Professional Documents
Culture Documents
CM/L - 2385763
LITTLE LITTLE
MASTER-I MASTER-1C
LITTLE
MASTER-II
Sprinkler
SUPERFLOW-II
Aqua
CHAMPION
LITTLE LITTLE
GIANT-I GIANT-II Bungalows
APPLICATIONS
Residential Bungalows
MDH-36A MDH-36H MDH-37H
Community Water Supply
Construction Site
Appartment
Small Farms
Lawns & Gardens
S10 Car Washing
Sprinklers
Pumping Solution Hotel & Hospitals
www.lubipumps.com
Self-Priming Monoblock Pumps
"LUBI" brand Self Priming Monoblock Pumps, 2880 RPM are manufactured under strict quality control measure, adopted for efficient and reliable
for operation.
GENERAL FEATURES
Pump casings, Adaptor, Stator body, Endshield is made of close grained Cast Iron of
high tensile strength and has a very smooth surface finish resulting in low friction losses.
High tensile brass impeller is used to give trouble free service.
Self Priming capacity of pumps upto 6 meters.
The laminations are non-oriented silicon steel & confirms to IS-648.
Motor windings are vacuum impregnated with synthetic varnish for better moisture resistance.
Superior mechanical shaft seal for longer life and effective sealing against water leakage.
The pressure die cast rotor runs on two genuine sealed ball bearings.
Grease lubricated anti-friction ball bearings are fitted at both ends to withstand radial and axial loads.
Better insulating materials are used so that pumpset can withstand high temperature rise.
STANDARD MOTOR
The motor is totally enclosed and fan cooled (TEFC)
Motor with specification of IS : 996 & IEC : 34-1
Class 'B' insulation is used.
The stainless steel shaft is ground finished.
The motors are of the capacitor Start & Run (CS & R) design giving high starting torque.
2-pole induction motor.
Input supply condition is single phase, 230V, 50 Hz
Voltage Range 180V-240V
Approximate performance chart at 230 V, 50 Hz. AC supply, 1-Phase, 2 pole (3000 RPM Syn. Speed)
Size in Head in Metres
Model K.W. H.P.
mm 3 6 9 12 15 18 21 24 27 30 33 36 39 42 45 48 51 54
MDH-50N 0.37 0.50 25 x 25 2100 1850 1700 1350 1200 900 600 350 - - - - - - - - - -
Discharge in L.P.H.
MDH-50A / 50A (C.I) 0.37 0.50 25 x 25 2200 1950 1800 1600 1350 1050 700 550 240 - - - - - - - - -
MI-50 SP 0.37 0.50 25 x 25 - 2400 2250 2100 1900 1600 1250 950 750 - - - - - - - - -
MDH-27A / 27A (C.I) 0.37 0.50 25 x 25 - 2550 2300 2100 2000 1600 1450 1250 1000 650 - - - - - - - -
MDH-27DC 0.37 0.50 25 x 25 - 2550 2300 2100 2000 1600 1450 1250 1000 650 - - - - - - - -
MDH-27ASF 0.80 1.10 25 x 25 - 3200 3050 2700 2250 1850 1650 1450 1250 850 600 - - - - - - -
MDH-32A 0.37 0.50 25 x 25 - 2500 2300 2100 1950 1700 1550 1450 1200 950 - - - - - - - -
MDH-36A 0.75 1.00 25 x 25 - 3600 3400 3250 3100 2850 2700 2550 2400 2250 2050 1900 1700 1450 - - - -
MDH-36H 0.75 1.00 25 x 25 - 3800 3700 3650 3450 3350 3100 2900 2700 2450 2300 2100 1850 1650 1350 - - -
MDH-37H 1.10 1.5 25 x 25 - - - 4500 4260 4080 3840 3720 3480 3240 3000 2820 2580 2280 2100 1800 1560 1320
Product Improvement is a continuous process at ‘LUBI’. The data given in this publication is therefore subject to revision.