Professional Documents
Culture Documents
amigurumifree.picpin.pro/amigurumi-velvet-brown-bunny-free-crochet-pattern
Welcome to our website where you can find the most beautiful and highest quality
samples of Amigurumi patterns. All the amigurumi patterns you can’t find are available
on our website. Every day we continue to share new amigurumi patterns for you. Stay
tuned to reach these amigurumi patterns before anyone else
Materials:
– brown – 1 skein;
YarnArt “Cotton Soft” yarn (100g / 600m) (44% polyacryl, 55% cotton):
Any thin cotton yarn for decorating shorts. I have Altın Başak “MAXI” (100g / 565m) (100%
cotton) – beige
Disks for mounting legs and head with a diameter of 25 mm (6 pcs.), 3 T-shaped cotter
pins
Disks for fastening hands with a diameter of 18 mm (4 pcs.), 2 T-shaped cotter pins
Spandex
Glue
Filler
Scissors
1/17
Sewing needle
Abbreviations
sc – single crochet
DC – double crochet
inc – increase
dec – decrease
2/17
From Katya: one skein was enough, it is desirable to have a supply, height 16.3 cm, disks
in legs and head 25 mm, in handles 20 mm, hook Clover 1.75, and shorts and the bunny
itself.
KHT: height is 19 cm, one skein is gone (10 g of skein is left), discs in handles are 22 mm,
in legs and head are 30 mm, hook is Clover 2 mm, jeans shorts.
Alize “Softy” consumption of 1.5 hank approximately. Hook Gamma 1.5. Mounts – joints –
in the handles – 28 mm, in the legs and head 35 mm. Shorts from Trinity yarn (acrylic
70%, wool 30%). Bunny sprout 28 cm.
STAGE 1.
HANDS (2 parts)
The thread is
brown.
Right hand.
The beginning
marker of the
row runs in the
center of the
outer part of the
arm.
1 pp.: 6 sc into
magic ring (6)
3/17
of the row and
the first loop of
the next row) (11)
5 pp.: 13 sc (13)
6 pp .: 6 sc, inc, 6
sc (14)
9 pp.:
15 sc
(15)
10
pp.: 7
sc,
inc, 7
sc
(16)
11
pp.:
15 sc,
dec
(we
4/17
decrease from the last loop of the row and the first loop of the next row) (15)
13 pp.: 17 sc (17)
24 p.: (We knit the hole for the cotter pin): 16 sc, 1 CH, skip 1 loop, 5 sc (22)
If you have thick yarn, you don’t need to knit this hole.
5/17
26
p.:
(1
sc,
dec) * 6 (12)
6/17
Fasten the thread, cut. Pull off the remaining hole. Hide the end of the thread inside the
part.
We knit the left hand similarly with the exception of the 24th row:
24 p.: (We knit the hole for the cotter pin): 6 sc, 1 CH, skip 1 loop, 15 sc (22)
7/17
LEGS (2 parts)
Right leg.
The beginning marker of the row runs through the center of the back of the leg.
1p.: From the second loop from the hook: 5 sc, 3 sc to the last loop, on the back of the
chain: 4 sc, inc (14)
3 pp: 1 sc, inc, 4 sc, (1 sc, inc) * 3, 4 sc, (1 sc, inc) * 2 (26)
5 pp.: 26 sc (26)
24 p.: (We knit a hole for the cotter pin): 6 sc, 1 CH, skip 1 loop, 23 sc (30)
25 pp.: 30 sc (30)
8/17
26 p.: (3 sc, dec) * 6 (24)
Fasten the thread, cut. Pull off the remaining hole. Hide the end of the thread inside the
part.
We knit the left leg similarly with the exception of the 24th row:
24 RUR (we knit a hole under the joint): 21 sc, 1 CH, 1 loop without skipping, 8 sc (30)
2 STAGE.
BODY
The beginning marker of the row runs through the center of the back.
11 p.: (We knit holes for cotter pins): 9 sc, inc, 4 sc, 1 CH, 1 loop without skipping, 4 sc, inc,
(9 sc, inc) * 2, 6 sc, 1 CH, 1 loop to skip , 2 sc, inc, 9 sc, inc (66)
Move the marker of the beginning of the row to 1 loop to the left.
9/17
19 pp.: 56 sc, dec, 8 sc (65)
23 pp.: 58 sc (58)
25 pp.: 55 sc
Move the marker of the beginning of the row to 1 loop to the left.
27 pp.: 52 sc (52)
28 p.: (We knit holes for cotter pins): 5 sc, dec, 5 sc, 1CH, 1 loop to skip, 5 sc, dec, 11 sc,
dec, 5 sc, 1CH, 1 loop to skip, 5 sc, dec, 6 sc (48)
Insert the legs into the holes tied under the cotter pins. Screw in cotter pins.
32 pp.: 48 sc (48)
34 p.: 42 sc (42)
36 p.: 36 sc (36)
Choose the right disk diameter for the neck, it should be equal to the diameter of the
hole at this stage of work.
Insert your hands into the holes tied under the cotter pins. Screw in cotter pins.
3 STAGE.
HEAD
A marker at the beginning of the row runs through the center of the chin.
10 pp .: 34 sc, cut off the cream-colored thread, attach the brown thread: 7 sc (41)
We mark the 7th loop (center of the chin), transfer the marker to the beginning of the
row. If you don’t have one, knit the required number of loops to be in the center of the
chin.
16 pp.: 67 sc (67)
18 pp.: 73 sc (73)
20 pp.: 79 sc (79)
21р .: knit the hole for the cotter pin: 78 sc, 1 CH, 1 loop without skipping without knitting
(79)
11/17
22-28rr. (7 rows): 79 sc (79)
Insert the cotter pin from the body into the tied hole in the head, secure the cotter pin.
Stuff your head with filler.
Fasten the thread, cut. Pull off the remaining hole, hide the end of the thread inside the
part.
4 STAGE.
NOSE
The marker for the beginning of a row in this part can be omitted.
5 pp.: 15 sc (15)
6 pp .: fold the part in half, knit together both sides of the part: 7 sc.
TAIL
The marker for the beginning of a row in this part can be omitted.
6 pp .: 4 dec, 10 sc (14)
Ears
1p .: starting from the 2nd loop from the hook: 10 sc, 8 HDC, 6 DC, the last loop: 6 DC, on
the back of the chain: 6 DC, 8 HDC, 10 sc
2 pp.: 1 CH, turn, 11 sc, 8 HDC, 5 DC, 6 inc DC, 5 DC, 8 HDC, 11 sc
In a brown part, do not cut the thread, fold both parts together with the wrong side
inward, continue to knit the ear, knitting loops of both parts again:
3 pp: 1 CH, turn, 12 sc, 8 HDC, 4 DC, (1 DC, 1 inc DC) * 6, 4 DC, 8 HDC, 12 sc
Eyebrows
13/17
Leaving the long end of the thread, dial a chain of 3 CH. In the 1st loop of the chain knit 3
DC with a common vertex, 1 sl-st.
DECOR
For the eyes, this is the point between the first and second rows after a color change
over the last central increases.
For the mouth, this is the point on the marker at the border of the color change.
Insert the needle with the thread into the point of the mouth scrunch, point out the point
of the scrunch for the right eye, thread the needle through the eye of the button-eye with
felt, insert the needle into the same point of the scrunch of the right eye and bring to the
point of the scrunch for the mouth. Tighten the thread so that the eye drowns. Tighten
the left side in the same way.
Tighten the muzzle without cutting the thread. To do this, introduce the thread with the
needle into the center of the muzzle by counting 5 rows from the top of the muzzle (the
thread runs along the top of the muzzle). Tighten the thread. Having retreated 1 row
down, remove the needle and again insert the needle into the point of tightening for the
mouth (the thread runs along the top of the muzzle). Withdraw the needle at the upper
point of the muzzle tightening (the thread passes inside the muzzle). Tighten the thread.
Fasten the thread, cut. Hide the end of the thread inside the part.
Identify the location of the eyebrows. Insert the remaining end of the thread from one
side of the eyebrow into the needle, insert it into the designated location of the inner
corner of the eyebrow, withdraw from the back of the head, fix the thread by introducing
and removing the needle and thread in different places of the head. Lubricate the
eyebrow from the inside with glue, thread the remaining end of the thread on the other
side of the eyebrow into the needle, insert it into the designated location of the outer
corner of the eyebrow, withdraw from the back of the head, fix the thread by introducing
and removing the needle with the thread in different places of the head.
Toned the inner part of the ears, muzzle, the area around the eyebrows and eyes with
dry pastel or other means of tinting available to you.
14/17
Sew tail
5 STAGE.
SHORTS
Leaving the long end of the thread (sufficient to tie the edge of the elastic 1 near the
connecting posts) with blue yarn, dial a chain of 80 CH. Close the chain in a circle 1 sl-st.
1-2rr. (2 rows): at the same time we knit spandex: 1 CH, 80 sc, 1 sl-st in the first loop of
the next row.
3-7rr. (5 rows): 1 CH, 80 sc, 1 sl-st in the first loop of the next row.
At this stage, knit aside, unfold the shorts with an elastic band to the top, tie the top of
the elastic band 1 with a row of connecting posts left with the end of the thread.
Fasten the thread, cut off the remaining end of the thread.
8 pp.: 2 sl-st, then we knit from the 4th loop of the row: 1 CH, 74 sc. There are 3 loops left
to the end of the row, we leave them unbound. We knit the next rows in rotary rows, in
the wrong rows we knit single crochet columns face-wise on the wrong side with yarn
correction!
12 p.: 1 CH, turn, 74 sc, 6 CH, 1 sl-st in the first loop of the next row.
13 pp.: 1 CH, 74 sc, 6 sc in the loop of the chain, 1 sl-st in the first loop of the next row.
14 pp.: 1 CH, 80 sc, 1 sl-st in the first loop of the next row
15 pp: 1 CH, 80 sc, 2 sl-st in the first loops of the next row
Count 30 loops from the gusset to the left, attach the blue thread to the 31st loop on the
front side, knit the second part of the gusset:
1 pp.: 1 CH, 10 sc
For the right leg, attach the blue thread to the right side of the gusset in the center (at the
seam connecting both sides of the gusset):
1p .: 7 sc along the crotch, 1 sc between the crotch and the leg, 30 sc across the pant, 1 sc
between the crotch and the crotch, 6 sc across the crotch, 1 sl-st in the first loop of the
next row (45)
2 pp: 1 CH, 6 sc, dec, 29 sc, dec, 6 sc, 1 sl-st in the first loop of the next row (43)
3р .: 1 CH, 36 sc, dec, 5 sc, 1 sl-st in the first loop of the next row (42)
4 pp .: 1 CH, 42 sc, 1 sl-st in the first loop of the next row (42)
5 pp.: 42 sl-st
For the left leg, attach the blue thread to the left side of the gusset in the center (at the
seam connecting both sides of the gusset):
1p .: 7 sc along the crotch, 1 sc between the crotch and the leg, 30 sc across the pant, 1 sc
between the crotch and the crotch, 6 sc across the crotch, 1 sl-st in the first loop of the
next row (45)
2p .: 1 CH, 7 sc, dec, 29 sc, dec, 5 sc, 1 sl-st in the first loop of the next row (43)
3 pp.: 1 CH, 6 sc, dec, 35 sc, 1 sl-st in the first loop of the next row (42)
4 pp .: 1 CH, 42 sc, 1 sl-st in the first loop of the next row (42)
5 pp.: 42 sl-st
Tie the tail hole as follows: (1 CH, 1 sl-st in the next loop) * to the end of the row.
Attach a blue thread to the 6th loop of the shorts belt from the back of the beginning of
the row. We knit a chain of 45 CH + 9 CH (for a buttonhole)
Starting from the 10th loop from the hook: 45 sc, 1 sl-st into the 7th loop of the short
belt. Next, knit 2 sl-st along the belt from left to right, knit 1 CH and then tie the strap
around the perimeter as follows: 1 CH, 1 sl-st in the next loop.
Beige thread along the edges of the belt, trouser-legs, the center of the hog sides and the
width, knit the stitches with connecting posts (the chain will be inside the product, and
the stitch will pass along the front side). Or these lines can be embroidered. Sew a
16/17
button
17/17