Professional Documents
Culture Documents
GS 02C01E01-00EN
FEATURES
● Maintenance-Free Operation.
● High Performance Force-Balance Operation.
● Time-Proven Pneumatic Differential Pressure
Transmitter Design.
STANDARD SPECIFICATIONS
TRANSMITTER TOPWORKS AND BODY
Working Pressure Limits: Wetted Parts Material:
Full vacuum and the flange rating per JIS B 2201 or Force Bar and Other Parts: JIS SUS 316 stainless
ANSI B16.5. steel.
Output Signal: Raised Face Adapter: JIS SUS 316 stainless steel.
20 to 100 kPa. Force Bar Seal: Cobalt-nickel alloy.
Accuracy: Force Bar Seal Gasket: Viton.
±0.5% of span (calibrated by suspending weight from Body and Body Flange Material:
force bar). JIS S25C carbon steel.
Repeatability: Not wetted by process.
0.1% of span. Body Flange:
Dead Band: Side of Vessel Mounting Type: Nominal size 100 mm
0.1% of span. (4 inches), JIS 10 or 20 K, ANSI Class 150 or 300
raised face (RF) modified lapped flange. In this type,
Supply Pressure: body flange is connected directly to the process side
140 kPa, 1.4 kgf/cm2 or bar, or 20 psi. flange.
Air Consumption: Mounting Type Other Than Above: Nominal size 50
0.85 m3/h at 0°C, 101.3 kPa {1.033 kgf/cm2} absolute mm (2 inches), JIS 40K RF modified lapped flange.
(0.5 scfm). Cover:
Ambient Operating Temperature Range: Cast aluminum, finished with gray polyurethan paint.
-40 to 120°C (-40 to 250°F). Degrees of Protection:
Maximum Process Temperature Range: IP53 (Equivalent to NEMA3)
200°C (400°F) at transmitter flange face. Approximate Weight:
Mounting: Y/17B6-4
Direct to process with connection flange. JIS 10K flange: 9.8 kg (21.6 lb)
Air Connections: JIS 20K fiange: 12 kg (26.5 lb)
Tapped for JIS R1/4 or 1/4 NPT, whichever specified. Y/17B6-200K: 8 kg (17.6 lb).
OPTIONS
Item Description Code
Air set Supply pressure: 0.2 to 1 MPa, 2 to 10 kgf/cm2 or bar, or 30 to 150 psi.
GAS-F
Output pressure: 140 kPa, 1.4 kgf/cm2 or bar, or 20 psi.
NAS-F
Maximum operating temperature: 80°C (180°F). Refer to Table 2.
Low span Span limits: 350 to 700 g, Range limits: 0 to 700 g.
LD
Accuracy ±0.5% of span
Cover color other than standard finish Specify in color block by color code. Refer to GS22D01F01-00E. SCF-
Coating other than standard finish Epoxy resin-baked coated. EPF
Ammonia service Force bar gasket and capsule gasket: Neoprene rubber AMM
Stainless tube Tube and connectors between air-set (fixed pressure regulator with filter) and
transmitter are made by stainless steel. However, connection of pressure gauge SST
remains as standard material (Bs-Ni3).
ANSI connection Air connections: Tapped for 1/4NPT. NPT
Tropicalization When there is a possibility to generate rusts using under the condition of high
temperature and high humidity area, silicone grease is coated on whole screws. PSG
Silicon grease which has stronger oil film feature.
M-calibration Output signal: 0.2 to 1.0 kgf/cm2 CAL-M
P-calibration Output signal: 3 to 15 psi CAL-E
bar-calibration Output signal: 0.2 to 1.0 bar CAL-B
Stainless Tag plate Stainless Tag plate fixed with screws. Up to 16 characters. TP-S
Force bar seal gasket*1 GF Teflon GFT
Oxygen service preparation Degrease cleansing treatment. OSW
*1: Not applicable for option code OSW.
ORDERING INSTRUCTIONS
Specify the following when ordering:
1. Model and codes.
2. Range
Specify range values by mass range.
Example: 1800 to 750 g
The mass range is engraved in the RANGE column of the Y/17B6 nameplate.
When range calibration is unnecessary, specify “Uncalibration”.
All Rights Reserved. Copyright © 1980, Yokogawa Electric Corporation GS 02C01E01-00EN Mar. 5, 2018-00
<<Contents>> <<Index>> 3
DIMENSIONS
Unit: mm
Side of Vessel Mounting Type
Y/17B6-410K
94
118
20
ø145
øD
øC
AIR SUPPLY
GAUGE (OPTION)
33
25 80 161 25.4
AIR SUPPLY CONNECTION
110
(WITHOUT AIR SUPPLY SET)
ALLOW CLEARANCE 150 mm
FOR COVER REMOVAL OUTPUT CONNECTION
Bolt Holes
Raised Face Modified Flange øC øD t
No. DIA.
100A JIS 10K 8 19 175 210 18
4-inch ANSI Class 150 8 19.1 190.5 228.6 23.8
100A JIS 20K 8 23 185 225 24
4-inch ANSI Class 300 8 22.4 200 254 31.8
94
118
AIR SUPPLY
GAUGE (OPTION)
All Rights Reserved. Copyright © 1980, Yokogawa Electric Corporation GS 02C01E01-00EN Sep. 1, 2017-00
Subject to change without notice.