You are on page 1of 2

DESIGN SHEET 1 of 2

JOB No. Rev. No. 0


DQ.No. Date
CLIENT Designed By
DESCRIPTION FIXED BASE FOR MAIN COLUMN Checked By

INPUT DL+LL DL+WL Mark: Detail - A


Bending Moment Kn.m 22.00 21.00
Shear Force (Fx) Kn 8.00 22.00
Axial Force (Fy) Kn 24.00 26.00 DL : DEAD LOAD
Web Depth mm 200 LL : LIVE LOAD
Flange Depth mm 100 WL : WIND LOAD
Bolts Dia mm 20
Embed length (Le) mm 500
Plate Thickness (t) mm 16
Pitch (p) mm 100
guage (g) mm 100
No. COLS ALONG LEN 1 SIDE 1
No. Of Bolts ALONG WIDTH : 3
No. Of Bolts (n) 6 DON’T ENTER VALUE
WEB DEPTH : 200 mm
PLATE LENGTH : 300 mm
PLATE WIDTH : 300 mm
CHECK SPACING : 200 SAFE
GRADE OF CONCRET : 20 N/mm^2

Distance of the extreme Tension Fiber(L) : 200 mm

Effective Lever arm :


: 200 mm
Total Tension in each extreme Bolts ( T ) : Maximum moment / Eff. Lever arm
: 22 / 0.2
: 110.00 Kn
CHECK FOR BOLT SIZE

FORCES IN THE BOLTS Actual Allowable


(Kn) (Kn)
Max. Tension in each Bolt : 18.33

Tension due to Axial Force ( Fy/n )UPLIFT : 4.33

Total Tension ( P= T/4+Fy/n) : 22.67 32.70 HENCE SAFE

Shear in each Bolt ( Fx/n) : 3.67 21.30 HENCE SAFE

CHECK FOR THICKNESS OF PLATE


P
Maximum bending moment in the plate(Ma) P
: x g/ 4
( About criticle section X-X) : 22.67 x 100/4
: 0.57 Kn-M G
100
Thickness of plate required ( t ) : 6 x Ma / f x p

: 11.99 < 16 MM HENCE SAFE

CHECK FOR COMBINED TENSION AND SHEAR

Actual Tension + Actual Shear < 1. 4


Allowable Tension Allowable Shear

(22.67 / 32.7)+(3.67 / 21.3) = 0.87 < 1.4 HENCE SAFE

Designed by SSR
DESIGN SHEET 2 of 2

JOB No. Rev. No. 0


DQ.No. Date
CLIENT Designed By
DESCRIPTION FIXED BASE FOR MAIN COLUMN Checked By

CHECK FOR BOLT LENGTH

2
Bond Stre gra. OF Cocrete M 20 : 0.80 N/mm

Length of bolt required : Tension in bolt/(p x bolt Dia.)x Bond stress


: 22.67 *1000/(p* 20)*0.8
: 451 mm HENCE SAFE

CHECK FOR BASE PLATE SIZE

2
Area of Base Plate (A) : 300x300 = 90000 mm
2
Pres. On concrete pedestal (P/A+M/Z) DL+LL : 4.9 N/mm

Pres on concrete pedestal (P/A+M/Z) DL+WL : 3.7

2
Allowable pressure below the base plate : 5.0 N/mm

Allowable pressure > Actual pressure HENCE SAFE

888 HENCE PROVIDE : 16 mm Thick Plate/ 6 No.s 20 mm Dia Anchor Bolts.

Designed by SSR

You might also like