Professional Documents
Culture Documents
400
UNIT NO. 646
PN. 646-45 thru 72
DATE 10-Oct-2003
Stradaset II
Compression-Set Packer
The Weatherford Stradaset II Compression-Set Packer is a straddle packer
assembly designed to isolate and selectively stimulate or test predetermined
intervals or perforations. The spacing between the elements is adjustable to
any length, down to a minimum of 12 in. The Stradaset II is normally run in
conjunction with a Fluid Control Valve and retrievable Equalizing Standing
Valve.
Features
• Three-element packoff on either side of interval
• Internal bypass across both sets of elements
• Booster sleeve between elements reduces packoff force
• Hydraulic hold-down buttons
• Adjustable interval spacing
• Tubing connections are standard on full-bore mandrel
• Quarter-turn initial set, pickup unset, slack off reset
• Manual Jay mechanism allows repositioning without rotating pipe
Benefits
• Easy to run and operate
• Easy and economical to redress
• Simple to operate over long intervals
Applications
• Perforation cleanout
• Selective acidizing and stimulation
Weatherford products and services are subject to Weatherford’s standard terms and conditions. For more information concerning the full line of Weatherford products and
services, please contact your authorized Weatherford representative. Unless noted otherwise, trademarks and servicemarks noted herein are the property of Weatherford. 1 of 19
© 2003. Weatherford. All rights reserved.
INDEX NO. 400
UNIT NO. 646
PN. 646-45 thru 72
DATE 10-Oct-2003
Weatherford products and services are subject to Weatherford’s standard terms and conditions. For more information concerning the full line of Weatherford products and
services, please contact your authorized Weatherford representative. Unless noted otherwise, trademarks and servicemarks noted herein are the property of Weatherford. 2 of 19
© 2003. Weatherford. All rights reserved.
INDEX NO. 400
UNIT NO. 646
PN. 646-45 thru 72
DATE 10-Oct-2003
RUNNING PROCEDURE
Make up the Stradaset II with the appropriate spacing between the sets of packing elements, together with a lower
seating nipple (the 7” Stradaset II incorporates a built in 1.50” I.D. seating nipple, other size seating nipples are
available (1.781) if specified at the time of purchase or can be added later. On the 4-1/2”, 5”, and 5-1/2”, a separate
seating nipple is required to be run below the packer, 1.188” size for the 4-1/2” and 5” and 1.375” size for the 5-1/2”),
the optional Weatherford Type B Rotational Release Unloader, and a casing collar locator.
SETTING PROCEDURE
Run the complete assembly to depth so that the Stradaset II is located in a casing joint below the first set of
perforations to be treated. Pick up and slack off to establish true slack-off and pick-up weights. Set the packer by
picking up on the tubing, rotating ¼ turn to the left at the packer and slacking off sufficient weight to expand the slips
and pack off both sets of packing elements.
Drop (in fluid) the correct size Equalizing Standing Valve and allow it to fall to the seating nipple. Pressure up on the
tubing to seat the Equalizing Standing Valve in the seating nipple and to check for leaks in both the packer and
tubing. After testing, unset the packer by picking up on the tubing. The packer may now be raised to the first set of
perforations.
RELEASING PROCEDURE
The packer is released by straight pick-up on the tubing string. After the tubing and annulus pressure equalizes, the
packer may be moved up the hole and reset. To move down the hole, pick-up on the tubing string, rotate the tubing ¼
turn to the right at the tool to reset to the running position.
Weatherford products and services are subject to Weatherford’s standard terms and conditions. For more information concerning the full line of Weatherford products and
services, please contact your authorized Weatherford representative. Unless noted otherwise, trademarks and servicemarks noted herein are the property of Weatherford. 3 of 19
© 2003. Weatherford. All rights reserved.
INDEX NO. 400
UNIT NO. 646
PN. 646-45 thru 72
DATE 10-Oct-2003
5-1/2"
646-55 645-55-865** 645-55-850** ** ** ** **
1 FT.
646-57 645-55-865** 645-57-850** ** ** ** **
646-55 645-55-865** 645-55-850** 646-55-711 ** 3-1/2" EU 3-1/2" EU
2 FT.
646-57 645-55-865** 645-57-850** 646-55-711 ** 645-55-885 645-55-880
646-55 645-55-865** 645-55-850** 645-55-009 646-55-712 3-1/2" EU 3-1/2" EU
3 FT.
646-57 645-55-865* 645-57-850** 645-55-009 646-55-712 645-55-885 645-55-880
Weatherford products and services are subject to Weatherford’s standard terms and conditions. For more information concerning the full line of Weatherford products and
services, please contact your authorized Weatherford representative. Unless noted otherwise, trademarks and servicemarks noted herein are the property of Weatherford. 4 of 19
© 2003. Weatherford. All rights reserved.
INDEX NO. 400
UNIT NO. 646
PN. 646-45 thru 72
DATE 10-Oct-2003
ASSEMBLY 1
1. Install valve seal (25) and o-rings (20 & 22) into seal receptacle (21). Install seal 2
retainer (23) to seal receptacle (21). [ Sizes 4-1/2” & 5”; install the valve seal (25)
3
and o-ring (24) into the seal retainer (23). Screw the seal retainer (23) on the seal
4
receptacle (21). 5
2. Slide seal receptacle (21) onto mandrel (2) and install compensating mandrel (16) to 7
8
seal receptacle (21). Insure that shoulder of the mandrel (2) is trapped between the 9
through hold down straps (12) and into hydraulic hold down (15). 30
6. Slide strap retainer (13) over hold down straps (12) and hydraulic hold down (15). 31
32
Install hold down cap (5) to hydraulic hold down (15) and over hold down straps (12). 31
[ Sizes 4-1/2” & 5”; slide the strap retainer (13) over the hold down straps (12) and 30
the hydraulic hold down (15). Install o-ring (6) into hold down cap (5). Install the hold 33
34
down cap (5) onto the hydraulic hold down (15).] 35
36
37
7. Install o-rings (7 & 14) into the hydraulic hold down (15) and install o-ring (4) into the
38
hydraulic hold down extension (3). Install the hydraulic hold down extension (3) to
the hydraulic hold down (15). [ not required on the 4-1/2” & 5”] 39
8. Install central body (26) onto hydraulic hold down (15). NOTE: Make sure that the 42
40
43
holes in the central body (26) are close to the unloading valve body (27). Slide the 44
46
hydraulic hold down assembly onto mandrel. The central body (26) will slide over 47
seal retainer (23), seal receptacle (16), and compensating piston (18).
9. Install o-ring (28) into unloading valve body (27). Slide unloading valve body (27)
43
over lower end of mandrel (2) and install onto central body (26). 46
10. Slide the middle sleeve (39) onto the rubber mandrel (29). Install o-ring (34) in the 48
51
booster spacer (33) and slide the booster spacer (33) onto the rubber mandrel (29). 52
53
Slide the packing elements (30 & 32) and the rubber spacers (31) onto the rubber
54
mandrel (29).
55
11. Slide the mandrel cap (37) inside the middle sleeve (39) and install onto the mandrel
56
(2). [Sizes 5” & 7”; install the rubber gage ring (45) onto the unloading valve body 57
(27).] 58
12. Install rubber mandrel (29) to the unloading valve body (27) by placing a bar through 59
a slot in the middle sleeve (39) and a slot in the rubber mandrel (29). 60
13. Install the cap screw (35) through the mandrel cap (37) to the flat bottom holes in the 61
mandrel (2). 62
14. Install the o-rings (46) into the seals (43). Slide the seals (43), upper seal spacer 64
(47), and lower seal spacer (48) onto the seal mandrel (38).
65
15. Install the seal mandrel cap (52) onto the seal mandrel (38). [Size 7”, install o-ring
(49) into the 1.50” seat (50) and screw the seat (50) into the seal mandrel (38).
16. Install the seal mandrel (38) onto the mandrel (2).
17. Slide the lower rubber retainer (51) onto the lower mandrel (54) and install the lower
cone (53) onto the lower rubber retainer (51). [Size 5” & 7”; install the rubber gage
ring (45) onto the lower rubber retainer (51).]
Weatherford products and services are subject to Weatherford’s standard terms and conditions. For more information concerning the full line of Weatherford products and
services, please contact your authorized Weatherford representative. Unless noted otherwise, trademarks and servicemarks noted herein are the property of Weatherford. 5 of 19
© 2003. Weatherford. All rights reserved.
INDEX NO. 400
UNIT NO. 646
PN. 646-45 thru 72
DATE 10-Oct-2003
18. Slide the packing elements (30 & 32) and the rubber spacer (31) onto the lower
1
mandrel (54).
19. Install the drag blocks (59) and drag block springs (60) into the drag block body (55).
2
20. Slide the drag block retainer (61) over the control body assembly (55) and the drag
blocks (59). 3
[Size 7”; slide the drag block retainer (61) over the control body (55) and drag blocks 4
5
(59). Slide the retaining ring (63) onto the J-body (64).]
7
21. Install the J-body (64) onto the control body (55). Install set screws (62). 8
9
22. Assemble the lower slip springs (58) to the lower slips (56) using the slip screws (57). 10
Install the lower slips (56) into the control body (55). 11
23. Slide the lower slips (56) and the control body (55) onto the lower mandrel (54). 12
13
14
24. Install the bottom sub (65) onto the lower mandrel (54). [Sizes 5” & 7”; install 16
15
17
the rubber gage ring (45) onto the center sub (44). 18
19
25. Install the center sub (44) onto the lower mandrel (54). 20
21
22
26. Lubricate the outside diameter of the seals (43), the inside diameter of the 25
23
30. Install lock screws (42) into the center sub (44).
39
31. Install brass shear screws (36) into the middle sleeve (39). The number of 40
42
brass shear screws can be adjusted, each shear screw required 1,200 lbs. of 44
43
46
force to shear.
47
43
46
48
51
52
53
54
55
56
57
58
59
60
61
62
64
65
Weatherford products and services are subject to Weatherford’s standard terms and conditions. For more information concerning the full line of Weatherford products and
services, please contact your authorized Weatherford representative. Unless noted otherwise, trademarks and servicemarks noted herein are the property of Weatherford. 6 of 19
© 2003. Weatherford. All rights reserved.
INDEX NO. 400
UNIT NO. 646
PN. 646-45 thru 72
DATE 10-Oct-2003
DETAIL 4-1 1
C
4 1/2" AND 5" HOLD DOWN CAP O-RING D
E 2
3
B
2 5 6 F 4
5
G 7
8
9
10
11
12
13
14
15
16
17
J 18
19
DETAIL 4-2 20
21
4 1/2" AND 5" SEAL RETAINER O-RING 22
23
25
26
27
24 25 29
28
H
2 23 26 30
31
H
32
31
H
30
33
H 34
35
36
37
38
A
DETAIL 5-1 39
4 1/2" AND 5" SEAL RETAINER O-RING 40
42
43
H 44
46
47
41 44 48 H
39 40 42 45 30 H 43
46
H 48
51
52
53
54
55
56
57
DETAIL 5-2 58
7" RETAINING RING L
59
60
61
62 54 62
64
59 61 55 63 64
65
Weatherford products and services are subject to Weatherford’s standard terms and conditions. For more information concerning the full line of Weatherford products and
services, please contact your authorized Weatherford representative. Unless noted otherwise, trademarks and servicemarks noted herein are the property of Weatherford. 7 of 19
© 2003. Weatherford. All rights reserved.
INDEX NO. 400
UNIT NO. 646
PN. 646-45 thru 72
DATE 10-Oct-2003
DIMENSIONAL DATA C
D
DIMENSIONS (IN./mm.) E
PRODUCT
NO. A B C D E F B
F
A
DIMENSIONS (IN./mm.)
PRODUCT
NO. G H J K L M
H
Weatherford products and services are subject to Weatherford’s standard terms and conditions. For more information concerning the full line of Weatherford products and
services, please contact your authorized Weatherford representative. Unless noted otherwise, trademarks and servicemarks noted herein are the property of Weatherford. 8 of 19
© 2003. Weatherford. All rights reserved.
INDEX NO. 400
UNIT NO. 646
PN. 646-45 thru 72
DATE 10-Oct-2003
PARTS LIST
4-1/2" 4-1/2"
ITEM
DESCRIPTION 9.5 - 11.6 11.6 - 13.5
NO.
646-45 646-46
1 TOP COUPLING 22CB-01 22CB-01
2 INNER MANDREL 646-45-210 646-45-210
3 HOLD DOWN EXTENSION NOT REQ'D NOT REQ'D
4 O-RING* NOT REQ'D NOT REQ'D
5 HOLD DOWN CAP 613-45-370 613-45-370
6 O-RING* 050-90-333 050-90-333
7 O-RING* 050-90-236 050-90-236
8 HOLD DOWN BUTTON 613-45-140 (8) 613-45-140 (8)
9 O-RING* 050-90-125 (8) 050-90-125 (8)
10 HOLD DOWN SCREW* 005-03-006 (4) 005-03-006 (4)
11 HOLD DOWN SPRING 613-45-975 (48) 613-45-975 (48)
12 HOLD DOWN STRAP 613-45-360 (4) 613-45-360 (4)
13 STRAP RETAINER 613-45-650 613-45-650
14 O-RING* 050-90-235 050-90-235
15 HOLD DOWN BODY 613-45-321 613-45-321
16 COMPENSATING MANDREL 613-45-240 613-45-240
17 O-RING* 050-90-234 050-90-234
18 COMPENSATING PISTON 613-45-710 613-45-710
19 O-RING* 050-90-232 050-90-232
20 O-RING* 050-90-231 050-90-231
21 SEAL RECEPTACLE 613-45-730 613-45-730
22 O-RING* NOT REQ'D NOT REQ'D
23 SEAL RETAINER 613-45-530 613-45-530
24 O-RING* 050-90-230 050-90-230
25 VALVE SEAL* 613-45-520 613-45-520
26 CENTRAL BODY 613-45-381 613-45-381
27 VALVE BODY 613-45-350 613-45-350
28 O-RING* 050-90-231 050-90-231
29 RUBBER MANDREL 645-45-220 645-45-220
30 PACKING ELEMENT 602-45-512 (4) 602-45-512 (4)
31 RUBBER SPACER 611-45-840 (4) 611-45-840 (4)
32 PACKING ELEMENT 602-45-511 (2) 602-45-511 (2)
33 BOOSTER SPACER 645-45-860 645-45-860
Weatherford products and services are subject to Weatherford’s standard terms and conditions. For more information concerning the full line of Weatherford products and
services, please contact your authorized Weatherford representative. Unless noted otherwise, trademarks and servicemarks noted herein are the property of Weatherford. 9 of 19
© 2003. Weatherford. All rights reserved.
INDEX NO. 400
UNIT NO. 646
PN. 646-45 thru 72
DATE 10-Oct-2003
PARTS LIST
4-1/2" 4-1/2"
ITEM
DESCRIPTION 9.5 - 11.6 11.6 - 13.5
NO.
646-45 646-46
34 O-RING* 050-90-232 050-90-232
35 CAP SCREW 002-C6-008 (3) 002-C6-008 (3)
36 SHEAR SCREW** 007-C4-006** 007-C4-006**
37 MANDREL CAP 645-45-130 645-45-130
38 SEAL MANDREL 646-45-225 646-45-225
39 MIDDLE SLEEVE 645-45-865 645-45-865
40 LOCK SCREW* 003-C4-006 (6) 003-C4-006 (6)
41 O-RING* NOT REQ'D NOT REQ'D
42 LOCK SCREW* 003-C4-006 (6) 003-C4-006 (6)
43 SEAL* 646-45-520 (2) 646-45-520 (2)
44 CENTER SUB 645-45-850 645-45-850
45 RUBBER GAGE RING NOT REQ'D NOT REQ'D
46 O-RING* 050-90-132 (2) 050-90-132 (2)
47 UPPER SEAL SPACER 646-45-525 646-45-525
48 LOWER SEAL SPACER 646-45-526 646-45-526
49 1.500" SEAT O-RING NOT REQ'D NOT REQ'D
50 1.500" SEAT NOT REQ'D NOT REQ'D
51 LOWER RUBBER RETAINER 602-45-850 602-45-850
52 SEAL MANDREL CAP 646-45-245 646-45-245
53 LOWER CONE 665-45-410 665-45-410
54 LOWER MANDREL 646-45-230 646-45-230
55 CONTROL BODY 665-45-330 665-45-330
56 LOWER SLIP 691-45-115X (4) 691-45-115X (4)
57 LOWER SLIP SCREW 665-45-330 665-45-330
58 SLIP SPRING 350-55-956 (8) 350-55-956 (8)
59 DRAG BLOCK 090-45-900 (4) 090-40-900 (4)
60 DRAG BLOCK SPRING* 091-00-900 (16) 091-00-900 (16)
61 DRAG BLOCK RETAINER NOT REQ'D NOT REQ'D
62 LOCK SCREW* 003-C4-006 (4) 003-C4-006 (4)
63 RETAINING RING NOT REQ'D NOT REQ'D
64 J-BODY*** 610-45-37X 610-45-37X
65 BOTTOM SUB 645-45-630 645-45-630
Common repair parts
**Quantities varies from 1 to 9 depending on shear required.
***J-body options: right hand automatic, X-O; left hand automatic, X-1;
right hand manual, X-2; left hand manual,X-3
Weatherford products and services are subject to Weatherford’s standard terms and conditions. For more information concerning the full line of Weatherford products and
services, please contact your authorized Weatherford representative. Unless noted otherwise, trademarks and servicemarks noted herein are the property of Weatherford. 10 of 19
© 2003. Weatherford. All rights reserved.
INDEX NO. 400
UNIT NO. 646
PN. 646-45 thru 72
DATE 10-Oct-2003
PARTS LIST
5" 5"
ITEM
DESCRIPTION 15.0 - 18.0 11.5 - 15.0
NO.
646-52 646-50
1 TOP COUPLING 22CB-01 22CB-01
2 INNER MANDREL 646-45-210 646-45-210
3 HOLD DOWN EXTENSION NOT REQ'D NOT REQ'D
4 O-RING* NOT REQ'D NOT REQ'D
5 HOLD DOWN CAP 613-50-370 613-50-370
6 O-RING* 050-90-333 050-90-333
7 O-RING* 050-90-236 050-90-236
8 HOLD DOWN BUTTON 613-50-140 (8) 613-50-140 (8)
9 O-RING* 050-90-125 (8) 050-90-125 (8)
10 HOLD DOWN SCREW* 005-03-006 (4) 005-03-006 (4)
11 HOLD DOWN SPRING 613-45-975 (48) 613-45-975 (48)
12 HOLD DOWN STRAP 613-45-360 (4) 613-45-360 (4)
13 STRAP RETAINER 613-50-650 613-50-650
14 O-RING* 050-90-235 050-90-235
15 HOLD DOWN BODY 613-50-321 613-50-321
16 COMPENSATING MANDREL 613-45-240 613-45-240
17 O-RING* 050-90-234 050-90-234
18 COMPENSATING PISTON 613-45-710 613-45-710
19 O-RING* 050-90-232 050-90-232
20 O-RING* 050-90-231 050-90-231
21 SEAL RECEPTACLE 613-45-730 613-45-730
22 O-RING* NOT REQ'D NOT REQ'D
23 SEAL RETAINER 613-45-530 613-45-530
24 O-RING* 050-90-230 050-90-230
25 VALVE SEAL* 613-45-520 613-45-520
26 CENTRAL BODY 613-45-381 613-45-381
27 VALVE BODY 613-50-350 613-50-350
28 O-RING* 050-90-231 050-90-231
29 RUBBER MANDREL 645-45-220 645-45-220
30 PACKING ELEMENT 602-50-512 (4) 602-50-512 (4)
31 RUBBER SPACER 601-50-840 (4) 650-50-840 (4)
32 PACKING ELEMENT 602-50-511 (2) 602-50-511 (2)
33 BOOSTER SPACER 645-52-860 645-50-860
Weatherford products and services are subject to Weatherford’s standard terms and conditions. For more information concerning the full line of Weatherford products and
services, please contact your authorized Weatherford representative. Unless noted otherwise, trademarks and servicemarks noted herein are the property of Weatherford. 11 of 19
© 2003. Weatherford. All rights reserved.
INDEX NO. 400
UNIT NO. 646
PN. 646-45 thru 72
DATE 10-Oct-2003
PARTS LIST
5" 5"
ITEM
DESCRIPTION 15.0 - 18.0 11.5 - 15.0
NO.
646-52 646-50
34 O-RING* 050-90-232 050-90-232
35 CAP SCREW 002-C6-008 (3) 002-C6-008 (3)
36 SHEAR SCREW** 007-C4-006** 007-C4-006**
37 MANDREL CAP 645-45-130 645-45-130
38 SEAL MANDREL 646-45-225 646-45-225
39 MIDDLE SLEEVE 645-45-865 645-45-865
40 LOCK SCREW* 003-C4-006 (6) 003-C4-006 (6)
41 O-RING* NOT REQ'D NOT REQ'D
42 LOCK SCREW* 003-C4-006 (6) 003-C4-006 (6)
43 SEAL* 646-45-520 (2) 646-45-520 (2)
44 CENTER SUB 645-50-850 645-50-850
45 RUBBER GAGE RING 650-52-830 650-50-830
46 O-RING* 050-90-132 (2) 050-90-132 (2)
47 UPPER SEAL SPACER 646-45-525 646-45-525
48 LOWER SEAL SPACER 646-45-526 646-45-526
49 1.500" SEAT O-RING NOT REQ'D NOT REQ'D
50 1.500" SEAT NOT REQ'D NOT REQ'D
51 LOWER RUBBER RETAINER 602-50-850 602-50-850
52 SEAL MANDREL CAP 646-45-245 646-45-245
53 LOWER CONE 665-50-412 665-50-410
54 LOWER MANDREL 646-45-230 646-45-230
55 CONTROL BODY 665-50-330 665-50-330
56 LOWER SLIP 665-50-110X (4) 665-50-110X (4)
57 LOWER SLIP SCREW 665-50-330 665-50-330
58 SLIP SPRING 450-55-900 (8) 450-55-900 (8)
59 DRAG BLOCK 090-56-900 (4) 090-56-900 (4)
60 DRAG BLOCK SPRING* 091-00-900 (20) 091-00-900 (20)
61 DRAG BLOCK RETAINER NOT REQ'D NOT REQ'D
62 LOCK SCREW* 003-C4-006 (4) 003-C4-006 (4)
63 RETAINING RING NOT REQ'D NOT REQ'D
64 J-BODY*** 665-50-37X 665-50-37X
65 BOTTOM SUB 645-45-630 645-45-630
Common repair parts
**Quantities varies from 1 to 9 depending on shear required.
***J-body options: right hand automatic, X-O; left hand automatic, X-1;
right hand manual, X-2; left hand manual,X-3
Weatherford products and services are subject to Weatherford’s standard terms and conditions. For more information concerning the full line of Weatherford products and
services, please contact your authorized Weatherford representative. Unless noted otherwise, trademarks and servicemarks noted herein are the property of Weatherford. 12 of 19
© 2003. Weatherford. All rights reserved.
INDEX NO. 400
UNIT NO. 646
PN. 646-45 thru 72
DATE 10-Oct-2003
PARTS LIST
5-1/2" 5-1/2"
ITEM
DESCRIPTION 20.0 - 23.0 14.0 - 17.0
NO.
646-57 646-55
1 TOP COUPLING 12BB-02 12BB-02
2 INNER MANDREL 646-55-210 646-55-210
3 HOLD DOWN EXTENSION 613-55-310 613-55-310
4 O-RING* 050-90-334 050-90-334
5 HOLD DOWN CAP 613-53-370 613-55-370
6 O-RING* NOT REQ'D NOT REQ'D
7 O-RING* 050-90-236 050-90-236
8 HOLD DOWN BUTTON 613-53-974 (6) 613-55-972 (6)
9 O-RING* 050-90-224 (6) 050-90-224 (6)
10 HOLD DOWN SCREW* 005-C5-008 (3) 005-C5-008 (3)
11 HOLD DOWN SPRING 613-55-975 (18) 613-55-975 (18)
12 HOLD DOWN STRAP 613-55-360 (3) 613-55-360 (3)
13 STRAP RETAINER 613-53-650 613-55-650
14 O-RING* 050-90-241 050-90-241
15 HOLD DOWN BODY 613-53-321 613-57-321
16 COMPENSATING MANDREL 613-55-240 613-55-240
17 O-RING* 050-90-342 050-90-340
18 COMPENSATING PISTON 613-55-710 613-55-710
19 O-RING* 050-90-339 050-90-339
20 O-RING* 050-90-235 050-90-235
21 SEAL RECEPTACLE 613-55-730 613-55-730
22 O-RING* 050-90-236 050-90-236
23 SEAL RETAINER 613-45-530 613-55-530
24 O-RING* NOT REQ'D NOT REQ'D
25 VALVE SEAL* 613-55-520 613-55-520
26 CENTRAL BODY 613-55-381 613-55-381
27 VALVE BODY 613-53-350 613-55-350
28 O-RING* 050-90-235 050-90-235
29 RUBBER MANDREL 645-55-220 645-55-220
30 PACKING ELEMENT 602-57-512 (4) 602-55-512 (4)
31 RUBBER SPACER 602-57-840 (4) 602-55-840 (4)
32 PACKING ELEMENT 602-57-511 (2) 602-55-511 (2)
33 BOOSTER SPACER 645-57-860 645-55-860
Weatherford products and services are subject to Weatherford’s standard terms and conditions. For more information concerning the full line of Weatherford products and
services, please contact your authorized Weatherford representative. Unless noted otherwise, trademarks and servicemarks noted herein are the property of Weatherford. 13 of 19
© 2003. Weatherford. All rights reserved.
INDEX NO. 400
UNIT NO. 646
PN. 646-45 thru 72
DATE 10-Oct-2003
PARTS LIST
5-1/2" 5-1/2"
ITEM
DESCRIPTION 20.0 - 23.0 14.0 - 17.0
NO.
646-57 646-55
34 O-RING* 050-90-235 050-90-235
35 CAP SCREW 002-C6-008 (2) 002-C8-008 (2)
36 SHEAR SCREW** B10-C4-008** B10-C4-008**
37 MANDREL CAP 645-55-130 645-55-130
38 SEAL MANDREL 646-55-225 646-55-225
39 MIDDLE SLEEVE 645-55-865 645-55-865
40 LOCK SCREW* 003-C4-008 (6) 003-C4-008 (6)
41 O-RING* NOT REQ'D NOT REQ'D
42 LOCK SCREW* 003-C4-006 (6) 003-C4-006 (6)
43 SEAL* 580-45B390 (2) 580-45-B390 (2)
44 CENTER SUB 645-57-850 645-55-850
45 RUBBER GAGE RING NOT REQ'D NOT REQ'D
46 O-RING* 050-90-137 (2) 050-90-137 (2)
47 UPPER SEAL SPACER 646-55-529 646-55-525
48 LOWER SEAL SPACER 646-55-526 646-55-526
49 1.500" SEAT O-RING NOT REQ'D NOT REQ'D
50 1.500" SEAT NOT REQ'D NOT REQ'D
51 LOWER RUBBER RETAINER 645-57-830 602-55-830
52 SEAL MANDREL CAP 646-55-245 646-55-245
53 LOWER CONE 665-55-410 665-55-410
54 LOWER MANDREL 646-55-230 646-55-230
55 CONTROL BODY 665-55-330 665-55-330
56 LOWER SLIP 665-55-112X (4) 665-55-112X (4)
57 LOWER SLIP SCREW 665-55-330 004-03-006
58 SLIP SPRING 350-55-956 (8) 350-55-956 (8)
59 DRAG BLOCK 090-45-900 (4) 090-55-900 (4)
60 DRAG BLOCK SPRING* 091-00-900 (16) 091-00-900 (24)
61 DRAG BLOCK RETAINER 600-57-910 600-55-910
62 LOCK SCREW* 003-C5-008 (3) 003-C5-008 (3)
63 RETAINING RING NOT REQ'D NOT REQ'D
64 J-BODY*** 610-55-37X 610-55-342
65 BOTTOM SUB 645-55-630 645-55-630
Common repair parts
**Quantities varies from 1 to 9 depending on shear required.
***J-body options: right hand automatic, X-O; left hand automatic, X-1;
right hand manual, X-2; left hand manual,X-3
Weatherford products and services are subject to Weatherford’s standard terms and conditions. For more information concerning the full line of Weatherford products and
services, please contact your authorized Weatherford representative. Unless noted otherwise, trademarks and servicemarks noted herein are the property of Weatherford. 14 of 19
© 2003. Weatherford. All rights reserved.
INDEX NO. 400
UNIT NO. 646
PN. 646-45 thru 72
DATE 10-Oct-2003
PARTS LIST
6-5/8" 7"
ITEM
DESCRIPTION 17.0 - 20.0 29.0 - 35.0
NO.
646-68 646-68
1 TOP COUPLING 12BB-01 12BB-01
2 INNER MANDREL 646-70-210 646-70-210
3 HOLD DOWN EXTENSION 613-70-310 613-70-310
4 O-RING* 050-90-339 050-90-339
5 HOLD DOWN CAP 613-68-370 613-68-370
6 O-RING* NOT REQ'D NOT REQ'D
7 O-RING* 050-90-241 050-90-241
8 HOLD DOWN BUTTON 613-70-974 (6) 613-70-974 (6)
9 O-RING* 050-90-230 (6) 050-90-230 (6)
10 HOLD DOWN SCREW* 005-C5-008 (3) 005-C5-008 (3)
11 HOLD DOWN SPRING 613-70-975 (18) 613-70-975 (18)
12 HOLD DOWN STRAP 613-68-360 (3) 613-68-360 (3)
13 STRAP RETAINER 613-68-650 613-68-650
14 O-RING* 050-90-350 050-90-350
15 HOLD DOWN BODY 613-68-320 613-68-320
16 COMPENSATING MANDREL 613-70-240 613-70-240
17 O-RING* 050-90-350 050-90-350
18 COMPENSATING PISTON 613-70-715 613-70-715
19 O-RING* 050-90-344 050-90-344
20 O-RING* 050-90-241 050-90-241
21 SEAL RECEPTACLE 613-70-730 613-70-730
22 O-RING* 050-90-243 050-90-243
23 SEAL RETAINER 613-70-530 613-70-530
24 O-RING* NOT REQ'D NOT REQ'D
25 VALVE SEAL* 613-70-520 613-70-520
26 CENTRAL BODY 613-70-385 613-70-385
27 VALVE BODY 613-68-350 613-68-350
28 O-RING* 050-90-241 050-90-241
29 RUBBER MANDREL 645-70-220 645-70-220
30 PACKING ELEMENT 602-67-512 (4) 602-67-512 (4)
31 RUBBER SPACER 611-67-840 (4) 601-67-840 (4)
32 PACKING ELEMENT 602-67-511 (2) 602-67-511 (2)
33 BOOSTER SPACER 645-68-860 645-68-860
Weatherford products and services are subject to Weatherford’s standard terms and conditions. For more information concerning the full line of Weatherford products and
services, please contact your authorized Weatherford representative. Unless noted otherwise, trademarks and servicemarks noted herein are the property of Weatherford. 15 of 19
© 2003. Weatherford. All rights reserved.
INDEX NO. 400
UNIT NO. 646
PN. 646-45 thru 72
DATE 10-Oct-2003
PARTS LIST
6-5/8" 7"
ITEM
DESCRIPTION 17.0 - 20.0 29.0 - 35.0
NO.
646-68 646-68
34 O-RING* 050-90-243 050-90-243
35 CAP SCREW 002-C8-012 (3) 002-C8-012 (3)
36 SHEAR SCREW** B10-C4-008** B10-C4-008**
37 MANDREL CAP 645-70-130 645-70-130
38 SEAL MANDREL 646-70-225 646-70-225
39 MIDDLE SLEEVE 645-70-865 645-70-865
40 LOCK SCREW* 003-C5-008 (6) 003-C5-008 (6)
41 O-RING* 050-90-239 050-90-239
42 LOCK SCREW* 003-C5-008 (6) 003-C5-008 (6)
43 SEAL* 581-55-B510 (3) 581-55B510 (3)
44 CENTER SUB 645-70-850 645-70-850
45 RUBBER GAGE RING 611-67-841 (3) 611-67-841 (3)
46 O-RING* 050-90-147 (3) 050-90-147 (3)
47 UPPER SEAL SPACER 646-70-525 646-70-525
48 LOWER SEAL SPACER 646-70-526 646-70-526
49 1.500" SEAT O-RING 050-90-229 505-90-229
50 1.500" SEAT O-RING 646-70-240 646-70-240
51 LOWER RUBBER RETAINER 602-70-885 602-70-885
52 SEAL MANDREL CAP NOT REQ'D NOT REQ'D
53 LOWER CONE 665-70-410 665-70-410
54 LOWER MANDREL 646-70-230 646-70-230
55 CONTROL BODY 602-70-330 602-70-330
56 LOWER SLIP 680-70-110 (4) 680-70-110 (4)
57 LOWER SLIP SCREW 004-03-006 (4) 004-03-006 (4)
58 SLIP SPRING 350-70-956 (4) 350-70-956 (4)
59 DRAG BLOCK 090-60-900 (4) 090-60-900 (4)
60 DRAG BLOCK SPRING* 091-01-900 (24) 091-01-900 (24)
61 DRAG BLOCK RETAINER 600-67-910 600-67-910
62 LOCK SCREW* 003-C5-012 (3) 003-C5-012 (3)
63 RETAINING RING 600-70-911 600-70-911
64 J-BODY*** 610-70-37X 610-70-37X
65 BOTTOM SUB 645-70-630 645-70-630
*Common repair parts.
**Quantities varies from 1 to 9 depending on shear required.
***J-body options: right hand automatic, X-O; left hand automatic, X-1; right hand manual, X-2; left hand
manual,X-3.
Weatherford products and services are subject to Weatherford’s standard terms and conditions. For more information concerning the full line of Weatherford products and
services, please contact your authorized Weatherford representative. Unless noted otherwise, trademarks and servicemarks noted herein are the property of Weatherford. 16 of 19
© 2003. Weatherford. All rights reserved.
INDEX NO. 400
UNIT NO. 646
PN. 646-45 thru 72
DATE 10-Oct-2003
PARTS LIST
7" 7"
ITEM
DESCRIPTION 26.0 - 32.0 17.0 - 26.0
NO.
646-70 646-72
1 TOP COUPLING 12BB-01 12BB-01
2 INNER MANDREL 646-70-210 646-70-210
3 HOLD DOWN EXTENSION 613-70-310 613-70-310
4 O-RING* 050-90-339 050-90-339
5 HOLD DOWN CAP 613-68-370 613-70-370
6 O-RING* NOT REQ'D NOT REQ'D
7 O-RING* 050-90-241 050-90-241
8 HOLD DOWN BUTTON 613-70-974 (6) 613-72-974 (6)
9 O-RING* 050-90-230 (6) 050-90-230 (6)
10 HOLD DOWN SCREW* 005-C5-008 (3) 005-C5-008 (3)
11 HOLD DOWN SPRING 613-70-975 (18) 613-70-975 (18)
12 HOLD DOWN STRAP 613-68-360 (3) 613-70-360 (3)
13 STRAP RETAINER 613-68-650 613-72-650
14 O-RING* 050-90-350 050-90-350
15 HOLD DOWN BODY 613-68-320 613-70-320
16 COMPENSATING MANDREL 613-70-240 613-70-240
17 O-RING* 050-90-350 050-90-350
18 COMPENSATING PISTON 613-70-715 613-70-715
19 O-RING* 050-90-344 050-90-344
20 O-RING* 050-90-241 050-90-241
21 SEAL RECEPTACLE 613-70-730 613-70-730
22 O-RING* 050-90-243 050-90-243
23 SEAL RETAINER 613-70-530 613-70-530
24 O-RING* NOT REQ'D NOT REQ'D
25 VALVE SEAL* 613-70-520 613-70-520
26 CENTRAL BODY 613-70-385 613-70-385
27 VALVE BODY 613-68-350 613-70-350
28 O-RING* 050-90-241 050-90-241
29 RUBBER MANDREL 645-70-220 645-70-220
30 PACKING ELEMENT 602-70-512 (4) 602-72-512 (4)
31 RUBBER SPACER 650-70-840 (4) 611-72-840 (4)
32 PACKING ELEMENT 602-70-511 (2) 602-72-511 (2)
33 BOOSTER SPACER 645-70-860 645-72-860
Weatherford products and services are subject to Weatherford’s standard terms and conditions. For more information concerning the full line of Weatherford products and
services, please contact your authorized Weatherford representative. Unless noted otherwise, trademarks and servicemarks noted herein are the property of Weatherford. 17 of 19
© 2003. Weatherford. All rights reserved.
INDEX NO. 400
UNIT NO. 646
PN. 646-45 thru 72
DATE 10-Oct-2003
PARTS LIST
7" 7"
ITEM NO. DESCRIPTION 26.0 - 32.0 17.0 - 26.0
646-70 646-72
34 O-RING* 050-90-243 050-90-243
35 CAP SCREW 002-C8-012 (3) 002-C8-012 (3)
36 SHEAR SCREW** B10-C4-008** B10-C4-008**
37 MANDREL CAP 645-70-130 645-70-130
38 SEAL MANDREL 646-70-225 646-70-225
39 MIDDLE SLEEVE 645-70-865 645-70-865
40 LOCK SCREW* 003-C5-008 (6) 003-C5-008 (6)
41 O-RING* 050-90-239 050-90-239
42 LOCK SCREW* 003-C5-008 (6) 003-C5-008 (6)
43 SEAL* 581-55-B510 (3) 581-55-B510 (3)
44 CENTER SUB 645-70-850 645-70-850
45 RUBBER GAGE RING 611-70-856 (3) 611-72-830 (3)
46 O-RING* 050-90-147 (3) 050-90-147 (3)
47 UPPER SEAL SPACER 646-70-525 646-70-525
48 LOWER SEAL SPACER 646-70-526 646-70-526
49 1.500" SEAT O-RING 050-90-229 050-90-229
50 1.500" SEAT O-RING 646-70-240 646-70-240
51 LOWER RUBBER RETAINER 602-70-885 665-70-885
52 SEAL MANDREL CAP NOT REQ'D NOT REQ'D
53 LOWER CONE 665-70-410 665-70-410
54 LOWER MANDREL 646-70-230 646-70-230
55 CONTROL BODY 602-70-330 665-70-330
56 LOWER SLIP 680-70-110 (4) 680-70-115 (4)
57 LOWER SLIP SCREW 004-03-006 (4) 004-03-006 (4)
58 SLIP SPRING 350-70-956 (4) 350-70-956 (8)
59 DRAG BLOCK 090-70-900 (4) 090-80-900 (4)
60 DRAG BLOCK SPRING* 091-01-900 (24) 091-01-900 (24)
61 DRAG BLOCK RETAINER 600-70-910 600-72-910
62 LOCK SCREW* 003-C5-012 (3) 003-C5-010 (3)
63 RETAINING RING 600-70-911 600-70-911
64 J-BODY*** 610-70-37X 610-70-37X
65 BOTTOM SUB 645-70-630 645-70-630
*Common repair parts.
**Quantities varies from 1 to 9 depending on shear required.
***J-body options: right hand automatic, X-O; left hand automatic, X-1;
right hand manual, X-2; left hand manual,X-3.
Weatherford products and services are subject to Weatherford’s standard terms and conditions. For more information concerning the full line of Weatherford products and
services, please contact your authorized Weatherford representative. Unless noted otherwise, trademarks and servicemarks noted herein are the property of Weatherford. 18 of 19
© 2003. Weatherford. All rights reserved.
INDEX NO. 400
UNIT NO. 646
PN. 646-45 thru 72
DATE 10-Oct-2003
MIDDLE SLEEVE
MIDDLE
SLEEVE BOX CROSSOVER
BOX
CROSSOVER
SEAL MANDREL SPACER 42
SPACING CROSSOVER
SEAL
MANDREL
SPACER
SPACING
CROSSOVER
PIN CROSSOVER
38
49
PIN
CROSSOVER
50
Weatherford products and services are subject to Weatherford’s standard terms and conditions. For more information concerning the full line of Weatherford products and
services, please contact your authorized Weatherford representative. Unless noted otherwise, trademarks and servicemarks noted herein are the property of Weatherford. 19 of 19
© 2003. Weatherford. All rights reserved.