Professional Documents
Culture Documents
Windows Start menu - Control Panel - Devices and Printer - Epson stylus photo R2400 [Click Mouse right
button over icon] - You will see the window as below.
FUNCTIONS
1. FRONT SPEED SET SPEED : (--%)
To set a printing plate moving forward speed. To change speed, press Button 7(UP) & Button 8(DOWN).
2. REAR SPEED SET SPEED : (--% )
To set a printing plate moving backwards speed. To change speed, press Button 7(UP) & Button 8(DOWN).
3. SET Temperature : (35%)
To set Halogen temperature.(0 means 35%). To change temperature, press Button 7(UP) & Button 8(DOWN).
4. PaperSize Speed : (20%)
To set a printing plate moving forward speed after finishing printing.
5. Temperature MODE : (ON/OFF)
To turn Halogen lamp ON/OFF. To turn ON/OFF, press Button 7(UP) & Button 8(DOWN).
6. PaperSize Delay : (0.0Sec)
To set delay time for a printing plate to move forward after finishing printing.
7. Automatic rise : (ON)
To rise a printing plate until Height sensor checks a printing plate or materials for printing when you move a
printing plate backwards by pressing 'STAND BY(인쇄대기)' button. To change ON/OFF, press Button 7(UP) &
Button 8(DOWN). If you repeatedly print out a same height, Turn OFF this function to press Button 8(DOWN).
It can save you time. (*Caution, Height sensor can not perceive Transparent materials.)
8. Automatic drop : (ON)
To drop a printing plate when Height sensor perceives a printing plate or materials for printing by pressing
'STAND BY(인쇄대기) button to move a printing plate backwards. To change ON/OFF, press Button 7(UP) &
Button 8(DOWN). (*Caution, Height sensor can not perceive Transparent materials.)
9. Automatic Cleaning : (24h)
Printer cleans itself as per setting time. It cleans after 24 hours since the last operating, not every 24hours.
A. Automatic Repeat Sec : (00Sec)
To move a printing plate backwards and start to print out automatically as per setting time.
(It can be used, only if print data is ready.)
B. Automatic INK RESET : (OFF)
To reset inks automatically.
C. UV Level : ( - -%)
To control the UV level.
4. To print out
Put a printing material on a printing plate.
[ - If a printing material is transparent, Affix opaque tape beside the material to
be perceived the height
- If a printing material is high, push back the printing plate slightly to be perceived by height
sensor ]
à Press 'STAND BY' button
à Send the data that you want to print out
5. Cautions
* If you need to replace a Printer head by damage or nozzle blocked, you will be
changed. Please keep a print head safe and pay attention when you use.
* Check a nozzle at least once or more a day.
* Clean a print head at least once or more every other day.
* When do you use the UV printer, you need to control the UV Level.
If you use high level for UV lamp or easy to reflaction material, it will be clock the
head as faster.
* Please check the trash bottle many time. Because the overflow from the bottle, the
machine will be gotten electric problem.
* The ink expire day is only 5month, please don’t use it more date and change new
ink.
- If you are not use the windows XP, please set the compatibility mode at first.
-When the setting dialog box is appeared, If your computer is connected with just one
printer, click “OK” button
- While run the adjustment program, if the error message is appeared, please check the following items.
Communication error occurred
n First, Check the power of the printer
n Second. the usb connection between computer and printer.(Whether the sign is <*PRINT MODE*
WAIT!> or another words)
n Third, Check the message on the LCD of the remote
n Fourth, When you select the printer model at the above “auto selection”, check whether you select the
print model name correctly or not.
“After adjust the problem, please reboot the computer”