Professional Documents
Culture Documents
P743
TICS
Tissues Implementation Conformance
Statement
Platform Hardware Version: K
Platform Software Version: 51
Publication Reference: P74x-TC-EN-Na7
© - ALSTOM 2014. All rights reserved. Information contained in this document is indicative only. No representation or warranty is given or should be relied on that it
is complete or correct or will apply to any particular project. This will depend on the technical and commercial circumstances. It is provided without liability and is
subject to change without notice. Reproduction, use or disclosure to third parties, without express written authority, is strictly prohibited.
MiCOM P40 Agile P741, P743 TICS
CONTENTS
P74x-TC-EN-Na7 1
TICS MiCOM P40 Agile P741, P743
2 P74x-TC-EN-Na7
MiCOM P40 Agile P741, P743 TICS
1.1 Introduction
This document specifies the conformance level of MiCOM Px40 range products to the logged
Technical Issues (TISSUES) against the IEC 61850 set of standards. According to the UCA IUG
QAP, the Technical Issues Conformance Statement is required to perform a conformance test and is
referenced on the certificate.
For more details on the logged Technical Issues, refer to the website:
http://www.tissues.iec61850.com
The below table gives an overview of the implemented IntOp Tissues and testing status.
Tissues 45, 46, 49, 190 and 278 are not mandatory, all other (technical) Tissues in the table are
mandatory if applicable.
P74x-TC-EN-Na7 3
TICS MiCOM P40 Agile P741, P743
4 P74x-TC-EN-Na7
MiCOM P40 Agile P741, P743 TICS
P74x-TC-EN-Na7 5
TICS MiCOM P40 Agile P741, P743
6 P74x-TC-EN-Na7
PXXX
Product Description
Alstom Grid
www.alstom.com