Professional Documents
Culture Documents
1. What is the best practice Systems Manager enrollment method when deploying corporate-
owned iOS devices?
A. manual
B. Apple Configurator
C. Sentry enrollment
D. DEP
Answer: B
Explanation:
Reference: https://meraki.cisco.com/lib/pdf/meraki_whitepaper_ios.pdf
2. A new application needs to be pushed to all iOS devices. Some devices report “NotNow” in
the event log and do not install the application.
What does the “NotNow” event indicate?
A. The application requires the most recent iOS version.
B. The device is locked with a passcode.
C. The device cannot connect to Apple servers.
D. The device cannot connect to Cisco Meraki servers.
Answer: B
Explanation:
Reference: https://community.meraki.com/t5/Mobile-Device-Management/Check-NotNow-
Status/td-p/3887
3. For which two reasons can an organization become “Out of License”? (Choose two.)
A. licenses that are in the wrong network
B. more hardware devices than device licenses
C. expired device license
D. licenses that do not match the serial numbers in the organization
E. MR licenses that do not match the MR models in the organization
Answer: B,C
Explanation:
Reference:
https://documentation.meraki.com/General_Administration/Licensing/Meraki_Licensing_FA Qs
For an AP that displays this alert, which network access control method must be in use?
A. preshared key
B. WPA2-enterprise with my RADIUS server
C. splash page with my RADIUS server
D. MAC-based access control with RADIUS server
Answer: A
6. Which configuration step is necessary when automatic updating is required of iOS apps
provisioned through Systems Manager that are found in the App Store?
A. No configuration step is necessary; automatic updating is the default behavior.
B. Configure automatic updating of iOS devices in the Meraki installed profile.
C. Create a security policy that enables automatic updates.
D. Create a profile with automatic update enabled and apply it to iOS devices.
Answer: C
Explanation:
Reference:
https://documentation.meraki.com/SM/Apps_and_Software/Updating_Managed_iOS_Apps
8. What are two ways peers interact with ports that Auto VPN uses? (Choose two.)
A. For IPsec tunneling, peers use high UDP ports within the 32768 to 61000 range.
B. Peers contact the VPN registry at UDP port 9350.
C. For IPsec tunneling, peers use high TCP ports within the 32768 to 61000 range.
D. Peers contact the VPN registry at TCP port 9350.
E. For IPsec tunneling, peers use UDP ports 500 and 4500.
Answer: B,C
Explanation:
Reference: https://documentation.meraki.com/MX/Site-to-
site_VPN/Meraki_Auto_VPN_-_Configuration_and_Troubleshooting
9. One thousand concurrent users stream video to their laptops. A 30/70 split between 2.4 GHz
and 5 GHz is used.
Based on client count, how many APs (rounded to the nearest whole number) are needed?
A. 26
B. 28
C. 30
D. 32
Answer: C
A packet arrives on the VPN concentrator with source IP 10.168.70.3 and destined for IP
10.116.32.4.
What is the next hop for the packet, based on this concentrator routing table?
A. The concentrator gateway (10.128.124.62) is the next hop.
B. Not enough detail is available to determine the next hop.
C. The packet is stopped.
D. The Auto VPN peer “Store 1532 C appliance” is the next hop.
Answer: B
12. What occurs when a configuration change is made to an MX network that is bound to a
configuration template?
A. The configuration change in the bound network is combined with the template configuration
inside the template.
B. The more restrictive configuration is preferred.
C. The configuration change in the bound network overrides the template configuration.
D. The template configuration overrides the configuration change in the bound network.
Answer: A
Explanation:
Reference: https://documentation.meraki.com/General_Administration/Templates_and_Config_
Sync/Managing_Multiple_Networks_with_Configuration_Templates
13. In an organization that uses the Co-Termination licensing model, which two operations
enable licenses to be applied? (Choose two.)
A. Renew the Dashboard license.
B. License a network.
C. License more devices.
D. Call Meraki support.
E. Wait for the devices to auto-renew.
Answer: A,C
Explanation:
Reference: https://documentation.meraki.com/General_Administration/Licensing/Meraki_Co-
Termination_Licensing_Overview
14. Which two primary metrics does Meraki Insight use to calculate the Application Performance
Score? (Choose two.)
A. Maximum Jitter
B. Total Bandwidth Usage
C. Maximum Latency
D. Per-flow Goodput
E. Application Response Time
Answer: D,E
Explanation:
Reference: https://cloudcontrolled.uk/wp-content/uploads/2018/08/MerakiInsight.pdf (04)