Professional Documents
Culture Documents
Combined TC TP Ejof - Prospect - en (24-170kv)
Combined TC TP Ejof - Prospect - en (24-170kv)
instrument
transformers
Outdoor operation
Oil-paper insulated
EJOF (24 –170) kV
General description
Combined instrument transformers type de silicone composite insulator. Different
EJOF are used in high voltage networks creepage distances are available according
within the 24 –170 kV range. They trans- to the different pollution classes, as specified
form high voltage and high current into in the standards.
standardised values for meters, measu-
ring and protection devices. The hermetic sealed housing protects the oil-
paper insulation against atmospheric influ-
The inner construction of a combined instru- ences.
ment transformer is similar to the construction
of the current and voltage transformer. The The generously sized terminal box has a co-
current transformer is located in the head and ver which can be opened sidewards. This al-
the voltage transformer in the bottom housing lows easy connection of the secondary ca-
of the combined instrument transformer. The bles. The terminal box has a flange without Advantages of combined
fine graded bushings are inside the insulator. holes by default. Cable glands, circuit dia- instrument transformers
gram and individual safety instructions can
The high voltage insulation is based on oil-pa- be preinstalled on request.
per technology. High-grade, PCB-free mineral ■■ Reduced transport costs with one unit
oil is used. instead of two
The expansion bellows made from stainless ■■ Less space needed with just one footprint
steel is located above the head housing of the
combined instrument transformer. This unit ■■ Lower material costs due to a reduced
acts as volume compensation for the oil in case number of supports and fewer primary
of temperature variations. The oil level is indi- connections
cated by a mechanical system in the window of
the bellows cover. ■■ Lower installation effort as only one unit
has to be installed instead of two
All metal housings and flanges are made from
a corrosion resistant aluminium alloy. These
parts can be colour coated on request.
All combined instrument transformers have
either a high-quality porcelain or a high-gra-
Design
Expansion bellows
Bellows cover with oil expansion indicator
Lifting lugs
Primary connection
Bushings
Possible
options
1xIN
A 2xIN
B
4xIN
F D
E C
■■ A clear and easy primary changeover with ■■ The inner side of the instrument transfor- ■■ The generously sized terminal box with a
a ratio of 1:2 or 1:2:4 is available. mer is protected against moisture by cover that can be opened sidewards, is
means of special sealing rings. secured with captive screws. It can
■■ The primary changeover is adjusted with accommodate terminal blocks, fuses,
one metal plate at one side of the head ■■ All housings are designed with a drain-age surge arrestors, additional auxiliary
only. area to protect the sealing surfaces of the contacts, spark gaps and sealable covers.
housings against rain. This significantly
■■ No need to dismount or move the primary reduces crevice corrosion. ■■ By default, all terminal boxes have a flange
connections during adjustment. without holes. Cable glands can be
■■ The housing elements are connected with preinstalled on request.
special stainless steel screws. They are desi-
gned in such a way that no humidity can ■■ An additional terminal box can be
enter the screw hole. supplied on request.
Global presence
PFIFFNER Instr. Transformers Ltd PFIFFNER Technologie Ltd PFIFFNER Systems Ltd
5042 Hirschthal 5042 Hirschthal 4303 Kaiseraugst
Switzerland Switzerland Switzerland
This document has been drawn up with the utmost care. We cannot, however, guarantee that it is entirely complete, correct or up-to-date. ©Copyright
PFIFFNER / Subject to change without notice 2017.04
Hv High voltage
mV Medium voltage
LV low voltage