Professional Documents
Culture Documents
For
AEROFOAM® XLPE
Page 1 of 3
Cross-linked closed cell polyolefin foam with permanent bonded Alupet foil. Generally used for
thermal insulation of chilled water, AC and condensate piping.
Our Insulation material is UL listed, CE marked and CFC & HCFC free (proved by test report issued
by accredited lab).
For indoor applications (ambient temperature: 24 °C; line temperature: 4.5 – 5.5 °C; relative
humidity: 50%; pipe diameters: up to 6”) we recommend a minimum thickness of 12 mm.
For outdoor applications (ambient temperature: 46 °C; line temperature: 4.5 – 5.5 °C; relative
humidity: 65%) we recommend a minimum thickness of 20 mm (pipe diameters up to 2 1/2”) and 25
mm (pipe diameters up to 6”).
Page 2 of 3
Cross-linked closed cell polyolefin foam with self-adhesive coating, permanent bonded with reinforced
Alupet foil. Generally used for thermal insulation of air ducts.
Our Insulation material is UL listed, CE marked and CFC & HCFC free (proved by test report issued
by accredited lab).
Ventilation ducts:
For indoor applications (ambient temperature: 24 °C; line temperature: 11 °C; relative humidity:
50%) we recommend a minimum thickness of 12 mm.
For outdoor applications (ambient temperature: 46 °C; line temperature: 11 °C; relative humidity:
65%) we recommend a minimum thickness of 25 mm.
All statements and technical information are true to the best of our knowledge and are based on tests
conducted by us. However, before using, user shall determine the suitability of the product for
intended use.
Page 3 of 3