Professional Documents
Culture Documents
DO NOT USE THIS METHOD FOR DETAIL DESIGN – ALWAYS CONSULT A REPUTABLE SUPPLIER FOR DETAIL DES
Copyright www.PowderProcess.net
The content of PowderProcess.net is copyrighted but no warranty nor liability is ensured. The content of this site is to be seen as a help and important information and calcula
user must always respect all applicable regulation. The use of the information is at the u
Page 1
Air only pressure drop
Pressure
Vacuum
Page 2
Air only pressure drop
PPLIER FOR DETAIL DESIGN
Friction coefficient
Friction coefficient lambda - 0.004484234
Reynolds number Re - 4.21E+05
f (Moody) 0.017936934 1.90E-05 1.613982E-32
A 1.56579E+21 1.66E-05 0.000135
B 1.58099E-17
0.004484234
Psi 16.591664256
Pressure Conveying
Dpa bar 0.08453995 (air only pressure drop corrected with ave
p bar 1.74360143 (abs pressure at blower discharge)
DPcApproximate method, DO NOT USE
bar 0.73 (actual pressure with product)
FOR DETAIL DESIGN. ALWAYS
CONSULT A REPUTABLEVacuum Conveying
DpaCOMPANY bar 0.02917695 (air only pressure drop)
DPc bar 0.41 (actual pressure with product)
help and important information and calculation must always be double checked by the user through the quality procedure of his organization or by checking another source. The
ation. The use of the information is at the user and its organization own risk and own cost.
1740630330
Page 3
Air only pressure drop
P2^2 10266755625
109578.21843
31090505625
171318.05303
Pressure drop Pipe only DP Pa 8253
DP bar 0.08
1740630330
Pressure drop actual pipe Pa 8253
bar 0.08
Page 4
Air only pressure drop
FANNING
Page 5
Air only pressure drop
8464.882269
0.084648823
Page 6