Professional Documents
Culture Documents
Product Use:
1
ETALIA PRODUCT FORM
Product Use:
Made with Mild steel or Stainless steel (SS 304/SS 316).
Finished Electro galvanized 15+microns (Galvanized Zinc Plating) [ Hot dip galvanized if
required ]
Maximum Temperature should be 650°F (343°C)
Electro galvanized as per ASTM B 633 Standards
Complies with Federal Specification WW-H-171E (Type 7) and A-A-1192A (Type 10) and
Manufacturers Standardization Society SP-69 (Type 7).
It has a vertical adjustment of 5/8" inches to 2" inches by means of a suspended steel rod
threaded and two nuts
This hanger is formed in one piece giving a double thickness of stock at the point which
carries the load.
The lower nut adjust the pipe line to the proper pitch and the top nut when locked onto
position prevents loosening due to vibration
2
ETALIA PRODUCT FORM
Product Use:
Made with Mild steel(Cold Rolled & Hot Rolled steel) or Stainless steel (SS 304/SS 316)
Finished Electro galvanized 12+micros (Galvanized Zinc Plating) [ Hot dip galvanized if
required ]
Electro galvanized as per ASTM B 633 Standards
It has a vertical adjustment of 5/8" inches to 12" inches by means of a suspended steel rod
threaded and two nuts
Hangers and supports used in fire protection piping systems shall be listed and labeled by
Underwriters Laboratories Inc (USA).
Steel pipe hangers and supports shall have the manufacturer’s name, part number, and
applicable size stamped in the part itself for identification.
Permits installation before or after pipe is in place.
Provides economical installation.
Permits use of universally adaptable parts.
3
ETALIA PRODUCT FORM
Product Use:
Made with Mild steel(Cold Rolled & Hot Rolled steel) or Stainless steel (SS 304/SS 316)
Pipe hanger with EPDM Lining.( EPDM rubber for sound reduction)
Finished Electro galvanized 12+micros (Galvanized Zinc Plating) [ Hot dip galvanized if
required ]
Electro galvanized as per ASTM B 633 Standards
It has a vertical adjustment of 5/8" inches to 12" inches by means of a suspended steel rod
threaded and two nuts
Hangers and supports used in fire protection piping systems shall be listed and labeled by
Underwriters Laboratories Inc (USA).
For use in supporting horizontal piping away from the wall or floor.
Permits installation before or after pipe is in place.
Provides economical installation.
Permits use of universally adaptable parts.
4
ETALIA PRODUCT FORM
Product Use:
Made with Mild steel(Cold Rolled & Hot Rolled steel) or Stainless steel (SS 304/SS 316)
Pipe hanger with EPDM Lining.( EPDM rubber for sound reduction)
Horizontal, vertical and suspended installations. Steel, copper and PVC pipes
Welded Nut M8/M10 with option of M10/M12
Connection thread with M8/M10 dual-tapped boss
Safe and Break Loads as per Chart
Side Screw: 6 x 20 – Phillip head with vicer
M6 Side Nuts can be provided on request
High rigidity due to reinforcing rib
The two locking screws allow adjustment to accommodate a greater variation in pipe
diameter
Fastener screws with captive washer
With highly elastic vibration control lining
Vibration control tested
Electro galvanized as per ASTM B 633 Standards
5
ETALIA PRODUCT FORM
Product Use:
Made with Mild steel(Cold Rolled & Hot Rolled steel) or Stainless steel (SS 304/SS 316)
Horizontal, vertical and suspended installations. Steel, copper and PVC pipes
Welded Nut M8/M10 with option of M10/M12
High-strength round welded connecting nut
Safe and Break Loads as per Chart
Side Screw: 6 x 20 – Phillip head with vicer
M6 Side Nuts can be provided on request
The two locking screws allow adjustment to accommodate a greater variation in pipe
diameter
Fastener screws with captive washer
Can be used as a pipe anchor point
Suitable for installations without vibration control requirements
Electro galvanized as per ASTM B 633 Standards
6
ETALIA PRODUCT FORM
Product Use:
Made with Mild steel(Cold Rolled & Hot Rolled steel) or Stainless steel (SS 304/SS 316)
Designed for chilled water pipe work and fire fighting systems.
Design permits vertical adjustment of pipe after installation.
Hanger load nut above Clevis must be tightened securely to ensure proper hanger
performance.
With highly elastic vibration control lining
Vibration and Sound control tested
Electro galvanized as per ASTM B 633 Standards
7
ETALIA PRODUCT FORM
Product Use:
Made with Mild steel(Cold Rolled & Hot Rolled steel) or Stainless steel (SS 304/SS 316)
Designed for chilled water pipe work and fire fighting systems.
Design permits vertical adjustment of pipe after installation.
Hanger load nut above Clevis must be tightened securely to ensure proper hanger
performance.
Designed to meet MSS-SP58, type -1
Electro galvanized as per ASTM B 633 Standards
8
ETALIA PRODUCT FORM
Product Use:
Made with Mild steel(Cold Rolled & Hot Rolled steel) or Stainless steel (SS 304/SS 316)
For use in Fire Fighting and Sprinkler Applications.
One-piece design allows quick and easy installation of sprinkler pipes
Ideal for suspension using Threaded Pins and Threaded Rods
Simple height adjustment using the knurled nut
Knurled nut secured by locking hook against falling out
Mounting without any tools
Locking device allows easy pre mounting
Adjustable in height.
Designed to meet MSS-SP58, type -10
Electro galvanized as per ASTM B 633 Standards
9
ETALIA PRODUCT FORM
Product Use:
Made with Mild steel(Cold Rolled & Hot Rolled steel) or Stainless steel (SS 304/SS 316)
Used to mount electrical and insulated pipes.
Used for corner locking
Used for better gripping of Electrical Conduits
Electro galvanized as per ASTM B 633 Standards
10
ETALIA PRODUCT FORM
Product Use:
Made with Mild steel(Cold Rolled & Hot Rolled steel) or Stainless steel (SS 304/SS 316)
Galvanized u strap clamp with EPDM Lining.( EPDM rubber for sound reduction)
Used to mount plain or insulated pipes.
Can be used with Rubber Support Inserts.
With highly elastic vibration control lining
Vibration and Sound control tested
Electro galvanized as per ASTM B 633 Standards
11
ETALIA PRODUCT FORM
Product Use:
Made with Mild steel(Cold Rolled & Hot Rolled steel) or Stainless steel (SS 304/SS 316)
Used to mount plain or insulated pipes.
Can be used with Rubber Support Inserts.
Electro galvanized as per ASTM B 633 Standards
12
ETALIA PRODUCT FORM
Product Use:
Made with Mild steel(Cold Rolled & Hot Rolled steel) or Stainless steel (SS 304/SS 316)
Used to mount plain or insulated pipes.
Vibration and Sound control tested
Electro galvanized as per ASTM B 633 Standards
13
ETALIA PRODUCT FORM
Product Use:
Made with Mild steel(Cold Rolled & Hot Rolled steel) or Stainless steel (SS 304/SS 316)
Used to mount plain or insulated pipes.
Vibration and Sound control tested
Electro galvanized as per ASTM B 633 Standards
14
ETALIA PRODUCT FORM
Product Use:
Made with Mild steel(Cold Rolled & Hot Rolled steel) or Stainless steel (SS 304/SS 316)
Designed for fixing pipes away from Wall or Floor
Side Screw: 6 x 20 – Phillip head with vicer & M6 nut
M6 given on request
With highly elastic vibration control lining
Vibration and Sound control tested
Electro galvanized as per ASTM B 633 Standards
15
ETALIA PRODUCT FORM
Product Use:
Made with Mild steel(Cold Rolled & Hot Rolled steel) or Stainless steel (SS 304/SS 316)
Designed for fixing pipes away from Wall or Floor
Side Screw: 6 x 20 – Phillip head with vicer & M6 nut
M6 given on request
Electro galvanized as per ASTM B 633 Standards
16
ETALIA PRODUCT FORM
Product Use:
Made with Mild steel(Cold Rolled & Hot Rolled steel) or Stainless steel (SS 304/SS 316)
Designed for fixing pipes.
Electro galvanized as per ASTM B 633 Standards
17
ETALIA PRODUCT FORM
Product Use:
Made with Mild steel(Cold Rolled & Hot Rolled steel) or Stainless steel (SS 304/SS 316)
Vertical installations. Steel, copper and PVC pipes
Riveted Rod Shaft for better gripping and mounting
Side Screw: 6 x 20 – Phillip head with vicer
M6 Side Nuts can be provided on request
The two locking screws allow adjustment to accommodate a greater variation in pipe
diameter
Fastener screws with captive washer
Suitable for installations without vibration control requirements
Electro galvanized as per ASTM B 633 Standards
18
ETALIA PRODUCT FORM
Product Use:
Made with Mild steel(Cold Rolled & Hot Rolled steel) or Stainless steel (SS 304/SS 316)
Designed to act as a Rigid Support or Guide for Vertical Pipes
Suitable for use with all types of pipes.
Designed to meet MSS-SP58 - 2002 - Type 8
With highly elastic vibration control lining
Vibration and Sound control tested
Electro galvanized as per ASTM B 633 Standards
Product Use:
Made with Mild steel(Cold Rolled & Hot Rolled steel) or Stainless steel (SS 304/SS 316)
Designed to act as a Rigid Support or Guide for Vertical Pipes
Suitable for use with all types of pipes.
Designed to meet MSS-SP58 - 2002 - Type 8
Electro galvanized as per ASTM B 633 Standards
Product Use:
Made with Mild steel(Cold Rolled & Hot Rolled steel) or Stainless steel (SS 304/SS 316)
Electro galvanized as per ASTM B 633 Standards.
Hot dipped galvanized can be provided on request.
Supplied with two or four nuts.
Special U Bolts with longer tangents and threads can be furnished on request
21
ETALIA PRODUCT FORM
Product Use:
Made with Mild steel(Cold Rolled & Hot Rolled steel) or Stainless steel (SS 304/SS 316)
EPDM lining for suppression of sound and vibrations.
Electro galvanized as per ASTM B 633 Standards.
Hot dipped galvanized can be provided on request.
Supplied with two or four nuts.
Special U Bolts with longer tangents and threads can be furnished on request
22
ETALIA PRODUCT FORM
Product Use:
23
Product Name: RUBBER SUPPORT INSERTS
Product Use:
Product Use:
25
Product Name: THREADED ROD
Product Use:
Product Use:
27
Product Name: FLAT WASHERS
Product Use:
28
ETALIA PRODUCT FORM
Product Use:
29
ETALIA PRODUCT FORM
Product Use:
30
ETALIA PRODUCT FORM
Product Use:
31
ETALIA PRODUCT FORM
Product Use:
Spring Hangers consist of free standing, laterally stable steel springs in series with a
moulded elastomeric element assembled into a stamped and welded hanger bracket. The
hanger brackets and the springs are power coated. Spring vibration isolation hangers are
designed to provide high efficiency isolation from structure-borne vibration and noise.
SPH product Hangers are used to isolate suspended sources of both noise and vibration.
Suspended mechanical equipment such as air handling units, FCU's cabinet fans, piping and
duck work in close proximity to rotating mechanical equipment are typical applications of
product SPH Hangers.
32
ETALIA PRODUCT FORM
Product Use:
Laterally stable springs with Neoprene top and base Colour- coded springs according to
load ratings Non-skid bolt down base Plated levelling / lock bolt Islets low frequency
vibration Springs are designed for 50% overload capacity Powder coated springs
CSM Spring isolators are recommended for use in isolating sources of noise and vibration
located near critically quite areas. They are highly effective for control of both high and low
frequency vibration produced by reciprocating refrigeration compressors, pumps, packaged
air-handing and air - conditioning equipments, centrifugal and axial fans, inertia bases,
internal combustion engines, etc...
33
ETALIA PRODUCT FORM
Product Use:
34
ETALIA PRODUCT FORM
Product Use:
35