Professional Documents
Culture Documents
$ 32,000.00
$ -
$ 91,795.49
$ 34,000.00
$ 725.00
$ 34,725.00
$ 57,070.49
Proposal A
MN Description LENGHT QTY UNIT PRICE
10123881 Pipe, HDPE, PN10, OD 355, 12M Lenght 257 M 23 $ 1,700.00
10123896 Pipe, SS 316L , 5S, DN 350 6M 1 $ 11,656.11
10116543 Bend, 90°, HDPE, PN10 OD355 1 $ 877.83
Tee, SS316L, 5S, DN350, Curve shape 0 $ 1,500.00
10129002 Tee, HDPE, PN16, OD355 0 $ 725.00
10119373 Backing ring, SS, SABS 1123, NB355 3 $ 761.84
10126928 Stub, HDPE, PN10, NB355 3 $ 164.22
10119398 Flange, DN350, SS316, PN10, SABS1123 3 $ 174.96
Bolts M20* 300 16 96
Nut M20 SS 96
Washer M20 SS 96
Manual Valve, KG, DN350, SS 316L, PN10 0 $ 16,000.00
10117152 VALVE,BFLY,14IN,350MM,316SS,BF09J 1 $ -
Stud M20* 150 32
Total
$ -
$ -
$ 54,937.00
$ 34,000.00
$ 725.00
$ 34,725.00
$ 20,212.00
1
2
3
4
1
2
3
4
5
6
Proposal A scope of work
Preparation work Refer to Apendix 1
Prepare and install next to the Multipurpose line connection with HG PLS Line the HDPE Tee Piece as per Iso Drawing
Prepare and Install the 3 90° Bend next Multipurpose line connection with HL PLS Line, with Isolation valve at the End BF and w
Tee Piece to the Bend
Fabricate pipe support and shims as per drawing ( will be provided)
Prepare SS Tee Piece as per drawing
Remove the 90° DN350 SS Bend at the feed line of E1 Mixer tank HG
Lift the HDPE Pipe and put some shims on the pipe support to give more room to install the new Tee Piece
Install the new tee piece and connect it to the Reducer
Install the KF valve located to isolate the old PLS Feed Pipe
Install another KF to Isolate the Line B
Install Pipe Stand
Remove pipe connecting Multipurpose line to the discharge line of HG PLS Pump next to the Isolation valve
Install the Tee Piece that is already connnect to the Bends
Prior Commission work after the shutdown
W Center Duration
MFAB Lifting equipment required 12.5 T Min
MFAB 100458703
MFAB
MFAB 100458704