Professional Documents
Culture Documents
• Table below shows maximum number of Connected users 2x2 MIMO per cell for FDD
FSMF, 2x2 DL MIMO, IRC for 2RX
(up to) 3 cells (up to) 6 cells
20MHz 15MHz 10MHz 5MHz 3MHz 1.4MHz 20MHz 15MHz 10MHz 5MHz 3MHz 1.4MHz
per cell 840 720 600 480 120 40 - - 420 420 - -
FSMF + FBBA/C, 2x2 DL MIMO, IRC for 2RX
(up to) 3 cells (up to) 6 cells (up to) 12 cells
20MHz 15MHz 10MHz 5MHz 20MHz 15MHz 10MHz 5MHz 20MHz 15MHz 10MHz 5MHz
per cell 1500 1250 1000 840 840 720 600 480 - - 420 420
FSMF + 2FBBC (or +1FBBA +1FBBC), 2x2 DL MIMO, IRC for 2RX
(up to) 3 cells (up to) 6 cells (up to) 9 cells (up to) 18 cells
20MHz 15MHz 10MHz 5MHz 20MHz 15MHz 10MHz 5MHz 20MHz 15MHz 10MHz 5MHz 20MHz 15MHz 10MHz 5MHz
per cell *) *) *) *) *) *) *) *) 840 720 600 480 - - 420 420
• LTE16 FDD brings new capacity figures to max number of connected users for FSMF 20MHz and 15MHz
FSMF, 4x2 DL MIMO, IRC for 4RX
(up to) 3 cells (up to) 6 cells
20MHz 15MHz 10MHz 5MHz 3MHz 1.4MHz 20MHz 15MHz 10MHz 5MHz 3MHz 1.4MHz
per cell 840 **) 720 **) 600 480 - - - - - - - -
FSMF + FBBA/C, 4x2 DL MIMO, IRC for 4RX
(up to) 3 cells (up to) 6 cells (up to) 12 cells
20MHz 15MHz 10MHz 5MHz 20MHz 15MHz 10MHz 5MHz 20MHz 15MHz 10MHz 5MHz
per cell 1500 1250 1000 840 - - 600 480 - - - -
FSMF + 2FBBC (or +1FBBA +1FBBC), 4x2 DL MIMO, IRC for 4RX
(up to) 3 cells (up to) 6 cells (up to) 9 cells (up to) 18 cells
20MHz 15MHz 10MHz 5MHz 20MHz 15MHz 10MHz 5MHz 20MHz 15MHz 10MHz 5MHz 20MHz 15MHz 10MHz 5MHz
per cell *) *) *) *) - - *) *) - - 600 480 - - - -
FSMF + 2FBBC (or +1 FBBA +1FBBC), 2x2 DL MIMO, IRC for 2RX
20MHz 15MHz 10MHz 5MHz
Number of supported cells 1-9 1-9 1-18 1-18
FSMF + 2FBBC (or +1 FBBA +1FBBC), 4x2 DL MIMO, IRC for 4RX
20MHz 15MHz 10MHz 5MHz
Number of supported cells *) *) 1-9 1-9
Cells in Carrier
Cell 1 is SCell of Cell 2
aggregation
FSMF: CA 10 + 10 Max 100 CA PCell UEs Cell 2 is SCell of Cell 1 Carrier Aggregation
configured users is the
Max 100 CA PCell UEs same as in LTE15A
Max 100 CA
Cell 2 SCell UEs
Max 420 Active
UEs
• At maximum 100 * 6 = 600 users could be configured with the Secondary Cell (assuming that
maxNumCaConfUeDc = 100 in all cells in this eNB)
• Total number of RRC Connected Users per eNB is then equal to: 6 * (420 – 100) = 1920
• If there are no UEs with Secondary Cell configured in the eNB, total number of Connected Users
per eNB is 6 * 420 = 2520
Connected user = RRC connected with at least one Data Radio Bearer (DRB) established
8 © Nokia Solutions and Networks 2014
For internal use
FDD-LTE 16
Flexi Zone Micro (FZM)
Cells in Carrier
Intra-eNB FZM Indoor Dual Primary Cell
aggregation
Band: CA 10 + 20 Max 100 CA PCell UEs
• At maximum 100 users from Primary Cell could be configured with the Secondary Cell
• Total number of RRC Connected Users per eNB is then equal to: 300
Connected user = RRC connected with at least one Data Radio Bearer (DRB) established
11 © Nokia Solutions and Networks 2014
For internal use
FDD-LTE 16 FZM Maximum number of 2-CC Connected users
Cells in Carrier
Cell 1 of eNB 1 is SCell Carrier Aggregation
aggregation
of eNB 2
20 + 20 Max 100 CA PCell UEs
configured users in
Cell 1 of eNB2 is SCell
of eNB 1 continous band
Max 100 CA PCell UEs configuration
Cell 1 Max 50 CA
eNB 2 Max 400 Active
SCell UEs
UEs
• At maximum 50 * 2 = 100 users could be configured with the Secondary Cells (assuming that in
scenario with two eNBs 50 users is configured in Secondary Cells in Inter-eNB)
• Total number of RRC Connected Users per each eNB is then equal to: 400 – 50 = 350
• If there are no UEs with Secondary Cell configured in the Inter-eNB scenario, total number of
Connected Users per each one of the two eNBs is 400
Connected user = RRC connected with at least one Data Radio Bearer (DRB) established
12 © Nokia Solutions and Networks 2014
For internal use
TDD-LTE 16
Macro BTS
• Table below shows maximum number of Connected users per cell for 10 MHz, 15 MHz and 20 MHz cell bandwidth for TDD DL/UL frame
configuration 1 (2:2) and 2 (3:1) in TD-LTE 16.
Connected user = RRC connected with at least one Data Radio Bearer (DRB) established
• Maximum number of Connected users per cell with limited feature set
Connected user = RRC connected with at least one Data Radio Bearer (DRB) established
• Table below shows actual available combinations supported with TD-LTE 16 for different HW and cell configuration variants dependently on
the MIMO/Beamforming schemes
• Maximum number of RRC_Connected users in eNB in Carrier Aggregation enabled deployment is floating and depends
on the number of UEs with configured Secondary Cell:
Cells in Carrier
TDD frame conf 1 configured users is the
aggregation
Max 100 CA PCell UEs same as in LTE15A
Cell 2 Max 100 CA
SCell UEs
Max 600 RRC
Connected UEs
• At maximum 100 * 6 = 600 users could be configured with the Secondary Cells (assuming that maxNumCaConfUeDc
= 100 in all cells in this eNB)
• Total number of RRC_Connected Users per eNB is then equal to: 6 * (600 - 100) = 3000
• If there are no UEs with Secondary Cell configured in the eNB, total number of Connected Users per eNB is 6 * 600 =
3600
Connected user = RRC connected with at least one Data Radio Bearer (DRB) established
Connected user = RRC connected with at least one Data Radio Bearer (DRB) established.
• Maximum number of RRC_Connected users in eNB in Carrier Aggregation enabled deployment is floating and depends
on the number of UEs with configured Secondary Cell:
Cells in Carrier
configured users is the
aggregation
TDD frame conf 1
Max 100 CA PCell UEs same as in LTE15A
Cell 2 Max 100 CA
Max 200 RRC SCell UEs
Connected UEs
• At maximum 100 * 2 = 200 users could be configured with the Secondary Cells (assuming that maxNumCaConfUeDc
= 100 in all cells in this eNB)
• Total number of RRC_Connected Users per eNB is then equal to: 2* (200 - 100) = 200
• If there are no UEs with Secondary Cell configured in the eNB, total number of Connected Users per eNB is 2 * 200 =
400
Connected user = RRC connected with at least one Data Radio Bearer (DRB) established