Professional Documents
Culture Documents
Copier Color
Issued by Canon Europa N.V.
HARDWARE
Location:
Reader Assembly
Subject:
Fluctuated vertical line (in the sub scanning direction) on the image read by the Reader
Detail:
<Symptom>
Fluctuated vertical line (in the sub scanning direction) may occur on the image read by the Reader (Figure P-1).
<Cause>
The tension of the belt of the Reader Optical Motor is low.
(1/3)
iRAC9000-007
<Factory Measures>
The tension of the belt of the Optical Motor is doubled (the pressure of the Spring: FU7-2592 is increased).
Servicing Work:
If the above symptom occurs, replace the Spring (FU7-2592) with the new type by referring to 'How to Replace the
Spring' below.
Service Parts:
Interchange-
No. Parts Number Description Q'ty Fig No.
ability
(2/3)
iRAC9000-007
Affected Machines:
(3/3)
iR ADV C5051Series How to Replace the Spring
St 4:
Step 4 Remove
R the
th 2 screws [7] andd ddetach
t h th
the
Step 1: Remove the 2 screws [1] and detach the rear cover [8].
reader right cover [2].
[8]
[2]
[1] [7]
Step 2: Remove the 2 screws [3] and the detach the Step 5: Remove the 2 screws [7].
reader left cover [4].
[[4]]
[9]
[3]
Step 3: Remove the 2 screws [5] and detach the Step 6: Remove the 2 screws [10] and detach the
lower rear cover [11].
[6]
[5]
[11] [10]
Step 7: Remove the 6 screws and detach the Step 9: Replace the spring (FU7-2592)[15]
reinforcement plate [12]. (2pcs.).
[15]
[12]
[16]
[14]
10.外した部品を逆手順で元に戻す
[A]
[13]
* DDI cable [13] freed from the clamp [14] and Step 11: Return the removed parts in the
displaced
displaced. reverse order to complete the operation
operation.
iR ADV C9075Series How to Replace the Spring
Step 1: Remove the 2 screws [1] and detach the Step 4: Remove the 2 screws [7] and detach the
reader right cover [2]. rear cover [8].
[8]
[2]
[1]
[7]
Step 2: Remove the 3 screws [3] and the detach the Step 5: Remove the 2 screws [9].
reader left cover [4].
[[4]]
[9]
[3]
Step 3: Remove the 2 screws [5] and detach the Step 6: Remove the 4 screws [10] and detach the
lower rear cover [11].
[6]
[5]
[11]
[10]
Step 7: Remove the 6 screws and detach the
Step 9: Replace the spring (FU7-2592)[15]
reinforcement plate [12].
(2pcs.).
[15]
[12]
10.外した部品を逆手順で元に戻す
[A]
[13]