The document provides steps to reset a Canon iP2770 printer. The printer must be put into service mode by pressing and holding the STOP/RESET button while powering on. Then a software tool must be downloaded, run, and used to clear the printer's memory and settings. Finally, the printer is turned off and back on, resetting it for use.
The document provides steps to reset a Canon iP2770 printer. The printer must be put into service mode by pressing and holding the STOP/RESET button while powering on. Then a software tool must be downloaded, run, and used to clear the printer's memory and settings. Finally, the printer is turned off and back on, resetting it for use.
The document provides steps to reset a Canon iP2770 printer. The printer must be put into service mode by pressing and holding the STOP/RESET button while powering on. Then a software tool must be downloaded, run, and used to clear the printer's memory and settings. Finally, the printer is turned off and back on, resetting it for use.
1. The printer must be in SERVICE MODE, the way 2. Canon iP2770 printer is turned off and plugged the power cord. 3. Press the STOP / RESET and hold, then press and hold the POWER button. 4. The power button is pressed, release the button STOP / RESET, then press the STOP / RESET two times, then release both buttons simultaneously. 5. iP2770 printer will process (rather long) 6. The computer will detect NEW DEVICE, Ignore it ..... 7. This situation indicates the printer is on and ready to reset SERVICE MODE. 8. Download ServiceTool_V1074 for iP2770 9. Extract file ServiceTool_V1074 10. Prepare 2 paper in the printer (this is to print at the time the reset process) 11. Run the program ServiceTool_V1074
12. Click the "MAIN", then the printer will proceed, then iP2770 will print one page with the words "D = 000.0"
13. Click " EEPROM Clear ".
14. Then click "EEPROM", and the printer will print the results iP2770 Resetter. "TPAGE(TTL=00000 COPY=00000)"
15. Turn off the printer by pressing the POWER button.
16. Turn on the printer, and the printer ready to use