Professional Documents
Culture Documents
Updating a Workcell
From a A-O-A Backup
This document contains information proprietary to its author, or one of its affiliates, and is intended solely for the use of the individual or
entity to whom addressed and shall be maintained in confidence and not disclosed to third parties without the written consent of this
documents author. Any use, dissemination, forwarding, printing, or copying of this document is strictly prohibited. September 2013
WeldPRO Updating a Workcell With an A-O-A Backup
Creating an
A-O-A Backup
WeldPRO Updating a Workcell With an A-O-A Backup
To backup the controller files, press MENU, select File, and select File.
WeldPRO Updating a Workcell With an A-O-A Backup
To choose memory storage device, press F5-UTIL, and select 1 Set Device
WeldPRO Updating a Workcell With an A-O-A Backup
After the files have been backup, you can view a list of the
files by pressing F2-DIR, directory.
UT1: \ * . *
WeldPRO Updating a Workcell With an A-O-A Backup
Remove the USB Memory stick from the i-Pendant and insert it into
one of the USB ports on your PC.
WeldPRO Updating a Workcell With an A-O-A Backup
Updating
WeldPRO Workcell
to Match
Actual Workcell
WeldPRO Updating a Workcell With an A-O-A Backup
Choose the USB memory stick that contain you AOA backup.
Click on the file call BACKDATE.DT, and click Open.
WeldPRO Updating a Workcell With an A-O-A Backup
G:\
WeldPRO Updating a Workcell With an A-O-A Backup
The virtual robot will now boot-up. This may take several minutes.
WeldPRO Updating a Workcell With an A-O-A Backup
You have updated your WeldPRO workcell to match your Actual Workcell.
WeldPRO Updating a Workcell With an A-O-A Backup
Updating a Workcell
From a A-O-A Backup
END
This document contains information proprietary to its author, or one of its affiliates, and is intended solely for the use of the individual or
entity to whom addressed and shall be maintained in confidence and not disclosed to third parties without the written consent of this
documents author. Any use, dissemination, forwarding, printing, or copying of this document is strictly prohibited. September 2013
WeldPRO Updating a Workcell With an A-O-A Backup
Lab 5
Updating a Workcell
From a A-O-A Backup
This document contains information proprietary to its author, or one of its affiliates, and is intended solely for the use of the individual or
entity to whom addressed and shall be maintained in confidence and not disclosed to third parties without the written consent of this
documents author. Any use, dissemination, forwarding, printing, or copying of this document is strictly prohibited. September 2013
WeldPRO Updating a Workcell With an A-O-A Backup
Lab 5
Updating a Workcell
From a A-O-A Backup
END
This document contains information proprietary to its author, or one of its affiliates, and is intended solely for the use of the individual or
entity to whom addressed and shall be maintained in confidence and not disclosed to third parties without the written consent of this
documents author. Any use, dissemination, forwarding, printing, or copying of this document is strictly prohibited. September 2013