Professional Documents
Culture Documents
SMARTLYTE Quick Setup Guide
SMARTLYTE Quick Setup Guide
SETUP SETUP
PRINTER? CONFIG?
SETUP
INTERFACE?
SELECT
LANGUAGE?
The Smart Lab Solution. ECO# 8446 SOP05-5028F REV04 Effective date: 04/19/17
The Smart Lab Solution.
The World’s Most Reliable Electrolyte Analyzer
H-READY NA-K-Cl
1 2 3
Always wear gloves when
handling blood or parts
potentially contaminated
BLOOD / SERUM LIFT DOOR LOAD SAMPLE FROM WIPE PROBE with blood.
PLASMA SAMPLE LOAD SAMPLE TUBE / SYRINGE / CUP SHUT SAMPLE DOOR
Na K Cl
00.1 1.69 0.309
- CONTROL LEVEL
1,2,3 SAMPLE
4 5 6 - STD SAMPLE
- BICARBONATE/ACETATE
- URINE SAMPLE
7 Keep the main door
closed during
RESULTS QC, STD. DIALYSATE PRESS YES TO QC / STD SELECT TYPE AND measurement.
PRINTED & DISPLAYED URINE SAMPLE: PRESS NO DIALYSATE / URINE SAMPLE PROCEED WITH STEP 1
Maintenance Troubleshooting
Daily • Perform cleaning cycle (5 or more samples/daily) • Open front cover and check if all electrodes and the right side sample
• Perform conditioning cycle sensor have O-rings.
• Check printer paper supply • Make sure maintenance has been performed in accordance with
• Perform cleaning cycle (5 or more samples/daily) the maintenance schedule.
Weekly
• Clean sample probe and fill port • Check the FLUID PACK level by going to menu [VERIFY PACK?]
• Clean exterior analyzer surfaces under [OPERATOR SETTINGS?]
• Check for clots and crystals that may be forming in the tubing
Monthly • Clean the reference electrode housing
or in the measuring chamber.
(see instructions for Use - chapter 5)
• Pull pump windings from pump roller and check for kinked tubing
Semi-annually • Replace peristaltic pump tubing and tears in the tubing.
Annually • Replace main tubing harness • Start a calibration by going to [CALIBRATION?] and pressing YES