Professional Documents
Culture Documents
SPCT10-12S
Gateway
cloud
www www App Operation
WIFI, GSM/GPRS
LAN, RS485 WIFI NB-IoT,
Zigbee
LoRa
SPCT10 is a smart electric safety supervision and The system can realize pre-alarm before loading
power Management system and includes both failure, online power management, real-time power
hardware and software, which integrates the most effciency monitoring, real-time monitoring of electrical
frontier technologies: AI, Big data, IoT and cloud circuit parameter (voltage, current, power KWH, etc),
and help identify energy savings and further to save
computing.
energy cost, through analysis of collected data, power
consumption analysis.
01 www.sivpl.com
Smart Electric Safety Supervision
and Power Management System
Structure
Power button
Push button
Shifting between
WLAN and WIFI
& reset
Communication module
Pushbutton Switch
Switching on/off & communication indicator
iMCB
iRCBO
Indicator
on/off status
Connection pin
www.sivpl.com 02
Smart Electric Safety Supervision
and Power Management System
Hardware introdution
Power supply module with surge protection Smart Metering Breaker - iMCB
www.kayson.com
03 www.sivpl.com
Smart Electric Safety Supervision
and Power Management System
Features
Device Extendable
This system is a kind of "modular device", which can be
extendable as traditional MCB and RCBO. The current is
up to 80A and 1,2,3 and 4Pole for iMCB are available.
Minimum Space Requirement
Except for Power supply module of 36mm and
Communication module of 18mm, the iMCB and iRCBO
have an extra 9mm or 18mm control module, diff erent
from traditional MCB and RCBO.
Easy Installation
All devices are mounted in 35mm Din Rail and connected
by connection pins or flexible flat cable. No special tools
are required for the entire connection process.
System Compatib ility
This system can be compatible with other systems, such
as smart home, fire monitoring system, energy efficiency
management system, smoke and voice control etc..
Electrical Fault Analysis
The device can realize real-time analysis of all electrical
faults of both main and branch lines: short circuit, earth
leakage, overload, over/under voltage, overheated, arc
fault, etc..
Monitor of Electrical Circuit Parameter
The device may make realize real-time monitoring of
electrical circuit parameters: voltage, current, power
,temperature, residual current and KWH.
Full Protection
This system includes all protections: overload, short
circuit, earth leakage, surge, over/under voltage, arcing
fault, phase loss, unbalance, high temperature
Max. Power and Current Setting
The power and current under rated current and power
can be adjustable through the App or software platform
P25D
www.sivpl.com 04
Smart Electric Safety Supervision
and Power Management System
Benefits
Early warning system and alarm Power management and cost analysis to reduce
(Pre-alarm Maintenance) and schedule energy costs.
Continuous monitoring of electrical circuit parameters of each The cost of energy will rise continuously. In order to cut
breaker including both main and branch lines(such as current, costs, we first have to know where they arise. The smart
voltage, earth leakage current, power and temperature) makes power management system helps illustrate and analyze the
it possible to detect the early electrical faults and make early- instantaneous energy consumption levels and realize the
warning before any unforeseen event. It improves the safety real-time power efficiency monitoring. Furthermore, the
and reliability and electrical system and may be used widely in calculated active energy can be used to roughly allocate the
building as fire system solution. costs at the output level. Therefore, it help identify energy
saving, and further to save energy cost, through analysis of
collected data and power consumption.
Remote control
05 www.sivpl.com
Smart Electric Safety Supervision
and Power Management System
Software Introduction
APP
It includes six functions:
Power Consumption
Remote control, Real-time monitoring, Event alarm and
Power consumption curve of main lines and each sub
-
push, Power consumption curve, Timer, Max. Power and
lines may be showed in APP monthly and hourly.
Current setting, auto-test of Residual Current.
Event Alarm and Push
All the events recorded and fault alarm will be
pushed through App.
Timer
Users are able to remotely set the power demand they
want to target with a weekly, daily or hourly resolution
Remote Control
iMCB and iRCBO may be operated individually or be
switched on/off all together through App remotely.
And for safety, it can not be switch on through APP
after switching off manually.
Real-time Monitoring
The system monitors electrical circuit parameters :
voltage, current, Power ,temperature, Residual Current
and KWH and these parameters may be showed in APP.
www.sivpl.com 06
Smart Electric Safety Supervision
and Power Management System
Software Platform
07 www.sivpl.com
Smart Electric Safety Supervision
and Power Management System
Software platform
Power Management
In this software platform, the user may find the basic It can reduce the operation cost of electrical terminal
analytic functions such as a dashboard data, instantaneous system, simplify the management of energy operations,
values, comparison functions and cost allocation by decrease manpower of daily power management, and save
consumer group. human resources cost.
The building energy flows and costs are transparent, In order to further provide conditions for mining, analyzing,
therefore, this solution is suitable for energy management processing and handling energy data, The energy efficiency
and energy cost allocation application seeking energy management system we built, can not only eff ectively solve
efficiency improvement and cost reductions. real-time energy balance and monitoring management, but
also build up condition to further dig, analyze, process,
The platform realizes the collection, storage, management handle data, through filing and management of a large
and efficient use of the terminal energy information. It amount of historical data.
analyzes, processes, handles all energy data, and output to
keep the system run in best state, after system intelligent
configuration.
www.sivpl.com 08
Smart Electric Safety Supervision
and Power Management System
Applications
Small-sized
In the industrial sector, solutions can be installed in small plants
Industrial
to mid-sized plants, in infrastructure facilities and Sector
process plants to monitor operations, using data analysis
to minimize downtime.
Mid-sized plants
business opportunities.
Hotels
Schools
Public facilities, such as schools, sport centers and
healthcare facilities, can secure service continuity and
develop predictive maintenance forecasts.
Sport
Centers
Public
facilitites
09 www.sivpl.com
Smart Electric Safety Supervision
and Power Management System
Applications
Internet cloud
SPCT10 - CMTW SPCT10 - Cm485 SPCT10 - CMZ SPCT10 - CMNBT SPCT10 -CML SPCT10 -AP
www.sivpl.com 10
Smart Electric Safety Supervision
and Power Management System
Applications
Hospital/Offices University/Schools
The “Smart Electricity” APP helps hospitals to The “Smart Electricity” system can realize
realize terminal power collection, store large 7×24-hour school monitoring, get out of the limit
amounts of data in real time, acquire first-hand and low efficiency of human work, and monitor
data in real time, develop data center to the device operation status in real time through
extract, dig, analyze and summarize data, and IoT system.
finally provide proof for important decisions.
The mobile operation APP, with big data system, To realize the smart electrical management in
can digitally visualize all shop’s power bank, the system will activate alarm in time while
consumption, to graphically show and monitor there are potential hazard, such as abnormal lines
the electrical operation. or overload circuit. It will accurately report the fault
cause, and timely check the safety hazards
through technical means.
11 www.sivpl.com
Smart Electric Safety Supervision
and Power Management System
Technical specification of power supply module
Power supply module may offer stable DC power for smart breaker MTS3 and owns class II surge protection. It is also the
necessory part for smart breaker MTS3 system.
www.sivpl.com 12
Smart Electric Safety Supervision
and Power Management System
Technical specification of iRCBO
Smart RCBO may be used as main switch and line protection in Smart Breaker MTS3 system. It is also the necessory part
for Smart Breaker MTS3 system as main switch.
Poles 2P 4P
Rated voltage Ue Vac 230 400
Frequency (HZ): Hz 50/60
Rated current A 16,20,25,32,40,50,63,80
Type (wave form of the earth leakage sensed) AC
Rated residual current (I∆n) mA 30
Rated insulation voltage Ui Vac 500
Rated Breaking capacity acc.to IEC61009 ultimate Icn A 6000
Breaking time under I∆n <=0.1 S
Breaking time under Icn <=0.04S
Triping characteristic C (5-10In)
Other functions Over/under voltage protection , warning and alarm
Max.power and current setting
Auto test of earth leakage current
High temperature protection, warning and alarm
Monitor of current, power and voltage in real-time
Arcing fault protection, warning and alarm
Remote control
Timer
Meter
Event record and notice
Breaking time when voltage is over 265Vac 10S
Over/undder voltage warning when voltage is higher than 250Vac or lower than 190Vac
Breaking time when the current reach the 5s
max.current or power setup
The time for switching on automatically after 5s
auto-test of earth leakage current
Electric life Times
Mechanical life Times
Conductor cross-sections mm² 38
Pollution degree 2
Numbers of modules( 1 module=18mm) 3 (54mm) 5 (90mm)
Ambient temperature: ºC -15 - +40
Storage temperature: ºC -25---+70
Humidity < 95%
Altitude: m <=2000
Terminal connection Cable/Pin-type busbar
Mounting Din rail En60715(35mm) by means of fast clip device
Connection From top to bottom
13 www.sivpl.com
Smart Electric Safety Supervision
and Power Management System
Technical specification of iMCB
Smart Breakers are the core part of MTS3 smart system, it combine protection, metering, monitor, timer, automation,
event record and notice.
Item Code: SPCT10 - MC1 SPCT10 - MC2 SPCT10 - MC3 SPCT10 - MC4
Picture
Poles 1P 2P 3P 4P
Rated voltage Ue Vac 230/400-240/415
Operational voltage Vac Min.90 Max:250/440
Frequency (HZ): Hz 50/60
Rated Current A 10,16,20,25,32,40,50,63,80
Rated insulation voltage Ui Vac 500
Rated impulse withstand voltage (1.2/50) Uimp Vac 2500
Rated Breaking capacity acc.to IEC60899 Icn A 6000
Breaking time under Icn <=0.04S
Triping Characteristic B (3-5In)
C (5-10In)
D (10-14In)
Other Functions Over/under voltage protection , warning and Alarm
Max.Power and Current Setting
Auto test of earth leakage current
High Temperature protection, warning and Alarm
Arcing Fault Protection, warning and Alarm
Monitor of Current, power, voltage in real-time
Remote control
Timer
Meter
Event record and notice
Breaking time when voltage is over 263Vac 10S
Over/undder voltage warning when voltage is higher than 250Vac or lower than 190Vac
Breaking time when the current reach the 5s
max.current or power setup Times
Electric Life Times 10000
Mechanical life mm² 20000
Conductor cross-sections 38
Pollution Degree 2
Numbers of Modules( 1 module=18mm): ºC 1.5 (27mm) 2.5 (45mm) 4 (72mm) 5(90mm)
Ambient temperature: ºC -15 - +40
Storage temperature: -25---+70
Humidity m < 95%
Altitude: <=2000
Terminal C onnection Cable/Pin-type busbar
Mounting Din rail En60715(35mm) by means of fast clip device
Connection From top to bottom
www.sivpl.com 14
Smart Electric Safety Supervision
and Power Management System
Technical specification of communicaiton module
Communicaiton module includes wireless and wire communications, it also has function of hotpot.
15 www.sivpl.com
Smart Electric Safety Supervision
and Power Management System
Ordering information
Communication Module
Numbers of
Rated input Communication
Pictures Type Code Modules( 1 Weight
voltage (Vdc) type
module=18mm) Unit: g
12 TCP/IP, Wi-Fi SPCT10- CMTW 1(18mm) 2.43
RS485 SPCT10 - CM485
Zigbee SPCT10 - CMZ
NB-IoT SPCT10 - CMNBT
LoRa SPCT10 - CML
GPRS-2G SPCT10 - CMGP2
Accessory
Accessory Communication
Pictures Type Code
name type
www.sivpl.com 16
Smart Electric Safety Supervision
and Power Management System
Ordering information
17 www.sivpl.com
Smart Electric Safety Supervision
and Power Management System
Technical information
D-curve: (10-14) In
www.sivpl.com 18
Smart Electric Safety Supervision
and Power Management System
Magnetic Release Characteristics for iMCB
An electromagnet with plunger ensures instantanueous tripping in case of short circuit. The IEC60898 distringuishes
three different types: B, C, D
Ambient Temperature
Standard Curve Start Status Test current Test Request Tripping time Applications
for Test
IEC60898 B Cold 3In No trip t≤ 0.1s Only for resistive loads such as: 30ºC
Electrical heating
Cold 5In Trip t < 0.1s water heating
stoves
C Cold 5In No trip t≤ 0.1s Usual loads such as:
Lighting
Cold 10In Trip t < 0.1s Socket outlets
small motor
D Cold 10In No trip t≤ 0.1s Control and protection of circuits
having important transient inrush
Cold 14In Trip t < 0.1s currents(large motors)
The release is activated by a MCU unit in case of overload, the standard defines the range of release for specific
overload value
Referece ambient temperature is 30ºC
Standard Start Status Test current Test Request Tripping time Ambient Temp
Type AC : For which tripping is ensured for residual 30mA-additional protection agains direct contact.
sinusoidal alternating currents, whether suddenly 100mA- Co-ordinated with the earth system according to
applied or slowly rising. the formula <50/R, to provide protection against indirect
Type A : For which tripping is ensured for residual contacts.
sinusoidal alternating currents and residual pulsating 300mA- Protection against indirect contact, as well as
direct currents, whether suddenly applied or slowly fire harzard
rising.
19 www.sivpl.com
Smart Electric Safety Supervision
and Power Management System
Installation and Wiring Diagram
Combined installation and wiring shown according to the illustrated module as below:
Power supply module is needed module, and installed in first place of the row. It can drive max.10pcs iMCB / iRCBO.
1pc iRCBO / iMCB(2,3,4 poles) used as main switch, and follows to the power supply in second place.
Required quantity of iMCB /iRCBO to be installed as branch switches, followed the main switch.
Communication module is also a needed module, and installed in last place of the row. It can drive
max.32pcs iMCB / iRCBO.
All modules are connected by connection pins in each row, and a flexible flat cable is needed to connect multi rows.
Screw size Rated torque Ultimate torque National standard Hard line Cord or hoop terminal
14 mm
6.5 mm
www.sivpl.com 20
Smart Electric Safety Supervision
and Power Management System
Outline and Installation Dimensions
iRCBO 2P
N in L in
ON/OFF
Alarm light
Handle
Indicator
Earthleakage
TEST button
Data port
Rail clip
N out L out
70mm
54mm
50mm
94mm 45mm
iRCBO 4P
ON/OFF
Alarm light
Handle
Indicator
Earthleakage
TEST button
Data port
Rail clip
21 www.sivpl.com
Smart Electric Safety Supervision
and Power Management System
Outline and Installation Dimensions
iMCB 1P
L Terminal
ON/OFF
Alarm light
Handle
ON/OFF
Alarm light
Data port
L Terminal
70mm
27mm
50mm
94mm 45mm
iMCB 2P
N in L in
ON/OFF
Alarm light
Handle
Indicator
Data port
Rail clip
N out L out
70mm
45mm
50mm
94mm 45mm
www.sivpl.com 22
Smart Electric Safety Supervision
and Power Management System
Outline and Installation Dimensions
iMCB 3P
L1 in L2 in L3 in
ON/OFF
Alarm light
Handle
Indicator
Data Port
Rail clip
70mm
72mm
50mm
94mm 45mm
iMCB 4P
L1 in L2 in L3 in N in
ON/OFF
Alarm light
Handle
Indicator
Data port
Rail clip
90mm 70mm
50m m
94mm 45mm
23 www.sivpl.com
Smart Electric Safety Supervision
and Power Management System
Outline and Installation Dimensions
iMCB 1P
18mm 70mm
50m m
UART indicator
Communication
indicator
ON/OFF
Shift to hotspot
& reset 94mm 45mm
Data port
N in L in 36mm 70mm
50mm
LCD Display
94mm 45mm
Indicator
DC output
Data port
Earth Line
www.sivpl.com 24
Infra Ventures (P) Ltd.
1/4, East Patel Nagar, New Delhi-110008
+91-11-45085773
info@sivpl.com
www.sivpl.com