Professional Documents
Culture Documents
P07
Indikasi awal bahwa printer MP287 minta di reset adalah ketika printer di ON maka di layar
printer terdapar tilisan P kemudia 0 kemudian 7, bergantian terus. Maka ini adalah pertanda
printer minta untuk di reset, ini karena printer sudah mencetak banyak.
Langkah awal untuk mereset printer adalah printer harus dalan keadaan service mode, baru bisa
melakukan proses reset MP287, apabila printer tidak masuk service mode maka printer tidak
akan bisa di reset. Untuk yang belum punya resetter Canon MP287 bisa download disini…
at this time we'll try sharing again about how to Reset Canon MP287 Error E08. The case is
almost the same as the previous generation Canon, i.e. ask reset due to her full split on already
eeprom bios canon.
Early Indications:
When turned on, it will be MP287 instantly appears on the LCD panel error E08 MP287. And if
we do, then the command print at monitor will perform "The Ink Absorber is Almost Full". Image
captions MP287 error E08 on the monitor screen as follows:
1. turn on the Printer, then the Canon MP287 LCD panel error E08 MP287 will appear, and
there is description of "The Ink Absorber is Almost Full" at your monitor.
2. Download the Resetter MP287 here.
3. Canon MP287 Printer has to be in a State of SERVICE MODE.
4. turn off Canon MP287 error E08 that by pressing the power button. Do not unplug the
power cable
5. press and hold the STOP/RESET followed by pressing the POWER button. So both
buttons depressed position.
6. off the button STOP/RESET but don't loose POWER button.
7. in the circumstances the POWER button still depressed, press the STOP/RESET button
as much as 6 times.
8. then release both buttons at the same time. Then Canon MP287 will be in Service Mode.
9. LCD Panel will be blank/dark and on your computer will detect new hardware. Disregard
it.
10. next steps and run the Service Tool.
11. Select the Main menu In the absorber & Platen and then click SET next to his right
12. Canon MP287 Printer error E08 who will be back to normal.
Good Luck.
Cara me-Reset Printer Canon PIXMA MP287 ini sebenarnya bukan hal baru lagi, namun
ternyata masih banyak yang membutuhkannya. .oke saya langsung saja kasih link download
resetter Canon PIXMA MP287 ini kepada anda semua. Langsung saja download melalui link
berikut :
1. Matikan Printer Canon PIXMA MP287 dan biarkan kabel power (cook listrik printer) tetap
terpasang di sumber arus listrik.
2. Tekan dan Tahan tombol Stop/Reset (jangan dilepas)
3. Kemudian tekan tombol Power sampai lampu hijau menyala (saat menekan tombol
power, tombol Stop/Reset jangan dilepas dulu)
4. Lepas tombol Stop/Reset, tetapi jangan lepas tombol power
5. Dalam keadaan tombol Power masih tertekan, tekan tombol Stop/Reset sebanyak 6 kali
6. Kemudian lepas kedua tombol bersamaan, maka Canon MP287 akan berada dalam
kondisi service mode
7. LCD Panel MP287 akan blank/gelap dan Komputer akan mencari device baru. “abaikan
saja”