Professional Documents
Culture Documents
of Printed Pages : 4
Roll No ..................................
CE-305-CBGS
B.Tech., III Semester
Examination, December 2020
Choice Based Grading System (CBGS)
Strength of Materials
Time : Three Hours
Maximum Marks : 70
Note: i) Attempt any five question.
{H$Ýht nm±M àíZm| H$mo hb H$s{OE&
ii) All questions carry equal marks.
g^r àíZm| Ho$ g_mZ A§H$ h¢&
iii) In case of any doubt or dispute the English version
question should be treated as final.
{H$gr ^r àH$ma Ho$ g§Xho AWdm {ddmX H$s pñW{V ‘| A§JO
o« r ^mfm
Ho$ àíZ H$mo A§{V‘ ‘mZm Om¶oJm&
1. a) Define the following terms.
{ZåZ{b{IV H$mo n[a^m{fV H$s{OE&
i) Young’s Modulus of Elasticity
ii) Poisson’s ratio
iii) Hook’s Law Mohr’s Circle of Stress.
b) A concrete column of cross-sectional area of
350×350 mm is reinforced by four longitudinal 30mm
diameter round steel bars placed at each corner. If the
column carries comprehensive load of 400kN, determine
comprehensive stresses produced in the concrete and
steel bars. Assume that Young’s modulus of elasticity of
steel is 15 times of that concrete.
CE-305-CBGS PTO
[2]
CE-305-CBGS PTO
[4]
M σ E
gab Z_Z {gÕmÝV H$s YmaUmE± {b{IE VWm = = _|
I y R
g§~§Y ñWm{nV {H${OE&
******
CE-305-CBGS PTO