Professional Documents
Culture Documents
Doc. Number:
■ Tentative Specification
□ Preliminary Specification
□ Approval Specification
Customer:
APPROVED BY SIGNATURE
Name / Title
Note :
Only for reference
Steve
PRODUCT SPECIFICATION
REVISION HISTORY
Version Date Page Description
1
PRODUCT SPECIFICATION
Contents
1 General Specifications…………………………………………………………………………….............................................1
2 Pin assignment……………………………………………………………………………………................................................2
3 Operation Specifications…….……………………………………………………………………………………………………..5
3.1 Absolute Maximum Rating………………………………………………………………………………………………….5
3.1.1 Typical Operation Conditions……………………………………………………………………………………..6
3.1.2 Current Consumption…………………………………………………………………………………………………7
3.1.3 Backlight Driving Conditions………………………………………………………………………………………7
3.2 Power Sequence…………………………………………………………………………………………………………………8
3.3 Timing Characteristics……………………………………………………………………………………………………….9
3.3.1 AC Electrical Characteristics…………..……………………………………………………………………………9
3.3.2 Data Input Format……………………………..………………………………………………………………………10
3.3.3 Timing…………………………………………………..…………………………………………………………………..10
3.3.4 Data input format………………………………………………………………………………………………………11
4 Optical Specifications……………………………………………………………………………………………………………….13
5 Reliability Test Items………………………………………………………………………………………………………………..17
6 General Precautions………………………………………………………………………………………………………………….19
6.1 Safety………………………………………………………………………………………………………………………………...19
6.2 Handling …………………………………………………………………………………………………………………………..19
6.3 Static Electricity………………………………………………………………………………………………………………….19
6.4 Storage……………………………………………………………………………………………………………………………...19
6.5 Cleaning…………………………………………………………………………………………………………………………….19
7 Mechanical Drawing…………………………………………………………………………………………………………………20
8 Package Drawing……………………………………………………………………………………………………………………...21
8.1 Package Material Table…………………………………………………………………………………………………..…21
8.2 Packaging Quantity…………………………………………………………………………………………………………...21
8.3 Packaging Drawing……………………………………………………………………………………………………………22
8.4 Shipping Drawing...……………………………………………………………………………………………………………23
PRODUCT SPECIFICATION
1. General Specifications
11 Interface Digital
1
PRODUCT SPECIFICATION
2. Pin Assignment
FPC Connector is used for the module electronics interface. The recommended model is FH12A-50S-0.5SH
manufactured by Hirose.
12 B7 I Blue data(MSB)
13 B6 I Blue data
14 B5 I Blue data
15 B4 I Blue data
16 B3 I Blue data
17 B2 I Blue data
20 G7 I Green data(MSB)
21 G6 I Green data
22 G5 I Green data
23 G4 I Green data
24 G3 I Green data
25 G2 I Green data
2
PRODUCT SPECIFICATION
28 R7 I Red data(MSB)
29 R6 I Red data
30 R5 I Red data
31 R4 I Red data
32 R3 I Red data
33 R2 I Red data
45 NC - No connection
49 NC - No connection
50 NC - No connection
Note 2: When input 18 bits RGB data, the two low bits of R,G and B data must be grounded.
3
PRODUCT SPECIFICATION
Up
Left Right
Down
Note 6: Global reset pin. Active low to enter reset state. Suggest to connect with an RC reset circuit for
4
PRODUCT SPECIFICATION
3. Operation Specifications
VGH-VGL - 40.0 V
Each LED
LED Reverse Voltage VR - 5 V
Note 2
Note 1: The absolute maximum rating values of this product are not allowed to be exceeded at any times.
Should a module be used with any of the absolute maximum ratings exceeded, the characteristics of the
module may not be recovered, or in an extreme case, the module may be permanently destroyed.
5
PRODUCT SPECIFICATION
3.1.1. Typical Operation Conditions
Values
Symbol Unit Remark
Item
Min. Typ. Max.
Note 1: Be sure to apply DVDD and VGL to the LCD first, and then apply VGH.
Note 2: DVDD setting should match the signals output voltage (refer to Note 3) of customer’s system board.
Note 4: Typical VCOM is only a reference value. It must be optimized according to each LCM. Please use VR
0.1uF 28.7Kohm
1
VR1
10Kohm 2 VCOM
10uF 0.1uF
3
13Kohm
6
PRODUCT SPECIFICATION
3.1.2. Current Consumption
Values
Symbol Unit Remark
Item
Min. Typ. Max.
Values
Item Symbol Unit Remark
Min. Typ. Max.
℃ and IL =180mA
Note 1: The LED Supply Voltage is defined by the number of LED at Ta=25℃
Note 2: The “LED life time” is defined as the module brightness decrease to 50% original brightness at
℃ and IL = 180mA. The LED lifetime could be decreased if operating IL is larger than 180mA.
Ta=25℃
7
PRODUCT SPECIFICATION
a. Power on:
DVDD→RSTB→
→VGL→
→AVDD→
→VGH→
→Data→
→B/L
b. Power off:
B/L→
→Data→
→VGH→
→AVDD→
→VGL→
→RSTB→
→DVDD
Note: Data include R0~R7, B0~B7, GO~G7, U/D, L/R, DCLK, HS,VS,DE.
8
PRODUCT SPECIFICATION
Values
Item Symbol Unit Remark
Min. Typ. Max.
From 0 to 90%
DVDD Power On Slew rate TPOR - - 20 ms
DVDD
9
PRODUCT SPECIFICATION
3.3.2. Input Clock and Data Timing Diagram
3.3.3. Timing
Values
Item Symbol Unit Remark
Min. Typ. Max.
10
PRODUCT SPECIFICATION
Values
Item Symbol Unit Remark
Min. Typ. Max.
VS Blanking tvb 23 23 23 TH
11
PRODUCT SPECIFICATION
12
PRODUCT SPECIFICATION
4. Optical Specifications
Values
Item Symbol Condition Unit Remark
Min. Typ. Max.
θL Φ=180°(9 o’clock) 60 70 -
θR Φ=0°(3 o’clock) 60 70 -
Viewing angle
degree Note 1
(CR≥ 10)
θT Φ=90°(12 o’clock) 40 50 -
θB Φ=270°(6 o’clock) 60 70 -
Luminance
YU 70 75 - % Note 7
uniformity
Test Conditions:
℃.
1. DVDD=3.3V, IL=156mA (Backlight current), the ambient temperature is 25℃
13
PRODUCT SPECIFICATION
Note 1: Definition of viewing angle range
Normal line
θ=Φ=0°
Φ=90°
12 o’clock direction
θL
θT θR
θB
Φ=180°
Φ=0°
Active Area
LCM
Φ=270°
6 o’clock direction
Fig. 4-1 Definition of viewing angle
Φ=90°
12 o’clock direction
500mm
Φ=180° Φ=0°
Active Area
LCM
Φ=270°
6 o’clock direction
14
PRODUCT SPECIFICATION
Note 3: Definition of Response time
The response time is defined as the LCD optical switching time interval
between “White” state and “Black” state. Rise time (TON) is the time between
photo detector output intensity changed from 90% to 10%. And fall time
(TOFF) is the time between photo detector output intensity changed from
10% to 90%.
100%
(Relative value)
90%
10%
0%
TON TOFF
Note 6: All input terminals LCD panel must be ground while measuring the center
area of the panel. The LED driving condition is IL=192mA
15
PRODUCT SPECIFICATION
W/6
L/6 L/3 L/3
W/3
W
W/3
16
PRODUCT SPECIFICATION
(1)(2)(4)
Low Temperature Operation Test -30ºC, 240 hours
℃ 30min)→
(-30℃ →(85℃
℃ 30min)]/cycle,
,(Ramp rate≧
≧20℃
℃
Thermal Shock
/min) , 100cycles
100G for half sine 2 ms, 6 sides, for directions of ±X, ±Y,
Mechanical Shock (1)(3)
±Z
高度:
高度 72cm(weight≦ ≦10kg), 60cm(weight>>10kg);
Packaging Drop Test
1times for 6-faces, 3-edges and 1-corner
Note (1) criteria : Normal display image with no obvious non-uniformity and no line defect.
Note (2) Evaluation should be tested after storage at room temperature for more than two hour
Note (3) At testing Vibration and Shock, the fixture in holding the module has to be hard and rigid
enough so that the module would not be twisted or bent by the fixture.
Note (4) A certain level of Mura (non-uniformity) of dark / black image will happen several days after
high temperature testing (H.T.T.). There is a slowly part recovery over a long time (several months).
Such a long exposure time like in H.T.T. will normally not happen in a real application. Therefore the
test H.T.T. was introduced to simulate cycles with normal conditions in-between but with the same
total exposure time what show a significant reduced Mura.
17
PRODUCT SPECIFICATION
The root cause is related to tension generated due to different amount of shrinking in the stack of
layers in the polariser sheet. The effect is more significant on larger displays like this size. An
investigation into alternative polariser material showed that there is no better alternative currently
available.
18
PRODUCT SPECIFICATION
6. General Precautions
6.1. Safety
Liquid crystal is poisonous. Do not put it in your mouth. If liquid crystal touches your skin or
6.2. Handling
1. The LCD panel is plate glass. Do not subject the panel to mechanical shock or to excessive
force on its surface.
2. The polarizer attached to the display is easily damaged. Please handle it carefully to avoid
scratch or other damages.
3. To avoid contamination on the display surface, do not touch the module surface with bare
hands.
4. Keep a space so that the LCD panels do not touch other components.
5. Put cover board such as acrylic board on the surface of LCD panel to protect panel from
damages.
6. Transparent electrodes may be disconnected if you use the LCD panel under environmental
conditions where the condensation of dew occurs.
2. Do not apply voltage which exceeds the absolute maximum rating value.
6.4. Storage
℃ and 65%RH or less.
1. Store the module in a dark room where must keep at 25±10℃
2. Do not store the module in surroundings containing organic solvent or corrosive gas.
6.5. Cleaning
1. Do not wipe the polarizer with dry cloth. It might cause scratch.
2. Only use a soft sloth with IPA to wipe the polarizer, other chemicals might permanent
damage to the polarizer.
19
PRODUCT SPECIFICATION
7. Mechanical Drawing
20
PRODUCT SPECIFICATION
8. Package Drawing
Corrugated
4 Carton 398 x 352 x 280 0.9 1
paper
Total LCM quantity in Carton: no. of Partition 1 Rows x quantity per Row 30 = 30
21
PRODUCT SPECIFICATION
22
PRODUCT SPECIFICATION
23