Professional Documents
Culture Documents
Other Details:
# Parameter Details
5 Size of sheet / 6000 mm Long x 475 mm wide overall. (Cover width 406 mm to 550 mm)
Profile
6 Roofing dimensions Roofing shall be approx. 6.20 Kgs/sqmtr.
Recommended span for wind load as per IS-875-1993
Roofing sheets according to the site requirement. The overall profile width of the
sheet is 400 to 550 mm
7 Method of Laying of The sheets are to be fastened to roof purlins with the help of special type of fixing
sheets clips and self drilling Zinc coating fasteners of 12x25 mm size. These sheets do
not required any fastening holes through the sheets. The two fasteners are
inserted only through the two punched holes. Four dimples are also provided in
clip but there are not for auxiliary fasteners but for provided strength to the clip
only. The clip has a short return leg & a long return leg. The clip must be
positioned with the short leg engaging over the female rib of under lapping sheet.
The supply of sheets shall be factory cut in required length as per the site
requirement.
8 Ridge Capping / Ridges / Flashing will be supplied in required width of the similar roof material up
Flashing to a length of 2500 mm and will be fixed with the help of self drilling. Zinc coated
fasteners of size 12x25mm at a max of 500 mm centre to centre gap in length.