Professional Documents
Culture Documents
Recommended use
This primer is used on bridge structures, interior and exteriors of petroleum storage tanks, marine installations and off-shore
platforms. The most suitable primer where high heat resistance is the main requirement especially in corrosive environment. It is an
Ideal primer for Thermal and Hydro power plants.
Minimum Maximum
Physical Properties
Page 1 of 3
Issue no:01
Issue date: June,2018
Technical Data Sheet
Surface Preparation
The substrate must be sound, clean, dry and free from dust, oil, grease, laitance etc. All traces of form release agents/curing agents
must be removed. A light sanding with suitable abrasive material is recommended before application. Any resulting dust/loose
particles must be removed. Suitable substrate is Blast cleaned steel to Sa 2.5 Minimum.
Application Methods
KAN-THYL Ethyl Zinc Silicate primer can be applied using roller, brush, conventional or airless spray. Apply an even coat to the
recommended film build using a brush or roller. While using a spray apply one wet coat overlapping the last one by 50%. Freshly mixed
material must not be added to material which has been in use for some time. Stir liquid thoroughly and then mix to uniform consistence
40 parts liquid with 60 part powder by weight. Allow to stand 10 minutes and stir continuously during use. Mix only sufficient product
which may be used within pot life period.
Application data
Stir liquid thoroughly and then mix to uniform consistence 40 parts liquid with 60 part powder
Mixing
by weight.
Pot life 4 Hours @25oC
Drying Time
Relative Humidity: 50%
Dry to Touch(minutes) 70 30 15
Dry to Handle(hours) 10 6 3
Dry to Recoat 10 6 3
Page 2 of 3
Issue no:01
Issue date: June,2018
Technical Data Sheet
Storage
The product must be stored in accordance with national regulations. Keep the containers in a dry, cool, well ventilated space and away
from sources of heat and ignition. Containers must be kept tightly closed. 6 months shelf life.
Handling
Handle with care. Stir well before use.
Packing Size
Available in 4 Liter packs.
Certificates
Certificates may be available on request.
Tests
Disclaimer
The information in this document is given to the best of Kansai's knowledge, based on laboratory testing and practical experience. Kansai cannot guarantee anything but the quality of the
product itself. However, as we have no control over the handling, storage, treatment of the product, the standard of surface preparation of the substrate, or other factors affecting the use
of this product, we are not responsible for its performance nor would we accept any liability whatsoever or howsoever arising from the use of this product unless specifically agreed to in
writing by us. Kansai reserves the right to change the given data without further notice.
Page 3 of 3
Issue no:01
Issue date: June,2018