Professional Documents
Culture Documents
PARTS LIST
IMPORTANT
DO NOT DESTROY
● Read Carefully and understand safety
instructions before operating your
strapping machine.
● Keep this instruction manual in a
convenient location for future reference.
JK25-1F-02001-00
Contents
Instruction Manual
Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Safe Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Safety Warning Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Standard Accessories. . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Standard Specification. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Operation Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Changeover Procedure of TENSION MODE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Inner Adjustment Dials and Fuses. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Loading the Strap Coil. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Strap Threading Procedure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Parts List
Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Cam and Press Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Slide Table and Heater Set Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
FR Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Reel Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Body Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Electric Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Harness Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
1
Instruction Manual
Preface
Thank you very much for your purchase of a STRAPACK STRAPPING MACHINE.
We are prepared to offer extensive after sales service for our products through our distribution network.
To effectively use the strapping machine, daily maintenance and proper handling are important.
You are requested to have a complete understanding of this instruction manual for proper use and
maintenance of the machine over a long period of time.
Also,please carefully read the separate leaflet"Check that Seal !",to prevent any accidents during operation.
Safe Operation
This Instruction Manual has been prepared to provide you with important operation, maintenance and safety
information relating to your machine. It is essential that you read this paragraph carefully and understand it
before you attempt to operate your machine. The symbol is used as a safety warning mark. Carefully
read and follow the remarks and instruction given with this symbol.
Personal danger: DANGER indicates a potentially hazardous situation which, if not avoided,
DANGER
could result in death.
Personal danger: WARNING indicates a potentially hazardous situation which, if not avoided,
WARNING
could result in serious injury.
Possible damage to equipment: CAUTION indicates a potentially hazardous situation which,
CAUTION
if not avoided, may result in minor or moderate injury.
WARNING
shock.
GENERAL Carefully read and understand Manual.
CAUTION Before repairing or adjusting, turn off Power
WARNING
Read carefully and
Select Switch and unplug Power Supply
understand all procedures in
instruction manual before you
attempt to operate the
machine.
Cable. Follow instructions on the warning label.
Be sure to turn off main power
switch and disconnect power
supply cord before servicing
the machine.
Follow onstructions on all
safety alart labels.
2
Installation
Warning
● Never leave the Power Supply Cable on the ground where equipment, such as a forklift trucks or trolleys,
will pass. An exposed or damaged cable can cause electric shock.
● Do not place the Power Supply Cable any moving strap coil, or the Reel Unit. Fast moving strap
and rotating Reel can damage or break the cable. An exposed or broken cable cord can cause electric
shock. Replace damaged cables immediately.
● Never connect or disconnect the power plug with wet hands. It can cause electric shock.
● Use caution when dealing with strap. Fast moving strap can cause injury.
● Before moving the machine, be sure to turn off the Power Select Switch and unplug the Power Supply
Cable. Then move the machine by pushing. When the machine is pulled, legs can be caught under
the bottom of the machine.
● Do not alter the machine. An altered machine can cause injury.
● Be sure that the power cable is properly grounded.
● Be sure that the outlet you are inserting the Power Supply Cable into is connected to a properly grounded
Breaker.
Caution
● Do not use the machine in a place where it may be exposed to water or oil. Electrical wiring is connected inside
machine. Water or oil can cause electric shock and malfunction.
● Use only the specified Power Supply Cable.
● Do not pull the Power Supply Cable to move the machine. It will damage or break the Cord.
● Do not operate the machine in any way which is not specified in this manual.
● The measured sound power level at a distance of 1 metre from the surface of the machinery and at a height of
1.6 metres form the floor is less than 80 dB.
Peak Noise Level
Front side of the macnine 67dB
Back side of the macnine 68dB
Right side of the macnine 70dB
Left side of the macnine 69dB
Danger
● If Power must be supplied to the machine for servicing , proceed with caution.
● Only trained personnel should service the machine.
3
Operation
DANGER
● Before repairing , inspecting or cleaning , turn off the Power Select Switch and unplug the Power Supply
Cable.
WARNING
● Do not open the Upper Tables while the machine is operating. Rotating parts in the machine can cause injury.
● Do not touch the drive parts in the Sealing Unit while the machine is operating. They can cause injury.
● Do not touch the Heater while the machine is operating.
High temperature (about 400� C) of Heater can burn.
● Do not touch the hot Heater until it has completely cooled down.
● Do not put your hand , finger or any body part into a loop of strap while the machine is operating.
Fast moving strap can cause injury.
● Do not remove any Safety Covers and Panels while machine is operating.
● Do not touch any rotating parts in machine. They can cause injury.
● Insert the tip of strap beneath the Slide Table along the Right Bandway. Release the strap immediately
after the strap is inserted.Do not hold onto the strap.Your fingers might get caught in between the strap
and package causing injury.
CAUTION
● Stop operating the machine. Turn off the Power Select Switch and unplug the Power Supply Cable during
the occurrence of lightning. Lightning can cause cause permanent damage to the Control Box.
● Clean the machine regularly.
Standard Accessories
Please store them carefully.
The following accessories are supplied with the machine.
4
Standard Specification
Model i-10
Sealing Point
5
Operation Panel
Power Select Switch
This is the Power Supply Switch for the machine.
A Green Lamp A by the switch will be lit when the switch is at ON position.This Lamp A indicates
the connection of power supply. The Green Lamp starts to blink when the Power Select Switch is
turned on. The blink turns into a firm light when the heater temperature goes up an appropriate
temperature (approx. 45 sec.) and informs the machine is ready for its operation.
Reset Switch
By pressing this Reset Switch,the Sealing Unit will cycle one time and stop at Home position.
The strap will feed forward according to the setting on the Feed Dial.
FEED Switch
This is a jog switch that feeds the strap forward as long as the switch remains depressed. If the
strap length available is insufficient, press this switch to feed more strap until you have the desired
amount.
Feed Length Dial
This dial setting determines the length of strap fed off the Reel at the end of each cycle. Adjust
this dial to set the length of strap desired. Turning the dial clockwise will increase the length of
strap to be forwarded. Turning counterclockwise will shorten the amount of strap fed.Set according
your package size.
Tension Dial
Turning this dial clockwise makes the strap tension tighter, Turning counter-clockwise makes the
tension softer.
Error Indicator Lamp
Light ⇒ indicates Motor overload and malfunction of Sealing Unit.
After the repair, i-10 should be re-powerd with Power Select Switch.
Flash ⇒ indicates malfunction of Forwarding.
2 6 3 4 5 A
2. Mode Indicator
⑥ Error Lamp blinks TWICE quickly when turning ① Power Switch ON, and tells the machine is
in Soft Tension Mode. * ⑥ Error Lamp does not blink in the Normal Tension Mode.
6
Inner Adjustment Dials and Fuses
Heater Dial, Seal Prolongation Dial and Fuse are equipped inside of Machine.
[Heater]
i-10 applies the HEAT SEAL process to seal PP straps.
Check the Sealed section occasionally as Seal Efficiency is affected with the Heater Temperature.
WARNING Before adjusting machine,turn off the Power Select Switch and unplug the Power Supply Cable.
CAUTION Carefully read the separate leaflet"Check That Seal"prior to adjusting the heater temperature.
[FUSE]
The Fuses prevent overload accidents.
If a fuse blows out, turn off the power and unplug Power Supply Cable.
Replace the blown fuse according to the list below.
Fuse 1
Fuse 2
7
Loading the Strap Coil
WARNING Before loading strap, turn off the Power Supply Switch and unplug the Power Supply Cable.
Load the strap coil onto the Reel Unit without cutting retaining bands tied around the coil
1 2
8
Operation
After turning on the Power Select Switch, the heater element will reach operating temperature in
approximately 45 seconds.
Insert the tip of the strap beneath the Slide Table along the Right Bandway. Release the
WARNING strap immediately after the strap has been inserted. Do not hold the strap during tensioning
as fingers might be caught between the strap and the package which may result in injury.
1 . Place the package to be strapped on the Upper Tables and over the sealing point (Slide Table).
Insert the free end of the strap into the groove of the Right Bandway.
This will start the strapping operation and the tensioning of the strap around the package.
2 . After one strapping cycle (tensioning, cutting and sealing) is completed, a fixed length of strap will feed
forward automatically for the next strapping operation.
Strap length is adjustable by the Feed Length Dial and FEED Switch .(see page 6 ④ or ③)
3 . After strapping all of your packages, turn off the Power Select Switch.
9
Parts List
ORDERING INFORMATION
When ordering from this booklet, please specify (1) PART NUMBER, (2) DESCRIPTION, and (3)Quantity,
for each item. For the purpose of this listing, only those parts which are normally assembled are broken
down into their component pieces.
10
CAM AND PRESS GROUP
43
47
53
48
38 47
50
38 47
48
50
45
48
45 50
44
41 42
49
51 41 42
45
42
45 41 40
40 38
52 38
49
45
45
46
51
39
11
CAM AND PRESS GROUP
No. Parts No. Description Q'ty Note
1 615-01-10211 End Plate 1
2 660-01-31120 Right Block Spring 3
3 690-01-30130 Press Tension Spring 3
4 690-01-32130 Spring Hook 1
5 JK25-01-10111 M1 Motor Base 1
6 JK25-01-10133 Heater Cam 1
7 JK25-01-10143 Left Press Cam 1
8 JK25-01-10390 Center Press Cam 1
9 JK25-01-10163 Band Guide Cam 1
10 JK25-01-10174 Right Press Cam 1
11 JK25-01-10251 Limit Switch Bracket 1
12 JK25-01-10281 Bearing Holder 1
13 JK25-01-10291 Cam Shaft 1
14 JK25-01-10310 Cam Collar 9.3 1
15 JK25-01-10320 Cam Collar 19.8 1
16 JK25-01-10330 Cam Collar 9.8 1
17 JK25-01-10340 Cam Collar 6.7 1
18 JK25-01-10351 Limit Switch Cam 1
19 JK25-01-10360 Key 6x6x71 1
20 JK25-01-10380 Collar For Key 1
21 JK25-01-30111 Guide Box 1
22 JK25-01-30122 Right Block 1
23 JK25-01-30130 Cutter Upper 1
24 JK25-01-30140 Center Block 1
25 JK25-01-30151 Cutter Lower 1
26 JK25-01-30161 Left Block 1
27 JK25-01-30170 Cam Follower Holder 3
28 JK25-01-50112 Right Frame 1
29 JK25-01-50122 Left Frame 1
30 JK25-05-10190 Left Shooter Bracket 1
31 JK25-07-10110 Label : Indication : M1 1
32 JK25-07-10110 Label : Indication : LS2 1
33 0111-104008 HBS,M4X8 2
34 0111-104010 HBS,M4x10 6
35 0111-104015 HBS,M4x15 2
36 0111-105008 HBS,M5x 8 4
37 0111-105010 HBS,M5x10 9
38 0111-105012 HBS,M5x12 4
39 0131-106015 HB,M6x15 1
40 0161-102510 PMS,M2.5x10 2
41 0181-104001 HN,M4 3
42 0261-104015 HSS,M4X15 3
43 0261-104022 HSS,M4X22 1
44 0321-040810 SW,M4 4
45 0321-050905 SW,M5 12
46 0321-061215 SW,M6 1
47 0411-304020 SpringPin,Ø4x20 3
48 0411-305014 SpringPin,Ø5x14 3
49 0511-132012 Stop Ring S-20 2
50 0611-020635 Bearing 635ZZ 3
51 0611-026904 Bearing 6904ZZ 2
52 0750-110098 Micro Switch , ABS111654 1
53 0780-160244 DC Geared Motor Z2D30-24GN-30S, 2GN60K(for Cam Shaft) 1
12
SLIDE TABLE AND HEATER SET GROUP
13
SLIDE TABLE AND HEATER SET GROUP
No. Parts No. Description Q'ty Note
1 690-01-20180 Band Guide Arm Spring 1
2 690-01-20190 Slide Table Arm Spring 1
3 690-01-20320 Striker 1
4 690-01-22120 Band Guide Arm 1
5 690-01-40120 Heater Tension Spring 1
6 518-01-41110 Heater Nichrome Plate 1
7 690-01-41123 Heater Base 1
8 690-01-41132 Insulating Board A 2
9 690-01-41141 Insulating Board B 1
10 JK25-06-10420 Heater Lead Line 2
11 690-01-41161 Heater Fixing Plate 1
12 690-01-42120 Heater Arm 1
13 900-01-20211 Slide Tasble Screw, M5x18 2
14 JK25-01-20113 Band Guide 1
15 JK25-01-20120 Switch Guard 1
16 JK25-01-20141 Arm Shaft 1
17 JK25-01-20151 Band Width Plate 1
18 JK25-01-20160 Slide Table 1
19 JK25-01-20171 Slide Table Support 1
20 JK25-01-20180 Heater Arm Collar 1
21 JK25-01-20190 Slide Table Arm 1
22 JK25-01-40150 Heater Bracket 1
23 JK25-01-40160 Heater Bolt 2
24 JK25-01-50130 Frame Stay 1
25 JK25-07-10110 Label : Indication : LS1 1
26 JK25-07-10110 Label : Indication : H 1
27 0036-103006 PMS-SP,M3x 6 2
28 0037-103015 PMS-S,M3x15 2
29 0111-104008 HBS,M4X8 2
30 0111-104012 HBS,M4x12 2
31 0111-105010 HBS,M5x10 4
32 0111-105020 HBS,M5x20 3
33 0111-105040 HBS,M5x40 1
34 0132-105010 HB,M5X10(SUS) 2
35 0252-105010 HFS,M5x 10(SUS) 4
36 0161-105060 PMS,M5x60 1
37 0181-105001 HN,M5 2
38 0182-105001 HN,M5 (SUS) 2
39 0311-041008 PW,M4 2
40 0311-051208 PW,M5 1
41 0321-040810 SW,M4 2
42 0321-030905 SW,M5 3
43 0322-050913 SW,M5 (SUS) 2
44 0411-305015 SpringPinØ5x15 1
45 0411-305020 SpringPinØ5x20 1
46 0520-141210 Flanged Bush 80F-1210 4
47 0520-181210 Bush 80B-1210 2
48 0611-020635 Bearing 635ZZ 2
49 0750-110105 Micro Switch VX-01-1A2 1
50 0890-480257 Waning Label : High Temperature 1
14
FR GROUP
15
FR GROUP
No. Parts No. Description Q'ty Note
1 JK25-01-70114 FR Unit Base 1
2 JK25-01-70122 FR Roller 1
3 JK25-01-70134 Touch Roller 1
4 JK25-01-70184 Band Guide Block(Upper) 1
5 JK25-01-70213 Right Bandway Adjuster 1
6 JK25-01-70221 Band Guide Block(Lower 1
7 JK25-01-70243 FR Shooter Cover 1
8 JK25-01-70273 Touch Roller Arm 1
9 JK25-01-70291 Touch Roller Collar 1
10 JK25-01-70330 Touch Roller Spring Bracket 1
11 JK25-01-70340 Key 4x4x13 1
12 JK25-01-70360 Touch Roller Spring Hook 1
13 JK25-01-70371 Touch Roller Arm Collar 1
14 JK25-01-70381 Shooter Adjuster 1
15 JK25-01-70391 Under Shooter Adjuster 1
16 JK25-01-70410 Touch Roller Spring 1
17 JK25-01-70420 M2 Motor Base 1
18 JK25-07-10110 Label : Indication : M2 1
19 0111-104006 HBS,M4X6 2
20 0111-104008 HBS,M4X8 1
21 0111-104012 HBS,M4x12 2
22 0111-105008 HBS,M5x 8 6
23 0111-105010 HBS,M5x10 1
24 0111-105015 HBS,M5x15 4
25 0111-105025 HBS,M5x25 4
26 0111-105030 HBS,M5x30 1
27 0111-106030 HBS,M6x30 1
28 0151-104010 TMS,M4x10 2
29 0161-104006 PMS,M4X6 2
30 0181-105001 HN,M5 2
31 0181-106003 HN,M6 1
32 0311-041008 PW,M4 2
33 0311-041516 PW,M4(4.5X15Xt1.6) 1
34 0311-061310 PW,M6 1
35 0321-040810 SW,M4 1
36 0321-050913 SW,M5 11
37 0321-061215 SW,M6 1
38 0511-121910 Stop Ring H-19 1
39 0611-020626 Bearing,626zz 2
40 0611-026900 Bearing,6900zz 1
41 0780-160245 DC Geared Motor SUTOLE-09121501 1
(Z4D65-24GN-30S, 4GN12.5K special)
16
REEL GROUP
17
REEL GROUP
No. Parts No. Description Q'ty Note
1 518-04-10390 Reel Nut Handle;Type O 1
518-07-10230 Label : Reel Nut Handle : Left : J (1) J
2
518-07-10240 Label : Reel Nut Handle : Left : E 1 A,CE
3 631-04-10180 Reel In Circular 1
4 631-04-10190 Reel Out Circular 1
631-04-10280 Reel Center Guide ( E ,J spec) 3 J,CE
5
631-25-17470 Reel Center Guide ; Ø 230 (A spec.) (3) A
6 631-04-10290 Band Guide Roller 1
7 631-04-10331 Reel Shaft Cap : R 1
8 631-04-10342 Reel Shaft Cap : F 1
9 631-04-21122 Brake Liner 1
10 633-04-10180 Washer for Brake Liner 1
11 660-04-20140 Reel Brake Spring 1
12 660-07-10170 Sticker (Arrow) 1
13 JK25-04-10111 Reel Bracket 1
14 JK25-04-10121 Reel Bracket Support 1
15 JK25-04-10131 Reel Brake Arm 1
16 JK25-04-10141 Reel Shaft 1
17 0111-105010 HBS,M5x10 8
18 0111-106025 HBS,M6x25 7
19 0151-105008 TMS,M5X8 4
20 0161-106050 PMS,M6X50 2
21 0181-106003 HN,M6 6
22 0311-051208 PW,M5 8
23 0311-062016 PW,M6(Ø6.5XØ20xt1.0) 1
24 0321-050913 SW,M5 8
25 0321-030106 SW,M6 7
26 0421-106030 RIVET Ø6x30 1
27 0511-131010 Stop Ring S-10 1
28 0511-132512 Stop Ring S-25 2
29 0512-210600 PN-6 1
30 0611-026005 Ball Bearing 6005zz 2
18
21
BODY GROUP
21
11
22
22
22
22
21
20 26
23
32 23
10 21
23
26 23
20
12
8
28
14
7
18
28 25
13 24
19
25
2
25 17
17 29 19
25
27 17 6
27
16 4
15
25
31 18
5
9
30
19
BODY GROUP
No. Parts No. Description Q'ty Note
1 518-80-10150 Table Work Guide 2 A,CE
2 249-04-11120 Free Angle Roller 1
3 615-05-10190 Caster Support 4
4 631-04-10290 Band Guide Roller 1
5 JK25-05-10230 Label : StraPack 2
6 JK25-04-10151 Liftinng Bracket 1
7 JK25-05-10111 Body 1
8 JK25-05-10122 Sealing Unit Base 1
9 JK25-05-10131 Leg 4
JK25-05-10210 Upper Table Front (J) (1) J
10
JK25-25-10110 Upper Table Front (Ex) 1 A,CE
JK25-05-10220 Upper Table Rear (J) (1) J
11
JK25-25-10120 Upper Table Rear (Ex) 1 A,CE
12 JK25-05-10162 Left Shooter 1
JK25-06-11120 Label : Operation Panel (J) (1) J
13
JK25-80-10310 Label : Operation Panel (EX) 1 A,CE
14 JK25-07-10110 Label : Indication : PUSH 1
JK25-07-10130 Label : How to load strap(Japanese) (1) J
15
JK25-80-10320 Label : How to load strap(English) 1 A,CE
16 JK25-07-10140 Label : i-10 1
17 0111-105008 HBS,M5x 8 4
18 0111-105010 HBS,M5x10 18
19 0291-105010 HBB,M5x10 4
20 0141-105010 FMS,M5X10 2
21 0142-105010 FMS,M5X10 (SUS) 4
22 0162-106010 PMS,M6X10 (SUS) 4 A,CE
23 0182-106003 HN,M6 (SUS) 4 A,CE
24 0311-051208 PW,M5 12
25 0321-050913 SW,M5 22
26 0322-060913 SW,M6 (SUS) 4 A,CE
27 0421-106030 Rivet Ø 6x30 2
28 0491-105001 HN-F M5 2
29 0512-210600 PN-6 2
30 0890-130012 Caster , 415K-R65 4
0890-480090 Warning Label : General (Japanese) (1) J
31
0890-480129 Warning Label : General (English) 1 A,CE
0890-480092 Warning Label : Upper Table (Japanese) (1) J
32
0890-480128 Warning Label : Upper Table (English) 1 A,CE
20
ELECTRIC GROUP
21
ELECTRIC GROUP
No. Parts No. Description Q'ty Note
690-06-10291 Heater Transformer; J Spec (1) J
1 690-83-10110 Heater Transformer; A Spec (1) A
690-86-10110 Heater Transformer; CE Spec 1 CE
2 900-06-10160 Smoke Fan,JF0825S2M 1
3 JK25-06-10274 IC Box 1
4 JK25-06-10293 Power Box 1
5 JK25-06-10380 Fan Reduce Plate 1
6 JK25-06-10430 I.C Board PB-172 1
7 JK25-06-10440 Power Supply Board PB-170A 1
8 JK25-07-10110 Label: Indication : Fuse 20A 1
9 JK25-07-10110 Label: Indication : Seal TimeHeater 1
10 JK25-07-10110 Label: Indication : SFM 1
11 JK25-07-10110 Label: Indication : Fuse 6A 2
12 JK25-07-10110 Label: Indication : PE 1
13 JK25-07-10110 Label: Indication : TR 1
14 0151-104006 TMS,M4x6 7
15 0162-004006 PMS,M4X6(SUS) 6
16 0161-103018 PMS,M3X18 10
17 0161-104040 PMS,M4X40 4
18 0181-104001 HN,M4 4
19 0321-040810 SW,M4 4
20 0321-030805 SW,M3 10
21 0332-040804 TW,M4(SUS) 6
22 0710-130036 Power Switch : LLK35C1 1
23 0710-180004 Volume Dial K-8075 2
24 0730-130030 Fuse Holder F-400-01B1 3
25 0730-150046 Noise Filter 1
26 0730-170060 Fuse 6AØ6.4x30 250V 2
27 0730-170200 Fuse 20A6.4x30 250V ( for M2 ) 1
28 0740-160001 Nylon Clip SL-4N (Clamp CC 06) 1
29 0740-230003 Spacer 10
30 0740-150015 Slit Tube,Ø 15 x 100 : KC-15HB (190 mm) 1
31 0740-150016 Slit Tube,Ø 7x 100 : KC-7HB (450 mm) 1
32 0740-170008 Nylon Bush KG-012 1
33 0780-170014 Smoke Fan Guard 2
0890-480115 Warning Label : Electrical Shock (Japanese) (2) J
34
0890-480126 Warning Label : Electrical Shock (English) 2 A,CE
35 0890-480258 Earth Seal 4
36 0740-170007 Nylon Bush NB-024 1
22
23
HARNESS GROUP
No. Parts No. Description Q'ty Note
JK25-80-10112 Power Supply Cord : EX 1 A,CE
1
518-06-21111 Power Supply Cord :J (1) J
JK25-86-10120 Wire Harness (for M1 Motor): EX 1 A,CE
2
JK25-06-10231 Wire Harness (for M1 Motor):J (1) J
JK25-86-10130 Wire Harness (for M2 Motor):EX 1 A,CE
3
JK25-06-10241 Wire Harness (for M2 Motor):J (1) J
JK25-86-10110 Wire Harness (for Power Supply 24V,Smoke Fan) :EX 1 A,CE
4
JK25-06-10221 Wire Harness (for Power Supply 24V,Smoke Fan) :J (1) J
5 518-06-21260 Wire Harness (for Earth) (1) J
6 JK25-06-10182 Wire Harness (for 100V,110V) 1 J,A
7 JK25-06-10261 Wire Harness (for Limit Switch ) :J,EX 1
8 JK25-06-10341 Wire Harness (for LED of IC Board): J,EX 1
9 JK25-06-10500 Wire Harness (Additiol Line for Noise Filter) 1
10 JK25-06-10510 Wire Harness (Additiol Line for Noise Filter) 1
11 JK25-06-10520 Wire Harness (for Noise Filter:Output Heater Transformer) 1
12 0740-171802 Cable Tie (Large) 1
24
☐ Strapack Corporation
7-16-14 Ginza, Chuo-ku, Tokyo 104-0061 Japan
Tel : +81 3 6278 1805
Fax: +81 3 6278 1806
Email: info@strapack.com
Web site: www.strapack.com
☐ Strapack, Inc.
Miller/Bevco 6209 Richards Dr Shawnee, KS 66216
Tel: 800-821-2177 or Parts@MillerBevco.com Fax:
913-322-1729
☐ Strapack N.V./S.A.
Uilenbaan 200 B-2160 Wommelgem Belgium
Tel : +32 (0) 3 355 1520
Fax: +32 (0) 3 355 1521
Ⓒ 2010