You are on page 1of 269

0 1 2 3 4 5 6 7 8 9

National Oilwell Varco Corporate Headquarters 7909 Parkwood Circle Dr. Houston, TX 77036 Phone: 1 888 262 8645 www.NOV.com/ASEPElmar

TITLE : CABIN EXTRA LONG DATASPLIT C

DRAWING No. : ES6931033757

REGULATIONS : ATEX

RISK CATEGORY : Cat 3G, IIB, T3

AREA CODE : Zone 2

DESIGN TEMPERATURE : -20°C / +40°C

MAIN SUPPLY : 115/230V 50/60Hz

G.Martina
A H.Tuytelaars M. KRAUS RELEASED
NOTE : Note. 11-01-2011

H.Tuytelaars
B M. Kleijn M. Kleijn As-Built
14-09-2011

G.Martina
C 8974 M. Kleijn M. Kleijn As-Built
Total number of pages : 269 16-09-2011

REV. ECO DRAWN CHECKED APPROVED REMARK

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Frontpage = GEN + - 1
0 1 2 3 4 5 6 7 8 9

Higher Level Assignment- / Location Designation overview


CODE Higher Level Assignment DESCRIPTION Higher Level Assignment CODE Location Designation DESCRIPTION Location Designation

=CAB Cabin +24VDC

=DSHB +BLKH Bulkhead

=GEN General +CPRK Computer Rack

=INF Information +DSHB Dashboard

=PWRP Powerpack +ECP2 ECP2 = CAB 2X115V 125A SM IFM F&G ATX 8501036545/1

+ECP4 ECP4 = CAB 24V IFM DSHB ATX 8501036015/3

+ECP6 ECP6 = CAB 2x115V 80A SUPPLIES 8501036012/1

+EJB9 EJB 220x220x120 SS ATX ASSY PWRP SUP. - ..../1 EJB9 PWRP shore connection

+EJB10 EJB 500x160x100 SS ATX ASSY INSIDE 8501036547/1 EJB10 Cabin RIG SIGNALS

+EJB11 EJB 500x160x100 SS ATX ASSY OUTSIDE 8501036547/1 EJB11 Cabin RIG SIGNALS

+EJB14 EJB 110x75x55 POLY ATX ASSY A1070273 EJB14 = Door switch

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
1 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 3

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Higher level assignment- / location designation overview = GEN + - 2
0 1 2 3 4 5 6 7 8 9

Page overview
PAGE DESIGNATION REMARKS MOD.DATE REVISOR

=GEN+/1 Frontpage 16.Sep.2011 MartinaG2

=GEN+/2 Higher level assignment- / location designation overview 16.Sep.2011 MartinaG2

=GEN+/3 Page overview 16.Sep.2011 MartinaG2

=GEN+/3.a Page overview 16.Sep.2011 MartinaG2

=GEN+/3.b Page overview 16.Sep.2011 MartinaG2

=GEN+/3.c Page overview 16.Sep.2011 MartinaG2

=GEN+/3.d Page overview 16.Sep.2011 MartinaG2

=GEN+/3.e Page overview 16.Sep.2011 MartinaG2

=GEN+/3.f Page overview 16.Sep.2011 MartinaG2

=GEN+/3.g Page overview 16.Sep.2011 MartinaG2

=CAB+/1 Frontpage 14.Jan.2011 MartinaG2

=CAB+/20 Block Diagram 25.Aug.2011 MartinaG2

=CAB+/21 Block Diagram 25.Aug.2011 MartinaG2

=CAB+/31 Connectors 24.Aug.2011 tuytelaarsh

=CAB+/32 Electric symbol overview 14.Jan.2011 MartinaG2

=CAB+/60 Slipring 24.Aug.2011 tuytelaarsh

=CAB+/61 Connection Layout EJB10 & 11 12.Aug.2011 tuytelaarsh

=CAB+/214 Reels 25.Aug.2011 tuytelaarsh

=CAB+/250 WHM System 25.Aug.2011 MartinaG2

=CAB+/1100 Terminalconnectionlist : =CAB+# 16.Sep.2011 MartinaG2

=CAB+/1400 Cable overview : 16.Sep.2011 MartinaG2

=CAB+/1401 Cable overview : 16.Sep.2011 MartinaG2

=CAB+/1402 Cable overview : 16.Sep.2011 MartinaG2

=CAB+/1403 Cable overview : 16.Sep.2011 MartinaG2

=CAB+/1404 Cable overview : 16.Sep.2011 MartinaG2

=CAB+/1405 Cable overview : 16.Sep.2011 MartinaG2

=CAB+/1406 Cable overview : 16.Sep.2011 MartinaG2

=CAB+/1407 Cable overview : 16.Sep.2011 MartinaG2

=CAB+/1408 Cable overview : 16.Sep.2011 MartinaG2

=CAB+/1500 Bill of materials electric 16.Sep.2011 MartinaG2

=CAB+/1501 Bill of materials electric 16.Sep.2011 MartinaG2

=CAB+/1502 Bill of materials electric 16.Sep.2011 MartinaG2

=CAB+/2500 Hazardous area schedule 16.Sep.2011 MartinaG2

=CAB+/2501 Hazardous area schedule 16.Sep.2011 MartinaG2

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 3.a

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Page overview = GEN + - 3
0 1 2 3 4 5 6 7 8 9

Page overview
PAGE DESIGNATION REMARKS MOD.DATE REVISOR

=CAB+/2502 Hazardous area schedule 16.Sep.2011 MartinaG2

=CAB+ECP2/1 Frontpage 11.Aug.2011 tuytelaarsh

=CAB+ECP2/30 Terminal Strips & Connectors 15.Aug.2011 tuytelaarsh

=CAB+ECP2/31 Connectors 15.Aug.2011 tuytelaarsh

=CAB+ECP2/40 Line Bushings 25.Aug.2011 tuytelaarsh

=CAB+ECP2/100 Main Supply ECP2 16.Sep.2011 MartinaG2

=CAB+ECP2/101 Main 24VDC Supply Control Circuit 25.Aug.2011 MartinaG2

=CAB+ECP2/102 Cabin & Winch Lights 16.Sep.2011 MartinaG2

=CAB+ECP2/200 Junctionbox Supply Computer system Control 16.Sep.2011 MartinaG2

=CAB+ECP2/201 Connection Layout EJB11 10.Feb.2011 MartinaG2

=CAB+ECP2/300 Safety controller EX 23.Aug.2011 tuytelaarsh

=CAB+ECP2/301 Safety controller 23.Aug.2011 tuytelaarsh

=CAB+ECP2/302 Safety controller 25.Aug.2011 MartinaG2

=CAB+ECP2/303 Safety controller 25.Aug.2011 tuytelaarsh

=CAB+ECP2/304 Safety controller 09.Jun.2011 MartinaG2

=CAB+ECP2/305 Safety controller 25.Aug.2011 MartinaG2

=CAB+ECP2/1100 Terminalconnectionlist : =CAB+ECP2#-A 16.Sep.2011 MartinaG2

=CAB+ECP2/1101 Terminalconnectionlist : =CAB+ECP2#-B 16.Sep.2011 MartinaG2

=CAB+ECP2/1102 Terminalconnectionlist : =CAB+ECP2#-C 16.Sep.2011 MartinaG2

=CAB+ECP2/1103 Terminalconnectionlist : =CAB+ECP2#-D 16.Sep.2011 MartinaG2

=CAB+ECP2/1104 Terminalconnectionlist : =CAB+ECP2#-E 16.Sep.2011 MartinaG2

=CAB+ECP2/1105 Terminalconnectionlist : =CAB+ECP2#-F 16.Sep.2011 MartinaG2

=CAB+ECP2/1106 Terminalconnectionlist : =CAB+ECP2#-G 16.Sep.2011 MartinaG2

=CAB+ECP2/1107 Terminalconnectionlist : =CAB+ECP2#-H 16.Sep.2011 MartinaG2

=CAB+ECP2/1108 Terminalconnectionlist : =CAB+ECP2#-I 16.Sep.2011 MartinaG2

=CAB+ECP2/1109 Terminalconnectionlist : =CAB+ECP2#-SPARE 16.Sep.2011 MartinaG2

=CAB+ECP2/1110 Terminalconnectionlist : =CAB+ECP2#-X21 16.Sep.2011 MartinaG2

=CAB+ECP2/1111 Terminalconnectionlist : =CAB+ECP2#-X21 16.Sep.2011 MartinaG2

=CAB+ECP2/1112 Terminalconnectionlist : =CAB+ECP2#-X22 16.Sep.2011 MartinaG2

=CAB+ECP2/1113 Terminalconnectionlist : =CAB+ECP2#-X22 16.Sep.2011 MartinaG2

=CAB+ECP2/1114 Terminalconnectionlist : =CAB+ECP2#-X22 16.Sep.2011 MartinaG2

=CAB+ECP2/1115 Terminalconnectionlist : =CAB+ECP2#-X22 16.Sep.2011 MartinaG2

=CAB+ECP2/1116 Terminalconnectionlist : =CAB+ECP2#-X22 16.Sep.2011 MartinaG2

=CAB+ECP2/1117 Terminalconnectionlist : =CAB+ECP2#-X22 16.Sep.2011 MartinaG2

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
3 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 3.b

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Page overview = GEN + - 3.a
0 1 2 3 4 5 6 7 8 9

Page overview
PAGE DESIGNATION REMARKS MOD.DATE REVISOR

=CAB+ECP2/1118 Terminalconnectionlist : =CAB+ECP2#-X24 16.Sep.2011 MartinaG2

=CAB+ECP2/1119 Terminalconnectionlist : =CAB+ECP2#-X24 16.Sep.2011 MartinaG2

=CAB+ECP2/1120 Terminalconnectionlist : =CAB+ECP2#-X26 16.Sep.2011 MartinaG2

=CAB+ECP2/1121 Terminalconnectionlist : =CAB+ECP2#-X28 16.Sep.2011 MartinaG2

=CAB+ECP2/1500 Bill of materials electric 16.Sep.2011 MartinaG2

=CAB+ECP2/1501 Bill of materials electric 16.Sep.2011 MartinaG2

=CAB+ECP2/1502 Bill of materials electric 16.Sep.2011 MartinaG2

=CAB+ECP2/2500 Hazardous area schedule 16.Sep.2011 MartinaG2

=CAB+ECP2/2501 Hazardous area schedule 16.Sep.2011 MartinaG2

=CAB+ECP2/2502 Hazardous area schedule 16.Sep.2011 MartinaG2

=CAB+ECP2/2503 Hazardous area schedule 16.Sep.2011 MartinaG2

=CAB+ECP4/1 Frontpage 11.Aug.2011 tuytelaarsh

=CAB+ECP4/30 Terminal Strips & Connectors 24.Aug.2011 tuytelaarsh

=CAB+ECP4/200 Junctionbox HES Supply 30.Aug.2011 MartinaG2

=CAB+ECP4/300 Safety controller EX 24.Aug.2011 tuytelaarsh

=CAB+ECP4/301 Safety controller 11.Aug.2011 tuytelaarsh

=CAB+ECP4/302 Safety controller 30.Aug.2011 MartinaG2

=CAB+ECP4/303 Safety controller 15.Sep.2011 MartinaG2

=CAB+ECP4/304 Safety controller 15.Aug.2011 tuytelaarsh

=CAB+ECP4/305 Safety controller 11.Feb.2011 MartinaG2

=CAB+ECP4/1100 Terminalconnectionlist : =CAB+ECP4#-X42 16.Sep.2011 MartinaG2

=CAB+ECP4/1101 Terminalconnectionlist : =CAB+ECP4#-X42 16.Sep.2011 MartinaG2

=CAB+ECP4/1102 Terminalconnectionlist : =CAB+ECP4#-X42 16.Sep.2011 MartinaG2

=CAB+ECP4/1103 Terminalconnectionlist : =CAB+ECP4#-X42 16.Sep.2011 MartinaG2

=CAB+ECP4/1104 Terminalconnectionlist : =CAB+ECP4#-X44 16.Sep.2011 MartinaG2

=CAB+ECP4/1105 Terminalconnectionlist : =CAB+ECP4#-X44 16.Sep.2011 MartinaG2

=CAB+ECP4/1106 Terminalconnectionlist : =CAB+ECP4#-X44 16.Sep.2011 MartinaG2

=CAB+ECP4/1107 Terminalconnectionlist : =CAB+ECP4#-X46 16.Sep.2011 MartinaG2

=CAB+ECP4/1500 Bill of materials electric 16.Sep.2011 MartinaG2

=CAB+ECP4/2500 Hazardous area schedule 16.Sep.2011 MartinaG2

=CAB+ECP6/1 Frontpage 24.Feb.2011 MartinaG2

=CAB+ECP6/30 Terminal Strips & Connectors 28.Jan.2011 MartinaG2

=CAB+ECP6/100 230V Supply's 15.Sep.2011 MartinaG2

=CAB+ECP6/101 115/230V Supply Wallsockets 14.Sep.2011 MartinaG2

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
3.a PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 3.c

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Page overview = GEN + - 3.b
0 1 2 3 4 5 6 7 8 9

Page overview
PAGE DESIGNATION REMARKS MOD.DATE REVISOR

=CAB+ECP6/102 115/230V Supply Computer System 14.Sep.2011 MartinaG2

=CAB+ECP6/103 Airco Supply 14.Sep.2011 MartinaG2

=CAB+ECP6/1100 Terminalconnectionlist : =CAB+ECP6#-X61 16.Sep.2011 MartinaG2

=CAB+ECP6/1101 Terminalconnectionlist : =CAB+ECP6#-X61 16.Sep.2011 MartinaG2

=CAB+ECP6/1102 Terminalconnectionlist : =CAB+ECP6#-X61 16.Sep.2011 MartinaG2

=CAB+ECP6/1500 Bill of materials electric 16.Sep.2011 MartinaG2

=CAB+ECP6/1501 Bill of materials electric 16.Sep.2011 MartinaG2

=CAB+EJB10/1 Frontpage 11.Aug.2011 tuytelaarsh

=CAB+EJB10/1100 Terminalconnectionlist : =CAB+EJB10#-X102 16.Sep.2011 MartinaG2

=CAB+EJB10/1101 Terminalconnectionlist : =CAB+EJB10#-X102 16.Sep.2011 MartinaG2

=CAB+EJB10/1500 Bill of materials electric 16.Sep.2011 MartinaG2

=CAB+EJB10/2500 Hazardous area schedule 16.Sep.2011 MartinaG2

=CAB+EJB11/1 Frontpage 11.Aug.2011 tuytelaarsh

=CAB+EJB11/1100 Terminalconnectionlist : =CAB+EJB11#-X112 16.Sep.2011 MartinaG2

=CAB+EJB11/1101 Terminalconnectionlist : =CAB+EJB11#-X112 16.Sep.2011 MartinaG2

=CAB+EJB11/1102 Terminalconnectionlist : =CAB+EJB11#-X112 16.Sep.2011 MartinaG2

=CAB+EJB11/1500 Bill of materials electric 16.Sep.2011 MartinaG2

=CAB+EJB11/2500 Hazardous area schedule 16.Sep.2011 MartinaG2

=CAB+EJB14/1 Frontpage 11.Aug.2011 tuytelaarsh

=CAB+EJB14/1100 Terminalconnectionlist : =CAB+EJB14#-X142 16.Sep.2011 MartinaG2

=CAB+EJB14/1500 Bill of materials electric 16.Sep.2011 MartinaG2

=CAB+EJB14/2500 Hazardous area schedule 16.Sep.2011 MartinaG2

=CAB+DSHB/1 Frontpage 11.Aug.2011 tuytelaarsh

=CAB+DSHB/31 Connectors 15.Aug.2011 tuytelaarsh

=CAB+DSHB/210 Operator Panel 13.Sep.2011 MartinaG2

=CAB+DSHB/1500 Bill of materials electric 16.Sep.2011 MartinaG2

=CAB+DSHB/1501 Bill of materials electric 16.Sep.2011 MartinaG2

=CAB+DSHB/2500 Hazardous area schedule 16.Sep.2011 MartinaG2

=CAB+DSHB/2501 Hazardous area schedule 16.Sep.2011 MartinaG2

=CAB+CPRK/1 Frontpage 11.Aug.2011 tuytelaarsh

=CAB+CPRK/31 Connectors 24.Aug.2011 tuytelaarsh

=CAB+CPRK/1500 Bill of materials electric 16.Sep.2011 MartinaG2

=CAB+BLKH/1 Frontpage 11.Aug.2011 tuytelaarsh

=CAB+BLKH/31 Connectors 14.Sep.2011 tuytelaarsh

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
3.b PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 3.d

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Page overview = GEN + - 3.c
0 1 2 3 4 5 6 7 8 9

Page overview
PAGE DESIGNATION REMARKS MOD.DATE REVISOR

=CAB+BLKH/200 Connectors Bulkhead 15.Sep.2011 tuytelaarsh

=CAB+BLKH/1500 Bill of materials electric 16.Sep.2011 MartinaG2

=CAB+BLKH/2500 Hazardous area schedule 16.Sep.2011 MartinaG2

=INF+/2600 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2601 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2602 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2603 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2604 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2605 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2606 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2607 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2608 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2609 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2610 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2611 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2612 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2613 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2614 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2615 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2616 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2617 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2618 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2619 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2620 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2621 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2622 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2623 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2624 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2625 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2626 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2627 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2628 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2629 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2630 Electrical inspection sheet 16.Sep.2011 MartinaG2

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
3.c PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 3.e

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Page overview = GEN + - 3.d
0 1 2 3 4 5 6 7 8 9

Page overview
PAGE DESIGNATION REMARKS MOD.DATE REVISOR

=INF+/2631 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2632 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2633 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2634 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2635 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2636 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2637 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2638 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2639 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2640 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2641 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2642 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2643 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2644 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2645 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2646 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2647 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2648 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2649 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2650 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2651 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2652 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2653 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2654 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2655 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2656 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2657 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2658 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2659 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2660 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2661 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2662 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2663 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2664 Electrical inspection sheet 16.Sep.2011 MartinaG2

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
3.d PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 3.f

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Page overview = GEN + - 3.e
0 1 2 3 4 5 6 7 8 9

Page overview
PAGE DESIGNATION REMARKS MOD.DATE REVISOR

=INF+/2665 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2666 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2667 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2668 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2669 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2670 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2671 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2672 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2673 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2674 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2675 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2676 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2677 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2678 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2679 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2680 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2681 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2682 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2683 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2684 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2685 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2686 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2687 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2688 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2689 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2690 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2691 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2692 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2693 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2694 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2695 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2696 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2697 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2698 Electrical inspection sheet 16.Sep.2011 MartinaG2

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
3.e PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 3.g

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Page overview = GEN + - 3.f
0 1 2 3 4 5 6 7 8 9

Page overview
PAGE DESIGNATION REMARKS MOD.DATE REVISOR

=INF+/2699 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2700 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2701 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2702 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2703 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2704 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2705 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2706 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2707 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2708 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2709 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2710 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2711 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2712 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2713 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2714 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2715 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2716 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2717 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2718 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2719 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2720 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2721 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2722 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2723 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2724 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2725 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2726 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2727 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2728 Electrical inspection sheet 16.Sep.2011 MartinaG2

=INF+/2729 Electrical inspection sheet 16.Sep.2011 MartinaG2

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
3.f PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE =CAB/1

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Page overview = GEN + - 3.g
0 1 2 3 4 5 6 7 8 9

Energieweg 26, 2964 LE, Groot-Ammers, The Netherlands, (t) +31 184 608 700, (f) +31 184 608 790

Cabin

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
=GEN/3.g PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 20

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 14.Jan.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Frontpage = CAB + - 1
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

+ECP2

Cabin Juctionbox ECP2

X21 X22 X21 X21 X21 X22 X22 X22 X22 X22 X22 X22 X28 X28 X22

W50 W51 W52 W53 W69 W70 W71 W72 W73 W136 W135 W100 W101 W102 W103 W105 W106 W107 W108 W109 W110 W111
RADOX RADOX RADOX Radox RADOX RADOX RADOX RADOX RADOX RADOX RADOX RADOX RADOX RADOX RADOX RADOX RADOX RADOX RADOX RADOX RADOX RADOX
4x25 mm² 5x2,5 mm² 18x1,5 mm² 5x25 mm² 3x1,5 mm² 5x2,5 mm² 5x2,5 mm² 3x2,5 mm² 7x2,5 mm² 4x10 mm² 5x1,5 mm² 3x1 mm² 3x1 mm² 3x1 mm² 3x1 mm² 3x1 mm² 3x1 mm² 3x1 mm² 3x1 mm² 3x1 mm² 3x1 mm² 25x1,5 mm²
+ECP2/100.0 +ECP2/101.2 +ECP2/101.3 +ECP6/100.0 +ECP2/101.0 +ECP2/102.0 +ECP2/102.1 +ECP2/102.2 +ECP2/102.3 +ECP6/103.0 +ECP2/200.7 +ECP2/301.1 +ECP2/301.2 +ECP2/301.4 +ECP2/301.8 +ECP2/302.0 +ECP2/302.1 +ECP2/302.2 +ECP2/302.6 +ECP2/302.7 +ECP2/305.5 +ECP2/101.5
+ECP2/102.8 +ECP2/200.0
+ECP2/300.5 +ECP2/200.6
+EJB14 +ECP2/200.8
X142 X142 X142 +ECP2/300.6
Blue Blue Blue Blue
W104 W137 Marking Marking Marking Marking
Molded-b4 Molded-b4
4x1,5 mm² 4x1,5 mm²
+ECP2/301.8 +ECP2/301.9

M P
G
2+PE
+ECP4/305.1

-102S0 -102S1 -104M2 -301S2 -301S8 -301S9 -302B1 -302S6 Horn


M Gas Low -305Z5
Cabin light Cabin light SCREEN
Sensor
Door Door
Pressure
Manual SOUNDER -305Z1
WIPER
1~ Switch 1
+ECP2/102.0
Switch 2
+ECP2/102.1
+ECP2/200.6 Air Inlet
Switch
Left
Switch
Right
+ECP2/302.1 Call
Point
+ECP2/305.5

G +ECP2/301.2
+ECP2/301.8 +ECP2/301.9
P P +ECP2/302.6
-102H3
-101M0 Dashboard Light
Pressurising +ECP2/102.3 -301S1 -301S4 -302B0 -302B2 -302S7
Fan Gas Smoke Low Air Flow
+ECP2/101.0 Emergency
Sensor Sensor Pressure +ECP2/302.2
Stop W99
-102H2 Cabin +ECP2/301.4 +ECP2/302.0
Cabin RADOX
+ECP2/301.1
Cabin light +ECP2/302.7
+ECP2/102.2
8 meter
3x1 mm²
+ECP4/305.1

+ECP6 +ECP4
X61 X61
X42 X44 X42
Cabin Juctionbox ECP4
Cabin Juctionbox ECP6 (Non Zone)
X42 X44
X61 X61 X61 X61 X61 X61 X61 X61 X61 X61 X61

W54 W55 W56 W57 W58 W59 W60 W61 W74 W76 W78 W80 W62 W63 W64 W65 W66 W67 W68 W82 W83 W84 W36 W85 W86 W87 W88 W89 W90 W91 W92 W93 W94 W95 W96 W97 W98
CC600 CC600 CC600 CC600 CC600 CC600 CC600 CC600 RADOX RADOX RADOX RADOX CC600 CC600 CC600 CC600 CC600 CC600 CC600 CC600 CC600 SCB628 Molded-b4 RADOX RADOX Molded-b4 Molded-b4 Molded-b4 Molded-b4 Molded-b4 Molded-b4 Molded-b4 Molded-b4 Molded-b4 Molded-b4 RADOX RADOX
3x2,5 mm² 3x2,5 mm² 3x2,5 mm² 3x2,5 mm² 3x2,5 mm² 3x2,5 mm² 3x2,5 mm² 3x2,5 mm² 3x2,5 mm² 3x2,5 mm² 3x2,5 mm² +ECP6/103.6 3x2,5 mm² 7 meter 7 meter 7 meter 7 meter 7 meter 7 meter 7 meter 7 meter 7 meter 2x2x0,25 mm² 4x1,5 mm² 3x1 mm² 7x1 mm² 4x1,5 mm² 4x1,5 mm² 4x1,5 mm² 4x1,5 mm² 4x1,5 mm² 4x1,5 mm² 4x1,5 mm² 4x1,5 mm² 4x1,5 mm² 4x1,5 mm² 7x1 mm² 7x1 mm²
+ECP6/100.7 +ECP6/101.1 +ECP6/101.2 +ECP6/101.3 +ECP6/101.4 +ECP6/101.5 +ECP6/101.6 +ECP6/101.7 +ECP6/103.2 +ECP6/103.4 +ECP6/103.6 Thermostat +ECP6/103.8 3x6 mm² 3x6 mm² 3x6 mm² 3x10 mm² 3x6 mm² 3x6 mm² 3x6 mm² 3x2,5 mm² 3x2,5 mm² +ECP4/300.5 +ECP4/200.8 +ECP4/301.5 +ECP4/301.6 +ECP4/302.1 +ECP4/302.2 +ECP4/302.3 +ECP4/302.6 +ECP4/302.7 +ECP4/302.8 +ECP4/303.5 +ECP4/303.7 +ECP4/304.1 +ECP4/304.3 +ECP4/304.5 +ECP4/304.7
-103U6.1 +ECP6/102.2 +ECP6/102.3 +ECP6/102.4 +ECP6/102.5 +ECP6/102.6 +ECP6/102.7 +ECP6/102.8 +ECP2/200.2 +ECP2/200.4 +ECP4/300.5 +ECP4/303.6 +ECP4/303.8 +ECP4/304.4

1/N/PE 1/N/PE 1/N/PE 1/N/PE

-100X7 -101X2 W78.1


-101X4 -101X6 RADOX
+ECP6/100.7 (101F1) (101F4) (101F4)
+ECP6/101.2 +ECP6/101.4 +ECP6/101.6
5x2,5 mm² S1
+ECP6/103.6
S2
-102U3 -102U5 -102U7 -200U2
+ECP6/102.3 +ECP6/102.5 +ECP6/102.7 12VDC -301R5 -302S1 -302S3 -302S7 -303S4 -304S1 -304J5
1/N/PE 1/N/PE 1/N/PE 1/N/PE Line Autospooling Horn Emergency +ECP4/303.5 Brake Levelwind
Supply
+ECP4/302.3 +ECP4/304.5
W75 W79 Shooting Panel Tension
+ECP4/301.5
Off / On
+ECP4/302.1
Stop Control
+ECP4/304.1
-101X1 -101X3 -101X5 -101X7 RADOX RADOX +ECP2/200.2 Dashboard
+ECP4/302.7
(101F1) 5x2,5 mm² 5x2,5 mm² 2 S1
-100A7 +ECP6/101.1
(101F1)
+ECP6/101.3
(101F4)
+ECP6/101.5
Depth Panel
+ECP6/103.3 +ECP6/103.7
+ECP6/100.7 (101F4) S2
+ECP6/101.7 -102U2 -102U4 -102U6 -102U8 -200U4
+ECP6/102.2 +ECP6/102.4 +ECP6/102.6 +ECP6/102.8 12VDC
-300P4 -200S8 -301J6 -302S2 -302S6 -302S8 -303S7 -304S2
Supply +ECP4/302.8
+ECP4/300.4 Windscreen Winch Wirespray Stop SPEED Throttle
WHM
+ECP2/200.4 Wiper Speed Off / On Engine Low / Medium / High Up / Down
+ECP4/200.8 +ECP4/301.6 +ECP4/302.2 +ECP4/302.6 +ECP4/303.7 +ECP4/304.3

-103U2 -103U4 -103U6 -103U8 COMPUTER RACK Dashboard


Cabin airco 1 Cabin airco 2 Cabin airco 3 Cabin airco 4
+ECP6/103.2 +ECP6/103.4 +ECP6/103.6 +ECP6/103.8
+CPRK

+ECP2/100.0
PLG1

-SKT1
+ECP2/100.0

WR
RADOX
4x25 mm²
+ECP2/100.0

-100U0
+ECP2/100.0
+ECP2/101.2 +ECP2/300.5
-SKT6 -PLG2

1 THIS DRAWING IS OUR PROPERTY AND IS CONFIDENTIAL. IT IS NOT ALLOWED TO COPY OR TO SHOW TO THIRD PARTIES WITHOUT OUR WRITTEN PERMISSION. 21
Scale 1: 1 Electric Hydraulic HIGHER LEVEL LOCATION PAGE:
TYPE OF UNIT : DATASPLIT C ZONE2 AIRSTART Block Diagram ASSIGNMENT: DESIGNATION:
ENGINEER CABIN EXTRA L ES6931033757

AS-BUILT

PAGE MOD 25.Aug.2011


Energieweg 26, 2964 LE, Groot-Ammers, The Netherlands
(t) +31 184 608 700, (f) +31 184 608 790 PROJECTNUMBER: NLOA10526 = CAB + - 20
0 1 2 3 4 5 6 7 8 9 10 11 12 13

+ECP2
CABIN

Cabin Juctionbox ECP2


X22 X21 X22 X22 X22

+EJB10
W112 W113 W114 W115 W116
RADOX RADOX RADOX RADOX RADOX +CPRK /214.3
25x1,5 mm²
+ECP2/201.0
Cabin Juctionbox EJB10 5x2,5 mm²
+ECP2/102.5
12x1,5 mm²
+ECP2/101.7
6 meter
5x2,5 mm²
8 meter
3x2,5 mm²
214U3
+ECP2/200.9 +ECP2/101.7 +ECP2/101.9
X102 X102 X102 X102 X102 X102 +ECP2/300.9
SP
/214.3

W40 W41 W42 W43 W44 W45


RADOX RADOX RADOX RADOX RADOX COAX
-101A8 W119
6 meter 6 meter 6 meter 6 meter 6 meter 6 meter Intercom CC600
+ECP2/101.7
5x1,5 mm² 12x1,5 mm² 12x1,5 mm² 5x1,5 mm² 12x1,5 mm² 1x1,5 mm² 3x2,5 mm²
/61.0 /61.1 /61.3 /61.5 /61.6 /61.8 /214.3
/61.8 +ECP2/101.9 /214.3
+EJB11 /61.8 SKT57 SKT59
+ECP4

X42 X42 X112 X112 X112 X112 X112 X112 X112


+BLKH +BLKH
Cabin Juctionbox EJB11 BULKHEAD BULKHEAD

W232 W120 +BLKH/200.2 +BLKH/200.2


Molded-a3 RADOX SKT57a SKT59a
3x1,5 mm² 2x1,5 mm²
+DSHB/210.8 +DSHB/210.0

+DSHB +DSHB/210.0 PLG57 PLG59 PLG60


J1 +DSHB/210.7 /214.3 /214.6

WRL
RADOX
+DSHB/210.8 +DSHB/210.0
Kerr Backup OPERATOR 3x1 mm²
+DSHB/210.7
Display PANEL
-210U8 -210U0

-PE1 -PE1
/214.1 PE /214.1 PE
P33 J2 J3 J5 J4
+DSHB/210.9 +DSHB/210.5 +DSHB/210.0 +DSHB/210.2

+CPRK
W233 W208 W206 W207 W209 /60.1
RADOX RADOX RADOX RADOX RADOX Computer Rack W181 W183 W186 W188
/250.6
7x1 mm² 7x1 mm² 6x0,5 mm² 6x0,5 mm² 3.2 meter -60U1 GEXOL GEXOL GEXOL GEXOL
+DSHB/210.9 +DSHB/210.4 +DSHB/210.0 +DSHB/210.2 10x0,5 mm² -250A6 1x8 AWG 1x8 AWG 1x8 AWG 1x8 AWG
/214.1 /214.3 /214.5 /214.6
+DSHB/210.5

+CPRK -210W7 -214W1 -214W3 -214W5 -214W6


+DSHB/210.7 reel empty reel empty reel empty reel empty
/214.0 /214.3 /214.5 /214.6

250U3
POTENTIAL
MONITOR
/250.2 W180 W182 W184 W187 W189
RADOX GEXOL GEXOL GEXOL GEXOL
3x1 mm² 75 meter 75 meter 75 meter 75 meter
+DSHB/210.7 1x8 AWG 1x8 AWG 1x8 AWG 1x8 AWG
W825 W826 W827 /214.1 /214.3 /214.5 /214.6
RADOX RADOX Coax
8 meter 8 meter 8 meter
5x1,5 mm² 3x1,5 mm² 1x0,5 mm²
/250.2 /250.4 /250.6

+DSHB/210.9 +DSHB/210.4 +DSHB/210.0 +DSHB/210.2 +DSHB/210.5 PE PE


SKT53 SKT50 SKT51 SKT52 SKT56 W118 /250.2 /250.4
SABIX-SLPRNG -SKT62 -SKT61
7x1 mm²
+BLKH

/60.1

+BLKH -210Z7 -214U0 -214U3.1 -214U5 -214U6


/60.1 BULKHEAD +BLKH/200.0 +BLKH/200.2
+BLKH/200.0 +BLKH/200.4 +BLKH/200.4 +BLKH/200.2 +BLKH/200.0
SKT71
+ECP2/102.5 +ECP2/300.9
-SKT62a -SKT61a Intercom Speaker EARTHRAIL SP/DLL LOADCELL SP/DLL
SKT53a SKT50a SKT51a SKT52a SKT56a SKT4 SKT3 +DSHB/210.7 /214.0 /214.3 /214.5 /214.6

20 THIS DRAWING IS OUR PROPERTY AND IS CONFIDENTIAL. IT IS NOT ALLOWED TO COPY OR TO SHOW TO THIRD PARTIES WITHOUT OUR WRITTEN PERMISSION. 31
Scale 1: 1 Electric Hydraulic HIGHER LEVEL LOCATION PAGE:
TYPE OF UNIT : DATASPLIT C ZONE2 AIRSTART Block Diagram ASSIGNMENT: DESIGNATION:
ENGINEER CABIN EXTRA L ES6931033757

AS-BUILT

PAGE MOD 25.Aug.2011


Energieweg 26, 2964 LE, Groot-Ammers, The Netherlands
(t) +31 184 608 700, (f) +31 184 608 790 PROJECTNUMBER: NLOA10526 = CAB + - 21
0 1 2 3 4 5 6 7 8 9

CONNECTORS

=CAB-PLG1 = PLG1 Main Power Supply Shore 2x 110v 60Hz 125A


=CAB-PLG2 = PLG2 Signals from Powerpack
=CAB-SKT3 = SKT3 Supply Winch
=CAB-SKT4 = SKT4 Winch Lights
=CAB-SKT6 = SKT6 Auxiliary Cabin 24VDC Supply
=CAB-SKT50 = SKT50 Cabin Loadcell
=CAB-SKT51 = SKT51 Cabin Encoder 2
=CAB-SKT52 = SKT52 Cabin Encoder 2
=CAB-SKT53 = SKT53 Cabin Encoder 3
=CAB-SKT56 = SKT56 Cabin Mark Detector
=CAB-PLG57 = PLG57 Cabin Intercom 1
=CAB-SKT57 = SKT57 Cabin Intercom 1
=CAB-PLG59 = PLG59 Cabin SP (SP/DLL)
=CAB-SKT59 = SKT59 Cabin SP (SP/DLL)
=CAB-PLG60 = PLG60 Cabin SP (SP/DLL)
=CAB-SKT71 = SKT71 Cabin Slipring 1

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
21 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 32

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 24.Aug.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Connectors = CAB + - 31
0 1 2 3 4 5 6 7 8 9

ELECTRIC SYMBOL OVERVIEW


SYMBOL DESCRIPTION SYMBOL DESCRIPTION SYMBOL DESCRIPTION

+ -
TERMINAL PROXIMITY SWITCH VALVE

CONNECTOR BATTERY CAPACITOR

SOCKET G GENERATOR INDUCTIVITY

PLUG TRANSFORMER RESISTOR

COIL (FOR CONTACTOR) CONVERTER / RECTIFIER DIODE (SEMICONDUCTOR)

NORMALY OPEN CONTACT SIGNAL LAMP EARTH / GROUND

NORMALY CLOSED CONTACT ACOUSTIC SIGNAL DEVICE (HORN)

CHANGE-OVER CONTACT MEASURING INSTRUMENT

M
SAFETY FUSE MOTOR
1~

CIRCUITBREAKER LIGHT

MOTOR-OVERLOAD SWITCH HEATING


I> I> I>

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
31 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 60

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 14.Jan.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electric symbol overview = CAB + - 32
0 1 2 3 4 5 6 7 8 9

+CPRK
-60U1
/21.4
COMPUTER RACK

W118 1 2 3 4 5 6 ye/gn
/21.4

/21.4
/60.1
A1101335
=CAB 1 2 3 4 5 6 7 8 9 ... 19
SKT71

Connections to:
WNCH page 60

Slipring

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
32 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 61

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 24.Aug.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Slipring = CAB + - 60
0 1 2 3 4 5 6 7 8 9

+EJB10
10xM25 & 6xM20
A1060082

X102 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48

10

11

12

10

11

12
W40 1 2 3 4 5 W41 1 2 3 4 5 6 W42 1 2 3 4 5 6 7 8 W43 1 2 3 4 5 W44 1 2 3 4 5 6 7 8 9 10 11 12 W45 -
7

9
/21.4 /21.4 /21.5 /21.5 /21.6 /21.6

X112 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48

+EJB11
10xM25 & 6xM20
A1060082

Phone Rig Floor Ethernet Intercom Spare Coax


Display

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
60 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 214

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 12.Aug.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Connection Layout EJB10 & 11 = CAB + - 61
0 1 2 3 4 5 6 7 8 9

+CPRK
Computerrack
/21.12
214U3

SP

W119 1 2 GN/YE
/21.12

/21.12
/214.3
A1058159
A1102238
=CAB
A B C
SKT59

+BLKH/200.2
+BLKH /21.12
+BLKH/200.2
SP/DLL
SKT59a A B C

PLG59 B C PLG60 B C
=CAB A =CAB A
A1058172 A1058172
A1082717 A1082717
/214.3
/214.6

PE1 PE1

W181 BK W186 BK W188 BK


/21.11 W183 BK /21.12 /21.13
/21.12

-214W1 -214W3 -214W5 -214W6


reel empty reel empty reel empty reel empty
A0016294 A0016294 A1060276 A1027372
/21.11 /21.12 /21.12 /21.13

W182 BK W184 BK W187 BK W189 BK


/21.11 /21.12 /21.13 /21.13

PE PE PE
-SP

-214U0 -214U3.1 -214U5 -214U6


A0017613 electrode A0017613 A0017613
/21.11 A0017611 /21.12 /21.13
/21.12

SP/DLL LOADCELL SP/DLL


EARTHRAIL

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
61 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 250

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 25.Aug.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Reels = CAB + - 214
0 1 2 3 4 5 6 7 8 9

+CPRK
Computerrack
Cabin

-250U3
=CAB+ Alarm 12VDC POTENTIAL
MONITOR
/250.2

- +

W825 1 2 3 4 5 W826 1 2 3 W827 -


/21.9 /21.9 /21.10

/21.9
A1082718 /21.9
A1068683 A1082717
Wellhead A1068682
Monitor A B C D E Green Light A B C
SKT62 SKT61

+BLKH/200.0

+BLKH/200.2
+BLKH/200.0
Wellhead +BLKH/200.2
Monitor Green Light
SKT62a A B C D E SKT61a A B C

-250A6
Connections to: Connections to: Antenna
A1041099
WNCH+ECP20 WNCH+ECP20 /21.10
page 250 page 250 Note: Coax cable maximum lenght is 18 ft

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
214 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 1100

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 25.Aug.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : WHM System = CAB + - 250
0 1 2 3 4 5 6 7 8 9

Terminal connectionlist

=CAB-W825

CABLE NAME

CABLE NAME
=CAB+

RADOX 5x1,5 mm²

CABLETYPE

CONNECTION

TERMINAL

CONNECTION

CABLETYPE
FUNCTION CODE EXTERN CODE INTERN PAGE / COLOMN

3 =CAB+-SKT62 C =CAB/250.2

4 =CAB+-SKT62 D =CAB/250.2

5 =CAB+-SKT62 E =CAB/250.3

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
250 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 1400

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Terminalconnectionlist : =CAB+# = CAB + - 1100
0 1 2 3 4 5 6 7 8 9

Cable overview
CORE TO CORE
CABLE CODE FROM TO CABLE TYPE CORES LENGTH A. NUMBER TEST VOLT. VALUE SIGN.
REEL #
=CAB+ECP4-X42 =CAB+DSHB-200S8
=CAB-W36 Molded-b4 4x1,5 mm² A1040277
TERMINAL STRIP X42 JUNCTION BOX ECP4 Windscreen Wiper

=CAB+ECP4-X44

TERMINAL STRIP X44 JUNCTION BOX ECP4

=CAB+EJB10-X102 =CAB+EJB11-X112
=CAB-W40 RADOX 5x1,5 mm² 6 meter A1049158
TERMINAL STRIP X102 JUNCTION BOX EJB10 TERMINAL STRIP X112 JUNCTION BOX EJB11

=CAB+EJB10-X102 =CAB+EJB11-X112
=CAB-W41 RADOX 12x1,5 mm² 6 meter A1064044
TERMINAL STRIP X102 JUNCTION BOX EJB10 TERMINAL STRIP X112 JUNCTION BOX EJB11

=CAB+EJB10-X102 =CAB+EJB11-X112
=CAB-W42 RADOX 12x1,5 mm² 6 meter A1064044
TERMINAL STRIP X102 JUNCTION BOX EJB10 TERMINAL STRIP X112 JUNCTION BOX EJB11

=CAB+EJB10-X102 =CAB+EJB11-X112
=CAB-W43 RADOX 5x1,5 mm² 6 meter A1049158
TERMINAL STRIP X102 JUNCTION BOX EJB10 TERMINAL STRIP X112 JUNCTION BOX EJB11

=CAB+EJB10-X102 =CAB+EJB11-X112
=CAB-W44 RADOX 12x1,5 mm² 6 meter A1064044
TERMINAL STRIP X102 JUNCTION BOX EJB10 TERMINAL STRIP X112 JUNCTION BOX EJB11

=CAB+EJB10-X102
=CAB-W45 COAX 1x1,5 mm² 6 meter A0018386
TERMINAL STRIP X102 JUNCTION BOX EJB10

=CAB+EJB11-X112

TERMINAL STRIP X112 JUNCTION BOX EJB11

=CAB+ECP2-X21 =CAB+-PLG1
=CAB-W50 RADOX 4x25 mm² A1055972
TERMINAL STRIP X21 CONTROL PANEL JB2 (230VAC) PLUG

=CAB+ECP2-X22 =CAB+-SKT6
=CAB-W51 RADOX 5x2,5 mm² A1055970
Pressurising Fan Pressurising Fan

=CAB+-PLG2 =CAB+ECP2-X22
=CAB-W52 RADOX 18x1,5 mm² A1049120
0VDC GROUND ANALOGUE OUTPUTS TERMINAL STRIP X22 CONTROL PANEL JB2 (24VDC)

=CAB+ECP2-X21

Dashboard Light

=CAB+ECP2-X21 =CAB+ECP6-X61
=CAB-W53 Radox 5x25 mm² A1055972
TERMINAL STRIP X21 CONTROL PANEL JB2 (230VAC) TERMINAL STRIP X61 JUNCTION BOX ECP6

=CAB+ECP6-X61 =CAB+-100X7
=CAB-W54 CC600 3x2,5 mm² A1037830
TERMINAL STRIP X61 JUNCTION BOX ECP6

=CAB+ECP6-X61 =CAB+-101X1
=CAB-W55 CC600 3x2,5 mm² A1037830
TERMINAL STRIP X61 JUNCTION BOX ECP6 (101F1)

Unit serial no.


THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
1100 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 1401

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Cable overview : =CAB#-W36 < = > =CAB#-W55 = CAB + - 1400
0 1 2 3 4 5 6 7 8 9

Cable overview
CORE TO CORE
CABLE CODE FROM TO CABLE TYPE CORES LENGTH A. NUMBER TEST VOLT. VALUE SIGN.
REEL #
=CAB+ECP6-X61 =CAB+-101X2
=CAB-W56 CC600 3x2,5 mm² A1037830
TERMINAL STRIP X61 JUNCTION BOX ECP6 (101F1)

=CAB+ECP6-X61 =CAB+-101X3
=CAB-W57 CC600 3x2,5 mm² A1037830
TERMINAL STRIP X61 JUNCTION BOX ECP6 (101F1)

=CAB+ECP6-X61 =CAB+-101X4
=CAB-W58 CC600 3x2,5 mm² A1037830
TERMINAL STRIP X61 JUNCTION BOX ECP6 (101F4)

=CAB+ECP6-X61 =CAB+-101X5
=CAB-W59 CC600 3x2,5 mm² A1037830
TERMINAL STRIP X61 JUNCTION BOX ECP6 (101F4)

=CAB+ECP6-X61 =CAB+-101X6
=CAB-W60 CC600 3x2,5 mm² A1037830
TERMINAL STRIP X61 JUNCTION BOX ECP6 (101F4)

=CAB+ECP6-X61 =CAB+-101X7
=CAB-W61 CC600 3x2,5 mm² A1037830
TERMINAL STRIP X61 JUNCTION BOX ECP6 Depth Panel (101F4)

=CAB+ECP6-X61 =CAB+CPRK-102U2
=CAB-W62 CC600 3x6 mm² 7 meter A1040099
TERMINAL STRIP X61 JUNCTION BOX ECP6

=CAB+ECP6-102F2

=CAB+ECP6-X61 =CAB+CPRK-102U3
=CAB-W63 CC600 3x6 mm² 7 meter A1040099
TERMINAL STRIP X61 JUNCTION BOX ECP6

=CAB+ECP6-102F3

=CAB+ECP6-X61 =CAB+CPRK-102U4
=CAB-W64 CC600 3x6 mm² 7 meter A1040099
TERMINAL STRIP X61 JUNCTION BOX ECP6

=CAB+ECP6-102F4

=CAB+ECP6-X61 =CAB+CPRK-102U5
=CAB-W65 CC600 3x10 mm² 7 meter A1038348
TERMINAL STRIP X61 JUNCTION BOX ECP6

=CAB+ECP6-102F5

=CAB+ECP6-X61 =CAB+CPRK-102U6
=CAB-W66 CC600 3x6 mm² 7 meter A1040099
TERMINAL STRIP X61 JUNCTION BOX ECP6

=CAB+ECP6-102F6

Unit serial no.


THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
1400 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 1402

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Cable overview : =CAB#-W56 < = > =CAB#-W66 = CAB + - 1401
0 1 2 3 4 5 6 7 8 9

Cable overview
CORE TO CORE
CABLE CODE FROM TO CABLE TYPE CORES LENGTH A. NUMBER TEST VOLT. VALUE SIGN.
REEL #
=CAB+ECP6-X61 =CAB+CPRK-102U7
=CAB-W67 CC600 3x6 mm² 7 meter A1040099
TERMINAL STRIP X61 JUNCTION BOX ECP6

=CAB+ECP6-102F7

=CAB+ECP6-X61 =CAB+CPRK-102U8
=CAB-W68 CC600 3x6 mm² 7 meter A1040099
TERMINAL STRIP X61 JUNCTION BOX ECP6

=CAB+ECP6-102F8

=CAB+ECP2-X21 =CAB+-101M0
=CAB-W69 RADOX 3x1,5 mm² A1082865
TERMINAL STRIP X21 CONTROL PANEL JB2 (230VAC) Pressurising Fan

=CAB+ECP2-X21 =CAB+-102S0
=CAB-W70 RADOX 5x2,5 mm² A1055970
TERMINAL STRIP X21 CONTROL PANEL JB2 (230VAC) Cabin light Switch 1

=CAB+ECP2-X21 =CAB+-102S1
=CAB-W71 RADOX 5x2,5 mm² A1055970
TERMINAL STRIP X21 CONTROL PANEL JB2 (230VAC) Cabin light Switch 2

=CAB+ECP2-X21 =CAB+-102H2
=CAB-W72 RADOX 3x2,5 mm² A1049117
TERMINAL STRIP X21 CONTROL PANEL JB2 (230VAC) Cabin light

=CAB+ECP2-X21 =CAB+-102H3
=CAB-W73 RADOX 7x2,5 mm² A1073579
TERMINAL STRIP X21 CONTROL PANEL JB2 (230VAC) Dashboard Light

=CAB+ECP6-X61 =CAB+-103U2
=CAB-W74 RADOX 3x2,5 mm² A1049117
TERMINAL STRIP X61 JUNCTION BOX ECP6 Cabin airco 1

=CAB+-103U2 =CAB+-103U4
=CAB-W75 RADOX 5x2,5 mm² A1055970
Cabin airco 1 Cabin airco 2

=CAB+ECP6-X61 =CAB+-103U4
=CAB-W76 RADOX 3x2,5 mm² A1049117
TERMINAL STRIP X61 JUNCTION BOX ECP6 Cabin airco 2

=CAB+ECP6-X61 =CAB+-103U6
=CAB-W78 RADOX 3x2,5 mm² A1049117
TERMINAL STRIP X61 JUNCTION BOX ECP6 Cabin airco 3

=CAB+-103U6.1 =CAB+-103U6
=CAB-W78.1 RADOX 5x2,5 mm² A1055970
Thermostat Cabin airco 3

=CAB+-103U6 =CAB+-103U8
=CAB-W79 RADOX 5x2,5 mm² A1055970
Cabin airco 3 Cabin airco 4

=CAB+ECP6-X61 =CAB+-103U8
=CAB-W80 RADOX 3x2,5 mm² A1049117
TERMINAL STRIP X61 JUNCTION BOX ECP6 Cabin airco 4

Unit serial no.


THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
1401 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 1403

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Cable overview : =CAB#-W67 < = > =CAB#-W80 = CAB + - 1402
0 1 2 3 4 5 6 7 8 9

Cable overview
CORE TO CORE
CABLE CODE FROM TO CABLE TYPE CORES LENGTH A. NUMBER TEST VOLT. VALUE SIGN.
REEL #
=CAB+ECP2-X22 =CAB+CPRK-200U2
=CAB-W82 CC600 3x2,5 mm² 7 meter A1037830
TERMINAL STRIP X22 CONTROL PANEL JB2 (24VDC) 12VDC Supply Shooting Panel

=CAB+ECP2-X26

TERMINAL STRIP X26 CONTROL PANEL JB2

=CAB+ECP2-X22 =CAB+CPRK-200U4
=CAB-W83 CC600 3x2,5 mm² 7 meter A1037830
TERMINAL STRIP X22 CONTROL PANEL JB2 (24VDC) 12VDC Supply WHM

=CAB+ECP2-X26

TERMINAL STRIP X26 CONTROL PANEL JB2

=CAB+ECP4-X42 =CAB+DSHB-PLGA
=CAB-W84 SCB628 2x2x0,25 mm² A1037839
0VDC GROUND ANALOGUE OUTPUTS 0VDC GROUND ANALOGUE OUTPUTS

=CAB+ECP4-X44 =CAB+DSHB-300P4

TERMINAL STRIP X44 JUNCTION BOX ECP4

=CAB+ECP4-X42 =CAB+DSHB-301R5
=CAB-W85 RADOX 3x1 mm² A1049118
Line Tension Line Tension

=CAB+ECP4-X44

TERMINAL STRIP X44 JUNCTION BOX ECP4

=CAB+ECP4-X42 =CAB+DSHB-301J6
=CAB-W86 RADOX 7x1 mm² A1049155
Winch Speed Winch Speed

=CAB+ECP4-X44

TERMINAL STRIP X44 JUNCTION BOX ECP4

=CAB+ECP4-X42 =CAB+DSHB-302S1
=CAB-W87 Molded-b4 4x1,5 mm² A1040277
Autospooling Off / On Autospooling Off / On

=CAB+ECP4-X44

TERMINAL STRIP X44 JUNCTION BOX ECP4

=CAB+ECP4-X42 =CAB+DSHB-302S2
=CAB-W88 Molded-b4 4x1,5 mm² A1040277
Wirespray Off / On Wirespray Off / On

=CAB+ECP4-X44

TERMINAL STRIP X44 JUNCTION BOX ECP4

=CAB+ECP4-X42 =CAB+DSHB-302S3
=CAB-W89 Molded-b4 4x1,5 mm² A1040277
Horn Horn

=CAB+ECP4-X44

TERMINAL STRIP X44 JUNCTION BOX ECP4

Unit serial no.


THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
1402 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 1404

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Cable overview : =CAB#-W82 < = > =CAB#-W89 = CAB + - 1403
0 1 2 3 4 5 6 7 8 9

Cable overview
CORE TO CORE
CABLE CODE FROM TO CABLE TYPE CORES LENGTH A. NUMBER TEST VOLT. VALUE SIGN.
REEL #
=CAB+ECP4-X42 =CAB+DSHB-302S6
=CAB-W90 Molded-b4 4x1,5 mm² A1040277
Stop Engine Stop Engine

=CAB+ECP4-X44

TERMINAL STRIP X44 JUNCTION BOX ECP4

=CAB+ECP4-X42 =CAB+DSHB-302S7
=CAB-W91 Molded-b4 4x1,5 mm² A1040277
Emergency Stop Dashboard Emergency Stop Dashboard

=CAB+ECP4-X44

TERMINAL STRIP X44 JUNCTION BOX ECP4

=CAB+ECP4-X42 =CAB+DSHB-302S8
=CAB-W92 Molded-b4 4x1,5 mm² A1040277
Winch Stop

=CAB+ECP4-X44

TERMINAL STRIP X44 JUNCTION BOX ECP4

=CAB+ECP4-200K3

Winch Stop

=CAB+ECP4-X42 =CAB+DSHB-303S4
=CAB-W93 Molded-b4 4x1,5 mm² A1040277
Start Generator

=CAB+ECP4-X44

TERMINAL STRIP X44 JUNCTION BOX ECP4

=CAB+ECP4-X42 =CAB+DSHB-303S7
=CAB-W94 Molded-b4 4x1,5 mm² A1040277
Stop Generator SPEED Low / Medium / High

=CAB+ECP4-X44

TERMINAL STRIP X44 JUNCTION BOX ECP4

=CAB+ECP4-X42 =CAB+DSHB-304S1
=CAB-W95 Molded-b4 4x1,5 mm² A1040277
Brake Control Brake Control

=CAB+ECP4-X44

TERMINAL STRIP X44 JUNCTION BOX ECP4

=CAB+ECP4-X42 =CAB+DSHB-304S2
=CAB-W96 Molded-b4 4x1,5 mm² A1040277
Throttle Up Throttle Up

=CAB+ECP4-X44

TERMINAL STRIP X44 JUNCTION BOX ECP4

=CAB+ECP4-X42 =CAB+DSHB-304J5
=CAB-W97 RADOX 7x1 mm² A1049155
Levelwind Levelwind

Unit serial no.


THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
1403 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 1405

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Cable overview : =CAB#-W90 < = > =CAB#-W97 = CAB + - 1404
0 1 2 3 4 5 6 7 8 9

Cable overview
CORE TO CORE
CABLE CODE FROM TO CABLE TYPE CORES LENGTH A. NUMBER TEST VOLT. VALUE SIGN.
REEL #
=CAB+ECP4-X44

TERMINAL STRIP X44 JUNCTION BOX ECP4

=CAB+ECP4-X42 =CAB+DSHB-304J5
=CAB-W98 RADOX 7x1 mm² A1049155
Levelwind Down Levelwind

=CAB+ECP4-X44

TERMINAL STRIP X44 JUNCTION BOX ECP4

=CAB+ECP4-X42 =CAB+-305Z1
=CAB-W99 RADOX 3x1 mm² 8 meter A1049118
TERMINAL STRIP X42 JUNCTION BOX ECP4 Horn

=CAB+ECP2-X22 =CAB+-301S1
=CAB-W100 RADOX 3x1 mm² A1049118
TERMINAL STRIP X22 CONTROL PANEL JB2 (24VDC) Gas Sensor Cabin

=CAB+ECP2-X22 =CAB+-301S2
=CAB-W101 RADOX 3x1 mm² A1049118
TERMINAL STRIP X22 CONTROL PANEL JB2 (24VDC) Gas Sensor Air Inlet

=CAB+ECP2-X22 =CAB+-301S4
=CAB-W102 RADOX 3x1 mm² A1049118
TERMINAL STRIP X22 CONTROL PANEL JB2 (24VDC) Smoke Sensor

=CAB+ECP2-X28

GAS SENSOR SPARE

=CAB+ECP2-X22 =CAB+EJB14-X142
=CAB-W103 RADOX 3x1 mm² A1049118
TERMINAL STRIP X22 CONTROL PANEL JB2 (24VDC) TERMINAL STRIP X142 JUNCTION BOX EJB14

=CAB+EJB14-X142 =CAB+-301S8
=CAB-W104 Molded-b4 4x1,5 mm² A1040277
TERMINAL STRIP X142 JUNCTION BOX EJB14 Door Switch Left

=CAB+ECP2-X22 =CAB+-302B0
=CAB-W105 RADOX 3x1 mm² A1049118
TERMINAL STRIP X22 CONTROL PANEL JB2 (24VDC) Low Pressure

=CAB+ECP2-X28

Low Pressure

=CAB+ECP2-X28 =CAB+-302B1
=CAB-W106 RADOX 3x1 mm² A1049118
TERMINAL STRIP X28 CONTROL PANEL JB2 (IS) Low Pressure

=CAB+ECP2-X28 =CAB+-302B2
=CAB-W107 RADOX 3x1 mm² A1049118
TERMINAL STRIP X28 CONTROL PANEL JB2 (IS) Air Flow

=CAB+ECP2-X22 =CAB+-302S6
=CAB-W108 RADOX 3x1 mm² A1049118
PRESSURIZING FAN OVERHEATED Manual Call Point

=CAB+ECP2-X28

TERMINAL STRIP X28 CONTROL PANEL JB2 (IS)

Unit serial no.


THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
1404 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 1406

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Cable overview : =CAB#-W97 < = > =CAB#-W108 = CAB + - 1405
0 1 2 3 4 5 6 7 8 9

Cable overview
CORE TO CORE
CABLE CODE FROM TO CABLE TYPE CORES LENGTH A. NUMBER TEST VOLT. VALUE SIGN.
REEL #
=CAB+ECP2-X22 =CAB+-302S7
=CAB-W109 RADOX 3x1 mm² A1049118
Manual Call Alarm Emergency Stop Cabin

=CAB+ECP2-X28

TERMINAL STRIP X28 CONTROL PANEL JB2 (IS)

=CAB+ECP2-X28 =CAB+-305Z5
=CAB-W110 RADOX 3x1 mm² A1049118
TERMINAL STRIP X28 CONTROL PANEL JB2 (IS) SOUNDER

=CAB+ECP2-X22 =CAB+ECP4-X42
=CAB-W111 RADOX 25x1,5 mm² A1094360
TERMINAL STRIP X22 CONTROL PANEL JB2 (24VDC) TERMINAL STRIP X42 JUNCTION BOX ECP4

=CAB+ECP2-X26 =CAB+ECP4-X44

TERMINAL STRIP X26 CONTROL PANEL JB2 TERMINAL STRIP X44 JUNCTION BOX ECP4

=CAB+ECP2-X22 =CAB+EJB11-X112
=CAB-W112 RADOX 25x1,5 mm² A1094360
TERMINAL STRIP X22 CONTROL PANEL JB2 (24VDC) TERMINAL STRIP X112 JUNCTION BOX EJB11

=CAB+-SKT4 =CAB+ECP2-X21
=CAB-W113 RADOX 5x2,5 mm² A1055970
Dashboard Light TERMINAL STRIP X21 CONTROL PANEL JB2 (230VAC)

=CAB+-SKT3 =CAB+ECP2-X22
=CAB-W114 RADOX 12x1,5 mm² A1064044
CANBUS TO DASHBOARD TERMINAL STRIP X22 CONTROL PANEL JB2 (24VDC)

=CAB+ECP2-X22 =CAB+-101A8
=CAB-W115 RADOX 5x2,5 mm² 6 meter A1055970
TERMINAL STRIP X22 CONTROL PANEL JB2 (24VDC) Intercom

=CAB+-SKT57 =CAB+ECP2-X22
=CAB-W116 RADOX 3x2,5 mm² 8 meter A1049117
Intercom 1 TERMINAL STRIP X22 CONTROL PANEL JB2 (24VDC)

=CAB+-SKT71 =CAB+CPRK-60U1
=CAB-W118 SABIX-SLPRNG 7x1 mm² A1111587
Connector Bulkhead SKT52 Loadpin

=CAB+-SKT59 =CAB+CPRK-214U3-SP
=CAB-W119 CC600 3x2,5 mm² A1037830
Connector Bulkhead SKT57 SP SP/DLL

=CAB+ECP4-X42 =CAB+DSHB-J1
=CAB-W120 RADOX 2x1,5 mm² A1064704
TERMINAL STRIP X42 JUNCTION BOX ECP4

=CAB+ECP2-X22 =CAB+-104M2
=CAB-W135 RADOX 5x1,5 mm² A1049158
TERMINAL STRIP X22 CONTROL PANEL JB2 (24VDC) SCREEN WIPER

=CAB+ECP2-X21 =CAB+ECP6-X61
=CAB-W136 RADOX 4x10 mm² A1055971
TERMINAL STRIP X21 CONTROL PANEL JB2 (230VAC) TERMINAL STRIP X61 JUNCTION BOX ECP6

=CAB+EJB14-X142 =CAB+-301S9
=CAB-W137 Molded-b4 4x1,5 mm² A1040277
TERMINAL STRIP X142 JUNCTION BOX EJB14 Door Switch Right

Unit serial no.


THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
1405 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 1407

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Cable overview : =CAB#-W109 < = > =CAB#-W137 = CAB + - 1406
0 1 2 3 4 5 6 7 8 9

Cable overview
CORE TO CORE
CABLE CODE FROM TO CABLE TYPE CORES LENGTH A. NUMBER TEST VOLT. VALUE SIGN.
REEL #
=CAB+-210W7 =CAB+-210Z7
=CAB-W180 RADOX 3x1 mm² A1049118
Intercom Speaker

=CAB+-214W1 =CAB+-PE1
=CAB-W181 GEXOL 1x8 AWG A1024932
reel empty

=CAB+-214U0-PE =CAB+-214W1
=CAB-W182 GEXOL 1x8 AWG 75 meter A1024932
reel empty

=CAB+-PLG59 =CAB+-214W3
=CAB-W183 GEXOL 1x8 AWG A1024932
Connector Bulkhead SKT52 SP reel empty

=CAB+-214U3.1 =CAB+-214W3
=CAB-W184 GEXOL 1x8 AWG 75 meter A1024932
SP/DLL reel empty

=CAB+-214U3.1-SP

=CAB+-214W5 =CAB+-PE1
=CAB-W186 GEXOL 1x8 AWG A1024932
reel empty

=CAB+-214U5-PE =CAB+-214W5
=CAB-W187 GEXOL 1x8 AWG 75 meter A1024932
reel empty

=CAB+-PLG59 =CAB+-214W6
=CAB-W188 GEXOL 1x8 AWG A1024932
SP/DLL reel empty

=CAB+-PLG60

Connector Bulkhead SKT52 SP

=CAB+-214U6 =CAB+-214W6
=CAB-W189 GEXOL 1x8 AWG 75 meter A1024932
SP/DLL reel empty

=CAB+-214U6-PE

=CAB+-SKT51 =CAB+DSHB-J3
=CAB-W206 RADOX 6x0,5 mm² A1064046
Encoder 1

=CAB+DSHB-J5

Encoder 1

=CAB+-SKT52 =CAB+DSHB-J5
=CAB-W207 RADOX 6x0,5 mm² A1064046
Encoder 2 Encoder 1

=CAB+DSHB-J4

Loadpin

Unit serial no.


THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
1406 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 1408

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Cable overview : =CAB#-W180 < = > =CAB#-W207 = CAB + - 1407
0 1 2 3 4 5 6 7 8 9

Cable overview
CORE TO CORE
CABLE CODE FROM TO CABLE TYPE CORES LENGTH A. NUMBER TEST VOLT. VALUE SIGN.
REEL #
=CAB+-SKT50 =CAB+DSHB-J2
=CAB-W208 RADOX 7x1 mm² A1049155
Loadpin Loadpin

=CAB+DSHB-J9

Encoder 2

=CAB+-SKT56 =CAB+DSHB-J4
=CAB-W209 RADOX 10x0,5 mm² 3.2 meter A1064047
MMD Loadpin

=CAB+DSHB-J2

Loadpin

=CAB+ECP4-X42 =CAB+DSHB-210U8
=CAB-W232 Molded-a3 3x1,5 mm² A1040277
TERMINAL STRIP X42 JUNCTION BOX ECP4 Kerr Backup Display

=CAB+-SKT53 =CAB+DSHB-P33
=CAB-W233 RADOX 7x1 mm² A1049155
Encoder 3 Encoder 3

=CAB+-SKT62 =CAB+CPRK-250U3
=CAB-W825 RADOX 5x1,5 mm² 8 meter A1049158
Wellhead Monitor POTENTIAL MONITOR

=CAB+

=CAB+-SKT61 =CAB+CPRK-250U3
=CAB-W826 RADOX 3x1,5 mm² 8 meter A1082865
Green Light POTENTIAL MONITOR

=CAB+CPRK-250U3 =CAB+-250A6
=CAB-W827 Coax 1x0,5 mm² 8 meter A0018386
POTENTIAL MONITOR Antenna

=CAB+-100U0 =CAB+-SKT1
=CAB-WR RADOX 4x25 mm² A1055972

=CAB+-PLG57 =CAB+-210W7
=CAB-WRL RADOX 3x1 mm² A1049118
Intercom 1

Unit serial no.


THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
1407 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 1500

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Cable overview : =CAB#-W208 < = > =CAB#-WRL = CAB + - 1408
0 1 2 3 4 5 6 7 8 9

Bill of materials
CODE Σ SPECIFICATIONS SUPPLIER PART NUMBER PAGE COLUMN

=CAB+-250A6 1 25 CABLE + ANTENNA NOV ASEP Elmar A1041099 =CAB+/250 6

=CAB+-101A8 1 BASE STATION INTERCOM NOV ASEP Elmar A1085470 =CAB+ECP2/101 7

=CAB+-100A7 1 DEHUMIDIFIER NOV ASEP Elmar A1093830 =CAB+ECP6/100 7

=CAB+-302B0 1 SWITCH NOV ASEP Elmar A1035388 =CAB+ECP2/302 0

=CAB+-302B1 1 SWITCH NOV ASEP Elmar A1035388 =CAB+ECP2/302 1

=CAB+-302B2 1 SWITCH NOV ASEP Elmar A1035388 =CAB+ECP2/302 2

=CAB+-ECP6 1 ECP6 NOV ASEP Elmar 8501036012-1 =CAB+ECP6/100 0

=CAB+-ECP4 1 ECP5 NOV ASEP Elmar 8501036015-3 =CAB+ECP4/200 0

=CAB+-ECP2 1 ECP2 NOV ASEP Elmar 8501036545-1 =CAB+ECP2/100 0

=CAB+-102H2 1 LIGHT NOV ASEP Elmar A0000321 =CAB+ECP2/102 2

=CAB+-102H2 2 TL TUBE NOV ASEP Elmar A0016118 =CAB+ECP2/102 2

=CAB+-102H3 2 TL TUBE NOV ASEP Elmar A0016118 =CAB+ECP2/102 3

=CAB+-102H3 1 FLUORESCENT LIGHT 2X NOV ASEP Elmar A1050781 =CAB+ECP2/102 3

=CAB+-101M0 1 CENTRIFUGAL VENTILATOR NOV ASEP Elmar A1032701 =CAB+ECP2/101 0

=CAB+-104M2 1 WIPER MOTOR NOV ASEP Elmar A1103750 =CAB+ECP2/200 6

=CAB+-PLG59 1 PLUG 3P NOV ASEP Elmar A1058172 =CAB+/214 3

=CAB+-PLG60 1 PLUG 3P NOV ASEP Elmar A1058172 =CAB+/214 6

=CAB+-PLG1 1 PLUG 3P+N+E NOV ASEP Elmar A1059803 =CAB+ECP2/100 0

=CAB+-PLG1 1 COVER NOV ASEP Elmar A1059848 =CAB+ECP2/100 0

=CAB+-PLG2 1 PLUG NOV ASEP Elmar A1068665 =CAB+ECP2/300 5

=CAB+-PLG2 1 DUST CAP+CHAIN (R) NOV ASEP Elmar A1061895 =CAB+ECP2/300 5

=CAB+-PLG57 1 PLUG 6P NOV ASEP Elmar A1068678 =CAB+DSHB/210 7

=CAB+-PLG2 1 FIXED ADAPTOR NOV ASEP Elmar A1082447 =CAB+ECP2/300 5

=CAB+-PLG57 1 DUST CAP+CHAIN (PS) NOV ASEP Elmar A1082716 =CAB+DSHB/210 7

=CAB+-PLG60 1 DUST CAP+CHAIN (PS) NOV ASEP Elmar A1082717 =CAB+/214 6

=CAB+-PLG59 1 DUST CAP+CHAIN (PS) NOV ASEP Elmar A1082717 =CAB+/214 3

=CAB+-301R4 1 RESISTOR NOV ASEP Elmar A1041982 =CAB+ECP2/301 4

=CAB+-302S7 1 EMERGENCY SWITCH NOV ASEP Elmar A0021161 =CAB+ECP2/302 7

=CAB+-302S6 1 MANUAL CALL POINT NOV ASEP Elmar A1018115 =CAB+ECP2/302 6

=CAB+-102S0 1 SWITCH NOV ASEP Elmar A1059373 =CAB+ECP2/102 0

=CAB+-102S1 1 SWITCH NOV ASEP Elmar A1059373 =CAB+ECP2/102 1

=CAB+-301S4 1 SMOKE DETECTOR NOV ASEP Elmar A1062158 =CAB+ECP2/301 4

=CAB+-301S8 1 LMIT SWITCH NOV ASEP Elmar A1100133 =CAB+ECP2/301 8

=CAB+-301S9 1 LMIT SWITCH NOV ASEP Elmar A1100133 =CAB+ECP2/301 9

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
1408 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 1501

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Bill of materials electric = CAB + - 1500
0 1 2 3 4 5 6 7 8 9

Bill of materials
CODE Σ SPECIFICATIONS SUPPLIER PART NUMBER PAGE COLUMN

=CAB+-301S1 1 GAS DETECTOR NOV ASEP Elmar A1108467 =CAB+ECP2/301 1

=CAB+-301S2 1 GAS DETECTOR NOV ASEP Elmar A1108467 =CAB+ECP2/301 2

=CAB+-301S2 1 WEATHER GUARD NOV ASEP Elmar A1112992 =CAB+ECP2/301 2

=CAB+-SKT59 1 DUST CAP+CHAIN (R) NOV ASEP Elmar A1058159 =CAB+/214 3

=CAB+-SKT51 1 SOCKET 8S NOV ASEP Elmar A1058275 =CAB+DSHB/210 0

=CAB+-SKT1 1 HOUSING CABLE NOV ASEP Elmar A1059802 =CAB+ECP2/100 0

=CAB+-SKT1 1 SOCKET 3P+N+E NOV ASEP Elmar A1059801 =CAB+ECP2/100 0

=CAB+-SKT3 1 CAP SHELL SIZE 32 NOV ASEP Elmar A1061894 =CAB+ECP2/300 9

=CAB+-SKT3 1 SOCKET NOV ASEP Elmar A1068666 =CAB+ECP2/300 9

=CAB+-SKT61 1 SOCKET 3S NOV ASEP Elmar A1068682 =CAB+/250 4

=CAB+-SKT62 1 SOCKET 5S NOV ASEP Elmar A1068683 =CAB+/250 2

=CAB+-SKT53 1 SOCKET 6S NOV ASEP Elmar A1068684 =CAB+DSHB/210 9

=CAB+-SKT57 1 SOCKET 6S NOV ASEP Elmar A1068684 =CAB+ECP2/101 9

=CAB+-SKT52 1 SOCKET 8S NOV ASEP Elmar A1068685 =CAB+DSHB/210 2

=CAB+-SKT56 1 SOCKET 10S NOV ASEP Elmar A1068686 =CAB+DSHB/210 5

=CAB+-SKT50 1 SOCKET 10S NOV ASEP Elmar A1068686 =CAB+DSHB/210 4

=CAB+-SKT3 1 FIXED ADAPTOR NOV ASEP Elmar A1082447 =CAB+ECP2/300 9

=CAB+-SKT57 1 DUST CAP+CHAIN (PS) NOV ASEP Elmar A1082716 =CAB+ECP2/101 9

=CAB+-SKT53 1 DUST CAP+CHAIN (PS) NOV ASEP Elmar A1082716 =CAB+DSHB/210 9

=CAB+-SKT56 1 DUST CAP+CHAIN (PS) NOV ASEP Elmar A1082717 =CAB+DSHB/210 5

=CAB+-SKT52 1 DUST CAP+CHAIN (PS) NOV ASEP Elmar A1082717 =CAB+DSHB/210 2

=CAB+-SKT51 1 DUST CAP+CHAIN (PS) NOV ASEP Elmar A1082717 =CAB+DSHB/210 0

=CAB+-SKT50 1 DUST CAP+CHAIN (PS) NOV ASEP Elmar A1082717 =CAB+DSHB/210 4

=CAB+-SKT61 1 DUST CAP+CHAIN (PS) NOV ASEP Elmar A1082717 =CAB+/250 4

=CAB+-SKT62 1 DUST CAP+CHAIN (PS) NOV ASEP Elmar A1082718 =CAB+/250 2

=CAB+-SKT4 1 SOCKET 8P NOV ASEP Elmar A1089486 =CAB+ECP2/102 5

=CAB+-SKT6 1 SOCKET 4P NOV ASEP Elmar A1100432 =CAB+ECP2/101 2

=CAB+-SKT71 1 SOCKET 19P NOV ASEP Elmar A1101335 =CAB+/60 1

=CAB+-SKT59 1 RECEPTACLE 3S NOV ASEP Elmar A1102238 =CAB+/214 3

=CAB+-214U3.1 1 LEAD ELECTRODE NOV ASEP Elmar A0017611 =CAB+/214 3

=CAB+-214U0 3 CLAMP NOV ASEP Elmar A0017613 =CAB+/214 0

=CAB+-214U6 3 CLAMP NOV ASEP Elmar A0017613 =CAB+/214 6

=CAB+-214U5 3 CLAMP NOV ASEP Elmar A0017613 =CAB+/214 5

=CAB+-103U2 1 AIRCO NOV ASEP Elmar A1041909 =CAB+ECP6/103 2

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
1500 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 1502

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Bill of materials electric = CAB + - 1501
0 1 2 3 4 5 6 7 8 9

Bill of materials
CODE Σ SPECIFICATIONS SUPPLIER PART NUMBER PAGE COLUMN

=CAB+-103U6 1 AIRCO NOV ASEP Elmar A1041909 =CAB+ECP6/103 6

=CAB+-103U8 1 AIRCO NOV ASEP Elmar A1041909 =CAB+ECP6/103 8

=CAB+-103U4 1 AIRCO NOV ASEP Elmar A1041909 =CAB+ECP6/103 4

=CAB+-103U6.1 1 THERMOSTAAT 5-30C NOV ASEP Elmar A1080153 =CAB+ECP6/103 6

=CAB+-214W3 1 REEL NOV ASEP Elmar A0016294 =CAB+/214 3

=CAB+-214W1 1 REEL NOV ASEP Elmar A0016294 =CAB+/214 0

=CAB+-214W6 1 SP / DLL REEL 250FT NOV ASEP Elmar A1027372 =CAB+/214 6

=CAB+-214W5 1 LOADCELL REEL NOV ASEP Elmar A1060276 =CAB+/214 5

=CAB+-101X7 1 DOUBLE WALL SOCKET NOV ASEP Elmar A0013687 =CAB+ECP6/101 7

=CAB+-101X6 1 DOUBLE WALL SOCKET NOV ASEP Elmar A0013687 =CAB+ECP6/101 6

=CAB+-101X4 1 DOUBLE WALL SOCKET NOV ASEP Elmar A0013687 =CAB+ECP6/101 4

=CAB+-101X5 1 DOUBLE WALL SOCKET NOV ASEP Elmar A0013687 =CAB+ECP6/101 5

=CAB+-100X7 1 WALLSOCKET NOV ASEP Elmar A1016387 =CAB+ECP6/100 7

=CAB+-101X2 1 WALL SOCKET NOV ASEP Elmar A1103319 =CAB+ECP6/101 2

=CAB+-101X1 1 WALL SOCKET NOV ASEP Elmar A1103319 =CAB+ECP6/101 1

=CAB+-101X3 1 WALL SOCKET NOV ASEP Elmar A1103319 =CAB+ECP6/101 3

=CAB+-305Z5 1 BEEPER NOV ASEP Elmar A0005267 =CAB+ECP2/305 5

=CAB+-210Z7 1 SPEAKER NOV ASEP Elmar A1070818 =CAB+DSHB/210 7

=CAB+-305Z1 1 SIGNALLING HOOTER NOV ASEP Elmar A1104537 =CAB+ECP4/305 1

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
1501 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2500

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Bill of materials electric = CAB + - 1502
0 1 2 3 4 5 6 7 8 9

Hazardous area schedule


CODE SERIAL SPECIFICATIONS MANUFAC. / TYPE NUMBER PROT. TYPE / CERTIFICATE VOLTAGE / CURRENT POWER A. NUMBER

Ventinet II 2 G EEx d IIB T3 115 VAC 0.37kW


Centrifugal ventilator DIC-INOX 120/2 0.37 kW 120/1/60 IP55
=CAB+-101M0 A1032701
ATEX EEx d
DIC INOX 120/2M, ATX, 120 KEMA 04ATEX2107 X 4,7 A

Ceag Ex eds IIC T4


Fluorescent Light Assy ExsIIB4, 2x18 Watt, 110V-250V 47-63Hz
=CAB+-102H2 A0000321
EEx de
ELLK92018/18 PTB 96 ATEX 2144 A

Ceag II 2G Ex eds IIC T4 bzw Ex edms ib II 115 VAC


=CAB+-102H3 FLUORESCENT LIGHT 2X18W EX BACKUP 92018 A1050781
12260879401 PTB 96 ATEX 2144 A

Ceag II 2 G EEx ed IIC T6


=CAB+-102S0 Switch EEx de IIC T6, 1W 2xM20 WALL MOUNTED A1059373
GHG2736000R0003 PTB98ATEX3121 A

Ceag II 2 G EEx ed IIC T6


=CAB+-102S1 Switch EEx de IIC T6, 1W 2xM20 WALL MOUNTED A1059373
GHG2736000R0003 PTB98ATEX3121 A

Safe Air Technology, LLC II 3 G EEx nAC IIB T3 230 VAC


=CAB+-103U2 Airco 230V/50 in/out, no heater II 3G EEx nA ATEX T3 A1041909
RACX-1352-ICDZ Artidor II ATEX 1211 A

Safe Air Technology, LLC II 3 G EEx nAC IIB T3 230 VAC


=CAB+-103U4 Airco 230V/50 in/out, no heater II 3G EEx nA ATEX T3 A1041909
RACX-1352-ICDZ Artidor II ATEX 1211 A

Safe Air Technology, LLC II 3 G EEx nAC IIB T3 230 VAC


=CAB+-103U6 Airco 230V/50 in/out, no heater II 3G EEx nA ATEX T3 A1041909
RACX-1352-ICDZ Artidor II ATEX 1211 A

Safe Air Technology, LLC II 3 G EEx nAC IIB T3 230 VAC


=CAB+-103U8 Airco 230V/50 in/out, no heater II 3G EEx nA ATEX T3 A1041909
RACX-1352-ICDZ Artidor II ATEX 1211 A

ATEX II 2G Ex d(e) IIC T6


=CAB+-301S1 Gas detector PIR3000 A1108467
6811160 BVS 05 ATEX E 143 X de A

ATEX II 2G Ex d(e) IIC T6


=CAB+-301S2 Gas detector PIR3000 A1108467
6811160 BVS 05 ATEX E 143 X de A

Apollo II 1G Ex ia IIC T4
=CAB+-301S4 Smoke Detector & Base A1062158
C03345 Baseefa06ATEX0007X A

Honeywell II2G EEx d IIC T6


=CAB+-301S8 Limit switch GXA w/adj side rotary lever II2G EEx d IIC T6 A1100133
GXA51A2B KEMA 00ATEX 2103X A

Honeywell II2G EEx d IIC T6


=CAB+-301S9 Limit switch GXA w/adj side rotary lever II2G EEx d IIC T6 A1100133
GXA51A2B KEMA 00ATEX 2103X A

Medc II 2 GD T135°C EEx emd IIC T4


=CAB+-302S6 Manual call point ex A1018115
BG2EDC1FN BAS02ATEX2105X A

Stahl II 2G EEx edqm ia/ib [ia/ib] T4 690 V 1,5W


=CAB+-302S7 Emergency switch EEx dem IIC T6 IP66 RED incl. box 80x93x72 A0021161
8040/1180.015-060 PTB01ATEX1105 23 A

Pronor N.V. II 3 G Ex nR IIC T6


=CAB+-305Z1 Signalling Hooter HZ2 24Vdc/0,8A II3G Ex nR IICT6 A1104537
212 951 13 D1249255 A

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
1502 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2501

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Hazardous area schedule = CAB + - 2500
0 1 2 3 4 5 6 7 8 9

Hazardous area schedule


CODE SERIAL SPECIFICATIONS MANUFAC. / TYPE NUMBER PROT. TYPE / CERTIFICATE VOLTAGE / CURRENT POWER A. NUMBER

Clifford & Snell EEx ia IIC T4


=CAB+-305Z5 Beeper EExia 24VDC A0005267
YO3 BAS 00 ATEX 1259 A

Ex II 3 (1)G Ex de nA nC nL (ia) II B T
=CAB+-ECP2 ECP2 CAB 2X115V 125A SM IFM F&G ATX > 8501036545-1
8501036545-1 A

Bartec Nederland B.V. Ex II 3 G Ex de nA nC T3 X


=CAB+-ECP4 ECP4 CAB 24V IFM DSHB ATX > 8501036015-3
8501036015-3 A

Marechal Ex II2 G/D - Ex de IIC tD A21


=CAB+-PLG1 DX9 insert 3P+N+E 380-440V 60Hz Male A1059803
2691017 LCIE 04 ATEX 6038 63 A

Marechal Ex II2 G/D - Ex de IIC tD A21


=CAB+-PLG1 DX9 Cover A1059848
269A926 LCIE 04 ATEX 6038 63 A

Amphenol Ex II 3G Ex nA T3
=CAB+-PLG2 Mil PLUG 23P SIZE 32 STRAIGHT ADG ASSY ATX A1068665
Ex Assembly ADG Serie ATEX 2240X A

NOV ASEP Elmar Ex ll 3G Ex nA ll T3


=CAB+-PLG57 EX Straight plug 6P, Shell size 10 A1068678
PT06SE10-6P-SR (Ex nA) Epsilon 07 ATEX 2240X A

Marechal Ex II2 G/D - Ex de IIC tD A21


=CAB+-SKT1 DX9 Housing Coupler Socket A1059802
269A963 LCIE 04 ATEX 6038 63 A

Marechal Ex II2 G/D - Ex de IIC tD A21


=CAB+-SKT1 DX9 insert 3P+N+E 380-440V 60Hz Female A1059801
2694017 LCIE 04 ATEX 6038 63 A

Amphenol Ex II 3G Ex nA T3
=CAB+-SKT3 Mil SOCKET 23P SIZE 32 WALL F.ADG ASSY ATX A1068666
ADG-00A-32-6S-621 [Ex nA] ATEX 2240X A

Amphenol Ex II 3G Ex nA T3
=CAB+-SKT4 Mil SOCKET 8P SIZE 32 WALL F.ADG ASSY ATX A1089486
Ex Assembly ADG Serie EPSILON 07 ATEX 2240X A

Amphenol EEx d IIC T6


=CAB+-SKT6 EX DLL/SP/WPM inline socket 4x10AWG F A1100432
EX-13-3-12-316SN01 Sira 03 ATEX 1101 X A

ASEP B.V. Ex ll 3G Ex nA ll T3
=CAB+-SKT50 EX Straight Socket, 10S, Shell size 12 A1068686
PT06SE12-10S-SR (Ex nA) Epsilon 07 ATEX 2240X A

ASEP B.V. II 3 G Ex nA II T3
=CAB+-SKT52 EX Straight Socket, 8S, Shell size 12 A1068685
PT06SE12-8S-SR (Ex nA) EPSILON 07 ATEX 2240X A

NOV ASEP Elmar Ex ll 3G Ex nA ll T3


=CAB+-SKT53 SOCKET 6S SHELL SIZE 10 ATX A1068684
PT06SE10-6S-SR (Ex nA) Epsilon 07 ATEX 2240X A

ASEP B.V. Ex ll 3G Ex nA ll T3
=CAB+-SKT56 EX Straight Socket, 10S, Shell size 12 A1068686
PT06SE12-10S-SR (Ex nA) Epsilon 07 ATEX 2240X A

NOV ASEP Elmar Ex ll 3G Ex nA ll T3


=CAB+-SKT57 SOCKET 6S SHELL SIZE 10 ATX A1068684
PT06SE10-6S-SR (Ex nA) Epsilon 07 ATEX 2240X A

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2500 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2502

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Hazardous area schedule = CAB + - 2501
0 1 2 3 4 5 6 7 8 9

Hazardous area schedule


CODE SERIAL SPECIFICATIONS MANUFAC. / TYPE NUMBER PROT. TYPE / CERTIFICATE VOLTAGE / CURRENT POWER A. NUMBER

ASEP B.V. Ex ll 3G Ex nA ll T3
=CAB+-SKT61 EX Straight Socket, 3S, Shell size 12 A1068682
PT06SE12-3S-SR (Ex nA) Epsilon 07 ATEX 2240X A

ASEP B.V. Ex ll 3G Ex nA ll T3
=CAB+-SKT62 EX Straight Socket, 5S, Shell size 14 A1068683
PT06SE14-5S-SR (Ex nA) Epsilon 07 ATEX 2240X A

Amphenol EEx d IIC T6


=CAB+-SKT71 EX CONTROL SKT 19X12 A1101335
EX-17-3-16-377SN SIRA03ATEX1101X A

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2501 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE +ECP2/1

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Hazardous area schedule = CAB + - 2502
0 1 2 3 4 5 6 7 8 9

National Oilwell Varco Corporate Headquarters 7909 Parkwood Circle Dr. Houston, TX 77036 Phone: 1 888 262 8645 www.NOV.com/ASEPElmar

Cabin

ECP2 = CAB 2X115V 125A SM IFM F&G ATX


8501036545/1

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
+/2502 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 30

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 11.Aug.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Frontpage = CAB + ECP2 - 1
0 1 2 3 4 5 6 7 8 9

TERMINAL STRIP NUMBERING CONNECTORS

=CAB+ECP2-X21 = TERMINAL STRIP X21 CONTROL PANEL JB2 (230VAC)


=CAB+ECP2-X22 = TERMINAL STRIP X22 CONTROL PANEL JB2 (24VDC)
=CAB+ECP2-X24 = TERMINAL STRIP X24 CONTROL PANEL JB2
=CAB+ECP2-X26 = TERMINAL STRIP X26 CONTROL PANEL JB2
=CAB+ECP2-X28 = TERMINAL STRIP X28 CONTROL PANEL JB2 (IS)

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
1 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 31

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 15.Aug.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Terminal Strips & Connectors = CAB + ECP2 - 30
0 1 2 3 4 5 6 7 8 9

CONNECTORS

=CAB+ECP2#-PLGA = PLGA Cantrak


=CAB+ECP2#-300P4-A = 300P4-A Cantrak
=CAB+ECP2#-SKTC2 = SKTC2 Interface Programming (RS232)

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
30 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 40

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 15.Aug.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Connectors = CAB + ECP2 - 31
0 1 2 3 4 5 6 7 8 9

LINE BUSHING NUMBERING


=CAB+ECP2-A 1 8501040891 LINE BUSHING M42 2x35MM² 690V ATX =CAB+ECP2-F 1 8501036520 LINE BUSHING M42 32x1,5mm² 250V ATX>
=CAB+ECP2-B 1 8501040891 LINE BUSHING M42 2x35MM² 690V ATX =CAB+ECP2-G 1 8501040889 LINE BUSHING M36 7x4MM² 690V ATX
=CAB+ECP2-C 1 8501040891 LINE BUSHING M42 2x35MM² 690V ATX =CAB+ECP2-H 1 8501040888 LINE BUSHING M33 6+PE x2,5MM² 690V ATX
=CAB+ECP2-D 1 8501040891 LINE BUSHING M42 2x35MM² 690V ATX =CAB+ECP2-I 1 8501040892 LINE BUSHING M24 GREEN MOLDED
=CAB+ECP2-E 1 8501040890 LINE BUSHING M24 1x35MM² 690V ATX =CAB+ECP2-SPARE = TERMINAL STRIP SPARE JUNCTION BOX JB2

LINE BUSHING SPARES

EEx d EEx d
EEx e EEx e

EEx e EEx e

EEx d EEx d
EEx e EEx e

EEx e EEx e

EEx d EEx d
EEx e EEx e

EEx e EEx e

EEx d EEx d
EEx e EEx e

EEx e EEx e

EEx d EEx d
EEx e EEx e

EEx e EEx e

EEx d F 26 27 28 29 30 31 32 EEx d
EEx e EEx e

SPARE sp sp sp sp sp sp sp
EEx e EEx e

EEx d G 6 7 EEx d
EEx e EEx e

SPARE sp sp
EEx e EEx e

EEx d H 3 4 5 6 PE EEx d
EEx e EEx e

SPARE sp sp sp sp sp
EEx e EEx e

EEx d EEx d
EEx e EEx e

EEx e EEx e

EEx d EEx d
EEx e EEx e

EEx e EEx e

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
31 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 100

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 25.Aug.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Line Bushings = CAB + ECP2 - 40
0 1 2 3 4 5 6 7 8 9

110VAC 60Hz
+-ECP2
8501036545-1
110VAC 60Hz

1 3 5 7

-100K4
/100.4
2 4 6 8
-100F1A
Under/overvoltage
relay
1A
A0000934
A0020441
A0020442
11
1 2
-100K2
/100.2 12 14

-100F1B
Under/overvoltage A1
relay
-100K2
17-275VAC/DC M
1A
Set 121V-140V A1
A0000934 A2
On = 0,1sec
A0020441
A0020442 Off = 5sec
A1112821 A2
1 2
-100K4 1 3 5 7 1 1 -100F8
125A -100F7 3 3
14 11 /100.3 Main Main
1 3 5 7
12
A1073948 -303K2 Supply
A1042598 /303.2 Supply
2 4 6 8 2 4 2 4 L2
Non Zone L1
16A D-kar 16A D-kar
2 4 6 8 8501040868 8501040868
-100F0
Main Main Power ECP2 EX
L1-SPL / 101.0
Supply
Switch N1-SPL / 101.0
100A L2-SPL / 101.0
8501040862
8501040839 N2-SPL / 101.0
A1048931
8501040869 LED 230V
PE
RD
EEx-d
Voltage
Error

EEx d A 1 2 B 1 2 E PE F 19
-100H3 20 C 1 2 D 1 2 EEx d
EEx e EEx e
PE PE
PE
X21 1 2 3 X21 4 4 5 5 6 6 7 7
EEx e EEx e
+#
W50 1 2 3 4
+/20.0

Main Supply Airconditioners


A1059848 1 2 3 4 L1-JB6-2 / +ECP6/103.0
A1059803
*125A EX-d N1-JB6-2 / +ECP6/103.0
PLG1 L2-JB6-2 / +ECP6/103.0
N2-JB6-2 / +ECP6/103.1
SKT1 -PE-JB6-2 / +ECP6/103.1
*125A EX-d
A1059802 1 2 3 4
A1059801
Main Power Switched ECP6
WR 1 2 3 4 L1-JB6-1 / +ECP6/100.0
N1-JB6-1 / +ECP6/100.0
L2-JB6-1 / +ECP6/100.0

-100U0 N2-JB6-1 / +ECP6/100.1


L1 N1 L2 PE Connections to:
+/20.0 PE-JB6-1 / +ECP6/100.1
PWRP+ECP1
2x 110V +/- 5% page 100 1 2 /100.0
2ph+N+PE 3 4 /100.0
5 6 /100.0
60Hz +/- 2%
7 8 /100.0
125A 10kA
53 54 /303.5

Main Power Main Power Main Power 61 62 To JB6


Supply Shore Supply Supply 71 72 Non zone
83 84
2x 110v 60Hz 125A Power Pack Power Pack supply's

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
40 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 101

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Main Supply ECP2 = CAB + ECP2 - 100
0 1 2 3 4 5 6 7 8 9

115VAC 60Hz
100.9 / L1-SPL L1-SPL / 102.0
100.9 / N1-SPL N1-SPL / 102.0
115VAC 60Hz
100.9 / L2-SPL L2-SPL / 102.0
100.9 / N2-SPL N2-SPL / 102.0

24VDC-D 0VDC-D
-101Q0 1 3 5 13 21 1 3 -101F2
Pressurising PSU
Fan supply
4,0-6,3A 14 22 101G2
2 4
4A D-kar

/302.5
8501040873
A1085742
I> I> I> 8501040866
L1
2 4 6
1
-101G2 -303K3
24V 20A /303.3
1 3 A1108614 2
-305K4
/305.4 24V
2 4 PE

EEx d H 1 2 G 1 2 3 G 4 5 F 23 24 EEx d
EEx e EEx e
24VDC-E 0VDC-E
PE X1

X2

-101H5
POWER
ON
LED 24V
GN
-101D3 2 4 -101D4 2 4 EEx-d 24VDC-E 24VDC-E
2x 60A 45V 2x 60A 45V A1026947
EEx nA EEx nA
A1066383 1 3 A1066383 1 3 0VDC-E 0VDC-E 0VDC-E

-101F4
-101F2.1 1 2 PP-24VDC -101F5 1 -101F7 1 -101F8 2
24VDC Supply to Dashboard Winch Intercom
Supply Cabin 24VDC 24VDC 2A
20A 25A Supply Supply EEx de
2 1 2 2 1
A1085718 EEx de 20A 20A A1085707
A1079006 A1085719 EEx de EEx de A1079006
A1079006 A1085718 A1085718
24VDC-E
A1 A1079006 A1079006
-101K3
A1029768
PE 24VDC PE IS PE
A2
EEx nC
A1029768

14 11 /300.4
X21 8 9 X22 3 3 4 4 SP X22 1 1 1 1 2 2 2 SP SP X22 5 5 6 6 X22 7 7 8 8 X22 9 10 11 12
12

EEx e EEx e
Cabin Cabin

W69 1 2 3 W51 1 2 3 4 5 W52 9 1 2 3 4 5 6 16 17 18 W111 1 2 3 4 W114 1 2 3 4 W115 1 2 3 4 W116 1 2


+/20.3 +/20.1 +/20.1 +/20.18 +/21.8 +/21.9 +/21.11

+/21.11
A1082716
A1068684
L N +/20.4 +/20.4 Intercom 1 A B C D E F
+/21.8
A1100432 /300.5 /300.9 SKT57
M -SKT6 1 2 3 4 SP PLG2 C R P Y K T SKT3 R P
1~

+ECP4/300.0 / +24VDC-ECP2/ECP4

+ECP4/300.0 / 0VDC-ECP2/ECP4

+ECP4/300.1 / PE-ECP2/ECP4
=PWRP+EJB9

-101M0 -101A8
EEx d Intercom
Connections to: Connections to: Connections to: A1085470
120V 0.37kW
A1032701 +/21.8
PWRP+ECP3 PWRP+ECP3 WNCH+ECP5
+/20.3
page 200 page 200 page 300

Pressurising Auxiliary Supply Supply


Fan Cabin 24VDC JB4 Winch
Supply

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
100 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 102

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 25.Aug.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Main 24VDC Supply Control Circuit = CAB + ECP2 - 101
0 1 2 3 4 5 6 7 8 9

115VAC 60Hz
101.9 / L1-SPL L1-SPL / 200.0
101.9 / N1-SPL N1-SPL / 200.0
115VAC 60Hz
101.9 / L2-SPL L2-SPL / 200.0
101.9 / N2-SPL N2-SPL / 200.0
WNL-SPL1 / 200.0

1 N WNL-SPL2 / 200.0
-102F0
Cabin & Winch
Lighting
6A 30mA
C-kar
A1113057
2 N.

EEx d F 15 16 F 17 18 EEx d
EEx e EEx e
-102F0.1 1 -102F5 1
Cabine Winch
Lights Lights
2A 4A
2 2
A1085707 A1085712
A1079006 A1079006

1 3 1 3 1 3
-102S3 -102S5 -102S8
WINCH FLOOD
DASHBOARD
2 4 LIGHT 2 4 LIGHT 2 4
LIGHT
A0021204 A0021204
A0021204
A1026946 A1026946
A1026946

PE PE PE
X21 10 11 12 13 14 15 X21 16 17 18 19 20 X21 21 22 X21 23 24 SP SP SP SP SP SP
EEx e EEx e

W70 1 2 3 W71 3 2 1 W72 1 2 3 W73 1 2 3 4 5 7 W113 1 2 5 3 4 W52 10 11 12 13 14 15


+/20.3 +/20.4 +/20.4 +/20.5 +/21.7 +/20.1
+/21.7 +/20.4
/300.5
A1089486
SKT4 B C F H D E
PLG2 D E F G H J

11 11 L1 N 2 3 L PE

12 14 12 14

-102S0 -102S1 -102H3


-102H2 TL 2x18W
Switch Switch TL 2x18W
Cabin light 115V EX
Cabin light 115/230V EX Connections to: Connections to:
EX switch A1050781
EX switch A0000321
A1059373 A0016118 WNCH+ECP5 WNCH+ECP5
A1059373 A0016118 +/20.5
+/20.3
+/20.4 page 102 page 102

Cabin light Cabin light Cabin light Dashboard Light


Switch 1 Switch 2

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
101 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 200

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Cabin & Winch Lights = CAB + ECP2 - 102
0 1 2 3 4 5 6 7 8 9

115VAC 60Hz
102.9 / L1-SPL L1-ECP2
102.9 / N1-SPL N1-ECP2
115VAC 60Hz
102.9 / L2-SPL L2-ECP2
102.9 / N2-SPL N2-ECP2
-200F0 1 N
PSU
Supply 24VDC-E +12VDC 0VDC-D
200G0
6A 30mA 2 N.
C-kar
102.9 /A1113057
WNL-SPL1
53 83 3 86 87a 87
102.9 / WNL-SPL2 -200K6
L1 -303K3 -303K3 -303K3 24VDC/40A
-200G0 /303.3
54 /303.3
84 /303.3
4 85 A1026872
-200K6
30 /200.6
110/230V
87
12VDC 15A
A1069451
87a 30 /200.7
12V
EEx d F 13 14 21 22 F 8 9 10 11 12 EEx d
EEx e EEx e

-200F5 2
Screen
Wiper
6A
1
EEx de
A1085713
A1079006

24VDC-E

12VDC-E

0VDC-E 0VDC-E

-200F1.1 1 -200F3 1 -200F4 1


12VDC 12VDC 12VDC
Supply Supply Supply
8A Shooting WHM
2 2 2
EEx de Panel 8A
A1085716 4A EEx de
PE 0VDC-E PE PE 0VDC-E PE
A1079006 EEx de A1085716
X26 1 2 X22 13 SP A1085712 X26 3 4 A1079006 5 6 X22 14 15 X22 16 17 18 X22 19 20
A1079006
EEx e EEx e

W111 5 6 25 8 9 10 W82 1 2 GN/YE W83 1 2 GN/YE W111 11 12 W135 1 2 3 4 5 W111 13 14 W114 7 9


+/20.18 +/20.18 +/20.9 +/20.18 +/21.8

+/21.8
/300.9
SKT3 C E
+ECP4/200.0 / -12VDC

+ECP4/200.1 / -0VDC(12V)

+ECP4/200.1 / -B-EARTH

+ECP4/200.6 / -Wwstch1

+ECP4/200.6 / -GRNL-P
+ECP4/200.4 / -SWCHD-24V

+ECP4/200.4 / -JB4-SP

+ECP4/200.4 / -0VDC

WH BK BK/WH YE GY

+ECP4/200.7 / -Wwstch2

+ECP4/301.1 / Wnch-ctd
SKT20 - - - SKT21 - - -

M
SKT20 + + + SKT21 + + +

-104M2
-200U2 -200U4 SCREEN
12VDC WIPER
12VDC
Supply 24VDC 3A
Supply
Shooting Panel A1103750 Green
WHM
A0019438 +/20.8
A0019437
A0019438 Light
A0019437
A0020257
A0020257
+/20.11

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
102 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 201

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 20.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Junctionbox Supply Computer system Control = CAB + ECP2 - 200
0 1 2 3 4 5 6 7 8 9

EEx d EEx d
EEx e EEx e

-305K1 -305K2 -305K3 -304K8 -303K1


/305.1 /305.2 /305.3 /304.8 /303.1

11 11 11 11 11

12 14 12 14 12 14 12 14 12 14
-EM2
302.7

-EM1
302.7
PE
X22 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 sp 37 38 sp sp sp sp sp
EEx e EEx e

W112 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25
+/21.3

X112 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 sp sp sp sp sp PE

+EJB11

Low High Smoke Loss General PA Remote Spare


Gas Gas Alarm Of Fault SPEAKER Emergency
Alarm Alarm Pressure Shutdown

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
200 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 300

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 10.Feb.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Connection Layout EJB11 = CAB + ECP2 - 201
0 1 2 3 4 5 6 7 8 9

300U0 = PLug on IFM


SKTC1 = Connector IFM

-300U0
EX IFM CR7020
A1066396
A1056781
/300.0 CAN 1 CAN 1 CAN 2 CAN 2
/301.0 VBB s VBB o VBB r GND s GND o GND a GND RxD TxD ERROR TEST
/302.0
/303.0
H L H L
/304.0
/305.0

VBB s VBB o VBB r GND s GND o GND a GND RxD TxD ERROR TEST CAN 1 H CAN 1 L CAN 2 H CAN 2 L

SKTC1 23 05 34 01 15 12 33 06 07 13 24 14 32 26 25
/300.0
X24 23 05 34 01 15 12 33 06 07 13 24 14 32 26 25
11
-300K4
/300.3 12 14
24V / 300.4
+24Vdc-IFM TEST INPUT :
- NORMAL TO GROUND
- FOR SOFTWARE TO +12/24VDC
-300F0 2 -300F1 2 -300F2 2
IFM IFM IFM
VBB s VBB o CIRCUIT
2A 16A 10A
1 1 1 300.0 / 24V
EEx de EEx de EEx de
A1085712 A1085715 A1085714
A1079006 A1079006 A1079006 PLGA 1 2 4 4 5 6

-300P4 A
EEx nAnL
A1066395 1 2 3 4 5 6
A1061630
24VDC-E
A1061631

7 8 9 10 11 12
A
/300.5
PLGA 7 8

12 14
-101K3
A2 -300K4 /101.3 11
24VDC
EEx nC -300R4
0VDC-E A1 A1029768
120 Ohm
14 11 /300.5 EEx nA
12 A1065791

/31.0
A1043677
A1083957 X22 39 40 X22 41 42 X22 43 44
SKTC2 A B C D E

Ex e Ex e

W52 8 7 W111 15 16 +/21.8 5 6 W114


+/20.1 +/20.18 /200.9 +/21.8
/101.7
A1082447 A1082447
A1061895 A1068666
A1068665 A1061894
PLG2 B A SKT3 A B

CANH
+ECP4/300.5

CANL
+ECP4/300.5
Connections to: Connections to:
PWRP+ECP3 WNCH+ECP5
Interface page 300 page 300
Programming
(RS232)
CANBUS CANBUS CANBUS
TO TO TO
POWERPACK DASHBOARD WINCHFRAME
THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
201 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 301

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 23.Aug.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Safety controller EX = CAB + ECP2 - 300
0 1 2 3 4 5 6 7 8 9

EEx d EEx d
EEx e EEx e

-300U0 INPUT INPUT INPUT INPUT INPUT INPUT INPUT INPUT


/300.0

GAS GAS GAS


SMOKE AIR DOOR
SENSOR SENSOR SENSOR Spare Spare
SENSOR FLOW OPEN
CABIN AIR INLET SPARE

IX0.00 IW03 DI / AI IX0.01 IW04 DI / AI IX0.02 IW05 DI / AI IX0.03 IW06 DI / AI IX0.04 IW07 DI / AI IX0.05 IW08 DI / AI IX0.06 IW09 DI / AI IX0.07 IW10 DI / AI

SKTC1 08 27 09 28 10 29 11 30
/300.0
X24 08 27 09 28 10 29 11 30

24VDC-IFM A1080278 0VDC-E


820 Ohm
EEx nA
-301R5

1 2
-301U4
9167/11-11-00K
A1059897
10 11

+24VDC-IFM +24VDC-IFM +24VDC-IFM

0VDC-E 0VDC-E 0VDC-E

X22 45 46 X28 1 2 X22 47


EEx e EEx e
W103 1 2 3
+/20.14

+EJB14
EJB 110x75x55
A1070273 X142 1 2 3 4

W100 1 2 3 W101 1 2 3 W102 1 2 W104 BN BK GY W137 BN BK GY


+/20.13 +/20.13 +/20.14 +/20.14 +/20.15

24V GND SIG 24V GND SIG L1in com BN BK GY BN BK GY

-301R4
G G 2,2 kOhm
0,25W
L2 out
A1041982
-301S1 -301S2 -301S8 -301S9
Gas Gas -301S4 Door Door
Sensor Sensor Smoke Switch Switch
Cabin Air Inlet Sensor Left Right
A1108467 A1108467 A1062158 A1100133 A1100133
+/20.12 A1112992 +/20.14 +/20.14 +/20.15
+/20.13 GAS AIR Spare Spare
SENSOR EEx ia circuit FLOW
SPARE

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
300 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 302

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 23.Aug.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Safety controller Fire & gas = CAB + ECP2 - 301
0 1 2 3 4 5 6 7 8 9

+24VDC-IFM

21
-101Q0
/101.0
22

EEx d F 1 F 25 EEx d
EEx e EEx e
X24 20

SKTC1 20

-300U0 INPUT INPUT INPUT INPUT IX0.12 DI


INPUT INPUT INPUT
/300.0

CIRCULATION PRESSURIZING Manual Emergency Override


LOW HIGH
FAN Spare FAN Call Stop Zone 2
PRESSURE PRESSURE
OVERHEATED OVERHEATED Alarm Cabin Shutdown
IX0.11 DI 24VDC-E

QX0.00 DO/AO QX0.01 DO/AO QX0.02 DO/AO QX0.03 DO/AO IX0.13 DI IX0.14 DI IX0.15 DI
INPUT
SKTC1 44 45 46 47 02 21 38
/300.0
X24 44 45 +24VDC-IFM 46 47 02 21 38

+24VDC-IFM

0VDC-E

EM1 / 201.4
EM2 / 201.4
+ - 1 2 4 6
24V -302U0
9170/20-10-11K
10+ 11- A1080113 14+ 15-

+24VDC-IFM +24VDC-IFM

X28 3 4 5 6 7 8 X22 48 X22 49


EEx e EEx e

W105 1 2 W106 1 2 W107 1 2 W108 1 2 W109 1 2


+/20.15 +/20.16 +/20.16 +/20.17 +/20.17

1/2 BK
c nc no c nc no c nc no

P P P 3/4 GY

-302S6 -302S7
Manual Emergency
-302B0 -302B1 -302B2 Call Stop
50 Pa 50 Pa 50 Pa Point Cabin
A1035388 A1035388 Air Flow A1018115 A0021161
+/20.15 +/20.16 A1035388 +/20.17 +/20.17

+/20.16

Low Low Air Flow Spare PRESSURIZING Spare


Pressure Pressure FAN
EEx ia circuit OVERHEATED

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
301 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 303

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 25.Aug.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Safety controller Fire & gas = CAB + ECP2 - 302
0 1 2 3 4 5 6 7 8 9

GND GND

-303K2 -303K3
A2 24VDC A2 24VDC 9A 53
8501040875 A1082318 -100K4
A1042598 /100.4
A1 A1 54

1 2 /101.7
3 4 /200.5
1 2 /100.5 5 6
3 4 /100.5 13 14
5 6 /100.5 53 54 /200.1
7 8 /100.5 61 62
71 72
83 84 /200.3
EEx d F 2 3 4 5 6 EEx d
EEx e EEx e
X24 19
PA
+24VDC-IFM
303.2 SKTC1 19

-300U0 OUTPUT OUTPUT OUTPUT OUTPUT IX1.04 DI


INPUT INPUT INPUT
/300.0

GENERAL POWER SHUTDOWN VOLTAGE PURGE


Spare NORMAL MAINTENANCE
FAULT ACTIVATED ZONE 2 ERROR/OK OVERRIDE

QX0.04 DO/AO QX0.05 DO/AO QX0.06 DO/AO QX0.07 DO/AO IX1.05 DI IX1.06 DI IX1.07 DI
INPUT
SKTC1 36 54 17 53 55 18 37
/300.0
X24 36 X24 54 17 53 55 18 37
303.2
PA

-303H1 -303H2
A1 X1 X1
POWER
-303K1 General
Fault ACTIVATED
24VDC
LED 24V LED 24V
EEx nC A2 X2 X2
RD GN
A1029768
EEx-d EEx-d
A1048931 A1026947

-303S7 13 14
NORMAL
PURGE OVRR.
MAINTENANCE
EEx-d
A1101128

0VDC-E 0VDC-E +24VDC-IFM

X22 50 51
EEx e EEx e
14

12 11 /201.3

SAFETY SWITCH GENERAL POWER SHUTDOWN Spare VOLTAGE NORMAL PURGE MAINTENANCE
(PERFORATION ARMING) FAULT ACTIVATED ZONE 2 ERROR/OK OVERRIDE

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
302 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 304

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 25.Aug.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Safety controller Fire & gas = CAB + ECP2 - 303
0 1 2 3 4 5 6 7 8 9

EEx d EEx d
EEx e EEx e

-300U0 INPUT INPUT INPUT INPUT OUTPUT OUTPUT OUTPUT OUTPUT


/300.0

VOLTAGE LOSS
START STOP RESET
SEQUENCE SPARE SPARE SPARE OF
PRESSURIZING PRESSURIZING ALARM
ERROR PRESSURE

IX1.09 DI IX1.09 DI IX1.10 DI IX1.11 DI IX1.12 DI IX1.13 DI IX1.14 DI IX1.15 DI

SKTC1 39 03 40 22 41 42 43 04
/300.0
X24 39 03 40 22 41 42 43 04

13 21 13 -304K8 A1
24VDC
EEx nC
-304S1 14 -304S2 22 -304S3 14
A1029768 A2
START STOP RESET
PRESSURIZING PRESSURIZING ALARM 14
EEx-d EEx-d EEx-d
GN RD BK 12 11 /201.2
A1059770 A1059770 A1059770
A0021202 A0021202 A0021202

+24VDC-IFM +24VDC-IFM +24VDC-IFM +24VDC-IFM 0VDC-E

EEx e EEx e

START STOP RESET VOLTAGE SPARE SPARE SPARE LOSS


PRESSURIZING PRESSURIZING ALARM SEQUENCE OF
ERROR PRESSURE

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
303 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 305

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 09.Jun.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Safety controller Fire & gas = CAB + ECP2 - 304
0 1 2 3 4 5 6 7 8 9

0VDC-D

1 2 /101.0
-305K4 A2 3 4 /101.0
24VDC 17A
A1042092 5 6
A1

EEx d F 7 EEx d
EEx e EEx e
X24 50

SKTC1 50

-300U0 OUTPUT OUTPUT OUTPUT QX1.03 DO/AO


OUTPUT OUTPUT OUTPUT OUTPUT
/300.0

LOW HIGH OVER/


SMOKE FIRE & GAS FIRE
GAS GAS PRESSURE Spare Spare
ALARM ALARMS DAMPERS
ALARM ALARM FAN

QX1.00 DO/AO QX1.01 DO QX1.02 DO QX1.04 DO/AO QX1.05 DO QX1.06 DO QX1.07 DO/AO
OUTPUT
SKTC1 48 49 31 51 52 16 35
/300.0
X24 48 49 31 51 52 16 35

-305K1 A1 -305K2 A1 -305K3 A1


A1029768 A1029768 A1029768 0VDC-E
24VDC 24VDC 24VDC
EEx nC A2 EEx nC A2 EEx nC A2
A1029768 A1029768 A1029768

11 12
14 14 14 -305U5
MTL 5525
12 11 /201.1 12 11 /201.1 12 11 /201.2 A1094323
2 1

X28 9 10
0VDC-E 0VDC-E 0VDC-E

EEx e EEx e
W110 1 2
+/20.18

-305Z5 x1
24Vdc
A0005267
+/20.18 x2

LOW HIGH SMOKE OVER/ FIRE & GAS Spare Spare Spare
GAS GAS ALARM PRESSURE ALARMS
ALARM ALARM FAN EEx ia circuit
THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
304 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 1100

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 25.Aug.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Safety controller Fire & gas = CAB + ECP2 - 305
0 1 2 3 4 5 6 7 8 9

Terminal connectionlist

CABLE NAME

CABLE NAME
=CAB+ECP2-A
LINE BUSHING A JUNCTION BOX JB2

CABLETYPE

CONNECTION

TERMINAL

CONNECTION

CABLETYPE
FUNCTION CODE EXTERN CODE INTERN PAGE / COLOMN

Main Power Supply Shore 2x 110v 60Hz 125A =CAB+ECP2-X21 1 1 =CAB+ECP2-100F0 2 =CAB+ECP2/100.0

= =CAB+ECP2-X21 2 2 =CAB+ECP2-100F0 4 =CAB+ECP2/100.0

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
305 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 1101

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Terminalconnectionlist : =CAB+ECP2#-A LINE BUSHING A JUNCTION BOX JB2 = CAB + ECP2 - 1100
0 1 2 3 4 5 6 7 8 9

Terminal connectionlist

CABLE NAME

CABLE NAME
=CAB+ECP2-B
LINE BUSHING B JUNCTION BOX JB2

CABLETYPE

CONNECTION

TERMINAL

CONNECTION

CABLETYPE
FUNCTION CODE EXTERN CODE INTERN PAGE / COLOMN

Main Power Supply Shore 2x 110v 60Hz 125A =CAB+ECP2-X21 3 1 =CAB+ECP2-100F0 6 =CAB+ECP2/100.0

= =CAB+ECP2-X21 2 2 =CAB+ECP2-100F0 8 =CAB+ECP2/100.0

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
1100 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 1102

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Terminalconnectionlist : =CAB+ECP2#-B LINE BUSHING B JUNCTION BOX JB2 = CAB + ECP2 - 1101
0 1 2 3 4 5 6 7 8 9

Terminal connectionlist

CABLE NAME

CABLE NAME
=CAB+ECP2-C
LINE BUSHING C JUNCTION BOX JB2

CABLETYPE

CONNECTION

TERMINAL

CONNECTION

CABLETYPE
FUNCTION CODE EXTERN CODE INTERN PAGE / COLOMN

Main Power Supply Power Pack =CAB+ECP2-X21 4 1 =CAB+ECP2-303K2 2 =CAB+ECP2/100.5

= =CAB+ECP2-X21 5 2 =CAB+ECP2-303K2 4 =CAB+ECP2/100.5

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
1101 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 1103

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Terminalconnectionlist : =CAB+ECP2#-C LINE BUSHING C JUNCTION BOX JB2 = CAB + ECP2 - 1102
0 1 2 3 4 5 6 7 8 9

Terminal connectionlist

CABLE NAME

CABLE NAME
=CAB+ECP2-D
LINE BUSHING D JUNCTION BOX JB2

CABLETYPE

CONNECTION

TERMINAL

CONNECTION

CABLETYPE
FUNCTION CODE EXTERN CODE INTERN PAGE / COLOMN

To JB6 Non zone supply's =CAB+ECP2-X21 6 1 =CAB+ECP2-303K2 6 =CAB+ECP2/100.5

= =CAB+ECP2-X21 7 2 =CAB+ECP2-303K2 8 =CAB+ECP2/100.5

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
1102 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 1104

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Terminalconnectionlist : =CAB+ECP2#-D LINE BUSHING D JUNCTION BOX JB2 = CAB + ECP2 - 1103
0 1 2 3 4 5 6 7 8 9

Terminal connectionlist

CABLE NAME

CABLE NAME
=CAB+ECP2-E
LINE BUSHING H JUNCTION BOX JB2

CABLETYPE

CONNECTION

TERMINAL

CONNECTION

CABLETYPE
FUNCTION CODE EXTERN CODE INTERN PAGE / COLOMN

Main Power Supply Shore 2x 110v 60Hz 125A =CAB+ECP2-X21 PE PE =CAB+ECP2/100.1

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
1103 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 1105

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Terminalconnectionlist : =CAB+ECP2#-E LINE BUSHING H JUNCTION BOX JB2 = CAB + ECP2 - 1104
0 1 2 3 4 5 6 7 8 9

Terminal connectionlist

CABLE NAME

CABLE NAME
=CAB+ECP2-F
LINE BUSHING F JUNCTION BOX JB2

CABLETYPE

CONNECTION

TERMINAL

CONNECTION

CABLETYPE
FUNCTION CODE EXTERN CODE INTERN PAGE / COLOMN

PRESSURIZING FAN OVERHEATED =CAB+ECP2-X24 20 1 =CAB+ECP2-101Q0 22 =CAB+ECP2/302.5

SAFETY SWITCH (PERFORATION ARMING) =CAB+ECP2-X22 50 2 =CAB+ECP2-303K2 A1 =CAB+ECP2/303.0

= =CAB+ECP2-X22 51 3 =CAB+ECP2/303.0

GENERAL FAULT =CAB+ECP2-303H2 X1 4 =CAB+ECP2-303K3 A1 =CAB+ECP2/303.2

Spare =CAB+ECP2-X22 + 5 =CAB+ECP2-100K4 53 =CAB+ECP2/303.4

VOLTAGE ERROR/OK =CAB+ECP2-X24 19 6 =CAB+ECP2-100K4 54 =CAB+ECP2/303.5

OVER/ PRESSURE FAN =CAB+ECP2-X24 50 7 =CAB+ECP2-305K4 A1 =CAB+ECP2/305.4

=CAB+ECP2-200F5 2 8 =CAB+ECP2-303K3 4 =CAB+ECP2/200.5

=CAB+ECP2-X22 14 9 =CAB+ECP2-303K3 3 =CAB+ECP2/200.6

=CAB+ECP2-X22 15 10 =CAB+ECP2-200K6 85 =CAB+ECP2/200.6

=CAB+ECP2-X22 17 11 =CAB+ECP2-200K6 87a =CAB+ECP2/200.7

=CAB+ECP2-X22 18 12 =CAB+ECP2-200K6 30 =CAB+ECP2/200.7

=CAB+ECP2-X26 + 13 =CAB+ECP2-200G0 12V =CAB+ECP2/200.0

=CAB+ECP2-X22 - 14 =CAB+ECP2-200G0 0V =CAB+ECP2/200.1

Cabin light Switch 1 =CAB+ECP2-102F0.1 1 15 =CAB+ECP2-102F0 2 =CAB+ECP2/102.0

= =CAB+ECP2-X21 15 16 =CAB+ECP2-102F0 N. =CAB+ECP2/102.1

Dashboard Light =CAB+ECP2-102F5 1 17 =CAB+ECP2-200F0 2 =CAB+ECP2/102.5

= =CAB+ECP2-102S5 3 18 =CAB+ECP2-200F0 4 =CAB+ECP2/102.5

Main Power Supply Power Pack =CAB+ECP2-100H3 19 =CAB+ECP2-100K2 12 =CAB+ECP2/100.3

= =CAB+ECP2-100H3 20 =CAB+ECP2-100K2 A2 =CAB+ECP2/100.3

=CAB+ECP2-X22 13 21 =CAB+ECP2-303K3 54 =CAB+ECP2/200.1

=CAB+ECP2-200F3 1 22 =CAB+ECP2-303K3 84 =CAB+ECP2/200.3

Supply Winch =CAB+ECP2-X22 9 23 =CAB+ECP2-303K3 2 =CAB+ECP2/101.7

Handheld =CAB+ECP2-101F8 2 24 =CAB+ECP2-303K3 1 =CAB+ECP2/101.8

Spare =CAB+ECP2-X22 + 25 =CAB+ECP2-X22 + =CAB+ECP2/302.9

=CAB+ECP2-SPARE sp 26 =CAB+ECP2/40.0

=CAB+ECP2-SPARE sp 27 =CAB+ECP2/40.0

=CAB+ECP2-SPARE sp 28 =CAB+ECP2/40.0

=CAB+ECP2-SPARE sp 29 =CAB+ECP2/40.1

=CAB+ECP2-SPARE sp 30 =CAB+ECP2/40.1

=CAB+ECP2-SPARE sp 31 =CAB+ECP2/40.1

=CAB+ECP2-SPARE sp 32 =CAB+ECP2/40.1

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
1104 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 1106

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Terminalconnectionlist : =CAB+ECP2#-F LINE BUSHING F JUNCTION BOX JB2 = CAB + ECP2 - 1105
0 1 2 3 4 5 6 7 8 9

Terminal connectionlist

CABLE NAME

CABLE NAME
=CAB+ECP2-G
LINE BUSHING G JUNCTION BOX JB2

CABLETYPE

CONNECTION

TERMINAL

CONNECTION

CABLETYPE
FUNCTION CODE EXTERN CODE INTERN PAGE / COLOMN

Pressurising Fan =CAB+ECP2-101F2.1 1 1 =CAB+ECP2-101G2 24V =CAB+ECP2/101.2

Auxiliary Cabin 24VDC Supply =CAB+ECP2-X22 4 2 =CAB+ECP2-101G2 0V =CAB+ECP2/101.2

= =CAB+ECP2-X22 PE 3 =CAB+ECP2/101.2

= =CAB+ECP2-X22 + 4 =CAB+ECP2-X22 +:+ =CAB+ECP2/101.3

= =CAB+ECP2-X22 - 5 =CAB+ECP2-X22 -:+ =CAB+ECP2/101.4

=CAB+ECP2-SPARE sp 6 =CAB+ECP2/40.0

=CAB+ECP2-SPARE sp 7 =CAB+ECP2/40.0

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
1105 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 1107

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Terminalconnectionlist : =CAB+ECP2#-G LINE BUSHING G JUNCTION BOX JB2 = CAB + ECP2 - 1106
0 1 2 3 4 5 6 7 8 9

Terminal connectionlist

CABLE NAME

CABLE NAME
=CAB+ECP2-H
LINE BUSHING H JUNCTION BOX JB2

CABLETYPE

CONNECTION

TERMINAL

CONNECTION

CABLETYPE
FUNCTION CODE EXTERN CODE INTERN PAGE / COLOMN

Pressurising Fan =CAB+ECP2-X21 8 1 =CAB+ECP2-305K4 2 =CAB+ECP2/101.0

= =CAB+ECP2-X21 9 2 =CAB+ECP2-305K4 4 =CAB+ECP2/101.0

=CAB+ECP2-SPARE sp 3 =CAB+ECP2/40.0

=CAB+ECP2-SPARE sp 4 =CAB+ECP2/40.0

=CAB+ECP2-SPARE sp 5 =CAB+ECP2/40.0

=CAB+ECP2-SPARE sp 6 =CAB+ECP2/40.1

=CAB+ECP2-SPARE sp PE =CAB+ECP2/40.1

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
1106 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 1108

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Terminalconnectionlist : =CAB+ECP2#-H LINE BUSHING H JUNCTION BOX JB2 = CAB + ECP2 - 1107
0 1 2 3 4 5 6 7 8 9

Terminal connectionlist

CABLE NAME

CABLE NAME
=CAB+ECP2-I
LINE BUSHING I JUNCTION BOX JB2

CABLETYPE

CONNECTION

TERMINAL

CONNECTION

CABLETYPE
FUNCTION CODE EXTERN CODE INTERN PAGE / COLOMN

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
1107 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 1109

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Terminalconnectionlist : =CAB+ECP2#-I LINE BUSHING I JUNCTION BOX JB2 = CAB + ECP2 - 1108
0 1 2 3 4 5 6 7 8 9

Terminal connectionlist

CABLE NAME

CABLE NAME
=CAB+ECP2-SPARE
TERMINAL STRIP SPARE JUNCTION BOX JB2

CABLETYPE

CONNECTION

TERMINAL

CONNECTION

CABLETYPE
FUNCTION CODE EXTERN CODE INTERN PAGE / COLOMN

sp =CAB+ECP2-F 26 =CAB+ECP2/40.0

sp =CAB+ECP2-G 6 =CAB+ECP2/40.0

sp =CAB+ECP2-H 3 =CAB+ECP2/40.0

sp =CAB+ECP2-F 27 =CAB+ECP2/40.0

sp =CAB+ECP2-G 7 =CAB+ECP2/40.0

sp =CAB+ECP2-H 4 =CAB+ECP2/40.0

sp =CAB+ECP2-F 28 =CAB+ECP2/40.0

sp =CAB+ECP2-H 5 =CAB+ECP2/40.0

sp =CAB+ECP2-F 29 =CAB+ECP2/40.1

sp =CAB+ECP2-H 6 =CAB+ECP2/40.1

sp =CAB+ECP2-F 30 =CAB+ECP2/40.1

sp =CAB+ECP2-H PE =CAB+ECP2/40.1

sp =CAB+ECP2-F 31 =CAB+ECP2/40.1

sp =CAB+ECP2-F 32 =CAB+ECP2/40.1

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
1108 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 1110

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Terminalconnectionlist : =CAB+ECP2#-SPARE TERMINAL STRIP SPARE JUNCTION = CAB + ECP2 - 1109
0 1 2 3 4 5 6 7 8 9

Terminal connectionlist

=CAB-W73

=CAB-W72

=CAB-W71

=CAB-W70

=CAB-W69

=CAB-W136

=CAB-W53

=CAB-W50

CABLE NAME

CABLE NAME

=CAB-W71
=CAB+ECP2-X21
TERMINAL STRIP X21 CONTROL PANEL JB2 (230VAC)

RADOX 7x2,5 mm²

RADOX 3x2,5 mm²

RADOX 5x2,5 mm²

RADOX 5x2,5 mm²

RADOX 3x1,5 mm²

RADOX 4x10 mm²

Radox 5x25 mm²

RADOX 4x25 mm²

CABLETYPE

CONNECTION

TERMINAL

CONNECTION

CABLETYPE

RADOX 5x2,5 mm²


FUNCTION CODE EXTERN CODE INTERN PAGE / COLOMN

Main Power Supply Shore 2x 110v 60Hz 125A 1 =CAB+-PLG1 1 1 =CAB+ECP2-A 1 =CAB+ECP2/100.0

= 2 =CAB+-PLG1 2 2 =CAB+ECP2-A 2 =CAB+ECP2/100.0

= 3 =CAB+-PLG1 3 3 =CAB+ECP2-B 1 =CAB+ECP2/100.0

= 4 =CAB+-PLG1 4 PE =CAB+ECP2-E PE =CAB+ECP2/100.1

Main Power Supply Power Pack 1 =CAB+ECP6-X61 1 4 =CAB+ECP2-C 1 =CAB+ECP2/100.5

= 1 =CAB+ECP6-X61 21 4 =CAB+ECP2/100.5

= 2 =CAB+ECP6-X61 2 5 =CAB+ECP2-C 2 =CAB+ECP2/100.5

To JB6 Non zone supply's 2 =CAB+ECP6-X61 22 5 =CAB+ECP2/100.5

= 3 =CAB+ECP6-X61 3 6 =CAB+ECP2-D 1 =CAB+ECP2/100.5

= 3 =CAB+ECP6-X61 23 6 =CAB+ECP2/100.5

= 4 =CAB+ECP6-X61 4 7 =CAB+ECP2-D 2 =CAB+ECP2/100.5

= 4 =CAB+ECP6-X61 24 7 =CAB+ECP2/100.5

= SH =CAB+ECP6-X61 PE PE =CAB+ECP2/100.5

= SH =CAB+ECP6-X61 PE PE =CAB+ECP2/100.6

Pressurising Fan 1 =CAB+-101M0 L 8 =CAB+ECP2-H 1 =CAB+ECP2/101.0

= 2 =CAB+-101M0 N 9 =CAB+ECP2-H 2 =CAB+ECP2/101.0

= 3 =CAB+-101M0 PE PE =CAB+ECP2/101.1

Cabin light Switch 1 1 =CAB+-102S0 11 10 =CAB+ECP2-102F0.1 2 =CAB+ECP2/102.0

= 2 =CAB+-102S0 14 11 =CAB+-102S1 12 2 =CAB+ECP2/102.1

= 3 =CAB+-102S0 12 12 =CAB+-102S1 14 3 =CAB+ECP2/102.1

Cabin light Switch 2 1 =CAB+-102S1 11 13 =CAB+ECP2/102.2

= 1 =CAB+-102H2 14 =CAB+ECP2/102.2

= 2 =CAB+-102H2 15 =CAB+ECP2-F 16 =CAB+ECP2/102.2

Cabin light 3 =CAB+-102H2 PE =CAB+ECP2/102.2

Dashboard Light 1 =CAB+-102H3 L1 16 =CAB+ECP2-102S3 2 =CAB+ECP2/102.3

= 2 =CAB+-102H3 N 17 =CAB+ECP2-X21 15 =CAB+ECP2/102.4

= 3 =CAB+-102H3 2 18 =CAB+ECP2-102S3 4 =CAB+ECP2/102.4

= 4 =CAB+-102H3 3 19 =CAB+ECP2-102S3 3 =CAB+ECP2/102.4

= 5 =CAB+-102H3 L 20 =CAB+ECP2-102S3 1 =CAB+ECP2/102.4

= 7 =CAB+-102H3 PE PE =CAB+ECP2/102.4

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
1109 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 1111

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Terminalconnectionlist : =CAB+ECP2#-X21 TERMINAL STRIP X21 CONTROL = CAB + ECP2 - 1110
0 1 2 3 4 5 6 7 8 9

Terminal connectionlist

=CAB-W52

=CAB-W113

CABLE NAME

CABLE NAME
=CAB+ECP2-X21
TERMINAL STRIP X21 CONTROL PANEL JB2 (230VAC)

RADOX 18x1,5 mm²

RADOX 5x2,5 mm²

CABLETYPE

CONNECTION

TERMINAL

CONNECTION

CABLETYPE
FUNCTION CODE EXTERN CODE INTERN PAGE / COLOMN

Dashboard Light 1 =CAB+-SKT4 B 21 =CAB+ECP2-102S5 2 =CAB+ECP2/102.5

= 2 =CAB+-SKT4 C 22 =CAB+ECP2-102S5 4 =CAB+ECP2/102.5

= 5 =CAB+-SKT4 F 25 =CAB+ECP2/102.5

= 3 =CAB+-SKT4 D 23 =CAB+ECP2-102S8 2 =CAB+ECP2/102.8

= 4 =CAB+-SKT4 E 24 =CAB+ECP2-102S8 4 =CAB+ECP2/102.8

L1-ECP2 =CAB+ECP2-200F0 1 =CAB+ECP2/200.9

L2-ECP2 =CAB+ECP2-200F0 3 =CAB+ECP2/200.9

N1-ECP2 =CAB+ECP2-102F0 N =CAB+ECP2/200.9

N2-ECP2 =CAB+ECP2-100F8 4 =CAB+ECP2/200.9

Dashboard Light 10 =CAB+-PLG2 D SP =CAB+ECP2/102.8

= 11 =CAB+-PLG2 E SP =CAB+ECP2/102.9

= 12 =CAB+-PLG2 F SP =CAB+ECP2/102.9

= 13 =CAB+-PLG2 G SP =CAB+ECP2/102.9

= 14 =CAB+-PLG2 H SP =CAB+ECP2/102.9

= 15 =CAB+-PLG2 J SP =CAB+ECP2/102.9

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
1110 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 1112

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Terminalconnectionlist : =CAB+ECP2#-X21 TERMINAL STRIP X21 CONTROL = CAB + ECP2 - 1111
0 1 2 3 4 5 6 7 8 9

Terminal connectionlist

=CAB-W114

=CAB-W111

=CAB-W51

=CAB-W52

CABLE NAME

CABLE NAME
=CAB+ECP2-X22
TERMINAL STRIP X22 CONTROL PANEL JB2 (24VDC)

RADOX 12x1,5 mm²

RADOX 25x1,5 mm²

RADOX 5x2,5 mm²

RADOX 18x1,5 mm²

CABLETYPE

CONNECTION

TERMINAL

CONNECTION

CABLETYPE
FUNCTION CODE EXTERN CODE INTERN PAGE / COLOMN

Auxiliary Cabin 24VDC Supply 9 =CAB+-PLG2 C 1 =CAB+ECP2/101.4

= 1 =CAB+-PLG2 R 1 =CAB+ECP2-101F4 1 =CAB+ECP2/101.4

= 2 =CAB+-PLG2 R 1 =CAB+ECP2/101.4

= 3 =CAB+-PLG2 R 1 =CAB+ECP2/101.4

= 4 =CAB+-PLG2 P 2 =CAB+ECP2-X22 2 =CAB+ECP2/101.4

= - =CAB+ECP2/101.4

= 5 =CAB+-PLG2 P 2 =CAB+ECP2-X22 2 =CAB+ECP2/101.4

= - =CAB+ECP2/101.4

= - =CAB+ECP2-101H5 X2 =CAB+ECP2/101.4

= - =CAB+ECP2-G 5 =CAB+ECP2/101.4

= - =CAB+ECP2-G 5 =CAB+ECP2/101.4

= - =CAB+ECP2/101.4

= - =CAB+ECP2-X22 2 =CAB+ECP2/101.4

= 6 =CAB+-PLG2 P 2 =CAB+ECP2-X22 -:+ =CAB+ECP2/101.4

= - =CAB+ECP2/101.5

= - =CAB+ECP2/101.5

= - =CAB+ECP2/101.5

= - =CAB+ECP2/101.5

= - =CAB+ECP2/101.5

= - =CAB+ECP2/101.5

Pressurising Fan 1 =CAB+-SKT6 3 =CAB+ECP2-101F2.1 2 =CAB+ECP2/101.2

= 2 =CAB+-SKT6 2 3 =CAB+ECP2/101.2

Auxiliary Cabin 24VDC Supply 3 =CAB+-SKT6 3 4 =CAB+ECP2-G 2 =CAB+ECP2/101.2

= 4 =CAB+-SKT6 4 4 =CAB+ECP2/101.2

= PE =CAB+ECP2-101G2 0V =CAB+ECP2/101.2

= PE =CAB+ECP2-G 3 =CAB+ECP2/101.2

= 1 =CAB+ECP4-X42 +:+ 5 =CAB+ECP2-101F5 2 =CAB+ECP2/101.6

= 2 =CAB+ECP4-X42 +:+ 5 =CAB+ECP2/101.6

Supply JB4 - =CAB+ECP2/101.6

= 3 =CAB+ECP4-X42 - 6 =CAB+ECP2/101.6

= 4 =CAB+ECP4-X42 - 6 =CAB+ECP2/101.6

= PE =CAB+ECP2/101.6

= =CAB+ECP2-101F7 1 + =CAB+ECP2/101.7

= 1 =CAB+-SKT3 R 7 =CAB+ECP2-101F7 2 =CAB+ECP2/101.7

Supply Winch 2 =CAB+-SKT3 R 7 =CAB+ECP2/101.7

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
1111 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 1113

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Terminalconnectionlist : =CAB+ECP2#-X22 TERMINAL STRIP X22 CONTROL = CAB + ECP2 - 1112
0 1 2 3 4 5 6 7 8 9

Terminal connectionlist

=CAB-W112

=CAB-W135

=CAB-W111

=CAB-W115

=CAB-W114

CABLE NAME

CABLE NAME

=CAB-W116

=CAB-W114
=CAB+ECP2-X22
TERMINAL STRIP X22 CONTROL PANEL JB2 (24VDC)

RADOX 25x1,5 mm²

RADOX 5x1,5 mm²

RADOX 25x1,5 mm²

RADOX 5x2,5 mm²

RADOX 12x1,5 mm²

CABLETYPE

CONNECTION

TERMINAL

CONNECTION

CABLETYPE

RADOX 3x2,5 mm²

RADOX 12x1,5 mm²


FUNCTION CODE EXTERN CODE INTERN PAGE / COLOMN

Supply Winch - =CAB+ECP2/101.7

= 3 =CAB+-SKT3 P 8 =CAB+ECP2/101.7

= 4 =CAB+-SKT3 P 8 =CAB+ECP2/101.7

= 1 =CAB+-101A8 9 =CAB+ECP2-F 23 =CAB+ECP2/101.7

= - =CAB+ECP2/101.8

= 2 =CAB+-101A8 10 =CAB+ECP2/101.8

= 3 =CAB+-101A8 11 =CAB+-SKT57 A 1 =CAB+ECP2/101.8

= 4 =CAB+-101A8 12 =CAB+-SKT57 B 2 =CAB+ECP2/101.8

Handheld + =CAB+ECP2-101F8 1 =CAB+ECP2/101.8

8 =CAB+ECP4-X42 7 13 =CAB+ECP2-F 21 =CAB+ECP2/200.1

11 =CAB+ECP4-X42 14 14 =CAB+ECP2-F 9 =CAB+ECP2/200.6

=CAB+ECP2-200K6 86 - =CAB+ECP2/200.6

12 =CAB+ECP4-X42 15 15 =CAB+ECP2-F 10 =CAB+ECP2/200.6

1 =CAB+-104M2 WH 16 =CAB+ECP2-X22 14 =CAB+ECP2/200.7

2 =CAB+-104M2 BK - =CAB+ECP2/200.7

3 =CAB+-104M2 BK/WH 17 =CAB+ECP2-F 11 =CAB+ECP2/200.7

4 =CAB+-104M2 YE 18 =CAB+ECP2-F 12 =CAB+ECP2/200.7

5 =CAB+-104M2 GY PE =CAB+ECP2/200.7

13 =CAB+ECP4-X42 13 19 =CAB+-SKT3 C 7 =CAB+ECP2/200.8

14 =CAB+ECP4-X42 20 20 =CAB+-SKT3 E 9 =CAB+ECP2/200.9

Low Gas Alarm 1 =CAB+EJB11-X112 49 21 =CAB+ECP2-305K1 11 =CAB+ECP2/201.0

= 2 =CAB+EJB11-X112 50 22 =CAB+ECP2-305K1 12 =CAB+ECP2/201.1

= 3 =CAB+EJB11-X112 51 23 =CAB+ECP2-305K1 14 =CAB+ECP2/201.1

High Gas Alarm 4 =CAB+EJB11-X112 52 24 =CAB+ECP2-305K2 11 =CAB+ECP2/201.1

= 5 =CAB+EJB11-X112 53 25 =CAB+ECP2-305K2 12 =CAB+ECP2/201.1

= 6 =CAB+EJB11-X112 54 26 =CAB+ECP2-305K2 14 =CAB+ECP2/201.1

Smoke Alarm 7 =CAB+EJB11-X112 55 27 =CAB+ECP2-305K3 11 =CAB+ECP2/201.2

= 8 =CAB+EJB11-X112 56 28 =CAB+ECP2-305K3 12 =CAB+ECP2/201.2

= 9 =CAB+EJB11-X112 57 29 =CAB+ECP2-305K3 14 =CAB+ECP2/201.2

Loss Of Pressure 10 =CAB+EJB11-X112 58 30 =CAB+ECP2-304K8 11 =CAB+ECP2/201.2

= 11 =CAB+EJB11-X112 59 31 =CAB+ECP2-304K8 12 =CAB+ECP2/201.2

= 12 =CAB+EJB11-X112 60 32 =CAB+ECP2-304K8 14 =CAB+ECP2/201.3

General Fault 13 =CAB+EJB11-X112 61 33 =CAB+ECP2-303K1 11 =CAB+ECP2/201.3

= 14 =CAB+EJB11-X112 62 34 =CAB+ECP2-303K1 12 =CAB+ECP2/201.3

= 15 =CAB+EJB11-X112 63 35 =CAB+ECP2-303K1 14 =CAB+ECP2/201.3

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
1112 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 1114

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Terminalconnectionlist : =CAB+ECP2#-X22 TERMINAL STRIP X22 CONTROL = CAB + ECP2 - 1113
0 1 2 3 4 5 6 7 8 9

Terminal connectionlist

=CAB-W100

=CAB-W114

=CAB-W111

=CAB-W52

=CAB-W112

CABLE NAME

CABLE NAME
=CAB+ECP2-X22
TERMINAL STRIP X22 CONTROL PANEL JB2 (24VDC)

RADOX 3x1 mm²

RADOX 12x1,5 mm²

RADOX 25x1,5 mm²

RADOX 18x1,5 mm²

RADOX 25x1,5 mm²

CABLETYPE

CONNECTION

TERMINAL

CONNECTION

CABLETYPE
FUNCTION CODE EXTERN CODE INTERN PAGE / COLOMN

PA SPEAKER 16 =CAB+EJB11-X112 64 36 =CAB+ECP2/201.4

= 17 =CAB+EJB11-X112 65 sp =CAB+ECP2/201.4

Remote Emergency Shutdown 18 =CAB+EJB11-X112 66 37 =CAB+ECP2-X24 21 =CAB+ECP2/201.4

= 19 =CAB+EJB11-X112 67 38 =CAB+ECP2-X22 49 =CAB+ECP2/201.4

= 20 =CAB+EJB11-X112 sp sp =CAB+ECP2/201.5

= 21 =CAB+EJB11-X112 sp sp =CAB+ECP2/201.5

= 22 =CAB+EJB11-X112 sp sp =CAB+ECP2/201.5

Spare 23 =CAB+EJB11-X112 sp sp =CAB+ECP2/201.5

= 24 =CAB+EJB11-X112 sp sp =CAB+ECP2/201.5

= 25 =CAB+EJB11-X112 PE PE =CAB+ECP2/201.5

+12/24VDC SUPPLY SENSORS AND MODULE + =CAB+ECP2-300F0 1 =CAB+ECP2/300.0

+12/24VDC SUPPLY VIA RELAY - =CAB+ECP2/300.2

0VDC GROUD SEN-SORS AND MODULE - =CAB+ECP2-X24 01 =CAB+ECP2/300.2

= - =CAB+ECP2/300.2

= - =CAB+ECP2-X24 15 =CAB+ECP2/300.2

= - =CAB+ECP2/300.2

= - =CAB+ECP2-X24 12 =CAB+ECP2/300.2

= - =CAB+ECP2/300.2

= - =CAB+ECP2-X24 33 =CAB+ECP2/300.2

= - =CAB+ECP2/300.2

= - =CAB+ECP2-300K4 12 =CAB+ECP2/300.2

= - =CAB+ECP2/300.2

0VDC GROUD OUTPUTS - =CAB+ECP2-PLGA 1 =CAB+ECP2/300.2

= - =CAB+ECP2/300.2

= - =CAB+ECP2-300K4 A2 =CAB+ECP2/300.2

= - =CAB+ECP2/300.2

= - =CAB+ECP2-SKTC2 C =CAB+ECP2/300.2

0VDC GROUND ANALOGUE OUTPUTS 8 =CAB+-PLG2 B 39 =CAB+ECP2-PLGA 7 =CAB+ECP2/300.5

CANBUS TO POWERPACK 7 =CAB+-PLG2 A 40 =CAB+ECP2-PLGA 8 =CAB+ECP2/300.5

= 15 =CAB+ECP4-X42 16 41 =CAB+ECP2-X24 14 =CAB+ECP2/300.6

CANBUS TO DASHBOARD 16 =CAB+ECP4-X42 17 42 =CAB+ECP2-X24 32 =CAB+ECP2/300.6

= 5 =CAB+-SKT3 A 43 =CAB+ECP2-X24 26 =CAB+ECP2/300.9

CANBUS TO WINCHFRAME 6 =CAB+-SKT3 B 44 =CAB+ECP2-X24 25 =CAB+ECP2/300.9

1 =CAB+-301S1 24V + =CAB+ECP2/301.1

2 =CAB+-301S1 GND - =CAB+ECP2/301.1

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
1113 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 1115

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Terminalconnectionlist : =CAB+ECP2#-X22 TERMINAL STRIP X22 CONTROL = CAB + ECP2 - 1114
0 1 2 3 4 5 6 7 8 9

Terminal connectionlist

=CAB-W109

=CAB-W108

=CAB-W103

=CAB-W101

=CAB-W100

CABLE NAME

CABLE NAME
=CAB+ECP2-X22
TERMINAL STRIP X22 CONTROL PANEL JB2 (24VDC)

RADOX 3x1 mm²

RADOX 3x1 mm²

RADOX 3x1 mm²

RADOX 3x1 mm²

RADOX 3x1 mm²

CABLETYPE

CONNECTION

TERMINAL

CONNECTION

CABLETYPE
FUNCTION CODE EXTERN CODE INTERN PAGE / COLOMN

GAS SENSOR CABIN 3 =CAB+-301S1 SIG 45 =CAB+ECP2-X24 08 =CAB+ECP2/301.1

= 1 =CAB+-301S2 24V + =CAB+ECP2/301.2

= 2 =CAB+-301S2 GND - =CAB+ECP2/301.2

GAS SENSOR AIR INLET 3 =CAB+-301S2 SIG 46 =CAB+ECP2-X24 27 =CAB+ECP2/301.2

GAS SENSOR SPARE =CAB+ECP2-301U4 1 + =CAB+ECP2/301.4

SMOKE SENSOR =CAB+ECP2-301R5 - =CAB+ECP2/301.5

Spare 1 =CAB+EJB14-X142 1 + =CAB+ECP2/301.8

DOOR OPEN 2 =CAB+EJB14-X142 4 47 =CAB+ECP2-X24 30 =CAB+ECP2/301.8

= 3 =CAB+EJB14-X142 3 - =CAB+ECP2/301.8

Low Pressure =CAB+ECP2-302U0 + + =CAB+ECP2/302.0

= =CAB+ECP2-302U0 - - =CAB+ECP2/302.1

HIGH PRESSURE =CAB+ECP2-X24 46 + =CAB+ECP2/302.3

PRESSURIZING FAN OVERHEATED =CAB+ECP2-101Q0 21 + =CAB+ECP2/302.5

=CAB+ECP2-F

PRESSURIZING FAN OVERHEATED 1 =CAB+-302S6 1/2 + =CAB+ECP2/302.6

Manual Call Alarm 2 =CAB+-302S6 3/4 48 =CAB+ECP2-X24 02 =CAB+ECP2/302.6

= 1 =CAB+-302S7 BK + =CAB+ECP2/302.7

Emergency Stop Cabin 2 =CAB+-302S7 GY 49 =CAB+ECP2-X22 38 =CAB+ECP2/302.7

+24VDC-IFM + =CAB+ECP2-F 25 =CAB+ECP2/302.9

SAFETY SWITCH (PERFORATION ARMING) 50 =CAB+ECP2-F 2 =CAB+ECP2/303.0

= 51 =CAB+ECP2-F 3 =CAB+ECP2/303.0

GENERAL FAULT - =CAB+ECP2-303H1 X2 =CAB+ECP2/303.1

POWER ACTIVATED - =CAB+ECP2-303H2 X2 =CAB+ECP2/303.2

Spare + =CAB+ECP2-F 5 =CAB+ECP2/303.4

PURGE OVERRIDE + =CAB+ECP2-303S7 =CAB+ECP2/303.7

START PRESSURIZING + =CAB+ECP2-304S1 14 =CAB+ECP2/304.1

STOP PRESSURIZING + =CAB+ECP2-304S2 22 =CAB+ECP2/304.2

RESET ALARM + =CAB+ECP2-304S3 14 =CAB+ECP2/304.3

VOLTAGE SEQUENCE ERROR + =CAB+ECP2-X24 22 =CAB+ECP2/304.4

LOSS OF PRESSURE - =CAB+ECP2-304K8 A2 =CAB+ECP2/304.8

LOW GAS ALARM - =CAB+ECP2-305K1 A2 =CAB+ECP2/305.1

HIGH GAS ALARM - =CAB+ECP2-305K2 A2 =CAB+ECP2/305.2

SMOKE ALARM - =CAB+ECP2-305K3 A2 =CAB+ECP2/305.3

OVER/ PRESSURE FAN =CAB+ECP2-305K4 A2 - =CAB+ECP2/305.4

FIRE & GAS ALARMS =CAB+ECP2-305U5 11 - =CAB+ECP2/305.5

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
1114 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 1116

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Terminalconnectionlist : =CAB+ECP2#-X22 TERMINAL STRIP X22 CONTROL = CAB + ECP2 - 1115
0 1 2 3 4 5 6 7 8 9

Terminal connectionlist

=CAB-W111

=CAB-W52

CABLE NAME

CABLE NAME
=CAB+ECP2-X22
TERMINAL STRIP X22 CONTROL PANEL JB2 (24VDC)

RADOX 25x1,5 mm²

RADOX 18x1,5 mm²

CABLETYPE

CONNECTION

TERMINAL

CONNECTION

CABLETYPE
FUNCTION CODE EXTERN CODE INTERN PAGE / COLOMN

- =CAB+ECP2/200.0

- =CAB+ECP2-X26 2 =CAB+ECP2/200.1

- =CAB+ECP2-F 14 =CAB+ECP2/200.1

=CAB+ECP2-303K3 53 + =CAB+ECP2/200.1

Auxiliary Cabin 24VDC Supply =CAB+-SKT6 SP SP =CAB+ECP2/101.2

= + =CAB+ECP2/101.3

= + =CAB+ECP2/101.3

= + =CAB+ECP2/101.3

= + =CAB+ECP2-G 4 =CAB+ECP2/101.3

= + =CAB+ECP2-G 4 =CAB+ECP2/101.3

= + =CAB+ECP2/101.3

= + =CAB+ECP2-101D3 2 =CAB+ECP2/101.3

= + =CAB+ECP2/101.3

= + =CAB+ECP2/101.3

= + =CAB+ECP2/101.3

= + =CAB+ECP2/101.3

= + =CAB+ECP2/101.3

= + =CAB+ECP2/101.3

= + =CAB+ECP2/101.3

= + =CAB+ECP2/101.3

= + =CAB+ECP2-101D4 2 =CAB+ECP2/101.3

= 16 =CAB+-PLG2 Y SP =CAB+ECP2/101.5

= - =CAB+ECP2/101.5

= - =CAB+ECP2/101.5

= - =CAB+ECP2/101.5

= - =CAB+ECP2/101.5

= - =CAB+ECP2/101.5

= 17 =CAB+-PLG2 K SP =CAB+ECP2/101.5

= 18 =CAB+-PLG2 T PE =CAB+ECP2/101.5

= IS =CAB+ECP2/101.5

= =CAB+ECP2-101F5 1 + =CAB+ECP2/101.6

9 =CAB+ECP4-X42 SP SP =CAB+ECP2/200.2

10 =CAB+ECP4-X42 - - =CAB+ECP2/200.2

+ =CAB+ECP2-200F5 1 =CAB+ECP2/200.5

Auxiliary Cabin 24VDC Supply =CAB+ECP2/101.3

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
1115 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 1117

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Terminalconnectionlist : =CAB+ECP2#-X22 TERMINAL STRIP X22 CONTROL = CAB + ECP2 - 1116
0 1 2 3 4 5 6 7 8 9

Terminal connectionlist

CABLE NAME

CABLE NAME
=CAB+ECP2-X22
TERMINAL STRIP X22 CONTROL PANEL JB2 (24VDC)

CABLETYPE

CONNECTION

TERMINAL

CONNECTION

CABLETYPE
FUNCTION CODE EXTERN CODE INTERN PAGE / COLOMN

Auxiliary Cabin 24VDC Supply =CAB+ECP2-101H5 X1 =CAB+ECP2/101.3

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
1116 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 1118

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Terminalconnectionlist : =CAB+ECP2#-X22 TERMINAL STRIP X22 CONTROL = CAB + ECP2 - 1117
0 1 2 3 4 5 6 7 8 9

Terminal connectionlist

CABLE NAME

CABLE NAME
=CAB+ECP2-X24
TERMINAL STRIP X24 CONTROL PANEL JB2

CABLETYPE

CONNECTION

TERMINAL

CONNECTION

CABLETYPE
FUNCTION CODE EXTERN CODE INTERN PAGE / COLOMN

0VDC GROUD SEN-SORS AND MODULE =CAB+ECP2-X22 - 01 =CAB+ECP2-SKTC1 01 =CAB+ECP2/300.2

Manual Call Alarm =CAB+ECP2-X22 48 02 =CAB+ECP2-SKTC1 02 =CAB+ECP2/302.6

STOP PRESSURIZING =CAB+ECP2-304S2 21 03 =CAB+ECP2-SKTC1 03 =CAB+ECP2/304.2

LOSS OF PRESSURE =CAB+ECP2-304K8 A1 04 =CAB+ECP2-SKTC1 04 =CAB+ECP2/304.8

+12/24VDC SUPPLY OUTPUTS =CAB+ECP2-300F1 2 05 =CAB+ECP2-SKTC1 05 =CAB+ECP2/300.1

=CAB+ECP2-X24

0VDC GROUND ANALOGUE OUTPUTS =CAB+ECP2-SKTC2 A 06 =CAB+ECP2-SKTC1 06 =CAB+ECP2/300.4

= =CAB+ECP2-SKTC2 B 07 =CAB+ECP2-SKTC1 07 =CAB+ECP2/300.4

GAS SENSOR CABIN =CAB+ECP2-X22 45 08 =CAB+ECP2-SKTC1 08 =CAB+ECP2/301.1

GAS SENSOR SPARE 09 =CAB+ECP2-SKTC1 09 =CAB+ECP2/301.3

AIR FLOW 10 =CAB+ECP2-SKTC1 10 =CAB+ECP2/301.5

Spare 11 =CAB+ECP2-SKTC1 11 =CAB+ECP2/301.7

Interface Programming (RS232) =CAB+ECP2-X22 - 12 =CAB+ECP2-SKTC1 12 =CAB+ECP2/300.3

CANBUS TO POWERPACK 13 =CAB+ECP2-SKTC1 13 =CAB+ECP2/300.5

CANBUS TO DASHBOARD =CAB+ECP2-X22 41 14 =CAB+ECP2-SKTC1 14 =CAB+ECP2/300.7

=CAB+ECP2-X24

0VDC GROUD OUTPUTS =CAB+ECP2-X22 - 15 =CAB+ECP2-SKTC1 15 =CAB+ECP2/300.2

FIRE DAMPERS 16 =CAB+ECP2-SKTC1 16 =CAB+ECP2/305.7

SHUTDOWN ZONE 2 17 =CAB+ECP2-SKTC1 17 =CAB+ECP2/303.3

PURGE OVERRIDE =CAB+ECP2-303S7 14 18 =CAB+ECP2-SKTC1 18 =CAB+ECP2/303.7

VOLTAGE ERROR/OK =CAB+ECP2-F 6 19 =CAB+ECP2-SKTC1 19 =CAB+ECP2/303.5

PRESSURIZING FAN OVERHEATED =CAB+ECP2-F 1 20 =CAB+ECP2-SKTC1 20 =CAB+ECP2/302.5

Emergency Stop Cabin =CAB+ECP2-X22 37 21 =CAB+ECP2-SKTC1 21 =CAB+ECP2/302.7

VOLTAGE SEQUENCE ERROR =CAB+ECP2-X22 + 22 =CAB+ECP2-SKTC1 22 =CAB+ECP2/304.4

+12/24VDC SUPPLY SENSORS AND MODULE =CAB+ECP2-300F0 2 23 =CAB+ECP2-SKTC1 23 =CAB+ECP2/300.0

CANBUS TO POWERPACK =CAB+ECP2-300K4 11 24 =CAB+ECP2-SKTC1 24 =CAB+ECP2/300.5

CANBUS TO DASHBOARD =CAB+ECP2-X24 32 25 =CAB+ECP2-SKTC1 25 =CAB+ECP2/300.8

=CAB+ECP2-X22

CANBUS TO DASHBOARD =CAB+ECP2-X24 14 26 =CAB+ECP2-SKTC1 26 =CAB+ECP2/300.8

=CAB+ECP2-X22

GAS SENSOR AIR INLET =CAB+ECP2-X22 46 27 =CAB+ECP2-SKTC1 27 =CAB+ECP2/301.2

SMOKE SENSOR =CAB+ECP2-301U4 2 28 =CAB+ECP2-SKTC1 28 =CAB+ECP2/301.4

=CAB+ECP2-301R5

Spare 29 =CAB+ECP2-SKTC1 29 =CAB+ECP2/301.6

DOOR OPEN =CAB+ECP2-X22 47 30 =CAB+ECP2-SKTC1 30 =CAB+ECP2/301.8

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
1117 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 1119

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Terminalconnectionlist : =CAB+ECP2#-X24 TERMINAL STRIP X24 CONTROL = CAB + ECP2 - 1118
0 1 2 3 4 5 6 7 8 9

Terminal connectionlist

CABLE NAME

CABLE NAME
=CAB+ECP2-X24
TERMINAL STRIP X24 CONTROL PANEL JB2

CABLETYPE

CONNECTION

TERMINAL

CONNECTION

CABLETYPE
FUNCTION CODE EXTERN CODE INTERN PAGE / COLOMN

SMOKE ALARM =CAB+ECP2-305K3 A1 31 =CAB+ECP2-SKTC1 31 =CAB+ECP2/305.3

CANBUS TO DASHBOARD =CAB+ECP2-X22 42 32 =CAB+ECP2-SKTC1 32 =CAB+ECP2/300.7

=CAB+ECP2-X24

0VDC GROUND ANALOGUE OUTPUTS =CAB+ECP2-X22 - 33 =CAB+ECP2-SKTC1 33 =CAB+ECP2/300.3

+12/24VDC SUPPLY VIA RELAY =CAB+ECP2-X24 05 34 =CAB+ECP2-SKTC1 34 =CAB+ECP2/300.1

Spare 35 =CAB+ECP2-SKTC1 35 =CAB+ECP2/305.8

GENERAL FAULT =CAB+ECP2-303H1 X1 36 =CAB+ECP2-SKTC1 36 =CAB+ECP2/303.1

MAINTENANCE =CAB+ECP2-303S7 37 =CAB+ECP2-SKTC1 37 =CAB+ECP2/303.8

Override Zone 2 Shutdown 38 =CAB+ECP2-SKTC1 38 =CAB+ECP2/302.8

START PRESSURIZING =CAB+ECP2-304S1 13 39 =CAB+ECP2-SKTC1 39 =CAB+ECP2/304.1

RESET ALARM =CAB+ECP2-304S3 13 40 =CAB+ECP2-SKTC1 40 =CAB+ECP2/304.3

SPARE 41 =CAB+ECP2-SKTC1 41 =CAB+ECP2/304.5

= 42 =CAB+ECP2-SKTC1 42 =CAB+ECP2/304.6

= 43 =CAB+ECP2-SKTC1 43 =CAB+ECP2/304.7

LOW PRESSURE =CAB+ECP2-302U0 1 44 =CAB+ECP2-SKTC1 44 =CAB+ECP2/302.1

HIGH PRESSURE =CAB+ECP2-302U0 4 45 =CAB+ECP2-SKTC1 45 =CAB+ECP2/302.2

CIRCULATION FAN OVERHEATED =CAB+ECP2-X22 + 46 =CAB+ECP2-SKTC1 46 =CAB+ECP2/302.3

Spare 47 =CAB+ECP2-SKTC1 47 =CAB+ECP2/302.4

LOW GAS ALARM =CAB+ECP2-305K1 A1 48 =CAB+ECP2-SKTC1 48 =CAB+ECP2/305.1

HIGH GAS ALARM =CAB+ECP2-305K2 A1 49 =CAB+ECP2-SKTC1 49 =CAB+ECP2/305.2

OVER/ PRESSURE FAN =CAB+ECP2-SKTC1 50 50 =CAB+ECP2-F 7 =CAB+ECP2/305.4

FIRE & GAS ALARMS =CAB+ECP2-305U5 12 51 =CAB+ECP2-SKTC1 51 =CAB+ECP2/305.5

Spare 52 =CAB+ECP2-SKTC1 52 =CAB+ECP2/305.6

= 53 =CAB+ECP2-SKTC1 53 =CAB+ECP2/303.4

POWER ACTIVATED =CAB+ECP2-303H2 X1 54 =CAB+ECP2/303.2

NORMAL =CAB+ECP2-303S7 13 55 =CAB+ECP2-SKTC1 55 =CAB+ECP2/303.6

+12/24VDC SUPPLY VIA RELAY + =CAB+ECP2-300F2 2 =CAB+ECP2/300.1

= + =CAB+ECP2-300K4 14 =CAB+ECP2/300.2

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
1118 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 1120

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Terminalconnectionlist : =CAB+ECP2#-X24 TERMINAL STRIP X24 CONTROL = CAB + ECP2 - 1119
0 1 2 3 4 5 6 7 8 9

Terminal connectionlist

=CAB-W83

=CAB-W82

=CAB-W111

CABLE NAME

CABLE NAME
=CAB+ECP2-X26
TERMINAL STRIP X26 CONTROL PANEL JB2

CC600 3x2,5 mm²

CC600 3x2,5 mm²

RADOX 25x1,5 mm²

CABLETYPE

CONNECTION

TERMINAL

CONNECTION

CABLETYPE
FUNCTION CODE EXTERN CODE INTERN PAGE / COLOMN

5 =CAB+ECP4-X42 1 1 =CAB+ECP2-200F1.1 2 =CAB+ECP2/200.0

+ =CAB+ECP2-F 13 =CAB+ECP2/200.0

6 =CAB+ECP4-X42 2 2 =CAB+ECP2-X22 -:+ =CAB+ECP2/200.1

25 =CAB+ECP4-X42 PE PE =CAB+ECP2/200.1

=CAB+ECP2-303K3 83 + =CAB+ECP2/200.3

1 =CAB+CPRK-200U2 3 =CAB+ECP2-200F3 2 =CAB+ECP2/200.3

- =CAB+ECP2/200.3

2 =CAB+CPRK-200U2 4 =CAB+ECP2-X26 6 =CAB+ECP2/200.3

GN/YE =CAB+CPRK-200U2 PE =CAB+ECP2/200.3

1 =CAB+CPRK-200U4 5 =CAB+ECP2-200F4 2 =CAB+ECP2/200.4

2 =CAB+CPRK-200U4 6 =CAB+ECP2-X26 4 =CAB+ECP2/200.4

GN/YE =CAB+CPRK-200U4 PE =CAB+ECP2/200.5

+ =CAB+ECP2/200.0

+ =CAB+ECP2-200F1.1 1 =CAB+ECP2/200.0

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
1119 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 1121

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Terminalconnectionlist : =CAB+ECP2#-X26 TERMINAL STRIP X26 CONTROL = CAB + ECP2 - 1120
0 1 2 3 4 5 6 7 8 9

Terminal connectionlist

=CAB-W110

=CAB-W107

=CAB-W106

=CAB-W105

=CAB-W102

CABLE NAME

CABLE NAME
=CAB+ECP2-X28
TERMINAL STRIP X28 CONTROL PANEL JB2 (IS)

RADOX 3x1 mm²

RADOX 3x1 mm²

RADOX 3x1 mm²

RADOX 3x1 mm²

RADOX 3x1 mm²

CABLETYPE

CONNECTION

TERMINAL

CONNECTION

CABLETYPE
FUNCTION CODE EXTERN CODE INTERN PAGE / COLOMN

GAS SENSOR SPARE 1 =CAB+-301S4 L1in 1 =CAB+ECP2-301U4 10 =CAB+ECP2/301.4

SMOKE SENSOR 2 =CAB+-301S4 com 2 =CAB+ECP2-301U4 11 =CAB+ECP2/301.4

Low Pressure 1 =CAB+-302B0 c 3 =CAB+ECP2-302U0 10+ =CAB+ECP2/302.0

= 2 =CAB+-302B0 no 4 =CAB+ECP2/302.0

= 1 =CAB+-302B1 c 5 =CAB+ECP2/302.1

LOW PRESSURE 2 =CAB+-302B1 no 6 =CAB+ECP2-302U0 11- =CAB+ECP2/302.1

Air Flow 1 =CAB+-302B2 c 7 =CAB+ECP2-302U0 14+ =CAB+ECP2/302.2

HIGH PRESSURE 2 =CAB+-302B2 no 8 =CAB+ECP2-302U0 15- =CAB+ECP2/302.2

FIRE & GAS ALARMS 1 =CAB+-305Z5 x1 9 =CAB+ECP2-305U5 2 =CAB+ECP2/305.5

= 2 =CAB+-305Z5 x2 10 =CAB+ECP2-305U5 1 =CAB+ECP2/305.5

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
1120 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 1500

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Terminalconnectionlist : =CAB+ECP2#-X28 TERMINAL STRIP X28 CONTROL = CAB + ECP2 - 1121
0 1 2 3 4 5 6 7 8 9

Bill of materials
CODE Σ SPECIFICATIONS SUPPLIER PART NUMBER PAGE COLUMN

=CAB+ECP2-A 1 LINE BUSHING NOV ASEP Elmar 8501040891 =CAB+ECP2/40 0

=CAB+ECP2-B 1 LINE BUSHING NOV ASEP Elmar 8501040891 =CAB+ECP2/40 0

=CAB+ECP2-C 1 LINE BUSHING NOV ASEP Elmar 8501040891 =CAB+ECP2/40 0

=CAB+ECP2-D 1 LINE BUSHING NOV ASEP Elmar 8501040891 =CAB+ECP2/40 0

=CAB+ECP2-101D4 1 DIODE NOV ASEP Elmar A1066383 =CAB+ECP2/101 3

=CAB+ECP2-101D3 1 DIODE NOV ASEP Elmar A1066383 =CAB+ECP2/101 3

=CAB+ECP2-E 1 LINE BUSHING NOV ASEP Elmar 8501040890 =CAB+ECP2/40 0

=CAB+ECP2-F 1 LINE BUSHING NOV ASEP Elmar 8501036520 =CAB+ECP2/40 5

=CAB+ECP2-100F0 1 MCB NOV ASEP Elmar 8501040862 =CAB+ECP2/100 0

=CAB+ECP2-100F0 1 DOOR COUPL NOV ASEP Elmar 8501040839 =CAB+ECP2/100 0

=CAB+ECP2-101F2 1 MCB NOV ASEP Elmar 8501040866 =CAB+ECP2/101 2

=CAB+ECP2-100F8 1 MCB NOV ASEP Elmar 8501040868 =CAB+ECP2/100 8

=CAB+ECP2-100F7 1 MCB NOV ASEP Elmar 8501040868 =CAB+ECP2/100 7

=CAB+ECP2-100F0 1 TERMINAL COVER NOV ASEP Elmar 8501040869 =CAB+ECP2/100 0

=CAB+ECP2-100F1A 1 GLAS FUSE NOV ASEP Elmar A0000934 =CAB+ECP2/100 1

=CAB+ECP2-100F1B 1 GLAS FUSE NOV ASEP Elmar A0000934 =CAB+ECP2/100 1

=CAB+ECP2-100F1B 1 CLAMP NOV ASEP Elmar A0020441 =CAB+ECP2/100 1

=CAB+ECP2-100F1A 1 CLAMP NOV ASEP Elmar A0020441 =CAB+ECP2/100 1

=CAB+ECP2-100F1A 1 FUSE HOLDER NOV ASEP Elmar A0020442 =CAB+ECP2/100 1

=CAB+ECP2-100F1B 1 FUSE HOLDER NOV ASEP Elmar A0020442 =CAB+ECP2/100 1

=CAB+ECP2-300F0 1 FUSE HOLDER NOV ASEP Elmar A1079006 =CAB+ECP2/300 0

=CAB+ECP2-200F5 1 FUSE HOLDER NOV ASEP Elmar A1079006 =CAB+ECP2/200 5

=CAB+ECP2-300F1 1 FUSE HOLDER NOV ASEP Elmar A1079006 =CAB+ECP2/300 1

=CAB+ECP2-200F4 1 FUSE HOLDER NOV ASEP Elmar A1079006 =CAB+ECP2/200 4

=CAB+ECP2-300F2 1 FUSE HOLDER NOV ASEP Elmar A1079006 =CAB+ECP2/300 1

=CAB+ECP2-101F4 1 FUSE HOLDER NOV ASEP Elmar A1079006 =CAB+ECP2/101 4

=CAB+ECP2-101F5 1 FUSE HOLDER NOV ASEP Elmar A1079006 =CAB+ECP2/101 6

=CAB+ECP2-101F7 1 FUSE HOLDER NOV ASEP Elmar A1079006 =CAB+ECP2/101 7

=CAB+ECP2-101F8 1 FUSE HOLDER NOV ASEP Elmar A1079006 =CAB+ECP2/101 8

=CAB+ECP2-102F0.1 1 FUSE HOLDER NOV ASEP Elmar A1079006 =CAB+ECP2/102 0

=CAB+ECP2-102F5 1 FUSE HOLDER NOV ASEP Elmar A1079006 =CAB+ECP2/102 5

=CAB+ECP2-200F1.1 1 FUSE HOLDER NOV ASEP Elmar A1079006 =CAB+ECP2/200 0

=CAB+ECP2-200F3 1 FUSE HOLDER NOV ASEP Elmar A1079006 =CAB+ECP2/200 3

=CAB+ECP2-101F2.1 1 FUSE HOLDER NOV ASEP Elmar A1079006 =CAB+ECP2/101 2

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
1121 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 1501

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Bill of materials electric = CAB + ECP2 - 1500
0 1 2 3 4 5 6 7 8 9

Bill of materials
CODE Σ SPECIFICATIONS SUPPLIER PART NUMBER PAGE COLUMN

=CAB+ECP2-102F0.1 1 FUSE 2A NOV ASEP Elmar A1085707 =CAB+ECP2/102 0

=CAB+ECP2-101F8 1 FUSE 2A NOV ASEP Elmar A1085707 =CAB+ECP2/101 8

=CAB+ECP2-200F3 1 FUSE 4A NOV ASEP Elmar A1085712 =CAB+ECP2/200 3

=CAB+ECP2-300F0 1 FUSE 4A NOV ASEP Elmar A1085712 =CAB+ECP2/300 0

=CAB+ECP2-102F5 1 FUSE 4A NOV ASEP Elmar A1085712 =CAB+ECP2/102 5

=CAB+ECP2-200F5 1 FUSE 6A NOV ASEP Elmar A1085713 =CAB+ECP2/200 5

=CAB+ECP2-300F2 1 FUSE 10A NOV ASEP Elmar A1085714 =CAB+ECP2/300 1

=CAB+ECP2-300F1 1 FUSE 16A NOV ASEP Elmar A1085715 =CAB+ECP2/300 1

=CAB+ECP2-200F1.1 1 Fuse 8A NOV ASEP Elmar A1085716 =CAB+ECP2/200 0

=CAB+ECP2-200F4 1 Fuse 8A NOV ASEP Elmar A1085716 =CAB+ECP2/200 4

=CAB+ECP2-101F2.1 1 Fuse 20A NOV ASEP Elmar A1085718 =CAB+ECP2/101 2

=CAB+ECP2-101F5 1 Fuse 20A NOV ASEP Elmar A1085718 =CAB+ECP2/101 6

=CAB+ECP2-101F7 1 Fuse 20A NOV ASEP Elmar A1085718 =CAB+ECP2/101 7

=CAB+ECP2-101F4 1 FUSE 25A NOV ASEP Elmar A1085719 =CAB+ECP2/101 4

=CAB+ECP2-102F0 1 MCB-RCD NOV ASEP Elmar A1113057 =CAB+ECP2/102 0

=CAB+ECP2-200F0 1 MCB-RCD NOV ASEP Elmar A1113057 =CAB+ECP2/200 0

=CAB+ECP2-G 1 LINE BUSHING NOV ASEP Elmar 8501040889 =CAB+ECP2/40 5

=CAB+ECP2-200G0 1 POWER SUPPLY NOV ASEP Elmar A1069451 =CAB+ECP2/200 0

=CAB+ECP2-101G2 1 POWER SUPPLY 24VDC NOV ASEP Elmar A1108614 =CAB+ECP2/101 2

=CAB+ECP2-H 1 LINE BUSHING NOV ASEP Elmar 8501040888 =CAB+ECP2/40 5

=CAB+ECP2-303H2 1 LED MODULE GREEN NOV ASEP Elmar A1026947 =CAB+ECP2/303 2

=CAB+ECP2-101H5 1 LED MODULE GREEN NOV ASEP Elmar A1026947 =CAB+ECP2/101 4

=CAB+ECP2-100H3 1 LED MODULE RED NOV ASEP Elmar A1048931 =CAB+ECP2/100 3

=CAB+ECP2-303H1 1 LED MODULE RED NOV ASEP Elmar A1048931 =CAB+ECP2/303 1

=CAB+ECP2-I 1 LINE BUSHING NOV ASEP Elmar 8501040892 =CAB+ECP2/40 5

=CAB+ECP2-303K2 1 RELAIS NOV ASEP Elmar 8501040875 =CAB+ECP2/303 2

=CAB+ECP2-200K6 1 AUTOMOTIVE RELAY NOV ASEP Elmar A1026872 =CAB+ECP2/200 6

=CAB+ECP2-305K3 1 ELECTRONIC TERMINAL RELAY NOV ASEP Elmar A1029768 =CAB+ECP2/305 3

=CAB+ECP2-305K2 1 ELECTRONIC TERMINAL RELAY NOV ASEP Elmar A1029768 =CAB+ECP2/305 2

=CAB+ECP2-305K1 1 ELECTRONIC TERMINAL RELAY NOV ASEP Elmar A1029768 =CAB+ECP2/305 1

=CAB+ECP2-304K8 1 ELECTRONIC TERMINAL RELAY NOV ASEP Elmar A1029768 =CAB+ECP2/304 8

=CAB+ECP2-300K4 1 ELECTRONIC TERMINAL RELAY NOV ASEP Elmar A1029768 =CAB+ECP2/300 3

=CAB+ECP2-101K3 1 ELECTRONIC TERMINAL RELAY NOV ASEP Elmar A1029768 =CAB+ECP2/101 3

=CAB+ECP2-303K1 1 ELECTRONIC TERMINAL RELAY NOV ASEP Elmar A1029768 =CAB+ECP2/303 1

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
1500 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 1502

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Bill of materials electric = CAB + ECP2 - 1501
0 1 2 3 4 5 6 7 8 9

Bill of materials
CODE Σ SPECIFICATIONS SUPPLIER PART NUMBER PAGE COLUMN

=CAB+ECP2-305K4 1 RELAY NOV ASEP Elmar A1042092 =CAB+ECP2/305 4

=CAB+ECP2-303K3 1 RELAY NOV ASEP Elmar A1042598 =CAB+ECP2/303 3

=CAB+ECP2-100K4 1 RELAY NOV ASEP Elmar A1042598 =CAB+ECP2/100 4

=CAB+ECP2-100K4 1 RELAY NOV ASEP Elmar A1073948 =CAB+ECP2/100 4

=CAB+ECP2-303K3 1 RELAY NOV ASEP Elmar A1082318 =CAB+ECP2/303 3

=CAB+ECP2-100K2 1 DIGITAL MONITORING NOV ASEP Elmar A1112821 =CAB+ECP2/100 2

=CAB+ECP2-300P4 1 CANTRAK NOV ASEP Elmar A1066395 =CAB+ECP2/300 4

=CAB+ECP2-300P4 1 PLUG NOV ASEP Elmar A1061630 =CAB+ECP2/300 4

=CAB+ECP2-300P4 1 WEDGE NOV ASEP Elmar A1061631 =CAB+ECP2/300 4

=CAB+ECP2-101Q0 1 MOTOR SAFETY SWITCH NOV ASEP Elmar 8501040873 =CAB+ECP2/101 0

=CAB+ECP2-101Q0 1 Auxiliary contacts NOV ASEP Elmar A1085742 =CAB+ECP2/101 0

=CAB+ECP2-300R4 1 RESISTOR NOV ASEP Elmar A1065791 =CAB+ECP2/300 4

=CAB+ECP2-301R5 1 Resistor NOV ASEP Elmar A1080278 =CAB+ECP2/301 4

=CAB+ECP2-304S2 1 PUSH BUTTON NOV ASEP Elmar A0021202 =CAB+ECP2/304 2

=CAB+ECP2-304S1 1 PUSH BUTTON NOV ASEP Elmar A0021202 =CAB+ECP2/304 1

=CAB+ECP2-304S3 1 PUSH BUTTON NOV ASEP Elmar A0021202 =CAB+ECP2/304 3

=CAB+ECP2-102S8 1 SWITCH NOV ASEP Elmar A0021204 =CAB+ECP2/102 8

=CAB+ECP2-102S3 1 SWITCH NOV ASEP Elmar A0021204 =CAB+ECP2/102 3

=CAB+ECP2-102S5 1 SWITCH NOV ASEP Elmar A0021204 =CAB+ECP2/102 5

=CAB+ECP2-102S5 1 SWITCH NOV ASEP Elmar A1026946 =CAB+ECP2/102 5

=CAB+ECP2-102S8 1 SWITCH NOV ASEP Elmar A1026946 =CAB+ECP2/102 8

=CAB+ECP2-102S3 1 SWITCH NOV ASEP Elmar A1026946 =CAB+ECP2/102 3

=CAB+ECP2-304S1 1 SWITCH NOV ASEP Elmar A1059770 =CAB+ECP2/304 1

=CAB+ECP2-304S3 1 SWITCH NOV ASEP Elmar A1059770 =CAB+ECP2/304 3

=CAB+ECP2-304S2 1 SWITCH NOV ASEP Elmar A1059770 =CAB+ECP2/304 2

=CAB+ECP2-303S7 1 KEY SWITCH NOV ASEP Elmar A1101128 =CAB+ECP2/303 7

=CAB+ECP2-SKTC2 1 CAP SHELL SIZE 12 NOV ASEP Elmar A1043677 =CAB+ECP2/300 3

=CAB+ECP2-SKTC2 1 RECEPTACLE NOV ASEP Elmar A1083957 =CAB+ECP2/300 3

=CAB+ECP2-300U0 1 CONNECTOR FOR IFM NOV ASEP Elmar A1056781 =CAB+ECP2/300 0

=CAB+ECP2-301U4 1 ISOLATING REPEATER NOV ASEP Elmar A1059897 =CAB+ECP2/301 4

=CAB+ECP2-300U0 1 SAFETY CONTROLLER NOV ASEP Elmar A1066396 =CAB+ECP2/300 0

=CAB+ECP2-302U0 1 ISOLATOR 917 NOV ASEP Elmar A1080113 =CAB+ECP2/302 0

=CAB+ECP2-305U5 1 ISOLATOR NOV ASEP Elmar A1094323 =CAB+ECP2/305 5

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
1501 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2500

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Bill of materials electric = CAB + ECP2 - 1502
0 1 2 3 4 5 6 7 8 9

Hazardous area schedule


CODE SERIAL SPECIFICATIONS MANUFAC. / TYPE NUMBER PROT. TYPE / CERTIFICATE VOLTAGE / CURRENT POWER A. NUMBER

ASEP B.V. II3G EEx nA II T3


=CAB+ECP2-101D3 DIODE dubble 2x 28,4A 45V (Vf:0,52V) II3G EEx nA II T3 A1066383
[EX] STPS12045TV EPSILON 07ATEX 2238U A

ASEP B.V. II3G EEx nA II T3


=CAB+ECP2-101D4 DIODE dubble 2x 28,4A 45V (Vf:0,52V) II3G EEx nA II T3 A1066383
[EX] STPS12045TV EPSILON 07ATEX 2238U A

A.T.X. S.A. II 2G EEx de IIC T4 250 V


=CAB+ECP2-101F2.1 Fuse holder EEx de (Fuse Carrier) max 40A A1079006
909069 + 096299 LCIE 02 ATEX 0003 U 2A

A.T.X. S.A. II 2G EEx de IIC T4 250 V


=CAB+ECP2-101F4 Fuse holder EEx de (Fuse Carrier) max 40A A1079006
909069 + 096299 LCIE 02 ATEX 0003 U 2A

A.T.X. S.A. II 2G EEx de IIC T4 250 V


=CAB+ECP2-101F5 Fuse holder EEx de (Fuse Carrier) max 40A A1079006
909069 + 096299 LCIE 02 ATEX 0003 U 2A

A.T.X. S.A. II 2G EEx de IIC T4 250 V


=CAB+ECP2-101F7 Fuse holder EEx de (Fuse Carrier) max 40A A1079006
909069 + 096299 LCIE 02 ATEX 0003 U 2A

A.T.X. S.A. II 2G EEx de IIC T4 250 V


=CAB+ECP2-101F8 Fuse holder EEx de (Fuse Carrier) max 40A A1079006
909069 + 096299 LCIE 02 ATEX 0003 U 2A

Wago Ex II 3 GD EEx nA nC II T4 24 VDC


=CAB+ECP2-101K3 Electronic Terminal Relay 24VDC EEx nC A1029768
859-304 02 ATEX 132280 U 10m A 320mW

A.T.X. S.A. II 2G EEx de IIC T4 250 V


=CAB+ECP2-102F0.1 Fuse holder EEx de (Fuse Carrier) max 40A A1079006
909069 + 096299 LCIE 02 ATEX 0003 U 2A

A.T.X. S.A. II 2G EEx de IIC T4 250 V


=CAB+ECP2-102F5 Fuse holder EEx de (Fuse Carrier) max 40A A1079006
909069 + 096299 LCIE 02 ATEX 0003 U 2A

Bartec Nederland B.V. II 2 G EEx e II


=CAB+ECP2-102S3 Switch 2 position II 2GD EEx e II 90° front A0021204
05-0003-000900 PTB 00 ATEX 3114U A

Bartec Nederland B.V. II 2 G EEx de IIC


=CAB+ECP2-102S3 Switch 250V/10A 2xNO 2-pos Ex II 2G EEx de IIC (24VDC/6A) A1026946
07-3323-1200 PTB99ATEX1043U A

Bartec Nederland B.V. II 2 G EEx e II


=CAB+ECP2-102S5 Switch 2 position II 2GD EEx e II 90° front A0021204
05-0003-000900 PTB 00 ATEX 3114U A

Bartec Nederland B.V. II 2 G EEx de IIC


=CAB+ECP2-102S5 Switch 250V/10A 2xNO 2-pos Ex II 2G EEx de IIC (24VDC/6A) A1026946
07-3323-1200 PTB99ATEX1043U A

Bartec Nederland B.V. II 2 G EEx e II


=CAB+ECP2-102S8 Switch 2 position II 2GD EEx e II 90° front A0021204
05-0003-000900 PTB 00 ATEX 3114U A

Bartec Nederland B.V. II 2 G EEx de IIC


=CAB+ECP2-102S8 Switch 250V/10A 2xNO 2-pos Ex II 2G EEx de IIC (24VDC/6A) A1026946
07-3323-1200 PTB99ATEX1043U A

A.T.X. S.A. II 2G EEx de IIC T4 250 V


=CAB+ECP2-200F1.1 Fuse holder EEx de (Fuse Carrier) max 40A A1079006
909069 + 096299 LCIE 02 ATEX 0003 U 2A

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
1502 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2501

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Hazardous area schedule = CAB + ECP2 - 2500
0 1 2 3 4 5 6 7 8 9

Hazardous area schedule


CODE SERIAL SPECIFICATIONS MANUFAC. / TYPE NUMBER PROT. TYPE / CERTIFICATE VOLTAGE / CURRENT POWER A. NUMBER

A.T.X. S.A. II 2G EEx de IIC T4 250 V


=CAB+ECP2-200F3 Fuse holder EEx de (Fuse Carrier) max 40A A1079006
909069 + 096299 LCIE 02 ATEX 0003 U 2A

A.T.X. S.A. II 2G EEx de IIC T4 250 V


=CAB+ECP2-200F4 Fuse holder EEx de (Fuse Carrier) max 40A A1079006
909069 + 096299 LCIE 02 ATEX 0003 U 2A

A.T.X. S.A. II 2G EEx de IIC T4 250 V


=CAB+ECP2-200F5 Fuse holder EEx de (Fuse Carrier) max 40A A1079006
909069 + 096299 LCIE 02 ATEX 0003 U 2A

A.T.X. S.A. II 2G EEx de IIC T4 250 V


=CAB+ECP2-300F0 Fuse holder EEx de (Fuse Carrier) max 40A A1079006
909069 + 096299 LCIE 02 ATEX 0003 U 2A

A.T.X. S.A. II 2G EEx de IIC T4 250 V


=CAB+ECP2-300F1 Fuse holder EEx de (Fuse Carrier) max 40A A1079006
909069 + 096299 LCIE 02 ATEX 0003 U 2A

A.T.X. S.A. II 2G EEx de IIC T4 250 V


=CAB+ECP2-300F2 Fuse holder EEx de (Fuse Carrier) max 40A A1079006
909069 + 096299 LCIE 02 ATEX 0003 U 2A

Wago Ex II 3 GD EEx nA nC II T4 24 VDC


=CAB+ECP2-300K4 Electronic Terminal Relay 24VDC EEx nC A1029768
859-304 02 ATEX 132280 U 10m A 320mW

ASEP B.V. II 3 G Ex nA nL IIB T4


CANTRAK 2610 and Connector EX II 3 G n II T3 [EX] Epsilon
=CAB+ECP2-300P4 A1066395
Certified
[EX] CANtrak2610+Connector II3G n II T3 EPSILON 07 ATEX 2227X A

ASEP B.V. II 3 G ATEX EEx nA II T3 U


=CAB+ECP2-300R4 Resistor in clamp 120 Ohm Ex 3 G nA A1065791
[EX] MF25 120R-Multicomp CRT-D1167129 A

ASEP B.V. II 3 G Ex nA nC II T 3
[EX] Epsilon Certified Safety controller IFM and Connector EX II 3
=CAB+ECP2-300U0 A1066396
G n II T3
[EX] ECOMAT100 CR7020 EX II 3 G n II T3 EPSILON07ATEX2224X A

Stahl Ex II 3G EEx nA II T4
=CAB+ECP2-301U4 Isolating Repeater Loop powered 0/4-20mA EEx nAC II T4 A1059897
9167/11-11-00K 04 ATEX E 082 X A

Stahl II3G EEx nAC II T4


=CAB+ECP2-302U0 ISOLATOR 9170 Switching Repeater 1A, II3G EEx nAC IIT4 A1080113
9170/20-10-11K DMT 02 ATEX E 195 X A

Wago Ex II 3 GD EEx nA nC II T4 24 VDC


=CAB+ECP2-303K1 Electronic Terminal Relay 24VDC EEx nC A1029768
859-304 02 ATEX 132280 U 10m A 320mW

TP Kapfer Gmbh II 2 GD T80°C


=CAB+ECP2-303S7 Key Switch II 2GD EEx d IIC T6 A1101128
8923 PTB 02 ATEX 1152X A

Wago Ex II 3 GD EEx nA nC II T4 24 VDC


=CAB+ECP2-304K8 Electronic Terminal Relay 24VDC EEx nC A1029768
859-304 02 ATEX 132280 U 10m A 320mW

Bartec Nederland B.V. Ex II 2 G EEx de IIC I M 2 EEx de I


=CAB+ECP2-304S1 EX"d" Switch elm 1xNO & 1xNC A1059770
07-3323-1400 PTB 99 ATEX 1043 U A

Bartec Nederland B.V. II 2 G EEx e II -- --


=CAB+ECP2-304S1 EX Push button (red, green, yellow or white) A0021202
05-0003-000700 PTB 00 ATEX 3114 U -- A

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2500 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2502

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Hazardous area schedule = CAB + ECP2 - 2501
0 1 2 3 4 5 6 7 8 9

Hazardous area schedule


CODE SERIAL SPECIFICATIONS MANUFAC. / TYPE NUMBER PROT. TYPE / CERTIFICATE VOLTAGE / CURRENT POWER A. NUMBER

Bartec Nederland B.V. Ex II 2 G EEx de IIC I M 2 EEx de I


=CAB+ECP2-304S2 EX"d" Switch elm 1xNO & 1xNC A1059770
07-3323-1400 PTB 99 ATEX 1043 U A

Bartec Nederland B.V. II 2 G EEx e II -- --


=CAB+ECP2-304S2 EX Push button (red, green, yellow or white) A0021202
05-0003-000700 PTB 00 ATEX 3114 U -- A

Bartec Nederland B.V. Ex II 2 G EEx de IIC I M 2 EEx de I


=CAB+ECP2-304S3 EX"d" Switch elm 1xNO & 1xNC A1059770
07-3323-1400 PTB 99 ATEX 1043 U A

Bartec Nederland B.V. II 2 G EEx e II -- --


=CAB+ECP2-304S3 EX Push button (red, green, yellow or white) A0021202
05-0003-000700 PTB 00 ATEX 3114 U -- A

Wago Ex II 3 GD EEx nA nC II T4 24 VDC


=CAB+ECP2-305K1 Electronic Terminal Relay 24VDC EEx nC A1029768
859-304 02 ATEX 132280 U 10m A 320mW

Wago Ex II 3 GD EEx nA nC II T4 24 VDC


=CAB+ECP2-305K2 Electronic Terminal Relay 24VDC EEx nC A1029768
859-304 02 ATEX 132280 U 10m A 320mW

Wago Ex II 3 GD EEx nA nC II T4 24 VDC


=CAB+ECP2-305K3 Electronic Terminal Relay 24VDC EEx nC A1029768
859-304 02 ATEX 132280 U 10m A 320mW

MTL instruments Ex nA IIC T4


=CAB+ECP2-305U5 Isolator 5525 A1094323
MTL 5525 MTL08ATEX5521X A

Bartec Nederland B.V. II 2 G EEx d II


=CAB+ECP2-A LINE BUSHING M42 2x35MM² 690V ATX 8501040891
07-9101-Q026 (537) PTB97ATEX1047U A

Bartec Nederland B.V. II 2 G EEx d II


=CAB+ECP2-B LINE BUSHING M42 2x35MM² 690V ATX 8501040891
07-9101-Q026 (537) PTB97ATEX1047U A

Bartec Nederland B.V. II 2 G EEx d II


=CAB+ECP2-C LINE BUSHING M42 2x35MM² 690V ATX 8501040891
07-9101-Q026 (537) PTB97ATEX1047U A

Bartec Nederland B.V. II 2 G EEx d II


=CAB+ECP2-D LINE BUSHING M42 2x35MM² 690V ATX 8501040891
07-9101-Q026 (537) PTB97ATEX1047U A

Bartec Nederland B.V. II 2 G EEx d II


=CAB+ECP2-E LINE BUSHING M24 1x35MM² 690V ATX 8501040890
07-9101-Q012 (538) PTB97ATEX1047U A

Bartec Nederland B.V. II 2 G EEx d II


=CAB+ECP2-F LINE BUSHING M42 32x1,5mm² 250V ATX> 8501036520
07-9102-H326/G (320) PTB97ATEX1047U A

Bartec Nederland B.V. II 2 G EEx d II


=CAB+ECP2-G LINE BUSHING M36 7x4MM² 690V ATX 8501040889
07-9101-K074/G (485) PTB97ATEX1047U A

Bartec Nederland B.V. II 2 G EEx d II


=CAB+ECP2-H LINE BUSHING M33 6+PE x2,5MM² 690V ATX 8501040888
07-9101-J073/G (370) PTB97ATEX1047U A

Bartec Nederland B.V. II 2 G EEx d II


=CAB+ECP2-I LINE BUSHING M24 GREEN MOLDED 8501040892
07-9100-0002/GXXX PTB97ATEX1047U A

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2501 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2503

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Hazardous area schedule = CAB + ECP2 - 2502
0 1 2 3 4 5 6 7 8 9

Hazardous area schedule


CODE SERIAL SPECIFICATIONS MANUFAC. / TYPE NUMBER PROT. TYPE / CERTIFICATE VOLTAGE / CURRENT POWER A. NUMBER

ASEP B.V. II 3G Ex nA II T3
=CAB+ECP2-SKTC2 Mil Receptacle 10P Shell size 12 EEx nA (II 3G Ex nA II T3) A1083957
[EX] 62LC-12E12-10SN(771)-Amphenol EPSILON07ATEX2240X A

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2502 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE +ECP4/1

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Hazardous area schedule = CAB + ECP2 - 2503
0 1 2 3 4 5 6 7 8 9

National Oilwell Varco Corporate Headquarters 7909 Parkwood Circle Dr. Houston, TX 77036 Phone: 1 888 262 8645 www.NOV.com/ASEPElmar

Cabin

ECP4 = CAB 24V IFM DSHB ATX


8501036015/3

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
+ECP2/2503 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 30

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 11.Aug.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Frontpage = CAB + ECP4 - 1
0 1 2 3 4 5 6 7 8 9

TERMINAL STRIP NUMBERING CONNECTORS

=CAB+ECP4-X42 = TERMINAL STRIP X42 JUNCTION BOX ECP4 =CAB+ECP4#-SKTC2 = SKTC2 Interface Programming (RS232)
=CAB+ECP4-X44 = TERMINAL STRIP X44 JUNCTION BOX ECP4
=CAB+ECP4-X46 = TERMINAL STRIP X46 JUNCTION BOX ECP4

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
1 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 200

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 24.Aug.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Terminal Strips & Connectors = CAB + ECP4 - 30
0 1 2 3 4 5 6 7 8 9

+-ECP4
8501036015-3

0VDC-E 0VDC-E

-200K3 A2 -200K4 A2
24VDC 24VDC
EEx nC EEx nC
A1029768 A1 A1029768 A1

12 14

11

/302.8
12VDC-E 24VDC-E 24VDC-E
24VDC-E
0VDC-E

0VDC-E
-200F0 -200F2 PE
-200F3
Operator Smart Power
Panel Monitor 24Vdc
4A 4A 2A 11
A1085712 A1085712 EEx de
A1079006 A1079006 A1085707
-200K4
A1079006 /200.4 12 14
PE PE 0VDC-E

X42 1 2 3 4 5 6 X42 7 SP 8 9 10 11 X42 12 13 14 15 SP SP SP SP SP


EEx e EEx e

W36 BK GY
+/20.13

-B-EARTH -OP-12VDC -BP-12VDC -BP-EARTH -JB4-SP

+DSHB
+ECP2/200.1 +DSHB/210.0 +DSHB/210.8 +DSHB/210.8 +ECP2/200.2
-200S8
WIPER BK
-12VDC -0VDC(12V) -OP-0VDC -BP-0VDC -SWCHD-24V -0VDC OFF/ON

+ECP2/200.8 / -GRNL-P

+ECP2/200.6 / -Wwstch2
+ECP2/200.0 +ECP2/200.1 +DSHB/210.0 +DSHB/210.8 +ECP2/200.1 +ECP2/200.2 A1030262
GY
A1016540
+/20.14

+ECP2/200.6 / -Wwstch1
12V Supply Winch Green Green
Supply Operator Shutdown Light Light
Panel By OP By
....
THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
30 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 300

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 30.Aug.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Junctionbox HES Supply = CAB + ECP4 - 200
0 1 2 3 4 5 6 7 8 9

300U0 = PLug on IFM


SKTC1 = Connector IFM

-300U0
EX IFM CR7020
A1066396
A1056781
/300.0 CAN 1 CAN 1 CAN 2 CAN 2
/301.0 VBB s VBB o VBB r GND s GND o GND a GND RxD TxD ERROR TEST
/302.0
/303.0
H L H L
/304.0
/305.0

VBB s VBB o VBB r GND s GND o GND a GND RxD TxD ERROR TEST CAN 1 H CAN 1 L CAN 2 H CAN 2 L

SKTC1 23 05 34 01 15 12 33 06 07 13 24 14 32 26 25
/300.0
X44 23 05 34 01 15 12 33 06 07 13 24 14 32 26 25
11

-300K4
/300.3 12 14
24V / 300.4
+24Vdc-IFM TEST INPUT :
- NORMAL TO GROUND
- FOR SOFTWARE TO +12/24VDC
-300F0 -300F1 -300F2
IFM IFM IFM
VBB s VBB o CIRCUIT
2A 16A 10A
EEx de EEx de EEx de 300.0 / 24V
A1085712 A1085715 A1085714
A1079006 A1079006 A1079006 X42 18 19

W84 WH BN
+/20.13
24VDC-E

+DSHB
PLGA 1 2 4 4 5 6
0VDC-E

-300P4 A
EEx nAnL
A1066395 1 2 3 4 5 6
A1061630
A1061631

7 8 9 10 11 12
A 12 14
/300.5
-301K1
PLGA 7 8
A1 -300K4 /301.1
11
24VDC
EEx nC -300R9
0VDC-E A2 A1029768 W84 GN YE
120 Ohm
+/20.13
14 11 /300.5 EEx nA
12 A1065791

PE

/30.6
A1043677
A1083957 X42 16 17
SKTC2 A B C D E

Ex e Ex e
+ECP2/101.6 / +24VDC-ECP2/ECP4

+ECP2/101.6 / 0VDC-ECP2/ECP4

+ECP2/101.6 / PE-ECP2/ECP4

=DSHB-CANH
+ECP2/300.6

=DSHB-CANL
+ECP2/300.6

Interface
Programming
(RS232)

Supply
ECP4
THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
200 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 301

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 24.Aug.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Safety controller EX = CAB + ECP4 - 300
0 1 2 3 4 5 6 7 8 9

-300U0 INPUT INPUT INPUT INPUT INPUT INPUT INPUT INPUT


/300.0

Winch Line Winch Winch Winch


Spare Spare Spare
Connected Tension Speed In Hole Out Hole

IX0.00 IW03 DI / AI IX0.01 IW04 DI / AI IX0.02 IW05 DI / AI IX0.03 IW06 DI / AI IX0.04 IW07 DI / AI IX0.05 IW08 DI / AI IX0.06 IW09 DI / AI IX0.07 IW10 DI / AI

SKTC1 08 27 09 28 10 29 11 30
/300.0
X44 08 27 09 28 10 29 11 30

A1
14 11 /300.9
-301K1
12
24VDC A2
EEx nC
A1029768

0VDC-E

24VDC-IFM 24VDC-IFM

0VDC-E 0VDC-E
X42 20

Ex e Ex e

W85 1 2 3 W86 1 2 3 4 5
+/20.14 +/20.14

+DSHB
VS GND SIGN VS GND SIGN
A B
Wnch-ctd
+ECP2/200.9

-301R5 -301J6
EEx nA EEx nA
A1065966 A1065967
+/20.14 +/20.14

Winch Spare Spare Spare Line Winch Winch Winch


Connected Tension Speed In Hole Out Hole

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
300 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 302

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 11.Aug.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Safety controller Dashboard = CAB + ECP4 - 301
0 1 2 3 4 5 6 7 8 9

-300U0 INPUT INPUT INPUT INPUT INPUT INPUT INPUT INPUT


/300.0

Spooling Emergency
Autospooling Wirespray Start Stop Winch
Horn or Stop
Off / On Off / On Engine Engine Stop
Slewing Dashboard
IX0.11 DI

QX0.00 DO/AO QX0.01 DO/AO QX0.02 DO/AO QX0.03 DO/AO IX0.12 DI IX0.13 DI IX0.14 DI IX0.15 DI

SKTC1 44 45 46 47 20 02 21 38
/300.0
X44 44 45 46 47 20 02 21 38

12 14
-200K3
/200.3
11

+24VDC-IFM +24VDC-IFM +24VDC-IFM +24VDC-IFM +24VDC-IFM +24VDC-IFM

SP SP SP SP SP SP SP SP SP SP SP SP
Ex e Ex e

W87 BK GY BU BN W88 BK GY BU BN W89 BK GY BU BN W90 BN BU BK GY W91 BN BU BK GY W92 BN BU BK GY


+/20.15 +/20.15 +/20.16 +/20.16 +/20.17 +/20.17

+DSHB BN

BU

-302S1 -302S2 -302S3 -302S6 -302S7 -302S8


Autospooling Wirespray Horn Stop Emergency Winch
Off / On Off / On A1030262 Engine Stop Stop
A1030262 A1030262 A0021202 A1030262 Dashboard A1030262
A1016540 A1016540 +/20.16 A0021202 A1030262 A1064561
+/20.15 +/20.15 +/20.16 A0021203 +/20.17
+/20.17

Autospooling Wirespray Horn Spooling Start Stop Emergency Winch


Off / On Off / On or Engine Engine Stop Stop
Slewing Dashboard

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
301 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 303

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 30.Aug.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Safety controller Dashboard = CAB + ECP4 - 302
0 1 2 3 4 5 6 7 8 9

INPUT / OUTPUT -300U0 OUTPUT OUTPUT OUTPUT OUTPUT INPUT INPUT INPUT INPUT
/300.0

Start Stop Low High


Spare Spare Spare Spare
Generator Generator Speed Speed

QX0.04 DO/AO QX0.05 DO/AO QX0.06 DO/AO QX0.07 DO/AO IX1.04 DI IX1.05 DI IX1.06 DI IX1.07 DI

SKTC1 36 54 17 53 19 55 18 37
/300.0
X44 36 54 17 53 19 55 18 37

+24VDC-IFM +24VDC-IFM +24VDC-IFM

Ex e Ex e

W93 BK GY W93 BN BU W94 BK BN GY W94 BU


+/20.18 +/20.18 +/20.18 +/20.18

+DSHB

BK BU

GY BN

-303S4 -303S7
Start/Stop SPEED
Generator Low / Medium / High
A1030262 A0021395
A1040349 A0021205
+/20.17 +/20.18

Spare Spare Spare Spare Start Stop Low High


Generator Generator Speed Speed

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
302 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 304

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 15.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Safety controller Dashboard = CAB + ECP4 - 303
0 1 2 3 4 5 6 7 8 9

INPUT / OUTPUT -300U0 INPUT INPUT INPUT INPUT INPUT INPUT INPUT INPUT
/300.0

Brake Drum Throttle Throttle Levelwind Levelwind Measurehead Measurehead


Control Selection Up Down Up Down Left Down

IX1.08 DI IX1.09 DI IX1.10 DI IX1.11 DI IX1.12 DI IX1.13 DI IX1.14 DI IX1.15 DI

SKTC1 39 03 40 22 41 42 43 04
/300.0
X44 39 03 40 22 41 42 43 04

+24VDC-IFM +24VDC-IFM +24VDC-IFM +24VDC-IFM +24VDC-IFM


0VDC-E X42 SP SP SP 0VDC-E X42 SP SP SP
SP SP
Ex e Ex e

W95 BK GY BU BN W96 BK GY W96 BN BU W97 1 2 4 3 6 7 5 W98 1 2 4 3 6 7 5


+/20.19 +/20.19 +/20.19 +/20.19 +/20.20

+DSHB 13 BK GY BU BN VS VS GND A B VS VS GND A B


A B A B
14 UP DOWN LEFT RIGHT
-304S1 VS VS VS VS
Brake -304S2
Control Throttle
A1030262 Up / Down -304J5
A1016540 A1036467 Joystick
+/20.19
A1040349 EEx nA
A1054749 A1065965
+/20.19 +/20.19

Brake Drum Throttle Throttle Levelwind Levelwind Measurehead Measurehead


Control Selection Up Down Up Down Left Down

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
303 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 305

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 15.Aug.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Safety controller Dashboard = CAB + ECP4 - 304
0 1 2 3 4 5 6 7 8 9

-300U0 OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT


/300.0

Horn Spare Spare Spare Spare Spare Spare Spare

QX1.00 DO/AO QX1.01 DO QX1.02 DO QX1.03 DO/AO QX1.04 DO/AO QX1.05 DO QX1.06 DO QX1.07 DO/AO

SKTC1 48 49 31 50 51 52 16 35
/300.0
X44 48 49 31 50 51 52 16 35

+24VDC-IFM +24VDC-IFM

-305K0 A1 12 14
24VDC
-305K0
EEx nC /305.0
A1029768 A2 11

14 11 /305.1
12
-305D1 1 3
2x 60A 45V
EEx nA
A1066383 2 4

0VDC-E

0VDC-E
X42 21 22 X42 23

Ex e Ex e

W99 1 2
+/20.20

x1

x2

-305Z1
EEx nR
24Vdc 0,3A
A1104537
+/20.20

Signal from Horn


Perforation monitor

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
304 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 1100

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 11.Feb.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Safety controller Dashboard = CAB + ECP4 - 305
0 1 2 3 4 5 6 7 8 9

Terminal connectionlist

=CAB-W232

=CAB-W120

=CAB-W111

CABLE NAME

CABLE NAME
=CAB+ECP4-X42
TERMINAL STRIP X42 JUNCTION BOX ECP4

Molded-a3 3x1,5 mm²

RADOX 2x1,5 mm²

RADOX 25x1,5 mm²

CABLETYPE

CONNECTION

TERMINAL

CONNECTION

CABLETYPE
FUNCTION CODE EXTERN CODE INTERN PAGE / COLOMN

5 =CAB+ECP2-X26 1 1 =CAB+ECP4-200F0 =CAB+ECP4/200.0

- =CAB+ECP4/200.0

- =CAB+ECP4/200.0

- =CAB+ECP4-X42 2 =CAB+ECP4/200.1

6 =CAB+ECP2-X26 2 2 =CAB+ECP4-X42 -:+ =CAB+ECP4/200.1

- =CAB+ECP4/200.1

- =CAB+ECP4-X42 4 =CAB+ECP4/200.1

- =CAB+ECP4/200.1

- =CAB+ECP4/200.1

25 =CAB+ECP2-X26 PE PE =CAB+ECP4/200.1

- =CAB+ECP4/200.1

- =CAB+ECP4/200.1

1 =CAB+DSHB-J1 1 3 =CAB+ECP4-X46 +:+ =CAB+ECP4/200.1

2 =CAB+DSHB-J1 2 4 =CAB+ECP4-X42 -:+ =CAB+ECP4/200.1

BN =CAB+DSHB-210U8 5 =CAB+ECP4-X42 3 =CAB+ECP4/200.1

BU =CAB+DSHB-210U8 6 =CAB+ECP4-X42 4 =CAB+ECP4/200.2

GN/YE =CAB+DSHB-210U8 PE =CAB+ECP4/200.2

=CAB+ECP4-200F2 + =CAB+ECP4/200.2

- =CAB+ECP4/200.3

+ =CAB+ECP4/200.3

+ =CAB+ECP4/200.3

=CAB+ECP4-200K3 A2 - =CAB+ECP4/200.3

+ =CAB+ECP4-X42 8 =CAB+ECP4/200.3

+ =CAB+ECP4/200.3

+ =CAB+ECP4-200F3 =CAB+ECP4/200.4

8 =CAB+ECP2-X22 13 7 =CAB+ECP4-200F3 =CAB+ECP4/200.4

+ =CAB+ECP4/200.4

+ =CAB+ECP4/200.4

+ =CAB+ECP4/200.4

9 =CAB+ECP2-X22 SP SP =CAB+ECP4/200.4

10 =CAB+ECP2-X22 - - =CAB+ECP4/200.4

=CAB+ECP4-200K4 A2 - =CAB+ECP4/200.4

8 =CAB+ECP4-X42 + =CAB+ECP4/200.5

9 =CAB+ECP4-200K3 A1 =CAB+ECP4/200.5

10 =CAB+ECP4-X42 8 =CAB+ECP4/200.5

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
305 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 1101

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Terminalconnectionlist : =CAB+ECP4#-X42 TERMINAL STRIP X42 JUNCTION BOX = CAB + ECP4 - 1100
0 1 2 3 4 5 6 7 8 9

Terminal connectionlist

=CAB-W90

=CAB-W89

=CAB-W88

=CAB-W87

=CAB-W86

=CAB-W85

=CAB-W84

=CAB-W111

CABLE NAME

CABLE NAME

=CAB-W36

=CAB-W84
=CAB+ECP4-X42
TERMINAL STRIP X42 JUNCTION BOX ECP4

Molded-b4 4x1,5 mm²

Molded-b4 4x1,5 mm²

Molded-b4 4x1,5 mm²

Molded-b4 4x1,5 mm²

RADOX 7x1 mm²

RADOX 3x1 mm²

SCB628 2x2x0,25 mm²

RADOX 25x1,5 mm²

CABLETYPE

CONNECTION

TERMINAL

CONNECTION

CABLETYPE

Molded-b4 4x1,5 mm²

SCB628 2x2x0,25 mm²


FUNCTION CODE EXTERN CODE INTERN PAGE / COLOMN

11 =CAB+ECP4-200K4 A1 =CAB+ECP4/200.6

=CAB+ECP4-200K4 11 + =CAB+ECP4/200.6

12 =CAB+ECP4-200K4 12 =CAB+ECP4/200.6

13 =CAB+ECP2-X22 19 13 =CAB+ECP4-200K4 14 =CAB+ECP4/200.6

11 =CAB+ECP2-X22 14 14 =CAB+DSHB-200S8 BK BK =CAB+ECP4/200.6

12 =CAB+ECP2-X22 15 15 =CAB+DSHB-200S8 GY GY =CAB+ECP4/200.7

SP =CAB+ECP4/200.8

SP =CAB+ECP4/200.8

SP =CAB+ECP4/200.9

SP =CAB+ECP4/200.9

Green Light SP =CAB+ECP4/200.9

0VDC GROUND ANALOGUE OUTPUTS 15 =CAB+ECP2-X22 41 16 =CAB+DSHB-PLGA 7 GN =CAB+ECP4/300.5

= 16 =CAB+ECP2-X22 42 17 =CAB+DSHB-PLGA 8 YE =CAB+ECP4/300.5

Winch Connected - =CAB+ECP4-301K1 A2 =CAB+ECP4/301.1

0VDC GROUND ANALOGUE OUTPUTS WH =CAB+DSHB-PLGA 1 18 =CAB+ECP4-X42 - =CAB+ECP4/300.5

= BN =CAB+DSHB-PLGA 2 19 =CAB+ECP4-300F0 =CAB+ECP4/300.5

Winch Connected 14 =CAB+ECP2-X22 20 20 =CAB+ECP4-X44 08 =CAB+ECP4/301.1

Line Tension 1 =CAB+DSHB-301R5 VS + =CAB+ECP4/301.5

= - =CAB+ECP4/301.5

Winch Speed 1 =CAB+DSHB-301J6 VS + =CAB+ECP4/301.6

= - =CAB+ECP4/301.6

Autospooling Off / On BK =CAB+DSHB-302S1 + =CAB+ECP4/302.1

= BU =CAB+DSHB-302S1 SP =CAB+ECP4/302.1

= BN =CAB+DSHB-302S1 SP =CAB+ECP4/302.1

Wirespray Off / On BK =CAB+DSHB-302S2 + =CAB+ECP4/302.2

= BU =CAB+DSHB-302S2 SP =CAB+ECP4/302.2

= BN =CAB+DSHB-302S2 SP =CAB+ECP4/302.2

Horn BK =CAB+DSHB-302S3 + =CAB+ECP4/302.3

= BU =CAB+DSHB-302S3 SP =CAB+ECP4/302.3

= BN =CAB+DSHB-302S3 SP =CAB+ECP4/302.3

Stop Engine BN =CAB+DSHB-302S6 BN + =CAB+ECP4/302.6

= BK =CAB+DSHB-302S6 SP =CAB+ECP4/302.6

= GY =CAB+DSHB-302S6 SP =CAB+ECP4/302.6

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
1100 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 1102

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Terminalconnectionlist : =CAB+ECP4#-X42 TERMINAL STRIP X42 JUNCTION BOX = CAB + ECP4 - 1101
0 1 2 3 4 5 6 7 8 9

Terminal connectionlist

=CAB-W99

=CAB-W97

=CAB-W96

=CAB-W95

=CAB-W94

=CAB-W93

=CAB-W92

=CAB-W91

CABLE NAME

CABLE NAME
=CAB+ECP4-X42
TERMINAL STRIP X42 JUNCTION BOX ECP4

RADOX 3x1 mm²

RADOX 7x1 mm²

Molded-b4 4x1,5 mm²

Molded-b4 4x1,5 mm²

Molded-b4 4x1,5 mm²

Molded-b4 4x1,5 mm²

Molded-b4 4x1,5 mm²

Molded-b4 4x1,5 mm²

CABLETYPE

CONNECTION

TERMINAL

CONNECTION

CABLETYPE
FUNCTION CODE EXTERN CODE INTERN PAGE / COLOMN

Emergency Stop Dashboard BN =CAB+DSHB-302S7 + =CAB+ECP4/302.7

= BK =CAB+DSHB-302S7 SP =CAB+ECP4/302.7

= GY =CAB+DSHB-302S7 SP =CAB+ECP4/302.7

Winch Stop BN =CAB+DSHB-302S8 + =CAB+ECP4/302.8

= BK =CAB+DSHB-302S8 SP =CAB+ECP4/302.8

= GY =CAB+DSHB-302S8 SP =CAB+ECP4/302.9

Start Generator BK =CAB+DSHB-303S4 BK + =CAB+ECP4/303.5

Stop Generator BN =CAB+DSHB-303S4 BU + =CAB+ECP4/303.6

= BK =CAB+DSHB-303S7 + =CAB+ECP4/303.7

BN =CAB+DSHB-303S7

Brake Control BK =CAB+DSHB-304S1 13 + =CAB+ECP4/304.1

= BU =CAB+DSHB-304S1 SP =CAB+ECP4/304.1

= BN =CAB+DSHB-304S1 SP =CAB+ECP4/304.1

Throttle Up BK =CAB+DSHB-304S2 BK + =CAB+ECP4/304.3

Throttle Down BN =CAB+DSHB-304S2 BU + =CAB+ECP4/304.4

Levelwind 1 =CAB+DSHB-304J5 VS + =CAB+ECP4/304.5

= - =CAB+ECP4/304.5

Signal from Perforation monitor 21 =CAB+ECP4-305K0 A2 =CAB+ECP4/305.0

= - =CAB+ECP4/305.0

= 22 =CAB+ECP4/305.0

= 1 =CAB+-305Z1 x2 - =CAB+ECP4/305.1

Horn 2 =CAB+-305Z1 x1 23 =CAB+ECP4-305D1 2 =CAB+ECP4/305.1

= =CAB+ECP4-305K0 14 + =CAB+ECP4/305.1

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
1101 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 1103

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Terminalconnectionlist : =CAB+ECP4#-X42 TERMINAL STRIP X42 JUNCTION BOX = CAB + ECP4 - 1102
0 1 2 3 4 5 6 7 8 9

Terminal connectionlist

=CAB-W98

=CAB-W97

=CAB-W111

CABLE NAME

CABLE NAME
=CAB+ECP4-X42
TERMINAL STRIP X42 JUNCTION BOX ECP4

RADOX 7x1 mm²

RADOX 7x1 mm²

RADOX 25x1,5 mm²

CABLETYPE

CONNECTION

TERMINAL

CONNECTION

CABLETYPE
FUNCTION CODE EXTERN CODE INTERN PAGE / COLOMN

1 =CAB+ECP2-X22 5 + =CAB+ECP4/300.0

2 =CAB+ECP2-X22

+12/24VDC SUPPLY SENSORS AND MODULE + =CAB+ECP4-300F0 =CAB+ECP4/300.0

Supply ECP4 3 =CAB+ECP2-X22 6 - =CAB+ECP4/300.0

4 =CAB+ECP2-X22

+12/24VDC SUPPLY VIA RELAY - =CAB+ECP4/300.2

0VDC GROUD SEN-SORS AND MODULE - =CAB+ECP4-X44 01 =CAB+ECP4/300.2

= - =CAB+ECP4/300.2

= - =CAB+ECP4-X44 15 =CAB+ECP4/300.2

= - =CAB+ECP4/300.2

= - =CAB+ECP4-X44 12 =CAB+ECP4/300.2

= - =CAB+ECP4/300.2

= - =CAB+ECP4-X44 33 =CAB+ECP4/300.2

= - =CAB+ECP4/300.2

= - =CAB+ECP4-300K4 12 =CAB+ECP4/300.2

= - =CAB+ECP4/300.2

0VDC GROUD OUTPUTS - =CAB+ECP4-X42 18 =CAB+ECP4/300.2

= - =CAB+ECP4/300.2

= - =CAB+ECP4-300K4 A1 =CAB+ECP4/300.2

= - =CAB+ECP4/300.2

= - =CAB+ECP4-SKTC2 C =CAB+ECP4/300.2

Levelwind Up 3 =CAB+DSHB-304J5 SP =CAB+ECP4/304.5

= 6 =CAB+DSHB-304J5 SP =CAB+ECP4/304.6

= 7 =CAB+DSHB-304J5 SP =CAB+ECP4/304.6

Levelwind Down 1 =CAB+DSHB-304J5 VS + =CAB+ECP4/304.7

= - =CAB+ECP4/304.7

Measurehead Left 3 =CAB+DSHB-304J5 SP =CAB+ECP4/304.7

= 6 =CAB+DSHB-304J5 SP =CAB+ECP4/304.8

= 7 =CAB+DSHB-304J5 SP =CAB+ECP4/304.8

Signal from Perforation monitor =CAB+ECP4-305K0 A1 + =CAB+ECP4/305.0

=CAB+ECP4/200.4

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
1102 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 1104

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Terminalconnectionlist : =CAB+ECP4#-X42 TERMINAL STRIP X42 JUNCTION BOX = CAB + ECP4 - 1103
0 1 2 3 4 5 6 7 8 9

Terminal connectionlist

=CAB-W96

=CAB-W91

=CAB-W93

=CAB-W94

=CAB-W86

=CAB-W85

=CAB-W98

=CAB-W90

CABLE NAME

CABLE NAME
=CAB+ECP4-X44
TERMINAL STRIP X44 JUNCTION BOX ECP4

Molded-b4 4x1,5 mm²

Molded-b4 4x1,5 mm²

Molded-b4 4x1,5 mm²

Molded-b4 4x1,5 mm²

RADOX 7x1 mm²

RADOX 3x1 mm²

RADOX 7x1 mm²

Molded-b4 4x1,5 mm²

CABLETYPE

CONNECTION

TERMINAL

CONNECTION

CABLETYPE
FUNCTION CODE EXTERN CODE INTERN PAGE / COLOMN

0VDC GROUD SEN-SORS AND MODULE =CAB+ECP4-X42 - 01 =CAB+ECP4-SKTC1 01 =CAB+ECP4/300.2

Stop Engine BU =CAB+DSHB-302S6 BU 02 =CAB+ECP4-SKTC1 02 =CAB+ECP4/302.6

Drum Selection 03 =CAB+ECP4-SKTC1 03 =CAB+ECP4/304.2

Measurehead Down 5 =CAB+DSHB-304J5 B 04 =CAB+ECP4-SKTC1 04 =CAB+ECP4/304.8

+12/24VDC SUPPLY OUTPUTS =CAB+ECP4-300F1 05 =CAB+ECP4-SKTC1 05 =CAB+ECP4/300.1

=CAB+ECP4-X44

0VDC GROUND ANALOGUE OUTPUTS =CAB+ECP4-SKTC2 A 06 =CAB+ECP4-SKTC1 06 =CAB+ECP4/300.4

= =CAB+ECP4-SKTC2 B 07 =CAB+ECP4-SKTC1 07 =CAB+ECP4/300.4

Winch Connected =CAB+ECP4-X42 20 08 =CAB+ECP4-SKTC1 08 =CAB+ECP4/301.1

=CAB+ECP4-301K1

Spare 09 =CAB+ECP4-SKTC1 09 =CAB+ECP4/301.3

Line Tension 3 =CAB+DSHB-301R5 SIGN 10 =CAB+ECP4-SKTC1 10 =CAB+ECP4/301.5

Winch In Hole 4 =CAB+DSHB-301J6 A 11 =CAB+ECP4-SKTC1 11 =CAB+ECP4/301.7

Interface Programming (RS232) =CAB+ECP4-X42 - 12 =CAB+ECP4-SKTC1 12 =CAB+ECP4/300.3

0VDC GROUND ANALOGUE OUTPUTS 13 =CAB+ECP4-SKTC1 13 =CAB+ECP4/300.5

= =CAB+ECP4-X42 17 14 =CAB+ECP4-SKTC1 14 =CAB+ECP4/300.7

=CAB+ECP4-X44

0VDC GROUD OUTPUTS =CAB+ECP4-X42 - 15 =CAB+ECP4-SKTC1 15 =CAB+ECP4/300.2

Spare 16 =CAB+ECP4-SKTC1 16 =CAB+ECP4/305.7

= 17 =CAB+ECP4-SKTC1 17 =CAB+ECP4/303.3

Low Speed GY =CAB+DSHB-303S7 18 =CAB+ECP4-SKTC1 18 =CAB+ECP4/303.7

Start Generator GY =CAB+DSHB-303S4 GY 19 =CAB+ECP4-SKTC1 19 =CAB+ECP4/303.5

Start Engine 20 =CAB+ECP4-SKTC1 20 =CAB+ECP4/302.5

Emergency Stop Dashboard BU =CAB+DSHB-302S7 21 =CAB+ECP4-SKTC1 21 =CAB+ECP4/302.7

Throttle Down BU =CAB+DSHB-304S2 BN 22 =CAB+ECP4-SKTC1 22 =CAB+ECP4/304.4

+12/24VDC SUPPLY SENSORS AND MODULE =CAB+ECP4-300F0 23 =CAB+ECP4-SKTC1 23 =CAB+ECP4/300.0

0VDC GROUND ANALOGUE OUTPUTS =CAB+ECP4-300K4 11 24 =CAB+ECP4-SKTC1 24 =CAB+ECP4/300.5

= =CAB+ECP4-X44 32 25 =CAB+ECP4-SKTC1 25 =CAB+ECP4/300.8

=CAB+ECP4-300R9

0VDC GROUND ANALOGUE OUTPUTS =CAB+ECP4-X44 14 26 =CAB+ECP4-SKTC1 26 =CAB+ECP4/300.8

=CAB+ECP4-301K1

Spare 27 =CAB+ECP4-SKTC1 27 =CAB+ECP4/301.2

= 28 =CAB+ECP4-SKTC1 28 =CAB+ECP4/301.4

Winch Speed 3 =CAB+DSHB-301J6 SIGN 29 =CAB+ECP4-SKTC1 29 =CAB+ECP4/301.6

Winch Out Hole 5 =CAB+DSHB-301J6 B 30 =CAB+ECP4-SKTC1 30 =CAB+ECP4/301.8

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
1103 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 1105

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Terminalconnectionlist : =CAB+ECP4#-X44 TERMINAL STRIP X44 JUNCTION BOX = CAB + ECP4 - 1104
0 1 2 3 4 5 6 7 8 9

Terminal connectionlist

=CAB-W89

=CAB-W88

=CAB-W87

=CAB-W98

=CAB-W97

=CAB-W96

=CAB-W95

=CAB-W94

CABLE NAME

CABLE NAME
=CAB+ECP4-X44
TERMINAL STRIP X44 JUNCTION BOX ECP4

Molded-b4 4x1,5 mm²

Molded-b4 4x1,5 mm²

Molded-b4 4x1,5 mm²

RADOX 7x1 mm²

RADOX 7x1 mm²

Molded-b4 4x1,5 mm²

Molded-b4 4x1,5 mm²

Molded-b4 4x1,5 mm²

CABLETYPE

CONNECTION

TERMINAL

CONNECTION

CABLETYPE
FUNCTION CODE EXTERN CODE INTERN PAGE / COLOMN

Spare 31 =CAB+ECP4-SKTC1 31 =CAB+ECP4/305.3

0VDC GROUND ANALOGUE OUTPUTS =CAB+ECP4-X42 16 32 =CAB+ECP4-SKTC1 32 =CAB+ECP4/300.7

=CAB+ECP4-X44

0VDC GROUND ANALOGUE OUTPUTS =CAB+ECP4-X42 - 33 =CAB+ECP4-SKTC1 33 =CAB+ECP4/300.3

+12/24VDC SUPPLY VIA RELAY =CAB+ECP4-X44 05 34 =CAB+ECP4-SKTC1 34 =CAB+ECP4/300.1

Spare 35 =CAB+ECP4-SKTC1 35 =CAB+ECP4/305.8

= 36 =CAB+ECP4-SKTC1 36 =CAB+ECP4/303.1

High Speed BU =CAB+DSHB-303S7 37 =CAB+ECP4-SKTC1 37 =CAB+ECP4/303.8

Winch Stop =CAB+ECP4-200K3 12 38 =CAB+ECP4-SKTC1 38 =CAB+ECP4/302.8

Brake Control GY =CAB+DSHB-304S1 14 39 =CAB+ECP4-SKTC1 39 =CAB+ECP4/304.1

Throttle Up GY =CAB+DSHB-304S2 GY 40 =CAB+ECP4-SKTC1 40 =CAB+ECP4/304.3

Levelwind Up 4 =CAB+DSHB-304J5 A 41 =CAB+ECP4-SKTC1 41 =CAB+ECP4/304.5

Levelwind Down 5 =CAB+DSHB-304J5 B 42 =CAB+ECP4-SKTC1 42 =CAB+ECP4/304.6

Measurehead Left 4 =CAB+DSHB-304J5 A 43 =CAB+ECP4-SKTC1 43 =CAB+ECP4/304.7

Autospooling Off / On GY =CAB+DSHB-302S1 44 =CAB+ECP4-SKTC1 44 =CAB+ECP4/302.1

Wirespray Off / On GY =CAB+DSHB-302S2 45 =CAB+ECP4-SKTC1 45 =CAB+ECP4/302.2

Horn GY =CAB+DSHB-302S3 46 =CAB+ECP4-SKTC1 46 =CAB+ECP4/302.3

Spooling or Slewing 47 =CAB+ECP4-SKTC1 47 =CAB+ECP4/302.4

Horn =CAB+ECP4-305D1 1 48 =CAB+ECP4-SKTC1 48 =CAB+ECP4/305.1

Spare 49 =CAB+ECP4-SKTC1 49 =CAB+ECP4/305.2

= 50 =CAB+ECP4-SKTC1 50 =CAB+ECP4/305.4

= 51 =CAB+ECP4-SKTC1 51 =CAB+ECP4/305.5

= 52 =CAB+ECP4-SKTC1 52 =CAB+ECP4/305.6

= 53 =CAB+ECP4-SKTC1 53 =CAB+ECP4/303.4

= 54 =CAB+ECP4-SKTC1 54 =CAB+ECP4/303.2

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
1104 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 1106

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Terminalconnectionlist : =CAB+ECP4#-X44 TERMINAL STRIP X44 JUNCTION BOX = CAB + ECP4 - 1105
0 1 2 3 4 5 6 7 8 9

Terminal connectionlist

=CAB-W93

CABLE NAME

CABLE NAME
=CAB+ECP4-X44
TERMINAL STRIP X44 JUNCTION BOX ECP4

Molded-b4 4x1,5 mm²

CABLETYPE

CONNECTION

TERMINAL

CONNECTION

CABLETYPE
FUNCTION CODE EXTERN CODE INTERN PAGE / COLOMN

Stop Generator BU =CAB+DSHB-303S4 BN 55 =CAB+ECP4-SKTC1 55 =CAB+ECP4/303.6

+12/24VDC SUPPLY VIA RELAY + =CAB+ECP4-300F2 =CAB+ECP4/300.1

= + =CAB+ECP4-300K4 14 =CAB+ECP4/300.2

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
1105 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 1107

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Terminalconnectionlist : =CAB+ECP4#-X44 TERMINAL STRIP X44 JUNCTION BOX = CAB + ECP4 - 1106
0 1 2 3 4 5 6 7 8 9

Terminal connectionlist

CABLE NAME

CABLE NAME
=CAB+ECP4-X46
TERMINAL STRIP X46 JUNCTION BOX ECP4

CABLETYPE

CONNECTION

TERMINAL

CONNECTION

CABLETYPE
FUNCTION CODE EXTERN CODE INTERN PAGE / COLOMN

+ =CAB+ECP4/200.0

+ =CAB+ECP4/200.0

+ =CAB+ECP4-200F0 =CAB+ECP4/200.0

+ =CAB+ECP4/200.0

+ =CAB+ECP4-X42 3 =CAB+ECP4/200.0

+ =CAB+ECP4/200.0

+ =CAB+ECP4/200.0

+ =CAB+ECP4/200.0

=CAB+ECP4/200.0

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
1106 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 1500

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Terminalconnectionlist : =CAB+ECP4#-X46 TERMINAL STRIP X46 JUNCTION BOX = CAB + ECP4 - 1107
0 1 2 3 4 5 6 7 8 9

Bill of materials
CODE Σ SPECIFICATIONS SUPPLIER PART NUMBER PAGE COLUMN

=CAB+ECP4-305D1 1 DIODE NOV ASEP Elmar A1066383 =CAB+ECP4/305 1

=CAB+ECP4-300F2 1 FUSE HOLDER NOV ASEP Elmar A1079006 =CAB+ECP4/300 1

=CAB+ECP4-300F1 1 FUSE HOLDER NOV ASEP Elmar A1079006 =CAB+ECP4/300 1

=CAB+ECP4-300F0 1 FUSE HOLDER NOV ASEP Elmar A1079006 =CAB+ECP4/300 0

=CAB+ECP4-200F3 1 FUSE HOLDER NOV ASEP Elmar A1079006 =CAB+ECP4/200 4

=CAB+ECP4-200F2 1 FUSE HOLDER NOV ASEP Elmar A1079006 =CAB+ECP4/200 2

=CAB+ECP4-200F0 1 FUSE HOLDER NOV ASEP Elmar A1079006 =CAB+ECP4/200 0

=CAB+ECP4-200F3 1 FUSE 2A NOV ASEP Elmar A1085707 =CAB+ECP4/200 4

=CAB+ECP4-200F0 1 FUSE 4A NOV ASEP Elmar A1085712 =CAB+ECP4/200 0

=CAB+ECP4-300F0 1 FUSE 4A NOV ASEP Elmar A1085712 =CAB+ECP4/300 0

=CAB+ECP4-200F2 1 FUSE 4A NOV ASEP Elmar A1085712 =CAB+ECP4/200 2

=CAB+ECP4-300F2 1 FUSE 10A NOV ASEP Elmar A1085714 =CAB+ECP4/300 1

=CAB+ECP4-300F1 1 FUSE 16A NOV ASEP Elmar A1085715 =CAB+ECP4/300 1

=CAB+ECP4-301K1 1 ELECTRONIC TERMINAL RELAY NOV ASEP Elmar A1029768 =CAB+ECP4/301 1

=CAB+ECP4-305K0 1 ELECTRONIC TERMINAL RELAY NOV ASEP Elmar A1029768 =CAB+ECP4/305 0

=CAB+ECP4-300K4 1 ELECTRONIC TERMINAL RELAY NOV ASEP Elmar A1029768 =CAB+ECP4/300 3

=CAB+ECP4-200K4 1 ELECTRONIC TERMINAL RELAY NOV ASEP Elmar A1029768 =CAB+ECP4/200 4

=CAB+ECP4-200K3 1 ELECTRONIC TERMINAL RELAY NOV ASEP Elmar A1029768 =CAB+ECP4/200 3

=CAB+ECP4-300R9 1 RESISTOR NOV ASEP Elmar A1065791 =CAB+ECP4/300 9

=CAB+ECP4-SKTC2 1 CAP SHELL SIZE 12 NOV ASEP Elmar A1043677 =CAB+ECP4/300 3

=CAB+ECP4-SKTC2 1 RECEPTACLE NOV ASEP Elmar A1083957 =CAB+ECP4/300 3

=CAB+ECP4-300U0 1 CONNECTOR FOR IFM NOV ASEP Elmar A1056781 =CAB+ECP4/300 0

=CAB+ECP4-300U0 1 SAFETY CONTROLLER NOV ASEP Elmar A1066396 =CAB+ECP4/300 0

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
1107 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2500

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Bill of materials electric = CAB + ECP4 - 1500
0 1 2 3 4 5 6 7 8 9

Hazardous area schedule


CODE SERIAL SPECIFICATIONS MANUFAC. / TYPE NUMBER PROT. TYPE / CERTIFICATE VOLTAGE / CURRENT POWER A. NUMBER

A.T.X. S.A. II 2G EEx de IIC T4 250 V


=CAB+ECP4-200F0 Fuse holder EEx de (Fuse Carrier) max 40A A1079006
909069 + 096299 LCIE 02 ATEX 0003 U 2A

A.T.X. S.A. II 2G EEx de IIC T4 250 V


=CAB+ECP4-200F2 Fuse holder EEx de (Fuse Carrier) max 40A A1079006
909069 + 096299 LCIE 02 ATEX 0003 U 2A

A.T.X. S.A. II 2G EEx de IIC T4 250 V


=CAB+ECP4-200F3 Fuse holder EEx de (Fuse Carrier) max 40A A1079006
909069 + 096299 LCIE 02 ATEX 0003 U 2A

Wago Ex II 3 GD EEx nA nC II T4 24 VDC


=CAB+ECP4-200K3 Electronic Terminal Relay 24VDC EEx nC A1029768
859-304 02 ATEX 132280 U 10m A 320mW

Wago Ex II 3 GD EEx nA nC II T4 24 VDC


=CAB+ECP4-200K4 Electronic Terminal Relay 24VDC EEx nC A1029768
859-304 02 ATEX 132280 U 10m A 320mW

A.T.X. S.A. II 2G EEx de IIC T4 250 V


=CAB+ECP4-300F0 Fuse holder EEx de (Fuse Carrier) max 40A A1079006
909069 + 096299 LCIE 02 ATEX 0003 U 2A

A.T.X. S.A. II 2G EEx de IIC T4 250 V


=CAB+ECP4-300F1 Fuse holder EEx de (Fuse Carrier) max 40A A1079006
909069 + 096299 LCIE 02 ATEX 0003 U 2A

A.T.X. S.A. II 2G EEx de IIC T4 250 V


=CAB+ECP4-300F2 Fuse holder EEx de (Fuse Carrier) max 40A A1079006
909069 + 096299 LCIE 02 ATEX 0003 U 2A

Wago Ex II 3 GD EEx nA nC II T4 24 VDC


=CAB+ECP4-300K4 Electronic Terminal Relay 24VDC EEx nC A1029768
859-304 02 ATEX 132280 U 10m A 320mW

ASEP B.V. II 3 G ATEX EEx nA II T3 U


=CAB+ECP4-300R9 Resistor in clamp 120 Ohm Ex 3 G nA A1065791
[EX] MF25 120R-Multicomp CRT-D1167129 A

ASEP B.V. II 3 G Ex nA nC II T 3
[EX] Epsilon Certified Safety controller IFM and Connector EX II 3
=CAB+ECP4-300U0 A1066396
G n II T3
[EX] ECOMAT100 CR7020 EX II 3 G n II T3 EPSILON07ATEX2224X A

Wago Ex II 3 GD EEx nA nC II T4 24 VDC


=CAB+ECP4-301K1 Electronic Terminal Relay 24VDC EEx nC A1029768
859-304 02 ATEX 132280 U 10m A 320mW

ASEP B.V. II3G EEx nA II T3


=CAB+ECP4-305D1 DIODE dubble 2x 28,4A 45V (Vf:0,52V) II3G EEx nA II T3 A1066383
[EX] STPS12045TV EPSILON 07ATEX 2238U A

Wago Ex II 3 GD EEx nA nC II T4 24 VDC


=CAB+ECP4-305K0 Electronic Terminal Relay 24VDC EEx nC A1029768
859-304 02 ATEX 132280 U 10m A 320mW

ASEP B.V. II 3G Ex nA II T3
=CAB+ECP4-SKTC2 Mil Receptacle 10P Shell size 12 EEx nA (II 3G Ex nA II T3) A1083957
[EX] 62LC-12E12-10SN(771)-Amphenol EPSILON07ATEX2240X A

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
1500 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE +ECP6/1

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Hazardous area schedule = CAB + ECP4 - 2500
0 1 2 3 4 5 6 7 8 9

National Oilwell Varco Corporate Headquarters 7909 Parkwood Circle Dr. Houston, TX 77036 Phone: 1 888 262 8645 www.NOV.com/ASEPElmar

Cabin

ECP6 = CAB 2x115V 80A SUPPLIES


8501036012/1

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
+ECP4/2500 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 30

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 24.Feb.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Frontpage = CAB + ECP6 - 1
0 1 2 3 4 5 6 7 8 9

TERMINAL STRIP NUMBERING CONNECTORS

=CAB+ECP6-X61 = TERMINAL STRIP X61 JUNCTION BOX ECP6

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
1 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 100

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 28.Jan.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Terminal Strips & Connectors = CAB + ECP6 - 30
0 1 2 3 4 5 6 7 8 9

+-ECP6 L1--JB6 / 101.0


8501036012-1 N1--JB6 / 101.0
L2--JB6 / 101.0
N2--JB6 / 101.0

1 N
-100F0 1 3 1 3 -100F1 -100F7
Main Main Dehumidifier
Supply Supply 16A 30mA
L1 2 4 2 4 L2 C-kar
80A C-kar 80A C-kar A1109273
8501040894 8501040894
2 N.

-100F5A -100F5B
Frequency Frequency
1A 1A
A0000934 A0000934
A0020441 A0020441
A0020442 A0020442

-100F4A -100F4B
Voltage Voltage
Line B Line B
-100T1 1A 1A
150/5A A0000934 A0000934
A1081424 A0020441 A0020441
A0020442 A0020442
-100F3A -100F3B
Voltage Voltage AC AC.
-100T0
Line A Line A
150/5A
A1081424
1A 1A -100U5
A0000934 A0000934
A0020441 + -
A0020441
A0020442 A0020442

-100P1 x1 -100P2 x1 -100P3 x1 -100P4 x1 -100P5 x1


LINE A LINE B LINE A LINE B FREQUENCY
CURRENT A CURRENT A VOLTAGE V VOLTAGE V A1061346 Hz
150/5A 150/5A A1061348 A1061348
A1061339 x2 A1061339 x2 x2 x2 x2

LINE A LINE B LINE A LINE B


PE PE
X61 1 2 3 4 X61 5 6

Non Zone Non Zone

W53 1 2 3 4 SH W54 1 2 GN/YE


+/20.2 +/20.2

-100X7 L N PE
A1016387
+/20.2
+ECP2/100.9 / -L1-JB6-1

+ECP2/100.9 / -N1-JB6-1

+ECP2/100.9 / -L2-JB6-1

+ECP2/100.9 / -N2-JB6-1

+ECP2/100.9 / -PE-JB6-1

L1 L2 PE

-100A7
115V/60Hz
A1093830
Dehumidifier
+/20.2
Supply Switch Off
By Gas or Fire Alarm

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
30 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 101

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 15.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : 230V Supply's = CAB + ECP6 - 100
0 1 2 3 4 5 6 7 8 9

100.9 / L1--JB6 L1--JB6 / 102.0


100.9 / N1--JB6 N1--JB6 / 102.0
100.9 / L2--JB6 L2--JB6 / 102.0
100.9 / N2--JB6 N2--JB6 / 102.0

1 N 1 N
-101F1 -101F4
Wall Wall
Sockets 1-3 Sockets 4-7
16A 30mA 16A 30mA
C-kar C-kar
A1109273 A1109273
2 N. 2 N.

PE PE PE PE PE PE PE
X61 7 8 9 10 11 12 X61 13 14 15 16 17 18 19 20

Non Zone Non Zone

W55 1 2 GN/YE W56 1 2 GN/YE W57 1 2 GN/YE W58 1 2 GN/YE W59 1 2 GN/YE W60 1 2 GN/YE W61 1 2 GN/YE
+/20.2 +/20.3 +/20.3 +/20.3 +/20.4 +/20.4 +/20.5

L N PE L N PE L N PE L N PE L N PE L N PE L N PE

-101X1 -101X2 -101X3 -101X4 -101X5 -101X6 -101X7


(101F1) (101F1) (101F1) (101F4) (101F4) (101F4) Depth Panel
230V NZ 230V NZ 230V NZ 115V NZ 115V NZ 115V NZ (101F4)
(Double WS) (Double WS) (Double WS) (Double WS) (Double WS) (Double WS) 115V NZ
A1103319 A1103319 A1103319 A0013687 A0013687 A0013687 (Double WS)
A0013687

Wall socket 1 Wall socket 2 Wall socket 3 Wall socket 4 Wall socket 5 Wall socket 6 Wall socket 7
(230VAC) (230VAC) (230VAC) (115VAC) (115VAC) (115VAC) (115VAC)

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
100 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 102

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 14.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : 115/230V Supply Wallsockets = CAB + ECP6 - 101
0 1 2 3 4 5 6 7 8 9

101.9 / L1--JB6 L1-JB6


101.9 / N1--JB6 N1-JB6
101.9 / L2--JB6 L2-JB6
101.9 / N2--JB6 N2-JB6

-102F2 1 3 -102F3 1 3 -102F4 1 3 -102F5 1 3 -102F6 1 3 -102F7 1 3 -102F8 1 3


System 1 AC 1 AC 2 / DC 1,2 AC 3 AC 2 / DC 1,2 AC 1 System 2
Left Left Left 230V Right Right Right
115V 115V 230V 50A D-kar 230V 115V 115V
2 4 2 4 2 4 2 4 2 4 2 4 2 4
32A D-kar 32A D-kar 32A D-kar 8501040895 32A D-kar 32A D-kar 32A D-kar
8501040832 8501040832 8501040832 8501040832 8501040832 8501040832

PE PE PE PE PE PE PE

Non Zone Non Zone

W62 1 2 GN/YE W63 1 2 GN/YE W64 1 2 GN/YE W65 1 2 GN/YE W66 1 2 GN/YE W67 1 2 GN/YE W68 1 2 GN/YE
+/20.8 +/20.9 +/20.9 +/20.10 +/20.10 +/20.10 +/20.11
+CPRK

-102U2 -102U3 -102U4 -102U5 -102U6 -102U7 -102U8


HBL 2611 HBL 2611 HBL 2620 HBL 2620 HBL 2620 HBL 2611 HBL 2611
A1089095 A1089095 A1104567 A1104567 A1104567 A1089095 A1089095
A1086472 A1086472 A1112622 A1112622 A1112622 A1086472 A1086472
+/20.8 +/20.9 +/20.9 +/20.10 +/20.10 +/20.10 +/20.11

SYSTEM 1 AC 1 AC 2 / DC 1,2 AC 3 AC 2 / DC 1,2 AC 1 System 2

Left Sockets Right


Provided by HES

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
101 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 103

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 14.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : 115/230V Supply Computer System = CAB + ECP6 - 102
0 1 2 3 4 5 6 7 8 9

115VAC 60Hz
L1-JB6
N1-JB6
115VAC 60Hz
L2-JB6
N2-JB6

1 3 1 3 1 3 1 3
-103F2 -103F4 -103F6 -103F8
Airco 1 Airco 2 Airco 3 Airco 4
25A C-kar 20A C-kar 25A C-kar 20A C-kar
2 4 2 4 2 4 2 4
8501040074 8501040075 8501040074 8501040075

PE PE PE PE PE
X61 21 22 23 24 X61 25 26 X61 27 28 X61 29 30 X61 31 32
EEx e EEx e

W136 1 2 3 4 SH -103U6.1
+/20.5 Thermostat
+/20.7
1 2 3

1 2 3 W78.1
+/20.7
+ECP2/100.9 / -L1-JB6-2

+ECP2/100.9 / -N1-JB6-2

+ECP2/100.9 / -L2-JB6-2

+ECP2/100.9 / -N2-JB6-2

+ECP2/100.9 / -PE-JB6-2

W74 1 2 3 W75 1 2 3 4 5 W76 1 2 3 W78 1 2 3 1 2 3 4 5 W79 W80 1 2 3


+/20.5 +/20.5 +/20.6 +/20.7 +/20.7 +/20.7

1 2 PE 1 4 5 3 4 5 7 PE 1 2 PE 3 4 5 6 PE 1 2 PE 1 4 5 3 4 5 7 PE 1 2 PE 3 4 5 6 PE

-103U2 -103U4 -103U6 -103U8


115V/60Hz 115V/60Hz 115V/60Hz 115V/60Hz
ATEX ATEX ATEX ATEX
Cabin airco 1 A1041909 Cabin airco 2 A1041909 Cabin airco 3 A1041909 Cabin airco 4 A1041909
Supply Switch Off +/20.5 +/20.6 +/20.7 +/20.7
By Gas or Fire Alarm

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
102 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 1100
Cabin airco
C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 14.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Airco Supply = CAB + ECP6 - 103
0 1 2 3 4 5 6 7 8 9

Terminal connectionlist

=CAB-W60

=CAB-W59

=CAB-W58

=CAB-W57

=CAB-W56

=CAB-W55

=CAB-W54

=CAB-W53

CABLE NAME

CABLE NAME
=CAB+ECP6-X61
TERMINAL STRIP X61 JUNCTION BOX ECP6

CC600 3x2,5 mm²

CC600 3x2,5 mm²

CC600 3x2,5 mm²

CC600 3x2,5 mm²

CC600 3x2,5 mm²

CC600 3x2,5 mm²

CC600 3x2,5 mm²

Radox 5x25 mm²

CABLETYPE

CONNECTION

TERMINAL

CONNECTION

CABLETYPE
FUNCTION CODE EXTERN CODE INTERN PAGE / COLOMN

1 =CAB+ECP2-X21 4 1 =CAB+ECP6-100F0 2 =CAB+ECP6/100.0

2 =CAB+ECP2-X21 5 2 =CAB+ECP6-100F0 4 =CAB+ECP6/100.0

3 =CAB+ECP2-X21 6 3 =CAB+ECP6-100F1 2 =CAB+ECP6/100.0

4 =CAB+ECP2-X21 7 4 =CAB+ECP6-100F1 4 =CAB+ECP6/100.1

SH =CAB+ECP2-X21 PE PE =CAB+ECP6/100.1

Dehumidifier 1 =CAB+-100X7 L 5 =CAB+ECP6-100F7 2 =CAB+ECP6/100.7

= 2 =CAB+-100X7 N 6 =CAB+ECP6-100F7 N. =CAB+ECP6/100.7

= GN/YE =CAB+-100X7 PE PE =CAB+ECP6/100.8

Wall socket 1 (230VAC) 1 =CAB+-101X1 L 7 =CAB+ECP6-101F1 2 =CAB+ECP6/101.1

= 2 =CAB+-101X1 N 8 =CAB+ECP6-101F1 N. =CAB+ECP6/101.1

= GN/YE =CAB+-101X1 PE PE =CAB+ECP6/101.1

Wall socket 2 (230VAC) 1 =CAB+-101X2 L 9 =CAB+ECP6-X61 7 =CAB+ECP6/101.2

= 2 =CAB+-101X2 N 10 =CAB+ECP6-X61 8 =CAB+ECP6/101.2

= GN/YE =CAB+-101X2 PE PE =CAB+ECP6/101.2

Wall socket 3 (230VAC) 1 =CAB+-101X3 L 11 =CAB+ECP6-X61 9 =CAB+ECP6/101.3

= 2 =CAB+-101X3 N 12 =CAB+ECP6-X61 10 =CAB+ECP6/101.3

= GN/YE =CAB+-101X3 PE PE =CAB+ECP6/101.3

Wall socket 4 (115VAC) 1 =CAB+-101X4 L 13 =CAB+ECP6-101F4 2 =CAB+ECP6/101.4

= 2 =CAB+-101X4 N 14 =CAB+ECP6-101F4 N. =CAB+ECP6/101.4

= GN/YE =CAB+-101X4 PE PE =CAB+ECP6/101.4

Wall socket 5 (115VAC) 1 =CAB+-101X5 L 15 =CAB+ECP6-X61 13 =CAB+ECP6/101.5

= 2 =CAB+-101X5 N 16 =CAB+ECP6-X61 14 =CAB+ECP6/101.5

= GN/YE =CAB+-101X5 PE PE =CAB+ECP6/101.5

Wall socket 6 (115VAC) 1 =CAB+-101X6 L 17 =CAB+ECP6-X61 15 =CAB+ECP6/101.6

= 2 =CAB+-101X6 N 18 =CAB+ECP6-X61 16 =CAB+ECP6/101.6

= GN/YE =CAB+-101X6 PE PE =CAB+ECP6/101.6

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
103 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 1101

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Terminalconnectionlist : =CAB+ECP6#-X61 TERMINAL STRIP X61 JUNCTION BOX = CAB + ECP6 - 1100
0 1 2 3 4 5 6 7 8 9

Terminal connectionlist

=CAB-W68

=CAB-W67

=CAB-W66

=CAB-W65

=CAB-W64

=CAB-W63

=CAB-W62

=CAB-W61

CABLE NAME

CABLE NAME
=CAB+ECP6-X61
TERMINAL STRIP X61 JUNCTION BOX ECP6

CC600 3x6 mm²

CC600 3x6 mm²

CC600 3x6 mm²

CC600 3x10 mm²

CC600 3x6 mm²

CC600 3x6 mm²

CC600 3x6 mm²

CC600 3x2,5 mm²

CABLETYPE

CONNECTION

TERMINAL

CONNECTION

CABLETYPE
FUNCTION CODE EXTERN CODE INTERN PAGE / COLOMN

Wall socket 7 (115VAC) 1 =CAB+-101X7 L 19 =CAB+ECP6-X61 17 =CAB+ECP6/101.7

= 2 =CAB+-101X7 N 20 =CAB+ECP6-X61 18 =CAB+ECP6/101.7

= GN/YE =CAB+-101X7 PE PE =CAB+ECP6/101.7

GN/YE =CAB+CPRK-102U2 PE =CAB+ECP6/102.2

Left GN/YE =CAB+CPRK-102U3 PE =CAB+ECP6/102.3

= GN/YE =CAB+CPRK-102U4 PE =CAB+ECP6/102.4

Sockets Provided by HES GN/YE =CAB+CPRK-102U5 PE =CAB+ECP6/102.5

= GN/YE =CAB+CPRK-102U6 PE =CAB+ECP6/102.6

Right GN/YE =CAB+CPRK-102U7 PE =CAB+ECP6/102.7

= GN/YE =CAB+CPRK-102U8 PE =CAB+ECP6/102.8

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
1100 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 1102

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Terminalconnectionlist : =CAB+ECP6#-X61 TERMINAL STRIP X61 JUNCTION BOX = CAB + ECP6 - 1101
0 1 2 3 4 5 6 7 8 9

Terminal connectionlist

=CAB-W80

=CAB-W78

=CAB-W76

=CAB-W74

=CAB-W136

CABLE NAME

CABLE NAME
=CAB+ECP6-X61
TERMINAL STRIP X61 JUNCTION BOX ECP6

RADOX 3x2,5 mm²

RADOX 3x2,5 mm²

RADOX 3x2,5 mm²

RADOX 3x2,5 mm²

RADOX 4x10 mm²

CABLETYPE

CONNECTION

TERMINAL

CONNECTION

CABLETYPE
FUNCTION CODE EXTERN CODE INTERN PAGE / COLOMN

1 =CAB+ECP2-X21 4 21 =CAB+ECP6-103F2 1 =CAB+ECP6/103.0

2 =CAB+ECP2-X21 5 22 =CAB+ECP6-103F2 3 =CAB+ECP6/103.0

3 =CAB+ECP2-X21 6 23 =CAB+ECP6-103F4 1 =CAB+ECP6/103.0

4 =CAB+ECP2-X21 7 24 =CAB+ECP6-103F4 3 =CAB+ECP6/103.1

SH =CAB+ECP2-X21 PE PE =CAB+ECP6/103.1

Cabin airco 1 1 =CAB+-103U2 1 25 =CAB+ECP6-103F2 2 =CAB+ECP6/103.2

= 2 =CAB+-103U2 2 26 =CAB+ECP6-103F2 4 =CAB+ECP6/103.2

= 3 =CAB+-103U2 PE PE =CAB+ECP6/103.2

Cabin airco 2 1 =CAB+-103U4 1 27 =CAB+ECP6-103F4 2 =CAB+ECP6/103.4

= 2 =CAB+-103U4 2 28 =CAB+ECP6-103F4 4 =CAB+ECP6/103.4

= 3 =CAB+-103U4 PE PE =CAB+ECP6/103.4

Cabin airco 3 1 =CAB+-103U6 1 29 =CAB+ECP6-103F6 2 =CAB+ECP6/103.6

= 2 =CAB+-103U6 2 30 =CAB+ECP6-103F6 4 =CAB+ECP6/103.6

= 3 =CAB+-103U6 PE PE =CAB+ECP6/103.6

Cabin airco 4 1 =CAB+-103U8 1 31 =CAB+ECP6-103F8 2 =CAB+ECP6/103.8

= 2 =CAB+-103U8 2 32 =CAB+ECP6-103F8 4 =CAB+ECP6/103.8

= 3 =CAB+-103U8 PE PE =CAB+ECP6/103.8

Right L1-JB6 =CAB+ECP6-102F7 1 =CAB+ECP6/102.9

Cabin airco 4 L1-JB6 =CAB+ECP6-103F8 1 =CAB+ECP6/103.9

Right L2-JB6 =CAB+ECP6-102F8 1 =CAB+ECP6/102.9

Cabin airco 4 L2-JB6 =CAB+ECP6-103F6 1 =CAB+ECP6/103.9

Right N1-JB6 =CAB+ECP6-102F7 3 =CAB+ECP6/102.9

Cabin airco 4 N1-JB6 =CAB+ECP6-103F8 3 =CAB+ECP6/103.9

Right N2-JB6 =CAB+ECP6-102F8 3 =CAB+ECP6/102.9

Cabin airco 4 N2-JB6 =CAB+ECP6-103F6 3 =CAB+ECP6/103.9

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
1101 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 1500

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Terminalconnectionlist : =CAB+ECP6#-X61 TERMINAL STRIP X61 JUNCTION BOX = CAB + ECP6 - 1102
0 1 2 3 4 5 6 7 8 9

Bill of materials
CODE Σ SPECIFICATIONS SUPPLIER PART NUMBER PAGE COLUMN

=CAB+ECP6-103F2 1 MCB NOV ASEP Elmar 8501040074 =CAB+ECP6/103 2

=CAB+ECP6-103F6 1 MCB NOV ASEP Elmar 8501040074 =CAB+ECP6/103 6

=CAB+ECP6-103F4 1 MCB NOV ASEP Elmar 8501040075 =CAB+ECP6/103 4

=CAB+ECP6-103F8 1 MCB NOV ASEP Elmar 8501040075 =CAB+ECP6/103 8

=CAB+ECP6-102F4 1 MCB NOV ASEP Elmar 8501040832 =CAB+ECP6/102 4

=CAB+ECP6-102F8 1 MCB NOV ASEP Elmar 8501040832 =CAB+ECP6/102 8

=CAB+ECP6-102F7 1 MCB NOV ASEP Elmar 8501040832 =CAB+ECP6/102 7

=CAB+ECP6-102F6 1 MCB NOV ASEP Elmar 8501040832 =CAB+ECP6/102 6

=CAB+ECP6-102F2 1 MCB NOV ASEP Elmar 8501040832 =CAB+ECP6/102 2

=CAB+ECP6-102F3 1 MCB NOV ASEP Elmar 8501040832 =CAB+ECP6/102 3

=CAB+ECP6-100F1 1 MCB NOV ASEP Elmar 8501040894 =CAB+ECP6/100 0

=CAB+ECP6-100F0 1 MCB NOV ASEP Elmar 8501040894 =CAB+ECP6/100 0

=CAB+ECP6-102F5 1 MCB NOV ASEP Elmar 8501040895 =CAB+ECP6/102 5

=CAB+ECP6-100F3B 1 GLAS FUSE NOV ASEP Elmar A0000934 =CAB+ECP6/100 3

=CAB+ECP6-100F3A 1 GLAS FUSE NOV ASEP Elmar A0000934 =CAB+ECP6/100 3

=CAB+ECP6-100F5B 1 GLAS FUSE NOV ASEP Elmar A0000934 =CAB+ECP6/100 4

=CAB+ECP6-100F5A 1 GLAS FUSE NOV ASEP Elmar A0000934 =CAB+ECP6/100 4

=CAB+ECP6-100F4B 1 GLAS FUSE NOV ASEP Elmar A0000934 =CAB+ECP6/100 4

=CAB+ECP6-100F4A 1 GLAS FUSE NOV ASEP Elmar A0000934 =CAB+ECP6/100 3

=CAB+ECP6-100F3A 1 CLAMP NOV ASEP Elmar A0020441 =CAB+ECP6/100 3

=CAB+ECP6-100F3B 1 CLAMP NOV ASEP Elmar A0020441 =CAB+ECP6/100 3

=CAB+ECP6-100F4B 1 CLAMP NOV ASEP Elmar A0020441 =CAB+ECP6/100 4

=CAB+ECP6-100F4A 1 CLAMP NOV ASEP Elmar A0020441 =CAB+ECP6/100 3

=CAB+ECP6-100F5B 1 CLAMP NOV ASEP Elmar A0020441 =CAB+ECP6/100 4

=CAB+ECP6-100F5A 1 CLAMP NOV ASEP Elmar A0020441 =CAB+ECP6/100 4

=CAB+ECP6-100F3A 1 FUSE HOLDER NOV ASEP Elmar A0020442 =CAB+ECP6/100 3

=CAB+ECP6-100F4B 1 FUSE HOLDER NOV ASEP Elmar A0020442 =CAB+ECP6/100 4

=CAB+ECP6-100F4A 1 FUSE HOLDER NOV ASEP Elmar A0020442 =CAB+ECP6/100 3

=CAB+ECP6-100F3B 1 FUSE HOLDER NOV ASEP Elmar A0020442 =CAB+ECP6/100 3

=CAB+ECP6-100F5B 1 FUSE HOLDER NOV ASEP Elmar A0020442 =CAB+ECP6/100 4

=CAB+ECP6-100F5A 1 FUSE HOLDER NOV ASEP Elmar A0020442 =CAB+ECP6/100 4

=CAB+ECP6-100F7 1 MCB-RCD NOV ASEP Elmar A1109273 =CAB+ECP6/100 7

=CAB+ECP6-101F1 1 MCB-RCD NOV ASEP Elmar A1109273 =CAB+ECP6/101 1

=CAB+ECP6-101F4 1 MCB-RCD NOV ASEP Elmar A1109273 =CAB+ECP6/101 4

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
1102 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 1501

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Bill of materials electric = CAB + ECP6 - 1500
0 1 2 3 4 5 6 7 8 9

Bill of materials
CODE Σ SPECIFICATIONS SUPPLIER PART NUMBER PAGE COLUMN

=CAB+ECP6-100P2 1 AMPERE METER NOV ASEP Elmar A1061339 =CAB+ECP6/100 2

=CAB+ECP6-100P1 1 AMPERE METER NOV ASEP Elmar A1061339 =CAB+ECP6/100 1

=CAB+ECP6-100P5 1 FREQUENCY METER NOV ASEP Elmar A1061346 =CAB+ECP6/100 4

=CAB+ECP6-100P3 1 VOLT METER NOV ASEP Elmar A1061348 =CAB+ECP6/100 3

=CAB+ECP6-100P4 1 VOLT METER NOV ASEP Elmar A1061348 =CAB+ECP6/100 3

=CAB+ECP6-100T1 1 CURRENT TRANSFORMER NOV ASEP Elmar A1081424 =CAB+ECP6/100 0

=CAB+ECP6-100T0 1 CURRENT TRANSFORMER NOV ASEP Elmar A1081424 =CAB+ECP6/100 0

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
1500 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE +EJB10/1

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Bill of materials electric = CAB + ECP6 - 1501
0 1 2 3 4 5 6 7 8 9

National Oilwell Varco Corporate Headquarters 7909 Parkwood Circle Dr. Houston, TX 77036 Phone: 1 888 262 8645 www.NOV.com/ASEPElmar

Cabin

EJB 500x160x100 SS ATX ASSY INSIDE


8501036547/1
EJB10 Cabin RIG SIGNALS

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
+ECP6/1501 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 1100

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 11.Aug.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Frontpage = CAB + EJB10 - 1
0 1 2 3 4 5 6 7 8 9

Terminal connectionlist

=CAB-W44

=CAB-W43

=CAB-W42

=CAB-W41

=CAB-W40

CABLE NAME

CABLE NAME
=CAB+EJB10-X102
TERMINAL STRIP X102 JUNCTION BOX EJB10

RADOX 12x1,5 mm²

RADOX 5x1,5 mm²

RADOX 12x1,5 mm²

RADOX 12x1,5 mm²

RADOX 5x1,5 mm²

CABLETYPE

CONNECTION

TERMINAL

CONNECTION

CABLETYPE
FUNCTION CODE EXTERN CODE INTERN PAGE / COLOMN

Phone 1 =CAB+EJB11-X112 1 1 =CAB/61.0

= 2 =CAB+EJB11-X112 2 2 =CAB/61.0

= 3 =CAB+EJB11-X112 3 3 =CAB/61.0

= 4 =CAB+EJB11-X112 4 4 =CAB/61.0

= 5 =CAB+EJB11-X112 5 5 =CAB/61.0

Rig Floor Display 1 =CAB+EJB11-X112 6 6 =CAB/61.1

= 2 =CAB+EJB11-X112 7 7 =CAB/61.1

= 3 =CAB+EJB11-X112 8 8 =CAB/61.1

= 4 =CAB+EJB11-X112 9 9 =CAB/61.1

= 5 =CAB+EJB11-X112 10 10 =CAB/61.1

= 6 =CAB+EJB11-X112 11 11 =CAB/61.2

= 7 =CAB+EJB11-X112 12 12 =CAB/61.2

= 8 =CAB+EJB11-X112 13 13 =CAB/61.2

= 9 =CAB+EJB11-X112 14 14 =CAB/61.2

= 10 =CAB+EJB11-X112 15 15 =CAB/61.2

= 11 =CAB+EJB11-X112 16 16 =CAB/61.2

= 12 =CAB+EJB11-X112 17 17 =CAB/61.2

Ethernet 1 =CAB+EJB11-X112 18 18 =CAB/61.3

= 2 =CAB+EJB11-X112 19 19 =CAB/61.3

= 3 =CAB+EJB11-X112 20 20 =CAB/61.3

= 4 =CAB+EJB11-X112 21 21 =CAB/61.3

= 5 =CAB+EJB11-X112 22 22 =CAB/61.3

= 6 =CAB+EJB11-X112 23 23 =CAB/61.4

= 7 =CAB+EJB11-X112 24 24 =CAB/61.4

= 8 =CAB+EJB11-X112 25 25 =CAB/61.4

= 9 =CAB+EJB11-X112 26 26 =CAB/61.4

= 10 =CAB+EJB11-X112 27 27 =CAB/61.4

= 11 =CAB+EJB11-X112 28 28 =CAB/61.4

= 12 =CAB+EJB11-X112 29 29 =CAB/61.5

Intercom 1 =CAB+EJB11-X112 30 30 =CAB/61.5

= 2 =CAB+EJB11-X112 31 31 =CAB/61.5

= 3 =CAB+EJB11-X112 32 32 =CAB/61.5

= 4 =CAB+EJB11-X112 33 33 =CAB/61.5

= 5 =CAB+EJB11-X112 34 34 =CAB/61.6

Spare 1 =CAB+EJB11-X112 35 35 =CAB/61.6

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
1 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 1101

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Terminalconnectionlist : =CAB+EJB10#-X102 TERMINAL STRIP X102 JUNCTION = CAB + EJB10 - 1100
0 1 2 3 4 5 6 7 8 9

Terminal connectionlist

=CAB-W45

=CAB-W44

CABLE NAME

CABLE NAME
=CAB+EJB10-X102
TERMINAL STRIP X102 JUNCTION BOX EJB10

COAX 1x1,5 mm²

RADOX 12x1,5 mm²

CABLETYPE

CONNECTION

TERMINAL

CONNECTION

CABLETYPE
FUNCTION CODE EXTERN CODE INTERN PAGE / COLOMN

Spare 2 =CAB+EJB11-X112 36 36 =CAB/61.6

= 3 =CAB+EJB11-X112 37 37 =CAB/61.6

= 4 =CAB+EJB11-X112 38 38 =CAB/61.6

= 5 =CAB+EJB11-X112 39 39 =CAB/61.7

= 6 =CAB+EJB11-X112 40 40 =CAB/61.7

= 7 =CAB+EJB11-X112 41 41 =CAB/61.7

= 8 =CAB+EJB11-X112 42 42 =CAB/61.7

= 9 =CAB+EJB11-X112 43 43 =CAB/61.7

= 10 =CAB+EJB11-X112 44 44 =CAB/61.7

= 11 =CAB+EJB11-X112 45 45 =CAB/61.8

= 12 =CAB+EJB11-X112 46 46 =CAB/61.8

Coax - =CAB+EJB11-X112 47 47 =CAB/61.8

= scr =CAB-W45 scr 48 =CAB/61.8

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
1100 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 1500

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Terminalconnectionlist : =CAB+EJB10#-X102 TERMINAL STRIP X102 JUNCTION = CAB + EJB10 - 1101
0 1 2 3 4 5 6 7 8 9

Bill of materials
CODE Σ SPECIFICATIONS SUPPLIER PART NUMBER PAGE COLUMN

=CAB+EJB10 1 BOX 500X160X100 NOV ASEP Elmar A1060082 =CAB+/61 0

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
1101 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2500

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Bill of materials electric = CAB + EJB10 - 1500
0 1 2 3 4 5 6 7 8 9

Hazardous area schedule


CODE SERIAL SPECIFICATIONS MANUFAC. / TYPE NUMBER PROT. TYPE / CERTIFICATE VOLTAGE / CURRENT POWER A. NUMBER

Index Elektro B.V. Ex 2 G Ex e II T6


=CAB+EJB10 RVS Junctionbox 500X160X100 EEx e A1060082
A1060082 IBExU 99 ATEX 1096 A

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
1500 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE +EJB11/1

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Hazardous area schedule = CAB + EJB10 - 2500
0 1 2 3 4 5 6 7 8 9

National Oilwell Varco Corporate Headquarters 7909 Parkwood Circle Dr. Houston, TX 77036 Phone: 1 888 262 8645 www.NOV.com/ASEPElmar

Cabin

EJB 500x160x100 SS ATX ASSY OUTSIDE


8501036547/1
EJB11 Cabin RIG SIGNALS

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
+EJB10/2500 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 1100

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 11.Aug.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Frontpage = CAB + EJB11 - 1
0 1 2 3 4 5 6 7 8 9

Terminal connectionlist

CABLE NAME

CABLE NAME

=CAB-W40

=CAB-W41

=CAB-W42

=CAB-W43
=CAB+EJB11-X112
TERMINAL STRIP X112 JUNCTION BOX EJB11

CABLETYPE

CONNECTION

TERMINAL

CONNECTION

CABLETYPE

RADOX 5x1,5 mm²

RADOX 12x1,5 mm²

RADOX 12x1,5 mm²

RADOX 5x1,5 mm²


FUNCTION CODE EXTERN CODE INTERN PAGE / COLOMN

Phone 1 =CAB+EJB10-X102 1 1 =CAB/61.0

= 2 =CAB+EJB10-X102 2 2 =CAB/61.0

= 3 =CAB+EJB10-X102 3 3 =CAB/61.0

= 4 =CAB+EJB10-X102 4 4 =CAB/61.0

= 5 =CAB+EJB10-X102 5 5 =CAB/61.0

Rig Floor Display 6 =CAB+EJB10-X102 6 1 =CAB/61.1

= 7 =CAB+EJB10-X102 7 2 =CAB/61.1

= 8 =CAB+EJB10-X102 8 3 =CAB/61.1

= 9 =CAB+EJB10-X102 9 4 =CAB/61.1

= 10 =CAB+EJB10-X102 10 5 =CAB/61.1

= 11 =CAB+EJB10-X102 11 6 =CAB/61.2

= 12 =CAB+EJB10-X102 12 7 =CAB/61.2

= 13 =CAB+EJB10-X102 13 8 =CAB/61.2

= 14 =CAB+EJB10-X102 14 9 =CAB/61.2

= 15 =CAB+EJB10-X102 15 10 =CAB/61.2

= 16 =CAB+EJB10-X102 16 11 =CAB/61.2

= 17 =CAB+EJB10-X102 17 12 =CAB/61.2

Ethernet 18 =CAB+EJB10-X102 18 1 =CAB/61.3

= 19 =CAB+EJB10-X102 19 2 =CAB/61.3

= 20 =CAB+EJB10-X102 20 3 =CAB/61.3

= 21 =CAB+EJB10-X102 21 4 =CAB/61.3

= 22 =CAB+EJB10-X102 22 5 =CAB/61.3

= 23 =CAB+EJB10-X102 23 6 =CAB/61.4

= 24 =CAB+EJB10-X102 24 7 =CAB/61.4

= 25 =CAB+EJB10-X102 25 8 =CAB/61.4

= 26 =CAB+EJB10-X102 26 9 =CAB/61.4

= 27 =CAB+EJB10-X102 27 10 =CAB/61.4

= 28 =CAB+EJB10-X102 28 11 =CAB/61.4

= 29 =CAB+EJB10-X102 29 12 =CAB/61.5

Intercom 30 =CAB+EJB10-X102 30 1 =CAB/61.5

= 31 =CAB+EJB10-X102 31 2 =CAB/61.5

= 32 =CAB+EJB10-X102 32 3 =CAB/61.5

= 33 =CAB+EJB10-X102 33 4 =CAB/61.5

= 34 =CAB+EJB10-X102 34 5 =CAB/61.6

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
1 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 1101

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Terminalconnectionlist : =CAB+EJB11#-X112 TERMINAL STRIP X112 JUNCTION = CAB + EJB11 - 1100
0 1 2 3 4 5 6 7 8 9

Terminal connectionlist

=CAB-W112

CABLE NAME

CABLE NAME

=CAB-W44

=CAB-W45

=CAB-W112
=CAB+EJB11-X112
TERMINAL STRIP X112 JUNCTION BOX EJB11

RADOX 25x1,5 mm²

CABLETYPE

CONNECTION

TERMINAL

CONNECTION

CABLETYPE

RADOX 12x1,5 mm²

COAX 1x1,5 mm²

RADOX 25x1,5 mm²


FUNCTION CODE EXTERN CODE INTERN PAGE / COLOMN

Spare 35 =CAB+EJB10-X102 35 1 =CAB/61.6

= 36 =CAB+EJB10-X102 36 2 =CAB/61.6

= 37 =CAB+EJB10-X102 37 3 =CAB/61.6

= 38 =CAB+EJB10-X102 38 4 =CAB/61.6

= 39 =CAB+EJB10-X102 39 5 =CAB/61.7

= 40 =CAB+EJB10-X102 40 6 =CAB/61.7

= 41 =CAB+EJB10-X102 41 7 =CAB/61.7

= 42 =CAB+EJB10-X102 42 8 =CAB/61.7

= 43 =CAB+EJB10-X102 43 9 =CAB/61.7

= 44 =CAB+EJB10-X102 44 10 =CAB/61.7

= 45 =CAB+EJB10-X102 45 11 =CAB/61.8

= 46 =CAB+EJB10-X102 46 12 =CAB/61.8

Coax 47 =CAB+EJB10-X102 47 - =CAB/61.8

= 48 =CAB-W45 scr =CAB/61.8

Low Gas Alarm 49 =CAB+ECP2-X22 21 1 =CAB+ECP2/201.0

= 50 =CAB+ECP2-X22 22 2 =CAB+ECP2/201.1

= 51 =CAB+ECP2-X22 23 3 =CAB+ECP2/201.1

High Gas Alarm 52 =CAB+ECP2-X22 24 4 =CAB+ECP2/201.1

= 53 =CAB+ECP2-X22 25 5 =CAB+ECP2/201.1

= 54 =CAB+ECP2-X22 26 6 =CAB+ECP2/201.1

Smoke Alarm 55 =CAB+ECP2-X22 27 7 =CAB+ECP2/201.2

= 56 =CAB+ECP2-X22 28 8 =CAB+ECP2/201.2

= 57 =CAB+ECP2-X22 29 9 =CAB+ECP2/201.2

Loss Of Pressure 58 =CAB+ECP2-X22 30 10 =CAB+ECP2/201.2

= 59 =CAB+ECP2-X22 31 11 =CAB+ECP2/201.2

= 60 =CAB+ECP2-X22 32 12 =CAB+ECP2/201.3

General Fault 61 =CAB+ECP2-X22 33 13 =CAB+ECP2/201.3

= 62 =CAB+ECP2-X22 34 14 =CAB+ECP2/201.3

= 63 =CAB+ECP2-X22 35 15 =CAB+ECP2/201.3

PA SPEAKER 64 =CAB+ECP2-X22 36 16 =CAB+ECP2/201.4

= 65 =CAB+ECP2-X22 sp 17 =CAB+ECP2/201.4

Remote Emergency Shutdown 18 =CAB+ECP2-X22 37 66 =CAB+ECP2/201.4

= 19 =CAB+ECP2-X22 38 67 =CAB+ECP2/201.4

= sp =CAB+ECP2-X22 sp 20 =CAB+ECP2/201.5

= sp =CAB+ECP2-X22 sp 21 =CAB+ECP2/201.5

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
1100 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 1102

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Terminalconnectionlist : =CAB+EJB11#-X112 TERMINAL STRIP X112 JUNCTION = CAB + EJB11 - 1101
0 1 2 3 4 5 6 7 8 9

Terminal connectionlist

CABLE NAME

CABLE NAME

=CAB-W112
=CAB+EJB11-X112
TERMINAL STRIP X112 JUNCTION BOX EJB11

CABLETYPE

CONNECTION

TERMINAL

CONNECTION

CABLETYPE

RADOX 25x1,5 mm²


FUNCTION CODE EXTERN CODE INTERN PAGE / COLOMN

Remote Emergency Shutdown sp =CAB+ECP2-X22 sp 22 =CAB+ECP2/201.5

Spare sp =CAB+ECP2-X22 sp 23 =CAB+ECP2/201.5

= sp =CAB+ECP2-X22 sp 24 =CAB+ECP2/201.5

= PE =CAB+ECP2-X22 PE 25 =CAB+ECP2/201.5

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
1101 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 1500

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Terminalconnectionlist : =CAB+EJB11#-X112 TERMINAL STRIP X112 JUNCTION = CAB + EJB11 - 1102
0 1 2 3 4 5 6 7 8 9

Bill of materials
CODE Σ SPECIFICATIONS SUPPLIER PART NUMBER PAGE COLUMN

=CAB+EJB11 1 BOX 500X160X100 NOV ASEP Elmar A1060082 =CAB+/61 0

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
1102 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2500

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Bill of materials electric = CAB + EJB11 - 1500
0 1 2 3 4 5 6 7 8 9

Hazardous area schedule


CODE SERIAL SPECIFICATIONS MANUFAC. / TYPE NUMBER PROT. TYPE / CERTIFICATE VOLTAGE / CURRENT POWER A. NUMBER

Index Elektro B.V. Ex 2 G Ex e II T6


=CAB+EJB11 RVS Junctionbox 500X160X100 EEx e A1060082
A1060082 IBExU 99 ATEX 1096 A

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
1500 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE +EJB14/1

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Hazardous area schedule = CAB + EJB11 - 2500
0 1 2 3 4 5 6 7 8 9

National Oilwell Varco Corporate Headquarters 7909 Parkwood Circle Dr. Houston, TX 77036 Phone: 1 888 262 8645 www.NOV.com/ASEPElmar

Cabin

EJB 110x75x55 POLY ATX ASSY


A1070273
EJB14 = Door switch

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
+EJB11/2500 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 1100

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 11.Aug.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Frontpage = CAB + EJB14 - 1
0 1 2 3 4 5 6 7 8 9

Terminal connectionlist

=CAB-W137

=CAB-W103

=CAB-W104

CABLE NAME

CABLE NAME
=CAB+EJB14-X142
TERMINAL STRIP X142 JUNCTION BOX EJB14

Molded-b4 4x1,5 mm²

RADOX 3x1 mm²

Molded-b4 4x1,5 mm²

CABLETYPE

CONNECTION

TERMINAL

CONNECTION

CABLETYPE
FUNCTION CODE EXTERN CODE INTERN PAGE / COLOMN

Spare BN =CAB+-301S8 BN 1 =CAB+ECP2/301.8

1 =CAB+ECP2-X22

DOOR OPEN BN =CAB+-301S9 BN 2 =CAB+ECP2/301.8

= 3 =CAB+ECP2-X22 - 3 =CAB+ECP2/301.8

= 2 =CAB+ECP2-X22 47 4 =CAB+ECP2/301.9

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
1 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 1500

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Terminalconnectionlist : =CAB+EJB14#-X142 TERMINAL STRIP X142 JUNCTION = CAB + EJB14 - 1100
0 1 2 3 4 5 6 7 8 9

Bill of materials
CODE Σ SPECIFICATIONS SUPPLIER PART NUMBER PAGE COLUMN

=CAB+EJB14 1 EJB 110x75x55 NOV ASEP Elmar A1070273 =CAB+ECP2/301 8

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
1100 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2500

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Bill of materials electric = CAB + EJB14 - 1500
0 1 2 3 4 5 6 7 8 9

Hazardous area schedule


CODE SERIAL SPECIFICATIONS MANUFAC. / TYPE NUMBER PROT. TYPE / CERTIFICATE VOLTAGE / CURRENT POWER A. NUMBER

Bartec Nederland B.V. Ex II 2G EXe II T5


=CAB+EJB14 EJB 110x75x55 POLY ATX ASSY A1070273
07-5103-1100/7555 2xM16-B PTB 08 ATEX 1064 A

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
1500 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE +DSHB/1

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Hazardous area schedule = CAB + EJB14 - 2500
0 1 2 3 4 5 6 7 8 9

National Oilwell Varco Corporate Headquarters 7909 Parkwood Circle Dr. Houston, TX 77036 Phone: 1 888 262 8645 www.NOV.com/ASEPElmar

Cabin

Dashboard

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
+EJB14/2500 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 31

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 11.Aug.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Frontpage = CAB + DSHB - 1
0 1 2 3 4 5 6 7 8 9

CONNECTORS

=CAB+DSHB-300P4-A = A Cantrak
=CAB+DSHB-PLGA = PLGA Cantrak
=CAB+DSHB-210U0 = Operator Panel
=CAB+DSHB-210U8 = Kerr Backup Display
=CAB+DSHB-J1 = J1 Power Supply 12-24V
=CAB+DSHB-J2 = J2 Loadcell
=CAB+DSHB-J3 = J3 Encoder 1
=CAB+DSHB-J4 = J4 MMD
=CAB+DSHB-J5 = J5 Encoder 2
=CAB+DSHB-J9 = J9 Tension Contact
=CAB+DSHB-P33 = P33 Encoder 3

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
1 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 210

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 15.Aug.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Connectors = CAB + DSHB - 31
0 1 2 3 4 5 6 7 8 9

+DSHB
Kerr Backup
Encoder 3

-210U0 -210U8
OPERATOR Kerr Backup
PANEL Display
AMS4A043 AM5KP112
A1058684 A1050574

12-24V ENCODER ENCODER LOADCELL TENSION MMD 12-24V ENCODER


SUPPLY 1 2 1 CONTACT SUPPLY 3

J1 1 2 J5 J4 J9 J9 D E C J2 A B C D E F G H P33 C D E F
J L C E A B F J L C E A B F /210.5
A B C E G J A

W120 1 2 W206 1 2 3 4 5 6 W207 1 2 3 4 5 6 W208 1 2 3 4 5 6 W209 1 2 3 4 5 6 7 8 W232 BN BU GN/YE W233 1 2 3 4


+/21.1 +/21.1 +/21.2 +/21.1 +/21.3 +/21.0 +/21.0
+ECP4/200.1 / -OP-12VDC

+ECP4/200.1 / -OP-0VDC

+ECP4/200.1 / -BP-12VDC

+ECP4/200.2 / -BP-0VDC

+ECP4/200.2 / -BP-EARTH
+

+/21.1 +/21.2 +/21.1 +/21.3 +/21.0


A1082717 A1082717 A1082717 A1082717 A1082716
A1058275 A1068685 A1068686 A1068686 A1068684
Encoder 1 A B C D E G F Encoder 2 A B C D E G F Loadpin A B C D E F G H J K MMD A B C D E F G H J K Encoder 3 A B C D E F
SKT51 SKT52 SKT50 SKT56 SKT53
+BLKH

+BLKH/200.4

+BLKH/200.2

+BLKH/200.0

+BLKH/200.2

+BLKH/200.0
+/21.1 +/21.2 +/21.1 +/21.3 +/21.11 +/21.0
+BLKH/200.4 +BLKH/200.2 +BLKH/200.4 +BLKH/200.0 +BLKH/200.2 +BLKH/200.0
Encoder 1 Encoder 2 Loadpin MMD Intercom 1 Encoder 3
SKT51a A B C D E G F SKT52a A B C D E G F SKT50a A B C D E F G H J K SKT56a A B C D E F G H J K SKT57a A B C D E F SKT53a A B C D E F

PLG57
Intercom 1 A B C D E F
A1068678
A1082716

WRL 1 2
+/21.11

-210W7
+/21.11

W180 1 2
+/21.11
Connections to: Connections to: Connections to: Connections to: Connections to:
WNCH page 210 WNCH page 210 WNCH page 210 WNCH page 210 x1 WNCH page 210

x2
-210Z7
A1070818
+/21.11
Encoder 1
Loadpin Encoder 2
Loadpin Loadpin Loadpin
MMD Encoder 3
Loadpin
Intercom Speaker

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
31 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 1500

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 13.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Operator Panel = CAB + DSHB - 210
0 1 2 3 4 5 6 7 8 9

Bill of materials
CODE Σ SPECIFICATIONS SUPPLIER PART NUMBER PAGE COLUMN

=CAB+DSHB-J9 1 PLUG 10P NOV ASEP Elmar A1061789 =CAB+DSHB/210 4

=CAB+DSHB-J2 1 SOCKET 10P NOV ASEP Elmar A1061791 =CAB+DSHB/210 5

=CAB+DSHB-J9 1 SOCKET 10P NOV ASEP Elmar A1061791 =CAB+DSHB/210 5

=CAB+DSHB-304J5 1 JOYSTICK NOV ASEP Elmar A1065965 =CAB+ECP4/304 5

=CAB+DSHB-301J6 1 JOYSTICK NOV ASEP Elmar A1065967 =CAB+ECP4/301 6

=CAB+DSHB-J5 1 PLUG 12P NOV ASEP Elmar A1068692 =CAB+DSHB/210 0

=CAB+DSHB-J4 1 PLUG 12P NOV ASEP Elmar A1068692 =CAB+DSHB/210 2

=CAB+DSHB-J1 1 SOCKET 3S NOV ASEP Elmar A1068695 =CAB+DSHB/210 0

=CAB+DSHB-300P4 1 CANTRAK NOV ASEP Elmar A1066395 =CAB+ECP4/300 4

=CAB+DSHB-300P4 1 PLUG NOV ASEP Elmar A1061630 =CAB+ECP4/300 4

=CAB+DSHB-300P4 1 WEDGE NOV ASEP Elmar A1061631 =CAB+ECP4/300 4

=CAB+DSHB-P33 1 PLUG 12P NOV ASEP Elmar A1068692 =CAB+DSHB/210 9

=CAB+DSHB-301R5 1 ROTARY KNOB NOV ASEP Elmar A1065966 =CAB+ECP4/301 5

=CAB+DSHB-302S3 1 SWITCH NOV ASEP Elmar A1030262 =CAB+ECP4/302 3

=CAB+DSHB-302S6 1 SWITCH NOV ASEP Elmar A1030262 =CAB+ECP4/302 6

=CAB+DSHB-302S3 1 PUSH BUTTON NOV ASEP Elmar A0021202 =CAB+ECP4/302 3

=CAB+DSHB-302S6 1 PUSH BUTTON NOV ASEP Elmar A0021202 =CAB+ECP4/302 6

=CAB+DSHB-302S7 1 EMERGENCY STOP NOV ASEP Elmar A0021203 =CAB+ECP4/302 7

=CAB+DSHB-303S7 1 SWITCH MODULES 2XNO NOV ASEP Elmar A0021395 =CAB+ECP4/303 7

=CAB+DSHB-303S7 1 SWITCH NOV ASEP Elmar A0021205 =CAB+ECP4/303 7

=CAB+DSHB-200S8 1 SWITCH NOV ASEP Elmar A1016540 =CAB+ECP4/200 8

=CAB+DSHB-304S1 1 SWITCH NOV ASEP Elmar A1016540 =CAB+ECP4/304 1

=CAB+DSHB-302S2 1 SWITCH NOV ASEP Elmar A1016540 =CAB+ECP4/302 2

=CAB+DSHB-302S1 1 SWITCH NOV ASEP Elmar A1016540 =CAB+ECP4/302 1

=CAB+DSHB-302S8 1 SWITCH NOV ASEP Elmar A1030262 =CAB+ECP4/302 8

=CAB+DSHB-303S4 1 SWITCH NOV ASEP Elmar A1030262 =CAB+ECP4/303 5

=CAB+DSHB-200S8 1 SWITCH NOV ASEP Elmar A1030262 =CAB+ECP4/200 8

=CAB+DSHB-302S1 1 SWITCH NOV ASEP Elmar A1030262 =CAB+ECP4/302 1

=CAB+DSHB-302S2 1 SWITCH NOV ASEP Elmar A1030262 =CAB+ECP4/302 2

=CAB+DSHB-302S7 1 SWITCH NOV ASEP Elmar A1030262 =CAB+ECP4/302 7

=CAB+DSHB-304S1 1 SWITCH NOV ASEP Elmar A1030262 =CAB+ECP4/304 1

=CAB+DSHB-304S2 1 SWITCH NOV ASEP Elmar A1036467 =CAB+ECP4/304 3

=CAB+DSHB-303S4 1 PUSH BUTTON EX DOUBL NOV ASEP Elmar A1040349 =CAB+ECP4/303 5

=CAB+DSHB-304S2 1 PUSH BUTTON EX DOUBL NOV ASEP Elmar A1040349 =CAB+ECP4/304 3

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
210 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 1501

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Bill of materials electric = CAB + DSHB - 1500
0 1 2 3 4 5 6 7 8 9

Bill of materials
CODE Σ SPECIFICATIONS SUPPLIER PART NUMBER PAGE COLUMN

=CAB+DSHB-304S2 1 THROTTLE INDICATION NOV ASEP Elmar A1054749 =CAB+ECP4/304 3

=CAB+DSHB-302S8 1 PUSHBUTTON NOV ASEP Elmar A1064561 =CAB+ECP4/302 8

=CAB+DSHB-210U8 1 BenchMark Wireline Products A1050574 =CAB+DSHB/210 8

=CAB+DSHB-210U0 1 OPERATOR PANEL NOV ASEP Elmar A1058684 =CAB+DSHB/210 0

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
1500 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2500

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Bill of materials electric = CAB + DSHB - 1501
0 1 2 3 4 5 6 7 8 9

Hazardous area schedule


CODE SERIAL SPECIFICATIONS MANUFAC. / TYPE NUMBER PROT. TYPE / CERTIFICATE VOLTAGE / CURRENT POWER A. NUMBER

Bartec Nederland B.V. II 2 G EEx d IIC T6


=CAB+DSHB-200S8 EX"d" Switch elm NO+NC cable 3mtr. A1030262
07-3323-3403 PTB00ATEX1092 A

Bartec Nederland B.V. Ex II 2 G EEx e II


=CAB+DSHB-200S8 EX 2 POS switch EX 90° 05-0003-000901 A1016540
05-0003-000901 PTB 00 ATEX 3114 U A

BenchMark Wireline Products Ex II 3G EEx nA II T6


=CAB+DSHB-210U8 Backup depth panel AM5KP112 Ex II 3G EEx nA II T6 A1050574
AM5KP112 Epsilon Ex 02ATEX1128 A

ASEP B.V. II 3 G Ex nA nL IIB T4


CANTRAK 2610 and Connector EX II 3 G n II T3 [EX] Epsilon
=CAB+DSHB-300P4 A1066395
Certified
[EX] CANtrak2610+Connector II3G n II T3 EPSILON 07 ATEX 2227X A

Joysticks II 3 G ATEX Ex nA IIB T4 X


=CAB+DSHB-301J6 Certified Artidor Single axis joystick M115, option 67, EEx nA (IFM) A1065967
M115SL15FD67 CRT-D1179880 A

P-Q Controls Inc. II 3 G ATEX EEx nA IIB T4 X


Certified Artidor Rotary knob, hall effect, with 0,5-4,5V output,
=CAB+DSHB-301R5 A1065966
10-30VDC input EEx nA (IFM)
RH112CW-105 S/N 061215 CRT-D1179843 A

Bartec Nederland B.V. II 2 G EEx d IIC T6


=CAB+DSHB-302S1 EX"d" Switch elm NO+NC cable 3mtr. A1030262
07-3323-3403 PTB00ATEX1092 A

Bartec Nederland B.V. Ex II 2 G EEx e II


=CAB+DSHB-302S1 EX 2 POS switch EX 90° 05-0003-000901 A1016540
05-0003-000901 PTB 00 ATEX 3114 U A

Bartec Nederland B.V. II 2 G EEx d IIC T6


=CAB+DSHB-302S2 EX"d" Switch elm NO+NC cable 3mtr. A1030262
07-3323-3403 PTB00ATEX1092 A

Bartec Nederland B.V. Ex II 2 G EEx e II


=CAB+DSHB-302S2 EX 2 POS switch EX 90° 05-0003-000901 A1016540
05-0003-000901 PTB 00 ATEX 3114 U A

Bartec Nederland B.V. II 2 G EEx d IIC T6


=CAB+DSHB-302S3 EX"d" Switch elm NO+NC cable 3mtr. A1030262
07-3323-3403 PTB00ATEX1092 A

Bartec Nederland B.V. II 2 G EEx e II -- --


=CAB+DSHB-302S3 EX Push button (red, green, yellow or white) A0021202
05-0003-000700 PTB 00 ATEX 3114 U -- A

Bartec Nederland B.V. II 2 G EEx d IIC T6


=CAB+DSHB-302S6 EX"d" Switch elm NO+NC cable 3mtr. A1030262
07-3323-3403 PTB00ATEX1092 A

Bartec Nederland B.V. II 2 G EEx e II -- --


=CAB+DSHB-302S6 EX Push button (red, green, yellow or white) A0021202
05-0003-000700 PTB 00 ATEX 3114 U -- A

Bartec Nederland B.V. II 2 G EEx d IIC T6


=CAB+DSHB-302S7 EX"d" Switch elm NO+NC cable 3mtr. A1030262
07-3323-3403 PTB00ATEX1092 A

Bartec Nederland B.V. II 2 G EEx e II -- --


=CAB+DSHB-302S7 EX Emergency stop A0021203
05-0003-000800 PTB 00 ATEX 3114 U -- A

Bartec Nederland B.V. II 2 G EEx d IIC T6


=CAB+DSHB-302S8 EX"d" Switch elm NO+NC cable 3mtr. A1030262
07-3323-3403 PTB00ATEX1092 A

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
1501 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2501

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Hazardous area schedule = CAB + DSHB - 2500
0 1 2 3 4 5 6 7 8 9

Hazardous area schedule


CODE SERIAL SPECIFICATIONS MANUFAC. / TYPE NUMBER PROT. TYPE / CERTIFICATE VOLTAGE / CURRENT POWER A. NUMBER

Bartec Nederland B.V. II 2 G EEx d IIC T6


=CAB+DSHB-303S4 EX"d" Switch elm NO+NC cable 3mtr. A1030262
07-3323-3403 PTB00ATEX1092 A

Bartec Nederland B.V. Ex II 2G EEx e II


=CAB+DSHB-303S4 EX Double Push Button A1040349
05-0003-00 7400 PTB 00 ATEX 3114 U A

Bartec Nederland B.V. EEx d IIC T6


=CAB+DSHB-303S7 EX"d" Switch elm 2xNO cable 8mtr. A0021395
07-3323-3208 PTB 00 ATEX 1092 X A

Bartec Nederland B.V. II2G EEXe II


=CAB+DSHB-303S7 EX 3 POS switch A0021205
05-0003-001000 PTB 00 ATEX 3114 U A

Joysticks II 3 G ATEX EEx nA IIB T4 X


=CAB+DSHB-304J5 Single handle multi axis joystick M212, option 56, EEx nA A1065965
M212S15S5656 CRT.D1179865 A

Bartec Nederland B.V. II 2 G EEx d IIC T6


=CAB+DSHB-304S1 EX"d" Switch elm NO+NC cable 3mtr. A1030262
07-3323-3403 PTB00ATEX1092 A

Bartec Nederland B.V. Ex II 2 G EEx e II


=CAB+DSHB-304S1 EX 2 POS switch EX 90° 05-0003-000901 A1016540
05-0003-000901 PTB 00 ATEX 3114 U A

Bartec Nederland B.V. II 2 G EEx d IIC T6


=CAB+DSHB-304S2 EX"d" Switch elm NO+NO cable 3mtr. A1036467
07-3323-3203 PTB00ATEX1092 A

Bartec Nederland B.V. Ex II 2G EEx e II


=CAB+DSHB-304S2 EX Double Push Button A1040349
05-0003-00 7400 PTB 00 ATEX 3114 U A

Amphenol Ex II 3 G nA II T3
=CAB+DSHB-J1 EX Straight socket, 3S, Shell size 12 (KPSE series) A1068695
83302170 EPSILON 07 ATEX 2240X A

Amphenol Ex II 3 G Ex nA II T3
=CAB+DSHB-J4 EX Straight plug, 12P, Shell size 14 (KPSE series) A1068692
83302167 EPSILON 07 ATEX 2240X A

Amphenol Ex II 3 G Ex nA II T3
=CAB+DSHB-J5 EX Straight plug, 12P, Shell size 14 (KPSE series) A1068692
83302167 EPSILON 07 ATEX 2240X A

Amphenol Ex II 3 G Ex nA II T3
=CAB+DSHB-P33 EX Straight plug, 12P, Shell size 14 (KPSE series) A1068692
83302167 EPSILON 07 ATEX 2240X A

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2500 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE +CPRK/1

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Hazardous area schedule = CAB + DSHB - 2501
0 1 2 3 4 5 6 7 8 9

National Oilwell Varco Corporate Headquarters 7909 Parkwood Circle Dr. Houston, TX 77036 Phone: 1 888 262 8645 www.NOV.com/ASEPElmar

Cabin

Computer Rack

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
+DSHB/2501 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 31

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 11.Aug.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Frontpage = CAB + CPRK - 1
0 1 2 3 4 5 6 7 8 9

CONNECTORS

=CAB+CPRK#-200U2-SKT20 = SKT20 12VDC Supply Shooting Panel


=CAB+CPRK#-200U4-SKT21 = SKT21 12VDC Supply WHM
=CAB+CPRK#-214U3-SP = SP

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
1 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 1500

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 24.Aug.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Connectors = CAB + CPRK - 31
0 1 2 3 4 5 6 7 8 9

Bill of materials
CODE Σ SPECIFICATIONS SUPPLIER PART NUMBER PAGE COLUMN

=CAB+CPRK-200U2 4 SOCKET NOV ASEP Elmar A0019437 =CAB+ECP2/200 2

=CAB+CPRK-200U4 4 SOCKET INLET NOV ASEP Elmar A0019438 =CAB+ECP2/200 4

=CAB+CPRK-200U4 4 SOCKET NOV ASEP Elmar A0019437 =CAB+ECP2/200 4

=CAB+CPRK-200U2 4 SOCKET INLET NOV ASEP Elmar A0019438 =CAB+ECP2/200 2

=CAB+CPRK-200U4 1 BOX 120x122x90 NOV ASEP Elmar A0020257 =CAB+ECP2/200 4

=CAB+CPRK-200U2 1 BOX 120x122x90 NOV ASEP Elmar A0020257 =CAB+ECP2/200 2

=CAB+CPRK-102U3 1 PLUG 2P NOV ASEP Elmar A1086472 =CAB+ECP6/102 3

=CAB+CPRK-102U2 1 PLUG 2P NOV ASEP Elmar A1086472 =CAB+ECP6/102 2

=CAB+CPRK-102U7 1 PLUG 2P NOV ASEP Elmar A1086472 =CAB+ECP6/102 7

=CAB+CPRK-102U8 1 PLUG 2P NOV ASEP Elmar A1086472 =CAB+ECP6/102 8

=CAB+CPRK-102U7 1 RECEPTACLE 2P NOV ASEP Elmar A1089095 =CAB+ECP6/102 7

=CAB+CPRK-102U8 1 RECEPTACLE 2P NOV ASEP Elmar A1089095 =CAB+ECP6/102 8

=CAB+CPRK-102U3 1 RECEPTACLE 2P NOV ASEP Elmar A1089095 =CAB+ECP6/102 3

=CAB+CPRK-102U2 1 RECEPTACLE 2P NOV ASEP Elmar A1089095 =CAB+ECP6/102 2

=CAB+CPRK-102U5 1 RECEPTACLE 2P NOV ASEP Elmar A1104567 =CAB+ECP6/102 5

=CAB+CPRK-102U4 1 RECEPTACLE 2P NOV ASEP Elmar A1104567 =CAB+ECP6/102 4

=CAB+CPRK-102U6 1 RECEPTACLE 2P NOV ASEP Elmar A1104567 =CAB+ECP6/102 6

=CAB+CPRK-102U4 1 PLUG 2P NOV ASEP Elmar A1112622 =CAB+ECP6/102 4

=CAB+CPRK-102U5 1 PLUG 2P NOV ASEP Elmar A1112622 =CAB+ECP6/102 5

=CAB+CPRK-102U6 1 PLUG 2P NOV ASEP Elmar A1112622 =CAB+ECP6/102 6

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
31 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE +BLKH/1

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Bill of materials electric = CAB + CPRK - 1500
0 1 2 3 4 5 6 7 8 9

National Oilwell Varco Corporate Headquarters 7909 Parkwood Circle Dr. Houston, TX 77036 Phone: 1 888 262 8645 www.NOV.com/ASEPElmar

Cabin

Bulkhead

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
+CPRK/1500 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 31

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 11.Aug.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Frontpage = CAB + BLKH - 1
0 1 2 3 4 5 6 7 8 9

Bulkhead Socket-Plug Definities Zone 2

WELLHEAD
MONITOR GREEN LIGHT RF ANTENNA =CAB+BLKH-PLG50a = PLG50a Bulkhead Loadcell
=CAB+BLKH-SKT50a =
=CAB+BLKH-PLG51a = PLG51a Bulkhead Encoder 2
=CAB+BLKH-SKT51a =
62 61 63 =CAB+BLKH-PLG52a = PLG52a Bulkhead Encoder 3
=CAB+BLKH-SKT52a =
=CAB+BLKH-PLG53a = PLG53a Bulkhead Encoder 1
=CAB+BLKH-SKT53a =
=CAB+BLKH-PLG54a = PLG54a Bulkhead Rig Display
=CAB+BLKH-SKT54a =
MARK =CAB+BLKH-PLG55a = PLG54a Bulkhead Mark Intensifier
INTENSIFIER SP/ DLL RIG DISPLAY =CAB+BLKH-SKT55a =
=CAB+BLKH-PLG56a = PLG56a Bulkhead Mark Detector
=CAB+BLKH-SKT56a =
=CAB+BLKH-PLG57a = PLG57a Bulkhead Intercom 1
55 59 54 =CAB+BLKH-SKT57a =

=CAB+BLKH-PLG59a = PLG59a Bulkhead SP/DLL


=CAB+BLKH-SKT59a =

=CAB+BLKH-PLG61a = PLG61a Bulkhead Green Light


ENCODER 1 ENCODER 2 ENCODER 3 =CAB+BLKH-SKT61a =
=CAB+BLKH-PLG62a = PLG62a Bulkhead Wellhead monitor
=CAB+BLKH-SKT62a =
51 52 53 =CAB+BLKH-SKT63a = SKT63a Bulkhead RF Antenna
=CAB+BLKH-SKT63a =

MARK
DETECTOR INTERCOM LOAD CELL

56 57 50
MMD

A1097290

FRONT
(Winch side)

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
1 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 200

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 20.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Connectors = CAB + BLKH - 31
0 1 2 3 4 5 6 7 8 9

+BLKH

Bulkhead Socket-Plug Zone 2

+/250.2
A1061220 +/250.4
A1068671 A1058159
Wellhead A1068670 /200.4
Monitor Green light RF Antenna WELLHEAD
SKT62a SKT61a SKT63a MONITOR GREEN LIGHT RF ANTENNA

Drawing on page: Drawing on page: Drawing on page:

+/250.3 +/250.4 62 61 63

+/21.12 MARK
A1061220 +/214.3 INTENSIFIER SP/ DLL RIG DISPLAY
A1068671 A1058159 A1058159
Mark A1068670 A1068673
Intensifier SP/DLL Rig Display
SKT55a SKT59a SKT54a

Drawing on page: Drawing on page: Drawing on page:


55 59 54
+/214.3

+/21.0 +/21.2 +/21.1 ENCODER 1 ENCODER 2 ENCODER 3


+DSHB/210.9 +DSHB/210.2 +DSHB/210.0
A1058158 A1058159 A1058159
A1068672 A1068673 A1068673
Encoder 1 Encoder 2 Encoder 3
SKT53a SKT52a SKT51a 51 52 53
Drawing on page: Drawing on page: Drawing on page:

+DSHB/210.9 +DSHB/210.3 +DSHB/210.1

MARK
DETECTOR INTERCOM LOAD CELL

+/21.3 +/21.11 +/21.1


+DSHB/210.5 +DSHB/210.7 +DSHB/210.4
A1058159
A1068674
A1058158
A1068672
A1058159
A1068674 56 57 50
MMD Intercom 1 Loadpin MMD
SKT56a SKT57a SKT50a

Drawing on page: Drawing on page: Drawing on page:

+DSHB/210.7 +DSHB/210.8 +DSHB/210.5

A1097290

FRONT
(Winch side)

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
31 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 1500

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 20.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Connectors Bulkhead = CAB + BLKH - 200
0 1 2 3 4 5 6 7 8 9

Bill of materials
CODE Σ SPECIFICATIONS SUPPLIER PART NUMBER PAGE COLUMN

=CAB+BLKH-SKT57a 1 DUST CAP+CHAIN (R) NOV ASEP Elmar A1058158 =CAB+BLKH/200 2

=CAB+BLKH-SKT53a 1 DUST CAP+CHAIN (R) NOV ASEP Elmar A1058158 =CAB+BLKH/200 0

=CAB+BLKH-SKT54a 1 RECEPTACLE 8PS NOV ASEP Elmar A1068673 =CAB+BLKH/200 4

=CAB+BLKH-SKT52a 1 DUST CAP+CHAIN (R) NOV ASEP Elmar A1058159 =CAB+BLKH/200 2

=CAB+BLKH-SKT56a 1 DUST CAP+CHAIN (R) NOV ASEP Elmar A1058159 =CAB+BLKH/200 0

=CAB+BLKH-SKT59a 1 DUST CAP+CHAIN (R) NOV ASEP Elmar A1058159 =CAB+BLKH/200 2

=CAB+BLKH-SKT61a 1 DUST CAP+CHAIN (R) NOV ASEP Elmar A1058159 =CAB+BLKH/200 2

=CAB+BLKH-SKT54a 1 DUST CAP+CHAIN (R) NOV ASEP Elmar A1058159 =CAB+BLKH/200 4

=CAB+BLKH-SKT50a 1 DUST CAP+CHAIN (R) NOV ASEP Elmar A1058159 =CAB+BLKH/200 4

=CAB+BLKH-SKT51a 1 DUST CAP+CHAIN (R) NOV ASEP Elmar A1058159 =CAB+BLKH/200 4

=CAB+BLKH-SKT62a 1 DUST CAP+CHAIN (R) NOV ASEP Elmar A1061220 =CAB+BLKH/200 0

=CAB+BLKH-SKT55a 1 DUST CAP+CHAIN (R) NOV ASEP Elmar A1061220 =CAB+BLKH/200 0

=CAB+BLKH-SKT61a 1 RECEPTACLE 3PS NOV ASEP Elmar A1068670 =CAB+BLKH/200 2

=CAB+BLKH-SKT59a 1 RECEPTACLE 3PS NOV ASEP Elmar A1068670 =CAB+BLKH/200 2

=CAB+BLKH-SKT62a 1 RECEPTACLE 5PS NOV ASEP Elmar A1068671 =CAB+BLKH/200 0

=CAB+BLKH-SKT55a 1 RECEPTACLE 5PS NOV ASEP Elmar A1068671 =CAB+BLKH/200 0

=CAB+BLKH-SKT53a 1 RECEPTACLE 6PS NOV ASEP Elmar A1068672 =CAB+BLKH/200 0

=CAB+BLKH-SKT57a 1 RECEPTACLE 6PS NOV ASEP Elmar A1068672 =CAB+BLKH/200 2

=CAB+BLKH-SKT51a 1 RECEPTACLE 8PS NOV ASEP Elmar A1068673 =CAB+BLKH/200 4

=CAB+BLKH-SKT52a 1 RECEPTACLE 8PS NOV ASEP Elmar A1068673 =CAB+BLKH/200 2

=CAB+BLKH-SKT50a 1 RECEPTACLE 10PS NOV ASEP Elmar A1068674 =CAB+BLKH/200 4

=CAB+BLKH-SKT56a 1 RECEPTACLE 10PS NOV ASEP Elmar A1068674 =CAB+BLKH/200 0

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
200 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2500

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Bill of materials electric = CAB + BLKH - 1500
0 1 2 3 4 5 6 7 8 9

Hazardous area schedule


CODE SERIAL SPECIFICATIONS MANUFAC. / TYPE NUMBER PROT. TYPE / CERTIFICATE VOLTAGE / CURRENT POWER A. NUMBER

ASEP B.V. Ex ll 3G Ex nA ll T3
=CAB+BLKH-SKT50a EX Thru Bulkhead Receptacle 10PS, Shell size 12 A1068674
PTB12-10PS (Ex nA) Epsilon 07 ATEX 2240X A

ASEP B.V. Ex ll 3G Ex nA ll T3
=CAB+BLKH-SKT51a EX Thru Bulkhead receptacle 8PS, Shell size 12 A1068673
PTB12-8PS (Ex nA) Epsilon 07 ATEX 2240X A

ASEP B.V. Ex ll 3G Ex nA ll T3
=CAB+BLKH-SKT52a EX Thru Bulkhead receptacle 8PS, Shell size 12 A1068673
PTB12-8PS (Ex nA) Epsilon 07 ATEX 2240X A

NOV ASEP Elmar Ex ll 3G Ex nA ll T3


=CAB+BLKH-SKT53a RECEPTACLE 6PS E10 BULKHEAD ATX A1068672
PTB10-6PS (Ex nA) Epsilon 07 ATEX 2240X A

ASEP B.V. Ex ll 3G Ex nA ll T3
=CAB+BLKH-SKT54a EX Thru Bulkhead receptacle 8PS, Shell size 12 A1068673
PTB12-8PS (Ex nA) Epsilon 07 ATEX 2240X A

ASEP B.V. Ex ll 3G Ex nA ll T3
=CAB+BLKH-SKT55a EX Thru bulkhead Receptacle 5PS, Shell size 14 A1068671
PTB14-5PS (Ex nA) Epsilon 07 ATEX 2240X A

ASEP B.V. Ex ll 3G Ex nA ll T3
=CAB+BLKH-SKT56a EX Thru Bulkhead Receptacle 10PS, Shell size 12 A1068674
PTB12-10PS (Ex nA) Epsilon 07 ATEX 2240X A

NOV ASEP Elmar Ex ll 3G Ex nA ll T3


=CAB+BLKH-SKT57a RECEPTACLE 6PS E10 BULKHEAD ATX A1068672
PTB10-6PS (Ex nA) Epsilon 07 ATEX 2240X A

ASEP B.V. Ex ll 3G Ex nA ll T3
=CAB+BLKH-SKT59a EX Thru Bulkhead Receptacle 3PS, Shell size 12 A1068670
PTB12-3PS (Ex nA) Epsilon 07 ATEX 2240X A

ASEP B.V. Ex ll 3G Ex nA ll T3
=CAB+BLKH-SKT61a EX Thru Bulkhead Receptacle 3PS, Shell size 12 A1068670
PTB12-3PS (Ex nA) Epsilon 07 ATEX 2240X A

ASEP B.V. Ex ll 3G Ex nA ll T3
=CAB+BLKH-SKT62a EX Thru bulkhead Receptacle 5PS, Shell size 14 A1068671
PTB14-5PS (Ex nA) Epsilon 07 ATEX 2240X A

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
1500 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE =INF+/2600

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Hazardous area schedule = CAB + BLKH - 2500
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+-101M0


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
=CAB+BLKH/2500 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2601

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2600
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+-102H2


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2600 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2602

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2601
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+-102H3


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2601 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2603

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2602
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+-102S0


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2602 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2604

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2603
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+-102S1


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2603 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2605

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2604
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+-103U2


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2604 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2606

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2605
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+-103U4


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2605 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2607

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2606
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+-103U6


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2606 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2608

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2607
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+-103U8


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2607 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2609

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2608
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+-301S1


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2608 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2610

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2609
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+-301S2


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2609 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2611

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2610
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+-301S4


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2610 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2612

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2611
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+-301S8


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2611 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2613

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2612
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+-301S9


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2612 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2614

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2613
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+-302S6


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2613 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2615

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2614
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+-302S7


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2614 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2616

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2615
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+-305Z1


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2615 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2617

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2616
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+-305Z5


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2616 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2618

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2617
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+-ECP2


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2617 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2619

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2618
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+-ECP4


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2618 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2620

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2619
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+-PLG1


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2619 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2621

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2620
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+-PLG2


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2620 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2622

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2621
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+-PLG57


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2621 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2623

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2622
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+-SKT1


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2622 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2624

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2623
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+-SKT3


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2623 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2625

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2624
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+-SKT4


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2624 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2626

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2625
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+-SKT6


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2625 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2627

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2626
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+-SKT50


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2626 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2628

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2627
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+-SKT52


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2627 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2629

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2628
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+-SKT53


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2628 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2630

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2629
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+-SKT56


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2629 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2631

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2630
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+-SKT57


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2630 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2632

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2631
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+-SKT61


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2631 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2633

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2632
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+-SKT62


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2632 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2634

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2633
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+-SKT71


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2633 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2635

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2634
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+BLKH-SKT50a


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2634 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2636

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2635
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+BLKH-SKT51a


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2635 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2637

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2636
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+BLKH-SKT52a


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2636 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2638

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2637
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+BLKH-SKT53a


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2637 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2639

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2638
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+BLKH-SKT54a


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2638 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2640

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2639
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+BLKH-SKT55a


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2639 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2641

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2640
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+BLKH-SKT56a


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2640 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2642

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2641
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+BLKH-SKT57a


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2641 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2643

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2642
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+BLKH-SKT59a


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2642 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2644

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2643
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+BLKH-SKT61a


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2643 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2645

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2644
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+BLKH-SKT62a


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2644 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2646

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2645
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+DSHB-200S8


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2645 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2647

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2646
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+DSHB-210U8


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2646 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2648

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2647
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+DSHB-300P4


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2647 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2649

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2648
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+DSHB-301J6


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2648 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2650

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2649
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+DSHB-301R5


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2649 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2651

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2650
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+DSHB-302S1


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2650 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2652

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2651
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+DSHB-302S2


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2651 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2653

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2652
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+DSHB-302S3


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2652 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2654

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2653
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+DSHB-302S6


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2653 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2655

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2654
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+DSHB-302S7


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2654 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2656

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2655
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+DSHB-302S8


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2655 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2657

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2656
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+DSHB-303S4


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2656 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2658

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2657
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+DSHB-303S7


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2657 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2659

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2658
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+DSHB-304J5


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2658 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2660

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2659
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+DSHB-304S1


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2659 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2661

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2660
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+DSHB-304S2


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2660 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2662

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2661
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+DSHB-J1


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2661 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2663

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2662
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+DSHB-J4


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2662 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2664

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2663
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+DSHB-J5


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2663 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2665

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2664
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+DSHB-P33


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2664 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2666

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2665
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+ECP2-101D3


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2665 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2667

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2666
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+ECP2-101D4


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2666 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2668

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2667
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+ECP2-101F2.1


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2667 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2669

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2668
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+ECP2-101F4


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2668 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2670

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2669
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+ECP2-101F5


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2669 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2671

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2670
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+ECP2-101F7


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2670 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2672

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2671
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+ECP2-101F8


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2671 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2673

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2672
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+ECP2-101K3


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2672 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2674

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2673
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+ECP2-102F0.1


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2673 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2675

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2674
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+ECP2-102F5


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2674 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2676

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2675
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+ECP2-102S3


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2675 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2677

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2676
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+ECP2-102S5


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2676 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2678

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2677
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+ECP2-102S8


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2677 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2679

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2678
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+ECP2-200F1.1


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2678 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2680

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2679
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+ECP2-200F3


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2679 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2681

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2680
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+ECP2-200F4


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2680 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2682

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2681
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+ECP2-200F5


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2681 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2683

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2682
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+ECP2-300F0


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2682 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2684

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2683
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+ECP2-300F1


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2683 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2685

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2684
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+ECP2-300F2


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2684 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2686

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2685
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+ECP2-300K4


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2685 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2687

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2686
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+ECP2-300P4


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2686 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2688

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2687
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+ECP2-300R4


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2687 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2689

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2688
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+ECP2-300U0


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2688 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2690

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2689
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+ECP2-301U4


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2689 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2691

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2690
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+ECP2-302U0


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2690 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2692

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2691
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+ECP2-303K1


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2691 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2693

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2692
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+ECP2-303S7


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2692 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2694

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2693
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+ECP2-304K8


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2693 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2695

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2694
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+ECP2-304S1


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2694 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2696

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2695
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+ECP2-304S2


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2695 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2697

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2696
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+ECP2-304S3


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2696 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2698

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2697
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+ECP2-305K1


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2697 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2699

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2698
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+ECP2-305K2


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2698 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2700

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2699
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+ECP2-305K3


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2699 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2701

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2700
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+ECP2-305U5


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2700 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2702

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2701
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+ECP2-A


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2701 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2703

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2702
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+ECP2-B


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2702 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2704

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2703
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+ECP2-C


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2703 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2705

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2704
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+ECP2-D


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2704 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2706

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2705
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+ECP2-E


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2705 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2707

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2706
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+ECP2-F


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2706 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2708

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2707
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+ECP2-G


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2707 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2709

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2708
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+ECP2-H


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2708 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2710

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2709
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+ECP2-I


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2709 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2711

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2710
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+ECP2-SKTC2


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2710 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2712

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2711
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+ECP4-200F0


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2711 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2713

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2712
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+ECP4-200F2


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2712 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2714

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2713
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+ECP4-200F3


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2713 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2715

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2714
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+ECP4-200K3


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2714 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2716

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2715
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+ECP4-200K4


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2715 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2717

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2716
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+ECP4-300F0


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2716 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2718

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2717
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+ECP4-300F1


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2717 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2719

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2718
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+ECP4-300F2


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2718 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2720

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2719
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+ECP4-300K4


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2719 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2721

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2720
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+ECP4-300R9


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2720 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2722

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2721
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+ECP4-300U0


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2721 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2723

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2722
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+ECP4-301K1


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2722 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2724

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2723
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+ECP4-305D1


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2723 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2725

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2724
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+ECP4-305K0


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2724 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2726

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2725
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+ECP4-SKTC2


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2725 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2727

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2726
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+EJB10


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2726 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2728

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2727
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+EJB11


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2727 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE 2729

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2728
0 1 2 3 4 5 6 7 8 9

Electrical inspection sheet =CAB+EJB14


The following checklist can be used for complete Junction boxes or for single apparatus only. Ex D Ex E Ex n Satisfactory Faulty Repaired N/A Replaced or repaired components

Apparatus is appropriate to area classification (JB / SA) X X X

Apparatus group is correct (JB / SA) X X X

Apparatus temperature class is correct (JB / SA) X X X

Apparatus circuit identification is correct (JB / SA) X X X

Apparatus circuit identification is available (JB / SA) X X X

Enclosure, glass parts and glass-to-metal sealing gaskets and/or compounds are satisfactory (JB) X X X

There are no unauthorized modifications (JB / SA) X X X

Physically check whether bolts, cable entry devices (direct and indirect) and blanking elements are of the correct type and are
X X X
Apparatus

complete and tight (JB)

Flange faces are clean and undamaged and gaskets, if any, are satisfactory (JB) X

Flange gap dimensions are within maximal values permitted (JB) X

Lamp rating, type and position are correct (SA) X X X

Electrical connections are tight (JB / SA) X X

Condition of enclosure gaskets is satisfactory X X

Enclosed-break and hermetically sealed devices are undamaged (SA) X

Restricted breathing enclosure is satisfactory (SA) X

Motor fans have sufficient clearance to enclosure and/or covers (JB / SA) X X X

Breathing and draining devices are satisfactory (JB / SA) X X X

Type of cable is appropriate X X X

There is no obvious damage to cables X X X

Sealing of trunking, ducts, pipes and/or conduits is satisfactory X X X

Stopping boxes and cable boxes are correctly filled X

Integrity of conduit system and interface with mixed system is maintained X X X

Physically check whether earthing connections, including any supplementary earthing bonding connections are satisfactory (for
X X X
example connections are tight and conductors are of sufficient cross-section)
Installation

Fault loop impedance (TN systems) or earthing resistance (IT systems) is satisfactory X X X

Insulation resistance is satisfactory X X X

Automatic electrical protective devices operate within permitted limits X X X


Inspected by :
Automatic electrical protective devices are set correctly (auto-reset not possible) X X X

Special conditions of use (if applicable) are complied with X X X

Cables not in use are correctly terminated X X X Signature :


Obstructions adjacent to flameproof flanged joints are in accordance with IEC 60079-14 X

Variable voltage/frequency installation in accordance with documentation X X X


Date :
Apparatus is adequately protected against corrosion, weather, vibration and other adverse factors X X X
Enviroment

No undue accumulation of dust and dirt X X X


Unit serial no. :
Electrical insulation is clean and dry X X X

THIS DRAWING IS THE PROPERTY OF ELMAR NOV. IT MUST NOT BE ALTERED, COPIED IN ANY MEDIUM OR SHOWN TO PERMISSION
2728 PREVIOUS PAGE
AND IS SUBMITTED WITHOUT PREJUDICE TO ANY PATENTS OR DESIGNS PENDING OR TO BE APPLIED FOR BY THE COMPANY
NEXT PAGE

C 8974
G.Martina
M. Kleijn M. Kleijn RELEASED TITLE : CABIN EXTRA LONG DATASPLIT C HIGHER LEVEL LOCATION PAGE:
16-09-2011 ASSIGNMENT: DESIGNATION:

REV. ECO DRAWN CHECKED APPROVED PRINT STATUS National Oilwell Varco Corporate Headquarters
DRAWING No. : ES6931033757
Format: A4 PAGE MOD 16.Sep.2011
7909 Parkwood Circle Dr. Houston, TX 77036
Phone: 1 888 262 8645 www.NOV.com/ASEPElmar
PAGE DESCRIPTION : Electrical inspection sheet = INF + - 2729

You might also like