You are on page 1of 3

Design a welded Plate Girder with necessary stiffeners for the following given loading.

Assume that the Design a welded Plate Girder with nece


girder is laterally supported throughout the span. An uniformly distributed load "X" kN/m along with Assume that the girder is laterally supp
Central point load "Y" kN is acting on the span of girder "Z"m. loads "X" kN and "Y" kN are acting fro

Central
Span of
UDL Point
SR NO NAME OF STUDENT (ROLL NO) Girder SR NO
kN/m (X) Load
1 60 (Z) m
KRUTIKA KALYANI SONALI (Y)80kN 22.50 11
2 SAVITA SHIVANI JANHAVI 55 75 20.00 12
3 AAKANKSHA GITA MAYURI 50 70 25.00 13
4 PRIYANKA SEJAL RENUKA 45 65 23.00 14
5 VENKATESH BHUSHAN RAHUL 60 150 20.50 15
6 GAURAV RAHUL SHAILESH 55 140 24.50 16
7 ARBAZ VINAY RAHUL 50 160 23.50 17
8 ROHIT PRATIK VIKRANT 45 170 21.00 18
9 VAIBHAV ABHIJIT UJVAL 55 150 20.5 19
10 20
Design a welded Plate Girder with necessary stiffeners for the following given loading. Design a welded Plate Girder with necessary stiffeners for the fo
Assume that the girder is laterally supported throughout the span. Assume the two point loading. Assume that the girder is laterally supported throughout
loads "X" kN and "Y" kN are acting from the L/3 distance from the either support. the single central point load "X" kN is acting at the centre of the

Right Left
Span of
NAME OF STUDENT (ROLL NO) (with
Point Point
Girder SR NO NAME OF STUDENT (ROLL NO)
udl 50) Load (X) Load (X)
DIWESH JAYESH AJAY 250 250 (Z) m
22.50 21 SHANTANU LAXMIKANT
kN kN
KETAN CHAITANYAMAYUR 300 300 22.50 22 YOGITA KAVERI
AJINKYA ZAID SANKET 150 150 25.50 23 UDAY ABHISHEK
AMOL ADITYA MAYUR 175 175 23.00 24 SOM HEMRAJ
SAYALI NEHA DIVYA 210 210 22.00 25 GAURI ANJALI
SUDARSHAN MAYUR PIYUSH 225 225 24.00 26 ROHIDAS GANESH
DIVYA KALYANI SUVARNA 200 200 23.50 27 MOHIT SHRIPAL
HARSHVARDHANAMOL YASHODIP 240 240 21.50 28 PRATIKSHA AKASH
TEJASHRI SHRADDHA MOKSHADHA 180 200 22 29 GAURI SNEHAL
30 NEHA ANKITA
er with necessary stiffeners for the following given
rder is laterally supported throughout the span. Assume
"X" kN is acting at the centre of the span.

Central
Span of
Point
TUDENT (ROLL NO) UDL Girder
Load
JANARDHAN 60 300 (Z) m
24.50
(X) kN
RAVINA 70 315 24.00
BHAVESH 60 330 21.00
TUSHAR 50 285 25.00
MANSI 60 270 24.50
MANGESH 70 320 20.50
SHUBHANGI 80 330 22.50
SHRIPAL 90 300 25.00
SHUBHANGI 60 340 20.00
MADHURI 70 335 24.00

You might also like