Professional Documents
Culture Documents
Total $863.81
FLOW CHART PROCESS MATERIAL MISCELLANEOUS TOOLS/MATERIALS
Start Start - -
Smooth the edges 4) Smooth the edges (outside portion) of the PVC - PVC Schedule 40 pipe,
- Diburring Tool/cutter/ sander
of the PVC Pipe Schedule 17"
Inspect
5) Inspect the product if the PVC Schedule fits - 3" PVC Coupling socket
the
product smoothly with the PVC Coupling - 3" PVC Schedule 40 -
Pipe, 17" long
A
FLOW CHART PROCESS MATERIAL MISCELLANEOUS TOOLS/MATERIALS
6) Put glue on the PVC Coupling socket and the PVC - 3" PVC Coupling socket
Put glue on the PVC the Schedule. Put a large amount of glue on the outside of the into the
schedule and the PVC Male end around 2" (PVC Schedule) and less on the inside of
- Super Glue
- 3" PVC Schedule 40 Pipe,
coupling socket
the female end (PVC Coupling Socket). 17" long
11) Place the PVC Round Snap-in Floor Drain (with - Fine Stainless Steel Mesh(80
Place the PVC Round Snap-in
mesh to 120 mesh
Floor Drain inside the PVC mesh from step 1) inside the PVC Coupling socket - 3” diameter) into the 3” PVC
-
Coupling socket
until it bottoms out. Round Snap-in Floor
B
FLOW CHART PROCESS MATERIAL MISCELLANEOUS TOOLS/MATERIALS
12) Put glue on the Reducer Busing, and the PVC Coupling - 3"x3/4" PVC
Put glue on the PVC socket (with the PVC round Snap in Floor - mesh inside). Put a
Reducer Busing and the PVC ReducerBusing, Flush Style-
large amount of glue on the outside portion of the Male end - Super Glue
coupling socket
(Reducer Bushing) and less on the inside of the female end
Spig. X FIPT
(PVC Coupling Socket). - 3" PVC Coupling socket
- 3"x3/4" PVC
Place the PVC Reducer 13) Place the PVC Reducer Bushing on top of the
Bushing on top of the PVC ReducerBusing, Flush Style-
PVC Coupling Socket. Put a little bit of pressure to -
Coupling Socket Spig. X FIPT
connect the parts. - 3" PVC Coupling socket
- 3"x3/4" PVC
Clean and wipe ReducerBusing, Flush Style-
excess glue 14) Wipe any excess glue on the PVC Tissue/Towel
Spig. X FIPT
- 3" PVC Coupling socket
- 3"x3/4" PVC
Inspect 15) Inspect the product if PVCs are securely
ReducerBusing, Flush Style-
the connected and if there are any excess glue inside -
Spig. X FIPT
product the PVC - 3" PVC Coupling socket
- 3"x3/4" PVC
ReducerBusing, Flush Style-
Dry 16) Let it dry overnight -
Spig. X FIPT
- 3" PVC Coupling socket
- 3"x3/4" PVC
ReducerBusing, Flush Style-
Wash the PVC Pipe 17) Wash the inside portion of the PVC Tissue/Towel
Spig. X FIPT
- 3" PVC Coupling socket
C
FLOW CHART PROCESS MATERIAL MISCELLANEOUS TOOLS/MATERIALS
- 3"x3/4" PVC
Dry ReducerBusing, Flush Style-
18) Let it dry for a few minutes -
Spig. X FIPT
- 3" PVC Coupling socket
Smooth the edges 19) Smooth the edges (outside portion) of the other
- PVC Schedule 40 pipe, 17" - Diburring Tool/cutter/ sander
of the PVC Pipe end of the PVC Schedule
20) Glue the PVC Male adaptor Socket into the other open - 3" PVC Male adaptor
Put glue on the PVC Male side of the PVC Schedule . Put a large amount of glue on the
adaptor and the PVC MIPT X Socket
outside portion of the Male end around 2" (PVC Schedule) and - Super Glue
schedule.
less on the inside of the female end (PVC Male adaptor
- 3" PVC Schedule 40 Pipe,
socket). 17" long.
D
FLOW CHART PROCESS MATERIAL MISCELLANEOUS TOOLS/MATERIALS
25) Glue the PVC Reducer Bushing into the other open side of the - 3"x3/4" Reducer Bushing,
Put glue on the PVC Reducer PVC Female adaptor socket . Put a large amount of glue on the
Flush Style-Spig. X FIPT
Bushing and the PVC female outside portion of the Male end around 2" (PVC Reducer Bushing)
- 3" PVC Female adaptor
- Super Glue
adaptor socket. and less on the inside of the female end (PVC female adaptor
socket). Socket X FIPT.
26) Place the PVC Reducer Bushing on top of the - 3"x3/4" Reducer Bushing,
Place the PVC Reducer Flush Style-Spig. X FIPT
Bushing on top of the PVC PVC female adaptor socket. Put a little bit of - 3" PVC Female adaptor
-
female adaptor socket
pressure to connect the parts. Socket X FIPT.
28) Inspect the product if PVCs are securely - 3"x3/4" Reducer Bushing,
Inspect Flush Style-Spig. X FIPT
the connected and if there are any excess glue inside - 3" PVC Female adaptor
-
product the PVC Socket X FIPT.
E
FLOW CHART PROCESS MATERIAL MISCELLANEOUS TOOLS/MATERIALS
Vibrate the Zeolite 31)Ensure to vibrate the bottom side and a little on - Zeolite
- air hammer with 50 PSI
the top of the PVC assembly - PVC Assembly
F
FLOW CHART PROCESS MATERIAL MISCELLANEOUS TOOLS/MATERIALS
G
FLOW CHART PROCESS MATERIAL MISCELLANEOUS TOOLS/MATERIALS
- Canister
Screw the canister 42) Seal the top portion of the Canister - 3/8 MNPT to 3/8" push -
to Connect tube
End End - -