Professional Documents
Culture Documents
GOVERNMENT OF RAJASTHAN
BUILDING WORKS
JODHPUR DISTRICT
INDEX
BORING MACHINE
42 Boring Machine other than diamond 240 160.00 260.00 180.00
core
43 Diamond drilling m/c 787 510.00 880.00 690.00
OTHER MACHINES
44 Mobile Crane 3 tone 705 230.00 775.00 230.00
45 Power winch 230 105.00 290.00 135.00
46 Front end loader 500 200.00 550.00 240.00
47 Hydraulic Scraper 230 160.00 240.00 200.00
48 Chain Pully lock 15 5.00 20.00 10.00
49 Grouting Machine 45 10.00 60.00 15.00
50 Vibrators 90 85.00 100.00 90.00
HIRE CHARGES EARTH MOVING MACHINERY HOURLY BASIS
1 Bull Dozer 180/200HP 415/- P.Hr 195/- P.Hr 560/- P.Hr -
2 Bull Dozer 100/110 HP 275/- P.Hr 105/- P.Hr 305/- P.Hr -
3 Motor Graders 90/- P.Hr 35/- P.Hr 105/- P.Hr -
4 Drum Mix Plant 40-60 TPH 1650/- P.Hr 400/- P.Hr 2000/- P.Hr -
5 Paver Finisher 75TPH 360/- P.Hr 165/- P.Hr 425/- P.Hr -
6 Generating Set 125 Kva 210/- P.Hr 110/- P.Hr 230/- P.Hr -
7 JCB Excavator cum loader 485/- P.Hr 230/- P.Hr 575/- P.Hr -
G-3
CHAPTER-G-2
LABOUR
NOTE:
1- Grade for labour will be determined as per quality of the
work done.
NOTE:
Chapter Code
Description Unit Rate (Rs.)
No.
Chapter Code
Description Unit Rate (Rs.)
No.
3.10 Burshes
3.10.1 Wire brush 6” x 12" Each 50.00
3.11 Cement
3.13 Chemicals
3.15 Clamps
Chapter Code
Description Unit Rate (Rs.)
No.
3.18 Distemper
Chapter Code
Description Unit Rate (Rs.)
No.
3.24 Glass
3.26.4 (2) Green & Black Colour Sqm 690.00 750.00 1600.00
G-9
Chapter Code
Description Unit Rate (Rs.)
No.
Chapter Code
Description Unit Rate (Rs.)
No.
3.37.2 Makrana Albeta (having light streaks) Sqm 550.00 750.00 900.00
3.37.4 Rajnagar Ist Quality with light Sqm 320.00 400.00 500.00
3.37.5 Rajnagar II quality with light spots and Sqm 220.00 270.00 360.00
streaks
3.37.6 Ambaji (Abu) with green shadlow Sqm 400.00 550.00 900.00
G-11
Chapter Code
Description Unit Rate (Rs.)
No.
3.37.9 Andhi Indo Italian (Jaipur Distt.) Sqm 360.00 450.00 600.00
© Green Marble
3.37.16 Bhainslana, Abu & Kishangarh Zebra, Sqm 350.00 350.00 500.00
Narnau
3.37.17 Madras Stones Sqm 140.00 180.00 225.00
3.38 Moorum
Chapter Code
Description Unit Rate (Rs.)
No.
3.41 Niwar
3.42 Oils
3.43.3 27.5cm, long wire spring grade No.2 for Each 170.00
rolling shutter
3.43.4 Ball Bearing for rolling shutters Each 280.00
3.44 Paints
Chapter Code
Description Unit Rate (Rs.)
No.
3.44.5 Enamel Paint (IS : 2932-1964,IS: 133- Ltr 155.00
1975)
3.44.6 Flat Wall Paint Ltr 170.00
3.46 Pigments
3.48 Pipes
3.48.1 Asbestos Cement Pipes & Fittings Ref. Chapter G-4 Material
for Service)
3.48.2 Cast Iron Pipes and Fittings Ref. Chapter G-4 Material
for Service)
3.49 Plaster of pairs Kg 5.00
G-14
Chapter Code
Description Unit Rate (Rs.)
No.
3.50 Primer
3.51 Polish
Chapter Code
Description Unit Rate (Rs.)
No.
3 MM 160 120.00 - - - - - - -
4 MM 190 145.00 - - - - - 80
C.G. 95 122 110 (5
6 MM 285 240 - - - - -
E.G. 125 mm)
C.G. 110
E.G. 145
8 MM - 270 410 - - - - -
OST 325
BST 380
9 MM 274 - - 546 650 - - - -
C.G. 135
E.G. 170
10 MM - - - - - - - -
OST 356
BST 410
C.G. 152
C.G. 225 E.G. E.G. 195
12 MM 345 340 560 625 795 - 320 OST 465 -
BST 585 OST 390
BST 425
16 MM - - - - - - - - -
C.G. 225
C.G. 318 E.G. E.G. 285
18 MM 675 575 - - - - 420 OST 555 -
BST 665 OST 470
BST 505
C.G. 330
C.G. 510 E.G.
E.G. 390
25 MM - 705 - - - OST 785 570 OST 710 -
BST 810 OST 590
BST 650
C.G. 380
E.G. 500
30 MM - - - - - - -
OST 680
BST 760
Laminated Sheet 1mm 265
Laminated Sheet 1.5mm 375
C.G. =
U.B. – Urea P.B. = Phenol E.G. = OST = One BST = Both R.A. = RE -
Commer cial
Bonded Bonded Exterior Grade Side Teak Side Teak Affirmed
grade
G-17
Chapter Code No. Description Unit Rate (Rs.)
3.56 RamRaj (Pily Mitty) Kg 2.00
3.57 Sand
Steel
3.62 3.62.1 Mild steel sheets for tanks (IS : 1730- Kg 45.00
1989)
3.62.2 Mild Steel sheets for doors ( IS : 1730- Kg 45.00
1989)
Providing
Pre- Stones
laminated
3.70 particle C.R. Masonry stone (Khanda Stone)
Stone Slab
Planks Scantings
NOTE :
1 The rates are exclusive of Contractor’s Profit, Overheads but including Octroi,
Royalty, Sales Tax and Other taxes and Supply at PWD Stores/Site of work.
2 White Vitreous China (W.V.C.) ware rates are for first quality of approved make.
3 Rates of Chromium plated (C.P.) brass fitting Synthetic Metal fittings, Rigid PVC
pipes are for approved quality.
4.2 Chain
4.3 Channels
4.4 Cisten
(Elbow action) 15 mm
4.9 Grating
4.9.1 Cast Iron ( C.I.) all sizes & all types Each 12.00
Chromium plated (C.P.) Brass of
4.9.2
approved
make 100mm dia Each 15.00
4.13 Pipe
(A) Asbestos Cement (3mtr length) ISI Non ISI
4.13.1 50mm dia (IS) Each 35.00 27.00
4.13.2 75mm dia (IS) Each 40.00 30.00
4.13.3 100mm dia (IS) Each 45.00 35.00
4.13.11 Soil or Vent ( S.V.) Cowel Each 14.00 17.00 20.00 30.00
4.13.12 Cement Concrete (C.C.) Cowel Each 17.00 24.00 21.00 30.00
4.13.13 Rain Water ( R.W.) Head Each 17.00 19.00 21.00 30.00
4.13.20 Pipe double Socket (180cm long) Each 310.00 375.00 460.00 775.00
4.13.62 Flanges
15mm dia Each 16.40
20mm dia Each 23.00
25mm dia Each 38.00
32mm dia Each 45.20
40mm dia Each 53.40
50mm dia Each 38.00
65mm dia Each 117.00
80mm dia Each 140.00
100mm dia Each 200.00
125mm dia Each 430.00
150mm dia Each 532.00
4.18 Tanks :
4.18.1 R.C.C. 240 Liters. Each 340.00
4.18.2 R.C.C. 540 Liters. Each 715.00
G-47
Chapter Code Rate
Description Unit
No. (Rs.)
4.26 Valve
Gun metal full way valve (IS) 15mm
4.26.1 Each 90.00
dia
4.26.2 -do-20mm dia Each 125.00
4.26.7 - Brass non return valve (IS) 15mm dia Each 90.00
Waste Couplings
Chromimu plated (C.P.) of
4.28.1 Each 40.00
approved make 32mm
Chromium plated (C.P.) of approved
4.28.2
make
(Heavy 32mm Each 60.00
Waste Pipe
Galvanised Iron (G.I.) ’B’ class with
4.29.1 Each 80.00
fitting 25mm
4.29.2 -do-32mm Each 90.00
1 2 3 4 5 6 7 8 9 10 11 12 13 14
Earth, Sand ,line
5.1 morrum, manure or Cum 18.60 3.00 45.60 52.90 3.40 66.50 2.90 81.00 2.60 107.00 2.30
sludge
Building Rubish
5.2 Stone metal (Grit Cum 20.00 3.40 50.60 60.10 3.40 73.70 3.00 88.70 2.60 114.70 2.30
and Ballast etc.)
Stone for Masonry
5.3 Cum 21.50 3.70 54.80 67.20 4.20 84.00 3.40 101.00 3.40 135.00 2.60
work & soiling
50.4 Excavation work Cum 22.90 4.20 60.70 72.90 4.50 90.90 3.70 109.40 3.70 146.40 3.00
1000
5.5 Bricks 37.20 7.50 104.70 113.00 7.50 143.00 7.50 180.50 6.10 241.50 4.80
Nos
1000
5.6 Bricks Tiles 30.00 5.20 76.80 81.80 6.10 106.20 6.10 136.70 5.20 188.70 3.40
Nos
Cement, Stone
Blocks pipes and
5.7 MT 22.90 1.90 48.60 2.60 59.00 3.00 74.00 2.30 97.00 1.90
other heavy
materials
Steel, Tar Bitumen
5.8 and Timber and MT 27.20 2.60 50.60 60.10 3.40 73.70 3.40 90.70 2.60 116.70 1.90
Steam Coal
Empty Bitumen
5.9 10No 10.00 1.50 23.50 30.00 1.10 34.40 1.50 41.90 1.10 52.90 1.10
Drums
5.10. Carriage with care precast cement concrete blcok like Dand & kerbs etc. weighting
5.10.1 Upto 50Kg Each -- -- -- 4.50 0.30 5.70 0.30 7.20 0.10 8.20 0.10
5.10.2 51 to 70Kg Each -- -- -- 6.70 0.40 8.30 0.30 9.80 0.10 10.80 0.10
5.10.3 Providing and Each -- -- -- 8.30 0.60 10.70 0.30 12.20 0.10 13.20 0.10
5.11 RCC Hume Pipe with Collar
5.11.1 Dia 300mm Mtr -- -- 20.00 24.00 0.60 26.40 0.30 27.90 0.10 28.90 0.10
5.11.2 Dia 600mm Mtr -- -- 52.90 55.80 1.30 61.00 1.20 67.00 0.90 76.00 0.60
5.11.3 Dia 900mm Mtr -- -- 131.60 140.10 2.50 150.10 2.30 161.60 1.80 179.60 1.20
5.11.4 Dia 1200mm Mtr -- -- 164.50 181.60 3.30 194.80 2.50 207.30 1.80 225.30 1.30
G-55
Chapter
Description Unit Rate (Rs.)
Code No.
Remarks
1- The rates will be applicable in all cases whether
material are unloaded on a leaded from railway
siding or direclty unloaded on or loaded from
transport
NOTE:
Rate (Rs.)
Chapter Subsequent
Description Unit Cost (Rs.)
Code No. 1st Day days (Per
Day)
Chairs
6.1 Cane chair of iron pipe without arms Each 250.00 5.00 3.00
6.2 Plastic cane chair of Aluminium pipe with Each 900.00 25.00 15.00
arms
6.3 Plastec cane chair Aluminium pipe without Each 900.00 25.00 15.00
arms (Fix)
6.4 Aluminium Padded chair with arms (Fix) Each 1400.00 40.00 30.00
6.5 Chrome padded chair with arms ( Fix) Each 4000.00 150.00 100.00
6.6 -do- without Arms Each
Table :
6.9 Centre Table sunmica Top 11 1/2’x 3’ Each 1000.00 18.00 15.00
6.10 Peg Table Sunmica Top 1’x1’ Each 1000.00 18.00 15.00
Floor Covering:
Rate (Rs.)
Chapter Subsequent
Description Unit Cost (Rs.)
Code No. 1st Day days (Per
Day)
6.16 White Cotten chader (Sheet) (Washed) 6’ x 4’ Each 90.00 15.00 12.00
Overhead Covering:
6.19 Shamiyana ordinary coloured with Jhalar & Sqm 200.00 6.00 4.50
Bamboo cover.
6.20 Shmiyana coloured Fancy with Jhalar and Sqm 1000.00 50.00 40.00
Bamboo cover and coloured Fancy
6.21 Shamiyana Fancy with GOTA & Silk lace, Sqm 1000.00 50.00 40.00
Jhalar & Bamboo cover
6.22 Mahfil with Bally & Bamboo frame (Plan). Sqm 1200.00 60.00 45.00
6.24 -do- with Plane &Wooden frame Sqm 1200.00 60.00 45.00
6.25 Mahfifl with Bally & Bamboo frame (water Sqm -- 65.00 50.00
proof) plain
6.26 -do- with Chunnat Sqm -- 80.00 55.00
6.27 -do- with Wooden frame & Chunnat & Plane Sqm -- 65.00 50.00
6.28 Add if bally posts are covered with wooden Sqm -- 12.00 6.00
box
6.29 Curtain Cotton . Plane with Bamboo frame. Sqm -- 15.00 12.00
6.31 Curtain with wooden frame of approved design Sqm -- 20.00 15.00
6.32 Kannat 9’x6’ fixed with Tent Each 1100.00 30.00 25.00
6.35 5mm Galvanised Iron (G.I.) pipe 6. Mtr. long Each -- 40.00 30.00
with new silk flag.
G-58
Rate (Rs.)
Chapter Subsequent
Description Unit Cost (Rs.)
Code No. 1st Day days (Per
Day)
6.36 Bamboo Pole with cotton cloth cover 3 to 4 Each -- 10.00 5.00
Mtr. length.
6.37 Water Proof Tripal. Sqm -- 50.00 35.00
6.38 Wooden stage height 45cm. with steps & Sqm -- 33.00 25.00
Jhallar.
6.39 -do- height 75 cm.-do- Sqm -- 45.00 30.00
6.42 Dunlop mattress with white chadar size 6’ X Each -- 40.00 30.00
3’
6.43 Masand with white cover. Each -- 15.00 10.00
6.44 Galvanised Iron (G.I.) sheet water tank 150ltr Each -- 20.00 15.00
6.48 Speech stand having Sunmica top. Each 1500.00 150.00 100.00
INDEX
Note: The items in this chapter will cover earth work for Building, Bridges and
Sanitary Works
Chapter
Description Unit Rate (Rs.)
Code No
Cum 316.00
1.4 Deduct in item No. 1.2 & 1.3 for not rolling
with power roller of 8-10 tonne capacity for
banking excavated earth in layers not
exceeding 20 Cm. In depth. Cum 3.00
B-2
Chapter
Description Unit Rate (Rs.)
Code No
1.10 Add extra over item No. 1.8 and 1.9 for
every additional lift of 1.5 Mtr. or part
thereof :
1.10.1 In all kind of soils. Cum 18.00
1.11 Add extra over item No. 1.8 and 1.9 for
excavation in saturated soil where pumping
or baling out of water is required, including
shoring strutting where required and
dewatering. Cum 20%
1.22 Add extra over item No. 1.19 & 1.20 for
planking, strutting and packing matrial for
cavities (in close timbering) if required to
be left permanently in position (face area of
timber permanently left to be measured)
Sqm 129.00
1.26 Add extra over item No. 1.23, 1.24, 1.25 for
planking and strutting in open timbering if
required to be left permanently in position
(face area of timber permanently left to be
measured)
Sqm 65.00
2- Rates for lime mortar is inclusive of mixing by mortar mill mixer. If no mortor mill
(Gharat) mixer is used 20% deduction shall be made from rate.
Chapter
Description Unit Rate (Rs.)
Code No
LIME MORTAR
2.1 Lime sand mortar 1:2 (1 lime putty : 2 sand) Cum 1360.00
2.2 Lime sand mortar 1:3 (1 lime putty : 3 sand) Cum 1083.00
2.3 Lime sand mortar 1:2 (1 lime putty : 2 surkhi) Cum 1517.00
2.4 Lime Surkhi mortar 1:3(1 lime putty : 3 surkhi) Cum 1374.00
2.5 Lime cinder mortar 1:2(1 lime putty : 2 Cinder) Cum 833.00
CEMENT-MARBLE-POWDER-MORTAR
COMPOSITE-MORTAR
2.21 Cement lime marble power mortar 1:1:6 (1-
Cement : 1-Lime putty : 6-marble power) (for
Sandla) Cum 2516.00
2- For all concrete work coarse sand shall be used no extra lead will be paid.
4- Under exceptional conditions, where mechanical mixer and vibrator are not used (with the
approval of Engineer incharge reduced by 5%, for mechanical mixer and 3%, for
vibrator.)
Chapter
Description Unit Rate (Rs.)
Code No
LIME-CONCRETE
3.1 Providing and laying lime concrete in foundation
and plinth using 40% lime mortar and 40 mm.
nominal size grades aggregate (Crusher Broken)
including ramming and watering complete in all
respect comprising of IS 2541-1991 :
CEMENT-CONCRETE (CAST-IN-SITU)
3.8 Extra over item No. 3.7 above floor three level for
each floor or part there of IS 456-2000:. Cum 38.00
REINFORCED CONCRETE
1 Rates for complete work includes cost of form work (four sides only) laying, compaction,
vibration, curing, all types of T & P, including P.O.L. etc. and grinding and mixing of mortar.
2 The rates for centering and shuttering are for steel shuttering for complete work including
centering, shuttering nails and other such items required. The shuttering shall be removed after
required time as per instructions by Engineer-in-charge, & IS : 456:2000.
4 If any machinery lime mixture machine, vibrator or mortar miller etc. is supplied by the Deptt. the
hire charges will be charged and transportation cost will be borne by the contractor.
5 No RCC work shall be permitted without the use of mechanical mixer and vibrator.
6 Contractor at site shall arrange a stand by mechanical mixer and extra vibrator if more than
20cum of RCC is to be done in a single day.
7 The rate for R.C.C. work in inclusive of cost providing plastic cover Block or cement mortar
cover Block. The rates of centering includes placement of cover blocks.
8 The producer/ manufacturer/ contractor shall obtain mix proportions of each grade of concrete
from recognized laboratory and submit detail to the Engineer-in-charge for approval. Concrete of
any particular design mix and grade shall be produced/manufactured only on obtaining written
approval of the Engineer-in-charge.
9 For any change in make/quality/quantity in the ingredients of a particulars concrete, for which
mix has been designed earlier and approved by the Engineer-in-charge. The mix has to be
redesigned and approval from Engineer-in-charge to be obtained again.
B-21
Chapter
Description Unit Rate (Rs.)
Code No
CAST IN SITU CONCRETE :
4.1 Providing and laying in position specified grade of reinforced
cement concrete including curing compaction finishing with
rendering in cement sand mortar 1:3 (1-Cement:3-coarse sand)
and making good the joints excluding the cost of centering,
shuttering and reinforcement. All work up to plinth level IS
456-2000:
Cum 4520.00
Cum 4556.00
B-23
Chapter
Description Unit Rate (Rs.)
Code No
4.8 Add extra for RCC work in superstructure above floor three
level for each subsequent floor level or part there of for item
no.4.2 to 4.7 (IS 456-2000).
Cum 42.00
4.9 Add extra over item No. 4.1 to 4.7 for using chloride free
concrete plasticizer and super plasticizer of approved quality
and make for reducing the water cement ratio and increasing the
slump / workability in specified standard / recommended
dosages.
Cum 8%
4.10 Add extra over item of concrete work for using integrals water
proofing compound free from chlorides with good plasticizers
properties of approved quality and make for reduction in
permeability of concrete in specified standard / recommended
dosages. Cum 8%
SHUTTERING
4.11 Centering and shuttering with plywood or steel sheets including
strutting, propping, bracing both ways and removal of
formwork for foundations in basements rafts, footings, strap
beams, bases of columns, etc. up to plinth level.
Sqm 136.00
4.12.2 (B) Consider a beam of 6 m. clear span, 0.50 m. Deep 0.3 m. wide
and height 3.5 from floor. Sqm 282.00
4.12.6 Arches, domes, vaults etc. exceeding 6 Mtr. span. Sqm 964.00
4.12.10 Grid roofing with panel area less than 2.5 Sqm. (contact area to
be measured). Sqm 291.00
4.12.11 Grid roofing with panel area more than 2.5 Sqm. (contact area
to be measured). Sqm 297.00
4.12.12 Add extra for shuttering in circular work in plan up to dia 10 m
over item Nos. 4.12.1 to 4.12.3 Sqm 36.00
4.12.13 Add extra for shuttering in circular work in plan, above 10 Mtr.
and up to 30 Mtr. dia over item No. 4.12.1 to 4.12.3
Sqm 46.00
4.12.14 Add extra for using steel props and bracing etc. instead of
wooden member over item Nos. 4.12.1 to 4.12.3
Sqm 20%
4.12.15 Add extra over item Nos. 4.12. to 4.12.11 for doing centering
and shuttering work for each subsequent storey.
Sqm 18.00
4.12.16 Add extra for shuttering domes in slope (Horizontal & Vertical)
having more than 30 m dia. Sqm 16.00
4.12.17 Add extra for every additional 1 m ht. Or part thereof beyond
4.5 mtr. of shuttering. Sqm 18.00
4.12.18 Add extra for every additional 1 m span or part there off beyond
6 m span for shuttering of beams only.
Sqm 16.00
STEEL-REINFORCEMENT
4.13 Providing and fabricating reinforcement for R.C.C. work
including straightening, cutting, bending, placing in position
and binding (including cost of binding wire) all complete up to
floor three level.
B-25
Chapter
Description Unit Rate (Rs.)
Code No
4.13.1 Mild steel and medium tensile bars (IS : 432) Kg. 62.00
4.15 Providing precast cement concrete jali, nominal mix 1:2:4 (1-
Cement:2-Sand:4-stone aggregate 6 mm nominal size)
reinforced with 1.6 mm dia Mild steel wire, including centering
and shuttering roughening, cleaning, fixing and finishing in
cement mortar 1:3 (1-Cement:3-fine sand) etc., complete as per
approved design excluding plastering of jambs, sills and soffits
up to floor three level.
Cum 5820.00
Cum 6070.00
Cum 10076.00
B-27
Chapter
Description Unit Rate (Rs.)
Code No
Cum 5615.00
4.22 Supplying and fixing precast R.C.C. door and window frames
up to floor three level nicely finished in cement concrete mix
1:2:4 (1-Cement:2-sand:4-stone aggregate graded 12.5 mm
nominal size) with 1 % steel, single or double rebated as
required, of size :
4.23 Add extra over item Nos. 4.15 to 4.22 in superstructure above
floor three level for subsequent floor level or part thereof.
2%
4.24 Providing and fixing precast R.C.C. slab mix 1:2:4 (1-Cement:2-
sand:4-stone aggregate 12.5 mm nominal size) as per design up
to 30 mm thick for shelves etc. including cost of reinforcement
consisting of wire mesh 100x100x4mm with fine finish.
Sqm 368.00
4.25 Add extra over item No. 4.24 for mosaic finish on one to three
edges and top surface of shelves with marble chipping (1 mm to
4 mm nominal size) in grey cement duly finished and polished.
Sqm 129.00
B-28
Chapter
Description Unit Rate (Rs.)
Code No
Cum 4521.00
4.28.1 Providing M-25 grade R.C.C. instead of M-20 grade R.C.C. Cum 156.00
4.28.2 Providing M-30 grade R.C.C. instead of M-20 grade R.C.C. Cum 214.00
4.28.3 Providing M-35 grade R.C.C. instead of M-20 grade R.C.C. Cum 260.00
B-29
Chapter
Description Unit Rate (Rs.)
Code No
4.29 Add extra on item 4.26 and 4.27 for R.C.C. work above floor
three level for each floor or part thereof.
Cum 101.00
Cum 6695.00
MISCELLANEOUS
4.33.1 Providing and fixing in position copper plate as per design for
expansion joints. Kg. 888.00
4.35 Providing and filling in position bitumen mix filler of 100 mtr. Length.
proportion 80 Kg. Of hot bitumen, 1 Kg. Of cement and 0.25 Per cm width and
per cm.
cubic meter of coarse sand for expansion joints.
Depth.Per 100 m.
length 185.00
B-30
Chapter
Description Unit Rate (Rs.)
Code No
4.41 Add extra for laying R.C.C. in or under water and or liquid mud P. Cum.
including the cost of pumping or bailing out water and P. Mtr.
removing slush etc. complete. Depth 33.00
4.43.1 Serrated with central bulb (225 mm wide, 8.11 mm thick). Mtr. 450.00
4.43.2 Dumb bell with central bulb (180 mm wide, 8 mm thick). Mtr. 355.00
Mtr. 525.00
4.44.3 To horizontal joints between beams masonary in size 40 mm
width and 20 mm depth on top faces with pouring grade
providing required back-up material (Thermocoal foam)
complete.
Mtr. 850.00
B-32
Chapter
Description Unit Rate (Rs.)
Code No
4.45 Welding of MS rounds plain/ tor for RCC work joints are to be
butt or v shape, confirming to IS standreds, complete in all
respect at work site.
4.46 Labour charges for cutting, bending for fabrication and binding
reinforcement (plain or top/ribbed steel) as per drawing and
design for R.C.C. and R.B. work including cost of binding wire
with all lead complete upto floor three level,
Kg. 6.90
Cum 5210.00
B-33
CHAPTER No. B-5
BRICK WORK
NOTE :
1 Rates are for three storey from plinth level and include
cost of water, scaffolding, centering and shuttering,
curing and raking of joints etc.
Chapter
Description Unit Rate (Rs.)
Code No
5.2 Add extra over item No. 5.1 for brick work in
superstructure up to third storey IS 1077-1986.
Cum 252.00
B-34
Chapter
Description Unit Rate (Rs.)
Code No
5.4 Add extra over item No. 5.1 for making tapered surface
of brick masonary extra for cutting or chamfering of
bricks to required shape. Cum 312.00
5.7 Add extra over item No. 5.5 & 5.6 for arches exceeding
6 M span including all shuttering and centering, bolting
wedging and removal.
Cum 125.00
5.9 Add extra over item No. 5.8 for half brick masonary in
superstructure up to third story. Sqm 32.00
5.11 Deduct if item No. 5.8 & 5.10 for not using nominal
hoop reinforcement at requisite interval. Kg. 48.40
5.12 Honey comb brick work half brick thick with bricks of
class designation 75 up to third storey in :
5.12.1 Cement sand Mortar 1:4 (1 Cement : 4 Coarse sand) Sqm 186.00
5.12.2 Cement sand mortar 1:6 (1-Cement : 6-Coarse sand). Sqm 177.00
5.13.2 Add extra over item No. 5.1 for laying bricks work in or
under water and or liquid mud including cost of pumping
of or bailing out water and removal of slush etc.
Cum per mtr
complete.
depth. 122.00
5.14 Add extra over item No. 5.1 for laying bricks work in or
under foul condition. Cum 102.00
B-36
Chapter
Description Unit Rate (Rs.)
Code No
5.18 Add extra over all type of bricks for using clay fly ash
bricks. Cum 15%
5.19 Extra for doing brick work for each subsequent storey
for respective items beyond third story.
5.19.1 Quantity in Cum. Cum 78.00
5.21 Add Extra over item of brick work for doing brick work
with class designation100 instead of class designation
75.
5.21.1 Quantity in Cum. Cum 218.00
5.21.2 Quantity in Sqm. Sqm 25.00
B-37
Chapter
Description Unit Rate (Rs.)
Code No
3 Rate are for complete work including fixing, all pointing in cement
mortar 1 : 3/ lime mortar 1 : 2/ gypsum.
7 Deduct for Dasa & lintel of vents for plinth and basement @ Rs. 20/-
per Cum.
10 For the item of ashlar work 3 – line stone dressed, full rate should be
allowed on test check of Executive Engineer.
Chapter
Description Unit Rate (Rs.)
Code No
PART (A) : GENERAL - STONE WORK
6.1 Random Rubble stone masonary for foundation and plinth
in Cement Sand Mortar above 30 Cm. thick wall IS 1597
(Part-I) 1992 in :
6.1.3 Lime Sand Mortar 1:3 (1-Lime Putty :3-Sand). Cum 1754.00
6.2.3 Lime Sand Mortar 1:3 (1-Lime Putty :3-Sand). Cum 2892.00
6.3.1 Wall curved in plan to mean radius not exceeding 6 Mtr. Cum 352.00
6.5.6 Extra over item no. 6.5.5 for fine grinded stone used
instead of rough dressed Sqm 61.00
6.5.7 Marble facing abardari (White and Pink) polished, 18 to
25 mm thick. Sqm 1389.00
6.5.8 Chittor/Nimbahera or similar stone facing polished 18 to
25 mm thick. Sqm 1542.00
6.6 Providing stone veneer facing in strips up to 125 mm
width and up to 20 mm thick in cement mortar 1:4
including cement pointing 1:2 with and admixture of
pigment matching stone shade up to 4.5 Mtr. height above
plinth level, in :
6.6.1 White / Red / other stone rough dressed. Sqm 1542.00
6.6.2 Extra over item no. 6.6.1 for fine grinded stone used
instead of rough dressed Sqm 58.00
B-42
Chapter
Description Unit Rate (Rs.)
Code No
ARCH MASONRY
6.7 Stone masonary for arches in cement sand mortar 1:3
including centering shuttering and pointing etc. up to 4.5
Mtr. height from plinth level:
6.7.1 With hammer dressed stone (to be plastered). Cum 6279.00
6.7.5 Cut stone fine dressed with fine joints, arch span up to 1.5
Mtr. Cum 10122.00
6.7.6 Cut stone fine dressed with fine joints, arch span above
1.5 Mtr. Cum 10501.00
6.8 Extra over item No. 6.7 for dome masonary. Shuttering
and Form work if required to be paid separately. Cum 1565.00
6.9 Deduct if arch masonary is done in lime sand mortar 1:2 Cum 311.00
6.17 Extra over item 6.16.1 to 6.16.6 for machine cut both side
polished stone is used Sqm 54.00
6.19 Deduct from item No. 6.18 for fixing done in lime sand
mortar 1:2 instead of CM 1:3. Sqm 53.00
6.23 Add extra for doing masonary work in or under water and Cum per
or liquid mud including cost of pumping or bailing out mtr
water and removing and slush etc. complete. depth. 108.00
B-45
Chapter
Description Unit Rate (Rs.)
Code No
6.26.1 (A) Upto 15 cm thick Soorsagar or eqvt. White Ashlar Cum 20262.00
6.27.3 Above 20 cm. thick (pats) & upto 2.15 m length Cum 4653.00
6.27.4 Above 20 cm. thick (pats) & above 2.15 m length Cum 4773.00
6.29 Supplying and fixing ashlar solid block pillars fully fine (3
lines) dressed
(a) Soorsagar or eqvt. White Ashlar Cum 27712.00
6.30 Supplying and fixing ashlar stone arches fuly fine (3 lines)
dressed for 1.5 to 5m. Span (Net content payable)
(a) Soorsagar or eqvt. White Ashlar Cum 25191.00
6.43 Supplying and fixing Red ashlar stone Jali 5 to 7 cm. thick
curved
6.43.1 (A) Red Ashlar upto half depth Sqm 1757.00
6.48 Red ashlar todies for verandah (pillar and pat) fine (3 lines
dressed) Sqm 781.00
6.49 Supply and fixing Red Ashlar todies for chhajjas and
shelves fine (3 lines) dressed 30x30x10cm. Sqm 599.00
6.60 Supplying and fixing Flat rain water spouts 25 Cm. Wide
in Soorsagar stone clopped chhajja including cutting &
moulding. Each 1383.00
6.89 Supply and fixing Jodhpur sand stone Machine cut Dash,
Coping,sill,lintel fixed in cement sand mortar 1:4.
(A) 15 cm (6") thick Sqm. 2436.00
6.90 Supply and fixing Jodhpur sand stone Machine cut Kerb
stone (10cm wide 40 cm. height) fixed in white cement
sand mortar 1:4 with pigment including EarthWork.
Rm. 714.00
6.91 Supply and fixing Jodhpur sand stone Machine cut Nali
fixed in white cement sand mortar 1:4 with pigment
including E/W
6.92 Add extra for facing with white ashlar stone three line
dressed of size 300x300mm with min. thickness of
125mm, including all four edge are chamfered cut 12mm x
12mm with 3 line dressing, every fifth stone header with
thickness min.300 mm,including additional cost of stone
as per drawing or as approved by Engineer In Charge,
Complete with all respect .
Sqm 3625.00
Chapter
Description Unit Rate (Rs.)
Code No
7.1 Marble stone flooring table rubbed, 18-20 mm thick over
20 mm (Av.) thick base of CM 1:4 (1-Cement:4-coarse
sand) jointing with white cement mortar 1:2 (1-White
cement:2-marble dust) with pigment to match the shade of
the marble slab including grinding rubbing and polishing
complete IS 1130-1969.
OR
Providing and fixing stone slabs table rubbed, 18-20mm
thick in Walls, Steps, Pillars, Counters, Jambs, Shelves,
Sills etc. laid on 12 mm (Av.) thick base of CM 1:3 (1-
cement:3-coarse sand) jointing with white cement mortar
1:2 (1-White cement:2-marble dust) with pigment to match
the shade of the marble slab complete including grinding
rubbing and polishing.
WHITE MARBLE
(C) 2
Size upto 1501 to 3600 Cm Sqm 1488.00
7.1.10 Banswara.
PINK MARBLE
7.1.11 Udaipur (Babarmal).
(A) Size upto 800 Cm2 Sqm 856.00
(A) 2
Size upto 800 Cm Sqm 868.00
7.1.13 Bundi.
GREEN MARBLE
7.1.14 Kesriaji (Rikhabdeo).
(A) Size upto 800 Cm2 Sqm 868.00
(C) 2
Size upto 1501 to 3600 Cm Sqm 1054.00
7.1.15 Abu.
(A) Size upto 800 Cm2 Sqm 868.00
BLACK MARBLE
7.1.16 Bhaislana, Abu, Kishangarh Zebra.
(A) Size upto 800 Cm2 Sqm 773.00
GREY MARBLE
7.1.17 Bundi.
(A) Size upto 800 Cm2 Sqm 773.00
Note:
1 Add extra for doing mirror polishing
Sqm 67.00
7.4 Providing and fixing Ist quality MAT finished ceremic tile
size 300x300mm confirming to IS : 13753 colour such as
white, grey, ivory, fume red brown in walls, floors, steps,
pillars etc. laid on a bed of neat cement slsurry including
nicely finished joints using water proof joint filler power
and finishing with flush pointing in white cement mixed
with pigment to match the shade of tile complete
(excluding the cost of cement plaster).
Sqm 820.00
7.5 Providing and fixing Ist quality MAT finished ceremic tile
size 300x300mm confirming to IS : 13753 coloured tile
expect white, grey, ivory, fume red brown in walls, floors,
steps, pillars etc. laid on a bed of neat cement slurry
including nicely finished joints using water proof joint
filler power and finishing with flush pointing in white
cement mixed with pigment to match the shade of tile
complete (excluding the cost of cement plaster).
Sqm 838.00
Note:
1 Add extra over item No. 7.3, 7.4, & 7.5 for floor work due
to extra cost of cement mortar 1:4 (1-Cement:4- fine sand)
20 mm thick.
Sqm 60.00
2 Add extra over item No. 7.3 for using coloured glazed tiles
instead of white/ivory Sqm 25.00
3 Deduct on item No. 7.4 & 7.5 for using tiles of approved
make II quality Sqm 10%
B-63
Chapter
Description Unit Rate (Rs.)
Code No
4 Add extra over item No. 7.3, 7.4 & 7.5 for marble printed,
granite shade tile. Sqm 20%
5 Add extra over item No. 7.4 & 7.5 for using 400mm x
400mm tiles
Sqm 50.00
7.11 Extra for providing opening of required size & shape for
wash basin / kitchen sink in kitchen platform, vanit
counters and similar location in marble / stone work
including necessary holes for pillars taps etc. including
rubbing and polishing of cut edge etc. complete.
Each 49.00
WOOD WORK
Chapter
Description Unit Rate (Rs.)
Code No
8.1 Supplying & fixing door, window, chowkhats and other frames,
including antitermite treatment, M.S. flat, hold fasts of size
250x40x3mm fixed with M.S. bolt 5 mm dia 50 mm long duly
embedded in cement concrete M-15 grade IS 4121-1967 :
8.3 Deduct from item Nos. 8.1 and 8.2 in inferior than Grade – I
wood is used. 20%
8.4 Add extra over item no 8.1 for wood work for stair case railing Cum 10%
8.5 Add extra in frames for circular members such as in fan lights,
staircase railing etc. Cum 10%
B-68
Chapter
Description Unit Rate (Rs.)
Code No
8.7.2 One side teak face particle board, in column No. 7. Sqm 180.00
8.7.3 Both sides teak face particle board. In column No. 7 Sqm 224.00
8.7.4 One side laminated face particle board, in column No. 7 Sqm 186.00
8.7.5 Both side laminated face particle board, in column No. 7 Sqm 214.00
8.7.7 Using medium density fibre board one side laminated face
instead of particle board, in column No. 7
Interior grade Sqm 188.00
Exterior grade Sqm 208.00
8.7.8 Using medium density fibre board both side laminated face
instead of particle board, in column No. 7
Interior grade Sqm 237.00
8.7.9 Using thicker panels than 12 mm, in column No. 7 for doors of
thickness 40 mm and above
A 15 mm thick MDF board Interior grade. Sqm 245.00
8.7.11 Add extra for providing fixed Nigeria / Ghana Teak wood
grade-I louvers instead of wooden panels in column No. 4 for
Nigeria / Ghana wood door shutters. Sqm 211.00
8.7.12 Add extra for providing movable Nigeria / Ghana Teak wood
grade I louvers instead of wooden panels in column No. 4 for
Nigeria / Ghana Teak wood door shutters. Sqm 304.00
8.7.13 Extra for providing heavy sheet glass panes instead of ordinary
glass in glazed doors, windows and clearstory window shutters,
(Area of opening for glass panes excluding portion inside rebate
shall be measured) :
8.7.14 Extra for providing frosted glass panes instead of ordinary glass
panes in doors, windows and clerestory window shutters. (Area
of opening for glass panes excluding portion inside rebate shall
be measured).
(A) 4mm thick Sqm 255.00
(B) 5mm thick Sqm 500.00
8.7.15 Add extra for etching work in glass work as per direction of
Engineer incharge (Area of opening for glass panes excluding
portion inside rebate shall be measured). Sqm 791.00
8.10.2 One side teak face particle board, in column No. 7. Sqm 121.00
8.10.3 Both sides teak face particle board in column No. 7 Sqm 152.00
8.10.4 One side laminated face particle board, in column No. 7 Sqm 134.00
8.10.5 Both side laminated face particle board, in column No. 7 Sqm 144.00
8.10.7 Using medium density fibre board one side laminated face
instead of particle board, in column No. 7
Interior grade Sqm 111.00
8.10.8 Using medium density fibre board both side laminated face
instead of particle board, in column No. 7
Interior grade Sqm 146.00
Exterior grade Sqm 162.00
8.10.10 Add extra for providing Nigeria / Ghana Teak wood grade – I
fixed louvers instead of glazing in column No. 4 for Nigeria /
Ghana teak wood door shutter.
Sqm 68.00
8.10.11 Add extra for providing Nigeria / Ghana Teak wood Grade – I
movable louvers instead of glazing in column No. 4 for Nigeria
/ Ghana teak wood shutter.
Sqm 98.00
8.14 Add extra over item No. 8.12 and 8.13 for :
8.14.1 Using Phenol bounded exterior grade particle board instead of
urea bonded in column No. 7 :
Sqm 23.00
8.14.2 One side teak face particle board in column No. 7. Sqm 105.00
8.14.3 Both side teak face particle board in column No. 7 : Sqm 147.00
8.14.4 One side laminated face particle board in column No. 7 : Sqm 147.00
8.14.5 Both side laminated face particle board in column No. 7 : Sqm 146.00
8.14.7 Using medium density fibre board one side laminated face
instead of particle board in column No. 7 :
Interior grade Sqm 104.00
8.14.8 Using medium density fibre board both side laminated face
instead of particle board in column No. 7 :
Interior grade Sqm 120.00
8.16.1 Providing and Fixing Bearing Base door closure. Each 1610.00
8.16.2 Providing and Fixing hydraulic door closure ISI marked IS
3564-1995.
Each 795.00
8.16.3 Providing and Fixing mortice lock of IS 2209-1976 : with
(A) C.P. steel handles. Each 397.00
(B) Brass handles. Each 715.00
8.18 Providing and fixing external grade board solid core single leaf
flush door shutters ISI 2202-67 marked using Phenol
formaldehye resin, in glue both sides with approved steel
fittings complete as per Annexure ‘A’ IS 2202 (Part I & II)
1999/1983.
8.19.5 Extra in flush doors for providing vision panel of size 15x15
Cm. square or 15 Cm. dia. Each 150.00
8.19.6 Extra if louvers (not exceeding 0.2 sqm. ) are provided in flush
door shutters (overall area of door shutters to be measured)
Decorative type door. Sqm 241.00
8.19.7 Extra for cutting rebate in flush door shutters (Total area of the
shutter to be measured). Sqm 100.00
8.20 Providing and fixing, flush door shutters non decorative type
(hollow core construction) with internal frame of Ist grade
wood having styles and top rails of 100 mm width & bottom
and lock rails of 150 mm width with 3 Nos. cross battens of 50
mm thick width using 4 mm thick commercial ply on both faces
of shutters & 6 mm thick beading of respective wood using with
approved steel fitting as per Annexure 'A' IS 2191 (Part I & II)
1983:-
(A) 25 mm thick.
8.20.1 Nigeria teak wood grade – I Sqm 2222.00
8.20.5 Providing and fixing factory made solid core single leaf Door
shutter made out of composite ECO friendly wood laminated
with 0.8 mm thick polymer termite and water resistant five
retendent technology, gluing by vacuum lamination technology
various premoulded design on both face as per IS-2202 (Part-I)
1991 (Door fitting shall be supplied by the department)
8.21 Add extra over item No. 8.20 for Double leaf shutters.
25%
B-84
Chapter
Description Unit Rate (Rs.)
Code No
8.22 Add extra for providing 4 mm thick teak veneer ply instead of 4
mm thick commercial ply over item No. 8.20 Sqm 438.00
8.23 Add extra for providing vision panel not exceeding 1 Sqm.
rectangular or circular. Each 79.00
PELMETS
8.24 Providing and fixing 12 mm thick pelmets with 20 mm dia C.P.
steel curtain rod and brackets 100x25x3mm M.S. flat etc.
complete.
8.24.1 Sheesham wood Grade -I
(A) 100 mm wide Mtr. 163.00
8.25 Add extra over item No. 8.24 providing 12 mm thick top
horizontal cover of respective wood on pelmets :
CURTAIN RODS
8.27 Providing and fixing Aluminium curtain rails with rollers stop
ends rails and brackets in pelmets. Mtr. 245.00
8.28 Providing and fixing 20 mm dia Conduit pipe curtain rods with
steel brackets etc. complete. Mtr. 35.00
8.30 Providing and fixing Hollow core partition wall using 50x30
mm Chir wood frame 600 mm c/c on both directions, door
opening as per drawing with steel fittings antitermite treatment
complete as per specifications using :
SHELVES
8.31 Providing and fixing flat pressed 3 layer particle board in
shelves with screws and wooden brackets
8.31.1 12mm thick Sqm 470.00
WALL PANELLING
8.33 Providing and fixing wall paneling using soft wood frame of
size 50x25 mm @ 600 mm c/c in both directions duly treated
with antitermite treatment making grooves painting of grooves
including nailing etc. complete as per specification and drawing
using :
8.33.2 12 mm thick Acoustical Board with 25 mm thick Glass wool. Sqm 1235.00
8.33.3 9 mm thick teak ply grade – I (Phenol bonded) Sqm 1622.00
8.37 Providing and fixing wooden stoppers with lugs of teak wood.
Each 13.80
8.38 Providing and fixing of Sal ballies in trusses, posts purlines and
rafters etc. with nails and spikes :
8.38.1 75 mm. Dia. Mtr. 106.00
8.39 Providing and fixing channel pipe and rollers for making
arrangement of sliding of doors complete in all respects. Mtr. 265.00
8.43 Providing and fixing Ghana teak wood plain lining tongued and
grooved on and including wooden plugs complete with
necessary screws and priming coat on un exposed surface.
8.43.1 40 mm thick. Sqm 4386.00
8.48 Providing and fixing skirting of pre laminated with (one side
decorative and other side balancing lamination) flat pressed, 3
layer graded particle board (M\medium density) Grade-I, Type
II, IS:12823 marked, with necessary fixing arrangements and
screws including drilling necessary holes for rawl plugs etc. and
priming coat on un exposed surface complete :
8.51 Providing and fixing nickel plated M.S. pipe curtain rods with
nickel plated brackets.
8.51.1 20 mm dia (Heavy type) Mtr. 86.00
8.51.2 25 mm dia (Heavy type) Mtr. 92.00
Sqm 1880.00
8.55 Providing and fixing 30mm thick FACTORY MADE SOLID
BOTH SIDE PRELAM PANEL PVC DOOR SHUTTER
consisting of frame made out of M.S. tubes of 19 gauge
thickness and size of 19mmx19mm for stiles top & bottom rails
M.S. frame shall have a coat of sheet primers of approved make
and manufacture. M.S. frame covered with 5mm thick heat
moulded prelim PVC 'C' channel of size 30mm thickness 70mm
width out of which 50mm shall be flat and 20mm shall be
tapered in 45' angle on either side forming stiles and 5mm thick
95mm wide Rajshri Prelam PVC sheet out of which 75mm shall
be flat and 20mm shall be tapered in 45' on the Inner side to
from top and bottom rail and 115mm wide Rajshri Prelam PVC
sheet out of which 75mm shall be flat and 20mm shall be
tapered on both sides to form lock rail. Top, bottom and lock
rails shall be provided either side of the panel, 10mm (5mmx2)
thick, 20mm wide cross PVC sheet shall be provided as gap
insert for top rail and bottom rail. Pannelling of 5mm thick both
side Prelam PVC sheet to be fitted in the M.S. frame
welded/sealed to stile
B-92
Chapter
Description Unit Rate (Rs.)
Code No
Sqm 1097.00
8.58 Providing & fixing wall panelling using 4mm thick self
designed decorative imported hard panel board of different
shade and patterns with using metalic designer
sheet/Aluminium composite panel and designer mica as
requirement of design of wall panneling and approved design
8mm thick water proof ply on frame work of 25x50mm Kali
wood baten work at to be treated with two coats of antitermite
paint the frame work to be supported frame the coating well
with 35x35mm. Angle hold fast two coats of red oxide primer
including decorative teak lipping corner patti, moulding
painting, melamine polishing complete with all respect as per
instruction of Engineer-in-charge.
Sqm 3538.00
8.59 Supply and Fixing S.S. Wire basket of approved make for
modular kitchen
Plain Basket
(a)
(i)
Size- 530x505x100 mm Each 1375.00
(ii) Size- 425x505x100 mm Each 1200.00
(iii) Size- 530x505x150 mm Each 1890.00
(iv) Size- 425x505x150 mm Each 1650.00
(v) Size- 530x505x200 mm Each 2230.00
(vi) Size- 425x505x200 mm Each 1940.00
(b)
Cup & Saucer/Partition/Plate Basket
(i)
Size- 530x505x150 mm Each 2290.00
(ii) Size- 425x505x150 mm Each 2100.00
(c)
Thali Basket
(i)
Size- 530x505x200 mm Each 2750.00
(ii)
Size- 425x505x200 mm Each 2395.00
(d)
Perforated Cutlery Basket
(i)
Size- 530x505x100 mm Each 2980.00
(ii)
Size- 425x505x100 mm Each 2590.00
8.61 Supply and Fixing S.S. Soft Close Auto hinge of appd make for
cabinet shutters
Each 50.00
8.62 Supply and Fixing S.S. Handle of appd make and design for
wardrobe/cabinet shutters
(i) Size 100 mm Each 50.00
(ii) Size 150 mm Each 75.00
8.6 Providing and fixing fully paneled double leaf shutter for doors as per approved design and drawing Note :- Thickness of wooden panels Grade-I of respective Wood (col. No.4) shall be as under.
with approved ordinary C.P./oxidized steel fittings as per Annexure – A’ and width of styles & top rails Thickness of Doors (mm) 25 30 35 40 45 50
of 100mm and lock rails width of 150mm and bottom rails of 200mm width including teak wood Thickness of Panel (mm) 10 12 12 16 16 20
beading of size 19mmx12mm on both faces complete IS 1003 (Part-I) 2003 :
8.6.1 25 mm thick
(A) Nigeria teak wood grade - I Sqm. 2743.00 - 2906.00 - - 2692.00 - 2655.00 2554.00 2493.00 2835.00
(B) Ghana teak wood grade - I Sqm. 2888.00 - 3015.00 - - 2801.00 - 2765.00 2663.00 2602.00 2944.00
(C) Sheesham wood grade - I Sqm. 1802.00 - 2195.00 - - 1981.00 - 1945.00 1843.00 1783.00 2124.00
(D) Hollock wood grade - I Sqm. 2164.00 - 2469.00 - - 2255.00 - 2218.00 2117.00 2056.00 2398.00
8.6.2 30 mm thick
(A) Nigeria teak wood grade - I Sqm. 3098.00 3280.00 3154.00 2897.00 3029.00 2941.00 2958.00 2904.00 2803.00 2742.00 3173.00 3083.00
(B) Ghana teak wood grade - I Sqm. 3272.00 3400.00 3284.00 3027.00 3159.00 3071.00 3088.00 3034.00 2933.00 2872.00 3303.00 3213.00
(C) Sheesham wood grade - I Sqm. 1964.00 2435.00 2309.00 2052.00 2184.00 2095.00 2113.00 2059.00 1957.00 1896.00 2328.00 2238.00
(D) Hollock wood grade - I Sqm. 2401.00 2760.00 2635.00 2377.00 2509.00 2421.00 2438.00 2384.00 2283.00 2222.00 2653.00 2563.00
8.6.3 35 mm thick
(A) Nigeria teak wood grade - I Sqm. 3347.00 3528.00 3403.00 3145.00 3278.00 3189.00 3206.00 3152.00 3051.00 2990.00 3421.00 3332.00
(B) Ghana teak wood grade - I Sqm. 3541.00 3652.00 3543.00 3296.00 3428.00 3340.00 3357.00 3303.00 3202.00 3141.00 3558.00 3480.00
(C) Sheesham wood grade - I Sqm. 2078.00 2548.00 2423.00 2165.00 2298.00 2209.00 2226.00 2172.00 2071.00 2010.00 2441.00 2352.00
(D) Hollock wood grade - I Sqm. 2567.00 2926.00 2800.00 2543.00 2675.00 2586.00 2604.00 2550.00 2448.00 2387.00 2819.00 2729.00
B-67
Ch. Description Unit Wood grade-I 12 mm thick 9 mm thick 12 mm thick 12 mm thick 9 mm thick 12 mm thick 9 mm thick 4 mm thick Wire gauge 24 12 mm thick 9 mm thick
shuttering
Code panels teak ply (both teak ply particle shuttering ply commercial commercial plain glass gauge 14 mesh of teak ply teak teak
ply
No. faces panels) (both faces board panels (both faces (both faces ply ply panels IS designation 85 (one face ply
panels) (Urea boned) panels) panels) (both faces (both faces gauge wires of panels) (one face
panels) panels) dia 0.56 mm panels)
(Urea (Urea panels
bonded) bonded)
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
8.6.4 40 mm thick
(A) Nigeria teak wood grade - I Sqm. 3825.00 3777.00 - 3394.00 3526.00 - 3455.00 - 3299.00 3238.00 3670.00 -
(B) Ghana teak wood grade - I Sqm. 4052.00 3904.00 - 3565.00 3686.00 - 3624.00 - 3471.00 3410.00 3810.00 -
(C) Sheesham wood grade - I Sqm. 2346.00 2662.00 - 2279.00 2412.00 - 2340.00 - 2185.00 2124.00 2555.00 -
(D) Hollock wood grade - I Sqm. 2915.00 3091.00 - 2708.00 2841.00 - 2769.00 - 2614.00 2553.00 2984.00 -
8.6.5 45 mm thick
(A) Nigeria teak wood grade - I Sqm. 4073.00 4025.00 - - 3774.00 - 3703.00 - 3548.00 - 3918.00 -
(B) Ghana teak wood grade - I Sqm. 4304.00 4156.00 - - 3938.00 - 3876.00 - 3740.00 - 4062.00 -
(C) Sheesham wood grade - I Sqm. 2460.00 2776.00 - - 2525.00 - 2454.00 - 2299.00 - 2669.00 -
(D) Hollock wood grade - I Sqm. 3081.00 3257.00 - - 3006.00 - 2935.00 - 2780.00 - 3150.00 -
8.6.6 50 mm thick
(A) Nigeria teak wood grade - I Sqm. 4500.00 2632.00 - - 2414.00 - 2352.00 - 2257.00 - 2538.00 -
(B) Ghana teak wood grade - I Sqm. 4735.00 4407.00 - - 4189.00 - 4127.00 - 4009.00 - 4313.00 -
(C) Sheesham wood grade - I Sqm. 2655.00 2890.00 - - 2639.00 - 2568.00 - 2413.00 - 2783.00 -
(D) Hollock wood grade - I Sqm. 3188.00 3422.00 - - 3172.00 - 3100.00 - 2945.00 - 3315.00 -
B-71
8.9 Providing and fixing partly paneled and partly glazed with 4 mm thick plane glass double leaf shutter for Note :- Thickness of wooden panels Grade-I of respective Wood (col. No.4) shall be as under.
doors as per approved design and drawings with approved ordinary C.P./ oxidized steel fittings as per Thickness of Doors (mm) 25 30 35 40 45 50
Annexure - ‘A’ and width of style and top rails of 100 mm and lock rail width of 150mm and bottom Thickness of Panel (mm) 10 12 12 16 16 20
rails of 200 mm width including teak wood beading of size 19 mm x 12 mm on both faces complete IS
1003 (Part-I) 2003 :
Ch. Description Unit Wood grade-I 12 mm thick 9 mm thick 12 mm thick 12 mm thick 9 mm thick 12 mm thick 9 mm thick 4 mm thick Wire gauge 24 12 mm thick 9 mm thick
shuttering
Code panels teak ply teak ply particle shuttering commercial commercial plain glass gauge 14 teak ply teak teak
ply
No. (both faces (both faces board panels ply (both faces ply ply panels mesh of IS (one face ply
panels) panels) (Urea boned) (both faces panels) (both faces (both faces designation panels) (one face
panels) panels) panels) 85 gauge wires panels)
(Urea (Urea of dia 0.56 mm
bonded) bonded) panels
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
8.9.1 25 mm thick.
(A) Nigeria teak wood grade - I Sqm. 2680.00 - 2789.00 - - 2646.00 - 2622.00 - - - 2742.00
(B) Ghana teak wood grade - I Sqm. 2813.00 - 2898.00 - - 2755.00 - 2731.00 - - - 2851.00
(C) Sheesham wood grade - I Sqm. 1816.00 - 2078.00 - - 1935.00 - 1911.00 - - - 2031.00
(D) Hollock wood grade - I Sqm. 2148.00 - 2352.00 - - 2209.00 - 2185.00 - - - 2305.00
8.9.2 30 mm thick.
(A) Nigeria teak wood grade - I Sqm. 2999.00 3121.00 3037.00 2866.00 2953.00 2895.00 2906.00 2870.00 - - 3050.00 2990.00
(B) Ghana teak wood grade - I Sqm. 3159.00 3251.00 3167.00 2996.00 3083.00 3025.00 3036.00 3000.00 - - 3180.00 3120.00
(C) Sheesham wood grade - I Sqm. 1962.00 2276.00 2192.00 2021.00 2108.00 2049.00 2061.00 2025.00 - - 2205.00 2145.00
(D) Hollock wood grade - I Sqm. 2362.00 2601.00 2517.00 2346.00 2433.00 2375.00 2386.00 2351.00 - - 2530.00 2470.00
8.9.3 35mm thick.
(A) Nigeria teak wood grade - I Sqm. 3248.00 3370.00 3286.00 3114.00 3202.00 3143.00 3154.00 3119.00 - - 3298.00 3238.00
(B) Ghana teak wood grade - I Sqm. 3428.00 3520.00 3436.00 3265.00 3352.00 3294.00 3305.00 3269.00 - - 3449.00 3389.00
(C) Sheesham wood grade - I Sqm. 2076.00 2390.00 2306.00 2134.00 2222.00 2163.00 2175.00 2139.00 - - 2318.00 2259.00
(D) Hollock wood grade - I Sqm. 2528.00 2767.00 2683.00 2512.00 2599.00 2540.00 2552.00 2516.00 - - 2696.00 2636.00
B-72
Ch. Description Unit Wood 12 mm thick 9 mm thick 12 mm thick 12 mm thick 9 mm thick 12 mm thick 9 mm thick 4 mm thick Wire gauge 24 12 mm thick 9 mm thick
shuttering
Code grade-I teak ply teak ply particle shuttering commercial commercial plain glass gauge 14 teak ply teak teak
ply
No. panels (both faces (both faces board panels ply (both faces ply ply panels mesh of IS (one face ply
panels) panels) (Urea boned) (both faces panels) (both faces (both faces designation panels) (one face
panels) panels) panels) 85 gauge wires panels)
(Urea (Urea of dia 0.56 mm
bonded) bonded) panels
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
8.9.4 40 mm thick.
(A) Nigeria teak wood grade - I Sqm. 3650.00 3618.00 - 3363.00 3450.00 - 3403.00 - - - 3547.00
(B) Ghana teak wood grade - I Sqm. 3858.00 3779.00 - 3534.00 3621.00 - 3574.00 - - - 3716.00
(C) Sheesham wood grade - I Sqm. 2292.00 2504.00 - 2248.00 2336.00 - 2289.00 - - - 2432.00
(D) Hollock wood grade - I Sqm. 2815.00 2933.00 - 2677.00 2765.00 - 2717.00 - - - 2861.00
8.9.5 45 mm thick.
(A) Nigeria teak wood grade - I Sqm. 3899.00 3866.00 - - 3698.00 - 3651.00 - - - 3795.00
(B) Ghana teak wood grade - I Sqm. 4127.00 4031.00 - - 3886.00 - 3843.00 - - - 3968.00
(C) Sheesham wood grade - I Sqm. 2406.00 2617.00 - - 2450.00 - 2402.00 - - - 2546.00
(D) Hollock wood grade - I Sqm. 2981.00 3098.00 - - 2930.00 - 2883.00 - - - 3027.00
8.9.6 50 mm thick.
(A) Nigeria teak wood grade - I Sqm. 3816.00 2507.00 - - 2362.00 - 2320.00 - - - 2444.00
(B) Ghana teak wood grade - I Sqm. 4501.00 4282.00 - - 4137.00 - 4095.00 - - - 4219.00
(C) Sheesham wood grade - I Sqm. 2575.00 2731.00 - - 2563.00 - 2516.00 - - - 2660.00
(D) Hollock wood grade - I Sqm. 3107.00 3264.00 - - 3096.00 - 3049.00 - - - 3192.00
B-75
8.12 Providing and fixing fully paneled double leaf shutters for windows and ventilators as per approved Note :- Thickness of wooden panels Grade-I of respective Wood (col. No.4) shall be as under.
design and drawings with approved steel fittings as per Annexure ‘A’ and width of styles, bottom and Thick ness of Doors (mm) 25 30 35 40 45 50
top rails 75 mm including beading of 25mm x 15mm size on both faces IS 1003 (Part-II) 1994. Thickness of Panel (mm) 10 12 12 16 16 20
Ch. Description Unit Wood 12 mm thick 9 mm thick 12 mm thick 12 mm thick 9 mm thick 12 mm thick 9 mm thick 4 mm thick Wire gauge 24 12 mm thick 9 mm thick
shuttering
Code grade-I teak ply (both teak ply (both particle shuttering ply commercial commercial plain glass gauge 14 mesh of teak ply teak teak
ply (both
No. panels faces panels) faces panels) board panels (both faces faces panels) ply ply panels IS designation 85 (one face ply
(Urea boned) panels) (both faces (both faces gauge wires of panels) (one face
panels) panels) dia 0.56 mm panels)
(Urea (Urea panels
bonded) bonded)
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
8.12.1 25 mm thick.
(A) Nigeria teak wood grade - I Sqm. 2612.00 - 2707.00 - - 2484.00 - 2447.00 2343.00 - 2725.00 2633.00
- - - - -
(B) Ghana teak wood grade - I Sqm. 2652.00 - 2707.00 - - 2484.00 - 2447.00 2343.00 - 2725.00 2633.00
- - - - -
(C) Sheesham wood grade - I Sqm. 1718.00 - 2072.00 - - 1849.00 - 1812.00 1708.00 - 2090.00 1998.00
(D) Hollock wood grade - I Sqm. 2370.00 -- 2663.00 -- -- 2407.00 -- 2364.00 2245.00 -- 2684.00 2578.00
8.12.2 30 mm thick.
(A) Nigeria teak wood grade - I Sqm. 3344.00 3414.00 3284.00 3017.00 3155.00 3062.00 3080.00 3025.00 2959.00 2858.00 3303.00 3210.00
(B) Ghana teak wood grade - I Sqm. 3434.00 3527.00 3378.00 3071.00 3228.00 3121.00 3143.00 3079.00 2959.00 2887.00 3398.00 3292.00
(C) Sheesham wood grade - I Sqm. 2147.00 2654.00 2505.00 2198.00 2355.00 2248.00 2270.00 2206.00 2086.00 2014.00 2525.00 2420.00
(D) Hollock wood grade - I Sqm. 2621.00 2990.00 2841.00 2533.00 2691.00 2584.00 2606.00 2542.00 2422.00 2349.00 2861.00 2755.00
8.12.3 35 mm thick.
(A) Nigeria teak wood grade - I Sqm. 3574.00 3644.00 3514.00 3247.00 3385.00 3292.00 3310.00 3255.00 3199.00 3088.00 3533.00 3440.00
(B) Ghana teak wood grade - I Sqm. 3700.00 3793.00 3643.00 3336.00 3494.00 3387.00 3409.00 3344.00 3225.00 3152.00 3664.00 3558.00
(C) Sheesham wood grade - I Sqm. 2268.00 2775.00 2625.00 2318.00 2476.00 2369.00 2391.00 2326.00 2207.00 2134.00 2646.00 2540.00
(D) Hollock wood grade - I Sqm. 2798.00 3167.00 3018.00 2711.00 2868.00 2761.00 2783.00 2719.00 2599.00 2527.00 3038.00 2933.00
B-76
Ch. Description Unit Wood 12 mm thick 9 mm thick 12 mm thick 12 mm thick 9 mm thick 12 mm thick 9 mm thick 4 mm thick Wire gauge 24 12 mm thick 9 mm thick
shuttering
Code grade-I teak ply teak ply particle shuttering commercial commercial plain glass gauge 14 teak ply teak teak
ply
No. panels (both faces (both faces board panels ply (both faces ply ply panels mesh of IS (one face ply
panels) panels) (Urea boned) (both faces panels) (both faces (both faces designation panels) (one face
panels) panels) panels) 85 gauge wires panels)
(Urea (Urea of dia 0.56 mm
bonded) bonded) panels
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
8.12.4 40 mm thick.
(A) Nigeria teak wood grade - I Sqm. 4195.00 3875.00 - 3478.00 3616.00 - 3541.00 - 3430.00 3319.00 3764.00 3671.00
(B) Ghana teak wood grade - I Sqm. 4337.00 4058.00 - 3602.00 3759.00 - 3674.00 - 3490.00 3418.00 3930.00 3824.00
(C) Sheesham wood grade - I Sqm. 2624.00 2897.00 - 2440.00 2598.00 - 2513.00 - 2329.00 2256.00 2768.00 2662.00
(D) Hollock wood grade - I Sqm. 3253.00 3343.00 - 2887.00 3044.00 - 2959.00 - 2775.00 2703.00 3214.00 3108.00
8.12.5 45 mm thick.
(A) Nigeria teak wood grade - I Sqm. 4426.00 4106.00 - 3709.00 3847.00 - 3772.00 - 3661.00 - 3995.00 3902.00
(B) Ghana teak wood grade - I Sqm. 4602.00 4324.00 - 3867.00 4025.00 - 3940.00 - 3756.00 - 4195.00 4089.00
(C) Sheesham wood grade - I Sqm. 2746.00 3019.00 - 2562.00 2720.00 - 2635.00 - 2451.00 - 2890.00 2784.00
(D) Hollock wood grade - I Sqm. 3430.00 3520.00 - 3064.00 3221.00 - 3136.00 - 2952.00 - 3391.00 3286.00
8.12.6 50 mm thick.
(A) Nigeria teak wood grade - I Sqm. 4863.00 4326.00 - 3929.00 4067.00 - 3992.00 - 3881.00 - 4215.00 4122.00
(B) Ghana teak wood grade - I Sqm. 5105.00 4589.00 - 4132.00 4290.00 - 4204.00 - 4020.00 - 4460.00 4354.00
(C) Sheesham wood grade - I Sqm. 2969.00 3141.00 - 2684.00 2842.00 - 2757.00 - 2573.00 - 3012.00 2906.00
(D) Hollock wood grade - I Sqm. 3755.00 3697.00 - 3241.00 3398.00 - 3313.00 - 3129.00 - 3568.00 3463.00
B-77
8.13Providing and fixing partly paneled and partly glazed with 4 mm plain glass double leaf shutters for Note :- Thickness of wooden panels Grade I of respective Wood (Col. No. 4) shall be as under.
windows and ventilators as per approved design and drawings with approved steel fittings as per Thick ness of Doors (mm) 25 30 35 40 45 50
Annexure ‘A’ and width of styles, bottom and top rails 75 mm including intermediate rails 50 mm wide, Thickness of Panel (mm) 10 12 12 16 16 20
beading of 25mm x 15mm size on both faces IS 1003 (Part-II) 1994 :
Ch. Description Unit Wood 12 mm thick 9 mm thick 12 mm thick 12 mm thick 9 mm thick 12 mm thick 9 mm thick 4 mm thick Wire gauge 24 12 mm thick 9 mm thick
shuttering
Code grade-I teak ply (both teak ply particle shuttering commercial commercial plain glass gauge 14 teak ply teak teak
ply
No. panels faces panels) (both faces board panels ply (both faces ply ply panels mesh of IS (one face ply
panels) (Urea boned) (both faces panels) (both faces (both faces designation panels) (one face
panels) panels) panels) 85 gauge wires panels)
(Urea (Urea of dia 0.56 mm
bonded) bonded) panels
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
8.13.1 25 mm thick.
(A) Nigeria teak wood grade - I Sqm. 2900.00 - 2948.00 - - 2800.00 - 2774.00 - - 2961.00 -
(B) Ghana teak wood grade - I Sqm. 2931.00 - 2974.00 - - 2803.00 - 2774.00 - - 2988.00 -
(C) Sheesham wood grade - I Sqm. 1972.00 - 2244.00 - - 2072.00 - 2044.00 - - 2257.00 -
(D) Hollock wood grade - I Sqm. 2329.00 - 2524.00 - - 2353.00 - 2324.00 - - 2538.00 -
8.13.2 30 mm thick
(A) Nigeria teak wood grade - I Sqm. 3219.00 3266.00 3179.00 3001.00 3093.00 3031.00 3043.00 3006.00 - - 3192.00 3130.00
(B) Ghana teak wood grade - I Sqm. 3275.00 3337.00 3238.00 3034.00 3138.00 3067.00 3082.00 3038.00 - - 3252.00 3181.00
(C) Sheesham wood grade - I Sqm. 2126.00 2464.00 2366.00 2161.00 2266.00 2194.00 2209.00 2165.00 - - 2379.00 2308.00
(D) Hollock wood grade - I Sqm. 2554.00 2800.00 2701.00 2497.00 2601.00 2530.00 2545.00 2501.00 - - 2715.00 2644.00
8.13.3 35 mm thick
(A) Nigeria teak wood grade - I Sqm. 3449.00 3496.00 3409.00 3231.00 3323.00 3261.00 3273.00 3236.00 - - 3422.00 3360.00
(B) Ghana teak wood grade - I Sqm. 3541.00 3603.00 3504.00 3299.00 3404.00 3333.00 3348.00 3304.00 - - 3518.00 3447.00
(C) Sheesham wood grade - I Sqm. 2247.00 2585.00 2486.00 2282.00 2386.00 2315.00 2330.00 2286.00 - - 2500.00 2429.00
(D) Hollock wood grade - I Sqm. 2731.00 2977.00 2878.00 2674.00 2778.00 2707.00 2722.00 2678.00 - - 2892.00 2821.00
B-78
Ch. Description Unit Wood 12 mm thick 9 mm thick 12 mm thick 12 mm thick 9 mm thick 12 mm thick 9 mm thick 4 mm thick Wire gauge 24 12 mm thick 9 mm thick
shuttering
Code grade-I teak ply teak ply particle shuttering commercial commercial plain glass gauge 14 teak ply teak teak
ply
No. panels (both faces (both faces board panels ply (both faces ply ply panels mesh of IS (one face ply
panels) panels) (Urea boned) (both faces panels) (both faces (both faces designation panels) (one face
panels) panels) panels) 85 gauge wires panels)
(Urea (Urea of dia 0.56 mm
bonded) bonded) panels
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
8.13.4 40 mm thick
(A) Nigeria teak wood grade - I Sqm. 3940.00 3727.00 - 3462.00 3554.00 - 3504.00 - - - - 3591.00
(B) Ghana teak wood grade - I Sqm. 4055.00 3869.00 - 3565.00 3670.00 - 3613.00 - - - - 3712.00
(C) Sheesham wood grade - I Sqm. 2525.00 2707.00 - 2404.00 2508.00 - 2452.00 - - - - 2551.00
(D) Hollock wood grade - I Sqm. 3094.00 3154.00 - 2849.00 2954.00 - 2898.00 - - - - 1832.00
8.13.5 45 mm thick.
- - - - - -
(A) Nigeria teak wood grade - I Sqm. 4171.00 3958.00 3693.00 3785.00 3735.00 3822.00
- - - - - -
(B) Ghana teak wood grade - I Sqm. 4321.00 4134.00 3831.00 3935.00 3879.00 3978.00
- - - - - -
(C) Sheesham wood grade - I Sqm. 2647.00 2829.00 2525.00 2630.00 2574.00 2673.00
- - - - - -
(D) Hollock wood grade - I Sqm. 3271.00 3330.00 3027.00 3131.00 3075.00 3174.00
8.13.6 50 mm thick
(A) Nigeria teak wood grade - I Sqm. 4536.00 4178.00 - 3913.00 4005.00 - 3955.00 - - - - 4042.00
(B) Ghana teak wood grade - I Sqm. 4744.00 4399.00 - 4095.00 4200.00 - 4143.00 - - - - 4242.00
(C) Sheesham wood grade - I Sqm. 2837.00 2951.00 - 2647.00 2752.00 - 2696.00 - - - - 2795.00
(D) Hollock wood grade - I Sqm. 3547.00 3508.00 - 3204.00 3309.00 - 3252.00 - - - - 3351.00
B-96
CHAPTER No. B-9
Chapter
Description Unit Rate (Rs.)
Code No
Kg. 68.00
9.6 Add extra over item No. 9.1 to 9.5 for hoisting and fixing
for every additional one metre or part thereof beyond 4.5
mtr. height.
Kg. 1.00
Kg. 82.00
B-98
Chapter
Description Unit Rate (Rs.)
Code No
9.15 Providing and fixing frame for doors and windows of EZ-
7 ISI marks section welded at corners and dully painted
with red oxide paint, frame to be fixed by MS flat
230x16x3mm size holdfast embedded in cement concrete
M-100 (1:3:6) block size 230x115x75mm with oxidized
iron 100 mm round hinges screwed and welded complete
in all respect as per design with priming coat of red
oxide.
Kg. 99.00
Kg. 94.00
B-99
Chapter
Description Unit Rate (Rs.)
Code No
9.17 Add extra over item No. 9.16 for fixing hand railing in
lead (weight of lead to be paid).
Kg. 144.00
9.19 Providing and fixing steel gate grating and grills made of
angles, tees, square bars or other flats black pipe with
holdfast and fittings complete as per design and drawing
including cutting welding and fabrication with priming
coat of red oxide.
Kg. 91.00
Sqm 2915.00
9.22.1 Using M.S. angles 40x40x6mm for diagonal braces. Sqm 2790.00
9.22.2 Using M.S. angles 35x35x5mm for diagonal braces. Sqm 2409.00
Sqm 1662.00
B-101
Chapter
Description Unit Rate (Rs.)
Code No
9.25.1 Exceeding 10.0 Sqm and upto 16.80 Sqm in the aera
Sqm 499.00
9.26.6 Add extra over item no. 9.21, 9.22, 9.23, 9.26 for using
G.I. sheet instead of MS sheet
Sqm 128.00
B-102
Chapter
Description Unit Rate (Rs.)
Code No
Sqm 602.00
B-104
Chapter
Description Unit Rate (Rs.)
Code No
Sqm 320.00
Each. 53.00
9.35 Providing and fixing bright finished brass peg stays 300
mm long of minimum weight 330 grams to side hung
steel windows with necessary welding and machine
screws etc. complete.
Each. 76.00
Each. 37.00
9.38 Providing and fixing steel windows or ventilators with
openable wire gauge shutters of standard rolled sections
shutters of standard rolled sections confirming to I.S.
1038 (revised) joints welded i.e. Providing & fixing fly
screen of 14 mesh x 24 gauge with suitable screws to the
body by metal beading 20 x 3mm complete with
projecting hinges, bars, handles, lugs with a priming coat
of red oxide paint.
Sqm 1911.00
9..39 Deduct from item Nos. 9.28 & 9.38 if section used is not
as per I.S. 1038 (revised).
30%
Sqm 1884.00
9.44 Providing and fixing M.S. round holding bolts with nuts
as washers complete.
Kg. 64.00
Sqm 2703.00
B-107
Chapter
Description Unit Rate (Rs.)
Code No
Sqm 2059.00
Sqm 2751.00
9.53 Prepainted (steel with base metal as per IS:513 with 120
GSM of Zinc phosphating and 20 mic of prime and
polisher base paint of approved shade and colour)
galvanized rolled frame section mechanically assembled
glazed doors with hinged or any other approved
arrangements for opening, approved type of stayed, P/F 5
mm, thick plain glass sheets with prepainted neosprin
beading as the case may be, weather stripping with
EPDM air tight gasket lining fixed around glass and
around panel frame including fixing standard approved
standard hinges, handles, locks etc. where ever required
as per detailed drawings of Rajasthan Vidhan Sabha
Bhawan Project Jaipur, including protecting the windows
frame during execution. The windows / ventilators shall
be made out of CRCA material.
FENCING WORK
9.55 180 Cm. high fencing with angle iron post 55x55x6mm
placed at every 3 Mtr. apart 45Cm. in ground embedded
in cement concrete 1:3:6 (30x30x60 Cm.) corner and
every tenth post to be strutted with 55x55x6mm. angle
iron provided with 6 horizontal lines and two diagonals
of black barbed wire between two posts fitted and fixed
with G.I. staples including earth work in excavation etc.
complete.
Mtr. 449.00
9.57 120 Cm. high fencing with angle iron posts 50x50x6mm
placed at every 3 Mtr. apart 30 Cm. in ground embedded
in cement concrete 1:3:6 (30x30x45 Cm.) corner & every
tenth posts to be strutted with 50x50x6mm angle iron
provided with three horizontal lines and two diagonals of
black barbed wire between two posts fitted and fixed
with G.I. staple including earth work in excavation etc.
complete.
Mtr. 275.00
B-110
Chapter
Description Unit Rate (Rs.)
Code No
Mtr. 228.00
9.59 Add or deduct for each wire line on item No. 9.55 to
9.58
Mtr. 10.00
9.61 Add for using galvanized barbed wire instead of black Mtr. Each
barbed wire. wire
2.00
Sqm 4302.00
9.64 Supply & fixing of stainless steel pipe railing for ramp
railing height, 90 cm. with 40 mm dia stainless steel pipe
with 18 gauge with drop (vertical post) at 90 cm. C/C
and intermidiate horizontal pipe with suitable height of
same size and gauge with coupling, grinding and
polishing & fix of master pieces as per required point as
per approved design of Engineer incharge.
Mtr. 2493.00
ROOFING
1 Rates are fro complete item of work and are inclusive
of al centering, shuttering, curing and finishing
including all leads and delivery of material at site of
work with all lead and lift.
2 The rates for A.C. and G.I. sheet roofing are inclusive
of all necessary, overlaps and wastage in cutting and
all standard crews nuts washers bolts and nuts ‘J’ or
‘L’ hooks etc. required as per specifications.
Chapter
Description Unit Rate (Rs.)
Code No
10.3 Deduct from item No. 10.1 for Ralthal not to be done.
Sqm 191.00
10.4 Deduct from item No. 10.1 for cement flush pointing
is done instead of cement plaster 1:4 Sqm 40.00
10.15.2 Above 2.00 Mtr. And upto 2.50 Mtr. Sqm 60.00
10.15.3 Above 2.50 Mtr. And upto 3.00 Mtr. Sqm 65.00
10.15.4 Above 3.00 Mtr. And upto 3.30 Mtr. Sqm 70.00
Sqm 194.00
10.19 Providing & Laying sandla coat over roof with lime
putty. Sqm 8.00
10.23 Add extra over item No. 10.25 for providing and
fixing CGI sheets vertically or to a pitch exceeding
600 Sqm 5.75
10.24 Add extra over item No. 10.25 for providing and
fixing CGI sheets in curved roofing. Sqm 8.00
10.26 Extra for Circular cutting in CGI sheet roofing for Per Mtr
making opening of area exceeding 40 dm2 . perimeter 61.00
10.34 P&F wind ties of reqd. flat iron section incl. making
holes as reqd. duly painted with red oxide paint
complete. Kg. 33.00
10.36.6 Curved barge boards for North light curve. Each 126.00
FALSE CEILING
10.37 Providing and fixing chir wood frame work for false
ceiling of net work of 600 mm x 600 mm
approximately of batten size 60mmx60mm as main
rafters and 50x25 mm as secondary rafters with 10
mm dia M.S. hangers at suitable intervals, including
coating of anti-termite treatment and fixing in wall
etc. complete in all respect :
Sqm 373.00
Sqm. 824.00
10.43 Add extra over item No. 10.45 if Mangalore tiles are
used in place of country tiles. Sqm 83.00
Sqm 285.00
FLOORING
NOTE :
1 The rates for al items include all from work, laying,
curing and finishing etc. The rates are for complete
work at site,, inclusive of all leads.
2 The rates cover the protection and cleaning for all
places.
3 For marble granite and ceramic tile works refer to
Chapter No. B-7.
4 No marble powder to be used in marble chips/ crazy/
terrazzo / mosaic flooring work.
Chapter
Description Unit Rate (Rs.)
Code No
BRICK FLOORING
11.1 Brick on edge flooring with bricks of class
designation 75 including pointing in CM (1:3)
complete laid on 12 mm thick bed of IS 5766-1970:
Sqm 416.00
B-127
Chapter
Description Unit Rate (Rs.)
Code No
11.9 Add or deduct over item No. 11.8 for using more or Per Sqm/Kg
less than 3.5 Kg. of red oxide of iron per 50 Kg. of extra/less of
cement in 40 mm thick red oxide flooring. red oxide of
iron used for
each 50 Kg of
cement. 14.00
11.11 Add or deduct over item No. 11.10 for using more or Sqm per Kg.
extra / less of
less than 3.5 Kg. of red oxide of iron per 50 Kg. of
red oxide of
cement in 18 mm or 21 mm thick red oxide plaster iron used for
skirting/dado. each 50 Kg. of
cement. 10.00
TERRAZO FLOORING
11.23 Add extra over item No. 11.15 to 11.18 for terrazzo
flooring laid as floor border margins and similar
bands exceeding 7.5cm. but not exceeding 30 Cm. in
width. Sqm 17.00
11.24 Add extra over item No. 11.15 to 11.18 for terrazzo
flooring on stair case treads not exceeding 30 mm in
width including cost of forming of nosing etc.
Sqm 25.00
11.25 Add extra over item No. 11.15 to 11.18 for terrazzo
flooring in narrow band bands not exceeding 7.5cm.
in width. Sqm 2.00
11.28.3 Add extra if fine edge cut regular shape crazy is done
Sqm 15.00
TILE FLOORING
11.37.2 25 mm thick slab area upto 901 to 2000 Sq.Cm. Sqm 690.00
11.37.4 Deduct from Item No.11.35 & 11.37 for using Kota
stone other than blue in colour Sqm 45.00
11.44 Random rubble dry stone Kharanja under floor. Cum 683.00
PVC FLOORING
11.50.4 2.0 mm thick PVC Tile fully flexible vinyle flooring. Sqm 294.00
11.52.2 Using above 10% and upto 15% marble stone Sqm 34.00
11.52.3 Using above 15% and upto 20% marble stone Sqm 45.00
B-139
Chapter
Description Unit Rate (Rs.)
Code No
WOODEN FLOORING
Sqm 802.00
NOTE :
1 The rates for complete work including racking of
joints, curing, grinding, mixing and finishing T &
P and scaffolding material and cost of material
with all lead and lift upto 3 floor levels.
Chapter
Description Unit Rate (Rs.)
Code No
LIME PLASTER
12.1 Lime plaster on new surface on walls with lime
surkhi mortar 1:2 (1-lime putty :2-surkhi)
including raking of joints, curing etc. complete
IS 2394-1984:
CEMENT PLASTER
12.13 Add extra over item No. 12.7 to 12.10 for water
proofing compound if used @ 2 % of the cement
by weight.
Kg. 31.00
12.14 Add extra over item No. 12.1 to 12.12 for repair
to plaster including cutting the patch in a uniform
shape, racking preparing surface of wall,
complete in all respect. Sqm 18.00
12.19 Add extra item No. 12.1 to 12.12 for plaster over
spherical or groin ceiling. Sqm 25%
Sqm 151.00
MISCELLANEOUS
Sqm 133.00
12.29 Add extra over item No. 12.1 to 12.12 for plaster
work on exterior wall of height more than 4.5M.
from plinth level of every additional height of 4.5
Mtr. or part thereof.
Sqm 10%
SUPERIOR PLASTER
POINTING
DISTEMPER
CEMENT PAINT
Sqm 91.00
B-161
CHAPTER No. B-13
Chapter
Description Unit Rate (Rs.)
Code No
13.10 Lime plaster 1:2 under old stone slab with admixture
of gugal gur etc. in three coats including dressing
cutting of joints of slab complete.
13.20 Refixing old glass panes with putty and nails. Sqm 113.00
13.24 Cutting jhiri for fixing slab and making good. Mtr. 93.00
B-164
Chapter
Description Unit Rate (Rs.)
Code No
Sqm 1459.00
Sqm 1511.00
B-166
Chapter
Description Unit Rate (Rs.)
Code No
13.38 Add for addition day for barricading work in all type
of surfaces
Mtr/Day 10.00
B-167
CHAPTER No. B-14
Chapter
Description Unit Rate (Rs.)
Code No
Chapter
Description Unit Rate (Rs.)
Code No
Chapter
Description Unit Rate (Rs.)
Code No
Chapter
Description Unit Rate (Rs.)
Code No
Chapter
Description Unit Rate (Rs.)
Code No
Chapter
Description Unit Rate (Rs.)
Code No
Chapter
Description Unit Rate (Rs.)
Code No
14.47 Taking out C.I. cover with frame from stone slab /
RCC slab of inspection chambers of various sizes
including dismantling of stone slab / RCC slab
roofing and stacking of useful materials near the
side and disposal of unserviceable materials
within 50 meter lead. Each 214.00
B-174
Chapter
Description Unit Rate (Rs.)
Code No
14.48 Taking out C.I. cover with frame from stone slab /
RCC slab of manholes of various sizes including
dismantling of stone slab RCC slab roofing and
stacking of useful materials near the site and
disposal of unserviceable materials within 50
meter lead. Each 124.00
Chapter
Description Unit Rate (Rs.)
Code No
Chapter
Description Unit Rate (Rs.)
Code No
Chapter
Description Unit Rate
Code No
15.9 Deduct in item No. 15.2 & 15.3 for not applying 2
coats of hot bitumen complete as per
specifications. Sqm 27.00
EXPANSION JOINT
15.12.2 Bitumen felt (glass fibre base) type 2 grade-I Sqm 225.00
B-179
Chapter
Description Unit Rate
Code No
15.21 Add extra over item No. 20., if 3rd coat is applied
for highly affected surfaces. Sqm 27.00
15.23 Add extra over item No. 22., if 3rd coat of white
rubberised water proofer is applied for highly
affected surfaces. Sqm 34.00
B-181
Chapter
Description Unit Rate
Code No
R.C.C. FRAMES
15.30 Providing and fixing in cement sand mortar 1:3
single/ double rebated R.C. Door window and
ventilator frames (chowkhats) incl. 1%
reinforcement as per design and concrete mix
1:2:4 cutting etc. complete incl. horns, and hold
fasts :
15.30.1 Size 75 x 50mm Mtr. 62.00
15.32 Add extra for item No. 15.36 for finishing the
exposed face with terrazo (Mosaic) finish. Mtr. 20%
15.37 Add extra over item Nos. 15.30, 15.32 & 15.33
for frames curved in plan Mtr. 10%
15.43 Add extra over item No. 15.42 for providing lead
caulked joint to sand cast iron accessories for rain
water pipes and fittings:
15.43.1 75mm dia pipe. Each 122.00
15.47.3 TEES
(a) 75mm without door. Each 43.00
15.47.4 SHOES
(a) 75mm dia Each 27.00
15.47.5 SOCKET
(a) 75mm dia Each 18.00
(b) 100mm dia Each 172.00
(c) 150mm dia Each 26.00
Sqm 853.00
Chapter Code
Description Unit Rate (Rs.)
No
Note : Add 10% extra over item No. 16.1 for work
done in curved/ circular shape.
B-200
Chapter Code
Description Unit Rate (Rs.)
No
Sqm 2417.00
Sqm 2138.00
Sqm 2504.00
PLASTIC WINDOWS
16.22 Providing and fixing of All plastic Openable
Windows shall be made from extruded PVC section
reinforced with steel. The corner & joints shall be
mitre cut and welded/Mechanically joint. The outer
frame and shutter frame shall be made from
extruded PVC section, having and overall cross
section of 53 x 60mm Suitable snap fit glazing and
function beads having an overall cross section of 30
x 23mm and 15 x 23mm shall be used for provision
of glass or Panel E.P.D.M. weather scals and
glazing scals and approved steel fitting with 4mm
thick plain glass complete.
Sqm 4283.00
Sqm 3331.00
B-206
Chapter Code
Description Unit Rate (Rs.)
No
PLASTIC PARTITION
16.27 Providing and fixing of all Plastic partition with
frames made from extruded PVC sections having
on overall cross section of 53 x 60mm. The frames
shall be joined by means of concealed cleats.
Suitable snap Fit glazing beads and function beads
having an overall cross section 30 x 23 mm and 15
x 23mm shall be used for provision of glass of
panels. The horizontal and vertical members duly
fixed should be spaced 1000mm to 1200mm apart. :
B-207
Chapter Code
Description Unit Rate (Rs.)
No
Sqm 1144.00
Sqm 1467.00
B-211
Chapter Code
Description Unit Rate (Rs.)
No
Sqm 2303.00
Sqm 3034.00
B-212
Chapter Code
Description Unit Rate (Rs.)
No
Mtr 385.00
Sqm 6752.00
B-217
Chapter Code
Description Unit Rate (Rs.)
No
Sqm 7620.00
B-219
Chapter Code
Description Unit Rate (Rs.)
No
INDEX
Chapter
Description Unit Rate (Rs.)
Code No
Note : Add extra over item No. 1.1 to 1.7 for using
approved light coloured vitreous china ware in
stead of white vitreous china ware. Each 50%
1.9 P&F C.P. lugs for toilet seat cover Pair 82.00
URINALS
1.15 P & F Ist quality WVC Urinal (IS:2556 mark)
with 25 mm dia G.I. waste pipe, dome
couplings, concealed iron brackets or screws
etc. complete.
1.15.1 Flat Back (small) size 440x265x315 mm. Each 820.00
1.27 P & F WVC syphon with plunger plate only. Each 228.00
1.28 P & F WVC Auto cistern with cover only. Each 502.00
WASH BASINS
1.39 P & F WVC Wash basin (Ist quality IS:2556
Mark) of approved make with C.I. brackets
duly painted 1 No. 15 mm C.P. Pillar cock
(IS:8934 Mark) & 32 mm C.P. brass waste
coupling of approved make 25 mm G.I. waste
pipe complete including cutting & making
good the wall :
1.39.1 Size 450 mm x 300 mm. Each 1616.00
1.39.8 Size 630 mm x 510 mm (with anti splash rim) Each 3254.00
S-8
Chapter
Description Unit Rate (Rs.)
Code No
1.39.11 Size 550 mm x 400 mm dia for counter top. Each 1905.00
1.39.12 Size 630 mm x 500 mm dia for counter top. Each 2371.00
MISCELLANEOUS
1.44 P & F Bottle Trap of approved make
1.50.3 C.P. brass towel rail with bracket 450 x20mm. Each 220.00
1.50.4 C.P. brass towel rail with bracket 600 x20mm. Each 250.00
S-12
Chapter
Description Unit Rate (Rs.)
Code No
Chapter
Description Unit Rate (Rs.)
Code No
2.4 Fixing water meter (IS:779: mark) and stop Each 327.00
cock in G.I. pipe line including making
chamber of approved size excluding cost of
water meter & stop cock.
2.6.4 C.P. Pillar cock, Swan-neck with casted spout, Each 1018.00
15 mm nominal bore.
Chapter
Description Unit Rate (Rs.)
Code No
2.13.2 PVC pipe with C.P. Brass nuts up to length 370 Each 44.00
mm.
2.13.3 PVC pipe with C.P. Brass nuts 450 mm. Each 56.00
2.13.4 PVC pipe with C.P. Brass nuts 600 mm. Each 61.00
2.13.5 C.P. Brass Pipe with CP Brass nuts upto length Each 50.00
300 mm.
2.13.6 C.P. Brass Pipe with CP Brass nuts upto length Each 61.00
370 mm.
2.13.7 C.P. Brass Pipe with CP Brass nuts upto length Each 72.00
450 mm.
2.13.8 C.P. Brass Pipe with CP Brass nuts upto length Each 94.00
600 mm.
2.20.2 C.P. brass spout Extra heavy with flange. Each 571.00
2.21.2 C.P. One hole/close hole basis mixer with Each 2622.00
swinging spout casted.
2.21.3 C.P. sink mixer with swinging spout J-Pipe. Each 2899.00
2.21.6 C.P. Wall mixer telephonic type crutch & Each 4141.00
telephonic shower.
2.21.7 C.P. Wall mixer telephonic type without crutch Each 3475.00
& telephonic shower.
2.21.10 C.P. Surgical basin mixer elbow action. with Each 2803.00
shower (wall type).
S-24
Chapter
Description Unit Rate (Rs.)
Code No
2.22.1 C.P. brass Tip-tone divertor bath spout with Each 1598.00
mixing valve.
2.22.5 C.P. brass two way with 22 Cm. pipe flange. Each 938.00
2.23.2 C.P. brass Bidet fittings with shower and Pop- Each 3028.00
up waste.
2.24.1 340 Litres water capacity size 90x75x60 cm. Each 550.00
2.24.2 270 Litres water capacity size 90x60x60 Cm. Each 490.00
Note : The pipes are denoted by ID OD eg. 1216=12mm inner dia x 16mm outer dia
2.34.3 Bib Cock with long thread 15 mm nominal size Each 714.00
2.34.10 Sink cock with swinging casted spout (table Each 133.00
mounted) 15mm nominal size
2.34.11 Single lever wash basin mixer with 450 mm Each 2750.00
long copper connection pipe
2.34.21 Hand shower with 8 mm dia 1 mt. long PVC Each 1683.00
tube & wall hook complete
2.34.22 C.P. Brass 40 mm with 190 & 120 mm long Each 996.00
connection pipe
(i) Shower arm 190 mm Long Light Body with Each 557.00
wall flange
Each 2675.00
Each 27723.00
Note:
1- For laying of S.W. pipes beyond 1.2m depth, earthwork & close
timbering or open timbering (as per site conditions) is to be paid
extra.
2- The rates for S.W. pipes are applicable to work executed in soils
above sub-soil water level. Extra allowance is to be made for
working under sub-soil water level.
Chapter
Code No
Description Unit Rate
3.3.1 100mm dia S.W. Pipe. Mtr 102.00 85.00 ###### Mtr 102
3.3.2 150mm dia S.W. Pipe. Mtr 165.00 90.00 ###### Mtr 165
3.3.3 200mm dia S.W. Pipe. Mtr 194.00 105.00 ###### Mtr 194
3.3.4 230mm dia S.W. Pipe. Mtr 213.00 110.00 ###### Mtr 213
3.3.5 250mm dia S.W. Pipe. Mtr 226.00 120.00 ###### Mtr 226
3.3.6 300mm dia S.W. Pipe. Mtr 261.00 125.00 ###### Mtr 261
3.3.7 350mm dia S.W. Pipe. Mtr 297.00 140.00 ###### Mtr 297
3.3.8 400mm dia S.W. Pipe. Mtr 334.00 150.00 ###### Mtr 334
3.3.9 450mm dia S.W. Pipe. Mtr 369.00 New ###### Mtr 369
S-33
Chapter
Code No
Description Unit Rate
3.7.1 100 & 150 mm dia pipe Mtr 16.00 8.00 ###### Mtr 16
3.7.2 200, 230 & 250 mm dia pipe Mtr 18.00 10.00 ###### Mtr 18
3.8.1 100mm dia Internal. Mtr 254.00 115.00 ###### Mtr 254
3.8.2 150mm dia Internal. Mtr 212.00 140.00 ###### Mtr 212
3.8.2 200mm dia Internal. Mtr 353.00 160.00 ###### Mtr 353
3.8.4 250mm dia Internal. Mtr 354.00 210.00 ###### Mtr 354
3.8.5 300mm dia Internal. Mtr 439.00 265.00 ###### Mtr 439
3.8.6 450mm dia internal Mtr 911.00 395.00 ###### Mtr 911
3.8.7 500mm dia internal Mtr 1061.00 460.00 ###### Mtr 1061
3.8.8 600mm dia internal Mtr 1384.00 600.00 ###### Mtr 1384
3.8.9 700mm dia internal Mtr 1869.00 810.00 ###### Mtr 1869
3.8.10 800mm dia internal Mtr 2169.00 940.00 ###### Mtr 2169
3.8.11 900mm dia internal Mtr 2653.00 ###### ###### Mtr 2653
S-35
Chapter
Description Unit Rate
Code No
3.10.1 75mm dia 0.88Kg pig lead Each 114.00 70.00 ###### Each 114
3.10.2 100mm dia 0.98Kg pig lead Each 130.00 80.00 ###### Each 130
3.10.3 150mm dia 1.48Kg pig lead Each 147.00 90.00 ###### Each 147
3.11.1 50mm dia With out Door Each -- 171.00 248.00 371.00 240.00 --
.
3.11.2 75mm dia With out Door Each 388.00 181.00 530.00 251.00 361.00 271.00 646.00
3.11.3 100mm dia With out Door Each 439.00 167.00 775.00 284.00 439.00 324.00 723.00
3.11.4 150mm dia With out Door Each -- 361.00 -- 1162.00 723.00 --
3.12.1 Size 100x100 mm. Each 283.00 225.00 ###### Each 283
3.12.2 Size 100x75 mm. Each 227.00 180.00 ###### Each 227
3.17.1 50mm dia Each 41.00 18.00 49.00 30.00 49.00 67.00 41.00 49.00
3.17.2 75mm dia Each 49.00 12.00 60.00 33.00 60.00 69.00 48.00 51.00
3.17.3 100mm dia Each 60.00 22.00 83.00 40.00 69.00 81.00 51.00 69.00
3.17.4 150mm dia Each 81.00 30.00 85.00 53.00 118.00 -- 81.00 109.00
3.21.1 Depth upto 0.5mtr Each 3202.00 ###### ###### Each 3202
3.22.1 Depth upto 1.5mtr Each 10949.00 ###### ###### Each FALSE
3.26.1 Inner dia 90cm & 10 to 12 mtr deep Each 2981.00 ###### ###### Each 2981
3.26.2 Inner dia 60cm & 10 to 12 mtr deep Each 2782.00 ###### ###### Each 2782
3.29.1 Size 200x100x130cm (for 10users) Each 15301.00 ###### ###### Each 15301
3.29.2 Size 230x110x150cm (for 20users) Each 20866.00 ###### ###### Each 20866
3.29.3 Size 400x140x150cm (for 50users) Each 33186.00 ###### ###### Each 33186
3.35.1 Size 500mm dia (double seal) Each 298.00 180.00 ###### Each 298
3.35.2 Size 450mm dia Each 265.00 160.00 ###### Each 265
3.35.3 Size 400mm dia Each 199.00 120.00 ###### Each 199
3.35.4 Size 600x600mm (Double seal) Each 455.00 275.00 ###### Each 455
3.35.5 Size 600x450mm Each 381.00 230.00 ###### Each 381
3.35.6 Size 450x450mm
Each 290.00 175.00 ###### Each 290
3.35.7 Size 300x300mm Each 91.00 55.00 ###### Each 91
3.35.8 Size 250x250mm
Each 75.00 45.00 ###### Each 75
3.35.9 Size 180x180mm Each 67.00 40.00 ###### Each 67
S-44
Chapter
Code No
Description Unit Rate
3.36.1 112 mm drain, 225 mm Av. depth. Mtr. 340.00 135.00 ###### Mtr. 340
3.36.2 150mm drain, 225 mm Av. depth. Mtr. 404.00 145.00 ###### Mtr. 404
3.36.3 250mm drain 300mm av. Depth Mtr. 450.00 190.00 ###### Mtr. 450
3.39.2 Upto 60mm thick Sqm 446.00 310.00 ###### Sqm 446
3.39.3 Upto 80mm thick Sqm 547.00 380.00 ###### Sqm 547
3.40 Construction of Cement concrete
chamber 125mm dia.
3.40.1 CP Brass grating Each 115.00 80.00 ###### Each 115
3.40.2 CP Brass doom grating Each 122.00 85.00 ###### Each 122
3.40.4 Stainless Steel sheet grating Each 115.00 80.00 ###### Each 115
3.40.A Construction of Cement concrete
chamber 125mm dia on depressed
floor upto 45cm height from floor
with :
3.40.A.1 C.P. Brass Grating Each 173.00 120.00 ###### Each 173
SPUN-CENTRIFUGALLY CAST
IRON SOIL WATER & RAIN
WATER PIPES:
3.42.1 75mm dia w/o door Each 656.00 284.00 795.00 415.00 1005.00 398.00 726.00
3.42.1 100mm dia w/o door Each 744.00 428.00 994.00 585.00 1318.00 665.00 897.00
3.42.2 150mm dia w/o door Each - 759.00 2683.00 1333.00 1968.00 1143.00 1789.00
3.43.1 Size 100x100mm Each 895.00 per mtr. 450.00 99% 895.0 per mtr.
3.43.2 Size 100x75mm Each 844.00 per mtr. 425.00 99% 844.0 per mtr.
S-47
Chapter
Code No
Description Unit Rate
75mm 110mm
dia dia
75mm 110mm
dia dia
4.1.1 100 mm dia nominal bore. Mtr. 307.00 210.00 ###### Mtr.
4.1.2 125 mm dia nominal bore. Mtr. 351.00 240.00 ###### Mtr.
4.1.3 150 mm dia nominal bore. Mtr. 381.00 260.00 ###### Mtr.
4.2.1 100 mm dia Nominal bore. Mtr. 417.00 285.00 ###### Mtr.
4.2.2 125 mm dia Nominal bore. Mtr. 483.00 330.00 ###### Mtr.
4.2.3 150 mm dia Nominal bore. Mtr. 732.00 500.00 ###### Mtr.
4.2.4 200 mm dia Nominal bore. Mtr. 1098.00 750.00 ###### Mtr.
S-50
Chapter
Description Unit Rate
Code No
4.5.1 100 mm nominal bore Mtr. 100.00 114.30 5.00 13.48 597.00
4.5.2 125 mm nominal bore Mtr. 125.00 141.30 5.00 16.80 743.00
4.5.3 150 mm nominal bore Mtr. 150.00 168.30 5.00 20.13 889.00
4.5.4 200 mm nominal bore Mtr. 200.00 219.00 5.40 28.46 1256.00
4.5.5 250 mm nominal bore Mtr. 250.00 273.00 7.10 46.57 2053.00
S-51
Chapter
Description Unit Rate
Code No
INDEX
Note: The rates are inclusive of all taxes etc. and for
estimation purpose only.
1.3 Supply & Stacking good earth at site complete Cum 125.00
including loading unloading and transportation etc.
H-2
Chapter Description Unit Rate (Rs.)
Code No.
1.4 Supply of Insecticides & Pesticides at store in dust /
liquid form complete.
1.16.13 Different Fycus Plants Topairy 3'-4' height Each 900.00 to 1000.00
H-6
CHAPTER H-2
MAINTENANCE OF GARDENS
Note: The rates are inclusive of all taxes etc. and for estimation
Purpose only.
(b) Filling and planting of sapplings and watering of Per 100 Pots
plots. Per day 80.00
(c) Weding Hoeing Stacking & Coloring of pots. The P.100 Pots P.
Department will supply material. Day 75.00
2.2 Digging pits in ordinary soil & refilling the same with
the excavated earth mixed with manure in the ratio of
2: 1 by valume (2 parts of stacked valume of earth
after reduction by 20% 1 parts of stacked volume of
manure after reduction by 8%) flooding with water
and dressing including removal of surplus earth (Cost
of manure or extra good earth if needed to be paid
separately) pit dia
60cm x 60cm deep. Each 15.00
2.3 Planting of annual saplings watering in the bed. Sqm. 1.00
INDEX
M-31 Reference of CE Jaipur order No. 821 dated 8.8.1989 M-117 to M-119