Professional Documents
Culture Documents
23 -1 -5
RECEIVED BY ARAMCO ON MARCH 31.1982
.
1.
RECORD~RS
23. Clear Text Recorders are to be powered from a 24v 0 C supply
and print at a minimum speed of one line ~er second each line having
18 columns.
24. The printout to show the following data:
a. Month/Pay
b. Hour/Minute
c. Door Number
I
d. Identity Number'
25. Each Printer Interface is to be fitted with a built-in
electronic clock which automatically supplies the Recorder with.the
i
following info~at.~on:
a. Date ;
I
b. Hour
c. Minute
26. The Recorder to be fitted with a push-button Which, when activ-
ated will print-ou~ the date, hour and minute on one line. This
button will be used for checking the Recorder is o~rational and also
that the clock is giving the correct information.
27. The Recorder is to be fj.tted with override circuits. The
circuits are to be capable of by-~ssing the recording function if the
"Recorder jams or there is a mains power failure. These conditions to
be indicated at a remote point by a si9nalling circuit in the Recorder.
28. The Recorder must place on recorq all R~CT attempts t1 gain
entry. The inform~tion is to ~e printed in RED so that it is
immediately apparent to the monitoring authority.
29. Where very high security is required the Memory Unit is to be
installed as standard equipment. The following applications are to
be followed when a Memory Unit is installed.
1 a. Both Entry and EX).t are to be controlled by Cardreader
'r b. A card cannot be used to g~in access a second time unless
it has first been used to exit the area
c. The Memory Unit is capable of handling at least 4000
personal ,codes and 15 entry/exit points.
30. Memory Units are to be f~_tted with stand-by batteries. .However
it is essential to re~lise that a loss of power, caused by either a
short circuit or a service engineers action, will erase the information
stored in the Unit. If such an incid~nt occurs it will be nec~ssary
This page has been retyped by Aramco; a copy of the original page
Cardreader.
USAGE
39. The ACE system outlined above is to be used only in buildings
already sited within a security compound or other security area. It
is not to be.].;ISed for control of access at the main gate to the
.,
security area, compound or installation.
23 -5 -5
This page has been retyped by Aramco; a copy of the original page
may be obtained by contacting the Manager of the Technical Services
Department. 786-A 7
a.
~ b.