Description: Found in ferrous and nonferrous
castings
Location in Part: Internal or near surface.
Characteristics/Appearance: Appear as a
ragged line of variable width and numerous
branches. May occur individually or in groups.
Metallurgical Analysis: Hot tears or cracks are
| caused by nonuniform cooling resulting in
stresses that rupture the surface of the metal
while its temperature is still in the brittle range.
Tears may originate where stresses are set up
by the more rapid cooling of thin sections that
adjoin heavier masses of metal, which are
slower to cool,
Hot tears are cracks that form before complete
solidification of the metal section of a casting.
(HB-RT)
AHHH 0
Using RT to
Appearance: Dark, jagged, linear indication,
i or branching.
1. The sensitivity level may not be suffi
detect surface hot tears.
Close-up view of hot tears.
Hot tears in
the fillet of a
casting.