Professional Documents
Culture Documents
Workshop Manual W3023EN3.pdf Workshop Manual W3023EN3 PDF
Workshop Manual W3023EN3.pdf Workshop Manual W3023EN3 PDF
W3023EN3.pdf
Electric circuit diagrams
Vibratory roller
CA250/280/300 Tier I
CA250/260/280 Tier III
Subject to changes
Printed in Sweden
Table of Contents
Introduction .............................................................................................................................. 1
Warning symbols ....................................................................................................... 1
Safety information...................................................................................................... 1
General...................................................................................................................... 1
Safety regulations .................................................................................................................... 3
Before start.................................................................................................. 3
Start............................................................................................................. 3
Jump starting............................................................................................... 3
Electrical and hydraulic equipment ............................................................. 4
Type of Electrical circuit diagram ............................................................................................. 5
DYNAPAC electric wiring standard ........................................................................... 5
Wiring system.............................................................................................. 5
Electrical circuit diagrams ........................................................................................................ 9
2010-04-16 W3023EN3.pdf
stl
W3023EN3.pdf 2010-04-16
stl
Introduction
Introduction
Warning symbols
Safety information
General
- Familiarize yourself with the equipment on the
machine.
- Only operate the machine if you are familiar with how
the controls work and how the machine functions.
- Use your safety equipment such as helmet,
protective shoes and hearing protection.
- Familiarize yourself with the machine's area of work.
- Only use the machine for its intended purpose.
2010-04-16 W3023EN3.pdf
1
Introduction
W3023EN3.pdf 2010-04-16
2
Safety regulations
Safety regulations
Before start
Start
Jump starting
2 1
Turn the ignition and all power consuming equipment
off. Switch off the engine on the machine which is
providing jump start power.
First connect the jump start battery's positive terminal
(1) to the flat battery's positive terminal (2).Then
3 connect the jump start battery's negative terminal (3)
to, for example, a bolt (4) or the lifjting eye on the
machine with the flat battery.
4 Start the engine on the power providing machine. Let it
run for a while. Now try to start the other machine.
Disconnect the cables in the reverse order.
Fig. Jump starting
2010-04-16 W3023EN3.pdf
3
Safety regulations
A fully equipped medical kit, including eye-wash facilities, should be available and
protective clothing, including eye protection, should be worn.
Acid splashes in the eye should be treated immediately with plenty of clean water and
neutralized with sodium bicarbonate solution.
Acid splashes on clothing must be treated with an alkali, such as ammonia, if holes are to
be avoided.
A safety hazard exist during or after battery charging due to emission of a highly
flammable hydrogen gas. Any testing involving production of sparks, e.g. electrical load
test, must not be performed until the gas has dispersed from the cell. A similas hazard
occurs when a battery is fitted on to a vehicle immediately after the battery has been
removed from a charging plant.
Hydraulic equipment is under high pressure. Fluids (fuel, hydraulic oil) which escape
under high pressure can penetrate the skin and cause serious injury. Therefore
immediately consult a doctor if such injury occurs.
Notice that failure on the hydraulic or electrical system may give the roller an
unpredictable and dangerous function.
W3023EN3.pdf 2010-04-16
4
Type of Electrical circuit diagram
Wiring system
Cable colours and number marking
2. Grouping of conductors
In order to establish a uniform identification of wiring
systems within a limited extent of cable colours each
circuit has to be associated with one of the following
nine (9) groups, using the feature or function of the
component.
One cable colour hs to be used for each group.
Individual cables within each group are identified by a
three (3)-digit code, where the first digit indicates the
colour of the cable.
2010-04-16 W3023EN3.pdf
5
Type of Electrical circuit diagram
W3023EN3.pdf 2010-04-16
6
Type of Electrical circuit diagram
Example
2010-04-16 W3023EN3.pdf
7
Type of Electrical circuit diagram
W3023EN3.pdf 2010-04-16
8
1 2 3 4 5 6
Rev. Pls. Change No. Date Issued by Checked
F11
Rev.970401
K11.X1:30 205 RD A X.40 205 RD 1 1 2 F11.X1
/5.B1
15.18 6.00 mm² X40 A 6.00 mm² F11.X1 40A 2
30.3 15.2
243 BK
16.00 mm² =Batteriswitch
202 RD B X.9 202 RD
=Main fuse 901
X9 B Q1
31.6
31.3
6.00 mm² 6.00 mm² BK
219 RD 4.00 mm² A7 F10.X1 1
F10 2 F10.X1 201 RD Q.X1 1 1.1
6.00 mm² A X.9 901 BK 1 1
X.29 604 YE 27 1 40A 2 6.00 mm² Q1.X2 1.2 X9 A 31A.X1
c1.p27 6.00 mm² 31B.X1
B 0.75 mm² A1.X1 ECU 1 1.3 G1 =Batteri A
S1 X.29 605 YE 28
c1.p28 1.4 2 X.38 298 BK
X.37+ X.36 999 BK 1
A 0.75 mm² A1.X1 1 31A.X2
P 208 RD 4.00 mm² Q1.X5 1.5 70.00 mm² 1 1 70.00 mm²
0 1
l X.29 920 BK 30 255,255 RD,RD Q1.X6 1.6
c1.p30 1
ll C 0.75 mm² A1.X1 6.00 mm²,6.00 mm² Q1.X7 1.7
lll
1
58 M1 =Startmotor
1 30a 19b 299 BK 70.00 mm² M1.X1
19a #2687.1 /8.A1 30
S1.X11 1
30b 17a F12.X1:1, F12.X2:1 /9.C1
X.89 17b M1.X2
30
244 1
E
RD 15 S1.X2 311 VT 15 209 RD 1 50
c1.p15
4.00 mm² 5 230 RD 15.17 A1.X1 4.00 mm² M1.X3
54 0.75 mm²
F1.78:8.1
/5.B1 =Start
M1.X4
1
K11.X1:86
K1
15.7
A G2.X1
RD /3.A4
1 G2.X2
K2
G2.X1
S2.X3 1 X.503 0.75 mm²
#2686.1
2.50 mm²
B
1 86 85 K2.X1 907 BK
K2.X1 2
G2
D+ B+ W
213
/8.A1
/9.C1
1
G2.X4
2.50 mm² 2.50 mm²
Y1
3 X.6 213 RD 1 A1.X1 309 VT 0.75 mm² Y1.X1 WH 31A.X24
c1.p01 c1.p14
222 RD 275.3 X6 3 2.50 mm² A1.X1 14 2 1
/2.A1 =Parking brake
X.4:10 BK Y1.X1 1
2.50 mm²
S14 l 3 31A.X7
X.507 1
401 OR 4 0 Y1.X1 RD
c1.p04 1
0.75 mm² A1.X1
910 BK 1
702 BU 3 31A.X8 C
c1.p03 c1.p13 A1.X1 303 VT5 X.4 303 VT S.14.X1 3
A1.X1 S.14.X1 306 VT 6 X4
0.75 mm² 2
=Driving
13 0.75 mm² X4 5
0.75 mm²
2
1 1 X.4 6 Y2 =Break
R1 R1.X1
B 236 RD S.14.X1 6
A R1.X1 908 BK 5 c1.p9 A1.X1 5 5 S.14.X1 317 VT 7 X.6 1 1 2 Y.2.X1 905 BK 31A.X4
c1.p05 0.75 mm² 4
R1.X1 C 0.75 mm² A1.X1 9 4 0.75 mm² X6 7 Y.2.X1 2 1
communicated to any third part or used for manufacturing purposes.
and may not without the permission of the said company be copied,
225
RD c1.p2 7 8
This document will remain the property of Metso Dynapac AB
A1.X1
2
317 VT 0.75 mm²
903 BK 1.00 mm² 1
S12.X1:2
31A.X5
31.34
31.35
30.10
15.13
275.4
/2.A6
/2.A6
/2.A1
/2.A1
/4.C1
TKZ/GE TKZ/LW
View Date Description Model D
20070125 Circuit diagram CA250 T1
Wire area 1.5 mm unless otherwise stated E Reg.
Start and stop
Scale Sheet / of
1 / 14
Ledningsarea 1.5 mm där annat ej anges Kretsschema Rev. No.
Start och stopp 393809
1 2 3 4 5 6
Rev. Pls. Change No. Date Issued by Checked
Rev.970401
/1.D1
/1.D1
/1.D6
/1.D6
A7
15.13
30.10
ECU
31.34
31.35
601 YE 1 X4 601 YE 17
c1.p17
0.75 mm² X.4 1 0.75 mm² A1.X1 A
=Buzzer
H10
H10.X
31.29 223 RD H10.X+1
/4.B2
X.508 1
275.3 222 RD
/1.C1 =Seat switch
X.507
S5
X.502
2.50 mm²
NC A S5.X1
X.4
A
10
1 217 RD C C C
S5.X1 B S5.X1 313 VT 0.75 mm² 16
10 0.75 mm² N0
c1.p16
X4 B A1.X1
275.1
C
communicated to any third part or used for manufacturing purposes.
and may not without the permission of the said company be copied,
This document will remain the property of Metso Dynapac AB
31.19
31.7
/3.A6
15.11
30.9
TKZ/GE TKZ/LW
/3.A1
/3.A1
Start and stop 2 / 14
Kretsschema Rev. No.
Start och stopp 393809
1 2 3 4 5 6
Rev. Pls. Change No. Date Issued by Checked
Rev.970401
/2.D1
/2.D1
/2.D6
15.11
30.9
801 BN #2066.2
A1
31.15
31.19
/1.B5
V1:A
0.75 mm² ECU
802 BN 0.75 mm² 24
c1.p24
A1.X1
A
4 X.6 802 BN 0.75 mm² 25
c1.p25
X6 4 A1.X1
1 X.509
26
c1.p26 c1.p35
X.503 1
A1.X1
A1 802 BN
229 RD 0.75 mm²
0.75 mm² Hour Meter 808 806
31.31 228 RD 7 V + Enable A8.X34 BN BN
/4.B2
X.508 A8.X33 J1:7
H J2:9 9 Fuel sender
0.75 mm² 0.75 mm²
231 Fuel lev.
B3
RD Keyswitch
2 A8.X33 803 BN 0.75 mm²8 X4 803 BN 0.75 mm² B3.X1 1 2 B3.X2 913 BK 1 Fuel
0.75 mm² A8.X34 J2:2
B J1:8 8 X.4 8 1 Fuel 1 0.75 mm² 31A.X9
Low fuel
Engine temp
B2
Charging
Eng.Temp
7 X4 805 BN 805 BN 0.75 mm² 1
X.4 7 B2.X1
B
Eng. temp. 0.75 mm²
A8.X33 805 BN 0.75 mm² Engine pressure
X.504 1
J1:1 1
B10
Eng. press.
P Eng.Pressure
A8.X34 807 BN 0.75 mm² 9 X4 807 BN 0.75 mm² 807 BN 1 1 2
J2:8 8 X.4 9 B10.X1
0.75 mm²
X.505 1
Brake
A8.X34 307 VT 3 X4 307 VT Hydraulik oil temp
/2.B4
J2:3 3 0.75 mm² X.4 3 #765.3
1 R2 2 =1.5 Kohm
0.75 mm² B1
Hydraulic
A8.X34 809 BN 0.75 mm² X6 X.6 809 BN 0.75 mm² B1.X1 1 2 Hyd.oil temp
J2:4 4 10 10 1
Air filter Air filter
A8.X34 810 BN 0.75 mm² 11 X.6 810 BN 0.75 mm²
J2:5 5 X6 11
B4
P
1 1 2 B4.X2 915 BK 31A.X10 Air filter
B4.X1 1 0.75 mm² 1
Glowing
V A8.X33 931 BK 0.75 mm² 1 C
J1:5 5 31B.X4
A8.X34
J2:10 10
communicated to any third part or used for manufacturing purposes.
and may not without the permission of the said company be copied,
This document will remain the property of Metso Dynapac AB
31.12
31.1
30.2
15.1
/4.A6
/4.A6
/4.A1
/4.A1
TKZ/GE TKZ/LW
View Date Description Model D
20070125 Circuit diagram CA250 T1
Wire area 1.5 mm unless otherwise stated E Reg.
Warning panel
Scale Sheet / of
3 / 14
Ledningsarea 1.5 mm där annat ej anges Kretsschema Rev. No.
5 6 Varningspanel 393809
1 2 3 4 5 6
Rev. Pls. Change No. Date Issued by Checked
Rev.970401
/3.D1
/3.D1
/3.D6
/3.D6
=Horn switch
30.2
15.1
S3
31.1
31.12
l =Horn
0
604 YE H11.X2 2
H11
1
A
3 Horn
S3.X1
2.1 B.1 F1.12 226 RD S3.X1 3 3 1
F1.2 B.1 2 2
H11.X1
1
1
2.2 10A B.2 F1.12 227 RD #1730.1
/8.C1
B.2 X70
6
5
4 932 BK 1
31B.X5 Horn
X.508 1 7 8
X71
223 228 /8.D1
#1731.1
RD RD
H10.X+
=Backup alarm
X.509
31.29
31.31
A1.X1 603 YE 0.75 mm² 1 1
H13
1
18 H13.X1 X246
/3.A1
/2.A2
A7 2
c1.p18
X246
2
ECU Backup
H13.X1
2
alarm
B
1
31A.X11
=Vibration valve Low
=Vibration on/off
S6
communicated to any third part or used for manufacturing purposes.
and may not without the permission of the said company be copied,
S6.X1 2 31A.X14
942 BK 0.75 mm² 1
31B.X6
30.5
15.4
31.2
31.5
/5.A6
/5.A6
/5.A1
/5.A1
TKZ/GE TKZ/LW
View Date Description Model D
20070125 Circuit diagram CA250 T1
Wire area 1.5 mm unless otherwise stated E Reg.
Horn vibb and backup alarm
Scale Sheet / of
4 / 14
Ledningsarea 1.5 mm där annat ej anges Kretsschema Rev. No.
Signalhorn,vibb och backalarm 393809
1
1 2 3 4 5 6
Rev. Pls. Change No. Date Issued by Checked
Rev.970401
=Rotating beacon switch
S18
/4.D1
/4.D1
#1724.1
l /7.C2
/4.D6
/4.D6
X.7.1:1 =Rotating beacon
0
15.4
30.5 H14
31.5
31.2
S18.X1 610 YE 4 X4 610 YE 1 X7 610 YE 1 1
4.1
F1.4
D.1 F1.34 224 RD S18.X1
2
3 3 X.4 4 X.7 1 H14.X1 M
D.1 2
1
Rotating
A
4.2 10A D.2 2
beacon
H14.X2
1
611
6 YE
5
4 927 BK 2 X.7 927 BK 1
S18.X1 S18.X1 0.75 mm² X7 2 31A.X15
7 7 8 8 X.7.1:2
/7.C2
929 BK 0.75 mm² 31.41 1
31B.X7
1
31B.X11
=Working light front left
E5
1 1 2 E5.X2 932 BK 2.50 mm² X8.1
Rear left
K11 E5.X1 1 2
X13.1
X8.1
#477.1
/7.B2 =Working light rear left
X.13.1:1
1
=Working light switch
E2 Rops
S22 1 X13.2 101 WH E2.X1 1 2 E2.X1 930 BK 2 X.13 930 BK 1
l
X.13 1 1 2 X13.2 2 2.50 mm² 31A.X16 Rear left
1.1 1.1 A.1 F2.12 232 RD 2.50 mm² 2.50 mm²
F2.12 F2.1 A.1
4.00 mm²
0
=Working light front left
1.2 20A A.2 103 931
S22.X1 101 WH 11 X4 101 WH
S22.X1 3 3 X.4 11
WH E1 BK
2 2 2.50 mm² 2.50 mm² 1 2
1 234 E1.X1 E1.X1 Front left
RD 1 2
S22.X1 0.75 mm² 102 WH 12 X4 102 WH
233 RD S22.X1 6 6 X.4 12
5 5 2.50 mm² 2.50 mm²
2.50 mm² 4
S22.X1
7 7 8
S22.X1
8
C
=Working light rear right
F2.12:2.2
E4
15.6
=Working light front right
104 933
This document will remain the property of Metso Dynapac AB
#477.2
/7.B2
WH E3 BK
X.8.1:1 E3.X1 1 2 E3.X1 Front right
1 2
941 BK 0.75 mm² 1
31B.X8
31.10
31.14
15.12
30
/6.A6
/6.A6
/6.A1
/6.A1
TKZ/GE TKZ/LW
View Date Description Model D
20070125 Circuit diagram CA250 T1
Wire area 1.5 mm unless otherwise stated E Reg.
Rotating beacom, working light
Scale Sheet / of
5 / 14
Ledningsarea 1.5 mm där annat ej anges Kretsschema Rev. No.
Roterande varningsljus, arbetsbelysning 393809
1 2 3 4 5 6
Rev. Pls. Change No. Date Issued by Checked
Rev.970401 =Head light switch
/5.D1
/5.D1
S16
/5.D6
/5.D6
l
0
15.12
30
=Headlight right
31.10
31.14
ll
2.1 B.1 F2.2B1 E10
F2.2 1 241 RD 2 3
S16.X1 120 WH 2.50 mm² 1 X.11 120 WH 2.50 mm² 56A 56A
X 31 E10.X1 968 BK 2.50 mm² 1 Headlight
3 X11 1 E10.X1
F2.12 2.2 20A B.2 F2.2B2 4.00 mm²
S16.X1 2
1
56B
X 31 31A.X18 Right/ front A
121 969 BK
2.2 1
246 WH
S16.X1 =Headlight left
RD 5 6 6S16.X1 Headlight
S16.X1 5
4 4 623 YE
E9
964 BK 7 S16.X1 122 WH 56A 56A Left/ front
0.75 mm² S16.X1 7 8 8 E9.X1 X 31 E9.X1
624 56B 31
9 S16.X1 X
F2.1:1.2
9 10 YE 3 X.11 669 YE =Position direction right/ front
S16.X1 10
15.6
X11 3 1 1 E15/H18 Position/
1 X.510
/1.B1
X.11
2 3 3S21.X1 1 1 2 H17.X2 973 BK side
4
H17.X1 1 Left
S21.X1 2 1 1 E14/H26/H16
4
X11
662 E14.X1.1 1 Position
664 YE 663 1
6 YE 0.75 mm² YE Left/ rear
245 RD S21.X1 5 4 0.75 mm² 663 YE 2 X12 661 YE
7 S21.X1 X.12 2
7 8 8
=Flash relay S21.X1
967 9 S21.X1 H26.X1.1 2 4 E14.X2.1 Break light
K9 BK 9 10 10
X.516
1 1 1
Left/ rear
0.75 mm²
49A K9.X1660 YE 670 YE X.12 X12 670 YE 978
49a 3 3 BK
31A.X23
Direction
49 49 31 K9.X1 H16.X1.1 3 1
K9.X1 31 =Hazard switch 1 Left/ rear
670
671 X.513
S17 YE 4 X12
1
YE 977
X.12 4 632 YE
l BK
650 E16/H27/H19 1
C
0 650 YE X.514
YE 631 YE E16.X1.1 1 Position
1
Right/ rear
3 150 WH 976
E17.X1
2 BK
1
18 S17.X1
=Registration plate lamp
X.512
S17.X1 18 17 17 H27.X1.1 2 4 E16.X2.1 Break light
communicated to any third part or used for manufacturing purposes.
and may not without the permission of the said company be copied,
1
5 1 1
Right rear
E17
S17.X1 5
This document will remain the property of Metso Dynapac AB
1
10 652 YE
S17.X1 10
1 Direction
2 H19.X1.1 3 31B.X9
1 Right/ rear
E17.X2
1
961 BK 651 YE 1
31B.X10
31.22
31.20
=Break light relay 980 BK
K10
#494.2
730 BU 0.75 mm² 6 X6 730 BU 1 86 85 K10.X1 960 BK
/7.A6
/7.A6
/2.B4
X.6 6 K10.X2 85
15.20
30.1
/7.A1
Trafikbelysning 393809
1 2 3 4 5 6
Rev. Pls. Change No. Date Issued by Checked
Rev.970401
/6.D1
/6.D1
=Working light rear left
/6.D6
/6.D6
E6.1
30.1
15.20
1 2 31.22 31.20
110 WH 2.50 mm² 1 E6.X2 950 BK 2.50 mm² X13.3
E6.X2 2 2
X13.3
1
=Working light rear right
111 A
WH E8.1 951
BK
1 1 2 E8.X2
E8.X2 2
=Working light Front.Left Cab
E20
#477.1 1 X13.4 101 WH 1 X.41 X.519 1 2 X.519
/5.B4
X.13:1 X.13.1 1 X41 1 1 2
=Working light Rear.Right Cab
103
WH
E22
2 X.41 X.520 1 2 X.520
X41 2 1 2
=Working light Front.Right Cab
E21
#477.2 1 X8.4 102 WH 3 X.41 X.521 1 2 X.521
/5.C4
X.8:1 X.8.1 1 X41 3 1 2
B
=Working light Rear.Right Cab
104
WH
E23
4 X.41 X.522 1 2 X.522
X41 4 1 2
H14.1
1
M
#1724.1 1 X7.1 610 YE 1 X.32
/5.A4 2
X.7:1 X.7.1 1 X32 1
C
communicated to any third part or used for manufacturing purposes.
and may not without the permission of the said company be copied,
This document will remain the property of Metso Dynapac AB
31.26
31.23
30.4
15.5
/8.A6
/8.A6
/8.A1
/8.A1
TKZ/GE TKZ/LW
View Date Description Model D
20070125 Circuit diagram CA250 T1
E Reg. Scale Sheet / of
Working light,Rotating beacon cab 7 / 14
Kretsschema Rev. No.
Arbetsbelysning, Rot. varningsljus hytt 393809
1 2 3 4 5 6
Rev. Pls. Change No. Date Issued by Checked
Rev.970401
/7.D1
/7.D1
30.4 15.5
/7.D6
/7.D6
/1.A4
S38 =Heater blower
31.23
31.26
M2
#2687.1
Q1.X6
4
F12 F22.1 2 A
+
87a K30.X1 3
255 RD
6.00 mm²
1
F12.X1
1
50A
2 F12.X1
2
254 RD
6.00 mm²
A
X.60
X60
A
K30.X1
30 30 87 87
X.524
1
1
20A
X.524
2
2
M B
X60
X.60
B
974 BK
6.00 mm²
31C.X1
1
K30
S34 B
8
6
2
7
5
1
M3
0 RD 53 31 BK X59 X.59 975 BK 1
M 2 2
1 2.50 mm² 31B.X16
GN 31B
#1691.1 =Horn. Cab
C
/11.B1
X.59.1:1
H11.1
2
#1730.1 1
/4.A4
S3.X1:3
communicated to any third part or used for manufacturing purposes.
and may not without the permission of the said company be copied,
1 X.29.1 1
#1731.1
/4.A5
31B.X5
30.13
15.19
31.36
31.40
/11.A1
/11.A1
/11.A6
Designed Approved Material Designation Part No
TKZ/GE TKZ/LW
View Date Description Model D
20070125 Circuit diagram CA250 T1
E Reg. Scale Sheet / of
Simple cab 8 / 14
Kretsschema Rev. No.
Enkel hytt 393809
1 2 3 4 5 6
Rev. Pls. Change No. Date Issued by Checked
Rev.970401
30 15 K32 31
X63
CONDENSER UNIT X63
583 6 30 87 997 2.5 997 2.5
A B
B15 A
X63
589 Red/white Blue/White 86 85
1 4 M6
D
590 Black/White
2
P 3
R3
M
=Compressor clutch
K33
Pressure switch R4 M7 C
Blue/Red
Tryckvakt 30 87
M
M8
X63
588 86 85
R5
C M
X62
590 590
A
B
X64 589
A/C UNIT
3
B16
T
/1.B1
X64 588
X.35
#2686.1
2
DEICING
THERMOSTAT
570 K30
GN
1 X.58.1 570 1 X61.1
X58.1 1 GN X.61.1 1 86 85
B 1 AC ON
20A X1 X2
/1.A4
communicated to any third part or used for manufacturing purposes.
and may not without the permission of the said company be copied,
13 14
This document will remain the property of Metso Dynapac AB
X64
998 4,0
S38
C M2 4
H
X64 589 B
571 M
4,0 L
M
1
TZ/GE TKZ/LW
View Date Description Model D
20080409 Circuit diagram CA250 T1
E Reg. Scale Sheet / of
AC 9 / 14
Kretsschema Rev. No.
AC 393809
1 2 3 4 5 6
Rev. Pls. Change No. Date Issued by Checked
Rev.970401
31.42
A
E24
2 X.26 1
S37 X26 2 31B.X12
1
#1631.1 1 X26
0
/6.B1
F1.78:H.2 X.26 1
2
C
communicated to any third part or used for manufacturing purposes.
and may not without the permission of the said company be copied,
This document will remain the property of Metso Dynapac AB
31.43
/11.A6
Designed Approved Material Designation Part No
TKZ/GE TKZ/LW
View Date Description Model D
20070125 Circuit diagram CA250 T1
E Reg. Scale Sheet / of
Simple cab CEmark 10 / 14
Kretsschema Rev. No.
Enkel hytt CEmärkt 393809
1 2 3 4 5 6
Rev. Pls. Change No. Date Issued by Checked
Rev.970401
/8.D1
/8.D1
30.13 15.19
/10.D6
/8.D6
=Wiper rear
M4
31.36
31.43
RD 53 31 BK
S36 M
A
8 GN 31B
6
2 YE 53A
7
5
1
0
1
=Wiper front
M3.1
/8.C2
RD 53 31 BK 2 X59.1
S34.1 M X.59.1 2
X.73.1
#1691.1
8
6
GN 31B
B
2 YE 53A
7
1 X59.1 5
X.59.1 1 1
0
1
=Washer front/rear
M5 M
S35
2 C
4
8
1
3
communicated to any third part or used for manufacturing purposes.
and may not without the permission of the said company be copied,
7
This document will remain the property of Metso Dynapac AB
1
0
2
31.28
31.6
30.4
15.5
/12.A6
/12.A6
/12.A1
/12.A1
TKZ/GE TKZ/LW
View Date Description Model D
20070125 Circuit diagram CA250 T1
E Reg. Scale Sheet / of
Simple cab CEmark 11 / 14
Kretsschema Rev. No.
Enkel hytt CEmärkt 393809
1 2 3 4 5 6
Rev. Pls. Change No. Date Issued by Checked
Rev.970401
/11.D1
/11.D1
/11.D6
/11.D6
30.4
15.5
31.28
31.6
S54 A
l =Rear axel
0
Y5
S54.X1
5.1 5.1 E.1 F1.56 250 RD S54.X1 1 1S54.X1
F1.56 F1.5 E.1 2 2
3
709 BU 1 X.17 709 BU Y5.X1 1 2 Y5.X1 918 BK X.17 X17 918 BK 1
3 X17 1 1 2 2 2
251 31B.X14
5.2 10A E.2 710 BU
RD
S54.X1 4
5 5 S54.X1 711 BU
6 6
712 BU
=Drum drive
Y6
713
BU
X.16 X16 711 BU Y6.X1 1 2 Y6.X1 919 BK X16 X.16 919 BK 1
1 1 1 2 2 2
31B.X15
B
S55
l
0
ll
S55.X1
S55.X12 1 1
2
3
714 BU S55.X1 4
5 5 S55.X1
6 6
C
communicated to any third part or used for manufacturing purposes.
and may not without the permission of the said company be copied,
This document will remain the property of Metso Dynapac AB
31.27
30.4
15.5
31.6
Designed Approved Material Designation Part No
TKZ/GE TKZ/LW
View Date Description Model D
20070125 Circuit diagram CA250 T1
E Reg. Scale Sheet / of
Dual speed 12 / 14
Kretsschema Rev. No.
Hög/ låg hastighet 393809
Rev. Pls. Change No. Date Issued by Checked
Rev.970401
Reference List
Device Name Description Sheet Ref. Device Name Description Sheet Ref.
A1 Warning/Hour/Fuel Instr /3.B2 K1 Start relay 75A /1.B4
A1.X1 42pin /1.B3 K2 Fuel solenoid relay 75A /1.B4
A8.X33 8 Pol MATENLOK /3.B3 K9 Flash relay /6.C1
A8.X34 10 Pol MATENLOK /3.A3 K10 Break light relay 30A /6.D3
B1 Hydraulik oil temp /3.C5 K11 Light relay 30A /5.B2
B2 Engine temp /3.B5 K30 Heater relay 30A /8.A2
B3 Fuel sender /3.B5 K30.1 Heater relay 30A /9.B2
B4 Air filter /3.C5 M1 Starter /1.A6
B10 Engine pressure /3.B5 M2 Heater blower /8.A4
E1 Working light Rops /5.C4 M3 Wiper front /8.C5
E2 Working light Rops /5.C4 M3.1 Wiper front /10.B5
E3 Working light Rops /5.D4 M4 Wiper rear /10.A5
E4 Working light Rops /5.C4 M5 Washer /10.C5
E5 Working light /5.B3 Q1 Circuit breaker /1.A5
E6 Working light /5.B4 R1 Potentiometer with movable contact /1.C2
E6.1 Working light /7.A4 R2 Resistor 1,5 Kohm /3.C3
E7 Working light /5.B3 R1.X1 3 Pol Plug /1.C2
E8 Working light /5.B4 S1 Switch ignition /1.A1
E8.1 Working light /7.A4 S2 Emergency switch Caldaro /1.B2
E9 Headlight /6.A5 S3 Sw Signal Horn /4.A3
E10 Headlight /6.A5 S4.1 Neutral position switch pump /2.B2
E17 Registration plate lamp /6.C4 S5 Seat switch /2.B3
E20 Working light Cab /7.B4 S6 Vibb on/off /4.C3
E21 Working light Cab /7.B4 S12 Sw Vibration 3way LH /4.C2
E22 Working light Cab /7.B4 S14 Sw Parking brake /1.C4
E23 Working light Cab /7.B4 S16 Sw Traffic Light /6.A2
E24 Inner light /9.C4 S17 Sw_Hazard /6.C3
E13/H15 Directio indicator lamp. Front/Left /6.B5 S18 Sw Rotating Beacon /5.A2
E15/H18 Directio indicator lamp. Front/Left /6.A5 S21 Sw Direction Indicate /6.B3
E16/H27/H19 DirectionPos and stop rear right /6.C5 S22 Sw Working Light /5.C2
E14/H26/H16 DirectionPos and stop rear left /6.C5 S34 Sw Window wiper /8.B3
F1.1 Fuse 15A. Blue /1.B1 S34.1 Sw Window wiper /10.B4
F1.2 Fuse 10 A. Red /4.A1 S35 Sw Window washer /10.C4
F1.4 Fuse 10A. Red /5.A1 S36 Sw Window wiper rear /10.A4
F1.5 Fuse 10A. Red /11.A1 S37 Door switch /9.C2
F1.6 Fuse 10A. Red /8.C2 S38 Sw Fan /8.A4
F1.8 Fuse 10A. Red /6.B1 S54 Sw Tractin controll /11.A3
F2.1 Fuse 20A. Yellow /5.C1 S55 Sw Dual speed /11.B4
F2.2 Fuse 20A. Yellow /6.A1 V1 Diod /1.B5
F10 Fuse 40A. Orange /1.A4 X4 12 Pol Receptacle /3.B3
F11 Fuse 40A. Orange /1.A4 X.4 12 Pol Plug /3.B3
F20 Fuse 125A. Orange /1.A4 X6 12 Pol Receptacle /3.A3
F21 Fuse 125A. Orange /1.A4 X.6 12 Pol Plug /3.A3
F22 Fuse 20A. Yellow /8.A1 X7 2 Pol Receptacle /5.A4
F22.1 Fuse 20A. Yellow /9.B1 X.7 2 Pol Plug /5.A4
G1 Battery /1.A5 X7.1 2 Pol Receptacle /7.C2
G2 Alternator /1.C6 X.7.1 2 Pol Plug /7.C2
G2.X1 4pol F 150series /1.B6 X.8 2 Pol Plug /5.C4
H10 Buzzer /2.A3 X8.1 2 Pol Receptacle /5.B3
H11 Horn /4.A5 X.8.1 2 Pol Plug /7.B2
H11.1 Horn. Cab /8.C5 X8.2 2 Pol Receptacle /5.C4
H13 Backup alarm /4.B5 X8.4 2 Pol Receptacle /7.B2
H14 Rotating Beacon /5.A4 X9 2 Pol MTA /1.A3
H14.1 Rotating beacon Cab /7.B5 X.9 2 Pol MTA /1.A3
H17 Side direction indicator lamp /6.B5 X11 6 Pol Receptacle /6.A3
H20 Side direction indicator lamp /6.B5 X.11 6 Pol Plug /6.A3
Designed Approved Material Designation Part No
TKZ/GE TKZ/LW
View Date Description Model
Reference List 13 / 14
Kretsschema Rev. No.
Apparatlista 393809
This drawing will remain the property of Metso Dynapac AB and may not without the permission
of the said company be copied, communicated to any third part or used for manufacturing purposes.
Rev. Pls. Change No. Date Issued by Checked
Rev.970401
Reference List
Device Name Description Sheet Ref. Device Name Description Sheet Ref.
X12 6 Pol Receptacle /6.B3
X.12 6 Pol Plug /6.B3
X.13 2 Pol Plug /5.C4
X13.1 2 Pol Receptacle /5.B3
X.13.1 2 Pol Plug /7.B2
X13.2 2 Pol Receptacle /5.C4
X13.3 2 Pol Receptacle /7.A5
X13.4 2 Pol Receptacle /7.B2
X16 2 Pol Receptacle /11.B5
X.16 2 Pol Plug /11.B5
X17 2 Pol Receptacle /11.A5
X.17 2 Pol Plug /11.A5
X26 2 Pol Plug SureSeal /9.C2
X.26 2 Pol Receptacle SureSeal /9.C1
X.29 3 Pol Plug /1.A2
X29.1 2 Pol Receptacle SureSeal /8.C4
X.29.1 2 Pol Plug SureSeal /8.C4
X32 2 Pol Plug SureSeal /7.C3
X.32 2 Pol Receptacle SureSeal /7.C3
X40 2 Pol MTA /1.A3
X.40 2 Pol MTA /1.A3
X41 5 Pol Receptacle SureSeal /7.B3
X.41 5 Pol Plug Sure Seal /7.B3
X58 2 Pol Plug SureSeal /8.A2
X.58 2 Pol Receptacle SureSeal /8.A2
X58.1 2 Pol Plug SureSeal /9.B1
X.58.1 2 Pol Receptacle SureSeal /9.B2
X59 2 Pol Receptacle SureSeal /8.C3
X.59 2 Pol Plug SureSeal /8.C3
X.59.1 2 Pol Plug SureSeal /10.B3
X60 2 Pol MTA /8.A6
X.60 2 Pol MTA /8.A6
X61 2 Pol Plug SureSeal /8.A2
X.61 2 Pol Receptacle SureSeal /8.A2
X61.1 2 Pol Plug SureSeal /9.B2
X.61.1 2 Pol Receptacle SureSeal /9.B2
X62 2Pol F /9.B2
X70 Sealed splice /8.C2
X71 Sealed splice /8.D2
X.75 1 Pol superseal /9.B5
Y1 Fuel solenoid valve /1.C5
Y2 Break valve /1.C6
Y3 Vibration valve Low /4.C5
Y4 Vibration valve High /4.C5
Y5 Rear axel valve /11.A5
Y6 Drum drive valve /11.B5
TKZ/GE TKZ/LW
View Date Description Model
Reference List 14 / 14
Kretsschema Rev. No.
Apparatlista 393809
This drawing will remain the property of Metso Dynapac AB and may not without the permission
of the said company be copied, communicated to any third part or used for manufacturing purposes.
1 2 3 4 5 6
Rev. Pls. Change No. Date Issued by Checked
Rev.970401
F11 2
30.3 15.2
/6.B1
K11.X1:30
15.18
205 RD
6.00 mm²
A
X40
X.40
A
205 RD 1
6.00 mm² F11.X1
1
40A
F11.X1
2
A 1 08662 081222 TKZ/GE TKZ/LW
243 BK
16.00 mm² =Batteriswitch
202 RD B X.9 202,202 RD,RD
=Main fuse 901
X9 B Q1
31.6
31.3
6.00 mm² BK
219 RD 4.00 mm² A7 6.00 mm²,6.00 mm²
F10.X1 1
F10 2 F10.X1 201,201RD,RD Q1.X1 1 1.1
6.00 mm² A X.9 901,901 BK,BK 1 1
X.29 604,604 YE,YE 27 =Gridheater 1 40A 2 6.00 mm²,6.00 mm² Q1.X2 1.2 X9 A 31A.X1
c1.p27 6.00 mm²,6.00 mm²
B 0.75 mm²,0.75 mm² A1.X1 ECU F20.X1 1
F20 2 F20.X1 266 BK 16.00 mm² Q1.X3 1 1.3 G1 =Batteri
31B.X1
A
S1 X.29 605,605 YE,YE 28
c1.p28 1 125A 2
Q1.X4
1
1.4 2 X.38 298 BK
X.37+ X.36 999 BK 1
A 0.75 mm²,0.75 mm² A1.X1 1 1 70.00 mm² 1 1 70.00 mm² 31A.X2
P =Gridheater 208,208RD,RD 4.00 mm²,4.00 mm² Q1.X5 1.5
0 267 1
l X.29 920,920BK,BK 30
c1.p30 F21.X1 1
F21 2 F21.X1 BK
255 RD 6.00 mm² Q1.X6
1
1.6
ll C 0.75 mm²,0.75 mm² A1.X1 Q1.X7 1.7
lll 1 125A 2 16.00 mm²
1 299 BK 70.00 mm²
58
1 30a 19b
S1.X11 19a 267 BK #1510.1 #1669.1
30b 17a /3.B5 /9.A1
16.00 mm² K5.2.X2 F22.X1:1
X.89 17b
244
266 BK
902,902 VT,VT X4:2
/2.B4
M1
RD 15 S1.X2 311,311VT,VT 15 #1509.1 M1.X1
c1.p15 /3.A5 0.75 mm²,0.75 mm² #297.2 30
4.00 mm² 5 230 RD 15.17 0.75 mm²,0.75 mm²A1.X1 16.00 mm² K5.1.X2 1
54 =Start
F1.78:8.1
/6.B1 1
K11.X1:86 50
K1 M1.X3
15.7
1
50 30 30 E
A1.X1 301,301 VT,VT 0.75 mm²,0.75 mm² 1 85 K1.X1 M1.X3.1
50a S1.X2 311 VT 2 X.6 c1.p12 12 K1.X1 2 CA260
M1.X2.1
1
1
/7.B1
M1.X2
7 X6 2
0.75 mm²
=Emergency switch
1.1 1.1 A.1 F1.12 220 RD 1 30 87 K1.X4 209 RD 207
F1.12 F1.1 A.1 2.50 mm²
S2 A F23 2 286,286
K1.X3 86 1 4.00 mm² 207
BK
BK
X.72 1 X.72
1.2 1.2 15A A.2 X.35 1 2
RD,RD 209 RD 4.00 mm²
10.00 mm²
10.00 mm² B
30A 6.00 mm²,6.00 mm²
F1.12 1 =ECU engine
570,570 GN,GN S2.X1 S2.X2
1 1
X58:1, X58.1:1
342 12 11
RD 1
S2.X4 A1.X1 314,314 VT,VT
c1.p32
#2098.4
32
F1.12:2.1 2.50 mm²
22 21 0.75 mm²,0.75 mm²
213 V1 BN,BN
1 S2.X3 285,285 RD,RD #1540.2 #2066.2 801,801 BN,BN A K 801,801
A G2.X1
RD /3.C3 /4.A4
1G2.X2
G2.X1
S2.X5 1 2.50 mm²,2.50 mm² X48:4 X.503
0.75 mm²,0.75 mm² 0.75 mm²,0.75 mm²
=Parking brake
/9.A1
/10.B1
2.50 mm²
B
221 RD 2.50 mm² 284,284 RD,RD #1540.1
G2 =Alternator
15.23
/3.C3
X48:3
2.50 mm²,2.50 mm² S14 D+ B+ W
A1.X1 283,283 RD,RD #1444.14 l
c1.p14 /3.A3
/5.A1
14 0.75 mm²,0.75 mm² A12.X1:39 E
0
1
3 X.6 213,213 RD,RD 1
G2.X4
X6 3 2.50 mm²,2.50 mm²A1.X1
c1.p01
222 RD 3 BK,BK
/2.A1 A1.X1 303,303 VT,VT 5 X.4 303 VT S.14.X1 3
X.4:10 c1.p13 S.14.X1 306 VT 6 X4 906,906 31A.X24
2.50 mm² 13 0.75 mm²,0.75 mm² X4 5 2 2
0.75 mm² 1 1 X.4 6 1
2.50 mm²,2.50 mm²
X.507 1
401,401 4
A1.X1
c1.p04 236 RD S.14.X1 6
0.75 mm²,0.75 mm² S.14.X1 317 VT 7 X.6
0.75 mm² 5 5
702,702BU,BU 3
4 4 0.75 mm² X6 7
306,306
C
c1.p03 7 8
0.75 mm²,0.75 mm² A1.X1 VT,VT
=Driving
A1.X1 317,317 VT,VT
Y2 =Break
R1 1.50 mm²,1.50 mm²
R1.X1 c1.p9 9 0.75 mm²,0.75 mm²
B
A R1.X1 908,908 BK,BK 5 1 1 2 Y.2.X1 905,905 31A.X4
communicated to any third part or used for manufacturing purposes.
c1.p05
and may not without the permission of the said company be copied,
RD c1.p2
A1.X1
2
1.50 mm²
903,903 BK,BK 1
S12.X1:2
31.34
31.35
31A.X5
30.10
15.13
/2.A6
/2.A6
/2.A1
/2.A1
/5.C1
TKZ/GE TKZ/LW
View Date Description Model D
20060615 Circuit diagram CA250 T3
Wire area 1.5 mm unless otherwise stated E Reg.
Start and stop
Scale Sheet / of
1 / 14
Ledningsarea 1.5 mm där annat ej anges Kretsschema Rev. No.
Start och stopp A 392423
1 2 3 4 5 6
Rev. Pls. Change No. Date Issued by Checked
Rev.970401
/1.D1
/1.D1
/1.D6
/1.D6
A7
30.10
15.13
ECU
31.34
31.35
601 YE 1 X4 601,601 YE,YE 17
c1.p17
0.75 mm² X.4 1 0.75 mm²,0.75 mm² A1.X1 A
=Buzzer
H10
H10.X
31.29 223 RD H10.X+1
/5.B2
X.508:1 1
3 222 RD
/1.C1 =Seat switch
X.507:1
X.502
2.50 mm² S5
NC A S5.X1
X.4
A
10
1 217,217 RD,RD C C C
B A1.X1
c1.p16
0.75 mm²,0.75 mm²
215,215
RD,RD A1.X1 307,307 VT,VT #765.3
c1.p29 29 X4:3
/4.B3
=Pump switch 0.75 mm²,0.75 mm²
2.50 mm²,2.50 mm²
A1.X1 730,730 BU,BU #494.2
S4.1 c1.p34 34
/7.D1
0.75 mm²,0.75 mm²
218,218 S4.1.X1 1 2 S4.1.X1 315,315 VT,VT 21
RD,RD A B A1.X1
c1.p21 B
=RPM
S45
LOW
MID
HI
C
communicated to any third part or used for manufacturing purposes.
and may not without the permission of the said company be copied,
This document will remain the property of Metso Dynapac AB
992 BK 1.50 mm² 1
31B.X2
31.19
31.7
/3.A6
/3.A6
15.11
30.9
TKZ/GE TKZ/LW
/3.A1
/3.A1
Start and stop 2 / 14
Kretsschema Rev. No.
Start och stopp A 392423
1 2 3 4 5 6
Rev. Pls. Change No. Date Issued by Checked
Rev.970401
/2.D1
/2.D1
/5.A1
/2.D6
/2.D6
15.11
30.9
F1.12:2.1
15.21
K31
31.7
31.19
322,322VT,VT 1 86 85 K5.1.X1 981,981BK,BK 1 A
0.75 mm²,0.75 mm² K5.1.X1 2 0.75 mm²,0.75 mm² 31A.X6
343
RD
2.50 mm²
A12 #1509.1 266 BK 1 30 87 K5.1.X3 264 BK
/1.B4
16.00 mm² K5.1.X2 1 16.00 mm²
3.1 3.1
F1.3
C.1
/1.C4
#1444.14 283,283 RD,RD 39 ECU
F1.34 A1.X1:14 0.75 mm²,0.75 mm² A12.X1
=Diag. Ins/Dec 0.75 mm²,0.75 mm²
S53
X.506 1
15.22
=Stop
290
RD
0.75 mm²
H35 323,323 VT,VT 1 K5.2.X1
VT,VT
/6.A1
E26.X1
E26.X2
0.75 mm² S53.X1 1 X.5 4 0.75 mm²,0.75 mm² A12.X1
23
1
1 24 S53.X4 836 BN 0.75 mm² 5 X5 836,836 BN,BN 24 A12.X1 324,324 VT,VT 7 X.5 324 VT S.45.X1:3
/2.C3
S53.X3 1 X.5 5 0.75 mm²,0.75 mm² A12.X1 4 0.75 mm²,0.75 mm² X5 7 #297.1 =Gridheater 2 1
0.75 mm²
6 X5 837,837 BN,BN 2
=Diagnostic
X.5 6 0.75 mm²,0.75 mm² A12.X1 A12.X1 325,325 VT,VT 8 X.5 325 VT S.45.X1:6
E26
S52 16 X5 8 #1511.2
/2.C3
0.75 mm²,0.75 mm² 0.75 mm²
990
0 837 BN
1
4
X48
3
X48
2
X48
X48
BK
0.75 mm²
0.75 mm² 1
13 14
1 S52.X2
S52.X1 1
C
communicated to any third part or used for manufacturing purposes.
and may not without the permission of the said company be copied,
This document will remain the property of Metso Dynapac AB
989 BK 0.75 mm² 1
31B.X3
31.15
31.18
30.6
15.8
/4.A6
/4.A6
/4.A1
/4.A1
TKZ/GE TKZ/LW
View Date Description Model D
20060615 Circuit diagram CA250 T3
E Reg. Scale Sheet / of
ECUengine A 3 / 14
Kretsschema Rev. No.
ECUmaskin A 392423
1 2 3 4 5 6
Rev. Pls. Change No. Date Issued by Checked
Rev.970401
/3.D1
/3.D1
/3.D6
/3.D6
30.6
15.8
801,801BN,BN #2066.2
A1
31.15
31.18
/1.B5
V1:A
0.75 mm²,0.75 mm²
ECU
802,802 BN,BN 24
A1.X1
c1.p24
0.75 mm²,0.75 mm² A
4 X.6 802,802 BN,BN 25
X6 4 A1.X1
c1.p25
0.75 mm²,0.75 mm²
1 X.509
26
X.503 1
A1.X1
c1.p26 c1.p35
A1 802 BN
806,806
229 RD 0.75 mm² 808,808 BN,BN
0.75 mm² Hour Meter BN,BN 0.75 mm²,0.75 mm²
31.31 228 RD 7 V + Enable A8.X34 0.75 mm²,0.75 mm²
/5.B2
X.508:1 A8.X33 J1:7
H J2:9 9 Fuel sender
231 Fuel lev.
B3
RD 2
Keyswitch A8.X33 803 BN 0.75 mm² 8 X4 803,803 BN,BN B3.X1 1 2 B3.X2 913,913 BK,BK 1
0.75 mm² A8.X34 J2:2
B J1:8 8 X.4 8 0.75 mm²,0.75 mm² 1 Fuel 1 0.75 mm²,0.75 mm² 31A.X9
Low fuel
Engine temp
B2
Charging
X.504 1
J1:1 1
B10
Eng. press. P
A8.X34 807 BN 0.75 mm² 9 X4 807,807 BN,BN 807,807 BN,BN 1 1 2
8 X.4 9 B10.X1
Eng.Temp
J2:8 0.75 mm²,0.75 mm² 0.75 mm²,0.75 mm²
X.505 1
Brake
A8.X34 307 VT 3 X4 307,307 VT,VT Hydraulik oil temp
/2.B5
J2:3 3 0.75 mm² X.4 3 #765.3
1 R2 2
0.75 mm²,0.75 mm² B1
Hydraulic
A8.X34 =1.5 Kohm 809 BN 0.75 mm² X6 X.6 809,809 BN,BN B1.X1 1 2 Eng.Pressure
J2:4 4 10 10 0.75 mm²,0.75 mm² 1
Air filter Air filter
A8.X34 810 BN 0.75 mm² 11 X.6 810,810 BN,BN
J2:5 5 X6 11 0.75 mm²,0.75 mm²
B4
915 P
B4.X1 1 2 B4.X2 915,915 BK,BK 31A.X10
BK
1 1 0.75 mm²,0.75 mm² 1
Glowing
V A8.X33
0.75 mm²
931 BK 0.75 mm² 1 C
J1:5 5 31B.X4
A8.X34 308 VT
/3.A5
J2:10 10 #481.1
0.75 mm²
communicated to any third part or used for manufacturing purposes.
and may not without the permission of the said company be copied,
This document will remain the property of Metso Dynapac AB
31.12
31.1
15.1
30.2
/5.A6
/5.A6
/5.A1
/5.A1
TKZ/GE TKZ/LW
View Date Description Model D
20060615 Circuit diagram CA250 T3
Wire area 1.5 mm unless otherwise stated E Reg.
Warning panel
Scale Sheet / of
4 / 14
Ledningsarea 1.5 mm där annat ej anges Kretsschema Rev. No.
5 6 Varningspanel A 392423
1 2 3 4 5 6
Rev. Pls. Change No. Date Issued by Checked
Rev.970401
/4.D1
/4.D1
/1.B1
/4.D6
/4.D6
=Horn switch
15.1
30.2
F1.12:1.2
15.23
S3
31.1
31.12
l =Horn
342 RD
2.50 mm²
0
604 YE H11.X2
H11
2
1 Horn
S3.X1
A
2.1 2.1 B.1 F1.12 226 RD S3.X1 3 3 1
F1.12 F1.2 B.1 2 2
1
H11.X1
1
2.2 10A B.2 F1.12 227 RD #1730.1
343 RD /9.C1
B.2 X70:1
6
2.50 mm² 5
4 932 BK 1
31B.X5
X.508 1 7 8
F1.34:3.1
X71:1
15.21
H10.X+:1
X.509:1
31.31
31.29
/3.A1
=Backup alarm
/4.A1
/2.A2
A7 A1.X1 603,603 YE,YE 1 1
H13
1
c1.p18 18 H13.X1 X246
0.75 mm²,0.75 mm²
ECU 2 Backup
X246
2
alarm
B
H13.X1
2
705 BU 0.75 mm² 9 X.6 705,705 BU,BU 8 909,909 BK,BK 1
=Vibration X6 9 A1.X1 31A.X11
0.75 mm²,0.75 mm² 0.75 mm²,0.75 mm²
S12.X1 707 BU X6 X.6 707,707 BU,BU 7 A1.X1 701,701 BU,BU 1 1 2 Y3.X1 911,911BK,BK 1
4 225 RD S12.X1 2
1.50 mm² 3 3 8 8 A1.X1
c1.p08 c1.p10 10 Y3.X1 2 31A.X12
/1.D1 0.75 mm² 0.75 mm²,0.75 mm² 0.75 mm²,0.75 mm² 0.75 mm²,0.75 mm²
X.507:1 2
1 706
238 RD BU =Vibration valve High
0.75 mm² 5 6 S12.X1 0.75 mm²
703,703 BU,BU 6 A1.X1
Y4
S12.X1 5 c1.p06
4 4 S12.X1 0.75 mm²,0.75 mm² A1.X1 11
943 BK 7
0.75 mm²S12.X1 7 8 8 708 BU 708,708 BU,BU 1 1 2 Y4.X1 914,914 BK,BK 1
9 S12.X1 0.75 mm² Y4.X1 2 31A.X13
Vibration
S12.X1 9 10 10 0.75 mm²,0.75 mm² 0.75 mm²,0.75 mm²
C
=Vibration on/off
S6
communicated to any third part or used for manufacturing purposes.
and may not without the permission of the said company be copied,
This document will remain the property of Metso Dynapac AB
942 BK 0.75 mm² 1
31B.X6
30.5
31.2
31.5
15.4
/6.A1
/6.A1
/6.A6
/6.A6
Designed Approved Material Designation Part No
TKZ/GE TKZ/LW
View Date Description Model D
20060615 Circuit diagram CA250 T3
Wire area 1.5 mm unless otherwise stated E Reg.
Horn vibb and backup alarm
Scale Sheet / of
5 / 14
Ledningsarea 1.5 mm där annat ej anges Kretsschema Rev. No.
Signalhorn,vibb och backalarm A 392423
1 2 3 4 5 6
Rev. Pls. Change No. Date Issued by Checked
Rev.970401
=Rotating beacon switch
S18
/5.D1
/5.D1
F1.34:3.1 #1724.1
/3.B1 l /8.C2
/5.D6
/5.D6
15.22 X.7.1:1 =Rotating beacon
344 RD 0
30.5
15.4
2.50 mm² H14
31.5
31.2
S18.X1 610 YE 4 X4 610,610 1 X7 610 YE 1 1
4.1 4.1
F1.4
D.1 F1.34 224 RD S18.X1 3 3 X.4 4 YE,YE X.7 1 H14.X1 M
F1.34 D.1 2 2
1
Rotating
A
4.2 10A D.2 2
1
beacon
H14.X2
611
6 YE
5
4 927 BK 2 X.7 927,927 1
345 S18.X1 S18.X1 0.75 mm² X7 2 BK,BK 31A.X15
RD 7 7 8 8 X.7.1:2
/8.C2
929 BK 0.75 mm² 31.41 1
2.50 mm²
F1.56:5.1
31B.X7
1
15.24
31B.X11
=Working light front left
E5
/12.A1
X13.1
X8.1
#477.1
/8.B2 =Working light rear left
1
=Working light switch X.13.1:1
E2 Rops
S22 1 X13.2 101 WH E2.X1 1 2 E2.X1 930 BK 2 X.13 930,930 BK,BK 1
l
X.13 1 1 2 X13.2 2 31A.X16 Rear left
1.1 1.1 A.1 F2.12 232 RD 2.50 mm² 2.50 mm² 2.50 mm²,2.50 mm²
F2.12 F2.1 A.1
4.00 mm²
0
=Working light front left
1.2 20A A.2 103 931
S22.X1 101 WH 11 X4 101,101 WH,WH
S22.X1 3 3 X.4 11 2.50 mm²,2.50 mm²
WH E1 BK
2 2 2.50 mm²
E1.X1 1 2 E1.X1 Front left
1 234
RD 1 2
S22.X1 0.75 mm² 102 WH 12 X4 102,102 WH,WH
233 RD S22.X1 6 6 X.4 12 2.50 mm²,2.50 mm²
5 5 2.50 mm²
2.50 mm² 4
S22.X1
7 7 8
S22.X1
8
C
=Working light rear right
F2.12:2.2
E4
15.6
/7.A1
=Working light front right
This document will remain the property of Metso Dynapac AB
104 933
#477.2
/8.B2
WH E3 BK
X.8.1:1 E3.X1 1 2 E3.X1 Front right
1 2
941 BK 0.75 mm² 1
31.10
31.14
31B.X8
15.12
30
/7.A6
/7.A6
/7.A1
/7.A1
TKZ/GE TKZ/LW
View Date Description Model D
20060615 Circuit diagram CA250 T3
Wire area 1.5 mm unless otherwise stated E Reg.
Rotating beacom, working light
Scale Sheet / of
6 / 14
Ledningsarea 1.5 mm där annat ej anges Kretsschema Rev. No.
Roterande varningsljus, arbetsbelysning A 392423
1 2 3 4 5 6
Rev. Pls. Change No. Date Issued by Checked
Rev.970401
=Head light switch
/6.D1
/6.D1
S16
/6.D6
/6.D6
l
0
30
15.12
=Headlight right
31.10
31.14
ll
2.1 B.1 F2.2B1 E10
F2.2 1 241 RD 2 3
S16.X1 120 WH 2.50 mm² 1 X.11 120 WH 2.50 mm² 56A
X 31 E10.X1 968 BK 2.50 mm² 1 Headlight
3 X11 1
F2.12 2.2 20A B.2 F2.2B2 4.00 mm²
S16.X1 2
1
56B 56B
X 31 31A.X18 Right/ front A
121 E10.X1 969 BK
2.2 1
246 WH
S16.X1 =Headlight left
RD 5 6 6S16.X1
S16.X1 5 E9 Headlight
4 4 623 YE 122 Left/ front
964 BK 7 S16.X1 56A
WH X 31 E9.X1
0.75 mm² S16.X1 7 8 8
56B 56B
624 X 31
9 S16.X1
F2.1:1.2
YE 3 X.11 669 YE E9.X1
S16.X1 9 10 10
15.6
X11 3 1 1 E15/H18 =Position direction right/ front Position/
1 X.510
/1.B1
X.11
S21.X1 Direction/
2 3 3S21.X1 1 1 2 H17.X2 973 BK 1.50 mm² side
4
H17.X1 1 Left
S21.X1 2 1 1
E14/H26/H16
X11
4
662 E14.X1.1 1 Position
664 YE 663 1
6 YE 0.75 mm² YE Left/ rear
245 RD 1.50 mm² S21.X1 5 4 0.75 mm² 663 YE 2 X12 661 YE
7 S21.X1 1.50 mm² X.12 2
7 8 8
=Flash relay S21.X1
967 9 S21.X1 H26.X1.1 2 4 E14.X2.1 Break light
K9 BK 9 10 10
X.516
1 1.50 mm² 1 1
Left/ rear
0.75 mm²
49A K9.X1 660 670 YE X.12 X12 670 YE 978
49a YE 3 3 BK
31A.X23
49 49 31 K9.X1 H16.X1.1 3 1
Direction
K9.X1 31 =Hazard 1.50 mm² 1 Left/ rear
670
671 X.513
S17 YE
1
4 X12 977
YE 632 YE
l X.12 4 BK
1.50 mm² 650 E16/H27/H19 1
C
0 650 YE 1.50 mm² X.514
YE 631 YE E16.X1.1 1 Position
1
Right/ rear
3 976
1 E17.X1
150 WH
2 BK
1
18 S17.X1
1
=Registration plate lamp
communicated to any third part or used for manufacturing purposes.
X.512
and may not without the permission of the said company be copied,
E17
S17.X1 5
1
10 652 YE
S17.X1 10 1 Direction
1 2 H19.X1.1 3 31B.X9
E17.X2 1 Right/ rear
961 BK 651 YE 1
31.22
31.20
=Break light relay 980 BK 31B.X10
K10
#494.2
730,730 BU,BU 6 X6 730 BU 1 86 85 K10.X1 960 BK
/8.A6
/8.A6
/2.B5
0.75 mm²,0.75 mm² X.6 6 K10.X2 85
15.20
30.1
Designed Approved
30 30 87 Material Designation Part No
/8.A1
Trafikbelysning A 392423
1 2 3 4 5 6
Rev. Pls. Change No. Date Issued by Checked
Rev.970401
/7.D1
/7.D1
=Working light rear left
/7.D6
/7.D6
E6.1
30.1
15.20
31.22 31.20
110 WH 2.50 mm² 1 1 2 E6.X2 950 BK 2.50 mm² X13.3
E6.X2 2 2
X13.3
1
=Working light rear right
111 A
WH E8.1 951
BK
1 1 2 E8.X2
E8.X2 2
=Working light Front.Left Cab
E20
#477.1 1 X13.4 101 WH 101 WH 1 X.41 X.519 1 2 X.519
/6.B4
X.13:1 X.13.1 1 X41 1 1 2
=Working light Rear.Right Cab
X.523 1 E22
103 WH 2 X.41 X.520 1 2 X.520
X41 2 1 2
=Working light Front.Right Cab
E21
#477.2 1 X8.4 102 WH 102 WH 3 X.41 X.521 1 2 X.521
/6.C4
X.8:1 X.8.1 1 X41 3 1 2
B
=Working light Rear.Right Cab
X.524 1 E23
104 WH 4 X.41 X.522 1 2 X.522
X41 4 1 2
H14.1
1
M
#1724.1 1 X7.1 610 YE 1 X.32
/6.A4 2
X.7:1 X.7.1 1 X32 1
C
communicated to any third part or used for manufacturing purposes.
and may not without the permission of the said company be copied,
This document will remain the property of Metso Dynapac AB
31.26
31.23
30.4
15.5
/9.A1
/9.A1
/9.A6
/9.A6
Designed Approved Material Designation Part No
TKZ/GE TKZ/LW
View Date Description Model D
20060615 Circuit diagram CA250 T3
E Reg. Scale Sheet / of
Working light,Rotating beacon cab 8 / 14
Kretsschema Rev. No.
Arbetsbelysning, Rot. varningsljus hytt A 392423
1 2 3 4 5 6
Rev. Pls. Change No. Date Issued by Checked
Rev.970401
/8.D1
/8.D1
30.4 15.5
/8.D6
/8.D6
/1.A4
S38 =Heater blower
31.23
31.26
M2
#1669.1
Q1.X6
4
A
+
F22 2 85 K30.X1 3
255 RD
6.00 mm²
1 1
F22.X1 20A
F22.X1
2
254 RD
6.00 mm²
A
X.60
X60
A
K30.X1
30 86 30 87
87a 2
M B
X60
X.60
B
974 BK
6.00 mm²
31C.X1
1
K30
S34 B
8
6
2
/12.B1
7
F1.56:5.1
15.26
5
1
M3
0 RD 53 31 BK X59 X.59 975 BK 1
M 2 2
346 1 2.50 mm² 31B.X16
RD GN 31B
2.50 mm²
6.1 6.1 F.1 X.73 279 RD X.59 X59 YE 53A
F1.56 F1.6 1 X.73.1 2.50 mm² 1 1
#1730.1 1
communicated to any third part or used for manufacturing purposes.
and may not without the permission of the said company be copied,
/5.A4
S3.X1:3
This document will remain the property of Metso Dynapac AB
#1731.1
/5.A5
30.13
31.36
31.40
15.19
31B.X5:1
/11.A1
/11.A1
/11.A6
/11.A6
Designed Approved Material Designation Part No
TKZ/GE TKZ/LW
View Date Description Model D
20060615 Circuit diagram CA250 T3
E Reg. Scale Sheet / of
Simple cab 9 / 14
Kretsschema Rev. No.
Enkel hytt A 392423
1 2 3 4 5 6
Rev. Pls. Change No. Date Issued by Checked
Rev.970401
S38 =Heater blower
#2086.1
M2
4
+
F22.12 85 K30.X2 3
1 1
F22.X2 20A
F22.X2
2
254 RD
6.00 mm²
A
X.60.1
X60.1
A
K30.X2
30 86 30 87
87a 2
M B
X60.1
X.60.1
B
B
#2098.4 570 GN 1 X.58.1 570 GN 1 X61.1 86 K30.X2
/1.B1
X.35 X58.1 1 X.61.1 1 K30.X2 87 85
K30.1 =Compressor clutch
1 590 GN 1
X62 X.75 C
=Inner light
=Door switch
E24
S37
2 X.26 1
X26 2 31B.X12
181 181
TKZ/GE TKZ/LW
View Date Description Model D
20060615 Circuit diagram CA250 T3
E Reg. Scale Sheet / of
Simple cab CEmark 10 / 14
Kretsschema Rev. No.
Enkel hytt CEmärkt A 392423
1 2 3 4 5 6
Rev. Pls. Change No. Date Issued by Checked
Rev.970401
/9.D1
/9.D1
30.13 15.19
/9.D6
/9.D6
=Wiper rear
M4
31.36
31.40
RD 53 31 BK
S36 M
A
8 GN 31B
6
2 YE 53A
7
5
1
0
1
=Wiper front
M3.1
RD 53 31 BK 2 X59.1
S34.1 M X.59.1 2
8
6
GN 31B
B
2 YE 53A
7
X.73.1 279 RD 1 X59.1 5
/9.C3
#1720.1 2.50 mm² X.59.1 1 1
0
1
=Washer front/rear
M5 M
S35
2 C
4
8
1
communicated to any third part or used for manufacturing purposes.
and may not without the permission of the said company be copied,
3
This document will remain the property of Metso Dynapac AB
1
0
2
31.28
31.6
30.4
15.5
/12.A6
/12.A6
/12.A1
/12.A1
TKZ/GE TKZ/LW
View Date Description Model D
20060615 Circuit diagram CA250 T3
E Reg. Scale Sheet / of
Simple cab CEmark 11 / 14
Kretsschema Rev. No.
Enkel hytt CEmärkt A 392423
1 2 3 4 5 6
Rev. Pls. Change No. Date Issued by Checked
Rev.970401
/11.D1
/11.D1
/11.D6
/11.D6
30.4
15.5
/6.A1
31.6
31.28
F1.34:4.1
15.24
=Traction control
S54 A
345 l =Rear axel
RD 0
Y5
2.50 mm²
S54.X1
5.1 5.1 E.1 X.74 250 RD S54.X1 1 1
F1.56 F1.5 1 2 2 S54.X1
3 3
709 BU 1 X.17 709 BU Y5.X1 1 2 Y5.X1 918 BK X.17 X17 918 BK 1
X17 1 1 2 2 2
251 31B.X14
5.2 10A E.2 710 BU
RD
S54.X1 4
346 5 5 S54.X1 711 BU
RD 6 6
712 BU
2.50 mm²
=Drum drive
F1.56:6.1
Y6
15.26
713
BU
X.16 X16 711 BU Y6.X1 1 2 Y6.X1 919 BK X16 X.16 919 BK 1
/9.B1
1 1 1 2 2 2
31B.X15
=Dual speed
B
S55
l
0
ll
S55.X1
S55.X12 1 1
2
3
714 BU S55.X1 4
5 5 S55.X1
6 6
C
communicated to any third part or used for manufacturing purposes.
and may not without the permission of the said company be copied,
This document will remain the property of Metso Dynapac AB
31.27
30.4
31.6
15.5
TKZ/GE TKZ/LW
View Date Description Model D
20060615 Circuit diagram CA250 T3
E Reg. Scale Sheet / of
Dual speed 12 / 14
Kretsschema Rev. No.
Hög/ låg hastighet A 392423
Rev. Pls. Issued by Checked
Rev.970401
Change No. Date
Reference List
Device Name Description Sheet Ref. Device Name Description Sheet Ref.
A1 Warning/Hour/Fuel Instr /4.B2 H14 Rotating beacon Rops /6.A4
A1.X1 Connector 42pin /1.B3 H14.1 Rotating beacon Cab /8.B5
A8.X33 8 Pol MATENLOK /4.B3 H17 Side direction indicator lamp /7.B5
A8.X34 10 Pol MATENLOK /4.A3 H20 Side direction indicator lamp /7.B5
A12.X1 Connector 50pol /3.B4 H34 Pilot lamp 16mm /3.B3
B1 Hydraulik oil temp /4.C5 H35 Pilot lamp 16mm /3.B3
B2 Engine temp /4.B5 K1 Start relay 75A /1.B4
B3 Fuel sender /4.B5 K9 Flash relay /7.C1
B4 Air filter /4.C5 K10 Relay /7.D3
B10 Engine pressure /4.B5 K11 Light relay 30A /6.B2
E1 Working light Rops /6.C4 K30 Heater relay 30A /9.A2
E2 Working light Rops /6.C4 K30.1 Heater relay 30A /10.B2
E3 Working light Rops /6.D4 K31 Relay /3.A5
E4 Working light Rops /6.C4 M1 Starter /1.B6
E5 Working light /6.B3 M2 Heater blower /9.A4
E6 Working light /6.B4 M3 Wiper front /9.C5
E6.1 Working light /8.A4 M3.1 Wiper front /11.B5
E7 Working light /6.B3 M4 Wiper rear /11.A5
E8 Working light /6.B4 M5 Washer /11.C5
E8.1 Working light /8.A4 Q1 Circuit breaker /1.A5
E9 Headlight /7.A5 R1 Potentiometer with movable contact /1.C2
E10 Headlight /7.A5 R2 Resistor 1,5 Kohm /4.C3
E17 Registration plate lamp /7.C4 R1.X1 3Pol Plug /1.C2
E20 Working light Cab /8.B4 S1 Switch ignition /1.A1
E21 Working light Cab /8.B4 S2 Emergency Stop /1.B2
E22 Working light Cab /8.B4 S2.2 Contact block NC /1.B2
E23 Working light Cab /8.B4 S3 Sw Signal Horn /5.A3
E24 Inner light /10.C4 S4.1 Neutral position switch pump /2.B2
E26 Glow plug /3.B6 S5 Seat switch /2.B3
E13/H15 Direction indicator lamp. Front/Right /7.B5 S6 Vibb on/off /5.C3
E15/H18 Directio indicator lamp. Front/Left /7.A5 S12 Sw Vibration 3way LH /5.C2
E16/H27/H19 DirectionPos and stop rear right /7.C5 S14 Sw Parking brake /1.C4
E14/H26/H16 DirectionPos and stop rear left /7.C5 S16 Sw Traffic Light /7.A2
F1.1 Fuse 15 A. Blue /1.B1 S17 Sw_Hazard /7.C3
F1.2 Fuse 10 A. Red /5.A1 S18 Sw Rotating Beacon /6.A2
F1.3 Fuse 5A. Tan /3.A2 S21 Sw Direction Indicate /7.B3
F1.4 Fuse 10A. Red /6.A1 S22 Sw Working Light /6.C2
F1.5 Fuse 10A. Red /12.A1 S34 Sw Window wiper /9.B3
F1.6 Fuse 10A. Red /9.C2 S34.1 Sw Window wiper /11.B4
F1.8 Fuse 10A. Red /7.B1 S35 Window washer /11.C4
F2.1 Fuse 20A. Yellow /6.C1 S36 Sw Window wiper rear /11.A4
F2.2 Fuse 20A. Yellow /7.A1 S37 Door switch /10.C2
F10 Fuse 40A. Orange /1.A4 S38 Sw Fan /9.A4
F11 Fuse 40A. Orange /1.A4 S45 Sw RPM /2.C2
F20 Fuse 125A. Orange /1.A4 S52 Sw2waynon locking 16mm /3.C2
F21 Fuse 125A. Orange /1.A4 S53 Sw3waynon locking 16mm /3.B2
F22 Fuse 20A. Yellow /9.A1 S54 Sw Tractin controll /12.A3
F22.1 Fuse 20A. Yellow /10.B1 S55 Sw Dual speed /12.B4
F23 Fuse 30A. Green /1.B4 S1.X1 Ignition /1.A1
G1 Battery /1.A5 S1.X2 Ignition /1.B2
G2 Alternator /1.C6 S2.X1 Spade terminal /1.B2
G2.X1 4pol F 150series /1.B6 S2.X2 Spade terminal /1.B2
H10 Buzzer /2.A3 S2.X3 Spade terminal /1.B2
H11 Horn /5.A5 S2.X4 Spade terminal /1.B2
H11.1 Horn. Cab /9.C5 S2.X5 Spade terminal /1.B2
H13 Backup alarm /5.B5 S4.1.X1 4Pol /2.B2
Designed Approved Material Designation Part No
TKZ/GE TKZ/LW
View Date Description Model
Reference List 13 / 14
Kretsschema Rev. No.
Apparatlista A 392423
This drawing will remain the property of Metso Dynapac AB and may not without the permission
of the said company be copied, communicated to any third part or used for manufacturing purposes.
Rev. Pls. Issued by Checked
Rev.970401
Change No. Date
Reference List
Device Name Description Sheet Ref. Device Name Description Sheet Ref.
S5.X1 3Pol Plug /2.B3 X61 2 Pol Plug SureSeal /9.A2
S6.X1 2Pol Plug /5.C3 X.61 2 Pol Receptacle SureSeal /9.A2
V1 Diod /1.B5 X61.1 2 Pol Plug SureSeal /10.B2
X4 12 Pol Receptacle /4.B3 X.61.1 2 Pol Receptacle SureSeal /10.B2
X.4 12Pol Plug /4.B3 X62 2 Pol F /10.B2
X5 12 Pol Receptacle /3.B4 X70 Sealed splice /9.C2
X.5 12 Pol Plug /3.B3 X71 Sealed splice /9.D2
X6 12 Pol Receptacle /4.A3 X.75 1 Pol superseal /10.B5
X.6 12 Pol Plug /4.A3 X246 2 Pol Plug SureSeal /5.B5
X7 2 Pol Receptacle /6.A4 Y2 Break valve /1.C6
X.7 2 Pol Plug /6.A4 Y3 Vibration Valve Low /5.C5
X7.1 2 Pol Receptacle /8.C2 Y4 Vibration Valve High /5.C5
X.7.1 2 Pol Plug /8.C2 Y5 Rear axel valve /12.A5
X.8 2 Pol Plug /6.C4 Y6 Drum drive valve /12.B5
X8.1 2 Pol Receptacle /6.B3
X.8.1 2 pol Plug /8.B2
X8.2 2 Pol Receptacle /6.C4
X8.4 2 Pol Receptacle /8.B2
X9 2 Pol MTA /1.A3
X.9 2 Pol MTA /1.A3
X11 6 Pol Receptacle /7.A3
X.11 6 Pol Plug /7.A3
X12 6 Pol Receptacle /7.B3
X.12 6 Pol Plug /7.B3
X.13 2 Pol Plug /6.C4
X13.1 2 Pol Receptacle /6.B3
X.13.1 2 Pol Plug /8.B2
X13.2 2 Pol Receptacle /6.C4
X13.3 2 Pol Receptacle /8.A5
X13.4 2 Pol Receptacle /8.B2
X16 2 Pol Receptacle /12.B5
X.16 2 Pol Plug /12.B5
X17 2 Pol Receptacle /12.A5
X.17 2 Pol Plug /12.A5
X26 2 Pol Plug SureSeal /10.C2
X.26 2 Pol Receptacle SureSeal /10.C1
X.29 3 Pol Plug /1.A2
X29.1 2 Pol Receptacle SureSeal /9.C4
X.29.1 2 Pol Plug SureSeal /9.C4
X32 2 Pol Plug SureSeal /8.C3
X.32 2 Pol Receptacle SureSeal /8.C3
X40 2 Pol MTA /1.A3
X.40 2 Pol MTA /1.A3
X41 5 Pol Receptacle SureSeal /8.B3
X.41 5 Pol Plug Sure Seal /8.B3
X48 4 Pol Plug /3.B4
X58 2 Pol Plug SureSeal /9.A2
X.58 2 Pol Receptacle SureSeal /9.A2
X58.1 2 Pol Plug SureSeal /10.B1
X.58.1 2 Pol Receptacle SureSeal /10.B2
X59 2 Pol Receptacle SureSeal /9.C3
X.59 2 Pol Plug SureSeal /9.C3
X59.1 2 Pol Receptacle SureSeal /11.B3
X.59.1 2 Pol Plug SureSeal /11.B3
X60 2 Pol MTA /9.A6
X.60 2 Pol MTA /9.A6
Designed Approved Material Designation Part No
TKZ/GE TKZ/LW
View Date Description Model
Reference List 14 / 14
Kretsschema Rev. No.
Apparatlista A 392423
This drawing will remain the property of Metso Dynapac AB and may not without the permission
of the said company be copied, communicated to any third part or used for manufacturing purposes.
Dynapac Compaction Equipment AB
Box 504, SE-371 23 Karlskrona, Sweden
Dynapac Compaction Equipment AB
Box 504, SE-371 23 Karlskrona, Sweden