Professional Documents
Culture Documents
A two-component, vinyl modified epoxy resin based sealer coat. It provides high build film with excellent compatibility with
various coats such as epoxy, urethane, chlorinated rubber, acrylic and self polishing copolymer anti-fouling paint.
Recommended
As a sealer coating for the hull outside of marine vessels.
us e
Physical Properties
Finis h and
Flat. Light Aluminum, Yellow Light Aluminum
Color
Specific
Approx. 1.2 ~ 1.4 for Mixture of Base and Curing agent.
gravity
Solids by
Approx. 50 % (Determined by ISO 3233)
volume
Spreading rate
5.0 ㎡/L in 100 ㎛ dry film thickness on a smooth surface
(Theoretical)
Application details
Surface Remove any oil, grease, dirt and any other contaminants from the surface before painting by proper
preparation method such as solvent cleaning and fresh water washing, etc. * Steel : Blast cleaning to Sa2.5 or Power
tool cleaning to St3, etc.
Preceding
Korepox EH2350, Korepox EH2351, Korepox EH2352, etc., or according to specification.
coat
Fan : 60 º
Mix thoroughly together prior to application in the proportions with power agitator as delivered.
The surface temperature should be at least 2.7 ℃ (5 ℉) above dew point to prevent condensation.
In confined areas, ventilate with clean air during application to assist solvent evaporation.
Film thicknes s 100 ㎛ dry Depending on the purpose and the area of use, different film thickness may be applied.
Set to touch 1h 1h 1h
Dry through 24 h 12 h 10h
* The actual drying time is subject to the film thickness, ventilation, humidity etc.,
and drying time under other temperature conditions should be checked and informed by KCC.
Subs equent Korepox Topcoat H.B. ET5740, Korepox Topcoat H.B. ET5745, Seacare A/F795 Series, Seacare A/F783
Before overcoating, remove the oil, salt, chalking material and any other contaminants on aged coating
film completely by proper cleaning method such as solvent cleaning and/or fresh water washing.
Heat
Continuous : 93 ℃/200 ℉ (Non-immersion service)
res is tance
Non-continuous : 121 ℃/250 ℉ (Non-immersion service)
temperature
Remarks
Note Do not store at temperature below 5 ℃/41 ℉ or above 40 ℃/104 ℉.
Protect skin and eyes from direct contact with liquid paint, and avoid prolonged breathing of solvent
vapors.
Respiratory protection is recommended when applying this product in confined spaces or stagnant air.
1's t is s ue 2011-07-01
Dis claimer : The information in this data s heet is believed to the bes t of our knowledge bas ed on laboratory tes t and practical
experience. However, there are many factors affecting the performance of product and the product quality its elf, s o we are not
able to guarantee without the confirmation of the purpos e of us ing the product from us in writing. We res erve the right to change
the data without notice and you s hould check that this data s heet is current prior to us ing the product.