This technical data sheet provides information on Piopoxy Steel Prime, a two-component epoxy-based paint formulated for anti-corrosive protection of steel, iron, and galvanized sheets. It describes the product's key features, specifications, physical properties, application procedures, packaging, storage, and safety precautions. The primer has good water and corrosion resistance, flexibility, toughness, and adhesion. It is suitable for new and maintenance applications on industrial equipment, ship superstructures and hulls.
This technical data sheet provides information on Piopoxy Steel Prime, a two-component epoxy-based paint formulated for anti-corrosive protection of steel, iron, and galvanized sheets. It describes the product's key features, specifications, physical properties, application procedures, packaging, storage, and safety precautions. The primer has good water and corrosion resistance, flexibility, toughness, and adhesion. It is suitable for new and maintenance applications on industrial equipment, ship superstructures and hulls.
This technical data sheet provides information on Piopoxy Steel Prime, a two-component epoxy-based paint formulated for anti-corrosive protection of steel, iron, and galvanized sheets. It describes the product's key features, specifications, physical properties, application procedures, packaging, storage, and safety precautions. The primer has good water and corrosion resistance, flexibility, toughness, and adhesion. It is suitable for new and maintenance applications on industrial equipment, ship superstructures and hulls.
Pioneer Marine Coatings Cured State Epoxy Steel Primer It is a two-component Parameters Results epoxy-based paint specially formulated to Opacity, give excellent anti-corrosive protection to a 150 microns wft 95% min wide range of applications. It is ideally used Finish Eggshell as a primer for galvanized sheets, iron, and Adhesion, 100/100 cross hatch steel. Recommended as an undercoat for 7 days curing @1mm acrylic-based lacquers, baking enamels, Hardness, epoxy enamels, nitrocellulose lacquers and 7 days curing 3H-4H any topcoat finish which require durable Flexibility at priming. 1/4" mandrel No cracking Impact Test, Key Features 50cm X 500 g No cracking • Good water and corrosion resistance. QUV, 200 hrs No cracking, no • Good flexibility and toughness (ASTM G154 Cycle 1) blistering, no chalking • Long potlife SST, 1000 hrs On-going (c/o 3rd • Won't peel or crack Party Tester) • Good drying and curing properties • Suitable for superstructure, hulls, decks, topside Applications • Suitable for both new and maintenance It is suitable for new and maintenance appli- application cations of any industrial equipment, super- structure, hulls, decks, and topside, making Product Specifications/ Typical it the best protection against corrosion. Properties/ Physical Characteristics Table 1. Physical Properties: Application Procedure Uncured State Surface Preparation. Patch damaged areas Parameters Results and all joints and cracks using Pioneer Color Epoxy. The substrate should be sanded Part A Gray, Red smooth to a sound surface. The surface to Part B Clear Yellow be painted must be dry, thoroughly cleaned, Viscosity @28C free from oil, grease, rust, loose particles and Part A, KU 80 - 85 other contaminants to ensure good adhesion Part B, secs 15 ± 2 of the primer. The steel substrate should be %Solid THEORETICAL sandblasted clean to class 2.5 minimum or by Weight 65 - 75 mechanically clean. Specific Gravity, g/mL Part A 1.65 ± 0.03 Method. Add one part by volume catalyst to Part B 0.880 - 0.90 three parts Epoxy Steel Primer base. Mix Fineness of Grind until homogeneous and let it stand for 15-20 (FOG), NS 4-5 minutes before application. Always use Potlife @29C 8 hrs Pioneer Epoxy Reducer to thin down to Induction Time 15 - 20 mins spray viscosity. It can be applied by brush, Drying Time roller, conventional spray or airless spray. Set-to-touch 1/2-1 hr Tack-free 4-6 hrs Dry-hard 24 hrs Dry- through 7 days 2 of 2
Cleaning. Clean all tools or equipment used Warranty and Disclaimers
while the coating is still in its uncured state. Unless an additional warranty is specifically stated on the applicable product packaging or product literature, Pioneer warrants that each Use Pioneer Epoxy Reducer or lacquer Pioneer product conforms with the applicable Pioneer product specifica- thinner to clean tools and spills. tion at the time of shipment, and when properly used and maintained in accordance with Pioneer’s current published Technical Data Sheet (TDS), Packaging will serve the purpose for which it is intended. The recommendations • 16 Liter Set and statements in Pioneer’s TDS are based on good building practice but are not, by any means, an exhaustive statement of all relevant informa- • 4 Liter set x 4 pcs tion. Pioneer shall not be liable for the recommendations in its TDS and the performance of the relevant Product. Pioneer shall also not be liable Storage for any claims, damages or defects arising from, or in any way Keep the container tightly sealed. Store in an attributable to poor workmanship, incorrect design or detailing, use of area with adequate ventilation. Avoid storage the Pioneer product in unsuitable conditions, and force majeure. Pioneer MAKES NO OTHER WARRANTIES, CONDITIONS OR REPRESENTA- near extreme heat, ignition sources or open TIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY flames. IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR Shelf Life CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOMER OR Part A: 12 months based on the USAGE OF TRADE. If the Pioneer product does not conform to this warranty, then the sole and exclusive remedy is, at Pioneer’s option, the manufacturing date replacement of the Pioneer product or refund of the purchase price. Part B: 12 months based on the manufacturing date Limited Liability Except where prohibited by law, Pioneer will not be liable for any loss or damage arising from the use or application of the Pioneer product, Health and Safety Precautions Read the whether direct, indirect, special, incidental or consequential, regardless safety data sheet before use. Safety precau- of the legal theory asserted, including warranty, contract, negligence or tions must be strictly followed during strict liability.
storage, handling, and use.
Do not use this product without first taking all appropriate safety measures to prevent property damage and injuries. Use only in well-ventilated areas. Store in a cool, dry place in tightly closed receptacles. Vapors are heavier than air and may spread along floors. Vapors may form explosive mixtures with air. Prevent the creation of flammable or explosive concentrations of vapors in the air and avoid vapor concentrations higher than the occupational exposure limits. Avoid inha- lation of vapor, dust and spray mist. Avoid contact with skin and eyes. Eating, drinking, and smoking should be prohibited in an area where the material is handled, stored and processed. Avoid storage near extreme heat, ignition sources or open flame. Keep the container tightly sealed. Store in an area with adequate ventilation. KEEP OUT OF REACH OF CHILDREN.