Professional Documents
Culture Documents
Boomer T1: Single-Boom Face Drilling Rig For Narrow Drifts and Tunnels With Cross Sections Up To 23 M
Boomer T1: Single-Boom Face Drilling Rig For Narrow Drifts and Tunnels With Cross Sections Up To 23 M
2 3
Technical specifications
Packs a punch in narrow drifts
= Standard = Option
COP 1638HD+
Total installed power 59 kW*
The Boomer T1 has been specially engineered to suit smaller, narrower drifts and tunnels COP 1838HD+ Main motors 55 kW*
COP 2238HD+ Main motors 75 kW*
with cross sections up to 23 m². The carrier features high ground clearance as well as spring Water mist flushing, external water and air supply (water or air oil cooler) Voltage 380-1 000 V
applied hydraulic release brakes. For maximum durability, the rig is equipped with a heavy- Hole blowing kit Frequency 50 Hz - 60 Hz
duty aluminium feed with high bending and torsional resistance. Rock drill lubrication warning kit Starting method star/delta 380–690 V, direct start 1000 V
Big hole drilling system Starting method – soft start (not for 1000 V)
Transformer 4 kVA
+ Certified power and performance Electronic overload protection for electric motors
Boom
The rig is powered by a 4-cylinder diesel engine that concurrently offers Percussion hour meter
BUT 4
powerful performance and low emissions to reduce environmental impact. The Digital volt/ampere meter in electrical cabinet
Automatic boom lubrication kit (rear part of the boom)
engine is available with stage IIIA certification. Phase sequence and eart fault indicator
Boom suspension system
Battery charger
Long Hole Drilling system (manual rod handling), including BMH or BMHS
2000 series production feed (1.2, 1.5 or 1.8 m extension steels), BSH 45 drill Dual controls for cable reel
steel, rear stinger, FAM T1 angle reading insturment Electrical cable (Buflex)
Connector
Feed Plug PC4/PC5
+ Easy to operate and maintain BMH 2825, drill steel length 2 500 mm
Socket PC4/PC5
Switch gear
BMH 2831, drill steel length 3 090 mm
The operator can enjoy an ergonomically designed cabin with a user-friendly
*Larger powerpacks may be used at high altitude or with certain options.
BMH 2837, drill steel length 3 700 mm
interface to easily monitor and control all rig functions. The rig is also cleverly
Telescopic feed BMHT 2000-series (max 3.7 m)
designed to provide straightforward access to all service points for easy
maintenance. Extension drilling set BSH 110 (BMH feeds only) Carrier
Bulk head style hose tree on feeds Deutz 4-cylinder, D914 L04, EPA III/COM III (Tier 3/Stage IIIA) approved
4-stroke prechamber diesel engine (55 kW, 77.8 hp at 2 300 rpm, 270 Nm at
1 500 rpm)
+ The COP MD20 series Compressor: Atlas Copco LE7 Four wheel drive
Electrical system 24 V
Rock drills in the COP MD20 series provide separate lubrication of driver
Batteries 2x12 V, 70 Ah
and gear as well as pressurized side bolts and mating surfaces for reliable Hydraulic system
Working lights, 3x80 W LED, 24 V DC
operation, low maintenance costs and long intervals between overhauls. The Low oil level indicator
Tramming lights, 8x40 W LED, 24 V DC
variable and reversible rotation motor ensures high torque with exceptional Oil temperature meter
Illuminated stairs
speed control. Filtration 16 μm
Automatic differential lock on front axle
Oil filter indicator
Tires, 8.25xR15
Mineral hydraulic oil
Clearance outside axles rear 15°
Electric oil filling pump
Front and rear hydraulic jacks
Water/oil cooler in stainless steel
Fuel tank volume, 4-cylinder engine: 60 l
Hydraulic oil thermostat
Manual lubrication kit
Ni-Cr plated piston rods (limitations exist)
A comprehensive
Fire suppression system ANSUL (manual, checkfire or automatic)
*Only with water cooled diesel engines
Rig washing kit
service offering
Shelf for bits and tools
Control system Holder for spare drill rods
Direct Control System (DCS2) Cold weather package
Even the best equipment needs to be Feed Angle Measurement, FAM T1 (including electronic parallel hold)
serviced regularly to make sure it sustains
peak performance. An Epiroc service
solution offers peace of mind, maximizing
availability and performance throughout
the lifetime of your equipment. We focus
on safety, productivity and reliability.
4 5
Technical specifications = Standard = Option Technical specifications
4 677
Cabin (optional) Recommended cable sizes and lengths (75 kw)
ROPS/FOPS approved airconditioned cabin, noise level <80 dB(A) Voltage Dimension, mm2 Diameter, mm Length, mm
2 726
Fixed seat 660-690 V 3x35+3G6+2x1.5 28 200
Front window, 16 mm 1 000 V 3x35+3G6+2x1.5 28 200
2 024
Front window, 24 mm Recommendations are given for surrounding temperature of 40°C.
T1D
Manual spotlight 500-525 V 3x35+3G6+2x1x1.5 33 200 Dimension illustration, optional equipment mounted (dimensions in millimeters).
12 V outlet 550-575 V 3x35+3G6+2x1x1.5 33 200
660-690 V 3x35+3G6+2x1x1.5 33 200
2 500
1 000 V 3x35+3G6+2x1.5 28 200
Drill rods Recommendations are given for surrounding temperature of 40°C.
Dimension Minimum hole diameter
R38-H35-R32 45 mm
R38-H35-SR35 speedrod 45 mm
Dimensions
2 500
T38-H35-R32 45 mm Width 1 300 mm
30º 30º
T38-H35-R32 speedrod 45 mm Height, roof down 2 024 mm
4 910
T38-H35-SR35 45 mm Height, roof up 2 726 mm
6 500
T38-H35-R35 speedrod 48 mm Length, tramming
BMH 2837
T38-R39-R35 48 mm
Ground clearence 296 mm R 4 400
1 520
T38-R39-SR35 45 mm
Turning radius outer/inner 4 400/2 750 mm R 2 750
T38-R38-R35 48 mm
40º
Weight
Extension rods for injection drilling/RAS Total 11 000 kg
Dimension Minimum hole diameter Boom side 7 100 kg
R32 speedrod 51 mm Engine side 3 900 kg
T38 speedrod 64 mm Depending on configuration
4 190
4 570
Shank adapters Noise and vibration
Thread Diameter Length Operator sound pressure level in canopy, drilling, free
field (ISO 11201)
103±6 dB(A) re 20 uPa Coverage area (dimensions in millimeters Turning radius (dimensions in millimeters
R38 38 mm 435 mm
unless other specified). unless other specified).
T38 38 mm 435 mm Operator sound pressure level in cabin, drilling, free
80±5 dB(A) re 20 uPa
field (ISO 11201)
R32 38 mm 525 mm
Operator sound pressure level working close to
T38 38 mm 525 mm 103±6 dB(A) re 20 uPa
machine, drilling, free field
Sound power level (ISO 3747), drilling, free field 123 dB(A) re 1 pW
Peak C-weighted instantaneous sound pressure level
Couplings Less than 130 dB
(EN16228)
Thread Diameter Length
Vibration levels seated, drilling (ISO 2631-1) (cabin) 0.07±0.07 m/s^2
R38 55 mm 170 mm
Vibration levels standing, drilling (ISO 2631-1) (cabin) 0.07±0.07 m/s^2
T38 55 mm 190 mm
Vibration levels seated, drilling (ISO 2631-1) (canopy) 0.15±0.15 m/s^2
Vibration levels standing, drilling (ISO 2631-1) (canopy) 0.15±0.15 m/s^2
6 7
epiroc.com
commitment drives us to keep moving forward.
Performance unites us, innovation inspires us, and