Professional Documents
Culture Documents
STREET LIGHTING
REMOTE MANAGEMENT
& SMART CITY PLATFORM
[FPE-220 PLC electronic ballast controller - data sheet] April 26, 2016 Ver 1.0
inteliLIGHT® is a street lighting remote management system with in-depth grid management capabilities that ensures real-time feedback of any change occurring
along the grid, increases energy efficiency (up to 35% energy saving through dimming and smart scheduling) and optimizes maintenance activities (up to 42%
reduced operational costs). Also, inteliLIGHT® is a base platform for smart city applications like EV chargers, city-wide sensing devices or safety infrastructure – all
powered from the street lighting grid.
FPE‐220
PLC ELECTRONIC BALLAST
CONTROLLER
› Controls lamps with electronic ballast up to 500 W
› Uses Power Line Communication (PLC) and
includes data retransmission mechanism
› Provides real-time feedback through measured
parameters
› Allows a wide range of configurable parameters
› Designed to be installed at the base of the
streetlight pole or inside the lamp
› Built for outdoor installation, functions in extreme
temperatures and humidity conditions
› Supports remote software upgrade
4A Fundatura Harmanului Street / Brasov 500240, ROMANIA
Phone: +40 268 333 766 / info@flashnet.ro / www.intelilight.eu
1 / 2 Subject to change without notice ©inteliLIGHT®
STREET LIGHTING
REMOTE MANAGEMENT
& SMART CITY PLATFORM
[FPE-220 PLC electronic ballast controller - data sheet] April 26, 2016 Ver 1.0
FPE‐220
Lamp Type LED, CF, HID
Maximum lamp power 500W
ON/ OFF function
Dimming
Dimming range 0% – 100%
Dimming steps stepless
Control interface 0-10V / DALI
Network interface PowerLine CENELEC-C band
Communication protocol LONWORKS/ANSI709.1
Retransmission mechanism
Power supply 230VAC / 50Hz – 60Hz
Overvoltage protection 5 minutes @ 400VAC
Power consumption Max. 2W
IP rating IP67
Operating temperature -25°C to +65°C
Dimensions (length x width x height) 106 x 75 x 51 mm
CE, EN 50065-1 (2005), EN 50065-2-1 (2003),EN 61547
(2010), EN 55015 (2007), EN 61000-3-2 (2006), 60068-2-
Certifications
1 (2007),60068-2-2 (2007), ANSI/IEC 60529, LonMark
OLC
Measured parameters
Lamp power
Line voltage
Current
Active power
Reactive power
Apparent power
Power factor
Energy consumption (active/ reactive)
Running hours
Alarms monitored
Overvoltage detection
Overcurrent detection
Lamp or ballast fault detection
Device failure
Configurable parameters
Auto on enabled/disabled/ auto on time
Auto off enabled/disabled/auto off time
Start state: ON/OFF
ON/OFF power threshold
Overvoltage threshold
Output transfer function 0-10 V / DALI
Strike retry count
Fade time
Lamp warming time
Lamp cooldown time
- ON/ OFF
Operation mode - ON/ OFF + DIMMING (power tracking/ Transfer
function / PVM)
Pole door open, pole impact detection, pole ground
Optional sensors available
missing
4A Fundatura Harmanului Street / Brasov 500240, ROMANIA
Phone: +40 268 333 766 / info@flashnet.ro / www.intelilight.eu
2 / 2 Subject to change without notice ©inteliLIGHT®