Professional Documents
Culture Documents
C32 10A UL Battery Charger Spec Sheet LEHE0141 02
C32 10A UL Battery Charger Spec Sheet LEHE0141 02
UL 10 AMP
BATTERY CHARGER
SPECIFICATION FEATURES
Input Supply 110-120 V · Electronically current limited at 105% of rated output
208-240 V · Alarm system
AC and DC Fuses 2 input and 2 output) · Digital Display
Output voltage 24V · Lightning and voltage transient protection
Frequency 50/60 Hz · Protection of connected equipment against load
Operating temperature -20°C ( -4°F) dump protection
to +60°C (140°F) · Constant voltage, current limited, 4-rate automatic
Housing constructed of rustproof anodized equalization
aluminum. · IP 20 housing
· AC isolated from DC
STANDARDS · Temperature Compensation
· C-UL listed to UL 1236 - On board temperature sensor with remote port
· NFPA 70, NFPA 110 · Auto AC line compensation
· CSA 22.2 No 107 certified · Output regulated by sensed battery voltage
· UL 1564
· CE DOC to EN 60335
· IBC Seismic Certification
LEHE0141-02
BATTERY CHARGER
Output Input
Amps Volts Hz Volts
110-120
10 24 50/60
208-240
OPTIONS
Information contained in this publication may be considered confidential. Discretion is recommended when distributing.
Materials and specifications are subject to change without notice.
CAT, CATERPILLAR, their respective logos, “Caterpillar Yellow,” the “Power Edge” trade dress as well as corporate
and product identity used herein, are trademarks of Caterpillar and may not be used without permission.
www.Cat-ElectricPower.com