320 50
Beige Wemid 2 StB 2.3 101120 100 with StB 2.3 101280 100 ( 101360 50 ( 101330 50
Blue Wemid without StB 101118 100
Blue Wemid 2 StB 2.3 101128 100
Beige Wemid 2 StB 2.0 101300 100 with StB 2.0 101310 100 with wire link 101370 50 with wire link 101340 50
Orange PA 101116 100
End plate/partition Type Cat. No. Qty. Type Cat. No. Qty. Type Cat. No. Qty. Type Cat. No. Qty.
WAP (Thickness 1.5 mm)
WTW Beige Wemid WAP 2.5–10 105000 50 WAP 2.5–10 105000 50 WAP 2.5–10 105000 50 WAP 2.5–10 105000 50
Blue Wemid WAP 2.5–10 BL 105008 50 WAP 2.5–10 BL 105008 50 WAP 2.5–10 BL 105008 50 WAP 2.5–10 BL 105008 50
WAP Beige Wemid WTW 2.5–10 105010 20 WTW 2.5–10 105010 20 WTW 2.5–10 105010 20 WTW 2.5–10 105010 20
Cross-connection
QL 2–10 QL 2 021580 100 QL 2 021580 100 QL 2 021580 100 QL 2 021580 100
QL 3 021590 100 QL 3 021590 100 QL 3 021590 100 QL 3 021590 100
QL 4 021600 50 QL 4 021600 50 QL 4 021600 50 QL 4 021600 50
QL 10 033800 20 QL 10 033800 20 QL 10 033800 20 QL 10 033800 20
BS-M 2.5x4.5 106270 100 BS-M 2.5x4.5 106270 100 BS-M 2.5x4.5 106270 100 BS-M 2.5x4.5 106270 100
PS PS 2.3 (ø 2.3) 018040 20 PS 2.3 (ø 2.3) 018040 20 PS 2.3 (ø 2.3) 018040 20 PS 2.3 (ø 2.3) 018040 20
PS 2.0 (ø 2.0) 029380 20 PS 2.0 (ø 2.0) 029380 20 PS 2.0 (ø 2.0) 029380 20 PS 2.0 (ø 2.0) 029380 20
WDS 2 106990 20
Cross-connection plug
(2-pole, ø 2.3) VQB WQB B/24 157906 20 WQB B/24 157906 20 WQB B/24 157906 20 WQB B/24 157906 20
Notching tool
To notch the punch-out in the terminal moulding WAW 2 900451 1 WAW 2 900451 1 WAW 2 900451 1 WAW 2 900451 1
Screwdriver
SDIZ SDIZ 900845 1 SDIZ 900845 1 SDIZ 900845 1 SDIZ 900845 1
Fuse holder for 5 x 20 SIHA without LED with LED Qty. without LED with LED Qty. without LED with LED Qty. without LED with LED Qty.
SIHA 1/G 20 400 V 953755 25 953755 25 953755 25 953755 25
SIHA 1/G 20 10-36 V 953756 25 953756 25 953756 25 953756 25
SIHA 1/G 20 35-70 V 953757 25 953757 25 953757 25 953757 25
SIHA 1/G 20 60-150 V 953758 25 953758 25 953758 25 953758 25
SIHA 1/G 20 140-250 V 953759 25 953759 25 953759 25 953759 25
Diode plug (spare)
( WSD 2.5 105846 25 WSD 2.5 105846 25 WSD 2.5 105846 25 WSD 2.5 105846 25
) WSD 2.5 105856 25 WSD 2.5 105856 25 WSD 2.5 105856 25 WSD 2.5 105856 25
With wire link WSD 2.5 105866 25 WSD 2.5 105866 25 WSD 2.5 105866 25 WSD 2.5 105866 25
Without special components WSD 2.5 105876 25 WSD 2.5 105876 25 WSD 2.5 105876 25 WSD 2.5 105876 25
Marking tags Print
DEK Concecutive horizontal DEK 5 047346 500 DEK 5 047346 500 DEK 5 047346 500 DEK 5 047346 500
DEK Consecutive vertical DEK 5 047356 500 DEK 5 047356 500 DEK 5 047356 500 DEK 5 047356 500
WS Blank
WS 12/5 160986 720 WS 12/5 160986 720 WS 12/5 160986 720 WS 12/5 160986 720
DEK WS WS Printed
WS 12/5 144746 200 WS 12/5 144746 200 WS 12/5 144746 200 WS 12/5 144746 200
Mounting rails, end brackets, further marking material see section “Accessories”
) Ferrules with optimum diam. for terminals with 5 mm pitch: Cat. No. 133310
1
* Rated current is limited to 1 A when using the diode plug with soldered diode
) as disconnect test terminal 500 V
2
** For test socket
22
WTR 4 WTR 2.5/ZZ WDTR 2.5 WDTR 2.5/WE WDL 2.5TR-DU-PE WDL 2.5TR-DU
W-series
V V
ZQ ZQ
W W W W
5) 4) 5) 4)
W W
24 A / 2.5 mm2 14 A/1.5 mm2 10 A/1.5 mm2 10 A/1.5 mm2 29 A/4 mm2 31 A/4 mm2
400 V/24 A/4 mm2 400 V/14* A/2.5 mm2 400 V/13* A/2.5 mm2 400 V/10* A/2.5 mm2 250 V / 24 A / 2.5/ 4** mm2 250 V / 24 A / 2.5/ 4** mm2
6 kV/3 6 kV/3 4 kV/3 4 kV/3 250 V / 4 kV / 3 250 V / 4 kV / 3
Approvals pending
Approvals pending
W Cat. No. Qty. W Cat. No. Qty. W Cat. No. Qty. W Cat. No. Qty. W Cat. No. Qty. W Cat. No. Qty.
with StB 791021 0000 50 102981 50 102982 50
without StB791018 0000 50 2 StB 2.3** 103990 100 952807 25 952809 25
with StB 791022 0000 50
without StB 791019 0000 50 2 StB 2.3** 103998 100 952808 25 952810 25
Type Cat. No. Qty. Type Cat. No. Qty. Type Cat. No. Qty. Type Cat. No. Qty. Type Cat. No. Qty. Type Cat. No. Qty.
WAP 2.5–10 105000 50 WAP WTR2.5/ZZ 107460 20 WAP WDL 2.5 106780 20 WAP WDL 2.5 106780 20
WAP 2.5–10 BL 105008 50 WAP WTR2.5/ZZ 107468 20
ZQV 4N/2 175825 60 ZQV 2.5/2 160886 60 VQB 1.5 / 50 BL 163328 5 VQB 1.5 / 50 BL 163328 5 Q 2 107150 50 Q 2 107150 50
ZQV 4N/3 176263 60 ZQV 2.5/3 160887 60 VQB 1.5 / 50 RT 163329 5 VQB 1.5 / 50 RT 163329 5 Q 3 107160 50 Q 3 107160 50
ZQV 4N/4 176262 60 ZQV 2.5/4 160888 60 VQB 1.5 / 50 SW 163512 5 VQB 1.5 / 50 SW 163512 5 Q 4 107170 50 Q 4 107170 50
ZQV 4N/10 175826 20 ZQV 2.5/5 160889 20 Q 10 107180 20 Q 10 107180 20
ZQV 4N/41 175827 10 ZQV 2.5/6 160890 20 Q 20 107420 20 Q 20 107420 20
QB75/6.2/15 053520 10 ZQV 2.5/7 160891 20
ISPF QB75 SW 052670 10 ZQV 2.5/8 160892 20 WQV 4/2 105196 50 WQV 4/2 105196 50
ISPF QB75 BL 052678 10 ZQV 2.5/9 160893 20 WQV 4/3 105456 50 WQV 4/3 105456 50
ISPF QB75 RT 052676 10 ZQV 2.5/10 160894 20 WQV 4/4 105466 50 WQV 4/4 105466 50
PS 2.3 (ø 2.3) 018040 20 PS 2.3 (ø 2.3) 018040 20 PS 2.3 (ø 2.3) 018040 20 PS 2.3 (ø 2.3) 018040 20 WQV 4/10 105206 20 WQV 4/10 105206 20
SIHA2/G206) Cat. No. Qty. without LED3) with LED3) Qty. without LED3) with LED3) Qty.
250 AC/DC 953760 25 953755 25 953755 25
10...36 AC/DC 953761 25 953756 25 953756 25
35...70 AC/DC 953762 25 953757 25 953757 25
60...150 AC/DC 953763 25 953758 25 953758 25
140...250 AC/DC 953764 25 953759 25 953759 25
DEK 6 046866 500 DEK 5 047346 500 DEK 6.5 046816 – DEK 6.5 046816 500 DEK 6 046866 500 DEK 6 046866 500
DEK 6 046876 500 DEK 5 047356 500 DEK 6.5 046826 – DEK 6.5 046826 500 DEK 6 046876 500 DEK 6 046876 500
WS 12/6 160990 600 WS 8/5 164074 720 WS 12/6 160990 600 WS 12/6 160990 600 WS 8/5 164074 720 WS 8/5 164074 720
WS 12/6 144766 200 WS 8/5 158008 200 WS 12/6 144766 200 WS 12/6 144766 200 WS 8/5 158008 200 WS 8/5 158008 200
23
Disconnect test terminal blocks SAKC 4/35
Q 25 blank 013400 20
PS
Cross-connection plug
(2-pole, ø 2.3) VQB PS 2.3 (ø 2.3) 018040 20
Notching tool
To notch the punch-out in the terminal moulding
Screwdriver
SDIZ
24
Disconnect test terminal blocks WDT 1.5/1 WDT 1.5/2 WDT 1.5/3
with space-saving TOP- with space-saving TOP- with space-saving TOP-
W-series
connection connection connection
W W W
W
Marking tags Print
DEK Consecutive horizontal DEK 6.5 046816 500 DEK 6.5 046816 500 DEK 6.5 046816 500
DEK Consecutive vertical DEK 6.5 046826 500 DEK 6.5 046826 500 DEK 6.5 046826 500
WS blank WS 8/5 164074 720 WS 8/5 164074 720 WS 8/5 164074 720
DEK WS WS printed WS 8/5 158008 200 WS 8/5 158008 200 WS 8/5 158008 200
Mounting rails, end brackets further marking materials see section “Accessories”
25
Fuse terminal blocks WTR 2.5/SI WTR 4/SI
with fuse holder*
for G fuse cartridges 5 x 20
V
ZQ
Note:
With blown fuse the follow on
circuit is still under current.
Disconnect lever to open circuit.
W W
Max. technical data 6.3 A/- 6.3 A/-
Dimensions/Approvals
Width/length/height (mm) with TS 35 x 7.5 W 5/60/83 6/60/82
Insulation stripping length/clamping screw/screwdriver blade 10 mm/M 2.5/3.5 x 0.6 13 mm/M 3/3.5 x 0.6
Rated data terminal base
Rated voltage/rated current/rated cross-section 400 V/6.3 A1)/2.5 mm2 400 V/6.3 A1)/4 mm2
Rated impulse voltage VDE 0100/1.89/pollution severity 6 kV/3 6 kV/3
Further technical data
Tightening torque range Nm 0.4…0.8 0.5…1.0
Torque setting with DMS 2 electric screwdriver 1/2 2
Clampable conductor
Solid H07V-U mm2 0.5…4 1…6
Stranded H07V-R mm2 1.5…4 1.5…6
Flexible H07V-K mm2 0.5…2.5 1…4
Flexible H07V-K and ferrule according to DIN 46 228/1 mm2 0.5…2.5 1…4
Flexible H07V-K and ferrules with plastic insul. collar mm2 0.5…2.5 1…4
Max. clamping range in mm2, Gauge pin to IEC 60 947-1 Size 0.13…4 A3 1…6 A4
Continuous current rating of cross-connection 2-pole A 32
Continuous current rating of cross-connection multipole A 26 32
UL/CSA rated data
Voltage/current/conductor size UL
Voltage/current/conductor size CSA
Ordering data Version W Cat. No. Qty. W Cat. No. Qty.
Beige Wemid 400 V 176394 25 WTR 4 SI 791024 0000 25
Beige Wemid/LED 10-36 V 176395 25 10-36 V 791437 0000 25
Beige Wemid/LED 35-70 V 176396 25 35-70 V 791438 0000 25
Beige Wemid/LED 60-150 V 176397 25 60-150 V 791439 0000 25
Beige Wemid/LED 140-250 V 176398 25 140-250 V 791440 0000 25
Partition/End plate Type Cat. No. Qty. Type Cat. No. Qty.
WTW WAP WAP 2.5-10 105000 50 WAP 2.5-10 105000 50
WAP 2.5-10 BL 105008 50 WAP 2.5-10 BL 105008 50
Thickness 1.5 mm Thickness 1.5 mm WTW 2.5-10 105010 20 WTW 2.5-10 105010 20
Cross-connection
QL 2 021580 100 ZQV 4N/2 175825 60
QL 3 021590 100 ZQV 4N/3 176263 60
QL 4 021600 50 ZQV 4N/4 176262 60
QL 10 033800 20 ZQV 4N/10 175826 60
BS-M 3x5 105210 100 ZQV 4N/41 175827 60
WQB B 24 157906 20 QB 75/6.2/15 053520 20
ISPF QB75 SW 052670 20
ISPF QB75 BL 052678 20
ISPF QB75 RT 052676 20
Notching tool for QL WAW 2 WAW 2 900451 1
G fuse cartridges 5 x 20 mm 2)
to DIN 41 660 IEC 127 BL 1 Rated current (A): 0.10 rapid blow 043030 10 043030 10
Rated voltage 250 V 0.20 rapid blow 043040 10 043040 10
Switching capacity 1500 A 0.25 rapid blow 043050 10 043050 10
(at 250 V, 50 Hz, cos ! = 0.7) 0.50 rapid blow 043060 10 043060 10
1.0 rapid blow 043070 10 043070 10
1.6 rapid blow 043080 10 043080 10
2.0 rapid blow 043090 10 043090 10
2.5 rapid blow 043100 10 043100 10
G fuse cartridges 5 x 30 mm 3.15 rapid blow 043110 10 043110 10
(500 V~/0.032…6.3 A). 4.0 rapid blow 043120 10 043120 10
Available from Fa. Wickmann-Werke GmbH, 5.0 rapid blow 043130 10 043130 10
Annenstr. 113, 58453 Witten, Tel. 02302/6620 6.3 rapid blow 043140 10 043140 10
Marking tags Print
DEK Consecutive horizontal DEK 5 047346 500 DEK 6 046866 500
DEK Consecutive vertical DEK 5 047356 500 DEK 6 046876 500
WS WS 12/6.5
Blank 160992 540 WS 12/6 160990 600
DEK WS WS Printed WS 12/6.5 156895 100 WS 12/6 155766 200
Mounting rails, end brackets, further marking material see section “Accessories”
1) Maximum power loss 1.6 W
2) Note power loss of fuse cartridge up to 1.6 Watt
26
Fuse terminal blocks WSI 6 WSI 6 LD WSI 6 2 LD
for metric fuses with LED indicator for metric with 2 LED’s for metric fuses
W-series
fuses for DC or AC voltage for DC voltage (see note)
(see note)
Note:
With blown fuse the follow on
circuit is still under current.
Disconnect lever to open circuit.
W W W
Max. technical data 6.3 A/- 6.3 A/- 6.3 A/-
Dimensions/Approvals a r i q GOST LR u DNV a r q GOST LR u a r q GOST LR u
Width/length/height (mm) with TS 35 x 7.5 W 8/60/60 8/60/70 8/60/70
Insulation stripping length/clamping screw/screwdriver blade 12 mm/M 3.5/4.0 x 0.8 12 mm/M 3.5/4.0 x 0.8 12 mm/M 3.5/4.0 x 0.8
Rated data terminal base
Rated voltage/rated current/rated cross-section 500 V/6.3 A1)/6 mm2 500 V/6.3 A1)/6 mm2 500 V/6.3 A1)/6 mm2
Rated impulse voltage VDE 0100/1.89/pollution severity 6 kV/3 6 kV/3 6 kV/3
Further technical data
Tightening torque range Nm 0.8…1.6 0.8…1.6 0.8…1.6
Torque setting with DMS 2 electric screwdriver 3 3 3
Clampable conductor
Solid H07V-U mm2 0.5…10 0.5…10 0.5…10
Stranded H07V-R mm2 1.5…10 1.5…10 1.5…10
Flexible H07V-K mm2 0.5…10 0.5…10 0.5…10
Flexible H07V-K and ferrule according to DIN 46 228/1 mm2 0.5…6 0.5…6 0.5…6
Flexible H07V-K and ferrules with plastic insul. collar mm2 0.5…6 0.5…6 0.5…6
Max. clamping range in mm2, Gauge pin to IEC 60 947-1 Size 0.5…10 A5 0.5…10 A5 0.5…10 A5
Continuous current rating of cross-connection 2-pole A
Continuous current rating of cross-connection multipole A 26 26 26
UL/CSA rated data
Voltage/current/conductor size UL 300 V/10 A/20…8 AWG 300 V/10 A/20…8 AWG 300 V/10 A/20…8 AWG
Voltage/current/conductor size CSA 300 V/10 A/20…8 AWG 300 V/10 A/20…8 AWG 24 V/10 A/20…8 AWG
Ordering data Version W Cat. No. Qty. W Cat. No. Qty. W Cat. No. Qty.
Beige Wemid 101100 50
Beige Wemid/LED 12 V–/24 V~ 101130 50 24 V– 101270 50
Beige Wemid/LED 102820 50 20-30 V–/40-60 V~ 101220 50 48 V– 805575 50
Beige Wemid/LED Disconnect terminal with 40-60 V–/80-120 V~ 101230 50 60 V– 813395 50
Beige Wemid/LED contact sleeve 115 V–/230 V~ 101240 50
Replacement lever Beige Wemid/without LED
Beige Wemid/LED 103660 50 20-30 V–/40-60 V~ 101221 50 24V~ 101223 50
Beige Wemid/LED 40-60 V–/80-120 V~ 103550 50
Beige Wemid/LED 115 V–/230 V~ 103560 50
Partition/End plate Type Cat. No. Qty. Type Cat. No. Qty.
WTW WAP Type Cat. No. Qty. WAP 105000 50 WAP 105000 50
WAP 105000 50 WTW 2.5-10 105010 20 WTW 2.5-10 105010 20
Thickness 1.5 mm Thickness 1.5 mm WTW 2.5-10 105010 20 *) *)
Cross-connection *)
QL 2–10 QL 2 019430 50 QL 2 019430 50
QL 2 019430 50 QL 3 019440 50 QL 3 019440 50
QL 3 019440 50 QL 4 019450 50 QL 4 019450 50
QL 4 019450 50 QL 10 033830 20 QL 10 033830 20
QL 10 033830 20 BS-M 3x5 105210 100 BS-M 3x5 105210 100
BS-M 3x5 105210 100 PS 2.3 018040 20 PS 2.3 018040 20
Notching tool for QL WAW 2 PS 2.3 018040 20 WAW 2 900451 1 WAW 2 900451 1
G fuse cartridges 5 x 25 mm with indicator 2) WAW 2 900451 1
to DIN 41 576 Rated current (A): 0.2 med. blow 054690 10 054690 10
Rated voltage 250 V 0.5 med. blow 054690 10 051030 10 051030 10
0.8 med. blow 051030 10 064640 10 064640 10
1 med. blow 064640 10 026580 10 026580 10
10 med. blow 026580 10 019310 10 019310 10
2 rapid blow 019310 10 019270 10 019270 10
4 rapid blow 019270 10 019280 10 019280 10
6.3 rapid blow 019280 10 019290 10 019290 10
G fuse cartridges 5 x 20 mm 2) 019290 10
to DIN 41 660 IEC 127 BL 1 Rated current (A): 0.10 rapid blow 043030 10 043030 10
Rated voltage 250 V 0.20 rapid blow 043030 10 043040 10 043040 10
Switching capacity 1500 A 0.25 rapid blow 043040 10 043050 10 043050 10
(at 250 V, 50 Hz, cos ! = 0.7) 0.50 rapid blow 043050 10 043060 10 043060 10
1.0 rapid blow 043060 10 043070 10 043070 10
1.6 rapid blow 043070 10 043080 10 043080 10
2.0 rapid blow 043080 10 043090 10 043090 10
2.5 rapid blow 043090 10 043100 10 043100 10
G fuse cartridges 5 x 30 mm 3.15 rapid blow 043100 10 043110 10 043110 10
(500 V~/0.032…6.3 A). 4.0 rapid blow 043110 10 043120 10 043120 10
Available from Fa. Wickmann-Werke GmbH, 5.0 rapid blow 043120 10 043130 10 043130 10
Annenstr. 113, 58453 Witten, Tel. 02302/6620 6.3 rapid blow 043130 10 043140 10 043140 10
043140
Mounting rails, end brackets, further marking material see section “Accessories” 10
*) Add partition to last WSI 6 1) Maximum power loss 1.6 W
2) Note power loss of fuse cartridge up to 1.6 Watt
27
Fuse terminal blocks WSI 6/21) WSI 6/21) with LED WSI 6/21) with 2 LED's
for inch fuses for VAC/VDC inch fuse for VDC inch fuse
(see note) (see note)
Note:
With blown fuse the follow on
circuit is still under current.
Disconnect lever to open circuit.
W W W
Max. technical data 10 A/- 10 A/- 10 A/-
Dimensions/Approvals a r i q GOST LR u DNV a r GOST LR u DN a r GOST LR u
Width/length/height (mm) with TS 35 x 7.5 W 12/60/67 12/60/79 12/60/79
Insulation stripping length/clamping screw/screwdriver blade 12 mm/M 3.5/4.0 x 0.8 12 mm/M 3.5/4.0 x 0.8 12 mm/M 3.5/4.0 x 0.8
Rated data terminal base
Rated voltage/rated current/rated cross-section 500 V/6.3 A2)/6 mm2 500 V/6.3 A2) /6 mm2 500 V/6.3 A2) /6 mm2
Rated impulse voltage VDE 0100/1.89/pollution severity 6 kV/3 6 kV/3 6 kV/3
Further technical data
Tightening torque range Nm 0.8…1.6 0.8…1.6 0.8…1.6
Torque setting with DMS 2 electric screwdriver 3 3 3
Clampable conductor
Solid H07V-U mm2 0.5…10 0.5…10 0.5…10
Stranded H07V-R mm2 1.5…10 1.5…10 1.5…10
Flexible H07V-K mm2 0.5…10 0.5…10 0.5…10
Flexible H07V-K and ferrule according to DIN 46 228/1 mm2 0.5…6 0.5…6 0.5…6
Flexible H07V-K and ferrules with plastic insul. collar mm2 0.5…6 0.5…6 0.5…6
Max. clamping range in mm2, Gauge pin to IEC 60 947-1 Size 0.5…10 A5 0.5…10 A5 0.5…10 A5
Continuous current rating of cross-connection 2-pole A
Continuous current rating of cross-connection multipole A 26 26 26
UL/CSA rated data
Voltage/current/conductor size UL 600 V/16 A/20…8 AWG 600 V/16 A/20…8 AWG 600 V/16 A/20…8 AWG
Voltage/current/conductor size CSA 600 V/16 A/20…8 AWG 10–220 V/16 A/20…8 AWG 24 V/16 A/20…8 AWG
Ordering data Version W Cat. No. Qty. W Cat. No. Qty. W Cat. No. Qty.
Beige Wemid 101400 25
Beige Wemid/LED 14 V–/10-28 V~ 101410 25 24 V– 101450 25
Beige Wemid/LED 15-30 V–/30-60 V~101420 25
Beige Wemid/LED 40-60 V–/80-120 V~101430 25
Beige Wemid/LED 110 V–/220 V~ 101440 25
Partition/End plate Type Cat. No. Qty. Type Cat. No. Qty. Type Cat. No. Qty.
WTW WAP WAP 105000 50 WAP 105000 50 WAP 105000 50
WTW 2.5-10 105010 20 WTW 2.5-10 105010 20 WTW 2.5-10 105010 20
Thickness 1.5 mm Thickness 1.5 mm *) *) *)
Cross-connection
QL 2–10 QL 2 047070 50 QL 2 047070 50 QL 2 047070 50
QL 3 047080 50 QL 3 047080 50 QL 3 047080 50
QL 4 047090 50 QL 4 047090 50 QL 4 047090 50
QL 10 047100 20 QL 10 047100 20 QL 10 047100 20
BS-M 3x5 105210 100 BS-M 3x5 105210 100 BS-M 3x5 105210 100
PS 2.3 018040 20 PS 2.3 018040 20 PS 2.3 018040 20
Notching tool for QL WAW 2 WAW 2 900451 1 WAW 2 900451 1 WAW 2 900451 1
G fuse cartridges 5 x 25 mm with indicator3)
to DIN 41 576 Rated current (A): 0.2 med. blow Fuse cartridges Fuse cartridges Fuse cartridges
Rated voltage 250 V 0.5 med. blow 1/4" x 1 1/4" (6.3 x 32) 1/4" x 1 1/4" (6.3 x 32) 1/4" x 11/4" (6.3 x 32)
0.8 med. blow Rated voltage 440 V Rated voltage 440 V Rated voltage 440 V
1 med. blow E2A 029450 10 E2A 029450 10 E2A 029450 10
10 med. blow E 3A 029570 10 E 3A 029570 10 E 3A 029570 10
2 rapid blow E 5A 029460 10 E 5A 029460 10 E 5A 029460 10
4 rapid blow E 7A 029580 10 E 7A 029580 10 E 7A 029580 10
6.3 rapid blow E 10 A 029390 10 E 10 A 029390 10 E 10 A 029390 10
G fuse cartridges 5 x 20 mm 3)
to DIN 41 660 IEC 127 BL 1 Rated current (A): 0.10 rapid blow 043030 10
Rated voltage 250 V 0.20 rapid blow
Switching capacity 1500 A 0.25 rapid blow G-fuse cartridges
(at 250 V, 50 Hz, cos ! = 0.7) 0.50 rapid blow 1/4" x 1 1/4" (6.3 x 32)
1.0 rapid blow (250 V 0.05…6.3 A)
1.6 rapid blow available from Firma ELU
2.0 rapid blow Inselstraße 18
2.5 rapid blow 44143 Dortmund
G fuse cartridges 5 x 30 mm 3.15 rapid blow ++49231 – 557030-0.
(500 V~/0.032…6.3 A). 4.0 rapid blow
Available from Fa. Wickmann-Werke GmbH, 5.0 rapid blow
Annenstr. 113, 58453 Witten, Tel. ++492302-6620 6.3 rapid blow
Marking tags Print
DEK Consecutive horizontal DEK 047346 500 DEK 047346 500 DEK 047346 500
DEK Consecutive vertical DEK 047356 500 DEK 047356 500 DEK 047356 500
WS Blank WS 12/6.5 160992 540 WS 12/6.5 160992 540 WS 12/6.5 160992 540
DEK WS WS Printed WS 12/6.5 156895 100 WS 12/6.5 156895 100 WS 12/6.5 156895 100
Mounting rails, end brackets, further marking material see section “Accessories”
1) 2) Maximum power loss 1.6 W
Rated thermal current to VDE 0611
*) Add partition to last WSI 6 = 6.3 A, when used as a short-circuit fuse up to 15 A. 3) Note power loss of fuse cartridge up to 1.6 Watt
28
Fuse terminal blocks SAKS 4/35 SAKS 2/35 SAKS 5/35
for D 01-fuse E 14 for D-fuse E 16 for D 02-fuse E 18
W-series
Note:
With blown fuse the follow on
circuit is still under current.
W W
Disconnect lever to open circuit.
W
Max. technical data
Dimensions/Approvals
Width/length/height (mm) with TS 35 x 7.5 W 24/75/66 28/80/75 28/80/66
Insulation stripping length/clamping screw/screwdriver blade 14 mm/M 4/5.5 x 1 12 mm/M 4/5.5 x 1 13 mm/M 4/5.5 x 1
Rated data terminal base
Rated voltage/rated current/rated cross-section 400 V~4) /16 A/10 mm2 500 V~/10 (25) A5) /10 mm2 400 V~4 ) /63 A/16 mm2
Rated impulse voltage VDE 0100/1.89/pollution severity 6 kV/3 6 kV/3 6 kV/3
Further technical data
Tightening torque range Nm 1.2…2.4 1.2…2.4 1.2…2.4
Torque setting with DMS 2 electric screwdriver 4 4 4
Clampable conductor
Solid H07V-U mm2 0.5…16 0.5…16 1.5…16
Stranded H07V-R mm2 1.5…10 0.5…10 1.5…16
Flexible H07V-K mm2 0.5…10 0.5…10 1.5…16
Flexible H07V-K and ferrule according to DIN 46 228/1 mm2 0.5…10 0.5…10 1.5…16
Flexible H07V-K and ferrules with plastic insul. collar mm2
Max. clamping range in mm2, Gauge pin to IEC 60 947-1 Size 0.33…16 B6 0.33…16 B6 1.5…16 B7
Continuous current rating of cross-connection 2-pole A (QL 2…5) 47 (QL 2…5) 47 (QL 2…5) 47
Continuous current rating of cross-connection multipole A (QL 6…10) 36 (QL 6…10) 36 (QL 6…10) 36
UL/CSA rated data
Voltage/current/conductor size UL
Voltage/current/conductor size CSA
Ordering data Version W Cat. No. Qty. W Cat. No. Qty. W Cat. No. Qty.
Beige Wemid Wemid beige KrG 050180 20 Wemid beige KrG 136870 20 Wemid beige KrG 050210 20
Beige Wemid/LED Neozed D 01 Diazed E 16 Neozed D 02
Beige Wemid/LED
Beige Wemid/LED
Beige Wemid/LED
Partition/End plate Type Cat. No. Qty. Type Cat. No. Qty. Type Cat. No. Qty.
WTW WAP
WTW 105880 20 WTW 105880 20 WTW 105880 20
Thickness 1.5 mm Thickness 1.5 mm
Cross-connection
QL 2–10 QL 2 032800 20 QL 2 020780 20 QL 2 020780 20
QL 3 032810 20 QL 3 020790 20 QL 3 020790 20
QL 4 032820 20 QL 4 020800 20 QL 4 020800 20
QL 10 033900 20 QL 10 033890 20 QL 10 033890 20
BS M 4x9 010330 100 BS M 4x9 010330 100 BS M 4x9 010330 100
SS M 4 013640 100 SS M 4 013640 100 SS M 4 013640 100
Notching tool for QL WAW 2
G fuse cartridges 5 x 25 mm with indicator3)
to DIN 41 576 Rated current (A): 0.2 med. blow Fuse cartridges D 01 Fuse cartridges D Fuse cartridges D 02
Rated voltage 250 V 0.5 med. blow Rated voltage 380 V Rated voltage 380 V Rated voltage 500 V
0.8 med. blow E 14/2 013740 10 E 10 A 020850 25 E 18/20 036130 10
1 med. blow E 14/4 013750 10 E 16 A 020860 25 E 18/25 036140 10
10 med. blow E 14/6 032830 10 E 20 A 020870 25 E 18/35 036150 10
2 rapid blow E 14/10 032840 10 E 25 A 020880 25 E 18/50 036160 10
4 rapid blow E 14/16 032850 10 E 18/63 036170 10
6.3 rapid blow
G fuse cartridges 5 x 20 mm 3) Gauge rings Gauge rings Gauge rings
to DIN 41 660 IEC 127 BL 1 Rated current (A): 0.10 rapid blow P 14/2 013800 50
Rated voltage 250 V 0.20 rapid blow P 14/4 013810 50
Switching capacity 1500 A 0.25 rapid blow P 14/6 032860 50
(at 250 V, 50 Hz, cos ! = 0.7) 0.50 rapid blow P 14/10 032870 50 P 16/10 020890 100
1.0 rapid blow P 16/16 020900 100
1.6 rapid blow P 16/20 020910 100 P 18/20 036180 50
2.0 rapid blow P 18/25 036190 50
2.5 rapid blow P 18/35 036200 50
G fuse cartridges 5 x 30 mm 3.15 rapid blow P 18/50 036210 50
(500 V~/0.032…6.3 A). 4.0 rapid blow Screw cap (spare) Screw cap (spare) Screw cap (spare)
Available from Fa. Wickmann-Werke GmbH, 5.0 rapid blow SK 033941 20 SK 028411 20 SK 035931 20
Annenstr. 113, 58453 Witten, Tel. ++492302-6620 6.3 rapid blow
Marking tags Print
DEK Consecutive horizontal DEK 5 047346 500 DEK 5 047346 500 DEK 5 047346 500
DEK Consecutive vertical DEK 5 047356 500 DEK 5 047356 500 DEK 5 047356 500
WS WS 12/6.5
Blank 160992 540 WS 12/6.5 160992 540 WS 12/6.5 160992 540
DEK WS WS Printed WS 12/6.5 156895 100 WS 12/6.5 156895 100 WS 12/6.5 156895 100
Mounting rails, end brackets, further marking material see section “Accessories”
4) Also for 400 V~ with Neozed-marine fuse
5) Current for overload upto 10 A, for short-current upto 25 A
29
Terminal blocks WDU 2.5/TC
for temperature measuring circuits
W
Weidmüller thermocouple terminals are
Dimensions/Approvals
specially designed to transmit very small
Width/length/height (mm) with TS 35 x 7.5 W 10/60/50.5
voltages in temperature measuring circuits.
Insulation stripping length/clamping screw/screwdriver blade 10 mm/M 2.5/3.5 x 0.6
Special busbars ensure that no false Rated data
signals are transmitted in the terminal Rated voltage/rated current/rated cross-section –/–/2.5 mm2
when temperature differences between the Rated impulse voltage VDE 0110/1.89/pollution severity
positive and negative paths exist. Further technical data
This high measuring precision is required, Tightening torque range Nm 0.4...0.6
for example, in aircraft engine performance Torque setting with DMS 2 electric screwdriver 1
test rigs, complicated chemical processes, Clampable conductor
Solid H07V-U mm2 0.5…2.5
controllers, etc.
Stranded H07V-R mm2 1.5…2.5
• Busbar material corresponds to thermal Flexible H07V-K mm2 0.5…2.5
and compensating conductors Flexible H07V-K and ferrule according to DIN 46 228/1 mm2 0.5…2.5
Solid H07V-K and ferrules with plastic insul. collar mm2 0.5…2.5
• Clear thermocouple marking Max. clamping range in mm2, Gauge pin to IEC 60 947-1 Size 0.13…4 A2
Continuous current rating of cross-connection 2-pole A
• 2-pole blocks per thermocouple
Continuous current rating of cross-connection multipole A
• Stacking width: 10 mm UL/CSA rated data
Voltage/current/conductor size UL
Configuration of a temperature Voltage/current/conductor size CSA
measuring circuit Ordering data W Cat. No. Qty.
Version 102410 50
for Thermocouple Type K NiCr – Ni 102420 50
to IEC 584 Type T Cu – CuNi 102430 50
(DIN 43710) Type J Fe – CuNi 102440 50
Type S a. R PT 10% – Pt Rh/PT 13% – Pt Rh 103370 50
Type B Pt 30% Rh – Pt 6% Rh 103330 50
Type E NiCr – CuNi 104150 50
1 Thermocouple (sensor) 4 Reference junction
Type N NiSil – Nicrosil
2 Thermocouple terminals 5 Supply conductors (to and from)
3 Compensating conductor 6 Measuring instrument
End plate/Partition Type Cat. No. Qty.
WAP (Thickness 1.5 mm) Beige Wemid WAP 2.5-10 105000 50
The thermocouple terminals shown in this
measuring circuit thermoelectrically trans-
WTW (Thickness 1.5 mm) Beige Wemid WTW 2.5-10 105010 20
mit thermoelectric voltage from the ther-
mocouple to the reference junction and
the indicator unit via the compensating
conductor. Thermocouple terminals are
required for constructing a temperature
circuit.
Technical data
Thermocouple to IEC 584 (DIN 43 710)
Busbar
Cromel
Alumel
Copper
Constantan
Iron
Constantan
E-Copper
A-Copper
S-Copper/
E-Copper
30
Feed-through terminals WDU 4 SA Feed through terminals WPO 4
with WSA plug adaptor with retrofitting electronic components
W-series
W W
Max. technical data 32 A/4 mm2
Dimensions/Approvals arq Dimensions/Approvals aq
Width/length/height (mm) with TS 35 x 7.5 W 6/60/47 Width/length/height (mm) with TS 35 x 7.5 W 6/60/47
Insulation stripping length/clamping screw/screwdriver blade 10 mm/M 3/3.5 x 0.6 Insulation stripping length/clamping screw/screwdriver blade 9 mm/M 3/3.5 x 0.6
Rated data Rated data IEC 60 947-7-1
Rated voltage/rated current/rated cross-section 400 V/34 A/4 mm2 Rated voltage/rated current/rated cross-section 250 V/32 A/4 mm2
Rated impulse voltage VDE 0110/1.89/pollution severity 6 kV/3 Rated impulse voltage VDE 0100/1.89/pollution severity 4 kV/3
Further technical data Further technical data
Tightening torque range Nm 0.5...1.0 Tightening torque range Nm 0.5...1.0
Torque setting with DMS 2 electric screwdriver 2 Torque setting with DMS 2 electric screwdriver 2
Clampable conductor Clampable conductor
Solid H07V-U mm2 0.5…6 Solid H07V-U mm2 0.5…4
Stranded H07V-R mm2 1.5…6 Stranded H07V-R mm2 1.5…4
Flexible H07V-K mm2 0.5…4 Flexible H07V-K mm2 0.5…4
Flexible H07V-K and ferrule according to DIN 46 228/1 mm2 0.5…4 Flexible H07V-K and ferrule according to DIN 46 228/1 mm2 0.5…4
Flexible H07V-K and ferrules with plastic insul. collar mm2 0.5…4 Flexible H07V-K and ferrules with plastic insul. collar mm2 0.5…4
Max. clamping range in mm2, Gauge pin to IEC 60 947-1 Size 0.13…6 A4 Max. clamping range in mm2, Gauge pin to IEC 60 947-1 Size 0.13…4 A3
Continuous current rating of cross-connection 2-pole A
Continuous current rating of cross-connection multipole A Wire diameter electrical component mm 0.8...1.0 mm
UL/CSA rated data UL/CSA rated data
Voltage/current/conductor size UL 300 V/25 A/22…12 AWG Voltage/current/conductor size UL 300 V/10 A / 26…12 AWG
Voltage/current/conductor size CSA 300 V/–/22…12 AWG CSA
Ordering data W Cat. No. Qty. Ordering data Type W Cat. No. Qty.
Beige Wemid 102110 100 Beige Wemid WPO4 103600 50
Blue Wemid 102118 100
End plate Type Cat. No. Qty. Barrier Type Cat. No. Qty.
WAP WAP 2.5-10 105000 50 Thickness 2.5 mm ZR 107110 20
(Thickness 1.5 mm) WAP 2.5-10 105008 50
Partition Busbar
WTW (Thickness 1.5 mm) WTW 2.5-10 105010 20 SSch 7.3x1.2 107120 1m
WTW 2.5-10 105018 20
Cross-connection
Screen lug LS 2.8 LS 2.8 105640 50
31
Reihenklemmen with WDU 1.5/BLA WDU 1.5/LD/BLA WDU 1.5/R/BLA WDK 2.5/BLA R 5.08
Steckanschluß für with LED red Negative return conductor 250 V
in blue
Steckverbinder BLA/BLZ
W W W W
Dimensions/Approvals arq arq arq
Width/length/height (mm) with TS 35 x 7.5 W 5.08/45.4/57.5*/45.0/55.5* 5.08/45.4/57.5*/45.0/55.5* 5.08/45.4/57.5*/45.0/55.5* 5.08/58/53/63.5*
Insulation stripping length/clamping screw/screwdriver blade 10 mm/M 2.5/3.5 x 0.6 10 mm/M 2.5/3.5 x 0.6 10 mm/M 2.5/3.5 x 0.6 12 mm/M 2.5/3.5 x 0.6
Rated data
Rated voltage/rated current/rated cross-section 250 V/10 (2x8) A/1.5 mm2 – V/10 (2x8) A/1.5 mm2 – V/– A/1.5 mm2 250 V/17.52) A/2.5 mm2
Rated impulse voltage VDE 0100/1.89/pollution severity 4 kV/3 4 kV/3
Further technical data
Tightening torque range Nm 0.4...0.6 0.4...0.6 0.4...0.6 0.4...0.6
Torque setting with DMS 2 electric screwdriver 1 1 1 1
Clampable conductor
Solid H07V-U mm2 0.5…4/2.5 0.5…4/2.5 0.5…4/2.5 0.5…4/2.5
Stranded H07V-R mm2 1.5…2.5/1.5 1.5…2.5/1.5 1.5…2.5/1.5 1.5…2.5/1.5
Flexible H07V-K mm2 0.5…2.5/1.5 0.5…2.5/1.5 0.5…2.5/1.5 0.5…2.5/1.5
Flexible H07V-K and ferrule according to DIN 46 228/1 mm2 0.5…2.5/1.5 0.5…2.5/1.5 0.5…2.5/1.5 0.5…2.5/1.5
Flexible H07V-K and ferrules with plastic insul. collar mm2 0.5…2.5/1.51) 0.5…2.5/1.51) 0.5…2.5/1.51) 0.5…2.5/1.51)
Max. clamping range in mm2, Gauge pin to IEC 60 947-1 Size 0.13…4 A 3/A 1 0.13…4 A 3/A 1 0.13…4 A 3/A 1 0.13…4 A 3/A 1
Continuous current rating of cross-connection 2-pole A 35 35 35 –
Continuous current rating of cross-connection multipole A 35 35 35 –
UL/CSA rated data
Voltage/current/conductor size UL 300 V/20 (2x10) A/26…16 AWG 300 V/20 (2x10) A/26…16 AWG 300 V/20 (2x10) A/26…16 AWG
Voltage/current/conductor size CSA 300 V/10 A/26…12 AWG 12…110 V/10 A/26…12 AWG –/–/26…12 AWG
Ordering data Type W Cat. No. Qty. W Cat. No. Qty. W Cat. No. Qty. W Cat. No. Qty.
Standard 157726 100 103810 100
Blue 157731 100
With LED red 12 V– 157727 100
With LED red 24 V– 157728 100
With LED red 48 V– 157729 100
With LED red
Fixed-pole blocks on request
End plate/Fixing bracket** Type Cat. No. Qty. Type Cat. No. Qty. Type Cat. No. Qty. Type Cat. No. Qty.
WAP (Thickness 2.5 mm) With pin 157732 50 With pin 157732 50 With pin 157732 50 With pin 107010 20
Without pin 157733 50 Without pin 157733 50 Without pin 157733 50 Without pin 107000 20
WBB orange (Thickness 5 mm) With pin 106826 10 With pin 106826 10 With pin 106826 10 With pin 107276 10
Without pin 106816 10 Without pin 106816 10 Without pin 106816 10 Without pin 107266 10
Cross-connection Cross-connection comb, insul.
WQV WQV 2.5/2 105366 50 WQV 2.5/2 105366 50 WQV 2.5/2 105366 50 WQB A/2 157895 50
WQV 2.5/3 106376 50 WQV 2.5/3 105376 50 WQV 2.5/3 105376 50 WQB A/3 157896 50
WQV 2.5/4 105386 50 WQV 2.5/4 105386 50 WQV 2.5/4 105386 50 WQB A/4 157897 50
WQV 2.5/10 105446 20 WQV 2.5/10 105446 20 WQV 2.5/10 105446 20 WQB A/10 157899 20
Notching tool WAW 1 for WQV WAW 1 900450 1 WAW 1 900450 1 WAW 1 900450 1
Negative conductor-busbar
0.5 x 4 x 120 mm ML-SSch 106320 3 ML-SSch 106320 3
Coding element
SLA-KO 132356 100 SLA-KO 132356 100 SLA-KO 132356 100 SLA-KO 132356 100
32
WDU 1.5/BLZ 5.08 WDU 1.5/BLZ/ WDU 1.5/BLZ/ WDK 2.5/BLZ WDU 2.5/BLZ WDK 2.5/BLZ
LD/5.08 R 5.08 R 5.08 R 7.62 R 7.62
W-series
with LED red Negative return conductor 250 V 400 V 400 V
in blue
W W W W W W
arq arq arq a
5.08/45.4/57.5*/45.0/55.5 5.08/45.4/57.5*/45.0/55.5* 5.08/45.4/57.5*/45.0/55.5* 5.08/58/53/63.5* 7.62/45.4/57.5*/45.0/55.5 7.62/58/53/63.5*
10 mm/M 2.5/3.5 x 0.6 10 mm/M 2.5/3.5 x 0.6 10 mm/M 2.5/3.5 x 0.6 12 mm/M 2.5/3.5 x 0.6 10 mm/M 2.5/3.5 x 0.6 12 mm/M 2.5/3.5 x 0.6
250 V/10 (2x8) A/1.5 mm2 – V/10 (2x8) A/1.5 mm2 – V/– A/1.5 mm2 250 V/182) A/2.5 mm2 400 V/24(2x12)2) (2x8) A/1.5 mm2 400 V/202) A/2.5 mm2
4 kV/3 4 kV/3 6 kV/3 6 kV/3
300 V/20 (2 x 10) A/26…16 AWG 300 V/20 (2 x 10) A/26…16 AWG 300 V/20 (2 x 10) A/26…16 AWG 300 V/10 A/26…12 AWG
300 V/10 A/26…12 AWG 12…110 V/10 A/26…12 AWG –/–/26…12 AWG
W Cat. No. Qty. W Cat. No. Qty. W Cat. No. Qty. W Cat. No. Qty. W Cat. No. Qty. W Cat. No. Qty.
157734 100 103440 100 103890 100 103850 100
159690 100 157739 100
12 V– 157735 100
24 V– 157736 100
48 V– 157737 100
110 V– 157738 100
Type Cat. No. Qty. Type Cat. No. Qty. Type Cat. No. Qty. Type Cat. No. Qty. Type Cat. No. Qty. Type Cat. No. Qty.
With pin 157732 50 With pin 157732 50 With pin 157732 50 With pin 107010 20 With pin 157732 50 With pin 107010 20
Without pin 157733 50 Without pin 157733 50 Without pin 157733 50 Without pin 107000 20 Without pin 157733 50 Without pin 107000 20
With pin 106826 10 With pin 106826 10 With pin 106826 10 With pin 107276 10 With pin 107360 10 With pin 107296 10
Without pin 106816 10 Without pin 106816 10 Without pin 106816 10 Without pin 107266 10 Without pin 107350 10 Without pin 107286 10
Cross-connection comb, insul.
WQV 2.5/2 105366 50 WQV 2.5/2 105366 50 WQV 2.5/2 105366 50 WQB A/2 157895 50
WQV 2.5/3 106376 50 WQV 2.5/3 105376 50 WQV 2.5/3 105376 50 WQB A/3 157896 50
WQV 2.5/4 105386 50 WQV 2.5/4 105386 50 WQV 2.5/4 105386 50 WQB A/4 157897 50
WQV 2.5/10 105446 20 WQV 2.5/10 105446 20 WQV 2.5/10 105446 20 WQB A/10 157899 20
WAD 5/2 157740 20 WAD 5/2 157740 20 WAD 5/2 157740 20 WAD 5/2 157740 20 WAD 5/2 157740 20 WAD 5/2 157740 20
BLZ-KO 154571 100 BLZ-KO 154571 100 BLZ-KO 154571 100 BLZ-KO 154571 100 BLZ-KO 154571 100 BLZ-KO 154571 100
BLZ 4 152666 100 BLZ 4 152666 100 BLZ 4 152666 100 BLZ 4 152666 100 BLZ 4 162307 100 BLZ 4 162307 100
BLZ 6 152686 50 BLZ 6 152686 50 BLZ 6 152686 50 BLZ 6 152686 50 BLZ 6 162309 50 BLZ 6 162309 50
BLZ 8 152706 50 BLZ 8 152706 50 BLZ 8 152706 50 BLZ 8 152706 50 BLZ 8 162311 50 BLZ 8 162311 50
BLZ 4 B 152896 100 BLZ 4 B 152896 100 BLZ 4 B 152896 100 BLZ 4 B 152896 100 BLZ 4 B 162340 100 BLZ 4 B 162340 100
BLZ 6 B 152916 50 BLZ 6 B 152916 50 BLZ 6 B 152916 50 BLZ 6 B 152916 50 BLZ 6 B 162342 50 BLZ 6 B 162342 50
BLZ 8 B 152936 50 BLZ 8 B 152936 50 BLZ 8 B 152936 50 BLZ 8 B 152936 50 BLZ 8 B 162344 50 BLZ 8 B 162344 50
DEK 5 047346 500 DEK 5 047346 500 DEK 5 047346 500 DEK 5 047346 500 DEK 5 047346 500 DEK 5 047346 500
DEK 5 047356 500 DEK 5 047356 500 DEK 5 047356 500 DEK 5 047356 500 DEK 5 047356 500 DEK 5 047356 500
WS 12/5 160986 720 WS 12/5 160986 720 WS 12/5 160986 720 WS 12/5 160986 720 WS 12/6.5 160992 540 WS 12/6.5 160992 540
WS 12/5 144746 200 WS 12/5 144746 200 WS 12/5 144746 200 WS 12/5 144746 200 WS 12/6.5 156895 100 WS 12/6.5 156895 100
33
Feed-through terminal blocks WDU 2.5 F WDU 2.5 FF WDK 2.5 F WDK 2.5 FV
W W W W
Max. technical data 12 A/- 12 A/- 12 A/- 12 A/-
Dimensions/Approvals a r i q LR a r i q LR a r i q LR a r q LR
Width/length/height (mm) with TS 35 x 7.5 W 5/60/47 5/60/47 5/69/63 5/69/63
Insulation stripping length/clamping screw/screwdriver blade 10 mm/M 2.5/3.5 x 0.6 10 mm/- 10 mm/M 2.5/3.5 x 0.6 10 mm/M 2.5/3.5 x 0.6
Rated data
Rated voltage/rated current/rated cross-section 500 V m. IH/12 (2x6) A 500 V m. IH/12 (2x6) A 400 V m. IH/12 (2x6) A/2.5 400 V m. IH/12 (2x6) A/2.5
Rated voltage clamping yoke 2.5 mm2 2.5 mm2 2.5 mm2
Rated voltage 2.8 mm push-on tab/solder connection 1 / - mm2 1 / - mm2 1 / - mm2 1 / - mm2
Rated impulse voltage VDE 0110/1.89/pollution severity 6 kV/3 6 kV/3 6 kV/3 6 kV/3
Further technical data
Tightening torque range Nm 0.4...0.8 0.4...0.6 0.4...0.6
Torque setting with DMS 2 electric screwdriver 1 1 1
Clampable conductor
Solid H07V-U mm2 0.5…4 0.5…4/1 0.5…4/1
Stranded H07V-R mm2 0.5…2.5 1.5…2.5 1.5…2.5
Flexible H07V-K mm2 0.5…2.5 0.5…1 0.5…2.5 0.5…2.5
Flexible H07V-K and ferrule according to DIN 46 228/1 mm2 0.5…2.5 0.5…2.5 0.5…2.5
Flexible H07V-K and ferrules with plastic insul. collar mm2 0.5…2.51) 0.5…2.51) 0.5…2.51)
Max. clamping range in mm2, Gauge pin to IEC 60 947-1 Size 0.13…4 A3 – 0.13…4 A3 0.13…4 A3
Continuous current rating of cross-connection 2-pole A 12 12 32 32
Continuous current rating of cross-connection multipole A 12 12 32 32
UL/CSA rated data
Voltage/current/conductor size UL 300 V/10 A/22…12 AWG 300 V/10 A/22…12 AWG 300 V/10 A/22…12 AWG 300 V/10 A/22…12 AWG
Voltage/current/conductor size CSA 300 V/10 A/26…12 AWG 300 V/10 A/26…12 AWG 300 V/10 A/26…12 AWG 300 V/10 A/26…12 AWG
Ordering data Version W Cat. No. Qty. W Cat. No. Qty. W Cat. No. Qty. W Cat. No. Qty.
Beige Wemid 102180 100 102190 100 102160 100 102240 100
Beige Wemid
Beige Wemid
Beige Wemid
Blue Wemid 102168 100
End plate/Partition Type Cat. No. Qty. Type Cat. No. Qty. Type Cat. No. Qty. Type Cat. No. Qty.
WAP (Thickness 3 mm) Wemid WAP 2.5-10 105000 50 WAP 2.5-10 105000 50 WAP 105910 20 WAP 105910 20
WAP 2.5 (Thickn. 1.5 mm) Blue Wemid WAP 2.5-10 105008 50 WAP 2.5-10 105008 50 WAP 105918 20
WTW (Thickness 1.5 mm) Wemid WTW 2.5-10 105010 20 WTW 2.5-10 105010 20 WTW (Ex) e 105880 20 WTW (Ex) e 105880 20
Wemid WTW 2.5-10 105018 20 WTW 2.5-10 105018 20
Cross-connection
WQV Screen lug LS 2.8 WQV 2.5/2 105366 50 WQV 2.5/2 105366 50 WQV 2.5/2 105366 50 WQV 2.5/2 105366 50
WQV 2.5/3 105376 50 WQV 2.5/3 105376 50 WQV 2.5/3 105376 50 WQV 2.5/3 105376 50
WQV 2.5/4 105386 50 WQV 2.5/4 105386 50 WQV 2.5/4 105386 50 WQV 2.5/4 105386 50
WQV 2.5/10 105446 20 WQV 2.5/10 105446 20 WQV 2.5/10 105446 20 WQV 2.5/10 105446 20
WQB B/24 157906 20 WQB A/24 157900 20 WQB A/24 157900 20
LS 2.8 105640 50 LS 2.8 105640 50 LS 2.8 105640 50 LS 2.8 105640 50
Notching tool for WQV WAW 1 WAW 1 900450 1 WAW 1 900450 1 WAW 1 900450 1 WAW 1 900450 1
Test adaptor
WTA TA 1 TA 1 053586 20 TA 1 053586 20 TA 1 053586 20 TA 1 053586 20
Strain relief
Test plug/Sockets/Insulating sleeves
PS 2.3 StB 8.5 Insulating sleeves IH 2.8 038606 100 IH 2.8 038606 100 IH 2.8 038606 100 IH 2.8 038606 100
Cover
ADP 2 048530 20x1m ADP 2 048530 20x1m ADP 3 048540 20x1m ADP 3 048540 20x1m
HP 2 048566 20 HP 2 048566 20 HP 3 048576 20 HP 3 048576 20
WAD with symbol
WAD white for self-labeling
Group marking
WT 4 T5 WGB T5 034850 100 WT 4 134106 100 WT 4 134106 100 WT 4 134106 100
SF 10 033240 1000 SF 10 033240 1000 SF 10 033240 1000 SF 10 033240 1000
SG 10 033250 1000 SG 10 033250 1000 SG 10 033250 1000 SG 10 033250 1000
Tag carrier for S 10 makers
Marking tags Print
DEK Consecutive horizontal DEK 047346 500 DEK 047346 500 DEK 5 047346 500 DEK 5 047346 500
DEK Consecutive vertical DEK 047356 500 DEK 047356 500 DEK 5 047356 500 DEK 5 047356 500
WS Blank WS 12/5 160986 720 WS 12/5 160986 720 WS 8/5 164074 720 WS 8/5 164074 720
DEK WS WS Printed WS 12/5 144746 200 WS 12/5 144746 200 WS 8/5 158008 200 WS 8/5 158008 200
Mounting rails, end brackets, further marking material see section “Accessories”
1) Ferrules with optimum diameter for terminals with 5 mm pitch: Cat. No. 133310
34
WDK 2.5 FF WDK 2.5 FFV WDK 2.5 T WDU 2.5 T WDU 2.5 L WTR 2.5 L
WDK 2.5 TT WDU 2.5 LL WTR 2.5 LL
W-series
W W W W W W
12 A/- 12 A/- 10 A/- 10 A/- 15 A/- 10 A/-
a r i q LR a r q LR
5/75/63 5/75/63 5/69/63/78 5/60/47/70 5/60/64/47 5/60/64/47
10 mm/M 2.5/3.5 x 0.6 10 mm/M 2.5/3.5 x 0.6 10 mm/M 2.5/3.5 x 0.6 10 mm/M 2.5/3.5 x 0.6
500 V m. IH/12 (2x6) A 500 V m. IH/12 (2x6) A 125 V/10 A 125 V/10 A/2.5 mm2 400 V/15 A/2.5 400 V/14 A
2.5 mm2 2.5 mm2 2.5 mm2 2.5 mm2
1 / - mm2 1 / - mm2 - / 1.5 mm2 - / 1.5 mm2
6 kV/3 6 kV/3 2.5 kV/3 2.5 kV/3 6 kV/3 6 kV/3
WQV 2.5/2 105366 50 WQV 2.5/2 105366 50 WQV 2.5/2 105366 50 WQV 2.5/2 105366 50 WQV 2.5/2 105366 50 QL 2 021586 100
WQV 2.5/3 105376 50 WQV 2.5/3 105376 50 WQV 2.5/3 105376 50 WQV 2.5/3 105376 50 WQV 2.5/3 105376 50 QL 3 021590 100
WQV 2.5/4 105386 50 WQV 2.5/4 105386 50 WQV 2.5/4 105386 50 WQV 2.5/4 105386 50 WQV 2.5/4 105386 50 QL 4 021600 50
WQV 2.5/10 105446 20 WQV 2.5/10 105446 20 WQV 2.5/10 105446 50 WQV 2.5/10 105446 50 WQV 2.5/10 105446 50 QL 10 033800 20
BS-M 2.5x4.5 106270 100
LS 2.8 105640 50 LS 2.8 105640 50 LS 2.8 105640 50 LS 2.8 105640 50 LS 2.8 105640 50
WAW 1 900450 1 WAW 1 900450 1 WAW 1 900450 1 WAW 1 900450 1 WAW 1 900450 1
WT 4 134106 100 WT 4 134106 100 WT 4 134106 100 WT 4 134106 100 WGB 5 105076 50
SF 10 033240 1000 SF 10 033240 1000 SF 10 033240 1000 SF 10 033240 1000 T5 034850 100 T5 034850 100
SG 10 033250 1000 SG 10 033250 1000 SG 10 033250 1000 SG 10 033250 1000 SF 10 033240 1000 SF 10 033240 1000
SG 10 033250 1000 SG 10 033250 1000
DEK 5 047346 500 DEK 5 047346 500 DEK 5 047346 500 DEK 5 047346 500 DEK 5 047346 500 DEK 047346 500
DEK 5 047356 500 DEK 5 047356 500 DEK 5 047356 500 DEK 5 047356 500 DEK 5 047356 500 DEK 047356 500
WS 8/5 164074 720 WS 8/5 164074 720 WS 8/5 164074 720 WS 12/5 160986 720 WS 12/5 160986 720 WS 12/5 160986 720
WS 8/5 158008 200 WS 8/5 158008 200 WS 8/5 158008 200 WS 12/5 144746 200 WS 12/5 144746 200 WS 12/5 144746 200
35
Feed through terminals WDU 1.5/R 3.5 WDK 1.5/R 3.5
W W
Pict. original size Pict. original size
Dimensions/Approvals arq arq
Width/length/height (mm) with TS 15 x 7.5 W 3.5/24.5/25 3.5/46.5/38.5
Insulation stripping length/screw size/screw slot size 7 (-1) mm/M 2/0.4 x 2.5 7 (-1) mm/M 2/0.4 x 2.5
Rated data to VDE 0611 Part 1/IEC 60 947-7-1
Rated voltage/rated current/rated cross-section 400 V/17.5 A/1.5 mm2 400 V/16 A/1.5 mm2
Rated impulse voltage/pollution severity 4 kV/3 4 kV/3
Further technical data
Tightening torque range Nm 0.27 0.27
Clampable conductor
Solid H07V-U mm2 0.5…1.5 0.5…1.5
Stranded H07V-R mm2 1.5 1.5
Flexible H07V-K mm2 0.5…1.5 0.5…1.5
Flexible and ferrules according to DIN 46 228/1 mm2 0.5…1.5 0.5…1.5
Flexible and ferrules with insulation collar mm2 0.5 0.5
Plug gauge according to IEC 60 947-7-1 Size A1 A1
UL/CSA rated data
Voltage/current/conductor size UL 300 V/10 A/26...14 AWG 300 V/10 A/26...14 AWG
Voltage/current/conductor size CSA 300 V/10 A/26...14 AWG 300 V/10 A/26...14 AWG
Ordering data Version W TS15 Cat. No. Qty. W TS15 Cat. No. Qty.
Beige Wemid WDU 1.5/R 3.5 175328 100 WDK 1.5/R 3.5 175329 100
Blue Wemid WDU 1.5/R 3.5 BL 175417 100 WDK 1.5/R 3.5 BL 175418 100
End plate/Partition Type Cat. No. Qty. Type Cat. No. Qty.
WAP (Thickness 1.5 mm) Beige Wemid WAP WDU 1.5/R3.5 175419 20 WAP WDK 1.5/R3.5 175420 20
Cross-connection
ZQV 2-pole ZQV 1.5/R3.5/2 GE 175421 60 ZQV 1.5/R3.5/2 GE 175421 60
3-pole ZQV 1.5/R3.5/3 GE 175422 60 ZQV 1.5/R3.5/3 GE 175422 60
4-pole ZQV 1.5/R3.5/4 GE 175423 60 ZQV 1.5/R3.5/4 GE 175423 60
5-pole ZQV 1.5/R3.5/5 GE 175424 20 ZQV 1.5/R3.5/5 GE 175424 20
6-pole ZQV 1.5/R3.5/6 GE 175425 20 ZQV 1.5/R3.5/6 GE 175425 20
7-pole ZQV 1.5/R3.5/7 GE 175426 20 ZQV 1.5/R3.5/7 GE 175426 20
8-pole ZQV 1.5/R3.5/8 GE 175427 20 ZQV 1.5/R3.5/8 GE 175427 20
9-pole ZQV 1.5/R3.5/9 GE 175428 20 ZQV 1.5/R3.5/9 GE 175428 20
10-pole ZQV 1.5/R3.5/10 GE 175429 20 ZQV 1.5/R3.5/10 GE 175429 20
30-pole ZQV 1.5/R3.5/30 GE 175430 10 ZQV 1.5/R3.5/30 GE 175430 10
Screwdriver
SDI SDI 0.4 x 2.5 900837 1 SDI 0.4 x 2.5 900837 1
Mounting rails, end brackets, further marking material see section “Accessories”
36
Feed through terminals AST 1 AST 4 AST 5 SAK 4 S/35
with tab connection SAK 4 SS/35
W-series
W W W W
Dimensions/Approvals
Width/length/height (mm) with TS 35 x 7.5 W 6.5/58/46 6.5/40/40 6.5/58/46 6.5/40/49.5
Insulation stripping length/clamping screw/screwdriver blade 9 mm/M 2.5/3.5 x 0.6 12 mm/M 3/3.5 x 0.6 12 mm/M 3/3.5 x 0.6
Rated data
Rated voltage/rated current/rated cross-section 500 V1)/ - /2.5 500 V1)/ - /2.5 500 V1)/ - /2.5 500 V1)/16 A/2.5
Rated voltage clamping yoke 2.5 mm2 4 mm2 4 mm2
Rated voltage 6.3/2.8 mm push-on tab 2.5 / 1 mm2 2.5 / 1 mm2 2.5 / 1 mm2 2.5 / 1 mm2
Rated impulse voltage VDE 0110/1.89/pollution severity 6 kV/3 6 kV/3 6 kV/3 6 kV/3
Further technical data
Tightening torque range Nm 0.4…0.7 0.5…1.0 0.5…1.0
Torque setting with DMS 2 electric screwdriver 1 2 2
Clampable conductor
Solid H07V-U mm2 0.5…4 0.5…6 0.5…6
Stranded H07V-R mm2 1.5…2.5 1.5…2.5 1.5…2.5
Flexible H07V-K mm2 0.5…2.5 0.5…4 0.5…4
Flexible H07V-K and ferrule according to DIN 46 228/1 mm2 0.5…2.5 0.5…4 0.5…4
Plug gauge according to IEC 60 947-7-1 Size A2 A4 A4
Continuous current of cross-connection 2-pole A (QL 2…10) 36 (QL 2…10) 36 (QL 2…10) 36 (QL 2…10) 36
UL/CSA rated data
Voltage/current/conductor size UL
Voltage/current/conductor size CSA
Ordering data Version W Cat. No. Qty. W Cat. No. Qty. W Cat. No. Qty. W Cat. No. Qty.
Slotted beige Wemid 069960 50 046040 100 066490 50 SAK 4 S 063030 100
Unslotted beige Wemid 066480 50 047940 100 069970 50 (screw-/tab-connection = s)
SAK 4 SS 063040 100
SAK 4 SS 064690 100
(tab-/tab-connection = ss)
End plate/Partition/Small partition (Thickness mm) Type Cat. No. Qty. Type Cat. No. Qty. Type Cat. No. Qty. Type Cat. No. Qty.
Beige Wemid AP (1.5) 026640 20 AP (1.5) 046049 20 AP (1.5) 026640 20 AP (1.5) 010510 20
Beige PA TSch 1 031916 100 TSch 1 031916 100 TSch 1 031916 100 TSch 1 031916 100
AP TSch
Cross-connection
2-pole Q2 033670 50 Q2 033670 50 Q2 033670 50 QL 2 013060 100
3-pole Q3 033680 50 Q3 033680 50 Q3 033680 50 QL 3 013070 100
4-pole Q4 033690 50 Q4 033690 50 Q4 033690 50 QL 4 013080 50
10-pole Q 10 036880 20 Q 10 036880 20 Q 10 036880 20 QL 10 033820 20
Plug adaptor
2-pole STA 2.5/2 016586 100
3-pole STA 2.5/3 016596 50
4-pole STA 2.5/4 019036 50
Only clips into PA version 5-pole STA 2.5/5 016606 50
Of AST 3 and AST 4 8-pole STA 2.5/8 016616 50
Test plug/Socket
Plug test socket without using QL for TS 32 StB 14 016860 50 StB 14 016860 50 StB 14 016860 50
Mounting rails, end brackets, further marking material see section “Accessories”
1)With insulating sleeve
2) Touch safe with ADP4 cover
37
Feed through terminals DLI 2.5 DLI 2.5 LD PNP DLI 2.5 LD NPN DLD 2.5
for initiators and actuators
W W W W
Group marking
WT 4 WT 4 134106 100 WT 4 134106 100 WT 4 134106 100 WT 4 134106 100
SF 10 033240 1000 SF 10 033240 1000 SF 10 033240 1000 SF 10 033240 1000
SG 10 033250 1000 SG 10 033250 1000 SG 10 033250 1000 SG 10 033250 1000
Cover
HP 4 ADP 048540 20 ADP 048540 20 ADP 048540 20 ADP 048540 20
HP 4 048586 20 HP 4 048586 20 HP 4 048586 20 HP 4 048586 20
38
DLA 2.5 DLA 2.5/D DLA 2.5/LD DLA 2.5/LD/D DLD 2.5/PE KDKS1 / PE
W-series
W W W W W W
250 V**/17.5 A/2.5 mm2 250 V**/17.5 A/2.5 mm2 5–30 V/17.5 A/2.5 mm2 5–30 V/17.5 A/2.5 mm2 250 V**/17.5 A/2.5 mm2 500 V / 6.3 A / 4 mm2
4 kV/3 4 kV/3 0.8 kV/3 0.8 kV/3 4 kV/3 6 kV/3
300 V/10 A/26…12 AWG 300 V/10 A/26…12 AWG 300 V/10 A/26…12 AWG 300 V/10 A/26…12 AWG 300 V/10 A/26…12 AWG -/-/22...12 AWG
300 V/10 A/26…12 AWG 300 V/10 A/26…12 AWG 5–30 V/10 A/26…12 AWG 5–30 V/10 A/26…12 AWG 300 V/10 A/26...12 AWG
W Cat. No. Qty. W Cat. No. Qty. W Cat. No. Qty. W Cat. No. Qty. W Cat. No. Qty. W Cat. No. Qty.
156597 100 159595 100 952811 50
157840 100 cannot be combined with
157843 100 DLI / DLA
157844 100 Wemid 953245 50
(LED red) 157847 100
(LED green) 157848 100
(without dekafix) 157838 10 (LED red) 157849 10
(with dekafix) 157839 10 (LED green) 157850 10
5 x 20 without indicator
Type Cat. No. Qty. Type Cat. No. Qty. Type Cat. No. Qty. Type Cat. No. Qty. Type Cat. No. Qty. Type Cat. No. Qty.
AP 131326 20 AP 131326 20 AP 131326 20 AP 131326 20 AP 159596 20 AP 950333 50
AP (part-AP) 159597 AP Wemid 953247 50
TSch 1 031916 100 TSch 1 031916 100 TSch 1 031916 100 TSch 1 031916 100 TSch 1 031916 100
QL 2 029720 100 QL 2 029720 100 QL 2 029720 100 QL 2 029720 100 QL 2 029720 100
VH 4.2 134580 100 VH 4.2 134580 100 VH 4.2 134580 100 VH 4.2 134580 100 VH 4.2 134580 100
VQB 1.5/50 BL 163328 5 VQB 1.5/50 BL 163328 5 VQB 1.5/50 BL 163328 5 VQB 1.5/50 BL 163328 5 VQB 1.5/50 BL 163328 5
VQB 1.5/50 RT 163329 5 VQB 1.5/50 RT 163329 5 VQB 1.5/50 RT 163329 5 VQB 1.5/50 RT 163329 5 VQB 1.5/50 RT 163329 5
VQB 1.5/50 SW 163512 5 VQB 1.5/50 SW 163512 5 VQB 1.5/50 SW 163512 5 VQB 1.5/50 SW 163512 5 VQB 1.5/50 SW 163512 5
WT 4 134106 100 WT 4 134106 100 WT 4 134106 100 WT 4 134106 100 WT 4 134106 100
SF 10 033240 1000 SF 10 033240 1000 SF 10 033240 1000 SF 10 033240 1000 SF 10 033240 1000
SG 10 033250 1000 SG 10 033250 1000 SG 10 033250 1000 SG 10 033250 1000 SG 10 033250 1000
ADP 048540 20 ADP 048540 20 ADP 048540 20 ADP 048540 20 ADP 048540 20
HP 4 048586 20 HP 4 048586 20 HP 4 048586 20 HP 4 048586 20 HP 4 048586 20
DEK 6 FW 046866 500 DEK 6 FW 046866 500 DEK 6 FW 046866 500 DEK 6 FW 046866 500 DEK 6 FW 046866 500 DEK 8 FW 127696 500
DEK 6 FS 046876 500 DEK 6 FS 046876 500 DEK 6 FS 046876 500 DEK 6 FS 046876 500 DEK 6 FS 046876 500 DEK 8 FS 128966 500
** If the cross-connection runs via the PE connection of the DLA, or if a pole is generally skipped, the nominal voltage is reduced to 30 Vac
*** For PE-connection
39
Feed through terminals VLI 1.5 VLI 1.5PE MAK 2.5
for initiators and motors
W W W
End plate/Partition Type Cat. No. Qty. Type Cat. No. Qty. Type Cat. No. Qty.
End plate AP VLI1.5 163326 20 AP VLI1.5/PE 163332 20 AP MAK2.5 161528 20
Partial end plate for VLI1.5 – MAK2.5 combination TEAP 2 MAK2.5 163333 20 TEAP 2 MAK2.5 163333 20
Partial end plate for VLI1.5 – VLI1.5PE combination TEAP VLI1.5 163327 20 TEAP VLI1.5 163327 20
Partial end plate for VLI1.5PE – MAK2.5 combination TEAP 1 MAK2.5 163334 20 TEAP 1 MAK2.5 163334 20
Cross-connection
VQB 50-pole, snap-fit, external cross-connection VQB1.5/50BL* 163328 5 VQB1.5/50BL* 163328 5 VQB1.5/50BL* 163328 5
VQB1.5/50RT* 163329 5 VQB1.5/50RT* 163329 5 VQB1.5/50RT* 163329 5
VQB1.5/50SW* 163512 5 VQB1.5/50SW* 163512 5 VQB1.5/50SW* 163512 5
QB 25 SW* 052000 20
QB 25-pole external cross-connection QB 25 RT* 052006 20
QB 25 BL* 052008 20
Group marking
40
41
W-series
Coloured terminal blocks WDU 2.5 WDU 4 WTR 2.5 WSI 6
V V
ZQ ZQ
W W W W
Max. technical data 32 A/4 mm2 46 A/6 mm2 16 A/1.5 mm2 6,3 A/-
Dimensions/Approvals a r i q GOST LR u DNV a r i q GOST LR u DNV a r i q GOST LR u DNV a r i q GOST LR u DNV
Width/length/height (mm) with TS 35 x 7.5 W 5/60/47 6/60/47 5/60/49 8/60/60
Insulation stripping length/clamping screw/screwdriver blade 10 mm/M 2.5/3.5 x 0.6 10 mm/M 3 /3.5 x 0.6 10 mm/M 2.5/3*/3.5 x 0.6 12 mm/M 3.5/4.0 x 0.8
Rated data VDE 0611 Part 1/8.92/IEC 60 947-7-1
Rated voltage/current/cross-section 800 V/24 A/2.5 mm2 800 V/32 A /4 mm2 800 V/16 A**/1.5 mm2 500 V~/6.3 A***/6 mm2
Rated impulse voltage/pollution severity 8 kV/3 8 kV/3 6 kV/3 6 kV/3
Further technical data see WDU 2.5 page 4 see WDU 4 page 7 see WTR 2.5 page 22 see WSI 6 page 27
UL/CSA rated data
Voltage/current/conductor size UL 600 V/25 A/22…12 AWG 600 V/35 A/22…10 AWG 300 V/10 A/22…12 AWG 300 V/10 A/20…8 AWG
Voltage/current/conductor size CSA 600 V/20 A/26…12 AWG 600 V/35 A/26…10 AWG 300 V/10 A/26…12 AWG 300 V/10 A/20…8 AWG
Ordering data Version W Cat. No. Qty. W Cat. No. Qty. without StB with 2 StB W Cat. No. Qty.
• Blue Wemid 102008 100 102018 100 101110 101120 100 101108 50
• Yellow Wemid 102002 100 102012 100 101118 101128 100 101102 50
• Green Wemid 102009 100 102016 100 101112 101122 100 101103 50
•
o
Grey Wemid
White Wemid
103772 100
103680 100
103780
103670
100
100 101115 101125 100
101105
101109
50
50
End plate/Partition
• Black PA
Type
102001 100
Cat. No. Qty. Type
102011
Cat. No.
100
Qty. 101111
101950
101121
100
100 Type
101101 50
Cat. No. Qty.
WAP (Thickness 1.5 mm)
• Beige Wemid WAP 2.5-10 105000 50 WAP 2.5-10 105000 50 Type Cat. No. Qty. WAP 2.5-10 105000 50
• Blue Wemid WAP 2.5-10 105008 50 WAP 2.5-10 105008 50 WAP 2.5-10 105000 50 WAP 2.5-10 105008 50
• Yellow Wemid WAP 2.5-10 105002 50 WAP 2.5-10 105002 50 WAP 2.5-10 105008 50 WAP 2.5-10 105002 50
• Green Wemid WAP 2.5-10 107220 50 WAP 2.5-10 107220 50 WAP 2.5-10 105002 50 WAP 2.5-10 107220 50
• Brown Wemid WAP 2.5-10 105007 50 WAP 2.5-10 105007 50 WAP 2.5-10 107220 50 WAP 2.5-10 105007 50
WTW
•
o
Grey Wemid
White Wemid
WAP 2.5-10
WAP 2.5-10
105005
105009
50
50
WAP 2.5-10
WAP 2.5-10
105005
105009
50
50
WAP 2.5-10
WAP 2.5-10
105007
105005
50
50
WAP 2.5-10
WAP 2.5-10
105005
105009
50
50
• Orange PA WAP 2.5-10 105006 50 WAP 2.5-10 105006 50 WAP 2.5-10 105009 50 WAP 2.5-10 105006 50
• Red PA WAP 2.5-10 105004 50 WAP 2.5-10 105004 50 WAP 2.5-10 105006 50 WAP 2.5-10 105004 50
• Violett PA WAP 2.5-10 107221 50 WAP 2.5-10 107221 50 WAP 2.5-10 105004 50 WAP 2.5-10 107221 50
• Black PA WAP 2.5-10 105001 50 WAP 2.5-10 105001 50 WAP 2.5-10 107221 50 WAP 2.5-10 105001 50
• Beige Wemid WTW 2.5-10 105010 20 WTW 2.5-10 105010 20 WAP 2.5-10 105001 50 WTW 2.5-10 105010 20
Cross-connection
• Blue Wemid WTW 2.5-10 105018
ZQV 2.5N Qty. WQV 2.5Qty.
20 WTW 2.5-10
ZQV4N
105018
Qty. WQV
20
Qty.
WTW 2.5-10
WTW 2.5-10
105010
105018
20
20
WTW 2.5-10 105018 20
WQV WQB 8/24 Screen lug LS 2.8 2-pole 169380 60 105366 50 175825 60 105196 50 QL 2 019430 50
3-pole 169381 60 105376 50 176263 60 105456 50 QL 2 021580 100 QL 3 019440 50
4-pole 169382 60 105386 50 176262 60 105466 50 QL 3 021590 100 QL 4 019450 50
10-pole 169388 20 105446 20 175826 20 105206 20 QL 4 021600 50 QL 10 033830 20
Notching tools: WQB B/24 157906 20 175827 10 (41-pole) QL 10 033800 20 BS-M 3 x 5 105210 100
WAW 1 for WQV LS 2.8 105640 50 LS 2.8 105640 50 BS-M 2.5 x 4.5 106270 100
WAW 2 to notch the punch-out in the terminal moulding WAW 1 900450 1 WAW 1 900450 1 WAW 2 900451 1
Test adaptor WAW 2 900451 1
WTA TA 1 WTA 2 163232 50 WTA 3 163235 50 Fuse cartridges 5 x 20 and
WTA 2/ZA 163233 50 WTA 3/ZA 163236 50 5 x 25 see page 52
WTA 2/10 163234 5 WTA 3/10 163237 5
Strain relief ZE 1 163215 50 ZE 1 163215 50
Test plug/Socket
PS 2.3 StB 8.5 PS 2.3 (ø 2.3) 018040 20 PS 2.3 (ø 2.3) 018040 20 PS 2.3 (ø 2.3) 018040 20
PS 2.3 (ø 2.3) 018040 20
StB 8.5 (ø 2.3) 021570 50 StB 8.5 (ø 2.3) 028060 50
Screwdriver SDIK for StB Cat. No.: 902493
Cover
WAD with symbol WAD 5 105346 50 WAD 5 105346 50
WAD white, for self-labeling WAD 5 white 105606 50 WAD 5 white 105606 50
Group marking
T5 WGB WGB 5 105076 50 WGB 5 105076 50 Diode plug
T5 034850 100 T5 034850 100 WSD 2.5 ( 105846 25
Tag carrier SF 10 033240 1000 SF 10 033240 1000 WSD 2.5 ) 105856 25
for S 10 tags SG 10 033250 1000 SG 10 033250 1000 WSD 2.51) 105866 25
Marking tags Print WSD 2.52) 105876 25
DEK Consecutive horizontal DEK 5 047346 500 DEK 6 046866 500 DEK 5 047346 500
DEK Consecutive vertical DEK 5 047356 500 DEK 6 046876 500 DEK 5 047346 500 DEK 5 047356 500
WS Blank WS 12/5 160986 720 WS 12/6 160990 600 DEK 5 047356 500 WS 12/6.5 160992 540
DEK WS WS Printed WS 12/5 160986 720
Mounting rails, end brackets, further marking material see section “Accessories” ) With wire bridge
1
* With StB 2.3 ** Rated current limited to 1 A when used with diode-plug *** Max. power loss 1.6 W ) Without special parts
2
42
W-series WDU 4 SL WDU 6 SL WDU 10 SL
V
spring loaded ZQ
W-series
13
W W W
16.7
x
Dimensions/Approvals
Width/length/height (mm) with TS 35 x 7.5 6/60/47 8/60/47 10/60/47
Width/length/height (mm) W+Y 6/60/52 8/60/52 10/60/52
Insulation stripping length/clamping screw/screwdriver blade 15 mm/M 3/3.5 x 0.6 16 mm/M 3.5/5.5 x 0.8 17 mm/M 4/6.0 x 1.0
Rated data IEC ESI IEC ESI IEC
Rated voltage/current/cross-section 500 V/32 A/4mm2 500 V/24 A 500 V/41 A/6mm2 500 V/36 A 500 V/57 A/10mm2
Rated impulse voltage/pollution severity 6 kV/3 6 kV/3 6 kV/3
Clampable conductor
Solid H07V-U mm2 0.5...4 0.5...6 1.5...10
Stranded H07V-R mm2 1.5...4 1.5...6 1.5...10
Flexible H07V-K mm2 0.5...4 0.5...6 1.5...10
Max. clamping range in mm2, Gauge pin to IEC 60 947-1 Size 0.13...6 A4 0.5...10 A4 1.31...10 A5
Hooktight cable shoes to ESI 50-18 part 2
Size 2 (x = 3 mm) 2 Pieces 0.28...1.5 0.28...1.5/1...2.5 0.28...1.5/1...2.5 / 2.5...6
Size 1 (x = 4.6 mm) 2 Pieces 0.28...1.5/1...2.5 0.28...1.5/1...2.5 / 2.5...6
Ordering data Versions IEC Qty. ESI IEC Qty. ESI IEC Qty.
W Beige Wemid 953744 0000 50 953746 0000 50 953748 0000 50
W + Y Beige Wemid 953745 0000 50 953747 0000 50 953749 0000 50
W PA 66 black 953750 0000 50 953742 0000 50 953740 0000 50
W + Y PA 66 black 953751 0000 50 953743 0000 50 953741 0000 50
End plate/Partition Type Cat. No. Qty. Type Cat. No. Qty. Type Cat. No. Qty.
WAP Thickness 1.5 mm Wemid WAP 2.5-10 105000 50 WAP 2.5-10 105000 50 WAP 2.5-10 105000 50
WTW Wemid WTW 2.5-10 105010 20 WTW 2.5-10 105010 20 WTW 2.5-10 105010 20
WAP PA 66 black WAP 105001 50 WAP 105001 50 WAP 105001 50
WTW PA 66 black WTW 105011 20 WTW 105011 20 WTW 105011 20
Cross-connection
WQV WQV 4/2 105196 50 WQV 6/2 105236 50 WQV 10/2 105256 50
WQV 4/3 105456 50 WQV 6/3 105476 50 WQV 10/3 105496 50
WQV 4/4 105466 50 WQV 6/4 105486 50 WQV 10/4 105506 50
WQV 4/10 105206 20 WQV 6/10 105226 20 WQV 10/10 105246 20
Notching tool WAW 1 for WQV WAW1 900450 1 WAW1 900450 1 WAW1 900450 1
ZQV ZQV 4N/2 175825 60
ZQV 4N/3 176263 60
ZQV 4N/4 176262 60
ZQV 4N/10 175826 20
ZQV 4N/41 175827 10
Test adaptor
WTA 5 WTA 3 WTA 3 163235 50 WTA 5/1 105126 25 WTA 5/1 105126 25
WTA 3/ZA 163236 50
WTA 3/10 163237 5
ZE 1 163215 25
Test plug/Socket
PS 2.3 StB 8.5 PS 2.3 (ø 2.3) 018040 20 PS 2.3 (ø 2.3) 018040 20 PS 2.3 (ø 2.3) 018040 20
PS 4 (ø 4) 029960 20 PS 4 (ø 4) 029960 20
StB 8.5 (ø 2.3) 028060 50 StB 8.5 (ø 2.3) 028060 50 StB 8.5 (ø 2.3) 028060 50
StB 14 (ø 4) 016990 50 StB 14 (ø 4) 016990 50
Cover
WAD with symbol WAD 5 105346 50 WAD 8 105356 50 WAD 8 105356 50
WAD white WAD 5 white 105606 50 WAD 8 white 105616 50 WAD 8 white 105616 50
Group marking
WGB WGB 5 105076 50 WGB 8 105096 50 WGB 8 105096 50
T5 T5 034850 100 T5 034850 100 T5 034850 100
Tag carrier SF 10 033240 1000 SF 10 033240 1000 SF 10 033240 1000
for S 10-tags SG 10 033250 1000 SG 10 033250 1000 SG 10 033250 1000
Marking tags Print
DEK Consecutive horizontal DEK 6 046866 500 DEK8 127696 500 DEK 5 047346 500
DEK Consecutive vertical DEK 6 047356 500 DEK 8 128966 500 DEK 5 047356 500
WS Blank WS 12/6 160990 600 WS 12/6.5 160992 540 WS 12/6.5 160992 540
DEK WS WS Printed WS 12/6 144766 200 WS 12/6.5 156895 100 WS 12/6.5 156895 100
Note: Stripping lengths are given for direct entry conductors, whereas with hook bladed crimps the stripping lengths should be according to the crimp manufacturers recommandations.
43
W-series WTL 6 SL WTD 6 SL
spring loaded
W W
Dimensions/Approvals
Width/length/height (mm) with TS 35 8/83/50 8/83/50
Width/length/height (mm) W+Y 8/83/49 8/83/49
Insulation stripping length/clamping screw/screwdriver blade 16 mm/M 3.5/5.5 x 0.8 16 mm/M 3.5/5.5 x 0.8
Clampable conductor
Solid H07V-U mm2 0.5...6 0.5...6
Stranded H07V-R mm2 1.5...6 1.5...6
Flexible H07V-K mm2 0.5...6 0.5...6
Max. clamping range in mm2 0.5...10 0.5...10
Plug gauge according to IEC 60 947-1 A4 A4
Ordering data Version Type Cat. No. Qty. Type Cat. No. Qty.
W Beige Wemid WTL 6 SL 953807 0000 50 WTD 6 SL 953809 0000 50
W Blue Wemid
W + Y Beige Wemid WTL 6 SL 953808 0000 50 WTD 6 SL 953810 0000 50
W Black PA 66 WTL 6 SL 953802 0000 50 WTD 6 SL 953804 0000 50
W + Y Black PA 66 WTL 6 SL 953803 0000 50 WTD 6 SL 953805 0000 50
End plate/Partition
WAP Beige Wemid WAP 953811 20 WAP 953811 20
WAP Black PA 66 WAP 953806 20 WAP 953806 20
Cross-connection
QL2 2-pole 019430 50 019430 50
QL3 3-pole 019440 50 019440 50
QL4 4-pole 019450 50 019450 50
QL10 10-pole 033830 20 033830 20
BS 25 Blank 033470 100 033470 100
VH 19 031800 100 031800 100
QVS 2 030730 20 030730 20
QVSK 2 167036 20 167036 20
QVS 3 032930 20 032930 20
QVS 4 030740 20 030740 20
Test adaptor
PS 4 029960 20 029960 20
Test plug/Socket
StB 25 GE 026720 50
StB 25 GN 027120 50
StB 25 VI 027130 50
StB 35 GE 038900 50
StB 35 GN 038890 50
StB 35 VI 038910 50
StB 14 016990 50
Disconnect lock
SSP 3 053176 100
44
W-series WTR 4 SL WTR 4 SI SL
V V
spring loaded ZQ ZQ
W-series
W W
Dimensions/Approvals
Width/length/height (mm) with TS 35 6/60/47 6/60/52
Width/length/height (mm) W+Y
Insulation stripping length/clamping screw/screwdriver blade 12.5/M3/3.5 x 0.6 12.5/M3/3.5 x 0.6
Rated data
Rated voltage/current/cross-section 500 V/24 A/4mm2 400 V/6.3* A/4mm2
Rated impulse voltage/pollution severity 6 kV/3 6 kV/3
Clampable conductor
Solid H07V-U mm2 0.5...4 0.5...4
Stranded H07V-R mm2 1.5...4 1.5...4
Flexible H07V-K mm2 0.5...4 0.5...4
Max. clamping range in mm2 0.13...6 0.13...6
Plug gauge according to IEC 60 947-1 A4 A4
Ordering data Version with StB2.3 without StB Qty. without StB Qty.
W Beige Wemid WTR 4 SL 791030 0000 791027 0000 50 WTR 4 SI SL 791033 0000 50
W Blue Wemid WTR 4 SL 791031 0000 791028 0000 50
W Black PA 66 WTR 4 SL 791032 0000 791029 0000 50 WTR 4 SI SL 791035 0000 50
W + Y Beige Wemid WTR 4 SL 791039 0000 791036 0000 50 WTR 4 SI SL 791042 0000 50
W + Y Blue Wemi WTR 4 SL 791040 0000 791037 0000 50
W + Y Black PA 66 WTR 4 SL 791041 0000 791038 0000 50 WTR 4 SI SL 791044 0000 50
End plate/Partition
WAP Beige Wemid WAP 105000 50 WAP 105000 50
WAP Black PA 66 WAP 105001 50 WAP 105001 50
WAP Blue Wemid WAP 105008 50 WAP 105008 50
WTW Beige Wemid WTW 105010 20 WTW 105010 20
Cross-connection
ZQV 2-pole ZQV 4N/2 175825 60 ZQV 4N/2 175825 60
3-pole ZQV 4N/3 176263 60 ZQV 4N/3 176263 60
4-pole ZQV 4N/4 176262 60 ZQV 4N/4 176262 60
10-pole ZQV 4N/10 175826 20 ZQV 4N/10 175826 20
41-pole ZQV 4N/41 175827 10 ZQV 4N/41 175827 10
Blank QB 75/6.2/15 053520 10 QB 75/6.2/15 053520 10
ISPF QB75 SW 052670 10 ISPF QB75 SW 052670 10
ISPF QB75 BL 052678 10 ISPF QB75 BL 052678 10
ISPF QB75 RT 052676 10 ISPF QB75 RT 052676 10
Test adaptor
PS 2.3 018040 20 018040 20
Test adaptor WTA 6 163238 25 163238 25
45
Terminal blocks
with electronic components
Incorporating electronic components into a Terminal blocks with diodes Compensating terminals
rail-mounted terminal makes the connec-
for suppressing inductivity or for linking In measurement, control and regulation
tion point an active part of the installation.
signals. technology various cable lengths and
The unused space within a terminal can
tolerances in the sensors necessitate
be sensibly used for a signal display, for
Typical application: matching of the circuits. For this we offer a
suppressing sparks, or for signal conditi-
combination of rail-mounted terminal and
oning. • Eliminating sparks on switching a
potentiometer: the SAKL 4.
DC valve
Weidmüller’s range principally covers:
The electromagnetic energy stored in the Typical application:
Terminal blocks with indicator coil fades through the diode on opening
• Temperature measurement
the contact.
to display the switching state, signals and
the operating voltage. Signals simplify the
start-up process, monitoring, servicing and
repairs.
The range of terminals covers double-ter-
minals for voltage/current monitoring, fuse
terminals with outage displays and dis-
connect signal for disconnection.
Signals consist of various coloured LED’s,
Typical example:
glow lamps (low consumption) or regular A further variation provides a voltage dis-
bulbs. • Protecting contacts on switch an tributor in a terminal block.
inductive AC load
Typical application:
A varistor limits the peak voltage on
• Monitoring a ventilator motor switching off the load.
Displaying the current flow shows the This prevents arcing and related burning of
operating status ventilator. the contacts.
Specifications:
Weidmüller terminal blocks with electronic
components are engineered and manufac-
tured in accordance with
Typical example:
DIN VDE 0160:
• Test switch for LED display panels
Equipment of power-line installations with
The primary resistors for the LED are inte- electronic components
grated into the terminal. Two diodes
Typical example: DIN VDE 0110/79:
decouple control and test signals.
• Protecting a power supply Rated insulation voltage
A lit LED shows a tripped fuse, whereby a DIN VDE 0611 T.1/IEC 60 947-7-1:
small residual current is flowing trough the
Requirements for terminal blocks with
terminal.
screw-type or screwless clamping points
46
Terminal blocks WDK 2.5 LD WDK 2.5 LD WDK 2.5 LD WDK 2.5 LD WDK 2.5 GL
with indicator
W-series
Direct voltage indicator Direct voltage indicator Direct voltage indicator Alternating voltage indicator Alternating voltage indicator
Dimensions mm
Length 69 69 69 69 69
Height (TS 35 x 7.5) W 63 63 63 63 63
Terminal width
(+ 0.2 assembly tolerance) 5 5 5 5 5
Insulating stripping length 10 10 10 10 10
Connection data
Screw connection, flexible 0.5…2.5 mm2 0.5…2.5 mm2 0.5…2.5 mm2 0.5…2.5 mm2 0.5…2.5 mm2
Conductor cross-connection AWG 26…12 AWG 26…12 AWG 26…12 AWG 26…12 AWG 26…12
Voltage/Indicator Type Cat. No. Type Cat. No. Type Cat. No. Type Cat. No. Type Cat. No.
24 V–/LED red WDK 2.5 LD 802363 WDK 2.5 LD 102360 WDK 2.5 LD 801905
24 V–/LED green WDK 2.5 LD 801004 WDK 2.5 LD 802361 WDK 2.5 LD 816143
115 V~/LED red WDK 2.5 LD 800632
230 V~/LED red WDK 2.5 LD 801314
230 V~/Neon lamp WDK 2.5 GD 801384
Accessories Type Cat. No. Qty. Type Cat. No. Qty. Type Cat. No. Qty. Type Cat. No. Qty. Type Cat. No. Qty.
Mounting rail (2 m long) TS 35 x 7.5 038340 2m TS 35 x 7.5 038340 2m TS 35 x 7.5 038340 2m TS 35 x 7.5 038340 2m TS 35 x 7.5 038340 2m
slotted 051450 2m slotted 051450 2m slotted 051450 2m slotted 051450 2m slotted 051450 2m
TS 35 x 15 049800 2m TS 35 x 15 049800 2m TS 35 x 15 049800 2m TS 35 x 15 049800 2m TS 35 x 15 049800 2m
End bracket
EW 35 (Thickness 8.5 mm) EW 35 038356 50 EW 35 038356 50 EW 35 038356 50 EW 35 038356 50 EW 35 038356 50
End plate
WAP (Thickness 1.5 mm) WAP 105910 100 WAP 105910 100 WAP 105910 100 WAP 105910 100 WAP 105910 100
Cross-connection
(preassembled) 2-pole WQV 2.5 105366 50 WQV 2.5 105366 50 WQV 2.5 105366 50 WQV 2.5 105366 50 WQV 2.5 105366 50
3-pole WQV 2.5 105376 50 WQV 2.5 105376 50 WQV 2.5 105376 50 WQV 2.5 105376 50 WQV 2.5 105376 50
4-pole WQV 2.5 105386 50 WQV 2.5 105386 50 WQV 2.5 105386 50 WQV 2.5 105386 50 WQV 2.5 105386 50
10-pole WQV 2.5 105446 50 WQV 2.5 105446 50 WQV 2.5 105446 50 WQV 2.5 105446 50 WQV 2.5 105446 50
Marking tags
Print
DEK Consecutive horizontal DEK 5 047346 500 DEK 5 047346 500 DEK 5 047346 500 DEK 5 047346 500 DEK 5 047346 500
DEK Consecutive vertical DEK 5 047356 500 DEK 5 047356 500 DEK 5 047356 500 DEK 5 047356 500 DEK 5 047356 500
WS Blank WS 8/5 164074 720 WS 8/5 164074 720 WS 8/5 164074 720 WS 8/5 164074 720 WS 8/5 164074 720
WS Printed WS 8/5 158008 200 WS 8/5 158008 200 WS 8/5 158008 200 WS 8/5 158008 200 WS 8/5 158008 200
DEK WS
Mounting rails, end brackets, further marking material see section “Accessories”
47
Terminal blocks WDK 2.5 D WDK 2.5 D WDK 2.5 D
with diodes Diode terminal e. g. as reverse Arc suppression circuit Arc suppression circuit
polarity protection for contactors and solenoid for contactors and solenoid
(Other versions on request) valves (DV) valves (DV)
Dimensions
Length mm 69 69 69
Height (with TS 35 x 7.5) mm W 63 63 63
Terminal width (+ 0.2 assembly tolerance) mm 5 5 5
Insulating stripping length mm 10 10 10
Connection data
Screw connection, flexible 0.5…2.5 mm2 0.5…2.5 mm2 0.5…2.5 mm2
Conductor cross-connection AWG 26…12 AWG 26…12 AWG 26…12
Terminal colour
beige beige beige
Ordering data Type Cat. No. Type Cat. No. Type Cat. No.
WDK 2.5 D 802561 WDK 2.5 D 102340 WDK 2.5 D 102330
Accessories Type Cat. No. Qty. Type Cat. No. Qty. Type Cat. No. Qty.
Mounting rail (2 m long) TS 35 x 7.5 038340 2 m TS 35 x 7.5 038340 2 m TS 35 x 7.5 038340 2 m
slotted 051450 2m slotted 051450 2m slotted 051450 2m
TS 35 x 15 049800 2m TS 35 x 15 049800 2m TS 35 x 15 049800 2m
End bracket
EW 35 (Thickness 8.5 mm) EW 35 (8.5) 038356 50 EW 35 (8.5) 038356 50 EW 35 (8.5) 038356 50
End plate
WAP (Thickness 1.5 mm) WAP 105910 100 WAP 105910 100 WAP 105910 100
Cross-connection (preassembled)
2-pole WQV 2.5 105366 50 WQV 2.5 105366 50 WQV 2.5 105366 50
3-pole WQV 2.5 105376 50 WQV 2.5 105376 50 WQV 2.5 105376 50
4-pole WQV 2.5 105386 50 WQV 2.5 105386 50 WQV 2.5 105386 50
10-pole WQV 2.5 105446 50 WQV 2.5 105446 50 WQV 2.5 105446 50
48
WDK 2.5 D WDK 2.5 D WDK 2.5 D
W-series
Diode terminal Diode terminal Diode terminal
for lamp test circuits for lamp test circuits for lamp test circuits
"
69 69 69
63 63 63
5 5 5
10 10 10
Type Cat. No. Qty. Type Cat. No. Qty. Type Cat. No. Qty.
TS 35 x 7.5 038340 2 m TS 35 x 7.5 038340 2 m TS 35 x 7.5 038340 2 m
slotted 051450 2m slotted 051450 2m slotted 051450 2m
TS 35 x 15 049800 2m TS 35 x 15 049800 2m TS 35 x 15 049800 2m
49
Terminal blocks WDK 2.5 D WDK 2.5 D
with electronic components Diode terminal Diode terminal
for lamp test circuits, for lamp test circuits,
(Other versions on request) with series resistor with series resistor
Dimensions
Length mm 69 69
Height (with TS 35 x 7.5) mm W 63 63
Terminal width (+ 0.2 assembly tolerance) mm 5 5
Insulating stripping length mm 10 10
Connection data
Screw connection, flexible 0.5…2.5 mm2 0.5…2.5 mm2
Conductor cross-connection AWG 26…12 AWG 26…12
End bracket
EW 35 (Thickness 8.5 mm) EW 35 (8.5) 038356 50 EW 35 (8.5) 038356 50
End plate
WAP (Thickness 1.5 mm) WAP 105910 100 WAP 105910 100
Cross-connection (preassembled)
2-pole WQV 2.5 105366 50 WQV 2.5 105366 50
3-pole WQV 2.5 105376 50 WQV 2.5 105376 50
4-pole WQV 2.5 105386 50 WQV 2.5 105386 50
10-pole WQV 2.5 105446 50 WQV 2.5 105446 50
50
Compensating terminals WDUL 4/...
W-series
Dimensions
Length mm 60
Height (with TS 35 x 7.5) mm 47
Terminal width (+ 0.2 assembly tolerance) mm 6
Insulating stripping length mm 9/10
Connection data
Screw connection, solid 0.5…4 mm2
Screw connection, flexible 0.5…4 mm2
Accessories
Ambient temperature in °C
51
Fuses and gauge rings
for Weidmüller fuse terminals
Fuse inserts
for terminal type Size (mm) Rated voltage (Vac) Rated current (A) Cat. No Qty.
G fuse inserts 5 x 20 without indicator to DIN 41660, IEC 127 part 1
Note: 1) The SIBA company also supplies 5 x 25 G fuse inserts with indicator in a shipbuilding model for 450 V~.
2) 5 x 30 (500 V~) fuse inserts for SAKS 3 are available from the WICKMANN company.
3) The LINDNER company also supplies Neozed-fuse cartridges in an additional shipbuilding model for 440 V~.
4) Fuse cartridges with the dimension 1" x 1/4" c 25.4 x 6.35 mm and 13/32" x 11/2" c 10.3 x 38.1 mm are not included in
product line.
5) Only for SAKS 1 and SAKS 7.
Gauge rings
For terminal type Gauge ring type Amp. Colour Cat. No. Qty.
SAKS 4 and 4/35 P 14/2 2 pink 013800 50
P 14/4 4 brown 013810 50
P 14/6 6 green 032860 50
P 14/10 10 red 032870 50
52
53
W-series