Professional Documents
Culture Documents
P4M900T-M - v1.0
P4M900T-M - v1.0
Copyright
This publication, including all photographs, illustrations and software, is protected under
international copyright laws, with all rights reserved. Neither this manual, nor any of the
material contained herein, may be reproduced without written consent of the author.
Version 1.0
Disclaimer
The information in this document is subject to change without notice. The manufacturer
makes no representations or warranties with respect to the contents hereof and specifically
disclaims any implied warranties of merchantability or fitness for any particular purpose.
The manufacturer reserves the right to revise this publication and to make changes from
time to time in the content hereof without obligation of the manufacturer to notify any
person of such revision or changes.
Trademark Recognition
Microsoft, MS-DOS and Windows are registered trademarks of Microsoft Corp.
MMX, Pentium, Pentium-II, Pentium-III, Pentium-4, Celeron are registered trademarks of
Intel Corporation.
Other product names used in this manual are the properties of their respective owners and
are acknowledged.
Preface
ii
Declaration of Conformity
This device complies with part 15 of the FCC rules. Operation is subject to the following
conditions:
• This device may not cause harmful interference, and
• This device must accept any interference received, including interference
that may cause undesired operation
Chapter 1
Introducing the Motherboard Describes features of the motherboard.
Go to H page 1
Chapter 5
VIA VT8237 SATA RAID Describes the information about SATA
RAID Setup
Setup Guide
Go to H page 47
Preface
iii
TABLE OF CONTENTS
Preface i
Chapter 1 1
Introducing the Motherboard 1
Introduction.................................................................................................1
Feature..........................................................................................................2
Motherboard Components........................................................................4
Chapter 2 7
Installing the Motherboard 7
Safety Precautions......................................................................................7
Choosing a Computer Case.......................................................................7
Installing the Motherboard in a Case......................................................7
Checking Jumper Settings.........................................................................8
Setting Jumpers..............................................................................8
Checking Jumper Settings..............................................................9
Jumper Settings..............................................................................9
Connecting Case Components...............................................................10
Front Panel Connector.................................................................12
Installing Hardware...................................................................................13
Installing the Processor...............................................................13
Installing Memory Modules.........................................................15
Installing a Hard Disk Drive/CD-ROM/SATA Hard Drive........17
Installing a Floppy Diskette Drive...............................................19
Installing Add-on Cards..............................................................20
Connecting Optional Devices......................................................22
Connecting I/O Devices..........................................................................25
Chapter 3 27
Using BIOS 27
About the Setup Utility............................................................................27
The Standard Configuration........................................................27
Entering the Setup Utility..............................................................27
Updating the BIOS.......................................................................29
Using BIOS................................................................................................29
Standard CMOS Setup.................................................................30
Advanced Setup............................................................................31
Advanced Chipset Setup ..............................................................34
iv
Integrated Peripherals.................................................................34
Power Management Setup...........................................................35
PCI/PnP Setup.............................................................................37
PC Health Status..........................................................................37
Frequency/Voltage Control..........................................................39
Load Default Settings ..................................................................40
Supervisor Password..................................................................40
User Password............................................................................41
Save & Exit Setup.........................................................................41
Exit Without Saving......................................................................41
Chapter 4 43
Using the Motherboard Software 43
About the Software CD-ROM................................................................43
Auto-installing under Windows 2000/XP.............................................43
Running Setup..............................................................................43
Manual Installation..................................................................................46
Utility Software Reference.......................................................................46
Chapter 5 47
VIA VT8237 SATA RAID Setup Guide 47
VIA RAID Configurations.......................................................................47
Installing RAID Software & Drives.......................................................54
Using VIA RAID Tool.............................................................................54
Multi-Language Translation
1
Chapter 1
Introducing the Motherboard
Introduction
Thank you for choosing the P4M900T-M motherboard. This motherboard is a high perfor-
mance, enhanced function motherboard that supports the LGA775 socket Intel CoreTM 2
Duo/Pentium D/Pentium 4/Celeron D processors for high-end business or personal desktop
markets.
The motherboard incorporates the P4M900 Northbridge (NB) and VT8237A/VT8237S
Southbridge (SB) chipsets. The Northbridge supports a Front Side Bus (FSB) frequency of
1066/800/533 MHz FSB and Hyper-Threading technology. The memory controller sup-
ports DDR2 memory DIMM frequencies of 667/533/400. It supports two DDR2 Sockets
with up to maximum memory of 4 GB. Aside from the integrated UniChrome9 HC 3D/2D
Graphics & Video Controller, one PCI Express x 16 slot, intended for Graphics Interface
and fully compliant to the PCI Express Base Specification revision 1.1, provides users with
high-performance along with superior image and video quality.
The VT8237A/VT8237S Southbridge is a highly integrated peripheral controller, it includes
an integrated keyboard controller with PS2 mouse support, two-channel Serial ATA/RAID
hard disk controller, master mode enhanced Parallel IDE controller with full scatter/gather
capability and extension to UltraDMA-133/100/66 for 133/100/66 MB/sec transfer rate,
integrated USB 2.0 interface, supporting up to eight functional ports, and OnNow/ACPI
compliant advanced configuration and power management interface.
This motherboard is equipped with advanced full set of I/O ports in the rear panel, including
PS/2 mouse and keyboard connectors, COM1, LPT1, one VGA port, four USB ports, one
optional LAN port, one optional 1394a port and audio jacks for microphone, line-in and 6/
8-channel (optional) line-out.
Feature
Processor
This motherboard uses an LGA775 type of Intel CoreTM 2 Duo/Pentium D/Pentium 4/
Celeron D that carries the following features:
• Accommodates Intel CoreTM 2 Duo/Pentium D/Pentium 4/Celeron D proces-
sors
• Supports a system bus (FSB) of 1066/800/533 MHz
• Supports “Hyper-Threading” technology CPU
“Hyper-Threading” technology enables the operating system into thinking it’s hooked
up to two processors, allowing two threads to be run in parallel, both on separate
“logical” processors within the same physical processor.
Chipset
The P4M900 Northbridge (NB) and VT8237A/VT8237S Southbridge (SB) chipsets are
based on an innovative and scalable architecture with proven reliability and perfor-
mance.
P4M900 • Supports 66 MHz, 4x and 8x transfer modes, Ultra V-Link Host
interface with 1 GB/s total bandwidth
(NB)
• Supports up to two PCI Express ports, configured as one x16
and one x1 PCI Express lanes
• Integrated Chrome9 HC 3D/2D Graphics & Video Controller
• Advanced 64-bit DDR2/DDR SDRAM controller
• ACPI 2.0 and PCI Bus Power Management 1.1 complaint
VT8237A/ • Supports 16-bit 66 MHz Ultra V-Link Host interface with total
VT8237S bandwidth of 1 GB/s
(SB) • Compliant with PCI 2.3 specification at 33 MHz, supporting up
to 6 PCI masters
• Integrated Serial ATA/ Serial ATA II Host Controllers, supporting
data transfer rates up to 1.5/3.0 Gb/s (Serial ATA II with VT8237S
only)
• Integrated Dual channel UltraDMA 133/100/66 Master Mode
EIDE Controller
• USB 2.0 Controller, supporting up to 8 USB 2.0 ports
• Integrated keyboard Controller with PS2 mouse support
Memory
• Supports DDR2 667/533/400 DDR2 SDRAM DIMMs
• Accommodates two DDR2 unbuffered DIMMs
• Up to 2 GB per DIMM with maximum memory size up to 4 GB
Audio
This motherboard may support the following Audio chipset:
• 8 Channels of DAC support 16/20/24-bit PCM Format for 7.1 Audio Solution
• All ADCs support 48K/192kHz Independent Sample Rate
• Exceeds Microsoft PC2001 Requirements
• High Quality Differential CD input
• Three Stereo DACs support 16/20/24-bit PCM format for 5.1 channel audio
solution
• ADCs support 44.1k/48k/96k sample Rate
• Meet Microsoft WHQL/WLP 3.1x audio requirements
• Direct Sound 3DTM compatible
Integrated I/O
The motherboard has a full set of I/O ports and connectors:
• Two PS/2 ports for mouse and keyboard
• One serial port
• One parallel port
• One VGA port
• One 1394a port(optional)
• Four USB ports
• One LAN port (optional)
• Audio jacks for microphone, line-in and 6/8-channel (optional) line-out
BIOS Firmware
This motherboard uses AMI BIOS that enables users to configure system features
including the following:
• Power management
• Wake-up alarms
• CPU parameters
• CPU and memory timing
The firmware can also be used to set parameters for different processor clock speeds.
Some hardware specifications and software items are subject to change
without prior notice.
Introducing the Motherboard
4
Motherboard Components
LABEL COMPONENT
1 CPU Socket LGA775 socket for Intel CoreTM 2 Duo/Pentium
D/Pentium 4/Celeron D CPUs
2 CPU_FAN CPU cooling fan connector
3 DDRII1~2 240-pin DDR2 SDRAM slots
4 FDD Floppy disk drive connector
5 ATX1 Standard 24-pin ATX power connector
6 IDE2 Secondary IDE channel
7 IDE1 Primary IDE channel
8 IR1* Infrared header
9 PWR-FAN* Power fan connector
10 SATA1~2 Serial ATA connectors
11 BIOS_WP BIOS protect jumper
12 PANEL1 Front Panel switch/LED header
13 USB 3~4 Front Panel USB headers
14 CLR_CMOS Clear CMOS jumper
15 1394A1 * Onboard 1394a header
16 COM2 * Onboard serial header
17 WOL * Wake-On LAN connector
18 SPDIFO1 SPDIF out header
19 CD_IN1 Analog audio input header
20 AUDIO1 Front panel audio header
21 PCI1~2 32-bit add-on card slots
22 PCIEX1 PCI Express x1 Slot
23 PCIEX16 PCI Express x16 Slot
24 SYS_FAN System cooling fan connector
25 ATX_12V1 4-pin +12V power connector
This concludes Chapter 1. The next chapter explains how to install the motherboard.
Memo
Chapter 2
Installing the Motherboard
Safety Precautions
• Follow these safety precautions when installing the motherboard
• Wear a grounding strap attached to a grounded device to avoid damage from
static electricity
• Discharge static electricity by touching the metal case of a safely grounded
object before working on the motherboard
• Leave components in the static-proof bags they came in
• Hold all circuit boards by the edges. Do not bend circuit boards
Setting Jumpers
Use the motherboard jumpers to set system configuration options. Jumpers with more than
one pin are numbered. When setting the jumpers, ensure that the jumper caps are placed on
the correct pins.
Jumper Settings
Jumper Type Description Setting (default)
1-2: NORMAL
2-3: CLEAR
CLR_CMOS 3-pin Clear CMOS 1
Before clearing the
CMOS, make sure to
CLR_CMOS
turn off the system.
Users please note that the fan connector supports the CPU cooling
fan of 1.1A~2.2A (26.4W max.) at +12V.
Connecting pins 1 and 3 to a front panel mounted LED provides visual indication that data
is being read from or written to the hard drive. For the LED to function properly, an IDE
drive should be connected to the onboard IDE interface. The LED will also show activity
for devices connected to the SCSI (hard drive activity LED) connector.
Connecting pins 2 and 4 to a single or dual-color, front panel mounted LED provides power
on/off, sleep, and message waiting indication.
Reset Switch
Supporting the reset function requires connecting pin 5 and 7 to a momentary-contact
switch that is normally open. When the switch is closed, the board resets and runs POST.
Power Switch
Supporting the power on/off function requires connecting pins 6 and 8 to a momentary-
contact switch that is normally open. The switch should maintain contact for at least 50 ms
to signal the power supply to switch on or off. The time requirement is due to internal de-
bounce circuitry. After receiving a power on/off signal, at least two seconds elapses before
the power supply recognizes another on/off signal.
Installing Hardware
Installing the Processor
Caution: When installing a CPU heatsink and cooling fan make sure that
you DO NOT scratch the motherboard or any of the surface-mount
resistors with the clip of the cooling fan. If the clip of the cooling fan
scrapes across the motherboard, you may cause serious damage to the
motherboard or its components.
On most motherboards, there are small surface-mount resistors near the
processor socket, which may be damaged if the cooling fan is carelessly
installed.
Avoid using cooling fans with sharp edges on the fan casing and the clips.
Also, install the cooling fan in a well-lit work area so that you can clearly
see the motherboard and processor socket.
This motherboard has an LGA775 socket. When choosing a processor, consider the
performance requirements of the system. Performance is based on the processor design, the
clock speed and system bus frequency of the processor, and the quantity of internal cache
memory and external cache memory.
1. To achieve better airflow rates and heat dissipation, we suggest that you
use a high quality fan with 3800 rpm at least. CPU fan and heatsink
installation procedures may vary with the type of CPU fan/heatsink sup-
plied. The form and size of fan/heatsink may also vary.
2. DO NOT remove the CPU cap from the socket before installing a CPU.
3. Return Material Authorization (RMA) requests will be accepted only if the
motherboard comes with the cap on the LGA775 socket.
You must install at least one module in any of the two slots. Each module can be installed
with 2 GB of memory; total support memory capacity is 4 GB.
Do not remove any memory module from its antistatic packaging until you
are ready to install it on the motherboard. Handle the modules only by
their edges. Do not touch the components or metal parts. Always wear a
grounding strap when you handle the modules.
Installation Procedure
Refer to the following to install the memory modules.
1 This motherboard supports unbuffered DDR2 SDRAM .
2 Push the latches on each side of the DIMM slot down.
3 Align the memory module with the slot. The DIMM slots are keyed with
notches and the DIMMs are keyed with cutouts so that they can only be
installed correctly.
4 Check that the cutouts on the DIMM module edge connector match the notches
in the DIMM slot.
5 Install the DIMM module into the slot and press it firmly down until it seats
correctly. The slot latches are levered upwards and latch on to the edges of
the DIMM.
6 Install any remaining DIMM modules.
A-DATA M2OHY2F3G3110A1B0Z
Elixir M2U25664TUH4A0F-37B
256 MB Infineon HYS64T32400HU-3.7-A
Kingston KVR533D2N4
Ramaxel RML 1040M28D5F-533
AENEON AET660UD00-370A98U
DDR2 533
Infineon HYS64T64400HU-3.7-A
512 MB
Kingston KVR533D2N4/512
SAMSUNG M378T6553BGO-CD5
Apacer ELPIDA E5108AB-5C-E
1 GB
KINGSTON KVR533D2N4/1G
256 MB Infineon HYS64T32400HU-3S-A
A-DATA M2OAD5Q3H3163J1C52
CORSAIR CM2X512-5400C4PRO
Infineon HYS64T64400HU-3S-A
512 MB KINGMAX KLCC28F-A8MF5
KINGSTON KVR667D2N5/512
DDR2 667
NANYA NT512T64U88A0BY-3C
Transcend K4T51083QC
TwinMOS 8G-25JK5-EBT
TwinMOS 8D23JK-TT
1 GB Infineon HYS64T128920HU-3S-A
KINGSTON KVR667D2N5/1G
PQI MEAD-403LA1001-05B1
You must orient the cable connector so that the pin1 (color) edge of the
cable corresponds to the pin 1 of the I/O port connector.
IDE devices enclose jumpers or switches used to set the IDE device as MASTER or SLAVE.
Refer to the IDE device user’s manual. Installing two IDE devices on one cable, ensure that
one device is set to MASTER and the other device is set to SLAVE. The documentation of
your IDE device explains how to do this.
You must orient the cable connector so that the pin 1 (color) edge of the
cable corresponds to the pin 1 of the I/O port connector.
PCIEX16 Slot The PCI Express x16 slot is used to install an external PCI Express graph-
ics card that is fully compliant to the PCI Express Base Specification
revision 1.1.
PCIEX1 Slot The PCI Express x1 slot is fully compliant to the PCI Express Base Speci-
fication revision 1.1.
PCI1~2 This motherboard is equipped with two standard PCI slots. PCI stands for
Slots Peripheral Component Interconnect and is a bus standard for expansion
cards, which for the most part, is a supplement of the older ISA bus standard.
The PCI slots on this board are PCI v2.3 compliant.
Before installing an add-on card, check the documentation for the card
carefully. If the card is not Plug and Play, you may have to manually
configure the card before installation.
For some add-on cards, for example graphics adapters and network adapters,
you have to install drivers and software before you can begin using the add-on
card.
PS2 Mouse Use the upper PS/2 port to connect a PS/2 pointing device.
PS2 Keyboard Use the lower PS/2 port to connect a PS/2 keyboard.
Parallel Port (LPT1) Use LPT1 to connect printers or other parallel communications
devices.
Serial Port Use the COM port to connect serial devices such as mice or
(COM1) fax/modems.
LAN Port Connect an RJ-45 jack to the LAN port to connect your computer
(optional) to the Network.
1394a Port
(optional) Use the 1394a port to connect 1394 devices.
Audio Ports Use the audio jacks to connect audio devices. The D port is for
stereo line-in signal, while the F port is for microphone in signal.
This motherboard supports 8-channel audio devices that corre-
spond to the A, B, C, and E port respectively. In addition, all of the
3 ports, B, C, and E provide users with both right & left channels
individually. Users please refer to the following note for specific
port function definition.
A: Center & Woofer D: Line-in
B: Back Surround E: Front Out
C: Side Surround F: Mic_in Rear
Chapter 3
Using BIOS
The BIOS (Basic Input and Output System) Setup Utility displays the system’s configura-
tion status and provides you with options to set system parameters. The parameters are
stored in battery-backed-up CMOS RAM that saves this information when the power is
turned off. When the system is turned back on, the system is configured with the values you
stored in CMOS.
The settings made in the Setup Utility affect how the computer performs. Before using the
Setup Utility, ensure that you understand the Setup Utility options.
Using BIOS
28
KEY FUNCTION
ESC Exits the current menu
<> Scrolls through the items on a menu
+/-/PU/PD Modifies the selected field’s values
F1 Displays a screen that describes all key functions
F9 Loads an optimized setting for better performance
F10 Saves the current configuration and exits setup
ESC Exits the current menu
Using BIOS
29
Using BIOS
When you start the Setup Utility, the main menu appears. The main menu of the Setup
Utility displays a list of the options that are available. A highlight indicates which option is
currently selected. Use the cursor arrow keys to move the highlight to other options. When
an option is highlighted, execute the option by pressing <Enter>.
Some options lead to pop-up dialog boxes that prompt you to verify that you wish to
execute that option. Other options lead to dialog boxes that prompt you for information.
Some options (marked with a triangle ) lead to submenus that enable you to change the
values for the option. Use the cursor arrow keys to scroll through the items in the submenu.
In this manual, default values are enclosed in parenthesis. Submenu items are denoted by a
triangle .
Using BIOS
30
<> : Move Enter : Select +/-/: Value F10: Save ESC: Exit
F1:General Help F9: Optimized Defaults
Using BIOS
31
Advanced Setup
This page sets up more advanced information about your system. Handle this page with
caution. Any changes can affect the operation of your computer.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Advanced Setup
< > : Move Enter : Select +/-/: Value F10: Save ESC: Exit
F1:General Help F9: Optimized Defaults
Using BIOS
32
Help item
Hard Disk Drives
_____________________________________________________
1st Drive ST340016A
Specifies the boot se-
quence from the avail-
able devices.
<> : Move Enter : Select +/-/: Value F10: Save ESC: Exit
F1:General Help F9: Optimized Defaults
Help item
Removable Drives
_____________________________________________________
1st Drive 1st FLOPPY DRIVE
Specifies the boot se-
quence from the avail-
able devices.
<> : Move Enter : Select +/-/: Value F10: Save ESC: Exit
F1:General Help F9: Optimized Defaults
Using BIOS
33
Help Item
AGP Aperture Size 128MB
DRAM Timing Auto Options
VGA Frame Buffer Size 64MB
32MB
64MB
128MB
256MB
512MB
1GB
< > : Move Enter : Select +/-/: Value F10: Save ESC: Exit
F1:General Help F9: Optimized Defaults
Using BIOS
34
Integrated Peripherals
This page sets up some parameters for peripheral devices connected to the system.
< > : Move Enter : Select +/-/: Value F10: Save ESC: Exit
F1:General Help F9: Optimized Defaults
Using BIOS
35
Use this item to enable or disalbe the High Definition audio device.
Help Item
ACPI Suspend Type S1
Suspend Time Out Disabled
Resume on RTC Alarm Disabled Select the ACPI state
Resume On Ring Disabled used for System Sus-
Resume On PME# Disabled pend.
Resume by WOL Disabled
Resume On PS/2 Mouse Disabled
Resume by PCI-E PME Disabled
PWRON After PWR-Fail Power Off
Soft-Off By Power Button Instant Off
USB Device Wakeup Function Enabled
Resume from PS2 KB Disabled
Wake-Up Key Any Key
< > : Move Enter : Select +/-/: Value F10: Save ESC: Exit
F1:General Help F9: Optimized Defaults
Using BIOS
36
Using BIOS
37
Options
PCI
PCI Express Card
<> : Move Enter : Select +/-/: Value F10: Save ESC: Exit
F1:General Help F9: Optimized Defaults
<> : Move Enter : Select +/-/: Value F10: Save ESC: Exit
F1:General Help F9: Optimized Defaults
Using BIOS
38
<> : Move Enter : Select +/-/: Value F10: Save ESC: Exit
F1:General Help F9: Optimized Defaults
Using BIOS
39
Frequency/Voltage Control
This page helps you manually configure the CPU of this motherborad. The system will
automatically detect the type of installed CPU and make the appropriate adjustments to
these items on this page.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Frequency/Voltage Control
Help Item
Manufacturer : Intel
Ratio Actual Value : 9
DRAM Frequency Auto Options
CPU Over-clocking Func. Disabled
CPU Frequency : 266MHz Auto
Memory Voltage +0.10V 333MHz
CPU Voltage Normal 400MHz
Auto Detect DIMM/PCI Clk Enabled 533MHz
Spread Spectrum Disabled
< > : Move Enter : Select +/-/: Value F10: Save ESC: Exit
F1:General Help F9: Optimized Defaults
Manufacturer (Intel)
This item indicates the brand of the CPU installed in your system.
Ratio Actual Value (9)
This item determinese the actual value of ratio.
DRAM Frequency (Auto)
This item enables users to adjust the DRAM frequency. The default setting is auto and we
recommend users leave the setting unchanged. Modify it at will may cause the system to be
unstable.
CPU Over-clocking Func. (Disabled)
This item decides the CPU over-clocking function/frequencyinstalled in your system. If the
over-clocking fails, please turn offthe system power. And then, hold the PageUp key
(similar to theClear CMOS function) and turn on the power, the BIOS willrecover the safe
default.
CPU Frequency (266MHz)
This item indicates the current CPU frequency. Users can not make any change to this item.
Please noted that the frequency will be varied with different CPU.
Memory Voltage (+0.10V)
This item determines the DDR voltage adjustment.
CPU Voltage (Normal)
This item determines CPU voltage adjustment.
Auto Detect DIMM/PCI Clk (Enabled)
When this item is enabled, BIOS will disable the clock signal of free DIMM/PCI slots.
Spread Spectrum (Disabled)
If you enable spread spectrum, it can significantly reduce the EMI (Electro-Magnetic
interface) generated by the system.
Using BIOS
40
Supervisor Password
This page helps you install or change a password.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Supervisor Password
<> : Move Enter : Select +/-/: Value F10: Save ESC: Exit
F1:General Help F9: Optimized Defaults
Supervisor Password (Not Installed)
This item indicates whether a supervisor password has been set. If the password has benn
installed, Installed displays. If not, Not Installed displays.
Change Supervisor Password (Press Enter)
You can select this option and press <Enter> to access the sub menu. You can use the sub
menu to change the supervisor password.
Press <Esc> to return to the main menu setting page.
Using BIOS
41
User Password
This page helps you install or change a password.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
User Password
<> : Move Enter : Select +/-/: Value F10: Save ESC: Exit
F1:General Help F9: Optimized Defaults
User Password (Not Installed)
This item indicates whether a user password has been set. If the password has been installed,
Installed displays. If not, Not Installed displays.
Change User Password (Press Enter)
You can select this option and press <Enter> to access the sub menu. You can use the sub
menu to change the user password.
Press <Esc> to return to the main menu setting page.
Using BIOS
42
Memo
Using BIOS
43
Chapter 4
Using the Motherboard Software
About the Software CD-ROM
The support software CD-ROM that is included in the motherboard package contains all
thedrivers and utility programs needed to properly run the bundled products. Below you can
finda brief description of each software program, and the location for your
motherboardversion. More information on some programs is available in a README file,
located in thesame directory as the software. Before installing any software, always inspect
the folder forfiles named README.TXT, INSTALL.TXT, or something similar. These
files may con-tain important information that is not included in this manual.
Never try to install all software from folder that is not specified for use with your
motherboard.
The notice of Intel HD audio installation (optional): The Intel High Definition
audio functionality unexpectedly quits working in Windows Server 2003 Service
Pack 1 or Windows XP Professional x64 Edition. Users need to download and
install the update packages from the Microsoft Download Center “before” install-
ing HD audio driver bundled in the Driver CD. Please log on to http://
support.microsoft.com/default.aspx?scid=kb;en-us;901105#appliesto for more
information.
Auto-installing under Windows 2000/XP
The Auto-install CD-ROM makes it easy for you to install the drivers and software for your
motherboard.
If the Auto-install CD-ROM does not work on your system, you can still install
drivers through the file manager for your OS (for example, Windows Ex-
plorer). Refer to the Utility Folder Installation Notes later in this chapter.
The support software CD-ROM disc loads automatically under Windows 2000/XP. When
you insert the CD-ROM disc in the CD-ROM drive, the autorun feature will automatically
bring up the install screen. The screen has three buttons on it, Setup, Browse CD and Exit.
If the opening screen does not appear; double-click the file “setup.exe” in
the root directory.
Using the Motherboard Software
44
Setup Tab
Setup Click the Setup button to run the software installation program. Select
from the menu which software you want to install.
Browse CD The Browse CD button is the standard Windows command that allows
you to open Windows Explorer and show the contents of the support
CD.
Before installing the software from Windows Explorer, look for a file
named README.TXT, INSTALL.TXT or something similar. This file
may contain important information to help you install the software
correctly.
Some software is installed in separate folders for different operating
systems.
In install the software, execute a file named SETUP.EXE or INSTALL.EXE
by double-clicking the file and then following the instructions on the
screen.
Application Tab
Lists the software utilities that are available on the CD.
Read Me Tab
Displays the path for all software and drivers available on the CD.
Running Setup
Follow these instructions to install device drivers and software for the motherboard:
1. Click Setup. The installation program begins:
The following screens are examples only. The screens and driver lists will be
different according to the motherboard you are installing.
The motherboard identification is located in the upper left-hand corner.
3. Check the box next to the items you want to install. The default options are recommended.
4. Click Next run the Installation Wizard. An item installation screen appears:
Drivers and software are automatically installed in sequence. Follow the onscreen instruc-
tions, confirm commands and allow the computer to restart a few times to complete the
installation.
Manual Installation
Insert the CD in the CD-ROM drive and locate the PATH.DOC file in the root directory.
This file contains the information needed to locate the drivers for your motherboard.
Look for the chipset and motherboard model; then browse to the directory and path to
begin installing the drivers. Most drivers have a setup program (SETUP.EXE) that auto-
matically detects your operating system before installation. Other drivers have the setup
program located in the operating system subfolder.
If the driver you want to install does not have a setup program, browse to the operating
system subfolder and locate the readme text file (README.TXT or README.DOC) for
information on installing the driver or software for your operating system.
Chapter 5
VIA VT8237 SATA RAID Setup Guide
iii Either end of the Serial ATA data cable can be connected to the SATA hard disk
or the SATA connector on the motherboard.
1 Install the Serial ATA hard disks into the drive bays.
2 Connect one end of the Serial ATA cable to the motherboard’s primary Serial
ATA connector (SATA1).
3 Connect the other end of Serial ATA cable to the master Serial ATA hard disk.
4 Connect one end of the second Serial ATA cable to the motherboard’s sec-
ondary Serial ATA connector (SATA2).
5 Connect the other end of Serial ATA cable to the secondary Serial ATA hard
disk.
6 Connect the Serial ATA power cable to the power connector on each drive.
7 Proceed to section “Entering VIA Tech RAID BIOS Utility” for the next proce-
dure.
Entering VIA Tech RAID BIOS Utility
1 Boot-up your computer.
2 During POST, press <TAB> to enter VIA RAID configuration utility. The follow-
ing menu options will appear.
The RAID BIOS information on the setup screen shown is for reference
only. What you see on your screen may not by exactly the same as shown.
On the upper-right side of the screen is the message and legend box. The keys on the legend
box allow you to navigate through the setup menu options. The message describes the
function of each menu item. The following lists the keys found in the legend box with their
corresponding functions.
F1 View Array
mn Move to the next item
Enter Confirm the selection
ESC Exit
Create Array
1 In the VIA RAID BIOS utility main menu, select Create Array then press the
<Enter> key. The main menu items on the upper-left corner of the screen are
replaced with create array menu options.
2 Select RAID 0 for performance from the menu and press <Enter>. From this
point, you may choose to auto-configure the RAID array by selecting Auto
Setup for Performance or manually configure the RAID array for stripped
sets. If you want to manually configure the RAID array continue with next
step, otherwise, proceed to step #5.
3 Select Select Disk Drives, then press <Enter>. Use arrow keys to select
disk drive/s, then press <Enter> to mark selected drive. An asterisk is placed
before the selected drive.
4 Select Block Size, then press <Enter> to set array block size. Lists of valid
array block sizes are displayed on a pop-up menu.
Use arrow keys to move selection bar on items and press <Enter> to select.
5 Select Start Create Process and press <Enter> to setup hard disk for RAID
system. The following confirmation appears:
The same confirmation message appears when the
Auto Setup for Performance option is selected.
2 Select RAID 1 for data protection from the menu and press <Enter>. Select
next task from pop-up menu. The task Create only creates the mirrored set
without creating a backup. Create and duplicate creates both mirrored set
and backup.
3 Select task and press <Enter>. The screen returns to Create Array menu
items. From this point, you may choose to auto-configure the RAID array by
selecting Auto Setup for Data Security or manually configure the RAID array
for mirrored sets. If you want to manually configure the RAID array continue
with next step, otherwise, proceed to step #5.
4 Select Select Disk Drives, then press <Enter>. Use arrow keys to select disk
drive/s, then press <Enter> to mark selected drive. (An asterisk is placed
before a selected drve.)
5 Select Start Create Process and press <Enter> to setup hard disk for RAID
system. The following confirmation message appears:
Delete Array
1 In the VIA RAID BIOS utility main menu, select Delete Array then press the
<Enter> key. The focus is directed to the list of channel used for IDE RAID
arrays.
2 Press the <Enter> key to select a RAID array to delete. The following confir-
mation message appears.
If user selects Continue to boot, it will enable duplicating the array after booting into OS.
Highlight the target hard drive and press <Enter>, a warning message will appear. Press Y to
use that hard drive to rebuild, or press N to cancel. Please note selecting option Y will
destroy all the data on the selected hard drive.
4. Continue to boot:
This item enables BIOS to skip the problem and continue booting into OS.
The InstallShield Wizard will begin automatically for installation. Click on the Next
button to proceed the installation in the welcoming window.
Put a check mark in the check box to install the feature you want. Then click Next button
to proceed the installation.
The main interface is divided into two windows and the toolbar above contain the main
functions. Click on these toolbar buttons to execute their specific functions. The left
windowpane displays the controller and disk drives and the right windowpane displays the
details of the controller or disk drives. The available features are as following:
View by Controller
View by Devices
Help Topics
It means that VT8237 SATA RAID only has the feature of monitoring the statuses of RAID
0 and RAID 1.
Click on the plus (+) symbol next to Array 0--RAID 0 to see the details of each disk.
You may also use the same or button to view the statuses of Array 0--
RAID 1.
Click on the plus (+) symbol next to Array 0; RAID 1 to see the details of each disk.
Memo
Français
Processeur
Cette carte mère utilise un type LGA775 de Intel CoreTM2 Duo/Pentium D/Pentium 4/Celeron
D présentant les fonctionnalités suivantes :
• Reçoit des processeurs Intel CoreTM2 Duo/Pentium D/Pentium 4/Celeron
D
• Prend en charge un bus système (FSB) de 1066/800/533 MHz
• Prend en charge le CPU de technologie " Hyper-Threading"
La technologie “Hyper-Threading” permet au système d’exploitation de penser qu’il est
connecté à deux processeurs, permettant d’exécuter deux threads en parallèle, à la fois sur des
processeurs «logiques» séparés dans le même processeur physique.
Chipset
Les chipsets P4M900 Northbridge (NB) et VT8237A/VT8237S Southbridge (SB) sont basés
sur une architecture novatrice et dimensionnable avec une fiabilité et des performances
prouvées
P4M900 • Prend en charge les modes de transfert 66 MHz,4X/8X, interface
(NB) d’hôte Ultra V-Link avec bande passante totale de 1 Go/s
• Deux contrôleurs PCI Express séparés, configurées comme une
ligne x16 et une ligne x1 PCI Express
• Contrôleur Graphique et Vidéo 3D/2D Chrome9 HC intégré
• Contrôleur SDRAM DDR2/DDR 64 bits avancés
• Conforme ACPI 2.0 et PCI Bus Management 1.1
Mémoire
• Prend en charge les DIMM DDR2 SDRAM DDR2 667/533/400
• Reçoit deux DDR2 DIMM sans tampon
• Jusqu’à 2 Go par DIMM avec une taille de mémoire maximum de 4 Go
Audio
Cette carte mère prend en charge les chipsets Audio suivants :
• 8 canaux de format PCM 16/20/24-bits de support DAC pour solution
audio 7.1
• Tous les ADC prennent en charge la vitesse d’échantillonnage
indépendante 48K/192kHz
• Dépasse les exigences de Microsoft PC2001
• Entrée CD différentielle de haute qualité
• Trois DAC stéréo prenant en charge le format PCM 16/20/24 bits pour
solution audio de canal 5.1
• ADC prenant en charge la vitesse d’échantillonnage de 44,1k/48k/96k
• Conforme aux exigences audio de Microsoft WHQL/WLP 3.1x
• Compatible Direct Sound 3DTM
Multi-Language Translation
LAN interne
Français
Options d’extension
La carte mère est livrée avec les options d’extensions suivantes:
• Un logement PCI Express x16 pour Interface Graphique
• Un logement PCI Express x1
• Deux logements conforme PCI v2.3 32 bits
• Deux connecteurs à profil bas IDE de 40 broches prenant en charge jusqu’à
quatre périphériques IDE
• Une interface de lecteur de disquette
• Deux connecteurs SATA à 7 broches
Cette carte mère prenant en charge la maîtrise de bus UltraDMA avec vitesses de transfert de
133/100/66 Mo/s.
E/S intégrées
La carte mère possède un jeu complet de ports d’E/S et de connecteurs:
• Deux ports PS/2 pour souris et clavier
• Un port série
• Un port parallèle
• Un port VGA
• Un port 1394a (optionnel)
• Quatre ports USB
• Un port LAN (optionnel)
• Prises audio pour microphone, ligne d’entrée et ligne de sortie/sortie à 6/8
canaux (en option)
Microprogramme BIOS
La carte mère utilise AMI BIOS qui permet aux utilisateurs de configurer de nombreuses
caractéristiques du système comprenant les suivantes:
• Gestion de l’alimentation
• Alarmes de réveil
• Paramètres de CPU
• Synchronisation du CPU et de la mémoire
Le microprogramme peut aussi être utilisé pour définir les paramètres pour les vitesses d’horloges
de différents processeurs.
Multi-Language Translation
Feature
Prozessor
Dieses Mainboard verwendet einen LGA775 Typ Intel CoreTM2 Duo/Pentium D/Pentium
Deutsche
4/Celeron D mit den folgenden Eigenschaften:
• Nimmt Intel CoreTM2 Duo/Pentium D/Pentium 4/Celeron D Prozessoren
auf
• Unterstützt einen Systembus (FSB) mit 1066/800/533 MHz
• Unterstützt eine CPU mit „Hyper-Threading“ Technologie
Bei der „Hyper-Threading” Technologie „denkt” das Betriebssystem, dass es an zwei
Prozessoren angeschlossen ist. Dadurch können im selben physikalischen Prozessor zwei
Threads parallel auf separaten „logischen“ Prozessoren laufen.
Chipsatz
Die Chipsätze P4M900 Northbridge (NB) und VT8237A/VT8237S Southbridge (SB) basieren
auf einer innovativen und skalierbaren Architektur mit bewiesener Zuverlässigkeit und
Leistung.
P4M900 • Unterstützt Transfermodi von 66 MHz, 4x/8x, Ultra V-Link
(NB) Host-Interface mit einer Bandbreite von insgesamt 1 GB/s
• Unterstützt bis zu zwei PCI Express-Anschlüsse, konfiguriert
als ein x16 und ein x1 PCI Express-Lanes
• Integrierter Chrome9 HC 3D/2D Grafik- & Videocontroller
• Fortschrittlicher 64-Bit DDR2/DDR SDRAM-Controller
• Entspricht ACPI 2.0 und PCI Bus Management 1.1
VT8237A • Unterstützt 16-Bit 66 MHz Ultra V-Link Host-Interface mit
/VT8237S einer Bandbreite von insgesamt 1 GB/s
• Entspricht den Richtlinien der PCI 2.3- spezifikationen von
(SB) 33 MHz, mit einer Unterstützung von bis zu 6 PCI Master
• Integrierte Serial ATA/ Serial ATA II Host-Controller, unter-
stützen Datentransferraten von bis zu 1.5/3.0 Gb/s (nur
Serial ATA II mit VT8237S)
• Eingebauter Doppel-Kanal UltraDMA 133/100/66 Master
Modus EIDE-Controllerr
• USB 2.0 Controller, mit einer Unterstützung für 8 USB 2.0
Steckvorrichtungen
• Eingebauter Tastatur-Controller mit einer PS2-Maus-Unter-
stützung
Speicher
• Unterstützt DDR2 667/533/400 DDR2 SDRAM DIMMs
• Es können zwei ungepufferte DDR2-DIMMs aufgenommen werden.
• Bis zu 2 GB pro DIMM mit maximaler Speicherkapazität von bis zu 4 GB.
Audio
Dieses Mainboard kann einen der folgenden Audio-Chipsätze unterstützen:
• 8-Kanal DAC Unterstützung 16/20/24-Bit PCM-Format für 7.1 Audio
• Alle ADCs unterstützen eine unabhängige Samplingrate von
48K/192kHz
• Übertrifft Microsoft PC2001 Anforderungen
• Hochwertiger Differential-CD-Eingang
• Drei Stereo-DACs unterstützen 16/20/24-Bit PCM-Format für 5.1 Kanal-
Audiolösung
• ADCs unterstützen eine Samplingrate von 44.1k/48k/96k
• Entspricht den Anforderungen von Microsoft WHQL/WLP 3.1x
• Kompatibel mit Direct Sound 3DTM
Multi-Language Translation
Integriertes LAN(Optional)
Der Onboard-LAN-Kontroller hat folgende Eigenschaften:
• Unterstützt den Betrieb bei 10/100 Mb/s N-Way Auto-Negotiation
Deutsche
Erweiterungsoptionen
Das Mainboard bietet die folgenden Erweiterungsoptionen:
• Ein PCI-Express x16 Steckplatz für eine Grafikschnittstelle
• Ein PCI Express x1 Steckplatz
• Zwei 32-bit PCI v2.3-Steckplätze
• Zwei 40-Pin IDE Flachstecker, die bis zu 4 IDE-Geräte unterstützen
• Ein Steckplatz für ein Diskettenlaufwerk
• Zwei 7-Pin SATA-Stecker
Dieses Motherboard unterstützt UltraDMA Bus Mastering mit einer Übertragungsrate von
133/100/66 MB/Sek.
Integrierte I/O-Schnittstellen
Das Mainboard verfügt über einen kompletten Satz von I/O-Schnittstellen und Anschlüssen:
• Zwei PS/2-Schnittstellen für Tastatur und Maus
• Eine serielle Schnittstelle
• Eine parallele Schnittstelle
• Eine VGA-Schnittstelle
• Eine 1394a-Schnittstelle (optional)
• Vier USB-Schnittstellen
• Eine LAN-Schnittstelle (optional)
• Audiobuchsen für Mikrofon, Line-in und 6/8-Kanal (optional) Line-out
BIOS Firmware
Dieses Mainboard setzt das AMI BIOS ein, mit dem der Anwender viele Systemeigenschaften
selbst konfigurieren kann, einschließlich der folgenden:
• Energieverwaltung
• Wake-up Alarm
• CPU-Parameter
• CPU- und Speichertiming
Mit der Firmware können auch Parameter für verschiedene Prozessortaktgeschwindigkeiten
eingestellt werden.
Multi-Language Translation
Caratteristiche
Processore
Questa scheda madre utilizza un tipo LGA775 di Intel CoreTM2 Duo/Pentium D/Pentium 4/
Celeron D che offre le seguenti caratteristiche:
• Alloggia processori Intel CoreTM2 Duo/Pentium D/Pentium 4/Celeron D
• Supporto di un bus di sistema (FSB) da 1066/800/533 MHz
• Supporto di CPU con tecnologia “Hyper-Threading”
Italiano
La tecnologia “Hyper-Threading” simula per il sistema operativo una sorta di doppio
processore e consente a due processi di essere eseguiti in parallelo, ciascuno su un diverso
processore “logico” all’interno del medesimo processore fisico.
Chipset
Il chipset P4M900 Northbridge (NB) e VT8237A/VT8237S Southbridge (SB) è basato su
un'innovativa architettura scalabile e offre affidabilità e prestazioni comprovate.
P4M900 • Supporto di interfaccia per Ultra V-Link a 66 MHz, modalità di
(NB) trasferimento 4X/8X, con larghezza di banda totale di 1 GB/s
• Supporto di fino a due porte PCI Express, configurate una
come corsia PCI Express x16 e una come corsia PCI Express
x1
• Controller grafica 3D/2D e video Chrome9 HC 3D/2D inte-
grato
• Controller SDRAM DDR2/DDR a 64 bit avanzato
• Conforme ad ACPI 2.0 e PCI Bus Management 1.1
VT8237A • Supporto di interfaccia per Host Ultra V-Link a 66 MHz a 16
/VT8237S bit con larghezza di banda totale di 1 GB/s
(SB) • Conforme alle specifiche PCI 2.3 a 33 MHz, in grado di sup-
portare fino a 6 master PCI.
• Host controller Serial ATA/Serial ATA II integrati, con supporto
di velocità di trasferimento dati fino a 1,5/3,0 Gb/s (solo Serial
ATA II con VT8237S)
• Controller Master integrato UltraDMA a due canali 133/100/66
Master Mode EIDE Controller
• Controller USB 2.0, in grado di supportare sino a 8 porte USB
2.0.
• Controller integrato per la Tastiera e supporto mouse PS2
Memoria
• Supporto di DIMM SDRAM DDR2 DDR2 667/533/400
• Alloggia 2 DDR2 DIMM unbuffered
• Dimensione massima della DIMM pari ad 2 GB per un ammontare massimo
di 4 GB di memoria
Audio
La scheda madre offre supporto per uno dei seguenti chipset Audio:
• 8 canali per formato PCM a 16/20/24 bit con supporto DAC per soluzioni
audio 7.1
• Tutti i convertitori ADC supportano una velocità di campionamento
indipendente di 48 K/192 kHz
• Superiore ai requisiti Microsoft PC2001
• Ingresso CD differenziale ad alta qualità
• Tre DAC stereo supportano il formato PCM a 16/20/24 bit per soluzioni
audio a 5.1 canali
• Supporta ADC con sample rate di 44.1k/48k/96k
• Conforme ai requisiti audio di WHQL e WLP 3.1x di Microsoft
• Compatibile con Direct Sound 3DTM
Multi-Language Translation
LAN integrata (opzionale)
La funzionalità LAN integrata sulla scheda offre le seguenti caratteristiche:
• Supporto di NWay Auto-negotiation a 10/100 Mb/s
• Supporto di funzionalità Wake-on-LAN e riattivazione remota
• Supporto di funzionalità half/full duplex
• Supporto di NWay Auto-negotiation a 10Mb/s e 100 Mb/s
Italiano
Opzioni di espansione
La scheda madre è dotata delle seguenti opzioni di espansione:
• Uno slot PCI Express x16 per interfaccia grafica
• Uno slot PCI Express x1
• Due slot PCI v2.3 a 32 bit
• Due connettori a basso profilo IDE a 40 pin per il supporto di fino a quattro
dispositivi IDE
• Un’interfaccia per unità disco floppy
• Due connettori SATA a 7 pin
Questa scheda madre supporta bus master UltraDMA con tasso di trasferimento di 133/100/66
MB/s.
I/O integrati
La scheda madre offre una serie completa di porte e connettori I/O:
• Due porte PS/2 per mouse e tastiera
• Una porta seriale
• Una porta parallela
• Una porta VGA
• Una porta 1394a (opzionale)
• Quattro porte USB
• Una porta LAN (opzionale)
• Prese jack audio per microfono, line-in e line-out a 6/8 canali (opzionale)
Firmware BIOS
La scheda madre si avvale del BIOS AMI che consente la configurazione personalizzata di molte
funzionalità del sistema, tra cui:
• Gestione dell’alimentazione
• Allarmi di attivazione
• Parametri CPU
• Sincronizzazione di CPU e memoria
Il firmware consente inoltre di impostare i parametri per diverse velocità di clock del
processore.
Alcune specifiche hardware e voci di software possono essere modificate senza
preavviso.
Multi-Language Translation
Característica
Procesador
Esta placa principal usa un tipo LGA775 de Intel CoreTM2 Duo/Pentium D/Pentium 4/Celeron
D que lleva las sigtes características:
• Acomoda procesadores Intel CoreTM2 Duo/Pentium D/Pentium 4/Celeron
D
• Soporta un bus de sistema (FSB) de 1066/800/533 MHz
• Soporta la CPU con tecnología "Hyper-Threading"
La tecnología “Hyper-Threading” habilita el sistema operativo en pensar que está conectado
a dos procesadores, que permite dos hilos a correr en paralelo, ambos en procesadores
Español
"lógicos" separados dentro de un mismo procesador físico.
Chipset
El chipset P4M900 Northbridge (NB) y VT8237A/VT8237S Southbridge (SB) se basa de una
arquitectura innovadora y escalable con el rendimiento y fiabilidad comprobados.
P4M900 • Soporta modos de transferencia 66 MHz, 4x/8x, interfaz U
(NB) ltra V-Link Host con la ancha de banda total de 533 MB/s
• Soporta hasta dos puertos PCI Express, configurado como
una línea x16 y una línea x1 PCI Express
• Controlador de Gráficas & Vídeo 3D/2D UniChrome Pro
Integrado
• Controlador 64-bit DDR2/DDR SDRAM avanzado
• Conformidad de ACPI 2.0 y PCI Bus Management 1.1
VT8237A / • Soporta interfaz 16-bit 66 MHz Ultra V-Link Host con
VT8237S ancha de banda total de 1GB/s
(SB) • Conforme con la especificación PCI 2.3 en 33 MHz, que
soporta hasta 6 másters de PCI
• Controladores Anfitriones Serial ATA/ Serial ATA II inte-
grados, soporta índices de transferencia de datos hasta
1.5/3.0 Gb/s (Serial ATA II con VT8237S solamente)
• Controlador EIDE del Modo Máster UltraDMA 133/100/66
de Canal Dual integrado
• Controlador USB 2.0, con soporte para 8 puertos USB 2.0
• Controlador de teclado integrado con soporte de ratón
PS2
Memoria
• Soporta SDRAM DIMMs de DDR2 667/533/400 DDR2
• Acomoda dos DIMMS DDR2 sin buffer
• Hasta 2 GB por DIMM con el tamaño de memoria máximo hasta 4 GB
Audio
Esta placa principal puede soportar uno de los sigtes. chipset Audio:
• 8 canales de formato PCM de 16/20/24-bit de soporte DAC para la
solución de audio 7.1
• Todos los ADCs soportan Índice de Muestreo Independiente de
48K/192kHz
• Excede los Requisitos de Microsoft PC2001
• Entrada de CD diferencial de alta calidad
• Tres DACs Estéreo soportan formato PCM de 16/20/24-bit para la
solución de audio de canal 5.1
• ADCs soportan índice de muestreo de 44.1k/48k/96k
• Satisface los requisitos de audio de Microsoft WHQL/WLP 3.1x
• Compatible con Direct Sound 3DTM
Multi-Language Translation
LAN Abordo (optativo)
El controlador LAN abordo provee las sigtes. características:
Opciones de Expansión
La placa principal viene con las sigtes. opciones de expansión:
• Un ranura PCI Express x16 para la Interfaz de Gráficas
• Una ranura PCI Express x1
• Dos ranuras conforme con 32-bit PCI v2.3
• Dos conectores de bajo perfil IDE de 40-pin que soporta hasta 4 dispositivos
IDE
• Una interfaz de la unidad de disco floppy
• Dos conectores SATA de 7-pin
Esta placa principal soporta el mastering de bus UltraDMA con índices de transferencia de
133/100/66 MB/s.
I/O Integrado
La placa principal tiene un juego completo de puertos y conectores I/O:
• Dos puertos PS/2 para ratón y teclado
• Un puerto serial
• Un puerto paralelo
• Un puerto VGA
• Un puerto 1394a (optativo)
• Cuatro puertos USB
• Un puerto LAN (optativo)
• Clavijas de Audio para micrófono, line-in y line-out de 6/8-canales (opcional)
BIOS Firmware
La placa principal usa AMI BIOS que habilita usuarios para configurar muchas características de
sistema que incluyen las sigtes:
• Administración de Alimentación
• Alarmas para despertar
• Parámetros de CPU
• Cronometraje de CPU y de memoria
También se lo puede usar el firmware para configurar los parámetros para diferentes velocidades
de reloj de procesador.
Multi-Language Translation
Características
Processador
Esta motherboard usa um tipo LGA775 de Intel CoreTM2 Duo/Pentium D/Pentium 4/Celeron
D que possui as seguintes características:
• Acomoda processadores Intel CoreTM2 Duo/Pentium D/Pentium 4/Celeron
D
• Suporta um bus de sistema (FSB) de 1066/800/533 MHz
• Suporta CPU de tecnologia “Hyper Threading”
Tecnologia “Hyper Threading” que permite ao sistema funcionar de forma interligada até
dois processadores, permitindo que os dois fios possam funcionar em paralelo, ambos em
processadores “lógicos” separados dentro do mesmo processador físico.
Conjunto de Chips
Um conjunto de chips P4M900 Northbridge (NB) e VT8237A/VT8237S Southbridge (SB) é
baseado numa arquitectura inovadora e escalável com uma performance comprovadamente
Português
credível.
P4M900 • Suporta modos de transferência 66 MHz, 8X/4X, interface
(NB) Ultra V-Link Host com largura de banda total de 1 GB/seg.
• Suporta até duas portas PCI Express, configurado como uma
x16 e uma x1 via PCI Express
• Gráficos Chrome9 HC 3D/2D Integrados & Controlador de
Vídeo
• Controlador DDR SDRAM e DDR2 Avançado de 64 bits
• Compatível com ACPI 2.0 e Gestão de Bus PCI 1.1
VT8237A • Suporta um interface 66 MHz Ultra V-Link Host de 16 bits
/VT8237S com largura de banda total de 1 GB/seg.
(SB) • Compatível com especificação PCI 2.3 a 33 MHz, suportan-
do mais de 6 PCI mestres
• ATA de Série integrado/ Controladores Host ATA II de Série,
suportando taxas de transferência de dados até 1.5/3.0
Gb/seg. (ATA II de Série com somente VT8237S)
• Canal Duplo Integrado UltraDMA 133/100/66 Modo Mestre
EIDE Controlador
• Controlador USB 2.0, suportando portes para 8 USB 2.0
• Controlador de teclado integrado com suporte para mouse
PS2
Memória
• Suporta DDR2 667/533/400 DDR2 SDRAM DIMMs
• Acomoda duas DDR2 DIMMs sem buffers
• Até 2 GB por DIMM com tamanho de memória máxima de até 4 GB
Áudio
Esta motherboard poderá suportar qualquer um dos seguintes conjuntos de chips Audio:
• Formato 16/20/24-bit PCM com suporte DAC de 8 canais para solução
áudio 7.1
• Todos os ADCs suportam uma Taxa de Amostragem Independente de
48K/192kHz
• Excede os requisitos Microsoft PC2001
• Entrada de CDs de diferencial de alta qualidade
• Três DACs Estéreo que suportam 16/20/24-bits e formato PCM para
solução áudio canal 5.1
• ADCs suportam taxa de amostragem de 44.1k/48k/96k
• Cumpre com os requisitos áudio WHQL/WLP 3.1x da Microsoft audio
• Compatível com Direct Sound 3DTM
Multi-Language Translation
Onboard LAN (opcional)
Esta motherboard poderá suportar qualquer um dos seguintes conjuntos de chips LAN:
• Suporta operação de Auto-negociação N-Way 10/100 Mb/s
• Suporte Wake-on-LAN ( WOL) e wake-up remoto
• Suporta capacidade de duplex pela metade/ou na totalidade
• Suporta operação de Auto-negociação N-Way 10Mb/s e100Mb/s
• Solução de passagem 100Base-TX/10Base-T física com um único chip
• Suporta capacidade de duplex pela metade/ou na totalidade
• Transreceptor integrado 10/100/1000
• Suporta PCI v2.3, 32-bit, 33/66-MHz
• Suporta inteiramente com IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
• Compatível com controlador host de chip único para IEEE 1394-1995 e IEEE1394a-
2000
• PHY integrado de 2 portas de 400 Mb/s para o PCI Bus
• Fonte de alimentação de 3.3V com Entradas Tolerantes de 5V
Opções de Expansão
A motherboard é fornecida com as seguintes opções de expansão:
• Um ranhura PCI Express x16 para Interface de Gráficos
• Uma ranhura PCI Express x1
• Dois ranhuras compatíveis com PCI v2.3 de 32 bits
• Dois conectores de baixo perfil IDE de 40 pinos suportando até 4
dispositivos IDE
• Um interface com drive de disco flexível
• Dois conectores SATA de 7 pin
Esta motherboard suporta um domínio bus UltraDMA bus com taxas de Transferência de
133/100/66 MB/s.
I/O Integrado
A motherboard possui um conjunto completo de portas I/O e conectores:
• Duas portas PS/2 para rato e teclado
• Uma porta de série
• Uma porta paralela
• Uma porta VGA
• Uma porta 1394a (opcional)
• Quatro portas USB
• Uma porta LAN (opcional)
• Fichas áudio para microfone, line-in e line-out de 6/8-canais (opcional)
Microprogramação BIOS
Esta motherboard usa AMI BIOS que permitem aos utilizadores configurar muitas características
do sistema incluindo as seguintes:
• Gestão de corrente
• Alarmes de despertar
• Parâmetros CPU
• Temporização de memória e CPU
A microprogramação poderá ser também usada para estabelecer parâmetros para diferentes
velocidades de relógio do processador.
Multi-Language Translation
機能
プロセッサ
本マザーボードは Intel CoreTM2 Duo/Pentium D/Pentium 4/Celeron D 向けの
LGA775ソケットを採用しており、そのソケットには次の特徴があります:
• Intel CoreTM2 Duo/Pentium D/Pentium 4/Celeron D プロセッサに対応
• 1066/800/533 MHzのシステムバス(FSB)をサポート
• “ハイパースレッド” 技術をサポート
ハイパースレッド(HT) 技術というのは、オペレーションシステムに2つのプロセッサが
存在すると認識させることで、実際には2つのスレッドを1つのプロセッサで同時に執行さ
せ、平行利用を可能とする技術です。
チップセット
P4M900 Northbridge (NB)と VT8237A/VT8237S Southbridge (SB)チップセッ
トは、実証された信頼性と性能を持つ革新的で拡張性のあるアーキテクチャに基づいて
います。
P4M900 • 66 MHz 4Xと8x 転送モードの Ultra V-Link インターフェースで合計1
GB/秒の帯域幅を実現
日本語
(NB)
• 2つのPCI Expressポートをサポートし、x16とx1のPCI Express レ
インの組み合わせに設定
• 統合型 Chrome9HC 3D/2D Graphics & Video コントローラを搭
載
• 高度な64ビットDDR2 およびDDR SDRAM コントローラ
• “ACPI 2.0 and PCI Bus Management 1.1”規格に対応
VT8237A/ • 16ビット66 MHzのUltra V-Link ホストインターフェースで1 GB/
VT8237S 秒の帯域幅を提供
(SB) • 33MHzでのPCI 2.3規格に準拠し、最大6つまでのPCIマスター装
置の取り付け可
• シリアルATA/ シリアルATA II ホストコントローラを内蔵済
みで、データ転送率を最大1.5/3.0 Gb/秒 (シリアルATA II は
VT8237Sの場合のみ)まで実現
• 内蔵式のデュアルチャネルUltraDMA133/100/66マスターモード
EIDEコントローラ
• USB2.0仕様コントローラ(8つのUSB2.0仕様のポートに対応)
• PS2マウス対応のキーボードコントローラを内蔵
メモリ
• DDR2 667/533/400 DDR2 SDRAM DIMMをサポート
• 2つの非バッファー DDR2 DIMMを搭載可
• 各DIMMスロットに2 GBまで装着可能で、合計4 GBまでサポート
オーディオ
当マザーボードは次のオーディオチップセットのいずれかを搭載しております:
• 8チャネルのDACで、 7.1オーディオソリューションの16/20/24-bit PCM形
式をサポート
• すべてのADCで、48K/192kHzの独立サンプリングレートが可能
• Microsoft PC2001規格要求またはそれ以上対応
• 高品位の差動アナログCD入力
• 5.1チャネル・オーディオ・ソリューションの16/20/24ビットPCM形式に対応するス
テレオDACが3つ
• ADCでは44.1k/48k/96kのサンプリング・レートをサポート
• Microsoft WHQL/WLP 3.1x オーディオ要求に適合
• Direct Sound 3DTM に対応
Multi-Language Translation
オンボードLAN
オンボードLANコントローラで次のいずれかの機能を提供します:
• 10/100 Mb/s N-way自動ネゴシエーション動作をサポート
• Wake-on-LAN(WOL)およびリモート起動の機能をサポート
• 半/全二重の機能をサポート
• 10Mb/s と 100Mb/s N-way自動ネゴシエーション動作をサポート
• シングルチップ100Base-TX/10Base-T 物理層ソリューションを採用
• 半/全二重の機能をサポート
• 10/100/1000 トランシーバーを搭載済み
• PCI v2.3, 32-bit, 33/66MHzに対応
• IEEE 802.3、IEEE 802.3u、IEEE 802.3abに全面対応
拡張オプション
本マザーボードでは、次の拡張機能が利用できます。
• グラフィック用のPCI Express x16 スロット が1つ
• PCI Express x1 スロットが1つ
• 32ビットPCI v2.3 互換性スロットが2つ
• 40ピンIDEコネクタが2つ(計4つまでのIDE装置の接続可)
• フロッピーディスクドライブインターフェイス が1つ
• 7ピンSATAコネクタ が2つ
このマザーボードは、133/100/66 MB/秒の転送速度でのUltra DMAバスマスタリングをサポ
ートします。
統合の入出力ポート
マザーボードには、次のI/Oポートやコネクタを揃えています。
• マウスとキーボード用のPS/2ポート が2つ
• シリアルポート が1つ
• パラレルポート が1つ
• VGAポート が1つ
• 1394aポート が1つ(オプション)
• USBポート が4つ
• LANポート が1つ(オプション)
• マイクロホン、ライン入力、6/8チャネル(オプション)ライン出力のオーディオ
ジャック
BIOSファームウェア
本マザーボードはAMI BIOSを採用し、次の機能を含む多様なシステムの構成ををサポ
ートします。
• 電源管理
• ウェークアップアラーム
• CPUパラメータ
• CPUとメモリとのタイミング
さらに、所定のパラメータを設定することによって、プロセッサのクロック速度を変更す
ることもできます。
一部のハードウェア仕様とソフトウェアアイテムは、予告なしに変更すること
があります。
Multi-Language Translation
특성
프로세서
본 마더보드는 LGA775 타입 Intel CoreTM2 Duo/Pentium D/Pentium 4/Celeron D
를 사용하며 다음과 같은 특성을 지닌다:
• Intel CoreTM2 Duo/Pentium D/Pentium 4/Celeron D 프로세서 사용
• 1066/800/533 MHz 의 시스템 버스 (FSB) 지원
• "Hyper-Threading" 기술의 CPU 지원
"Hyper-Threading" 기술은 운영 체제가 두개의 프로세서에 연결되어 있는 것처럼,
두 트래드가 동일한 물리적 프로세서 안에 있으면서도 각기 다른 "논리적" 프로세서에
서 패러럴로 실행되게 한다.
칩셋
P4M900 Northbridge (NB) 및 VT8237A/VT8237S Southbridge (SB) 칩셋은 혁신적
이고 확장성을 지닌 아키텍처를 기반으로 확인된 안정성과 성능을 제공한다.
P4M900 • 66 MHz, 8X/4X 전송 모드, UltraV-Link 호스트 인터페이
(NB) 스 총 대역폭 1 GB/s 지원
• 최대 2 개의 PCI Express 포트 지원(x16 + PCI Express
lane)
• 통합 Chrome9 HC 3D/2D 그래픽 및 비디오 컨트롤러
한국어
• 고급 64 비트 DDR2/DDR SDRAM 컨트롤러
• ACPI 2.0 및 PCI Bus Management 1.1 부합
VT8237A/ • 16 비트 66 MHz Ultra V-Link 호스트 인터페이스 총 대역
VT8237S 폭 1 GB/s 지원
(SB) • 33 MHz에서 PCI 2.3 사양 호환, 최대 6 PCI 마스터 지원
• 통합 Serial ATA/ Serial ATA II 호스트 컨트롤러, 데이터
전송 속도 최대 1.5/3.0 Gb/s (VT8237S 탑재 Serial ATA
II 만 해당) 지원
• 통합 듀얼 채널 UltraDMA 133/100/66 마스터 모드 EIDE
컨트롤러
• USB 2.0 컨트롤러, 8 USB 2.0 포트 지원
• PS2 마우스 지원 통합 키보드 컨트롤러
메모리
• DDR2 667/533/400 DDR2 SDRAM DIMM 지원
• 2 개의 DDR2 unbuffered DIMM 사용
• DIMM 당 최대 2 GB, 최대 메모리 4 GB
오디오
본 마더보드는 다음과 같은 오디오 칩셋을 지원합니다:
• 8 채널 DAC, 7.1 오디오 솔루션을 위해 16/20/24 비트 PCM 포맷 지원
• 모든 ADC의 48K/192kHz 독립적 샘플 속도 지원
• Microsoft PC2001 요구사항 부합
• 고품질 아 차별적 CD 입력
• 3 개의 스테레오 DAC`로 5.1 채널 오디오 솔루션을 위한 16/20/24 비트 PCM
포맷 지원
• ADCs 44.1k/48k/96k 샘플 속도 지원
• 마이크로소프트 WHQL/WLP 3.1x 오디오 요구 조건 부합
• Direct Sound 3DTM 호환
Multi-Language Translation
보드 내장 LAN (선택 사항)
보드 내장 LAN 컨트롤러는 다음과 같은 특징을 제공한다:
• 10/100 Mb/s N-Way Auto-negotiation 작업 지원
• Wake-on-LAN 및 원격 wake-up 지원
• Half/full 듀플렉스 지원
• 10Mb/s 및 100Mb/s N-Way Auto-negotiation 작업 지원
• 싱글 칩 100Base-TX/10Base-T 물리적 계층 솔루션
• Half/full 듀플렉스 지원
• 통합 10/100/1000 트랜시버
• PCI v2.3, 32-bit, 33/66-MHz 지원
• IEEE 802.3, IEEE 802.3u, IEEE 802.3ab 전적으로 지원
확장 옵션
한국어
통합 I/O
본 마더보드는 풀 셋트의 I/O 포트 및 커넥터가 있다:
• 마우스 및 키보드용 PS/2 포트 2 개
• 시리얼 포트 1 개
• 패러럴 포트 1 개
• VGA 포트 1 개
• 1394 a 포트 1 개 (선택 사항)
• USB 포트 4 개
• LAN 포트 1 개 (선택 사항)
• 오디오 잭 (마이크, 라인 입력 및 6/8 채널 (옵션) 라인 출력용)
BIOS 펌웨어
본 마더보드는 다음과 같은 시스템 특성을 구성할 수 있는 AMI BIOS 를 사용한다:
• 전원 관리
• Wake-up 알람
• CPU 파라미터
• CPU 및 메모리 타이밍
펌웨어로 다른 프로세서 클록 속도의 파라미터를 설정할 수도 있다.
晶片組
P4M900 北橋(NB)及VT8237A/VT8237S 南橋(SB)晶片組在研發設計上採用了創新且具擴
充性之架構,具備優良的可靠性及性能。
P4M900 • 支援66 MHz之4X及8X傳輸模式的Ultra V-Link介面,提供合計
(NB) 高達1 GB/秒的頻寬
• 支援兩個PCI Express插槽,組態設定一個x16 及一個x1 PCI
Express 通道
• 整合型 Chrome9 HC 3D/2D 繪圖暨音訊控制器
• 先進之64位元 DDR2 及 DDR SDRAM 控制器
• 相容於ACPI 2.0暨PCI 匯流排管理第1.1版規格
VT8237A/
繁體中文
• 支援 16位元、66 MHz的Ultra V-Link 主控介面,總頻寬高
VT8237S 達1GB/秒
(SB) • 相容於33MHz的PCI v2.3規格(支援6個PCI主控器)
• 內建串列ATA/串列ATA II 主控器,支援資料傳輸率高達
1.5/3.0 Gb/秒 (串列ATA II僅適用於VT8237S的情況)
• 內建有雙通道Ultra 133/100/66主控模式EIDE控制器
• USB2.0控制器(支援8個USB2.0埠)
• 內建有支援PS2滑鼠之鍵盤控制器
記憶體
• 支援 DDR2 667/533/400 DDR2 SDRAM 雙直列記憶體模組
• 可安裝2個DDR2非緩衝式雙直列記憶體模組
• 各插槽可安裝2 GB記憶體,共可支援高達4 GB的記憶體容量
音效
本主機板搭載有如下音效晶片組:
• 配備8通道之DAC,可支援 7.1音訊解決方案之16/20/24-位元PCM 格式
• 所有ADC支援 48K/192kHz 獨立取樣率
• 符合並超越Microsoft PC2001規格要求
• 高品質類比微分CD 輸入
• 3個立體聲數位類比轉換器(DAC),支援5.1聲道音效解決方案的
16/20/24位元PCM格式
• 類比數位轉換器(ADC)支援44.1k/48k/96k的取樣率
• Microsoft WHQL/WLP 3.1x 音效規格相容
• Direct Sound 3DTM 相容
Multi-Language Translation
內建區域網路
本主機板搭載有如下其中一種LAN晶片組:
• 支援 10Mb/s 及100Mb/s N-way 自動協調運作
• 支援區域網路喚醒(WOL)及遠端喚醒功能
• 支援半/全雙工功能
• 支援 10Mb/s 及100Mb/s N-way 自動協調作業
• 採用單晶片100Base-TX/10Base-T 實體層解決方案
• 支援半/全雙工功能
• 整合有10/100/1000 收發器
• 支援PCI v2.3, 32位元, 33/66 MHz
• 完全支援IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
擴充選項
本主機板包括下列擴充選項:
• 1個繪圖卡用PCI Express x16 介面
• 1個PCI Express x1 插槽
• 2個32位元PCIv2.3插槽
繁體中文
• 2個40針IDE低通連接器,可連接4個 IDE裝置
• 1個軟碟機介面
• 2個7針SATA插頭
本主機板支援傳輸率133/100/66 MB/秒下的Ultra DMA 匯流排主控功能。
整合 I/O
主機板具有一組齊全的 I/O 連接埠及連接頭:
• 2 個 PS/2 埠,供滑鼠與鍵盤使用
• 1 個串列埠
• 1 個平行埠
• 1 個VGA埠
• 1 個1394a埠(選購)
• 4 個USB埠
• 1 個區域網路埠(選購)
• 具有麥克風、Line級輸入及6/8聲道(選項)Line級輸出的音訊端子
BIOS 韌體
本主機板使用AMI BIOS,使用者可以組態設定許多系統功能,包括如下:
• 電源管理
• 喚醒警鈴
• CPU參數
• CPU及記憶體的時脈定時
此外,也可藉由參數的設定,調整處理器的時脈速度。
部份硬體規格和軟體內容可能會在未經通知的情況下更動,敬請見諒。
Multi-Language Translation
功能
处理器
此主板使用 LGA775 型 Intel CoreTM2 Duo/Pentium D/Pentium 4/Celeron D CPU,具
备以下特点
• 支持 Intel CoreTM2 Duo/Pentium D/Pentium 4/Celeron D 处理器
• 支持 1066/800/533 MHz 系统总线 (FSB)
• 支持“多线程”技术 CPU
“多线程”技术可以让操作系统认为自己连接了两个处理器,允许两个线程并行运
行,每个线程位于同一处理器中的单独“逻辑”处理器中。
芯片组
P4M900 北桥 (NB) 和 VT8237A/VT8237S 南桥 (SB) 芯片组是基于一种新型的、可
扩展的架构,能提供已经证明的可靠性和高性能。
P4M900 • 支持 66 MHz 4x 和 8x 传输模式,支持 Ultra V-Link 接口,
(NB) 总带宽可达 1GB/s
• 支持 2 个 PCI Express 端口,配置为一个 x16 和一个 x1 PCI
Express lane
• 集成 Chrome9 HC 3D/2D 图形 & 视频控制器
• 增强 64 位 DDR2 和 DDR SDRAM 控制器
• 符合 ACPI 2.0 和 PCI 总线管理 1.1 规格
VT8237A/ • 支持 16 位 66 MHz、Ultra V-Link 主机接口,1 GB/sec 总
VT8237S 带宽
(SB) • 符合 33 MHz 下的 PCI 2.3 规格,最大支持 6 个 PCI 主控
• 集成 Serial ATA/ Serial ATA II 主机控制器,支持 1.5/3.0
简体中文
Gb/s 数据传输速率(Serial ATA II 仅适用于 VT8237S时)
• 集成双通道 UltraDMA 133/100/66 主控模式 EIDE 控制器
• USB 2.0 控制器,支持8 个 USB 2.0 端口网络控制器
• 集成支持 PS2 鼠标的键盘控制器
内存
• 支持 DDR2 667/533/400 DDR2 SDRAM DIMM
• 支持 2 个 DDR2 非缓冲 DIMM
• 每个插槽支持 2 GB,总共最大可支持 4 GB
音频
此主板支持以下音频芯片组:
• 8 通道 DAC,支持 16/20/24 位 PCM 格式用于 7.1 音频解决方案
• 所有 ADC 支持 48K/192kHz 独立采样速率
• 超过 Microsoft PC2001 要求
• 高质量模拟量差分 CD 输入
• 3 个立体声 DAC,支持 16/20/24 位 PCM 格式用于 5.1 声道音频解决方
案
• ADC 支持 44.1k/48k/96k 采样速率
• 符合 Microsoft WHQL/WLP 3.1x 音频要求
• 符合 Direct Sound 3DTM 规格
Multi-Language Translation
Onboard LAN
此主板支持以下任何一种 LAN 芯片组:
• 支持 10Mb/s 和 100Mb/s N 路自协商工作
• 支持 LAN 唤醒(WOL)功能和远程唤醒功能
• 支持半双工/全双工工作
• 支持 10Mb/s 和 100Mb/s N 路自协商工作
• 单芯片 100Base-TX/10Base-T 物理层解决方案
• 支持半双工/全双工工作
• 集成 10/100/1000 收发器
• 支持 PCI v2.3,32-位,33/66-MHz
• 完全支持 IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
1394a 火线(可选)
• 符合用于 IEEE1394-1995 和 IEEE1394a-2000 的单芯片 PCI 主机控制器标准
• 集成用于 PCI 总线的 400 Mbit 2 端口 PHY
• 3.3V 电源,带 5V 容错输入
扩展选项
此主板提供如下扩展选项:
• 1 个用于图形接口的 PCI Express x16 插槽
• 1 个 PCI Express x1 插槽
• 2 个 32 位 PCI v2.3 扩展插槽
• 2 个 40-pin IDE 接口,支持 4 个 IDE 设备
• 1 个软驱接口
简体中文
• 2 个 7-pin SATA 接口
主板支持 Ultra DMA 总线控制,传输速率可达 133/100/66MB/s。
集成 I/O
此主板具有完整的 I/O 端口和插孔:
• 2 个用于连接鼠标和键盘的 PS/2 端口
• 1 个串口
• 1 个并口
• 1 个 VGA 端口
• 1 个 1394a 端口(可选)
• 4 个 USB 端口
• 1 个 LAN 端口(可选)
• 麦克风、线入和 6/8 通道(可选)线出声音插孔
BIOS
此主板使用 AMI BIOS,可以让用户自己配置以下系统功能:
• 电源管理
• 唤醒报警
• CPU 参数
• CPU 和记忆定时
还可用于设置不同处理器时钟速度的参数。.
某些硬件规格和软件项目若有更改恕不另行通知。
Multi-Language Translation
Характеристики
Процессор
Материнская плата построена на базе процессора Intel CoreTM2 Duo/Pentium D/Pentium
4/Celeron D типа LGA775 и обладает следующими характеристиками:
• Размещает процессоры Intel CoreTM2 Duo/Pentium D/Pentium 4/Celeron D
• Поддерживает системные шины (FSB) с частотой 1066/800/533 MHz
• Поддерживает технологию CPU “Hyper-Threading”
Технология “Hyper-Threading” «убеждает» операционную систему в том, что в машине
имеется два процессора; это позволяет параллельно обслуживать два процесса, причем
каждый из процессов обслуживается отдельным «логическим» процессором в пределах
одного физического процессора.
Чипсет
Северный мостик P4M900 (NB) и южный мостик VT8237A/VT8237S (SB) чипсета
построены с использованием инновационной масштабируемой архитектуры,
характеризующейся доказанными надежностью и эффективностью.
P4M900 • Поддержка режимов работы 66 MГц, 4X/8X, интерфейс
хоста Ultra V-Link с общей пропускной способностью 1GБ/с
(NB) • Поддерживает два порта PCI Express,
сконфигурированные как x16 и x1 PCI Express
• Встроенный контроллер графики и видео Chrome9 HC
3D/2D
• Усовершенствованный контроллер 64-бит DDR2/DDR
SDRAM
• Совместимо с ACPI 2.0 и PCI Bus Management 1.1
VT8237A • Поддержка интерфейса 16-бит 66 MГц Ultra V-Link с общей
пропускной способностью 1ГБ/сек
/VT8237S • Совместима со спецификацией PCI 2.3 33 MHz,
(SB) поддерживает до 6 PCI устройств типа master
• Встроенные контроллеры хоста Serial ATA/ Serial ATA II,
поддержка скорости трансфера данных до 1,5/3,0 Гб/с
(только Serial ATA II с VT8237S)
Русский
• Встроенный двухканальный контроллер UltraDMA
133/100/66 Master Mode EIDE
• Контроллер USB 2.0, поддержка до портов 8 USB 2.0
• Интегрированный контроллер клавиатуры с поддержкой
мыши PS2
Память
• Поддержка модулей памяти DDR2 667/533/400 DDR2 SDRAM DIMM
• Обслуживает 2 DDR2 модуля небуферизованной памяти DIMM
• Обслуживает до 2 ГБ на модуль DIMM (максимально до 4 ГБ памяти)
Аудио
Встроенный сетевой адаптер Aудио обладает следующими характеристиками:
• Поддерживает 8-канальный DAC в 16/20/24-битном PCM формате
для аудио вер. 7.1
• Все ADC поддерживают независимую скорость сэмплинга 48K/192
кГц
• Соответствует требованиям Microsoft PC2001
• Высококачественный дифференциальный вход CD
• Поддержка трех стерео-DAC 16/20/24-бит PCM для 5.1 аудио
• Поддержка ADC со скоростью сэмплинга 44.1k/48k/96k
• Соответствует требованиям Microsoft WHQL/WLP 3.1x аудио
• Совместимость с Direct Sound 3DTM
Multi-Language Translation
Встроенный сетевой адаптер LAN (Опционально)
Встроенный сетевой адаптер LAN обладает следующими характеристиками:
• Поддерживает автоматическое определение скорости и режима соединения
10/100 Mb/s
• Функция Wake-on-LAN и удаленного пробуждения
• Поддержка режимов Half и Full Duplex
• Поддерживает автоматическое определение скорости и режима соединения
10Mb/s и 100Mb/s
• Одночипное решение физического слоя 100Base-TX/10Base-T
• Поддержка режимов Half и Full Duplex
• Интегрированный трансивер 10/100/1000
• Поддеркжа PCI v2.3, 32-бит, 33/66-MГц
• Полная совместимость с технологией IEEE 802.3, IEEE 802.3u, IEEE
802.3ab
Возможности расширения
Существуют следуюшие опции расширения данной материнской платы:
• Один разъем для карты графики PCI Express x16
• Один слот PCI Express x1
• Два 32-битных слота PCI v2.3
• Два 40-штырьковых низкопрофильных разъема IDE с поддержкой до
4 устройств IDE
• Один разъем для накопителя на гибких дисках
• Два разъема 7-pin SATA
Плата поддерживает технологию захвата управления шиной UltraDMA bus mastering со
Русский
Интегрированный вход/выход
Плата снабжена полным набором портов входа/выхода и разъемов:
• Два порта PS/2 для подключения мыши и клавиатуры
• Один серийный порт
• Один параллельный порт
• Один порт VGA
• Один порт 1394a (опционально)
• Четыре портa USB
• Один порт LAN (опционально)
• Гнезда аудиo для микрофона, входа и 6/8-канального (опционально)
выхода
BIOS
Плата работает под AMI BIOS, который позволяет пользователю конфигурировать различные
характеристики системы:
• Управление питанием
• Сигналы пробуждения системы
• Параметры CPU
• Время доступа для CPU и памяти
BIOS допускает также установку параметров для различных частот процессора.
Multi-Language Translation
Cechy
Procesor
Płyta główna obsługuje procesory Intel CoreTM2 Duo/Pentium D/Pentium 4/Celeron D typu
LGA775 i posiada następujące właściwości:
• Przystosowana do obsługi procesorów Intel CoreTM2 Duo/Pentium D/
Pentium 4/Celeron D
• Obsługuje szynę systemowa (FSB) 1066/800/533 MHz
• Zabezpiecza technologię CPU “Hyper-Threading”
Technologia “Hyper-Threading” powoduje, że system "myśli”, że posiada dwa procesory
i wykonuje równolegle dwa procesy; za wykonanie każdego procesu odpowiedzialny jest
jeden z dwuch "logicznych" procesorów w ramach jednego fizycznego procesora
Chipset
Mostek północny (NB) P4M900 i mostek południowy VT8237A/VT8237S chipsetu są
zbudowane w oparciu o innowacyjną architekturę skalowalną o potwierdzonej niezawodności
i solidnym wykonaniu.
P4M900 • Obsługuje 66 MHz tryby przesyłania 8X/4X, interfejs hosta
Ultra V-Link o całkowitej przepustowości 1 GB/s
(NB) • Obsługuje do dwu portów PCI Express, z których jeden jest
skonfigurowany jako PCI Express x16, a drugi jako PCI
Express x1
• Zintegrowany kontroler grafiki i video Chrome9 HC 3D/2D
• Zaawansowany kontroler 64-bitowy DDR2/DDR SDRAM
• Zgodne z ACPI 2.0 oraz PCI Bus Management 1.1
VT8237A/ • Obsługuje 16 bitowy, 66 MHz interfejs hosta Ultra V-Link o
całkowitej przepustowości 1 GB/s
VT8237S • Zgodny ze standardem PCI w wersji 2.3 o częstotliwości
(SB) 33 MHz, obsługuje do 6 urządzeń PCI typu master.
• Zintegrowane kontrolery Serial ATA/ Serial ATA II zapewniające
szybkości przesyłania do 1,5/3,0 Gb/s (tylko Serial ATA II z
VT8237S)
• Zintegrowany dwukanałowy kontroler UltraDMA 133/100/66
w trybie Master EIDE
• Kontroler USB 2.0, obsługujący do 8 gniazd USB 2.0
• Zintegrowany kontroler klawiatury z obsługą myszy PS2
Polski
Pamięć
• Obsługuje banki pamięci DDR2 533/400 DDR2 SDRAM DIMM
• Zaopatrzony w dwa gniazda niebuforowanej pamięci typu DDR2 DIMM
• Obsługuje pamięć DIMM do pojemności 2 GB każda; maksymalna
możliwa pojemność pamięci do 4 GB
Audio
Zintegrowana obsługa sieci Audio posiada następujące właściwości:
• Obsługuje 8 kanałów DAC w formacie 16/20/24-bit PCM w standardzie audio
7.1
• Wszystkie ADC obsługują niezależną częstotliwość próbkowania w zakresie
48K - 192kHz
• Spełnia wymogi Microsoft PC2001
• Wysokiej jakości wejście różnicowe CD
• Obsługuje trzy Stereo DAC16/20/24-bit PCM format dla 5.1 audio
kanałowego
• Obsługuje ADC o szybkości próbkowania 44.1k/48k/96k
• Spełnia wymagania stawiane audio przez firmę Microsoft w systemie WHQL/
WLP 3.1x
• Zgodny z Direct Sound 3DTM
Multi-Language Translation
Zintegrowana obsługa sieci LAN (opcjonalnie)
Zintegrowana obsługa sieci LAN posiada następujące właściwości:
Możliwości rozbudowy
Płyta głwna wyposażona jest w następujące gniazda:
• Jedno gniazdo PCI Express x16 dla karty graficznej
• Jedno gniazdo PCI Express x1
• Dwa 32-bitowych gniazda zgodnych z PCI w wersji 2.3
• Dwa 40-nóżkowe złącza niskoprofilowe IDE obsługujące do 4 urządzeń IDE
• Jedno złącze obsługujące stacje dyskietek
• Dwa 7-nóżkowe złącza SATA
Płyta główna obsługuje szynę UltraDMA z szybkością transferu 133/100/66 MB/s.
Zintegrowane We/Wy
Płyta głwna wyposażona jest w pełny zestaw gniazd i złączy We/Wy:
• Dwa gniazda PS/2 dla myszy i klawiatury
• Jedno gniazdo szeregowe
• Jedno gniazdo równoległe
Polski
Firmowy BIOS
Płyta głwna wyposażona jest w BIOS firmy AMI, który pozwala użytkownikowi konfigurować
wiele cech systemu włączając w to następujące właściwości:
• Zarządzanie poborem mocy
• Alarmy typu Wake-up
• Parametry pracy procesora
• Ustalenia szybkoœci pracy procesora i pamiêci
BIOS może być używany do ustalania parametrów wpływających na szybkości pracy zegara
procesora.
Multi-Language Translation
Vlastnosti
Procesor
Tato základní deska je určena pro procesory Intel CoreTM2 Duo/Pentium D/Pentium 4/Celeron
D LGA775 a může nabídnout následující vlastnosti:
• Použití pro procesory Intel CoreTM2 Duo/Pentium D/Pentium 4/Celeron D s
jádrem
• Podporuje taktování systémové sběrnice (FSB) na frekvenci 1066/800/533
MHz
• Podporuje technologii CPU „Hyper-Threading“
Technologie „Hyper-Threading“ umožňuje operačnímu systému pracovat tak, jako by byl
připojen ke dvěma procesorům, protože je možné pracovat se dvěma toky programového
kódu (vlákny) paralelně najednou, přičemž jsou k dispozici samostatné „logické“ procesory
umístěné v rámci jednoho fyzického procesoru.
Čipová sada
Čipy northbridge (NB) P4M900 a southbridge (SB) VT8237A/VT8237S jsou založeny na
inovativní a škálovatelné architektuře s ověřenou spolehlivostí a výkonností.
P4M900 • Podpora hostitelského rozhraní 66 MHz, přenosové režimy 4x/8x,
(NB) Ultra V-Link s celkovou šířkou pásma 1 GB/s
• Podporuje až dva sloty PCI Express, konfigurované jako jedna
trasa x16 a jedna trasa x1 PCI Express
• Integrovaný řadič grafiky a videa Chrome9 HC 3D/2D
• Moderní 64bitový řadič pamětí DDR2 a DDR SDRAM
• Slučitelné s ACPI 2.0 a PCI Bus Management 1.1
VT8237A • Podpora rozhraní Ultra V–Link 16bit 66 MHz s celkovou
/VT8237S šířkou pásma 1 GB/s
(SB) • Splňuje specifikace standardu PCI 2.3 s frekvencí 33 MHz,
podporující až 6 hlavních kanálů PCI
• Integrované řadiče Serial ATA/ Serial ATA II, podpora rychlosti
přenosu dat až 1,5/3,0 Gb/s (jen řadič Serial ATA II s čipem
VT8237S)
• Integrovaný dvoukanálový řadič UltraDMA133/100/66 EIDE
v řídícím režimu.
• Řadič USB 2.0, podporujíc 8 portů USB 2.0
• Integrovaný řadič klávesnice s podporou myši PS2
Paměť
• Podpora paměťových modulů DDR2 667/533/400 DDR2 SDRAM DIMM
• Instalovat je možné až dvě DDR2 DIMM moduly bez vyrovnávací pamìti Česky
• Až 2 GB paměti na jeden modul DIMM s maximální velikostí paměti do 4
GB
Zvukový
Vestavěné síťové rozhraní zvukový nabízí následující možnosti:
Multi-Language Translation
Vestavění síťové rozhraní LAN (volitelně)
Vestavěné síťové rozhraní LAN nabízí následující možnosti:
• Podpora 10/100 Mb/s N–cestného automatického přepínání provozu
• Podpora funkce Wake–on–LAN ( WOL) a vzdálené aktivace
• Poloviční a plný duplex
• Podpora 10Mb/s a 100Mb/s N–cestného automatického přepínání
provozu
• Jeden čip fyzické síťové vrstvy 100Base-TX/10Base-T
• Poloviční a plný duplex
• Integrovaný transceiver 10/100/1000
• Podpora rozhraní PCI v2.3, 32bitové, 33/66MHz
• Plná podpora rozhraní IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
Možnosti rozšíření
Základní deska je dodávána s následujícími možnostmi rozšíření
• Jedna patice PCI Express x16 pro grafickou kartu
• Jedna patice PCI Express x1
• Dva 32bitové patice PCI v2.3
• Dva nízkoprofilové 40kolíkové konektory IDE podporující připojení 4
zařízení standardu IDE
• Jedno rozraní pro disketovou mechaniku
• Dva 7kolíkové konektor SATA
Základní deska podporuje sběrnici Ultra DMA s přenosovými rychlostmi 133/100/66 MB/s.
Integrovaný vstup/výstup
Základní deska je vybavena kompletní sadou vstupních portů a konektorů I/O:
• Dva porty PS/2 pro myš a klávesnici
• Jeden sériový port
• Jeden paralelní port
• Jeden port VGA
• Jeden port LAN (volitelně)
• Čtyři porty USB
Česky
Firmware BIOS
Základní deska využívá BIOS formy AMI, který uživateli umožňuje nakonfigurovat mnoho
systémových parametrů, včetně následujících:
• Řízení spotřeby
• Alarmy při spouštění systému
• Parametry CPU
• Časování CPU a paměti
Firmware může být rovněž použit k nastavení parametrů pro různé taktovací frekvence
procesoru.
Některé technické parametry hardware a software se mohou měnit bez
předchozího upozornění.
Multi-Language Translation
Caracteristici
Procesorul
Această placă de bază utilizează un Intel CoreTM2 Duo/Pentium D/Pentium 4/Celeron D de
tip LGA775 cu următoarele caracteristici:
• Funcţionează cu procesoare Intel CoreTM2 Duo/Pentium D/Pentium 4/
Celeron D
• Funcţionează cu bus sistem (FSB) de 1066/800/533 MHz
• Este compatibilă cu unităţi centrale dotate cu tehnologia „Hyper-
Threading”
Tehnologia „Hyper-Threading” permite sistemului de operare să funcţioneze ca şi cum
ar exista două procesoare, putând fi rulate în paralel două fire, fiecare pe câte un procesor
„logic” separat, aflate pe acelaşi procesor fizic.
Setul de chipuri
Chipsetul P4M900 Northbridge (NB) şi VT8237A/VT8237S Southbridge (SB) se bazează pe
o arhitectură inovatoare şi dezvoltată cu fiabilitate şi performanţă demonstrate.
P4M900 • suport pentru moduri de transfer 66 MHz, 4x/8x, interfaţă
(NB) Ultra V-Link Host cu lăţime de bandă totală de 1 GB/s
• Suportă până la două porturi PCI Express, configurat ca şi
un x16 şi unu x1 PCI LANE-uri Express
• Controller grafică & video Chrome9 HC 3D/2D integrat
• Controller 64-bit DDR2/DDR SDRAM avansat
• Compatibil cu ACPI 2.0 şi PCI Bus Management 1.1
VT8237A/ • suport pentru interfaţă 16-bit 66 MHz Ultra V-Link Host cu
VT8237S lăţime de bandă totală de 1 GB/s
(SB) • Compatibil cu specificaţia PCI, versiunea 2.3 33MHz, care
suportă cel mult 6 module PCI master
• Serial ATA/ Serial ATA II Host Controller-uri integrate, care
suportă rate de transferuri de dată de până la 1.5/3.0 Gb/s
(Serial ATA II cu VT8237S numai)
• Controler EIDE UltraDMA 133/100/66 Master Mode
integrat cu canal dual
• Controler USB 2.0 care suportă 8 porturi USB 2.0
• Controler de tastatură cu suport pentru mouse PS/2
Memoria
• Suport pentru DIMM-uri DDR2 667/533/400 DDR2 SDRAM
• Poate funcţiona cu două module DDR2 DIMM fără zonă tampon
• Poate funcţiona cu module DIMM de cel mult 2 GB, iar cantitatea maximă
de memorie este de 4 GB
Audio
Setul de chipuri audio are următoarele caracteristici:
Română
• Suport DAC 8 canale format PCM 16/20/24-bit pentru soluţii audio 7.1
• Toate ADC-urile suportă 48K/192kHz Independent Sample Rate
• Excede Cerinţele Microsoft PC2001
• input CD diferenţial înaltă calitate
• Trei DAC-uri stereo 16/20/24-bit format PCM pentru soluţie audio 5.1
canale
• Suport ADC-uri la viteză de eşantionare 44.1k/48k/96k
• Corespunde cerinţelor audio Microsoft WHQL/WLP 3.1x
• Compatibil cu Direct Sound 3DTM
Multi-Language Translation
Onboard LAN (opţional)
Onboard LAN are următoarele caracteristici:
• Suportă operaţii de autonegociere N-way de 10/100 Mb/s
• Suport pentru funcţiile Wake-on-LAN ( WOL) şi trezire la distanţă
• Posibilitate semi-duplex şi duplex complet
• Suportă operaţii de autonegociere N-way de 10Mb/s şi 100 Mb/s
• Soluţie cu start fizic cu un singur cip 100Base-TX/10Base-T physical
layer solution
• Posibilitate semi-duplex şi duplex complet
• Unitate de emisie/recepţie 10/100/1000 integrat
• Suportă PCI, versiunea 2.3, de 32 biţi, la 33/66 MHz
• compatibil pe deplin cu standardul IEEE 802.3, IEEE 802.3u, IEEE
802.3ab
Opţiuni de extindere
Placa de bază este dotată următoarele posibilităţi de extindere:
• Un slot PCI Express de 16x pentru interfaţa grafică
• Un slot PCI Express x1
• Două sloturi de 32 biţi compatibile PCI, versiunea 2.3
• Două socluri IDE plate de 40 de ace care suportă cel mult patru unităţi
IDE
• O interfaţă pentru unitate floppy
• Două conectoare SATA plate de 7
Placa de bază suportă bus mastering UltraDMA cu viteze de transfer de 133/100/66 MB/s
I/O integrată
Placa de bază este dotată cu un set complet de porturi şi conectoare I/O:
• Două porturi PS/2, pentru mouse şi tastatură
• Un port serial
• Un port paralel
• Un port VGA
• Un port 1394a (opţional)
• Patru porturi USB
• Un port LAN (opţional)
• Fişă audio pentru microfon, priză de intrare şi priză de ieşire 6/8-canale
(opţional)
Română
Firmware BIOS
Placa de bază utilizează AMI BIOS, care permite utilizatorului să configureze mai mulţi
parametri ai sistemului, cum ar fi:
• Gestionarea energiei
• Alarme de trezire
• Parametri CPU
• Temporizare CPU şi memorie
Acest firmware poate fi utilizat şi pentru a seta parametrii diferitelor frecvenţe de comandă
ale procesorului.
Anumite specificaţii hardware şi elemente de software pot fi modificate fără
înştiinţare prealabilă.
Multi-Language Translation
Спецификация
Процесор
Тази дънна платка използва сокет LGA775 за процесори Intel CoreTM2 Duo/Pentium D/
Pentium 4/Celeron D със следните характеристики:
• поддръжка на процесори Intel CoreTM2 Duo/Pentium D/Pentium 4/
Celeron D
• поддръжка на системна шина със скорост 1066/800/533 MHz
• поддръжка на процесори с технология “Hyper-Threading"
Технологията “Hyper-Threading" позволява да се “излъже” операционната система, че
работи на два процесора, което дава възможност за паралелното изпълнение на две
задачи на два отделни “логически” процесора в един и същ физически процесор.
Чипсет
Чипсетът със северен мост P4M900 и южен мост VT8237A/VT8237S е с иновационна и
разширяема архитектура с доказана надеждност и производителност.
P4M900 • поддръжка на режими на трансфер 66 MHz, 4x/8x, Ultra
(NB) V-Link интерфейс с обща предавателна лента 1GB/s
• Поддръжка до два PCI Express порта (един х16 и един
х1)
• Интегриран графичен и видео контролер Chrome9 HC
3D/2D
• Усъвършенстван 64-битов DDR2/DDR SDRAM контролер
• Съвместимост с ACPI 2.0 и PCI Bus Management 1.1
VT8237A • Поддръжка на 16-битов Ultra V-Link Host интерфейс, 66
/VT8237S MHz, с обща пропускателна способност 1 GB/sec
(SB) • Съвместимост със спецификацията PCI 2.3 при 33 MHz,
с поддръжка на до 6 PCI master устройства
• Интегрирани Serial ATA/ Serial ATA II host контролери,
поддържащи скорост на трансфер до 1.5/3.0 Gb/s (Serial
ATA II е опция за модела VT8237S)
• Интегриран дву-канален EIDE контролер UltraDMA
133/100/66 Master Mode
• Контролер USB 2.0 с поддръжка на 8 порта USB 2.0
• Интегриран контролер за клавиатура с поддръжка на
PS2 за мишка
Памет
• Поддръжка на модули памет DDR2 667/533/400 DDR2 SDRAM DIMM
• Поддръжка на до два небуферирани DDR2 DIMM слота
• До 2 GB памет на DIMM канал с максимален капацитет 4 GB
Аудио
Интегриран аудио контролер със следните характеристики:
• 8-канален цифрово-аналогов преобразовател с поддръжка на
16/20/24-bit PCM формат за 7.1 канален звук.
• Всички цифрово-аналогови преобразователи (DAC) поддръжат
Български
Multi-Language Translation
Интегриран мрежов контролер (опция)
Спецификация на интегрирания мрежов контролер:
• поддръжка на 10/100 Mb/s, N-Way Auto-negotiation operation
• поддръжка на функция за “събуждане” Wake-On-LAN и дистанционен
wake-up
• Режим: Half/Full duplex
• поддръжка на 10Mb/s и 100Mb/s, N-Way Auto-negotiation operation
• Интегриран едночипов LAN контролер на физическо ниво за 100Base-
TX/10Base-T
• Режим: Half/Full duplex
• Интегриран 10/100/1000 контролер
• Поддръжка на PCI v2.3, 32-bit, 33/66-MHz
• Пълна поддръжка на IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
Възможности за разширяване
Дънната платка има следните разширителни възможности:
• Eдин слот PCI Express x16 за графичен интерфейс
• Един слот PCI Express x1
• Два слота 32-bit PCI v2.3
• Два нископрофилни 40-pin IDE конектора с поддръжка до 4 IDE
устройства
• един конектор за флопидисково устройство
• Два 7-щифтови SATA конектораs
Дънната платка поддържа шина UltraDMA 133/100/66 MB/s
BIOS Firmware
Български
Lapkakészlet
A P4M900 Northbridge (NB) és a VT8237A/VT8237S Southbridge (SB) chip-készlet
bizonyított megbízhatóságú és teljesítményű új és fejlesztett architektúrára épül.
P4M900 • megfelel 66 MHz, 4X/8X transzfer módoknak, Ultra V-Link Host
(NB) 1GB/s teljes sávszélességű interféssze
• Akár két PCI Express portot is támogat, ha ezek egy x16-ként
és egy x1 PCI Express LANE hálózatként vannak konfig-
urálva
• integrált Chrome9 HC 3D/2D grafikai & video vezérlő
• fejlett 64-bites DDR2/DDR SDRAM vezérlő
• ACPI 2.0 és PCI Bus Management 1.1 megfelelés
VT8237A • megfelel 16-bit 66 MHz Ultra V-Link Host 1Gb/s teljes
/VT8237S sávszélességű interfésznek
• A PCI 2.3 specifikációval kompatibilis 33 MHz-en, maximum
(SB) 6 PCI mastert támogat
• Integált soros ATA/ Soros ATA II Host Controllerek, melyek
egészen 1.5/3.0 Gb/s-os adatátvitelt támogatnak (kizárólag
Soros ATA II VT8237S-el)
• Beépített duál csatornás UltraDMA 133/100/66 Master módú
EIDE vezérlõ
• USB 2.0 vezérlő, 8 USB 2.0 portot támogat
• Beépített billentyűzet-vezérlő, PS/2 egér támogatása
Memória
• Megfelel DDR2 667/533/400 DDR2 SDRAM DIMM-eknek
• Két puffermentes DIMM DDR2 egységgel működik
• Maximum 2 GB-os DIMM egységeket támogat, maximális memória 4 GB
Audio
Ez az alaplap a következő Audio lapkakészletek bármelyikét támogatja.
• 8 csatornás DAC támogatás 16/20/24-bit PCM formátum 7.1
hangberendezésre
• Az összes ADC támogatja a 48K/192kHz-es független mintavételi
frekvencia
• Meghaladja a Microsoft PC2001 Követelményeket
• jó minőségű differenciál CD input
Magyar
Multi-Language Translation
Alaplapon levő LAN (választható)
Az alaplapon levő LAN jellemzői:
• 10/100 Mb/s N-Way automatikus beállítással
• A Wake-on-LAN és a távoli ébresztés funkciók támogatása
• Fél-/teljes duplex
• 10Mb/s és 100Mb/s N-Way automatikus beállítással
• Egylapkás 100Base-TX/10Base-T fizikai réteges megoldás
• Fél-/teljes duplex
• Integrált 10/100/1000 adó-vevő
• Támogatja a 32 bites, 33/66 MHz-es PCI 2.3-as változatát
• Teljesen kompatibilis az IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
szabvánnyal
Bővítési lehetőségek
Az alaplap a következő bővítési lehetőségekkel rendelkezik:
• Egy PCI Express x16 foglalat a grafikus interfész
• Egy PCI Express x1 foglalat
• Két 32 bites, a PCI 2.3-as változatával kompatibilis foglalat
• Két 40 tűs lapos IDE foglalat, amelyek maximum négy IDE egységet
képesek kiszolgálni
• Egy hajlékonylemez meghajtó interfész
• Két 7 tűs SATA csatlakozó
Ez az alaplap támogatja az UltraDMA bus mastering megoldást, 133/100/66 MB/s sebességen
Beépített I/O
Az alaplapot az I/O portok és csatlakozók teljes készletével szerelték fel:
• Két PS/2 port az egér és a billentyűzet számára
• Egy soros port
• Egy párhuzamos port
• Egy VGA port
• Egy 1394a port (választható)
• Négy USB port
• Egy LAN port (választható)
• Audio dugasz a mikrofon számára, bemeneti és 6/8-csatornás (opcionális)
kimeneti csatlakozók
BIOS Firmware
Az alaplapon levő AMI BIOS segítségével a felhasználó a rendszer sok paraméterét állíthatja
be, például:
• Energiagazdálkodás
• Ébresztési riasztások
Magyar
• CPU paraméterek
• CPU és memória időzítés
A firmware segítségével a processzor órajel-frekvenciáinak paramétereit is beállíthatják.
Bizonyos hardverjellemzők és szoftverelemek előzetes bejelentés nélkül
módosulhatnak.
Multi-Language Translation