Professional Documents
Culture Documents
Our mission at Universal Flow (UF), is to provide a quality product at a competitive price
and to meet the needs and requirements of our customers in a timely manner. UF valves are
designed, manufactured and tested under strict quality control to meet and exceed all industry
standards to which they are constructed. UF valves are fully traceable with chemical, physical
and pressure test records.
Universal Flow offers a wide variety of industrial and commercial valves using carbon, alloy
and stainless steels. Standard sizes range from 1/2” to 36” in diameter, with pressure ratings
from ASME class 150 to class 4500 and API 2000 to 20000.
This catalog contains basic dimensions and specifications for UF valves. Every effort has
been made for technical accuracy in the development of this catalog. The designs and
materials offered may vary in accordance with our continuing product design improvements.
www.ufvalve.com 1
UF
2 www.ufvalve.com
UF
TABLE OF CONTENTS
www.ufvalve.com 3
UF
HOW TO ORDER
(1) (2) (3) (4) (5) (6) (7) (8) (9) (x)
Two Piece Reduced Bore 01 150 01 WCB CS with 1 RF 1 DELRIN 1 BUNA 1 Lever Op. X Special
A 1 01
Side Entry Short Pattern 03 300 02 A105 1MIL ENP 2 RTJ 2 PTFE 2 *VITON B 2 Gear Op.
Three Piece Reduced Bore 06 600 03 CF8 CS with 3 WE 3 RTPFE 3 *EPDM Lever Op. w/
P 2 02 3
Side Entry Long Pattern 3MIL ENP Lock Device
09 900 04 F304 4 SW 4 NYLON 4 *AFLAS
Full Bore LowTemp CS Gear Op. w/
T Top Entry 3 15 1500 05 CF8M 03 5 NPT 5 PEEK(HT4) 5 *HNBR 4
Short Pattern w/ 3MIL ENP Lock Device
25 2500 06 F316 6 WExRF 6 DEVLON V
Full Bore 04 F316 5 Bare Stem
W Welded 4
Long Pattern 45 4500 07 CF3
05 CF8M
7 WExRTJ 7 KEL F
6 Actuated
20 2000 08 F304L 8 HUB
5 Special Bore 06 F304
30 3000 09 CF3M
07 CF8
50 5000 10 F316L
08 F304L
A1 10000 11 LCB
09 CF3
A2 15000 12 LF2 CL2
10 F316L
A3 20000 13 F51
11 CF3M
14 4A
12 13%Cr
99 Special
13 MONEL
14 Hastelloy
15 F51
99 Special
Example: A 4 01 02 04 1 2 2 1 X
Notes: 1. Design and construction details are subject to change without notice.
2. Other materials available upon request. See pages 8 and 44.
4 www.ufvalve.com
UF
APPLICABLE SPECIFICATIONS
UF ball valves are designed, manufactured and tested in accordance with API, ANSI, ASME, MSS,
NACE and BS requirements. The following list contains the most important applicable standards
for ball valves. UF valves may be produced in accordance with other international standards upon
request.
API - American Petroleum Institute
• API Spec 6D Pipeline Valves (Gate, Plug, Ball, And Check Valves)
• API Spec 6A Wellhead And Christmas Tree Equipment
• API Spec 6FA Fire Test for Valves
• API Std 598 Valve Inspection And Test
• API Std 607 Fire Test For Soft-Seated Quarter-Turn Valves
• API Spec Q1 Specification for Quality Programs for the Petroleum and Natural Gas Industry
ASME - The American Society of Mechanical Engineers
• ASME B16.5 Pipe Flanges And Flanged Fittings
• ASME B16.10 Face-To-Face And End-To-End Dimensions Of Ferrous Valves
• ASME B16.25 Butt-Welding Ends
• ASME B16.34 Steel Valves, Flanged And Butt-Welding End
BSI - British Standards Institute
• BS 5351 Steel Ball Valves For The Petroleum, Petrochemical, And Allied Industries
• BS 6755 Testing of Valves
• BS 5146 Inspection and Test of Valves
• BS 1503:1989 Specification For Steel Forgings For Pressure Purposes
• BS 2080:1989 Specification for face-to-face, center-to-face, end-to-end and
center-to-end Dimensions of valves
• BS 1560 Steel Pipe Flanges and Flanged Fittings for the Petroleum Industry
• BS 4504 Flanges and Bolting for Pipes, Valves and Fittings
www.ufvalve.com 5
UF
DESIGN FEATURES
Anti-Static Device
Spring loaded pins are installed on the stem and ball to ensure electrical continuity
between the valve components.
Fire-Safe Design
All valves are fire safe in accordance with API 607 and API 6FA requirements.
6 www.ufvalve.com
UF
DESIGN FEATURES
Extended Stem
When ball valves are to be installed underground, stem extensions can be provided
per customer’s specifications. Drain and lube lines with grease injectors will be
piped up to the top of the extension for easy access. The distance between the
centerline of the bore and the operator handwheel, must be specified. Low
temperature/Cryogenic service special valve designs are also available with
extended gas columns for applications below -50°F.
Pup Ends
Butt weld end valves may be supplied with transition pieces (PUPS) to
minimize any risk of seat and seal damage during welding and post weld heat
treatment operations. The length of pups and matching pipe details must be
specified.
www.ufvalve.com 7
UF
PARTIAL LIST OF AVAILABLE MATERIALS
DESCRIPTION MATERIALS
1. Carbon Steel: ASTM A216-WCB, ASTM A105
BODY, GLAND, ADAPTER, 2. Low Temp. Carbon Steel: ASTM A352-LCB, ASTM A350-LF2 CL2
TRUNNION COVER, CONNECTOR 3. Stainless Steel: ASTM A351-CF8M, ASTM A182-F316
4. Duplex Stainless Steel: ASTM A182 F51, ASTM A995 4A
1. Carbon Steel with 1MIL ENP
2. Carbon Steel with 3MIL ENP
3. Low Temp. Carbon Steel with 3MIL ENP
4. ASTM A182-F316, ASTM A351-CF8M
BALL, STEM, TRUNNION 5. ASTM A182-F6A
SEAT RETAINER 6. ASTM B564 MONEL
7. ASTM B574 HASTELLOY
8. ASTM A182 F51
9. ASTM A182 F53
10.ASTM A182 F55
1. ASTM A193-B7/A194-2H 4. ASTM A193-B8/A194-8
BOLTING 2. ASTM A320-L7/A194 5. ASTM A193-B8M/A194-8M
3. ASTM A193-B7M/A194-2HM 6. ASTM A320-L7M/A194-7M
1. Carbon Steel with PTFE lined
TRUNNION BEARING 2. Epoxy with PTFE lined
3. Stainless Steel with PTFE lined
1. 316SS Spiral Wound Graphite 6. Solid Graphite
2. 316SS Spiral Wound PTFE 7. VITON A
GASKET 3. Monel Spiral Wound PTFE 8. AFLAS (AED)
4. TEFLON 9. EPDM (AED)
5. BUNA N
1. DELRIN 5. PEEK (HT4)
2. PTFE 6. DEVLON
SEAT INSERT
3. NYLON
4. RPTFE
1. BUNA N 5. AFLAS (AED)
2. VITON B (AED) 6. NITRIL w/ MTBE
SEALS
3. EPDM (AED) 7. HNBR
4. PTFE
THRUST BEARING, 1. PTFE
THRUST WASHER 2. NYLON
1. Stainless Steel 17-7PH
SEAT SPRING
2. Inconel X-750
1. Carbon Steel
INJECTION FITTINGS
2. Stainless Steel AISI 316
1. Carbon Steel
BLEED VALVE
2. Stainless Steel AISI 316
1. Carbon Steel
KEY, PIN
2. Stainless Steel
1. Cast Iron Case, Carbon Steel Worm & Segment Gear
GEAR OPERATOR
2. Cast Steel Case, Carbon Steel Worm & Segment Gear
8 www.ufvalve.com
UF
STANDARD MATERIAL PARTS LIST
www.ufvalve.com 9
UF
CONSTRUCTION PER SIZE RANGE
1
2
3
4
SEAT SPRING
SEAT O-RING
SEAT HOLDER
SEAT INSERT
4” AND BELOW
DN.100
5 PIN
6 CAP SCREW
7 TRUNNION
8 TRUNNION PLATE
9 FIRE-SAFE GASKET
10 O-RING
11 BODY
12 BEARING
13 WASHER
14 O-RING
15 BODY STUD
16 BODY NUT
17 CLOSURE
18 BALL
19 BEARING
20 WASHER
21 O-RING
22 FIRE-SAFE GASKET
23 O-RING
24 LEVER
6” - 12”
25 FIRE-SAFE GASKET
26 STEM KEY
27 STEM INJECTION FITTING
28 SEAT INJECTION FITTING
29 GEAR BOX DN.150 - 300
30 STEM
31 GLAND ADAPTER
32 ANTI-STATIC DEVICE
33 GLAND
34 FIRE-SAFE GASKET
35 FIRE-SAFE GASKET
36 BLEED VALVE
37 DRAIN PLUG
38 SEAT PLATE
39 LIFTING LUG
40 SUPPORT LEG
41 CHECK VALVE
10 www.ufvalve.com
UF
EXPLODED VIEWS
1
2
3
4
SEAT SPRING
SEAT O-RING
SEAT HOLDER
SEAT INSERT
4” AND BELOW
DN.100
5 PIN
6 CAP SCREW
7 TRUNNION
8 TRUNNION PLATE
9 FIRE-SAFE GASKET
10 O-RING
11 BODY
12 BEARING
13 WASHER
14 O-RING
15 BODY STUD
16 BODY NUT
17 CLOSURE
18 BALL
19 BEARING
20 WASHER
21 O-RING 24
22 FIRE-SAFE GASKET
23 O-RING 33
24 LEVER
25 FIRE-SAFE GASKET 9
26 STEM KEY
27 STEM INJECTION FITTING
5 31
28 SEAT INJECTION FITTING
29 GEAR BOX
27 25
30 STEM
31 GLAND ADAPTER
20 23
32 ANTI-STATIC DEVICE
33 GLAND 36 17
34 FIRE-SAFE GASKET 30 22
35
36
FIRE-SAFE GASKET
BLEED VALVE 26 14
37 DRAIN PLUG
1
38 SEAT PLATE 19 38
39 LIFTING LUG 9
40 SUPPORT LEG 32 2
41 CHECK VALVE 3
18 4
11
37
13
12
10
35
6 7
28
41
15
16
11
Construction may vary depending on the pressure class.
Email info@ufvalve.com for more details.
www.ufvalve.com
UF
EXPLODED VIEWS
6” - 12”
1 SEAT SPRING
2 SEAT O-RING
3 SEAT HOLDER
4 SEAT INSERT
5 PIN DN.150 - 300
6 CAP SCREW
7 TRUNNION
8 TRUNNION PLATE
9 FIRE-SAFE GASKET
10 O-RING
11 BODY
12 BEARING
13 WASHER
14 O-RING
15 BODY STUD
16 BODY NUT
17 CLOSURE
18 BALL
19 BEARING
20 WASHER
21 O-RING
22 FIRE-SAFE GASKET
23 O-RING
24 LEVER
25 FIRE-SAFE GASKET 33
26 STEM KEY
27 STEM INJECTION FITTING 9
28 SEAT INJECTION FITTING
29 GEAR BOX 27 31
30 STEM
31 GLAND ADAPTER 25 23
32 ANTI-STATIC DEVICE
33 GLAND 13 36
34 FIRE-SAFE GASKET
17
35 FIRE-SAFE GASKET 30 22
36 BLEED VALVE 14
37 DRAIN PLUG 26 1
38 SEAT PLATE 38
39 LIFTING LUG 19 9
40 SUPPORT LEG 2
41 CHECK VALVE 18 3
11 4
37
13
12
10
35
6 7
41
28
15
16
12
Construction may vary depending on the pressure class.
Email info@ufvalve.com for more details.
www.ufvalve.com
UF
EXPLODED VIEWS
1
2
3
4
SEAT SPRING
SEAT O-RING
SEAT HOLDER
SEAT INSERT
14” AND ABOVE
DN.350
5 PIN
6 CAP SCREW
7 TRUNNION
8 TRUNNION PLATE
9 FIRE-SAFE GASKET
10 O-RING
11 BODY
12 BEARING
13 WASHER
14 O-RING
15 BODY STUD
16 BODY NUT
17 CLOSURE
18 BALL
19 BEARING
6
20 WASHER
21 O-RING 9
22 FIRE-SAFE GASKET 33
23 O-RING 31
24 LEVER 27
25 FIRE-SAFE GASKET 23
26 STEM KEY 25
27 STEM INJECTION FITTING 30 36
28 SEAT INJECTION FITTING 20
29 GEAR BOX 8
30 STEM 26
31 GLAND ADAPTER 17
32 ANTI-STATIC DEVICE 32 22
33 GLAND 14
34 FIRE-SAFE GASKET 19 1
35 FIRE-SAFE GASKET
20 38
36
37
BLEED VALVE
DRAIN PLUG
9
38 SEAT PLATE
2
39 LIFTING LUG 3
40 SUPPORT LEG 4
41 CHECK VALVE 37
18 11
13
12
8
28
41
15
16
13
Construction may vary depending on the pressure class.
Email info@ufvalve.com for more details.
www.ufvalve.com
UF
DIMENSIONS & WEIGHTS - CLASS 150
A
SIZE WEIGHT B B1 C D E F G H I
RF RTJ WE
NPS DN (lb) (in) (in) (in) (in) (in) (in) (in) (in) (in) (in) (in) (in)
2x 1 ½ 50x40 55 7 7 1/2 8 1/2 1 1/2 2 6 5 1/2 3 3/4 5 11/16 17 11/16 -- --
2 50 62 7 7 1/2 8 1/2 2 2 6 6 4 1/8 6 17 11/16 -- --
3x2 80x50 66 8 8 1/2 11 1/8 2 3 7 1/2 6 4 1/8 6 17 11/16 -- --
3 80 115 8 8 1/2 11 1/8 3 3 7 1/2 7 11/16 5 1/8 7 1/2 23 5/8 -- --
4x3 100x80 135 9 9 1/2 12 3 4 9 7 11/16 5 1/8 7 1/2 23 5/8 -- --
4 100 203 9 9 1/2 12 4 4 9 9 6 1/2 9 1/8 23 5/8 -- --
6x4 150x100 220 15 1/2 16 18 4 6 11 9 6 1/2 9 1/8 23 5/8 -- --
6 150 386 15 1/2 16 18 6 6 11 9 7/8 7 7/16 12 3/16 12 3/8 9 1/4 18 1/8
8x6 200x150 441 18 18 1/2 20 1/2 6 8 13 1/2 9 7/8 7 7/16 12 3/16 12 3/8 9 1/4 18 1/8
8 200 595 18 18 1/2 20 1/2 8 8 13 1/2 10 13/16 8 11/16 15 9/16 13 1/4 14 3/16 24
10x8 250x200 683 21 21 1/2 22 8 10 16 10 13/16 8 11/16 15 9/16 13 1/4 14 3/16 24
10 250 893 21 21 1/2 22 10 10 16 12 11/16 10 3/16 18 1/2 15 3/16 16 1/8 24
12x10 300x250 1,069 24 24 1/2 25 10 12 19 12 11/16 10 3/16 18 1/2 15 3/16 16 1/8 24
12 300 1,290 24 24 1/2 25 12 19 19 14 1/8 11 11/16 21 1/2 16 5/16 22 9/16 30
14x12 350x300 1,422 27 27 1/2 30 12 13 1/4 21 14 1/8 11 11/16 21 1/2 16 5/16 22 9/16 30
16x12 400x300 1,609 30 30 1/2 33 12 15 1/4 23 7/16 14 1/8 11 11/16 21 1/2 16 5/16 22 9/16 30
14 350 1,775 27 27 1/2 30 13 1/4 13 1/4 21 15 7/16 12 9/16 24 17 5/8 22 9/16 30
16x14 400x350 1,918 30 30 1/2 33 13 1/4 15 1/4 23 7/16 15 7/16 12 9/16 24 17 5/8 22 9/16 30
16 400 2,359 30 30 1/2 33 15 1/4 15 1/4 23 7/16 15 3/4 14 1/4 26 3/4 21 1/2 22 9/16 30
18x16 450x400 2,469 34 34 1/2 36 15 1/4 17 1/4 25 15 3/4 14 1/4 26 3/4 21 1/2 22 9/16 30
20x16 500x400 2,668 36 36 1/2 39 15 1/4 19 5/8 27 9/16 15 3/4 14 1/4 26 3/4 21 1/2 22 9/16 30
18 450 2,800 34 34 1/2 36 17 1/4 17 1/4 25 17 1/4 15 7/8 29 1/2 20 3/16 22 9/16 30
20x18 500x450 2,976 36 36 1/2 39 17 1/4 19 5/8 27 9/16 17 1/4 15 7/8 29 1/2 20 3/16 22 9/16 30
20 500 4,079 36 36 1/2 39 19 1/4 19 1/4 27 9/16 18 9/16 17 1/2 33 21 3/4 22 9/16 30
24x20 600x500 4,630 42 42 1/2 45 19 1/4 23 1/4 32 18 9/16 17 1/2 33 21 3/4 22 9/16 30
22 550 5,401 39 -- 43 21 1/4 21 1/4 29 1/2 20 1/2 19 3/16 36 7/16 23 22 9/16 30
24 600 7,011 42 42 1/2 45 23 1/4 23 1/4 32 22 9/16 21 40 26 1/8 25 5/16 30
30x24 750x600 7,562 51 -- 55 23 1/4 29 38 3/4 22 9/16 21 40 26 1/8 25 5/16 30
26 650 8,311 45 -- 49 25 25 34 1/4 23 7/16 25 42 27 25 5/16 30
28 700 10,218 49 -- 53 27 27 36 7/16 25 26 7/16 45 28 1/2 25 5/16 30
30 750 11,839 51 -- 55 29 29 38 3/4 27 27 3/4 47 9/16 30 5/8 25 5/16 30
36x30 900x750 14,220 60 -- 68 29 34 1/2 46 27 27 3/4 47 9/16 30 5/8 25 5/16 30
32 800 15,344 54 -- 60 30 3/4 30 3/4 41 3/4 29 9/16 29 9/16 51 7/16 36 5/16 25 5/16 30
34 850 17,527 58 -- 64 32 3/4 32 3/4 43 11/16 30 3/4 31 54 1/8 37 9/16 25 5/16 30
36 900 19,731 60 -- 68 34 1/2 34 1/2 46 32 32 3/16 56 1/2 38 9/16 25 5/16 30
40 1000 28,065 69 -- 77 38 1/2 38 1/2 50 13/16 35 11/16 35 11/16 63 1/2 41 3/4 25 5/16 30
42 1050 31,857 73 -- 82 40 1/4 40 1/4 53 37 37 66 1/8 43 25 5/16 30
48 1200 47,951 84 -- 94 46 46 59 7/16 41 13/16 41 7/8 75 9/16 48 25 5/16 30
56 1400 75,619 98 -- 98 54 1/2 54 1/2 68 5/16 48 1/4 48 7/16 89 58 7/8 25 5/16 30
14 www.ufvalve.com
UF
DIMENSIONS & WEIGHTS - CLASS 300
A
SIZE WEIGHT B B1 C D E F G H I
RF RTJ WE
NPS DN (lb) (in) (in) (in) (in) (in) (in) (in) (in) (in) (in) (in) (in)
2x 1 ½ 50x40 57 8 1/2 9 1/8 8 1/2 1 1/2 2 6 1/2 5 1/2 3 3/4 5 11/16 17 11/16 -- --
2 50 62 8 1/2 9 1/8 8 1/2 2 2 6 1/2 6 4 1/8 6 17 11/16 -- --
3x2 80x50 75 11 1/8 11 3/4 11 1/8 2 3 8 1/4 6 4 1/8 6 17 11/16 -- --
3 80 123 11 1/8 11 3/4 11 1/8 3 3 8 1/4 7 11/16 5 1/8 7 1/2 23 5/8 -- --
4x3 100x80 141 12 12 11/16 12 3 4 10 7 11/16 5 1/8 7 1/2 23 5/8 -- --
4 100 216 12 12 11/16 12 4 4 10 9 6 1/2 9 1/8 39 7/16 -- --
6x4 150x100 265 15 7/8 16 1/2 18 4 6 12 1/2 9 6 1/2 9 1/8 39 7/16 -- --
6 150 452 15 7/8 16 1/2 18 6 6 12 1/2 9 7/8 7 7/16 12 3/16 12 3/8 9 1/4 18 1/8
8x6 200x150 540 19 3/4 20 5/16 20 1/2 6 8 15 9 7/8 7 7/16 12 3/16 12 3/8 9 1/4 18 1/8
8 200 683 19 3/4 20 5/16 20 1/2 8 8 15 10 13/16 8 11/16 15 9/16 13 14 3/16 24
10x8 250x200 705 22 5/16 23 22 8 10 17 1/2 10 13/16 8 11/16 15 9/16 13 14 3/16 24
10 250 1,168 22 5/16 23 22 10 10 17 1/2 13 10 9/16 19 1/2 15 1/4 16 1/8 24
12x10 300x250 1,367 25 1/2 26 1/8 25 10 12 20 1/2 13 10 9/16 19 1/2 15 1/4 16 1/8 24
12 300 1,720 25 1/2 26 1/8 25 12 12 20 1/2 14 7/8 12 5/16 23 17 22 9/16 30
14x12 350x300 1,896 30 30 5/8 30 12 13 1/4 23 14 7/8 12 5/16 23 17 22 9/16 30
16x12 400x300 2,227 33 33 5/8 33 12 15 1/4 25 5/8 14 7/8 12 5/16 23 17 22 9/16 30
14 350 2,403 30 30 5/8 30 13 1/4 13 1/4 23 15 13 1/2 25 3/16 17 5/16 22 9/16 30
16x14 400x350 2,623 33 33 5/8 33 13 1/4 15 1/4 25 5/8 15 13 1/2 25 3/16 17 5/16 22 9/16 30
16 400 3,263 33 33 5/8 33 15 1/4 15 1/4 25 5/8 16 7/8 15 9/16 29 19 13/16 22 9/16 30
18x16 450x400 3,638 36 36 5/8 36 15 1/4 17 1/4 28 16 7/8 15 9/16 29 19 13/16 22 9/16 30
20x16 500x400 3,792 39 39 3/4 39 15 1/4 19 1/4 30 1/2 16 7/8 15 9/16 29 19 13/16 22 9/16 30
18 450 3,715 36 36 5/8 36 17 1/4 17 1/4 28 17 5/16 18 7/8 29 7/8 20 1/4 22 9/16 30
20x18 500x450 4,145 39 39 3/4 39 17 1/4 19 1/4 30 1/2 17 5/16 18 7/8 29 7/8 20 1/4 22 9/16 30
20 500 5,062 39 39 3/4 39 19 1/4 19 1/4 30 1/2 19 5/8 20 9/16 33 1/4 23 1/8 22 9/16 30
24x20 600x500 6,063 45 45 7/8 45 19 1/4 23 1/4 36 19 5/8 20 9/16 33 1/4 23 1/8 22 9/16 30
22 550 6,349 43 43 7/8 43 21 1/4 21 1/4 33 20 5/8 22 1/8 36 7/16 24 3/16 22 9/16 30
24 600 7,959 45 45 7/8 45 23 1/4 23 1/4 36 23 23 11/16 39 9/16 26 1/2 25 5/16 30
30x24 750x600 10,207 55 56 55 23 1/4 29 43 23 23 11/16 39 9/16 26 1/2 25 5/16 30
26 650 10,604 49 50 49 25 25 38 3/16 25 25 3/4 42 9/16 31 11/16 25 5/16 30
28 700 13,051 53 54 53 27 27 40 3/4 26 1/2 26 7/8 45 9/16 32 5/8 25 5/16 30
30 750 14,859 55 56 55 29 29 43 28 28 5/16 48 3/4 34 25 5/16 30
36x30 900x750 18,365 68 69 1/8 68 29 34 1/2 50 28 28 5/16 48 3/4 34 25 5/16 30
32 800 17,813 60 61 1/8 60 30 3/4 30 3/4 45 1/4 29 9/16 29 11/16 51 1/2 35 11/16 25 5/16 30
34 850 20,415 64 65 1/8 64 32 3/4 32 3/4 47 7/16 30 1/8 31 54 1/4 36 1/4 25 5/16 30
36 900 22,664 68 69 1/8 68 34 1/2 34 1/2 50 31 1/2 32 3/16 56 1/2 37 5/8 25 5/16 30
40 1000 30,799 77 -- 77 38 1/2 38 1/2 48 9/16 35 3/4 35 9/16 63 3/4 41 7/8 25 5/16 30
42 1050 35,935 82 -- 82 40 1/4 40 1/4 50 13/16 37 3/16 37 5/16 66 13/16 43 1/4 25 5/16 30
48 1200 53,572 85 7/16 -- 94 46 46 57 11/16 42 11/16 42 11/16 77 7/16 53 5/16 25 5/16 30
56 1400 84,659 108 -- 108 54 1/2 54 1/2 67 5/16 48 7/16 48 3/4 89 5/8 60 1/4 25 5/16 30
www.ufvalve.com 15
UF
DIMENSIONS & WEIGHTS - CLASS 600
A
SIZE WEIGHT B B1 C D E F G H I
RF RTJ WE
NPS DN (lb) (in) (in) (in) (in) (in) (in) (in) (in) (in) (in) (in) (in)
2x 1 ½ 50x40 66 11 1/2 11 5/8 11 1/2 1 1/2 2 6 1/2 5 11/16 3 3/4 5 11/16 17 11/16 -- --
2 50 75 11 1/2 11 5/8 11 1/2 2 2 6 1/2 6 4 1/8 6 23 5/8 -- --
3x2 80x50 97 14 14 1/8 14 2 7/16 3 8 1/4 6 4 1/8 6 23 5/8 -- --
3 80 145 14 14 1/8 14 3 3 8 1/4 7 11/16 5 1/8 7 1/2 39 7/16 -- --
4x3 100x80 196 17 17 1/8 17 3 4 10 3/4 7 11/16 5 1/8 7 1/2 39 7/16 -- --
4 100 265 17 17 1/8 17 4 4 10 3/4 9 6 1/2 9 1/8 39 7/16 -- --
6x4 150x100 353 22 22 1/8 22 4 6 14 9 6 1/2 9 1/8 39 7/16 -- --
6 150 606 22 22 1/8 22 6 6 14 9 7/8 7 7/16 12 3/16 12 9 1/4 18 1/8
8x6 200x150 683 26 26 1/8 26 6 8 16 1/2 9 7/8 7 7/16 12 3/16 12 9 1/4 18 1/8
8 200 1,124 26 26 1/8 26 8 8 16 1/2 12 1/4 9 11/16 18 1/8 14 3/8 16 1/8 24
10x8 250x200 1,257 31 31 1/8 31 8 10 20 12 1/4 9 11/16 18 1/8 14 3/8 16 1/8 24
10 250 1,764 31 31 1/8 31 10 10 20 12 13/16 11 7/16 21 1/2 15 3/16 16 1/8 24
12x10 300x250 1,874 33 33 1/8 33 10 12 22 12 13/16 11 7/16 21 1/2 15 3/16 16 1/8 24
12 300 2,447 33 33 1/8 33 12 12 22 14 7/8 13 1/2 25 3/8 17 1/4 22 9/16 30
14x12 350x300 2,601 35 35 1/8 35 12 13 1/4 23 9/16 14 7/8 13 1/2 25 3/8 17 1/4 22 9/16 30
16x12 400x300 3,064 39 39 1/8 39 12 15 1/4 27 14 7/8 13 1/2 25 3/8 17 1/4 22 9/16 30
14 350 2,491 35 35 1/8 35 13 1/4 13 1/4 23 9/16 14 1/8 15 7/8 23 9/16 17 22 9/16 30
16x14 400x350 2,998 39 39 1/8 39 13 1/4 15 1/4 27 14 1/8 15 7/8 23 9/16 17 22 9/16 30
16 400 3,483 39 39 1/8 39 15 1/4 15 1/4 27 15 5/8 17 7/16 27 18 9/16 22 9/16 30
18x16 450x400 3,891 43 43 1/8 43 15 1/4 17 1/4 29 5/16 15 5/8 17 7/16 27 18 9/16 22 9/16 30
20x16 500x400 4,784 47 47 1/4 47 15 1/4 19 1/4 32 15 5/8 17 7/16 27 18 9/16 22 9/16 30
18 450 4,806 43 43 1/8 43 17 1/4 17 1/4 29 5/16 19 19 3/16 30 1/2 22 9/16 22 9/16 30
20x18 500x450 5,423 47 47 1/4 47 17 1/4 19 1/4 32 19 19 3/16 30 1/2 22 9/16 22 9/16 30
20 500 6,129 47 47 1/4 47 19 1/4 19 1/4 32 19 13/16 20 11/16 33 1/2 23 1/2 25 5/16 30
24x20 600x500 7,474 55 55 5/16 55 19 1/4 23 1/4 37 19 13/16 20 11/16 33 1/2 23 1/2 25 5/16 30
22 550 8,664 51 51 7/16 51 21 1/4 21 1/4 34 1/4 22 1/4 22 5/8 37 11/16 29 25 5/16 30
24 600 10,759 55 55 5/16 55 23 1/4 23 1/4 37 23 3/4 24 40 1/4 29 7/8 25 5/16 30
30x24 750x600 13,029 65 65 1/2 65 23 1/4 29 44 1/2 23 3/4 24 40 1/4 29 7/8 25 5/16 30
26 650 12,853 57 57 1/2 57 25 25 40 25 1/8 25 9/16 43 3/16 31 1/4 25 5/16 30
28 700 15,300 61 61 1/2 61 27 27 42 5/16 27 27 46 1/8 33 25 5/16 30
30 750 18,872 65 65 1/2 65 29 29 44 1/2 28 5/8 28 9/16 50 35 25 5/16 30
36x30 900x750 23,280 82 82 5/8 82 29 34 1/2 51 3/4 28 5/8 28 9/16 50 35 25 5/16 30
32 800 21,914 70 70 5/8 70 30 3/4 30 3/4 47 30 30 3/16 52 1/2 36 25 5/16 30
34 850 25,508 76 76 5/8 76 32 3/4 32 3/4 49 31 5/16 31 11/16 55 7/16 37 7/16 25 5/16 30
36 900 29,829 82 82 5/8 82 34 1/2 34 1/2 51 3/4 32 3/4 33 58 1/8 38 7/8 25 5/16 30
40 1000 40,940 92 92 92 38 1/2 38 1/2 52 36 11/16 36 7/8 65 9/16 47 11/16 25 5/16 30
42 1050 47,598 96 96 96 40 1/4 40 1/4 55 5/16 38 5/16 38 1/2 69 53 5/16 25 5/16 30
48 1200 69,556 100 100 100 46 46 62 13/16 43 5/8 43 9/16 79 3/4 61 1/4 25 5/16 30
56 1400 105,470 116 116 116 54 1/2 54 1/2 73 50 46 1/4 92 7/16 62 7/16 25 5/16 30
16 www.ufvalve.com
UF
DIMENSIONS & WEIGHTS - CLASS 900
A
SIZE WEIGHT B B1 C D E F G H I
RF RTJ WE
NPS DN (lb) (in) (in) (in) (in) (in) (in) (in) (in) (in) (in) (in) (in)
2x 1 ½ 50x40 99 14 1/2 14 5/8 14 1/2 1 1/2 2 8 1/2 5 11/16 3 3/4 5 11/16 17 11/16 -- --
2 50 115 14 1/2 14 5/8 14 1/2 2 2 8 1/2 6 4 1/8 6 23 5/8 -- --
3x2 80x50 128 15 15 1/8 15 2 3 9 1/2 6 4 1/8 6 23 5/8 -- --
3 80 176 15 15 1/8 15 3 3 9 1/2 7 11/16 5 1/8 7 1/2 39 7/16 -- --
4x3 100x80 231 18 18 1/8 18 3 4 11 1/2 7 11/16 5 1/8 7 1/2 39 7/16 -- --
4 100 375 18 18 1/8 18 4 4 11 1/2 7 7/8 6 1/2 9 1/8 10 3/8 9 1/4 18 1/8
6x4 150x100 507 24 24 1/8 24 4 6 15 7 7/8 6 1/2 9 1/8 10 3/8 9 1/4 18 1/8
6 150 860 24 24 1/8 24 6 6 15 10 5/8 8 15 12 13/16 14 3/16 24
8x6 200x150 1,036 29 29 1/8 29 6 8 18 1/2 10 5/8 8 15 12 13/16 14 3/16 24
8 200 1,411 29 29 1/8 29 8 8 18 1/2 11 5/8 10 1/4 19 14 16 1/8 24
10x8 250x200 1,609 33 33 1/8 33 8 10 21 1/2 11 5/8 10 1/4 19 14 16 1/8 24
10 250 2,359 33 33 1/8 33 10 10 21 1/2 15 5/16 12 11/16 23 7/16 22 22 9/16 30
12x10 300x250 2,646 38 38 1/8 38 10 12 24 15 5/16 12 11/16 23 7/16 22 22 9/16 30
12 300 3,549 38 38 1/8 38 12 12 24 17 9/16 14 9/16 27 9/16 20 1/2 22 9/16 30
14x12 350x300 3,739 40 1/2 40 7/8 40 1/2 12 12 3/4 25 3/16 17 9/16 14 9/16 27 9/16 20 1/2 22 9/16 30
16x12 400x300 3,946 44 1/2 44 7/8 44 1/2 12 14 3/4 27 3/4 17 9/16 14 9/16 27 9/16 20 1/2 22 9/16 30
14 350 3,439 40 1/2 40 7/8 40 1/2 12 3/4 12 3/4 25 3/16 14 9/16 16 1/2 25 3/16 17 13/16 22 9/16 30
16x14 400x350 3,968 44 1/2 44 7/8 44 1/2 12 3/4 14 3/4 27 3/4 14 9/16 16 1/2 25 3/16 17 13/16 22 9/16 30
16 400 4,938 44 1/2 44 7/8 44 1/2 14 3/4 14 3/4 27 3/4 18 18 1/2 29 1/8 21 5/8 22 9/16 30
18x16 450x400 5,556 48 48 1/2 48 14 3/4 16 3/4 31 18 18 1/2 29 1/8 21 5/8 22 9/16 30
20x16 500x400 6,548 52 52 1/2 52 14 3/4 18 5/8 33 11/16 18 18 1/2 29 1/8 21 5/8 22 9/16 30
18 450 6,614 48 48 1/2 48 16 3/4 16 3/4 31 19 9/16 20 1/8 32 5/16 23 3/8 22 9/16 30
20x18 500x450 7,496 52 52 1/2 52 16 3/4 18 5/8 33 11/16 19 9/16 20 1/8 32 5/16 23 3/8 22 9/16 30
20 500 9,612 52 52 1/2 52 18 5/8 18 5/8 33 11/16 21 7/8 22 1/8 36 7/16 28 25 5/16 30
24x20 600x500 12,302 61 61 3/4 61 18 5/8 22 1/2 41 21 7/8 22 1/8 36 7/16 28 25 5/16 30
24 600 15,498 61 61 3/4 61 22 1/2 22 1/2 41 25 3/16 25 5/8 43 5/16 31 5/16 25 5/16 30
30x24 750x600 19,798 74 74 7/8 74 22 1/2 28 1/8 48 7/16 25 3/16 25 5/8 43 5/16 31 5/16 25 5/16 30
26 650 18,232 65 66 65 24 7/16 24 7/16 42 11/16 26 3/4 27 46 1/4 32 7/8 25 5/16 30
28 700 22,487 69 69 7/8 69 26 1/4 26 1/4 46 28 1/2 29 50 34 11/16 25 5/16 30
30 750 27,425 74 74 7/8 74 28 1/8 28 1/8 48 7/16 30 1/2 31 54 1/4 41 3/16 25 5/16 30
36x30 900x750 34,502 90 91 1/8 90 28 1/8 33 3/4 57 1/2 30 1/2 31 54 1/4 41 3/16 25 5/16 30
32 800 26,676 80 80 7/8 80 30 30 51 3/4 32 1/4 32 7/16 57 43 25 5/16 30
34 850 38,493 85 86 1/8 85 31 7/8 31 7/8 55 33 3/4 33 7/8 59 9/16 44 7/16 25 5/16 30
36 900 44,423 90 91 1/8 90 33 3/4 33 3/4 57 1/2 35 7/16 35 7/16 63 46 1/8 25 5/16 30
40 1000 97,378 100 * 100 37 11/16 37 11/16 59 1/2 38 3/16 44 71 1/4 47 25 5/16 30
42 1050 52,073 105 106 1/8 105 39 5/8 39 5/8 * 41 3/4 47 1/4 74 13/16 48 25 5/16 30
48 1200 72,378 * * * 45 1/4 45 1/4 * 45 1/4 52 5/16 85 52 25 5/16 30
www.ufvalve.com 17
UF
DIMENSIONS & WEIGHTS - CLASS 1500
A
SIZE WEIGHT B B1 C D E F G H I
RF RTJ WE
NPS DN (lb) (in) (in) (in) (in) (in) (in) (in) (in) (in) (in) (in) (in)
2x 1 ½ 50x40 99 14 1/2 14 5/8 14 1/2 1 1/2 2 8 1/2 5 11/16 3 3/4 5 11/16 17 11/16 -- --
2 50 121 14 1/2 14 5/8 14 1/2 2 2 8 1/2 6 4 1/8 6 23 5/8 -- --
3x2 80x50 165 18 1/2 18 5/8 18 1/2 2 3 10 1/2 6 4 1/8 6 23 5/8 -- --
3 80 231 18 1/2 18 5/8 18 1/2 3 3 10 1/2 7 11/16 5 1/8 7 1/2 39 7/16 9 1/4 18 1/8
4x3 100x80 287 21 1/2 21 5/8 21 1/2 3 4 12 1/4 7 11/16 5 1/8 7 1/2 39 7/16 9 1/4 18 1/8
4 100 452 21 1/2 21 5/8 21 1/2 4 4 12 1/4 7 7/8 6 1/2 11 1/4 10 9 1/4 18 1/8
6x4 150x100 661 27 3/4 28 27 3/4 4 5 3/4 15 1/2 7 7/8 6 1/2 11 1/4 10 9 1/4 18 1/8
6 150 1,157 27 3/4 28 27 3/4 5 3/4 5 3/4 15 1/2 10 3/16 9 16 1/2 12 1/2 14 3/16 24
8x6 200x150 1,356 32 3/4 33 1/8 32 3/4 5 3/4 7 11/16 19 10 3/16 9 16 1/2 12 1/2 14 3/16 24
8 200 1,940 32 3/4 33 1/8 32 3/4 7 11/16 7 11/16 19 13 3/16 11 7/8 20 7/8 16 1/8 22 9/16 30
10x8 250x200 2,392 39 39 7/16 39 7 11/16 9 1/2 23 13 3/16 11 7/8 20 7/8 16 1/8 22 9/16 30
10 250 3,439 39 39 7/16 39 9 1/2 9 1/2 23 15 7/16 13 3/4 25 3/8 18 3/8 22 9/16 30
12x10 300x250 4,079 44 1/2 45 1/8 44 1/2 9 1/2 11 7/16 26 9/16 15 7/16 13 3/4 25 3/8 18 3/8 22 9/16 30
12 300 5,192 44 1/2 45 1/8 44 1/2 11 7/16 11 7/16 26 9/16 19 7/16 16 3/4 30 11/16 22 5/16 22 9/16 30
14x12 350x300 5,776 49 1/2 50 1/4 49 1/2 11 7/16 12 1/2 29 1/2 19 7/16 16 3/4 30 11/16 22 5/16 22 9/16 30
16x12 400x300 6,371 54 1/2 55 5/16 54 1/2 11 7/16 14 1/4 32 1/2 19 7/16 16 3/4 30 11/16 22 5/16 22 9/16 30
14 350 6,658 49 1/2 50 1/4 49 1/2 12 1/2 12 1/2 29 1/2 18 1/2 19 30 3/16 22 22 9/16 30
16 400 9,392 54 1/2 55 5/16 54 1/2 14 1/4 14 1/4 32 1/2 20 5/8 21 1/4 34 9/16 24 3/16 26 1/8 30
18 450 14,110 60 1/2 61 7/16 60 1/2 16 16 36 23 7/16 23 7/8 39 9/16 29 1/2 26 1/8 30
20 500 20,503 65 1/2 66 7/16 65 1/2 18 18 38 3/4 26 3/4 27 5/16 46 7/8 32 7/8 26 1/8 30
24 600 32,077 80 7/16 81 1/2 80 7/16 21 21 46 29 9/16 30 1/2 53 1/8 40 1/2 26 1/8 30
26 650 18,651 78 79 1/8 78 23 1/2 23 1/2 * 35 1/2 38 5/16 60 1/2 46 7/8 26 1/8 30
28 700 21,341 80 81 1/8 80 25 1/4 25 1/4 * 37 40 9/16 65 48 1/2 26 1/8 30
30 750 25,596 90 91 1/8 90 27 27 * 40 3/4 42 68 5/16 52 3/16 26 1/8 30
32 800 29,101 95 96 1/4 95 28 3/4 28 3/4 * 41 3/4 45 7/8 73 9/16 54 26 1/8 30
34 850 35,627 108 * 108 30 1/2 30 1/2 * 44 7/8 48 3/8 78 1/8 57 1/2 26 1/8 30
36 900 41,535 108 108 1/2 108 32 1/4 32 1/4 * 46 1/2 51 7/16 82 3/8 60 1/4 26 1/8 30
18 www.ufvalve.com
UF
DIMENSIONS & WEIGHTS - CLASS 2500/4500
A
SIZE WEIGHT B B1 C D E F G H I
RF RTJ WE
NPS DN (lb) (in) (in) (in) (in) (in) (in) (in) (in) (in) (in) (in) (in)
2x 1 ½ 50x40 143 17 3/4 17 7/8 17 3/4 1 1/2 44 1/2 9 1/4 5 1/2 3 3/4 6 23 5/8 -- --
2 50 205 17 3/4 17 7/8 17 3/4 1 3/4 44 1/2 9 1/4 5 11/16 6 11/16 7 7/8 7 13/16 7 1/4 14 3/16
3x2 80x50 364 22 3/4 23 22 3/4 1 3/4 63 1/2 12 5 11/16 6 11/16 7 7/8 7 13/16 7 1/4 14 3/16
3 80 474 22 3/4 23 22 3/4 2 1/2 63 1/2 12 7 1/2 8 10 9/16 9 11/16 9 1/4 18 1/8
4x3 100x80 617 26 1/2 26 7/8 26 1/2 2 1/2 89 14 7 1/2 8 10 9/16 9 11/16 9 1/4 18 1/8
4 100 849 26 1/2 26 7/8 26 1/2 3 1/2 89 14 8 7/8 9 7/16 13 3/4 11 14 3/16 24
6x4 150x100 1,190 36 36 1/2 36 3 1/2 133 19 8 7/8 9 7/16 13 3/4 11 14 3/16 24
6 150 1,830 36 36 1/2 36 5 1/4 133 19 12 11 1/4 18 7/8 15 16 1/8 24
8x6 200x150 2,535 40 1/4 40 7/8 40 1/4 5 1/4 181 21 11/16 12 11 1/4 18 7/8 15 16 1/8 24
10x6 250x150 3,384 50 50 7/8 50 5 1/4 226 26 9/16 12 11 1/4 18 7/8 15 16 1/8 24
8 200 3,164 40 1/4 40 7/8 40 1/4 7 1/8 181 21 11/16 15 3/4 14 9/16 25 5/8 18 11/16 22 9/16 30
10x8 250x200 3,858 50 50 7/8 50 7 1/8 226 26 9/16 15 3/4 14 9/16 25 5/8 18 11/16 22 9/16 30
12x8 300x200 4,991 56 56 7/8 56 7 1/8 267 30 15 3/4 15 5/16 25 5/8 18 11/16 22 9/16 30
10 250 4,894 50 50 7/8 50 9 226 26 9/16 18 1/2 17 1/8 30 5/16 22 25 5/16 30
12x10 300x250 5,842 56 56 7/8 56 9 267 30 18 1/2 17 1/8 30 5/16 22 25 5/16 30
14x10 350x250 5,842 65 65 65 9 267 30 18 1/2 17 1/8 30 5/16 22 25 5/16 30
12 300 7,385 56 56 7/8 56 10 1/2 267 30 21 1/4 19 1/2 36 27 3/16 25 5/16 30
16x12 400x300 11,398 77 1/4 77 1/4 77 1/4 10 1/2 352 30 21 1/4 19 1/2 36 27 3/16 25 5/16 30
14 350 11,222 65 65 65 12 1/4 311 * 24 13/16 22 9/16 39 30 3/16 25 5/16 30
18x14 450x350 14,705 84 84 84 12 1/4 397 * 24 13/16 22 9/16 39 30 3/16 25 5/16 30
16 400 13,580 77 1/4 77 1/4 77 1/4 13 7/8 352 * 28 5/16 26 7/16 43 5/16 33 11/16 25 5/16 30
20x16 500x400 19,742 90 90 90 13 7/8 438 * 28 5/16 26 7/16 43 5/16 33 11/16 25 5/16 30
18 450 19,026 84 84 84 15 5/8 397 * 31 7/8 29 1/8 47 9/16 38 3/16 25 5/16 30
20 500 25,662 90 90 90 17 1/4 438 * 35 7/16 32 1/2 52 3/16 41 3/4 25 5/16 30
www.ufvalve.com 19
UF
DIMENSIONS & WEIGHTS - API 2000
4 1/16 x 2 9/16 15 5/16 17 1/8 15 5/16 7 1/2 5 11/16▲ 8 1/4 15 3/4 7 19 11/16
4 1/16 x 3 1/8 15 5/16 17 1/8 15 5/16 9 7 1/4 9 9/16 15 3/4 -- --
5 1/8 x 4 1/16 18 20 1/8 18 10 7 11/16 9 1/4 15 3/4 -- --
7 1/16 x 4 1/16 20 22 1/8 20 10 7 11/16 9 9/16 19 11/16 -- --
9 x 7 1/16 23 9/16 26 1/8 23 9/16 14 9 9/16 12 3/16 19 11/16 -- --
11 x 9 28 1/4 31 1/8 28 1/4 17 11 7/16 14 7/16 19 11/16 -- --
13 5/8 x 11 30 3/16 33 1/8 30 3/16 20 11/16 14 20 1/2 19 11/16 -- --
16 3/4 x 13 5/8 33 9/16 39 1/8 33 9/16 24 3/16 15 3/4 21 7/8 19 11/16 -- --
21 1/4 x 16 3/4 43 5/16 47 1/4 43 5/16 26 9/16 17 23 5/8 19 11/16 -- --
26 3/4 x 21 1/4 52 1/2 57 1/2 52 1/2 37 23 27 3/16 23 5/8 -- --
30 x 26 3/4 60 3/16 65 1/2 60 3/16 45 7/8 28 3/4 34 23 5/8 -- --
Dimensions for flange x weld valves may be determined by adding half the length of the welding-ends valve to one half the length of the flanged-ends valve of the same pressure rating.
20 www.ufvalve.com
UF
DIMENSIONS & WEIGHTS - API 3000
Dimensions for flange x weld valves may be determined by adding half the length of the welding-ends valve to one half the length of the flanged-ends valve of the same pressure rating.
www.ufvalve.com 21
UF
DIMENSIONS & WEIGHTS - API 5000
Dimensions for flange x weld valves may be determined by adding half the length of the welding-ends valve to one half the length of the flanged-ends valve of the same pressure rating.
22 www.ufvalve.com
UF
DIMENSIONS & WEIGHTS - API 10000
2 9/16 x 1 13/16 20 3/16 22 1/4 20 3/16 9 6 11/16 9 9/16 15 3/4 10 1/4 19 11/16
3 1/16 x 2 1/16 22 24 7/16 22 10 5/8 7 7/8 11 1/4 15 3/4 11 19 11/16
4 1/16 x 3 1/16 23 9/16 26 7/16 23 9/16 12 13/16 8 11/16 12 13/16 19 11/16 -- --
5 1/8 x 4 1/16 31 7/8 35 31 7/8 16 5/16 7 7/8 15 3/4 19 11/16 -- --
7 1/16 x 5 1/8 36 3/4 40 7/8 36 3/4 22 7/16 14 3/4 23 1/4 19 11/16 -- --
9 x 7 1/16 46 1/8 51 46 1/8 27 5/16 17 1/8 23 23 5/8 -- --
11 x 9 55 3/8 61 55 3/8 35 5/8 21 1/4 28 5/16 23 5/8 -- --
13 5/8 x 11 58 7/8 65 1/2 58 7/8 41 5/16 24 3/16 32 7/8 23 5/8 -- --
16 3/4 x 13 5/8 * * * 43 11/16 26 3/16 36 1/4 31 1/2 -- --
18 3/4 x 16 3/4 * * * 41 5/16 24 3/16 33 1/4 31 1/2 -- --
21 1/4 x 18 3/4 * * * 44 26 7/16 36 7/16 31 1/2 -- --
Dimensions for flange x weld valves may be determined by adding half the length of the welding-ends valve to one half the length of the flanged-ends valve of the same pressure rating.
*available upon request
www.ufvalve.com 23
UF
DIMENSIONS & WEIGHTS - API 15000
Dimensions for flange x weld valves may be determined by adding half the length of the welding-ends valve to one half the length of the flanged-ends valve of the same pressure rating.
*available upon request
24 www.ufvalve.com
UF
DIMENSIONS & WEIGHTS - API 20000
Dimensions for flange x weld valves may be determined by adding half the length of the welding-ends valve to one half the length of the flanged-ends valve of the same pressure rating.
*available upon request
www.ufvalve.com 25
UF
DIMENSIONS & WEIGHTS - CLASS 150
A
SIZE WEIGHT B B1 C D E F G H I
RF RTJ WE
NPS DN (kg) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm)
2x 1 ½ 50x40 25 178 191 216 38 51 152 140 95 145 450 -- --
2 50 28 178 191 216 51 51 152 155 105 152 450 -- --
3x2 80x50 30 203 216 283 51 77 191 155 105 152 450 -- --
3 80 52 203 216 283 77 77 191 195 130 190 600 -- --
4x3 100x80 61 229 241 305 77 102 229 195 130 190 600 -- --
4 100 92 229 241 305 102 102 229 230 164 232 600 -- --
6x4 150x100 100 394 406 457 102 152 279 230 164 232 600 -- --
6 150 175 394 406 457 152 152 279 251 189 310 315 235 460
8x6 200x150 200 457 470 521 152 203 343 251 189 310 315 235 460
8 200 270 457 470 521 203 203 343 274 221 395 337 360 610
10x8 250x200 310 533 546 559 203 254 406 274 221 395 337 360 610
10 250 405 533 546 559 254 254 406 321 259 470 385 410 610
12x10 300x250 485 610 622 635 254 305 483 321 259 470 385 410 610
12 300 585 610 622 635 305 483 483 359 297 545 414 580 760
14x12 350x300 645 686 698 762 305 337 535 359 297 545 414 580 760
16x12 400x300 730 762 775 838 305 387 595 359 297 545 414 580 760
14 350 805 686 698 762 337 337 535 392 326 610 447 580 760
16x14 400x350 870 762 775 838 337 387 595 392 326 610 447 580 760
16 400 1,070 762 775 838 387 387 595 400 363 680 545 580 760
18x16 450x400 1,120 864 876 914 387 438 635 400 363 680 545 580 760
20x16 500x400 1,210 914 927 991 387 498 700 400 363 680 545 580 760
18 450 1,270 864 876 914 438 438 635 438 403 750 513 580 760
20x18 500x450 1,350 914 927 991 438 498 700 438 403 750 513 580 760
20 500 1,850 914 927 991 489 489 700 478 444 840 553 580 760
24x20 600x500 2,100 1067 1080 1143 489 591 815 478 444 840 553 580 760
22 550 2,450 991 -- 1092 540 540 750 520 487 925 585 580 760
24 600 3,180 1067 1080 1143 591 591 815 573 535 1015 663 643 760
30x24 750x600 3,430 1295 -- 1397 591 737 985 573 535 1015 663 643 760
26 650 3,770 1143 -- 1245 635 635 870 595 633 1066 685 643 760
28 700 4,635 1244 -- 1346 686 686 925 633 671 1142 723 643 760
30 750 5,370 1295 -- 1397 736 736 985 687 705 1215 777 643 760
36x30 900x750 6,450 1524 -- 1728 736 876 1170 687 705 1215 777 643 760
32 800 6,960 1371 -- 1524 781 781 1060 751 751 1306 923 643 760
34 850 7,950 1473 -- 1626 832 832 1110 781 787 1375 954 643 760
36 900 8,950 1524 -- 1727 876 876 1170 815 818 1435 986 643 760
40 1000 12,730 1753 -- 1956 978 978 1290 906 906 1613 1061 643 760
42 1050 14,450 1855 -- 2083 1022 1022 1345 938 940 1680 1093 643 760
48 1200 21,750 2134 -- 2388 1168 1168 1510 1062 1063 1926 1217 643 760
56 1400 34,300 2489 -- 2489 1384 1384 1735 1225 1230 2260 1496 643 760
26 www.ufvalve.com
UF
DIMENSIONS & WEIGHTS - CLASS 300
A
SIZE WEIGHT B B1 C D E F G H I
RF RTJ WE
NPS DN (kg) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm)
2x 1 ½ 50x40 26 216 232 216 38 51 165 140 95 145 450 -- --
2 50 28 216 232 216 51 51 165 155 105 152 450 -- --
3x2 80x50 34 283 298 283 51 77 210 155 105 152 450 -- --
3 80 56 283 298 283 77 77 210 195 130 190 600 -- --
4x3 100x80 64 305 321 305 77 102 254 195 130 190 600 -- --
4 100 98 305 321 305 102 102 254 230 164 232 1000 -- --
6x4 150x100 120 403 419 457 102 152 318 230 164 232 1000 -- --
6 150 205 403 419 457 152 152 318 251 189 310 315 235 460
8x6 200x150 245 502 517 521 152 203 381 251 189 310 315 235 460
8 200 310 502 517 521 203 203 381 274 221 395 329 360 610
10x8 250x200 320 568 584 559 203 254 445 274 221 395 329 360 610
10 250 530 568 584 559 254 254 445 332 268 495 387 410 610
12x10 300x250 620 648 664 635 254 305 520 332 268 495 387 410 610
12 300 780 648 664 635 305 305 520 378 314 585 433 580 760
14x12 350x300 860 762 778 762 305 337 585 378 314 585 433 580 760
16x12 400x300 1,010 838 854 838 305 387 650 378 314 585 433 580 760
14 350 1,090 762 778 762 337 337 585 380 342 640 440 580 760
16x14 400x350 1,190 838 854 838 337 387 650 380 342 640 440 580 760
16 400 1,480 838 854 838 387 387 650 428 395 736 503 580 760
18x16 450x400 1,650 914 930 914 387 438 710 428 395 736 503 580 760
20x16 500x400 1,720 991 1010 991 387 489 775 428 395 736 503 580 760
18 450 1,685 914 930 914 438 438 710 440 480 759 515 580 760
20x18 500x450 1,880 991 1010 991 438 489 775 440 480 759 515 580 760
20 500 2,296 991 1010 991 489 489 775 498 522 845 588 580 760
24x20 600x500 2,750 1143 1165 1143 489 591 915 498 522 845 588 580 760
22 550 2,880 1092 1114 1092 540 540 840 524 562 924 614 580 760
24 600 3,610 1143 1165 1143 591 591 915 584 602 1005 674 643 760
30x24 750x600 4,630 1397 1422 1397 591 737 1090 584 602 1005 674 643 760
26 650 4,810 1245 1270 1245 635 635 970 633 654 1088 805 643 760
28 700 5,920 1346 1372 1346 686 686 1035 673 682 1164 828 643 760
30 750 6,740 1397 1422 1397 736 736 1090 711 719 1238 866 643 760
36x30 900x750 8,330 1727 1756 1727 736 876 1270 711 719 1238 866 643 760
32 800 8,080 1524 1553 1524 781 781 1150 751 754 1308 906 643 760
34 850 9,260 1626 1654 1626 832 832 1205 765 789 1378 920 643 760
36 900 10,280 1727 1756 1727 876 876 1270 800 818 1435 955 643 760
40 1000 13,970 1956 -- 1956 978 978 1240 908 910 1620 1063 643 760
42 1050 16,300 2083 -- 2083 1022 1022 1290 945 949 1697 1099 643 760
48 1200 24,300 2170 -- 2388 1168 1168 1465 1084 1083 1967 1354 643 760
56 1400 38,400 2743 -- 2743 1384 1384 1710 1230 1238 2276 1530 643 760
www.ufvalve.com 27
UF
DIMENSIONS & WEIGHTS - CLASS 600
A
SIZE WEIGHT B B1 C D E F G H I
RF RTJ WE
NPS DN (kg) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm)
2x 1 ½ 50x40 30 292 295 292 38 51 165 145 95 145 450 -- --
2 50 34 292 295 292 51 51 165 155 105 152 600 -- --
3x2 80x50 44 356 359 356 62 77 210 155 105 152 600 -- --
3 80 66 356 359 356 77 77 210 195 130 190 1000 -- --
4x3 100x80 89 432 435 432 77 102 273 195 130 190 1000 -- --
4 100 120 432 435 432 102 102 273 230 165 232 1000 -- --
6x4 150x100 160 559 562 559 102 152 356 230 165 232 1000 -- --
6 150 275 559 562 559 152 152 356 251 189 310 306 235 460
8x6 200x150 310 660 664 660 152 203 419 251 189 310 306 235 460
8 200 510 660 664 660 203 203 419 311 245 460 366 410 610
10x8 250x200 570 787 791 787 203 254 510 311 245 460 366 410 610
10 250 800 787 791 787 254 254 510 325 290 545 385 410 610
12x10 300x250 850 838 841 838 254 305 560 325 290 545 385 410 610
12 300 1,110 838 841 838 305 305 560 378 343 645 438 580 760
14x12 350x300 1,180 889 892 889 305 337 605 378 343 645 438 580 760
16x12 400x300 1,390 991 994 991 305 387 685 378 343 645 438 580 760
14 350 1,130 889 892 889 337 337 605 359 403 605 434 580 760
16x14 400x350 1,360 991 994 991 337 387 685 359 403 605 434 580 760
16 400 1,580 991 994 991 387 387 685 397 443 686 472 580 760
18x16 450x400 1,765 1092 1095 1092 387 438 745 397 443 686 472 580 760
20x16 500x400 2,170 1194 1200 1194 387 489 815 397 443 686 472 580 760
18 450 2,180 1092 1095 1092 438 438 745 483 488 775 573 580 760
20x18 500x450 2,460 1194 1200 1194 438 489 815 483 488 775 573 580 760
20 500 2,780 1194 1200 1194 489 489 815 503 525 850 598 643 760
24x20 600x500 3,390 1397 1406 1397 489 591 940 503 525 850 598 643 760
22 550 3,930 1296 1305 1296 540 540 870 565 574 958 737 643 760
24 600 4,880 1397 1406 1397 591 591 940 604 612 1023 759 643 760
30x24 750x600 5,910 1651 1664 1651 591 737 1130 604 612 1023 759 643 760
26 650 5,830 1448 1460 1448 635 635 1015 638 649 1097 793 643 760
28 700 6,940 1549 1562 1549 686 686 1075 687 686 1172 836 643 760
30 750 8,560 1651 1664 1651 736 736 1130 727 726 1270 887 643 760
36x30 900x750 10,560 2083 2098 2083 736 876 1315 727 726 1270 887 643 760
32 800 9,940 1778 1794 1778 781 781 1195 760 767 1334 915 643 760
34 850 11,570 1930 1946 1930 832 832 1245 796 804 1408 951 643 760
36 900 13,530 2083 2098 2083 876 876 1315 832 838 1477 987 643 760
40 1000 18,570 2337 2337 2337 978 978 1320 931 936 1672 1212 643 760
42 1050 21,590 2437 2437 2437 1022 1022 1405 973 977 1755 1354 643 760
48 1200 31,550 2540 2540 2540 1168 1168 1595 1108 1113 2026 1555 643 760
56 1400 47,840 2949 2949 2949 1384 1384 1855 1270 1174 2348 1586 643 760
28 www.ufvalve.com
UF
DIMENSIONS & WEIGHTS - CLASS 900
A
SIZE WEIGHT B B1 C D E F G H I
RF RTJ WE
NPS DN (kg) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm)
2x 1 ½ 50x40 45 368 371 368 38 51 216 145 95 145 450 -- --
2 50 52 368 371 368 51 51 216 155 105 152 600 -- --
3x2 80x50 58 381 384 381 51 77 241 155 105 152 600 -- --
3 80 80 381 384 381 77 77 241 195 130 190 1000 -- --
4x3 100x80 105 457 460 457 77 102 292 195 130 190 1000 -- --
4 100 170 457 460 457 102 102 292 200 164 232 264 235 460
6x4 150x100 230 610 613 610 102 152 381 200 164 232 264 235 460
6 150 390 610 613 610 152 152 381 270 203 382 325 360 610
8x6 200x150 470 737 740 737 152 203 470 270 203 382 325 360 610
8 200 640 737 740 737 203 203 470 295 260 485 355 410 610
10x8 250x200 730 838 841 838 203 254 545 295 260 485 355 410 610
10 250 1,070 838 841 838 254 254 545 390 321 595 560 580 760
12x10 300x250 1,200 965 968 965 254 305 610 390 321 595 560 580 760
12 300 1,610 965 968 965 305 305 610 446 377 700 521 580 760
14x12 350x300 1,695 1029 1038 1029 305 324 640 446 377 700 521 580 760
16x12 400x300 1,790 1130 1140 1130 305 375 705 446 377 700 521 580 760
14 350 1,560 1029 1038 1029 324 324 640 377 420 640 452 580 760
16x14 400x350 1,800 1130 1140 1130 324 375 705 377 420 640 452 580 760
16 400 2,240 1130 1140 1130 375 375 705 459 470 740 549 580 760
18x16 450x400 2,520 1219 1232 1219 375 425 785 459 470 740 549 580 760
20x16 500x400 2,970 1321 1333 1321 375 473 855 459 470 740 549 580 760
18 450 3,000 1219 1232 1219 425 425 785 504 511 822 594 580 760
20x18 500x450 3,400 1321 1333 1321 425 473 855 504 511 822 594 580 760
20 500 4,360 1321 1333 1321 473 473 855 556 562 924 711 643 760
24x20 600x500 5,580 1549 1568 1549 473 571 1040 556 562 924 711 643 760
24 600 7,030 1549 1568 1549 571 571 1040 640 650 1100 795 643 760
30x24 750x600 8,980 1880 1902 1880 571 714 1230 640 650 1100 795 643 760
26 650 8,270 1651 1674 1651 619 619 1085 680 688 1176 835 643 760
28 700 10,200 1753 1775 1753 667 667 1170 725 735 1270 880 643 760
30 750 12,440 1880 1902 1880 714 714 1230 775 789 1378 1046 643 760
36x30 900x750 15,650 2286 2315 2286 714 857 1460 775 789 1378 1046 643 760
32 800 12,100 2032 2054 2032 762 762 1315 820 824 1448 1091 643 760
34 850 17,460 2159 2188 2159 810 810 1395 858 860 1520 1129 643 760
36 900 20,150 2286 2315 2286 857 857 1460 900 900 1600 1171 643 760
40 1000 44,170 2540 * 2540 956 956 1512 970 1120 1810 1195 643 760
42 1050 23,620 2667 2696 2667 1006 1006 * 1060 1200 1900 1220 643 760
48 1200 32,830 * * * 1149 1149 * 1150 1330 2160 1319 643 760
www.ufvalve.com 29
UF
DIMENSIONS & WEIGHTS - CLASS 1500
A
SIZE WEIGHT B B1 C D E F G H I
RF RTJ WE
NPS DN (kg) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm)
2x 1 ½ 50x40 45 368 371 368 38 51 216 145 95 145 450 -- --
2 50 55 368 371 368 51 51 216 155 105 152 600 -- --
3x2 80x50 75 470 473 470 51 77 267 155 105 152 600 -- --
3 80 105 470 473 470 77 77 267 195 130 190 1000 235 460
4x3 100x80 130 546 549 546 77 102 311 195 130 190 1000 235 460
4 100 205 546 549 546 102 102 311 200 164 285 255 235 460
6x4 150x100 300 705 711 705 102 146 394 200 164 285 255 235 460
6 150 525 705 711 705 146 146 394 258 229 420 318 360 610
8x6 200x150 615 832 841 832 146 194 483 258 229 420 318 360 610
8 200 880 832 841 832 194 194 483 335 302 530 410 580 760
10x8 250x200 1,085 991 1000 991 194 241 585 335 302 530 410 580 760
10 250 1,560 991 1000 991 241 241 585 392 350 645 467 580 760
12x10 300x250 1,850 1130 1146 1130 241 289 675 392 350 645 467 580 760
12 300 2,355 1130 1146 1130 289 289 675 492 426 780 567 580 760
14x12 350x300 2,620 1257 1276 1257 289 317 750 492 426 780 567 580 760
16x12 400x300 2,890 1384 1406 1384 289 362 825 492 426 780 567 580 760
14 350 3,020 1257 1276 1257 317 317 750 470 483 766 560 580 760
16 400 4,260 1384 1406 1384 362 362 825 524 539 878 614 663 760
18 450 6,400 1537 1559 1537 407 407 916 595 606 1012 750 663 760
20 500 9,300 1664 1686 1664 457 457 985 680 695 1190 835 663 760
24 600 14,550 2043 2071 2043 534 534 1170 758 775 1350 1029 663 760
26 650 8,460 1981 2010 1981 597 597 * 901 973 1536 1191 663 760
28 700 9,680 2032 2061 2032 641 641 * 941 1037 1651 1231 663 760
30 750 11,610 2286 2315 2286 686 686 * 1035 1066 1736 1325 663 760
32 800 13,200 2415 2444 2415 730 730 * 1060 1165 1869 1370 663 760
34 850 16,160 2743 * 2743 775 775 * 1140 1229 1984 1460 663 760
36 900 18,840 2743 2755 2743 819 819 * 1180 1306 2093 1530 663 760
30 www.ufvalve.com
UF
DIMENSIONS & WEIGHTS - CLASS 2500/4500
A
SIZE WEIGHT B B1 C D E F G H I
RF RTJ WE
NPS DN (kg) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm)
2x 1 ½ 50x40 65 451 454 451 38 44.5 235 140 95 150 600 -- --
2 50 93 451 454 451 44.5 44.5 235 145 170 200 198 185 360
3x2 80x50 165 578 584 578 44.5 63.5 305 145 170 200 198 185 360
3 80 215 578 584 578 63.5 63.5 305 190 205 275 245 235 460
4x3 100x80 280 673 683 673 63.5 89 356 190 205 275 245 235 460
4 100 385 673 683 673 89 89 356 225 240 350 280 360 610
6x4 150x100 540 914 927 914 89 133 483 225 240 350 280 360 610
6 150 830 914 927 914 133 133 483 305 285 480 380 410 610
8x6 200x150 1,150 1022 1038 1022 133 181 550 305 285 480 380 410 610
10x6 250x150 1,535 1270 1292 1270 133 226 675 305 285 480 380 410 610
8 200 1,435 1022 1038 1022 181 181 550 400 370 650 475 580 760
10x8 250x200 1,750 1270 1292 1270 181 226 675 400 370 650 475 580 760
12x8 300x200 2,264 1422 1445 1422 181 267 760 400 390 650 475 580 760
10 250 2,220 1270 1292 1270 226 226 675 470 435 770 560 643 760
12x10 300x250 2,650 1422 1445 1422 226 267 760 470 435 770 560 643 760
14x10 350x250 2,650 1651 1651 1651 226 267 760 470 435 770 560 643 760
12 300 3,350 1422 1445 1422 267 267 760 540 495 915 690 643 760
16x12 400x300 5,170 1962 1962 1962 267 352 760 540 495 915 690 643 760
14 350 5,090 1651 1651 1651 311 311 * 630 580 990 766 643 760
18x14 450x350 6,670 2134 2134 2134 311 397 * 630 580 990 766 643 760
16 400 6,160 1962 1962 1962 352 352 * 720 670 1100 856 643 760
20x16 500x400 8,955 2286 2286 2286 352 438 * 720 670 1100 856 643 760
18 450 8,630 2134 2134 2134 397 397 * 810 740 1215 970 643 760
20 500 11,640 2286 2286 2286 438 438 * 900 825 1325 1060 643 760
www.ufvalve.com 31
UF
DIMENSIONS & WEIGHTS - API 2000
2 9/16 296 333 296 230 130▲ 225 400 205 500
3 1/8 319 359 319 240 155 255 400 -- --
4 1/16 389 435 389 270 200 250 400 -- --
5 1/8 458 511 458 315 240 295 500 -- --
7 1/16 506 562 506 375 270 330 500 -- --
9 599 663 599 465 315 470 500 -- --
11 718 790 718 550 350 515 500 -- --
13 5/8 766 841 766 660 410 530 600 -- --
16 3/4 859 994 859 840 500 630 600 -- --
20 3/4 1101 1200 1101 1035 620 795 600 -- --
26 3/4 1334 1461 1334 1220 715 910 600 -- --
30 1529 1664 1529 1260 750 930 800 -- --
►REDUCED BORE - 2000psi
END TO END GEAR OPERATED LEVER OPERATED
SIZE WEIGHT F (C▲)C1
HUB RTJ WE EE ΦDD H L
NPS (kg) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm)
3 1/8 x 2 1/16 319 359 319 185 110▲ 175 400 170 500
UPON REQUEST
4 1/16 x 2 9/16 389 435 389 190 145▲ 210 400 180 500
4 1/16 x 3 1/8 389 435 389 230 185 250 400 -- --
5 1/8 x 4 1/16 458 511 458 255 195 235 400 -- --
7 1/16 x 4 1/16 506 562 506 255 195 250 500 -- --
9 x 7 1/16 599 663 599 355 250 310 500 -- --
11 x 9 718 790 718 430 290 365 500 -- --
13 5/8 x 11 766 841 766 525 355 520 500 -- --
16 3/4 x 13 5/8 859 994 859 615 400 555 500 -- --
21 1/4 x 16 3/4 1101 1200 1101 675 430 600 500 -- --
26 3/4 x 21 1/4 1334 1461 1334 940 585 690 600 -- --
30 x 26 3/4 1529 1664 1529 1165 730 865 600 -- --
Dimensions for flange x weld valves may be determined by adding half the length of the welding-ends valve to one half the length of the flanged-ends valve of the same pressure rating.
32 www.ufvalve.com
UF
DIMENSIONS & WEIGHTS - API 3000
2 9/16 372 422 372 230 130▲ 225 400 205 500
3 1/8 337 384 337 240 155 255 400 -- --
4 1/16 407 460 407 270 200 250 400 -- --
5 1/8 503 562 503 315 240 295 500 -- --
7 1/16 549 613 549 375 270 330 500 -- --
9 668 740 668 465 315 470 500 -- --
11 763 841 763 550 350 515 500 -- --
13 5/8 880 968 880 660 410 530 600 -- --
16 3/4 1040 1140 1040 840 500 630 600 -- --
20 3/4 1213 1334 1213 1035 620 795 600 -- --
26 3/4 1546 1673 1546 1220 715 910 600 -- --
30 1665 1800 1665 1260 750 930 800 -- --
►REDUCED BORE - 3000psi
END TO END GEAR OPERATED LEVER OPERATED
SIZE WEIGHT F (C▲)C1
HUB RTJ WE EE ΦDD H L
NPS (kg) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm)
3 1/8 x 2 1/16 337 384 337 210 120▲ 215 400 195 500
UPON REQUEST
4 1/16 x 2 9/16 407 460 407 230 130▲ 225 400 205 500
4 1/16 x 3 1/8 407 460 407 240 155 255 400 -- --
5 1/8 x 4 1/16 503 562 503 270 200 250 400 -- --
7 1/16 x 4 1/16 549 613 549 270 210 250 400 -- --
9 x 7 1/16 668 740 668 375 270 330 500 -- --
11 x 9 763 841 763 465 315 470 500 -- --
13 5/8 x 11 880 968 880 550 350 515 500 -- --
16 3/4 x 13 5/8 1040 1140 1040 660 410 530 600 -- --
21 1/4 x 16 3/4 1213 1334 1213 840 500 630 600 -- --
26 3/4 x 21 1/4 1546 1673 1546 1035 620 795 600 -- --
30 x 26 3/4 1665 1800 1665 1220 715 910 600 -- --
Dimensions for flange x weld valves may be determined by adding half the length of the welding-ends valve to one half the length of the flanged-ends valve of the same pressure rating.
www.ufvalve.com 33
UF
DIMENSIONS & WEIGHTS - API 5000
2 9/16 372 422 372 230 130▲ 225 400 205 500
3 1/8 416 473 416 260 175 260 400 -- --
4 1/16 487 549 487 340 220 325 500 -- --
5 1/8 595 676 595 390 270 445 500 -- --
7 1/16 618 711 618 435 330 475 500 -- --
9 739 842 739 540 355 545 500 -- --
11 880 1000 880 670 415 555 600 -- --
13 5/8 1018 1146 1018 735 450 590 600 -- --
16 3/4 1146 1276 1146 755 460 630 600 -- --
18 3/4 1393 1559 1393 940 560 745 600 -- --
21 1/4 1505 1686 1505 1060 635 820 800 -- --
►REDUCED BORE - 5000psi
END TO END GEAR OPERATED LEVER OPERATED
SIZE WEIGHT F (C▲)C1
HUB RTJ WE EE ΦDD H L
NPS (kg) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm)
3 1/8 x 2 1/16 416 437 416 210 120▲ 215 400 195 500
UPON REQUEST
4 1/16 x 2 9/16 487 549 487 230 130▲ 225 400 205 500
4 1/16 x 3 1/8 487 549 487 260 175 260 400 -- --
5 1/8 x 4 1/16 595 676 595 340 220 325 500 -- --
7 1/16 x 4 1/16 618 711 618 340 220 325 500 -- --
9 x 7 1/16 739 842 739 435 330 475 500 -- --
11 x 9 880 1000 880 540 355 545 500 -- --
13 5/8 x 11 1018 1146 1018 670 415 555 600 -- --
16 3/4 x 13 5/8 1146 1276 1146 735 450 590 600 -- --
18 3/4 x 16 3/4 1393 1559 1393 755 475 630 600 -- --
21 1/4 x 18 3/4 1504 1686 1504 940 940 745 600 -- --
Dimensions for flange x weld valves may be determined by adding half the length of the welding-ends valve to one half the length of the flanged-ends valve of the same pressure rating.
34 www.ufvalve.com
UF
DIMENSIONS & WEIGHTS - API 10000
2 1/16 479 521 479 270 200 285 400 280 500
2 9/16 513 565 513 325 220 325 500 -- --
3 1/8 560 619 560 325 220 325 500 -- --
4 1/16 599 670 599 415 200 400 500 -- --
5 1/8 809 889 809 570 375 590 500 -- --
7 1/16 934 1038 934 695 435 585 600 -- --
9 1171 1295 1171 905 540 720 600 -- --
11 1407 1549 1407 1050 615 835 600 -- --
13 5/8 1495 1664 1495 1110 665 920 800 -- --
16 3/4 * * * 1050 615 845 800 -- --
18 3/4 * * * 1120 670 925 800 -- --
21 1/4 * * * 1210 725 930 800 -- --
►REDUCED BORE - 10000psi
END TO END GEAR OPERATED LEVER OPERATED
SIZE WEIGHT F (C▲)C1
HUB RTJ WE EE ΦDD H L
NPS (kg) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm)
2 1/16 x 1 13/16 479 521 479 230 170 250 400 260 500
UPON REQUEST
2 9/16 x 1 13/16 513 565 513 230 170 250 400 260 500
3 1/16 x 2 1/16 560 619 560 270 200 285 400 280 500
4 1/16 x 3 1/16 599 670 599 325 220 325 500 -- --
5 1/8 x 4 1/16 809 889 809 415 200 400 500 -- --
7 1/16 x 5 1/8 934 1038 934 570 375 590 500 -- --
9 x 7 1/16 1171 1295 1171 695 435 585 600 -- --
11 x 9 1407 1549 1407 905 540 720 600 -- --
13 5/8 x 11 1495 1664 1495 1050 615 835 600 -- --
16 3/4 x 13 5/8 * * * 1110 665 920 800 -- --
18 3/4 x 16 3/4 * * * 1050 615 845 800 -- --
21 1/4 x 18 3/4 * * * 1120 670 925 800 -- --
Dimensions for flange x weld valves may be determined by adding half the length of the welding-ends valve to one half the length of the flanged-ends valve of the same pressure rating.
*available upon request
www.ufvalve.com 35
UF
DIMENSIONS & WEIGHTS - API 15000
Dimensions for flange x weld valves may be determined by adding half the length of the welding-ends valve to one half the length of the flanged-ends valve of the same pressure rating.
*available upon request
36 www.ufvalve.com
UF
DIMENSIONS & WEIGHTS - API 20000
Dimensions for flange x weld valves may be determined by adding half the length of the welding-ends valve to one half the length of the flanged-ends valve of the same pressure rating.
*available upon request
www.ufvalve.com 37
UF
TOP WORKS DATA PER ISO 5211
38 www.ufvalve.com
UF
Cv FLOW COEFFICIENTS
CLASS
BORE
150 300 600 900 1500 2500
NPS DN
1/2 15 25 25 20 16 16 14
3/4 20 56 56 48 34 34 31
1 25 95 95 93 69 63 42
1-1/4 32 153 136 120 113 113 58
1-1/2 40 308 308 308 165 165 92
2x1-1/2 50x40 140 140 135 125 125 96
2 50 500 420 350 320 320 250
3x2 80x50 220 210 190 185 180 200
3 80 1390 1050 1000 910 820 735
4x3 100x80 630 600 560 505 500 560
4 100 2550 2000 1850 1760 1610 1100
6x4 150x400 925 910 800 735 735 745
6 150 5249 5186 4400 4300 4080 2530
8x6 200x150 2500 2498 2150 2010 2005 1485
8 200 10750 10262 8450 8400 7980 5310
10x8 250x200 5000 4990 4500 4160 4150 3310
10 250 17775 17220 14250 14160 13020 8440
12x10 300x250 8400 8390 8000 7300 7280 5950
12 300 26750 25950 22790 21230 19610 13000
14x12 350x300 14080 14040 13990 13920 13810 ---
16x12 400x300 9030 9020 9010 9000 8990 ---
14 350 32600 30900 28600 26600 24080 ---
16x14 400x350 14780 14750 14720 14690 14100 ---
16 400 44700 42600 39250 36600 33110 ---
18x16 450x400 20840 20820 20750 20700 19100 ---
20x16 500x400 15300 15300 15300 13800 12000 ---
18 450 58500 56450 52000 50540 50360 ---
20x18 500x450 28100 28000 27850 25000 25000 ---
20 500 76000 72700 70500 69700 64750 ---
24x20 600x500 28200 28200 28000 25100 20600 ---
22 550 68200 68200 68200 62000 54000 ---
24 600 113500 109450 99000 86750 77460 ---
30x24 750x600 36000 36000 36000 32900 --- ---
26 650 110000 110000 110000 98500 --- ---
28 700 121000 121000 121000 113000 --- ---
30 750 145000 144000 144000 130000 --- ---
36x30 900x750 64000 64000 64000 61500 --- ---
32 800 170000 170000 170000 151000 --- ---
36x32 900x800 87000 87000 87000 69500 --- ---
36 900 210000 210000 210000 198200 --- ---
40 1000 267500 267500 267500 --- --- ---
42x36 1050x900 96700 96700 96000 --- --- ---
42 1050 280000 280000 280000 --- --- ---
48 1200 384000 384000 384000 --- --- ---
56x42 1400x1050 89000 89000 89000 --- --- ---
56 1400 521000 521000 521000 --- --- ---
www.ufvalve.com 39
UF
ACTUATION & WORM GEAR
WG008 3” to 6” 3” to 6” 3” to 6” 3” to 4” 3” to 4” 3”
WG108 8” 8” -- 6” 6” --
WG308 12” to 20” 12” to 20” 12” to 18” 10” to 18” 8” to 14” 8”
WG408 24” to 30” 24” to 30” 20” to 28” 20” to 24” 16” to 20” 10” & 12”
WG508 32” & above 32” & above 30” & above 26” & above 24” & above 16” & above
For operating torque over 320 NM, we recommend manual gear operators. All gears are fully enclosed and
include a ball position indicator.
UF Trunnion Mounted ball valves can be supplied with pneumatic, electric or hydraulic actuation.
40 www.ufvalve.com
UF
PRESSURE TEMPERATURE CHART
6500
CL.2500
6000
5500
5000
A105
BUNA SEALS
4500
4000
CL.1500
PEEK
PRESSURE(psi)
3500
3000
A105
PCTFE
2000 2500
CL.900 DEVLON V
NYLON A105
CL.600
1500
AFLAS SEALS
A105
R-PTFE
1000
CL.300
A105
SEALS
VITON
500
CL.150
A105
TEMPERATURE
Pressure Rating (psi) Low Temperature Limits
Material Material °F °C
A105/A350LF2 A182 F316 A105 -20 -29
150LB 285 275 A350 LF2 -50 -46
300LB 740 720
600LB 1480 1440
900LB 2220 2160
1500LB 3705 3600
2500LB 6170 6000
www.ufvalve.com 41
UF
MATERIAL SPECIFICATIONS
A105 0.35 0.60-1.05 0.035 0.040 0.10-0.35 0.40 0.30 0.12 0.40 0.050 0.020 ---
A350 LF2 CL2 0.30 0.60-1.35 0.035 0.040 0.15-0.30 0.40 0.30 0.12 0.40 0.05 0.020 ---
A350 LF3 CL2 0.20 0.90 0.035 0.040 0.20-0.35 0.40 0.30 0.12 3.3-3.7 0.03 0.020 ---
A694 F52 0.030 1.50 0.030 0.030 0.13-0.37 --- --- --- --- --- --- ---
A694 F60 0.030 1.50 0.030 0.030 0.13-0.37 --- --- --- --- --- --- ---
A182 F304 0.08 2.00 0.045 0.030 1.00 --- 18.0-20.0 --- 8.0-11.0 --- --- ---
A182 F316 0.08 2.00 0.045 0.030 1.00 --- 16.0-18.0 2.00-3.00 10.0-14.0 --- --- ---
A182 F304L 0.030 2.00 0.045 0.030 1.00 --- 18.0-20.0 --- 8.0-13.0 --- --- ---
A182 F316L 0.030 2.00 0.045 0.030 1.00 --- 16.0-18.0 2.00-3.00 10.0-15.0 --- --- ---
A182 F6A 0.15 1.00 0.040 0.030 1.00 --- 11.5-13.5 --- 0.50 --- --- ---
A182 F6NM 0.05 0.5-1.0 0.030 0.030 0.60 --- 11.5-14.0 0.5-1.0 3.5-5.5 --- --- ---
A182 FXM19 0.06 4.0-6.0 0.040 0.030 1.00 --- 20.5-23.5 1.50-3.00 11.5-13.5 --- --- 0.20-0.40
A182 F51 0.030 2.00 0.030 0.020 1.00 --- 21.0-23.0 2.5-3.5 4.5-6.5 --- --- 0.08-0.20
A182 F53 0.030 1.20 0.035 0.020 0.80 0.50 24.0-26.0 3.0-5.0 6.0-8.0 --- --- 0.24-0.32
A182 F44 0.020 1.00 0.030 0.010 0.80 0.50-1.00 19.5-20.5 6.0-6.5 17.5-18.5 --- --- 0.18-0.22
A193 B7 0.37-0.49 0.65-1.10 0.035 0.040 0.15-0.35 --- 0.75-1.20 0.15-0.25 --- --- --- ---
A193 B7M 0.37-0.49 0.65-1.10 0.035 0.040 0.15-0.35 --- 0.75-1.20 0.15-0.25 --- --- --- ---
A194 2H 0.40 1.00 0.040 0.050 0.40 --- --- --- --- --- --- ---
A194 2HM 0.40 1.00 0.040 0.050 0.40 --- --- --- --- --- --- ---
A193 B8 0.08 2.00 0.045 0.030 1.00 --- 18.0-20.0 --- 8.0-11.0 --- --- ---
A193 B8M 0.08 2.00 0.045 0.030 1.00 --- 16.0-18.0 2.00-3.00 10.0-14.0 --- --- ---
A194 8 0.08 2.00 0.045 0.030 1.00 --- 18.0-20.0 --- 8.0-11.0 --- --- ---
A194 8M 0.08 2.00 0.045 0.030 1.00 --- 16.0-18.0 2.00-3.00 10.0-14.0 --- --- ---
A320 L7 0.38-0.48 0.75-1.00 0.035 0.040 0.15-0.35 --- 0.80-1.10 0.15-0.25 --- --- --- ---
A320 L7M 0.38-0.48 0.75-1.00 0.035 0.040 0.15-0.35 --- 0.80-1.10 0.15-0.25 --- --- --- ---
A194 7 0.37-0.48 0.65-1.10 0.040 0.040 0.15-0.35 --- 0.75-1.20 0.15-0.25 --- --- --- ---
A194 7M 0.37-0.49 0.65-1.10 0.040 0.040 0.15-0.35 --- 0.75-1.20 0.15-0.25 --- --- --- ---
A194 4 0.40-0.50 0.70-0.90 0.035 0.040 0.15-0.35 --- --- 0.20-0.30 --- --- --- ---
A216 WCB 0.30 1.00 0.040 0.045 0.60 --- 0.50 0.02 0.50 0.030 0.30 ---
42 www.ufvalve.com
UF
MATERIAL SPECIFICATIONS
A194 2HM --- --- --- --- --- --- --- 159-237
www.ufvalve.com 43
UF
SPECIFICATIONS FOR SEAT & SEAL MATERIALS
* Hardness, ASTM D785. “Standard test method for rockwell hardness of plastics and electrical insulating materials.”
Other materials are also available upon request.
44 www.ufvalve.com
UF
TERMS AND CONDITIONS OF SALE
ACCEPTANCE: All orders based on Universal Flow (UF) quotations shall be subject to acceptance in writing by UF. This acceptance is
expressly made conditional on assent by you to any of our terms, set forth below, which are different or additional from those contained in your
purchase order.
PRICES: Quotations are valid for thirty days unless otherwise stated in writing and are subject to withdrawal or change at any time prior to
acceptance by UF. Prices are FOB factory. Prices are firm for sixty days from date of acceptance of order. If for any reason shipment is not
made within the sixty days, prices in effect at time of shipment will apply unless otherwise stated in writing. UF reserves the right to invoice
customer for any or all finished material ready for shipment, when held at customer’s request or because of other reasons beyond UF’s
control. Every sales tax, use or other excise tax which UF may be required by law to pay on or in connection with the sale will be added to the
prices quoted, and UF reserves the right to bill such expense at the time of invoicing material or any subsequent time without forfeiture of
collection rights. All orders are subject to any Federal, State or other Governmental regulation that may be in effect or later become effective.
Typographical and clerical error in quotations or orders are subject to correction. Prices for valve power operators, if quoted, include
installation and adjustment of operators in factory prior to shipment. Prices do not include field or job site installation unless otherwise so
stated. Minimum order charges apply.
PAYMENT: In the case of orders for delivery to overseas points, UF reserves the right to require before commencement of work, assurance
of payment in the form of a letter of credit or an equivalent acknowledged by UF, satisfactory to it. There will be a 1.5 percent per month
interest charge on accounts not paid 30 days after date of invoice. Orders will be invoiced when shipped, provided however, that UF reserves
the right to invoice the customer for any or all finished material ready for shipment, when held at customer’s request or when shipment is
delayed because operators or other components specified by customer are late or defective.
DELIVERY: Products are sold ex-works factory. The risk of loss of the products shall pass to the customer when the products are delivered to
the carrier for transportation to customer.
SHIPPING DATE: All promises of shipment are estimated as closely as possible and dates offered represent shipping date rather than
delivery to destination date. UF’s best efforts are used in every case to ship within the time promised; but there is no guarantee to do so.
Schedules commence with the date UF receives authorization to proceed with order and accepts order. If drawings are submitted, promise
of shipment dates from the day they are approved and returned to UF. Products offered from stock are subject to prior sale.
DESIGN: Because of a policy of continuous product improvement, UF reserves the right to change designs, material or specifications without
notice or without obligation to furnish or install such changes on products previously or subsequently provided.
CANCELLATION: Orders accepted by UF are not subject to cancellation except with the consent of UF and upon terms, which will indemnify
UF against loss or damage occasioned by such cancellation.
INSPECTION: Final inspection and acceptance of products must be made at factory and shall be conclusive except for latent defects.
Customer’s representatives may inspect, at such plant, during normal business hours prior to shipment in such manner as will not interfere
with operations.
GOVERNMENT SALES: UF reserves the right to sell directly to Federal and State governments municipalities and public authorities, and to
the prime contractors and/or subcontractors of such government, municipalities and authorities and UF reserves the right to cancel any order
for products intended by the customer to be resold or delivered to such entities.
WARRANTY: All products manufactured by UF are warranted against defects of material or workmanship for a period of one years from the
date shipped when these products are used within the service and pressure range for which they were manufactured. This warranty is limited
to replacement, without charge, of parts found by UF to be defective in material or workmanship and does not extend to claims for labor,
expense or other loss or damage occasioned by such defect. This warranty does not cover deterioration by corrosion, erosion or any cause
of failure other than defect of material or workmanship. Purchasers are expected to determine the suitability of UF products for their particular
purpose. UF shall not be liable for prospective profits or special, indirect or consequential damages, whether or not UF is negligent, or shall
any recovery of any kind against UF be greater in amount that the purchase prices of the specific product sold and causing the alleged loss,
damage or injury. No action of customer arising out of the sale shall be commenced later than one year after the cause of action has accrued.
THIS WARRANTY IS IN PLACE AND IN LIEU OF ALL WARRANTIES OF MERCHANTABILITY AND FITNESS AND ANY OTHER
WARRANTY.
RETURNS: No material may be returned for credit or adjustment without permission and return tagging instructions in writing from UF. On all
material approved for return for credit, handling, restocking costs, if any, and cost to recondition for resale as new, will be charged.
EXPORT PACKING: Export packing charges, when applicable, will be added to orders specifying such packing.
www.ufvalve.com 45
UF
info@ufvalve.com
www.ufvalve.com